| /schemata/Layou1.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Layou2.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Layout.err |
|---|
| 0,0 → 1,3 |
| Reading file -- C:\Program Files\Mentor Graphics\PADS\2005_1\Settings\default.asc |
| **NO ERRORS FOUND** |
| /schemata/Layout.log |
|---|
| 0,0 → 1,18 |
| PADS Layout ECO Generator (Version 6.1b) 21.6.2006 20:43:55 |
| Copyright (c) 2003 Mentor Graphics Corp. - All rights reserved |
| ASCII reading (part types and decals) - 5 msec |
| ASCII reading (part types and decals) - 5 msec |
| Reading the OLD DESIGN |
| There are 19 parts in the design |
| There are 14 signals in the design |
| There are 49 pins in the design |
| ASCII reading (parts, nets, attributes) - 18 msec |
| Reading the NEW DESIGN |
| There are 21 parts in the design |
| There are 14 signals in the design |
| There are 53 pins in the design |
| ASCII reading (parts, nets, attributes) - 15 msec |
| Final cost=416 |
| Partitioning - 1 msec |
| Final Matching - 1 msec |
| Deleted pins: 3, Added pins: 7 |
| /schemata/Layout.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Layout.rep |
|---|
| 0,0 → 1,45 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* old file: D:\KAKLIK\schemata\ecogtmp0.asc |
| *REMARK* new file: D:\KAKLIK\schemata\ecogtmp1.asc |
| *REMARK* created by ECOGEN (Version 6.1b) on 21.6.2006 20:43:55 |
| PART DIFFERENCES |
| ---------------- |
| OLD DESIGN NEW DESIGN |
| Ref-des Part-type:Decal Ref-des Part-type:Decal |
| D1 LED <none> |
| <none> C3 C |
| <none> J1 SCW2 |
| <none> J2 SCW2 |
| NET DIFFERENCES |
| ---------------- |
| OLD DESIGN NEW DESIGN |
| <none> N03786 |
| SWAPPED GATE DIFFERENCES |
| ------------------------ |
| OLD DESIGN NEW DESIGN |
| SWAPPED PIN DIFFERENCES |
| ------------------------ |
| OLD DESIGN NEW DESIGN |
| UNMATCHED NET PINS IN OLD DESIGN |
| -------------------------------- |
| N03786 D1.C Q1.C |
| VCC D1.A |
| UNMATCHED NET PINS IN NEW DESIGN |
| -------------------------------- |
| GND J1.1 C3.2 |
| N03786 J2.2 Q1.C |
| VCC C3.1 J2.1 J1.2 |
| ATTRIBUTE DIFFERENCES |
| --------------------- |
| Attribute Level [ OLD DESIGN Parent -> NEW DESIGN Parent ] |
| Attribute Name Old Value New Value |
| /schemata/Logic.err |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| /Motory/AC_3F/MOTOR BOARD.DBK |
|---|
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/MOTOR BOARD.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/MOTOR BOARD.EDN |
|---|
| 0,0 → 1,237 |
| (edif (rename LED_board "LED board") |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2002 06 02 13 31 40) |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 23, 2002") |
| (comment "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell R |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT))))) |
| (cell JUMPER5 |
| (cellType generic) |
| (comment "From OrCAD library CONNECTOR.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT))))) |
| (cell LED |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell (rename LED_board "LED board") |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance R1 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R2 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R3 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R4 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R5 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R6 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R7 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R8 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMPER5 |
| (libraryRef OrCAD_LIB)))) |
| (instance D1 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D2 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D3 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D4 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D5 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D6 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D7 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D8 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D9 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (net N05262 |
| (joined |
| (portRef &2 (instanceRef D7)))) |
| (net N05090 |
| (joined |
| (portRef &2 (instanceRef D5)))) |
| (net N05060 |
| (joined |
| (portRef &2 (instanceRef D3)))) |
| (net N05075 |
| (joined |
| (portRef &2 (instanceRef D4)))) |
| (net N05105 |
| (joined |
| (portRef &2 (instanceRef D6)))) |
| (net N05045 |
| (joined |
| (portRef &2 (instanceRef D2)))) |
| (net N05895 |
| (joined |
| (portRef &2 (instanceRef D8)))) |
| (net N06519 |
| (joined |
| (portRef &2 (instanceRef D1)))) |
| (net N06561 |
| (joined |
| (portRef &1 (instanceRef D9)) |
| (portRef &9 (instanceRef J3)))) |
| (net N05788 |
| (joined |
| (portRef &2 (instanceRef D9)) |
| (portRef &10 (instanceRef J3)))) |
| (net N02327 |
| (joined |
| (portRef &2 (instanceRef R5)) |
| (portRef &5 (instanceRef J3)))) |
| (net N000910 |
| (joined |
| (portRef &1 (instanceRef R5)) |
| (portRef &1 (instanceRef D5)))) |
| (net N02513 |
| (joined |
| (portRef &2 (instanceRef R6)) |
| (portRef &6 (instanceRef J3)))) |
| (net N001130 |
| (joined |
| (portRef &1 (instanceRef D6)) |
| (portRef &1 (instanceRef R6)))) |
| (net N02272 |
| (joined |
| (portRef &2 (instanceRef R7)) |
| (portRef &7 (instanceRef J3)))) |
| (net N001350 |
| (joined |
| (portRef &1 (instanceRef D7)) |
| (portRef &1 (instanceRef R7)))) |
| (net N02086 |
| (joined |
| (portRef &8 (instanceRef J3)) |
| (portRef &2 (instanceRef R8)))) |
| (net N001570 |
| (joined |
| (portRef &1 (instanceRef D8)) |
| (portRef &1 (instanceRef R8)))) |
| (net N07364 |
| (joined |
| (portRef &2 (instanceRef R1)) |
| (portRef &1 (instanceRef J3)))) |
| (net N000030 |
| (joined |
| (portRef &1 (instanceRef D1)) |
| (portRef &1 (instanceRef R1)))) |
| (net N04007 |
| (joined |
| (portRef &2 (instanceRef J3)) |
| (portRef &2 (instanceRef R2)))) |
| (net N000250 |
| (joined |
| (portRef &1 (instanceRef D2)) |
| (portRef &1 (instanceRef R2)))) |
| (net N02382 |
| (joined |
| (portRef &3 (instanceRef J3)) |
| (portRef &2 (instanceRef R3)))) |
| (net N000470 |
| (joined |
| (portRef &1 (instanceRef R3)) |
| (portRef &1 (instanceRef D3)))) |
| (net N03322 |
| (joined |
| (portRef &2 (instanceRef R4)) |
| (portRef &4 (instanceRef J3)))) |
| (net N000690 |
| (joined |
| (portRef &1 (instanceRef R4)) |
| (portRef &1 (instanceRef D4)))))))) |
| (design (rename LED_board "LED board") |
| (cellRef LED_board |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/AC_3F/MOTOR BOARD.ERR |
|---|
| 0,0 → 1,4 |
| AutoECO Error Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| No errors found |
| /schemata/Motory/AC_3F/MOTOR BOARD.EXP |
|---|
| 0,0 → 1,0 |
| "DESIGN" "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" "LOGICAL" |
| /schemata/Motory/AC_3F/MOTOR BOARD.LIS |
|---|
| 0,0 → 1,57 |
| AutoECO Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| If "*EOF*" immediately follows, no changes were made |
| Adding footprint R |
| Adding package R |
| Adding package LED |
| Adding package JUMPER5 |
| Adding component R6 |
| Adding component D1 |
| Found library footprint with same name as part LED |
| Adding component D2 |
| Adding component R7 |
| Adding component D3 |
| Adding component D4 |
| Adding component R1 |
| Adding component R8 |
| Adding component D5 |
| Adding component R2 |
| Adding component D6 |
| Adding component D7 |
| Adding component D9 |
| Adding component R3 |
| Adding component D8 |
| Adding component R4 |
| Adding component R5 |
| Adding component J3 |
| Found footprint BLKCON.100/VH/TM2OE/W.200/10 from PRT file for part JUMPER5, comp J3 |
| Adding net N000250 |
| Adding net N000470 |
| Adding net N000690 |
| Adding net N000910 |
| Adding net N001130 |
| Adding net N001350 |
| Adding net N001570 |
| Adding net N05262 |
| Adding net N05090 |
| Adding net N05060 |
| Adding net N05075 |
| Adding net N05105 |
| Adding net N05045 |
| Adding net N05895 |
| Adding net N06519 |
| Adding net N000030 |
| Adding net N02513 |
| Adding net N02382 |
| Adding net N02272 |
| Adding net N02327 |
| Adding net N06561 |
| Adding net N05788 |
| Adding net N03322 |
| Adding net N02086 |
| Adding net N07364 |
| Adding net N04007 |
| Deleting net DEFAULT |
| *EOF* |
| No errors found |
| /schemata/Motory/AC_3F/MOTOR BOARD.MAX |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/MOTOR BOARD.MNL |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/MOTOR BOARD.NET |
|---|
| 0,0 → 1,125 |
| (netlist "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" |
| (compinst "D1" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D2" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D3" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D4" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D5" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D6" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D7" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D8" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D9" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "J3" |
| (patternName "JUMPER5") |
| (compvalue "JUMPER5")) |
| (compinst "R1" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R2" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R3" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R4" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R5" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R6" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R7" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R8" |
| (patternName "R") |
| (compvalue "220")) |
| (net "N000250" |
| (node "D2" "1") |
| (node "R2" "1")) |
| (net "N000470" |
| (node "R3" "1") |
| (node "D3" "1")) |
| (net "N000690" |
| (node "R4" "1") |
| (node "D4" "1")) |
| (net "N000910" |
| (node "R5" "1") |
| (node "D5" "1")) |
| (net "N001130" |
| (node "D6" "1") |
| (node "R6" "1")) |
| (net "N001350" |
| (node "D7" "1") |
| (node "R7" "1")) |
| (net "N001570" |
| (node "D8" "1") |
| (node "R8" "1")) |
| (net "N05262" |
| (node "D7" "2")) |
| (net "N05090" |
| (node "D5" "2")) |
| (net "N05060" |
| (node "D3" "2")) |
| (net "N05075" |
| (node "D4" "2")) |
| (net "N05105" |
| (node "D6" "2")) |
| (net "N05045" |
| (node "D2" "2")) |
| (net "N05895" |
| (node "D8" "2")) |
| (net "N06519" |
| (node "D1" "2")) |
| (net "N000030" |
| (node "D1" "1") |
| (node "R1" "1")) |
| (net "N02513" |
| (node "R6" "2") |
| (node "J3" "6")) |
| (net "N02382" |
| (node "J3" "3") |
| (node "R3" "2")) |
| (net "N02272" |
| (node "R7" "2") |
| (node "J3" "7")) |
| (net "N02327" |
| (node "R5" "2") |
| (node "J3" "5")) |
| (net "N06561" |
| (node "D9" "1") |
| (node "J3" "9")) |
| (net "N05788" |
| (node "D9" "2") |
| (node "J3" "10")) |
| (net "N03322" |
| (node "R4" "2") |
| (node "J3" "4")) |
| (net "N02086" |
| (node "J3" "8") |
| (node "R8" "2")) |
| (net "N07364" |
| (node "R1" "2") |
| (node "J3" "1")) |
| (net "N04007" |
| (node "J3" "2") |
| (node "R2" "2"))) |
| /schemata/Motory/AC_3F/MOTOR BOARD.ONL |
|---|
| 0,0 → 1,265 |
| (PCB "MOTOR BOARD" |
| (description |
| (timeStamp "2002 06 02 07 16 34") |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Saturday, March 23, 2002") |
| (document "D:\\@KAKLIK\\MOTOR\\MOTOR BOARD.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMPER5 |
| (place J3 |
| (property |
| (timestamp 00000683) |
| ("Source Package" JUMPER5) |
| (Value JUMPER5)))) |
| (component LED |
| (place D1 |
| (property |
| (timestamp 00000003) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D2 |
| (property |
| (timestamp 00000019) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D3 |
| (property |
| (timestamp 0000002F) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D4 |
| (property |
| (timestamp 00000045) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D5 |
| (property |
| (timestamp 0000005B) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D6 |
| (property |
| (timestamp 00000071) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D7 |
| (property |
| (timestamp 00000087) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D8 |
| (property |
| (timestamp 0000009D) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D9 |
| (property |
| (timestamp 00001905) |
| ("Source Package" LED) |
| (Value LED)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000227) |
| ("Source Package" R) |
| (Value 220))) |
| (place R2 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000024A) |
| ("Source Package" R) |
| (Value 220))) |
| (place R3 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000026D) |
| ("Source Package" R) |
| (Value 220))) |
| (place R4 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000290) |
| ("Source Package" R) |
| (Value 220))) |
| (place R5 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002B3) |
| ("Source Package" R) |
| (Value 220))) |
| (place R6 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002D6) |
| ("Source Package" R) |
| (Value 220))) |
| (place R7 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002F9) |
| ("Source Package" R) |
| (Value 220))) |
| (place R8 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000031C) |
| ("Source Package" R) |
| (Value 220))))) |
| (library |
| (image R |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMPER5 |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\CONNECTOR.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4)))) |
| (image LED |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname ANODE) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname CATHODE) |
| (pintype 4))))) |
| (network |
| (net N000250 |
| (pins |
| D2-1 R2-1)) |
| (net N000470 |
| (pins |
| R3-1 D3-1)) |
| (net N000690 |
| (pins |
| R4-1 D4-1)) |
| (net N000910 |
| (pins |
| R5-1 D5-1)) |
| (net N001130 |
| (pins |
| D6-1 R6-1)) |
| (net N001350 |
| (pins |
| D7-1 R7-1)) |
| (net N001570 |
| (pins |
| D8-1 R8-1)) |
| (net N05262 |
| (pins |
| D7-2)) |
| (net N05090 |
| (pins |
| D5-2)) |
| (net N05060 |
| (pins |
| D3-2)) |
| (net N05075 |
| (pins |
| D4-2)) |
| (net N05105 |
| (pins |
| D6-2)) |
| (net N05045 |
| (pins |
| D2-2)) |
| (net N05895 |
| (pins |
| D8-2)) |
| (net N06519 |
| (pins |
| D1-2)) |
| (net N000030 |
| (pins |
| D1-1 R1-1)) |
| (net N02513 |
| (pins |
| R6-2 J3-6)) |
| (net N02382 |
| (pins |
| J3-3 R3-2)) |
| (net N02272 |
| (pins |
| R7-2 J3-7)) |
| (net N02327 |
| (pins |
| R5-2 J3-5)) |
| (net N06561 |
| (pins |
| D9-1 J3-9)) |
| (net N05788 |
| (pins |
| D9-2 J3-10)) |
| (net N03322 |
| (pins |
| R4-2 J3-4)) |
| (net N02086 |
| (pins |
| J3-8 R8-2)) |
| (net N07364 |
| (pins |
| R1-2 J3-1)) |
| (net N04007 |
| (pins |
| J3-2 R2-2))) |
| ) |
| /schemata/Motory/AC_3F/TEST.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/TEST.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/TRANZISTORY.LLB |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/ULN2003.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/ULN2003.DRC |
|---|
| 0,0 → 1,104 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking Off-Page Connections |
| Checking Pin to Port Connections |
| Checking for Invalid References |
| Checking for Duplicate References |
| Checking for Compatibility with SDT |
| Reporting Off-Grid Objects |
| Reporting Net Names |
| N36937 |
| N37144 |
| N37348 |
| N37007 |
| N37211 |
| N36870 |
| N37074 |
| N37418 |
| N37281 |
| N36800 |
| N40223 |
| N40337 |
| N40406 |
| N42209 |
| N42326 |
| N41046 |
| N42437 |
| N42556 |
| N42675 |
| N42794 |
| N43077 |
| N43185 |
| N43293 |
| N43401 |
| N25451 |
| N19393 |
| N13996 |
| N13617 |
| N14493 |
| N13703 |
| N19493 |
| N15219 |
| N13531 |
| N14688 |
| N13359 |
| N14585 |
| N25474 |
| N14796 |
| N15322 |
| N19443 |
| N25409 |
| N15006 |
| N14903 |
| N13445 |
| N18998 |
| N19048 |
| N19217 |
| N40597 |
| N19163 |
| N51332 |
| N37732 |
| N37627 |
| N51243 |
| N37522 |
| N51109 |
| N55592 |
| N54463 |
| N50188 |
| N50158 |
| N38097 |
| N53250 |
| N53070 |
| N38198 |
| N50008 |
| N50032 |
| +5V |
| VCC |
| Alternate Name: Vcc |
| GND |
| N61737 |
| N60796 |
| N61407 |
| N61514 |
| N61077 |
| N60981 |
| N61630 |
| N60885 |
| N61173 |
| N60391 |
| N59355 |
| N59497 |
| /schemata/Motory/AC_3F/ULN2003.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/ULN2003.EDN |
|---|
| 0,0 → 1,520 |
| (edif SCHEMATIC1 |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2003 03 27 12 18 04) |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 22, 2003") |
| (comment "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell DB9F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT))))) |
| (cell DB25M |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DB25F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DIP16_300 |
| (cellType generic) |
| (comment "From OrCAD library DECALES.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell ULN2003 |
| (cellType generic) |
| (comment "From OrCAD library RUZNE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell JUMP3 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT))))) |
| (cell JUMP5 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT))))) |
| (cell JUMP4 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT))))) |
| (cell JUMP8 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT))))) |
| (cell PHONEJACKSTEREO |
| (cellType generic) |
| (comment "From OrCAD library _SENO_.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &3 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &1 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell SCHEMATIC1 |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance CON2 |
| (viewRef NetlistView |
| (cellRef DB9F |
| (libraryRef OrCAD_LIB)))) |
| (instance CON4 |
| (viewRef NetlistView |
| (cellRef DB25M |
| (libraryRef OrCAD_LIB)))) |
| (instance CON5 |
| (viewRef NetlistView |
| (cellRef DB25F |
| (libraryRef OrCAD_LIB)))) |
| (instance U1 |
| (viewRef NetlistView |
| (cellRef DIP16_300 |
| (libraryRef OrCAD_LIB)))) |
| (instance U2 |
| (viewRef NetlistView |
| (cellRef ULN2003 |
| (libraryRef OrCAD_LIB)))) |
| (instance J11 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J12 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J13 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J14 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J1 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J2 |
| (viewRef NetlistView |
| (cellRef JUMP4 |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMP8 |
| (libraryRef OrCAD_LIB)))) |
| (instance J4 |
| (viewRef NetlistView |
| (cellRef PHONEJACKSTEREO |
| (libraryRef OrCAD_LIB)))) |
| (instance J5 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J6 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J7 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J8 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (net N19443 |
| (joined |
| (portRef &4 (instanceRef CON2)) |
| (portRef &6 (instanceRef U1)) |
| (portRef &2 (instanceRef J6)))) |
| (net N13996 |
| (joined |
| (portRef &2 (instanceRef J2)) |
| (portRef &14 (instanceRef CON4)) |
| (portRef &3 (instanceRef U1)))) |
| (net N19393 |
| (joined |
| (portRef &3 (instanceRef CON2)) |
| (portRef &5 (instanceRef U1)) |
| (portRef &1 (instanceRef J6)))) |
| (net N19493 |
| (joined |
| (portRef &7 (instanceRef CON2)) |
| (portRef &7 (instanceRef U1)) |
| (portRef &3 (instanceRef J6)))) |
| (net N25451 |
| (joined |
| (portRef &4 (instanceRef U1)) |
| (portRef &3 (instanceRef J2)) |
| (portRef &16 (instanceRef CON4)))) |
| (net N25409 |
| (joined |
| (portRef &1 (instanceRef J2)) |
| (portRef &1 (instanceRef CON4)) |
| (portRef &2 (instanceRef U1)))) |
| (net N15322 |
| (joined |
| (portRef &2 (instanceRef CON4)) |
| (portRef &8 (instanceRef J3)) |
| (portRef &1 (instanceRef U1)))) |
| (net N13359 |
| (joined |
| (portRef &10 (instanceRef CON4)) |
| (portRef &5 (instanceRef J1)) |
| (portRef &10 (instanceRef CON5)))) |
| (net N13445 |
| (joined |
| (portRef &11 (instanceRef CON4)) |
| (portRef &4 (instanceRef J1)) |
| (portRef &11 (instanceRef CON5)))) |
| (net N13531 |
| (joined |
| (portRef &12 (instanceRef CON4)) |
| (portRef &3 (instanceRef J1)) |
| (portRef &12 (instanceRef CON5)))) |
| (net N13617 |
| (joined |
| (portRef &13 (instanceRef CON4)) |
| (portRef &2 (instanceRef J1)) |
| (portRef &13 (instanceRef CON5)))) |
| (net N36937 |
| (joined |
| (portRef &20 (instanceRef CON4)) |
| (portRef &1 (instanceRef J13)))) |
| (net N37144 |
| (joined |
| (portRef &21 (instanceRef CON5)) |
| (portRef &2 (instanceRef J12)))) |
| (net N37348 |
| (joined |
| (portRef &23 (instanceRef CON4)) |
| (portRef &1 (instanceRef J8)))) |
| (net N37007 |
| (joined |
| (portRef &20 (instanceRef CON5)) |
| (portRef &2 (instanceRef J13)))) |
| (net N37211 |
| (joined |
| (portRef &22 (instanceRef CON4)) |
| (portRef &1 (instanceRef J11)))) |
| (net N36870 |
| (joined |
| (portRef &19 (instanceRef CON5)) |
| (portRef &2 (instanceRef J14)))) |
| (net N37074 |
| (joined |
| (portRef &21 (instanceRef CON4)) |
| (portRef &1 (instanceRef J12)))) |
| (net N37418 |
| (joined |
| (portRef &23 (instanceRef CON5)) |
| (portRef &2 (instanceRef J8)))) |
| (net N37281 |
| (joined |
| (portRef &22 (instanceRef CON5)) |
| (portRef &2 (instanceRef J11)))) |
| (net N36800 |
| (joined |
| (portRef &19 (instanceRef CON4)) |
| (portRef &1 (instanceRef J14)))) |
| (net N28601 |
| (joined |
| (portRef &24 (instanceRef CON4)) |
| (portRef &2 (instanceRef J7)))) |
| (net N13703 |
| (joined |
| (portRef &15 (instanceRef CON4)) |
| (portRef &1 (instanceRef J1)) |
| (portRef &15 (instanceRef CON5)))) |
| (net N25474 |
| (joined |
| (portRef &17 (instanceRef CON4)) |
| (portRef &4 (instanceRef J2)) |
| (portRef &17 (instanceRef CON5)))) |
| (net N40223 |
| (joined |
| (portRef &10 (instanceRef U1)) |
| (portRef &3 (instanceRef J14)))) |
| (net N40337 |
| (joined |
| (portRef &11 (instanceRef U1)) |
| (portRef &3 (instanceRef J13)))) |
| (net N40406 |
| (joined |
| (portRef &12 (instanceRef U1)) |
| (portRef &3 (instanceRef J12)))) |
| (net N19163 |
| (joined |
| (portRef &6 (instanceRef CON2)) |
| (portRef &3 (instanceRef J5)))) |
| (net N19217 |
| (joined |
| (portRef &4 (instanceRef J5)) |
| (portRef &8 (instanceRef CON2)))) |
| (net N19271 |
| (joined |
| (portRef &9 (instanceRef CON2)) |
| (portRef &5 (instanceRef J5)))) |
| (net N19048 |
| (joined |
| (portRef &2 (instanceRef CON2)) |
| (portRef &3 (instanceRef J11)) |
| (portRef &2 (instanceRef J5)))) |
| (net N18998 |
| (joined |
| (portRef &1 (instanceRef J5)) |
| (portRef &1 (instanceRef CON2)) |
| (portRef &3 (instanceRef J8)))) |
| (net N14796 |
| (joined |
| (portRef &4 (instanceRef J3)) |
| (portRef &4 (instanceRef U2)) |
| (portRef &6 (instanceRef CON4)))) |
| (net N15006 |
| (joined |
| (portRef &4 (instanceRef CON4)) |
| (portRef &6 (instanceRef U2)) |
| (portRef &6 (instanceRef J3)))) |
| (net N14903 |
| (joined |
| (portRef &5 (instanceRef CON4)) |
| (portRef &5 (instanceRef U2)) |
| (portRef &5 (instanceRef J3)))) |
| (net N14585 |
| (joined |
| (portRef &8 (instanceRef CON4)) |
| (portRef &2 (instanceRef U2)) |
| (portRef &2 (instanceRef J3)))) |
| (net N14688 |
| (joined |
| (portRef &7 (instanceRef CON4)) |
| (portRef &3 (instanceRef J3)) |
| (portRef &3 (instanceRef U2)))) |
| (net N14493 |
| (joined |
| (portRef &1 (instanceRef J3)) |
| (portRef &9 (instanceRef CON4)) |
| (portRef &1 (instanceRef U2)))) |
| (net N15219 |
| (joined |
| (portRef &3 (instanceRef CON4)) |
| (portRef &7 (instanceRef U2)) |
| (portRef &7 (instanceRef J3)))) |
| (net N42209 |
| (joined |
| (portRef &15 (instanceRef U2)) |
| (portRef &8 (instanceRef CON5)))) |
| (net (rename PLUSV "+V") |
| (joined |
| (portRef &9 (instanceRef U1)) |
| (portRef &3 (instanceRef J4)) |
| (portRef &2 (instanceRef J4)) |
| (portRef &1 (instanceRef J7)) |
| (portRef &24 (instanceRef CON5)) |
| (portRef &9 (instanceRef U2)))) |
| (net N42326 |
| (joined |
| (portRef &14 (instanceRef U2)) |
| (portRef &7 (instanceRef CON5)))) |
| (net N41046 |
| (joined |
| (portRef &16 (instanceRef U2)) |
| (portRef &9 (instanceRef CON5)))) |
| (net N42437 |
| (joined |
| (portRef &13 (instanceRef U2)) |
| (portRef &6 (instanceRef CON5)))) |
| (net N42556 |
| (joined |
| (portRef &12 (instanceRef U2)) |
| (portRef &5 (instanceRef CON5)))) |
| (net N42675 |
| (joined |
| (portRef &11 (instanceRef U2)) |
| (portRef &4 (instanceRef CON5)))) |
| (net N42794 |
| (joined |
| (portRef &10 (instanceRef U2)) |
| (portRef &3 (instanceRef CON5)))) |
| (net GND |
| (joined |
| (portRef &5 (instanceRef CON2)) |
| (portRef &25 (instanceRef CON4)) |
| (portRef &8 (instanceRef U2)) |
| (portRef &8 (instanceRef U1)) |
| (portRef &18 (instanceRef CON4)) |
| (portRef &1 (instanceRef J4)) |
| (portRef &3 (instanceRef J7)) |
| (portRef &25 (instanceRef CON5)) |
| (portRef &18 (instanceRef CON5)))) |
| (net N43077 |
| (joined |
| (portRef &16 (instanceRef U1)) |
| (portRef &2 (instanceRef CON5)))) |
| (net N43185 |
| (joined |
| (portRef &15 (instanceRef U1)) |
| (portRef &1 (instanceRef CON5)))) |
| (net N43293 |
| (joined |
| (portRef &14 (instanceRef U1)) |
| (portRef &14 (instanceRef CON5)))) |
| (net N43401 |
| (joined |
| (portRef &13 (instanceRef U1)) |
| (portRef &16 (instanceRef CON5)))))))) |
| (design SCHEMATIC1 |
| (cellRef SCHEMATIC1 |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/AC_3F/ULN2003.ONL |
|---|
| 0,0 → 1,962 |
| (PCB ULN2003 |
| (description |
| (timeStamp "2003 03 07 16 13 27") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Friday, March 07, 2003") |
| (document "D:\\@KAKLIK\\SCHEMATA\\MOTOR\\ULN2003.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP1 |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010D0D) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010D31) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J4 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010DA7) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J5 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010DC1) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component DB25F |
| (place CON5 |
| (property |
| ("PCB Footprint" CANNON25F_90) |
| (Device DB25F) |
| (timestamp 0000802E) |
| ("Source Package" DB25F) |
| (Value PRINT_OUT)))) |
| (component JUMP3 |
| (place J11 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 0000959E) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J12 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 000095B8) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J13 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 000095D2) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J14 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 000095EC) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J8 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 00009584) |
| ("Source Package" JUMP3) |
| (Value JUMP3)))) |
| (component JUMP5 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP5) |
| (Device JUMP5) |
| (timestamp 00010384) |
| ("Source Package" JUMP5) |
| (Value vstup_com)))) |
| (component DIP16_300 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000003) |
| ("Source Package" DIP16_300) |
| (Value ULN2003)))) |
| (component DB25M |
| (place CON4 |
| (property |
| ("PCB Footprint" CANNON25M_90) |
| (Device DB25M) |
| (timestamp 00007C8F) |
| ("Source Package" DB25M) |
| (Value PRINT_IN)))) |
| (component KP_1040 |
| (place U3 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 0000B8E8) |
| ("Source Package" KP_1040) |
| (Value KP_1040))) |
| (place U4 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 0000B936) |
| ("Source Package" KP_1040) |
| (Value KP_1040)))) |
| (component ULN2003 |
| (place U2 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 0000477B) |
| ("Source Package" ULN2003) |
| (Value ULN2003)))) |
| (component DB9F |
| (place CON2 |
| (property |
| ("PCB Footprint" CANNON9F_90) |
| (Device DB9F) |
| (timestamp 000048B5) |
| ("Source Package" DB9F) |
| (Value COM_IN)))) |
| (component CROSS |
| (place M1 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 000014D3) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M2 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C4C) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M3 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C60) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M4 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C74) |
| ("Source Package" CROSS) |
| (Value CROSS)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DF37) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DF4D) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DF63) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DFE9) |
| ("Source Package" R) |
| (Value R))) |
| (place R5 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E158) |
| ("Source Package" R) |
| (Value R))) |
| (place R7 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E1E9) |
| ("Source Package" R) |
| (Value R))) |
| (place R8 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E31A) |
| ("Source Package" R) |
| (Value R))) |
| (place R9 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E37F) |
| ("Source Package" R) |
| (Value R))))) |
| (library |
| (image DB9F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB9F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4)))) |
| (image DB25M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DB25F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DIP16_300 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\DECALES.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4)))) |
| (image ULN2003 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4)))) |
| (image KP_1040 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMP3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP3)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image CROSS |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SYMBOLS.OLB) |
| (Device CROSS))) |
| (image JUMP5 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP5)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4)))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))))) |
| (network |
| (net N42794 |
| (pins |
| U2-10 CON5-3)) |
| (net N43077 |
| (pins |
| U1-16 CON5-2)) |
| (net N43185 |
| (pins |
| U1-15 CON5-1)) |
| (net N43293 |
| (pins |
| U1-14 CON5-14)) |
| (net N43401 |
| (pins |
| U1-13 CON5-16)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| U1-9 CON5-24 J4-1 U2-9)) |
| (net +5V |
| (property |
| (nettype S)) |
| (pins |
| U3-16 U3-14 U3-12 U3-10 U4-10 U4-14 U4-16 U4-12 J2-1)) |
| (net N18998 |
| (pins |
| J1-1 CON2-1 U3-15)) |
| (net N19048 |
| (pins |
| CON2-2 U3-13 J1-2)) |
| (net N19163 |
| (pins |
| CON2-6 U4-9)) |
| (net N19217 |
| (pins |
| J1-4 CON2-8)) |
| (net N19393 |
| (pins |
| U1-5 CON2-3)) |
| (net N19443 |
| (pins |
| CON2-4 U1-6)) |
| (net N19493 |
| (pins |
| CON2-7 U1-7)) |
| (net N13359 |
| (pins |
| CON4-10 U4-15)) |
| (net N13445 |
| (pins |
| CON4-11 U4-13)) |
| (net N13531 |
| (pins |
| CON4-12 U4-11)) |
| (net N13617 |
| (pins |
| CON4-13 U3-9)) |
| (net N13703 |
| (pins |
| CON4-15 U3-11)) |
| (net N14585 |
| (pins |
| CON4-8 U2-2)) |
| (net N14796 |
| (pins |
| U2-4 CON4-6)) |
| (net N14493 |
| (pins |
| CON4-9 U2-1)) |
| (net N14903 |
| (pins |
| CON4-5 U2-5)) |
| (net N15006 |
| (pins |
| CON4-4 U2-6)) |
| (net N15322 |
| (pins |
| CON4-2 U1-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| CON4-24 CON4-25 U2-8 U1-8 CON4-18 CON5-25 CON5-18 U3-2 U3-4 |
| U3-6 U3-8 U4-2 U4-4 U4-6 U4-8 CON2-5 J3-1 J5-1)) |
| (net N15219 |
| (pins |
| CON4-3 U2-7)) |
| (net N25409 |
| (pins |
| CON4-1 U1-2)) |
| (net N13996 |
| (pins |
| CON4-14 U1-3)) |
| (net N25451 |
| (pins |
| U1-4 CON4-16)) |
| (net N25474 |
| (pins |
| CON4-17 CON5-17)) |
| (net N51109 |
| (pins |
| U4-1 R1-1)) |
| (net N51243 |
| (pins |
| U4-3 R2-1)) |
| (net N51332 |
| (pins |
| U4-5 R3-1)) |
| (net N55592 |
| (pins |
| R4-2 J1-3)) |
| (net N36937 |
| (pins |
| CON4-20 J13-1)) |
| (net N37144 |
| (pins |
| CON5-21 J12-2)) |
| (net N53250 |
| (pins |
| U3-7 R5-2)) |
| (net N53070 |
| (pins |
| U3-5 R7-2)) |
| (net N37348 |
| (pins |
| CON4-23 J8-1)) |
| (net N37007 |
| (pins |
| CON5-20 J13-2)) |
| (net N37211 |
| (pins |
| CON4-22 J11-1)) |
| (net N36870 |
| (pins |
| CON5-19 J14-2)) |
| (net N37074 |
| (pins |
| CON4-21 J12-1)) |
| (net N37418 |
| (pins |
| CON5-23 J8-2)) |
| (net N37281 |
| (pins |
| CON5-22 J11-2)) |
| (net N36800 |
| (pins |
| CON4-19 J14-1)) |
| (net N40223 |
| (pins |
| U1-10 J14-3)) |
| (net N40337 |
| (pins |
| U1-11 J13-3)) |
| (net N40406 |
| (pins |
| U1-12 J12-3)) |
| (net N50188 |
| (pins |
| U3-3 R8-2)) |
| (net N50032 |
| (pins |
| U3-1 R9-2)) |
| (net N50008 |
| (pins |
| J8-3 R9-1)) |
| (net N37522 |
| (pins |
| CON5-10 R1-2)) |
| (net N37627 |
| (pins |
| CON5-11 R2-2)) |
| (net N37732 |
| (pins |
| CON5-12 R3-2)) |
| (net N50158 |
| (pins |
| R8-1 J11-3)) |
| (net N40597 |
| (pins |
| CON2-9 J1-5)) |
| (net N38198 |
| (pins |
| CON5-15 R7-1)) |
| (net N38097 |
| (pins |
| CON5-13 R5-1)) |
| (net N14688 |
| (pins |
| CON4-7 U2-3)) |
| (net N54463 |
| (pins |
| U4-7 R4-1)) |
| (net N42209 |
| (pins |
| U2-15 CON5-8)) |
| (net N42326 |
| (pins |
| U2-14 CON5-7)) |
| (net N41046 |
| (pins |
| U2-16 CON5-9)) |
| (net N42437 |
| (pins |
| U2-13 CON5-6)) |
| (net N42556 |
| (pins |
| U2-12 CON5-5)) |
| (net N42675 |
| (pins |
| U2-11 CON5-4))) |
| ) |
| /schemata/Motory/AC_3F/ULN2003.asc |
|---|
| 0,0 → 1,173 |
| *PADS-PCB* |
| *PART* |
| CON2 DB9F@CANNON9F_90 |
| CON4 DB25M@CANNON25M_90 |
| CON5 DB25F@CANNON25F_90 |
| J1 JUMP5@JUMP5 |
| J11 JUMP3@JUMP3 |
| J12 JUMP3@JUMP3 |
| J13 JUMP3@JUMP3 |
| J14 JUMP3@JUMP3 |
| J2 JUMP1@JUMP1 |
| J3 JUMP1@JUMP1 |
| J4 JUMP1@JUMP1 |
| J5 JUMP1@JUMP1 |
| J8 JUMP3@JUMP3 |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 CROSS@CROSS |
| R1 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| R5 R@RL090 |
| R7 R@RL090 |
| R8 R@RL090 |
| R9 R@RL090 |
| U1 DIP16@DIP16_300 |
| U2 DIP16@DIP16_300 |
| U3 DIP16@DIP16_300 |
| U4 DIP16@DIP16_300 |
| *NET* |
| *SIGNAL* N42794 |
| U2.10 CON5.3 |
| *SIGNAL* N43077 |
| U1.16 CON5.2 |
| *SIGNAL* N43185 |
| U1.15 CON5.1 |
| *SIGNAL* N43293 |
| U1.14 CON5.14 |
| *SIGNAL* N43401 |
| U1.13 CON5.16 |
| *SIGNAL* VCC |
| U1.9 CON5.24 J4.1 U2.9 |
| *SIGNAL* +5V |
| U3.16 U3.14 U3.12 U3.10 U4.10 U4.14 U4.16 U4.12 |
| J2.1 |
| *SIGNAL* N18998 |
| J1.1 CON2.1 U3.15 |
| *SIGNAL* N19048 |
| CON2.2 U3.13 J1.2 |
| *SIGNAL* N19163 |
| CON2.6 U4.9 |
| *SIGNAL* N19217 |
| J1.4 CON2.8 |
| *SIGNAL* N19393 |
| U1.5 CON2.3 |
| *SIGNAL* N19443 |
| CON2.4 U1.6 |
| *SIGNAL* N19493 |
| CON2.7 U1.7 |
| *SIGNAL* N13359 |
| CON4.10 U4.15 |
| *SIGNAL* N13445 |
| CON4.11 U4.13 |
| *SIGNAL* N13531 |
| CON4.12 U4.11 |
| *SIGNAL* N13617 |
| CON4.13 U3.9 |
| *SIGNAL* N13703 |
| CON4.15 U3.11 |
| *SIGNAL* N14585 |
| CON4.8 U2.2 |
| *SIGNAL* N14796 |
| U2.4 CON4.6 |
| *SIGNAL* N14493 |
| CON4.9 U2.1 |
| *SIGNAL* N14903 |
| CON4.5 U2.5 |
| *SIGNAL* N15006 |
| CON4.4 U2.6 |
| *SIGNAL* N15322 |
| CON4.2 U1.1 |
| *SIGNAL* GND |
| CON4.24 CON4.25 U2.8 U1.8 CON4.18 CON5.25 CON5.18 U3.2 |
| U3.4 U3.6 U3.8 U4.2 U4.4 U4.6 U4.8 CON2.5 |
| J3.1 J5.1 |
| *SIGNAL* N15219 |
| CON4.3 U2.7 |
| *SIGNAL* N25409 |
| CON4.1 U1.2 |
| *SIGNAL* N13996 |
| CON4.14 U1.3 |
| *SIGNAL* N25451 |
| U1.4 CON4.16 |
| *SIGNAL* N25474 |
| CON4.17 CON5.17 |
| *SIGNAL* N51109 |
| U4.1 R1.1 |
| *SIGNAL* N51243 |
| U4.3 R2.1 |
| *SIGNAL* N51332 |
| U4.5 R3.1 |
| *SIGNAL* N55592 |
| R4.2 J1.3 |
| *SIGNAL* N36937 |
| CON4.20 J13.1 |
| *SIGNAL* N37144 |
| CON5.21 J12.2 |
| *SIGNAL* N53250 |
| U3.7 R5.2 |
| *SIGNAL* N53070 |
| U3.5 R7.2 |
| *SIGNAL* N37348 |
| CON4.23 J8.1 |
| *SIGNAL* N37007 |
| CON5.20 J13.2 |
| *SIGNAL* N37211 |
| CON4.22 J11.1 |
| *SIGNAL* N36870 |
| CON5.19 J14.2 |
| *SIGNAL* N37074 |
| CON4.21 J12.1 |
| *SIGNAL* N37418 |
| CON5.23 J8.2 |
| *SIGNAL* N37281 |
| CON5.22 J11.2 |
| *SIGNAL* N36800 |
| CON4.19 J14.1 |
| *SIGNAL* N40223 |
| U1.10 J14.3 |
| *SIGNAL* N40337 |
| U1.11 J13.3 |
| *SIGNAL* N40406 |
| U1.12 J12.3 |
| *SIGNAL* N50188 |
| U3.3 R8.2 |
| *SIGNAL* N50032 |
| U3.1 R9.2 |
| *SIGNAL* N50008 |
| J8.3 R9.1 |
| *SIGNAL* N37522 |
| CON5.10 R1.2 |
| *SIGNAL* N37627 |
| CON5.11 R2.2 |
| *SIGNAL* N37732 |
| CON5.12 R3.2 |
| *SIGNAL* N50158 |
| R8.1 J11.3 |
| *SIGNAL* N40597 |
| CON2.9 J1.5 |
| *SIGNAL* N38198 |
| CON5.15 R7.1 |
| *SIGNAL* N38097 |
| CON5.13 R5.1 |
| *SIGNAL* N14688 |
| CON4.7 U2.3 |
| *SIGNAL* N54463 |
| U4.7 R4.1 |
| *SIGNAL* N42209 |
| U2.15 CON5.8 |
| *SIGNAL* N42326 |
| U2.14 CON5.7 |
| *SIGNAL* N41046 |
| U2.16 CON5.9 |
| *SIGNAL* N42437 |
| U2.13 CON5.6 |
| *SIGNAL* N42556 |
| U2.12 CON5.5 |
| *SIGNAL* N42675 |
| U2.11 CON5.4 |
| *END* |
| /schemata/Motory/AC_3F/ULN2003.eco |
|---|
| 0,0 → 1,11 |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Fri Mar 07 17:19:28 2003 |
| *PART* |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 CROSS@CROSS |
| *END* |
| /schemata/Motory/AC_3F/ULN2003.net |
|---|
| 0,0 → 1,102 |
| *PADS-PCB* |
| *PART* |
| CON1 DB25F,DB25F@CANNON25F_90 |
| CON2 DB9F,DB9F@CANNON9F_90 |
| J1 JUMP5,vstup@JUMP5 |
| J10 JUMP2X7,JUMP2X7@JUMP2X7 |
| J2 JUMP4,vstupvystup@JUMP4 |
| J3 JUMP8,vystup@JUMP8 |
| J4 ,PHONEJACKSTEREO@JACK35 |
| J5 JUMP5,vstup_com@JUMP5 |
| J6 JUMP3,vystup_com@JUMP3 |
| J9 JUMP2X7,JUMP2X7@JUMP2X7 |
| U1 DIP16,ULN2003@DIP16_300 |
| U2 DIP16,ULN2003@DIP16_300 |
| *NET* |
| *SIGNAL* N18998 |
| J5.1 CON2.1 |
| *SIGNAL* N19048 |
| J5.2 CON2.2 |
| *SIGNAL* N19163 |
| J5.3 CON2.6 |
| *SIGNAL* N19271 |
| J5.5 CON2.9 |
| *SIGNAL* N19217 |
| J5.4 CON2.8 |
| *SIGNAL* N19393 |
| CON2.3 U1.5 J6.1 |
| *SIGNAL* N19443 |
| CON2.4 U1.6 J6.2 |
| *SIGNAL* N19493 |
| CON2.7 U1.7 J6.3 |
| *SIGNAL* N21675 |
| J9.9 U2.12 |
| *SIGNAL* N21413 |
| J9.3 U2.15 |
| *SIGNAL* N21587 |
| J9.7 U2.13 |
| *SIGNAL* N13359 |
| J1.5 CON1.10 |
| *SIGNAL* N21499 |
| J9.5 U2.14 |
| *SIGNAL* N13445 |
| J1.4 CON1.11 |
| *SIGNAL* N21331 |
| J9.1 U2.16 |
| *SIGNAL* N13531 |
| J1.3 CON1.12 |
| *SIGNAL* N13617 |
| J1.2 CON1.13 |
| *SIGNAL* N13703 |
| CON1.15 J1.1 |
| *SIGNAL* N14585 |
| CON1.8 U2.2 J3.2 |
| *SIGNAL* N14796 |
| CON1.6 U2.4 J3.4 |
| *SIGNAL* N14493 |
| CON1.9 U2.1 J3.1 |
| *SIGNAL* N14903 |
| CON1.5 U2.5 J3.5 |
| *SIGNAL* N15006 |
| CON1.4 U2.6 J3.6 |
| *SIGNAL* N15322 |
| CON1.2 U1.1 J3.8 |
| *SIGNAL* GND |
| CON1.21 CON1.22 CON1.25 CON1.18 CON1.23 CON1.19 CON1.20 U1.8 |
| CON1.24 U2.8 CON2.5 J4.1 |
| *SIGNAL* N15219 |
| CON1.3 U2.7 J3.7 |
| *SIGNAL* N22653 |
| J10.5 U1.14 |
| *SIGNAL* N22313 |
| J9.11 U2.11 |
| *SIGNAL* N22399 |
| J9.13 U2.10 |
| *SIGNAL* N22485 |
| J10.1 U1.16 |
| *SIGNAL* N22999 |
| J10.13 U1.10 |
| *SIGNAL* N22913 |
| J10.11 U1.11 |
| *SIGNAL* N22827 |
| J10.9 U1.12 |
| *SIGNAL* N22567 |
| J10.3 U1.15 |
| *SIGNAL* N22739 |
| J10.7 U1.13 |
| *SIGNAL* N25409 |
| CON1.1 U1.2 J2.1 |
| *SIGNAL* N13996 |
| J2.2 CON1.14 U1.3 |
| *SIGNAL* N25451 |
| CON1.16 U1.4 J2.3 |
| *SIGNAL* N25474 |
| CON1.17 J2.4 |
| *SIGNAL* N14688 |
| CON1.7 U2.3 J3.3 |
| *SIGNAL* +V |
| U1.9 U2.9 J9.2 J9.4 J9.6 J9.8 J9.10 J9.12 |
| J9.14 J10.2 J10.4 J10.6 J10.8 J10.10 J10.12 J10.14 |
| J4.3 J4.2 |
| *END* |
| /schemata/Motory/AC_3F/ULN2003.opj |
|---|
| 0,0 → 1,168 |
| (ExpressProject "ULN2003" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\uln2003.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "ULN2003.asc") |
| (OTHER_Netlist_File2 "ULN2003.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EDIF_Netlist_File "ULN2003.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "TRUE") |
| (DRC_Check_Off-Page_Connectors "TRUE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "TRUE") |
| (DRC_Report_Off-grid_Objects "TRUE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "TRUE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DRC") |
| (RootChangedForceReNetlist "x")) |
| (Folder "Outputs" |
| (File ".\uln2003.net" |
| (Type "Report")) |
| (File ".\uln2003.asc" |
| (Type "Report")) |
| (File ".\uln2003.edn" |
| (Type "Report")) |
| (File ".\uln2003.drc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (DB15F |
| (FullPartName "DB15F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PADRC_5x6 |
| (FullPartName "PADRC_5x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (JUMP5 |
| (FullPartName "JUMP5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PRIM20 |
| (FullPartName "PRIM20.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (PADRC_2x6 |
| (FullPartName "PADRC_2x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (PRIM10 |
| (FullPartName "PRIM10.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB15M |
| (FullPartName "DB15M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (RS232JUMP2X5 |
| (FullPartName "RS232JUMP2X5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (PHONEJACKSTEREO |
| (FullPartName "PHONEJACKSTEREO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\_SENO_.OLB") |
| (DeviceIndex "0")) |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP2X7 |
| (FullPartName "JUMP2X7.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP4 |
| (FullPartName "JUMP4.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DIP16_300 |
| (FullPartName "DIP16_300.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\DECALES.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC1") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC2") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x")) |
| /schemata/Motory/AC_3F/ULN2003.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/layout.log |
|---|
| 0,0 → 1,1498 |
| Wed Mar 20 22:49:21 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:50:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:51:31 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:46 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:47 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:19 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:43 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:44 Windows which were open at time of error: |
| Wed Mar 20 22:53:44 End-of-list |
| Wed Mar 20 22:53:54 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:55 Windows which were open at time of error: |
| Wed Mar 20 22:53:55 ActiveWindow: &Components |
| Wed Mar 20 22:53:55 Icon: &Nets |
| Wed Mar 20 22:53:55 Icon: Post Proces&s |
| Wed Mar 20 22:53:55 Icon: &Route |
| Wed Mar 20 22:53:55 End-of-list |
| Wed Mar 20 22:54:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:27 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:54:27 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:21 Windows which were open at time of error: |
| Wed Mar 20 22:56:21 End-of-list |
| Wed Mar 20 22:57:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:30 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:57:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:10 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:01:10 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:05:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:12:26 No new connections routed. |
| Wed Mar 20 23:12:26 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:12:27 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:13:48 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:29 No new connections routed. |
| Wed Mar 20 23:15:29 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:15:30 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:18:33 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:22:11 No new connections routed. |
| Wed Mar 20 23:22:11 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:43 No new connections routed. |
| Wed Mar 20 23:24:43 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:44 Routed 18 connections in 0 seconds. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:44:52 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:48:34 Routed 2 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 2 out of 29 (6%). |
| Wed Mar 20 23:48:34 Routed 27 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:50:26 Saved as file ~undo.max |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 UserDiv from Layout.INI for AutoECO: 60 |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:07:07 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:15:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:56 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:08 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:16:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:48 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:55 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:19:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:06 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:16:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:10 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:20:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:05 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:35:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:36:27 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:36:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:28 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:30 Windows which were open at time of error: |
| Sat Mar 23 06:26:30 ActiveWindow: &Components |
| Sat Mar 23 06:26:30 Icon: &Nets |
| Sat Mar 23 06:26:30 Icon: Post Proces&s |
| Sat Mar 23 06:26:30 Icon: &Route |
| Sat Mar 23 06:26:30 End-of-list |
| Sat Mar 23 06:34:32 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:52 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:42:32 No new connections routed. |
| Sat Mar 23 06:42:32 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:42:34 Routed 28 connections in 2 seconds. |
| Sat Mar 23 06:42:34 Total is now 28 out of 29 (96%). |
| Sat Mar 23 06:42:36 Routed 1 connections in 1 seconds. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:43:55 No new connections routed. |
| Sat Mar 23 06:43:55 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:44:00 Routed 28 connections in 5 seconds. |
| Sat Mar 23 06:44:00 Total is now 27 out of 29 (93%). |
| Sat Mar 23 06:44:02 Routed 2 connections in 1 seconds. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:45:00 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:54:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| /schemata/Motory/AC_3F/motor board.opj |
|---|
| 0,0 → 1,159 |
| (ExpressProject "motor board" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\motor board.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "0") |
| (EDIF_Netlist_File "MOTOR BOARD.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\NOVÁ SLOKA\MOTOR BOARD.DRC") |
| (LAYOUT_Netlist_File "MOTOR BOARD.MNL") |
| (LAYOUT_PCB_Footprint "{PCB Footprint}") |
| (FALSE) |
| (LAYOUT_Units "1") |
| (TRUE) |
| (FALSE) |
| (RootChangedForceReNetlist "x") |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "MOTOR BOARD.NET") |
| (OTHER_Netlist_File2 "MOTOR BOARD.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "accel.dll") |
| (OTHER_PCB_Footprint "{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EXPORT_Scope "0") |
| (EXPORT_Contents "-1") |
| (EXPORT_File_Name "D:\@KAKLIK\MOTOR\MOTOR BOARD.EXP")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library") |
| (PartMRUSelector |
| (JUMPER16 |
| (FullPartName "JUMPER16.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER5 |
| (FullPartName "JUMPER5.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER4 |
| (FullPartName "JUMPER4.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (JUMPER11 |
| (FullPartName "JUMPER11.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (7404 |
| (FullPartName "7404.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (0 |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\PSPICE\SOURCE.OLB") |
| (DeviceIndex "0")) |
| (CON1 |
| (FullPartName "CON1.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (2N1069 |
| (FullPartName "2N1069.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (2N2903 |
| (FullPartName "2N2903.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7406 |
| (FullPartName "7406.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (2N1132A |
| (FullPartName "2N1132A.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7403 |
| (FullPartName "7403.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (JUMPER10 |
| (FullPartName "JUMPER10.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR AC" |
| (FullPartName "MOTOR AC.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR STEPPER" |
| (FullPartName "MOTOR STEPPER.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| (TC4077B |
| (FullPartName "TC4077B.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/Motory/AC_3F/readme.txt |
|---|
| 0,0 → 1,0 |
| vsechny soucastky jsou ze strany spoju |
| /schemata/Motory/AC_3F/verze2/!readme!.txt |
|---|
| 0,0 → 1,0 |
| vsechny soucastky jsou ze strany spoju |
| /schemata/Motory/AC_3F/verze2/KAKLIK/SPINACE03_u.eco |
|---|
| 0,0 → 1,12 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE03_u.pcb -- Mon Mar 10 13:09:02 2003 |
| *DELPIN* |
| CON4.25 GND |
| *NET* |
| *SIGNAL* +12V 30 |
| CON4.25 CON4.1 |
| *END* |
| /schemata/Motory/AC_3F/verze2/KAKLIK/SPINACE03_u.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/KAKLIK/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/SPINACE.BOM |
|---|
| 0,0 → 1,28 |
| ROBOT DRIVER Revised: Sunday, March 09, 2003 |
| 000 Revision: 1 |
| Bill Of Materials March 9,2003 10:25:18 Page1 |
| Item Quantity Reference Part |
| ______________________________________________ |
| 1 1 CON1 DB25M |
| 2 1 CON3 DB9F |
| 3 1 CON4 DB25F |
| 4 1 C1 10 uF |
| 5 1 D1 D |
| 6 2 J1,J2 JUMP1 |
| 7 1 J3 JUMP2 |
| 8 3 M1,M2,M3 CROSS |
| 9 4 M4,M5,M6,M7 HOLE_M3 |
| 10 1 M8 Kabel |
| 11 6 R1,R2,R3,R11,R12,R13 R |
| 12 2 R4,R14 1k5 |
| 13 2 U1,U2 KP_1040 |
| 14 2 U6,U7 ULN2003 |
| /schemata/Motory/AC_3F/verze2/SPINACE.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/SPINACE.DRC |
|---|
| 0,0 → 1,23 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| WARNING: [DRC0007] Net has no driving source BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections STROBE |
| SCHEMATIC1, PAGE1 (48.26, 22.86) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N04316 |
| SCHEMATIC1, PAGE1 (68.58, 15.24) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N08219 |
| SCHEMATIC1, PAGE1 (68.58, 71.12) |
| Checking for Invalid References |
| Checking for Duplicate References |
| /schemata/Motory/AC_3F/verze2/SPINACE.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/SPINACE.ONL |
|---|
| 0,0 → 1,854 |
| (PCB SPINACE |
| (description |
| (timeStamp "2003 03 09 09 34 16") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "ROBOT DRIVER") |
| (date "Sunday, March 09, 2003") |
| (document "000") |
| (revision "1") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component D |
| (place D1 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 00005091) |
| ("Source Package" D) |
| (Value D)))) |
| (component JUMP1 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000551B) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000552D) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component DB25F |
| (place CON4 |
| (property |
| ("PCB Footprint" CANNON25F_90) |
| (Device DB25F) |
| (timestamp 000042C0) |
| ("Source Package" DB25F) |
| (Value DB25F)))) |
| (component JUMP2 |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP2) |
| (Device JUMP2) |
| (timestamp 0000553F) |
| ("Source Package" JUMP2) |
| (Value JUMP2)))) |
| (component DB25M |
| (place CON1 |
| (property |
| ("PCB Footprint" CANNON25M_90) |
| (Device DB25M) |
| (timestamp 00005BBA) |
| ("Source Package" DB25M) |
| (Value DB25M)))) |
| (component ULN2003 |
| (place U6 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 000002C9) |
| ("Source Package" ULN2003) |
| (Value ULN2003))) |
| (place U7 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000317) |
| ("Source Package" ULN2003) |
| (Value ULN2003)))) |
| (component KP_1040 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000003) |
| ("Source Package" KP_1040) |
| (Value KP_1040))) |
| (place U2 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000051) |
| ("Source Package" KP_1040) |
| (Value KP_1040)))) |
| (component DB9F |
| (place CON3 |
| (property |
| ("PCB Footprint" CANNON9F_90) |
| (Device DB9F) |
| (timestamp 0000350D) |
| ("Source Package" DB9F) |
| (Value DB9F)))) |
| (component HOLE_M3 |
| (place M4 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CC4) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M5 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CD6) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M6 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CE8) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M7 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CFA) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3)))) |
| (component CROSS |
| (place M1 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 000014D3) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M2 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C4C) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M3 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C60) |
| ("Source Package" CROSS) |
| (Value CROSS)))) |
| (component "C-ELYT" |
| (place C1 |
| (property |
| ("PCB Footprint" CE050X13) |
| (Device ELYT) |
| (timestamp 00006890) |
| ("Source Package" "C-ELYT") |
| (Value "10 uF")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000635) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000067B) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000691) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000006A7) |
| ("Source Package" R) |
| (Value 1k5))) |
| (place R11 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000828) |
| ("Source Package" R) |
| (Value R))) |
| (place R12 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000088C) |
| ("Source Package" R) |
| (Value R))) |
| (place R13 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000086A) |
| ("Source Package" R) |
| (Value R))) |
| (place R14 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000008A2) |
| ("Source Package" R) |
| (Value 1k5))))) |
| (library |
| (image DB25M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DB9F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB9F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4)))) |
| (image DB25F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image KP_1040 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname A1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname K1) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname A2) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname K2) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname A3) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname K3) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname A4) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname K4) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname e4) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname c4) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname e3) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname c3) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname e2) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname c2) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname e1) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname c1) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ULN2003 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname I1) |
| (pintype 0))) |
| (pin 999 2 |
| (property |
| (pinname I2) |
| (pintype 0))) |
| (pin 999 3 |
| (property |
| (pinname I3) |
| (pintype 0))) |
| (pin 999 4 |
| (property |
| (pinname I4) |
| (pintype 0))) |
| (pin 999 5 |
| (property |
| (pinname I5) |
| (pintype 0))) |
| (pin 999 6 |
| (property |
| (pinname I6) |
| (pintype 0))) |
| (pin 999 7 |
| (property |
| (pinname I7) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname GND) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname K) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname O7) |
| (pintype 2))) |
| (pin 999 11 |
| (property |
| (pinname O6) |
| (pintype 2))) |
| (pin 999 12 |
| (property |
| (pinname O5) |
| (pintype 2))) |
| (pin 999 13 |
| (property |
| (pinname O4) |
| (pintype 2))) |
| (pin 999 14 |
| (property |
| (pinname O3) |
| (pintype 2))) |
| (pin 999 15 |
| (property |
| (pinname O2) |
| (pintype 2))) |
| (pin 999 16 |
| (property |
| (pinname O1) |
| (pintype 2)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device C)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CROSS |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SYMBOLS.OLB) |
| (Device CROSS))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4)))) |
| (image HOLE_M3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device PAD)) |
| (pin 999 1 |
| (property |
| (pinname PIN) |
| (pintype 4)))) |
| (image JUMP2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image D |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))))) |
| (network |
| (net RTS |
| (pins |
| CON3-7 U7-6)) |
| (net DTR |
| (pins |
| CON3-4 U7-7)) |
| (net RI |
| (pins |
| CON3-9 U2-15)) |
| (net CTS |
| (pins |
| CON3-8 U2-13)) |
| (net DSR |
| (pins |
| CON3-6 U2-11)) |
| (net D4 |
| (pins |
| U7-2 CON1-6)) |
| (net D6 |
| (pins |
| CON1-8 U7-4)) |
| (net D7 |
| (pins |
| CON1-9 U7-5)) |
| (net D5 |
| (pins |
| U7-3 CON1-7)) |
| (net N21518 |
| (pins |
| U2-10 U2-12 U2-14 U2-16 D1-C C1-A)) |
| (net BA2_1 |
| (pins |
| CON1-14 U6-2)) |
| (net BA2_2 |
| (pins |
| U6-5 CON1-16)) |
| (net BA2_3 |
| (pins |
| CON1-17 U6-7)) |
| (net BA1_6 |
| (pins |
| CON1-10 U1-10)) |
| (net BA1_7 |
| (pins |
| CON1-11 U1-12)) |
| (net BA1_5 |
| (pins |
| U1-14 CON1-12)) |
| (net BA1_4 |
| (pins |
| U1-16 CON1-13)) |
| (net O2_0 |
| (pins |
| U6-16 CON4-14)) |
| (net O2_1 |
| (pins |
| U6-15 CON4-2)) |
| (net O2_2 |
| (pins |
| U6-12 CON4-16)) |
| (net O2_3 |
| (pins |
| U6-10 CON4-17)) |
| (net O0_0 |
| (pins |
| U6-14 CON4-15)) |
| (net O0_1 |
| (pins |
| U6-13 CON4-3)) |
| (net O0_2 |
| (pins |
| U6-11 CON4-4)) |
| (net O0_3 |
| (pins |
| U7-16 CON4-5)) |
| (net O0_4 |
| (pins |
| U7-15 CON4-18)) |
| (net O0_5 |
| (pins |
| U7-14 CON4-6)) |
| (net O0_6 |
| (pins |
| U7-13 CON4-19)) |
| (net O0_7 |
| (pins |
| U7-12 CON4-7)) |
| (net O_RTS |
| (pins |
| U7-11 CON4-20)) |
| (net O_DTR |
| (pins |
| U7-10 CON4-8)) |
| (net I1_4 |
| (pins |
| R4-2 CON4-10)) |
| (net I1_5 |
| (pins |
| R3-2 CON4-22)) |
| (net I1_6 |
| (pins |
| R1-2 CON4-21)) |
| (net I1_7 |
| (pins |
| R2-2 CON4-9)) |
| (net I1_3 |
| (pins |
| R11-2 CON4-23)) |
| (net I_DSR |
| (pins |
| R12-2 CON4-11)) |
| (net I_CTS |
| (pins |
| R13-2 CON4-24)) |
| (net I_RI |
| (pins |
| R14-2 CON4-12)) |
| (net BA1_3 |
| (pins |
| CON1-15 U2-9)) |
| (net TXD |
| (pins |
| D1-A CON3-3)) |
| (net N01853 |
| (pins |
| U1-7 R1-1)) |
| (net N01906 |
| (pins |
| U1-5 R2-1)) |
| (net N01959 |
| (pins |
| U1-3 R3-1)) |
| (net N02012 |
| (pins |
| U1-1 R4-1)) |
| (net N02164 |
| (pins |
| U2-7 R11-1)) |
| (net N02168 |
| (pins |
| U2-3 R13-1)) |
| (net N02134 |
| (pins |
| U2-5 R12-1)) |
| (net N02160 |
| (pins |
| U2-1 R14-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| U1-8 U2-2 U1-15 U6-8 U1-13 U2-6 U1-2 U1-9 U7-8 |
| U2-4 U1-6 U1-4 U1-11 U2-8 CON3-5 CON4-25 CON4-13 C1-C |
| J2-1 CON1-18 CON1-19 CON1-20 CON1-21 CON1-22 CON1-23 CON1-24 CON1-25)) |
| (net STROBE |
| (pins |
| U6-1 CON1-1)) |
| (net D0 |
| (pins |
| CON1-2 U6-3)) |
| (net D1 |
| (pins |
| U6-4 CON1-3)) |
| (net DCD |
| (pins |
| J3-1 CON3-1)) |
| (net D2 |
| (pins |
| CON1-4 U6-6)) |
| (net RXD |
| (pins |
| J3-2 CON3-2)) |
| (net D3 |
| (pins |
| CON1-5 U7-1)) |
| (net +12V |
| (property |
| (nettype S)) |
| (pins |
| U6-9 U7-9 CON4-1 J1-1))) |
| ) |
| /schemata/Motory/AC_3F/verze2/SPINACE.asc |
|---|
| 0,0 → 1,151 |
| *PADS-PCB* |
| *PART* |
| C1 ELYT@CE050X13 |
| CON1 DB25M@CANNON25M_90 |
| CON3 DB9F@CANNON9F_90 |
| CON4 DB25F@CANNON25F_90 |
| D1 D@DO41 |
| J1 JUMP1@JUMP1 |
| J2 JUMP1@JUMP1 |
| J3 JUMP2@JUMP2 |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 HOLE@HOLE_M3 |
| M5 HOLE@HOLE_M3 |
| M6 HOLE@HOLE_M3 |
| M7 HOLE@HOLE_M3 |
| R1 R@RL090 |
| R11 R@RL090 |
| R12 R@RL090 |
| R13 R@RL090 |
| R14 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| U1 DIP16@DIP16_300 |
| U2 DIP16@DIP16_300 |
| U6 DIP16@DIP16_300 |
| U7 DIP16@DIP16_300 |
| *NET* |
| *SIGNAL* RTS |
| CON3.7 U7.6 |
| *SIGNAL* DTR |
| CON3.4 U7.7 |
| *SIGNAL* RI |
| CON3.9 U2.15 |
| *SIGNAL* CTS |
| CON3.8 U2.13 |
| *SIGNAL* DSR |
| CON3.6 U2.11 |
| *SIGNAL* D4 |
| U7.2 CON1.6 |
| *SIGNAL* D6 |
| CON1.8 U7.4 |
| *SIGNAL* D7 |
| CON1.9 U7.5 |
| *SIGNAL* D5 |
| U7.3 CON1.7 |
| *SIGNAL* N21518 |
| U2.10 U2.12 U2.14 U2.16 D1.C C1.A |
| *SIGNAL* BA2_1 |
| CON1.14 U6.2 |
| *SIGNAL* BA2_2 |
| U6.5 CON1.16 |
| *SIGNAL* BA2_3 |
| CON1.17 U6.7 |
| *SIGNAL* BA1_6 |
| CON1.10 U1.10 |
| *SIGNAL* BA1_7 |
| CON1.11 U1.12 |
| *SIGNAL* BA1_5 |
| U1.14 CON1.12 |
| *SIGNAL* BA1_4 |
| U1.16 CON1.13 |
| *SIGNAL* O2_0 |
| U6.16 CON4.14 |
| *SIGNAL* O2_1 |
| U6.15 CON4.2 |
| *SIGNAL* O2_2 |
| U6.12 CON4.16 |
| *SIGNAL* O2_3 |
| U6.10 CON4.17 |
| *SIGNAL* O0_0 |
| U6.14 CON4.15 |
| *SIGNAL* O0_1 |
| U6.13 CON4.3 |
| *SIGNAL* O0_2 |
| U6.11 CON4.4 |
| *SIGNAL* O0_3 |
| U7.16 CON4.5 |
| *SIGNAL* O0_4 |
| U7.15 CON4.18 |
| *SIGNAL* O0_5 |
| U7.14 CON4.6 |
| *SIGNAL* O0_6 |
| U7.13 CON4.19 |
| *SIGNAL* O0_7 |
| U7.12 CON4.7 |
| *SIGNAL* O_RTS |
| U7.11 CON4.20 |
| *SIGNAL* O_DTR |
| U7.10 CON4.8 |
| *SIGNAL* I1_4 |
| R4.2 CON4.10 |
| *SIGNAL* I1_5 |
| R3.2 CON4.22 |
| *SIGNAL* I1_6 |
| R1.2 CON4.21 |
| *SIGNAL* I1_7 |
| R2.2 CON4.9 |
| *SIGNAL* I1_3 |
| R11.2 CON4.23 |
| *SIGNAL* I_DSR |
| R12.2 CON4.11 |
| *SIGNAL* I_CTS |
| R13.2 CON4.24 |
| *SIGNAL* I_RI |
| R14.2 CON4.12 |
| *SIGNAL* BA1_3 |
| CON1.15 U2.9 |
| *SIGNAL* TXD |
| D1.A CON3.3 |
| *SIGNAL* N01853 |
| U1.7 R1.1 |
| *SIGNAL* N01906 |
| U1.5 R2.1 |
| *SIGNAL* N01959 |
| U1.3 R3.1 |
| *SIGNAL* N02012 |
| U1.1 R4.1 |
| *SIGNAL* N02164 |
| U2.7 R11.1 |
| *SIGNAL* N02168 |
| U2.3 R13.1 |
| *SIGNAL* N02134 |
| U2.5 R12.1 |
| *SIGNAL* N02160 |
| U2.1 R14.1 |
| *SIGNAL* GND |
| U1.8 U2.2 U1.15 U6.8 U1.13 U2.6 U1.2 U1.9 |
| U7.8 U2.4 U1.6 U1.4 U1.11 U2.8 CON3.5 CON4.25 |
| CON4.13 C1.C J2.1 CON1.18 CON1.19 CON1.20 CON1.21 CON1.22 |
| CON1.23 CON1.24 CON1.25 |
| *SIGNAL* STROBE |
| U6.1 CON1.1 |
| *SIGNAL* D0 |
| CON1.2 U6.3 |
| *SIGNAL* D1 |
| U6.4 CON1.3 |
| *SIGNAL* DCD |
| J3.1 CON3.1 |
| *SIGNAL* D2 |
| CON1.4 U6.6 |
| *SIGNAL* RXD |
| J3.2 CON3.2 |
| *SIGNAL* D3 |
| CON1.5 U7.1 |
| *SIGNAL* +12V |
| U6.9 U7.9 CON4.1 J1.1 |
| *END* |
| /schemata/Motory/AC_3F/verze2/SPINACE.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/SPINACE01.eco |
|---|
| 0,0 → 1,15 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:18:27 2003 |
| *CHGPART* |
| CON4 DB25F@CANNON25F_90 DB25F@CANNON25F |
| CON1 DB25M@CANNON25M_90 DB25M@CANNON25M |
| CON3 DB9F@CANNON9F_90 DB9F@CANNON9F |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:38:47 2003 |
| *END* |
| /schemata/Motory/AC_3F/verze2/SPINACE01.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/SPINACE02.asc |
|---|
| 0,0 → 1,9604 |
| !PADS-POWERPCB-V5.0-BASIC! DESIGN DATABASE ASCII FILE 1.0 |
| *PCB* GENERAL PARAMETERS OF THE PCB DESIGN |
| UNITS 0 2=Inches 1=Metric 0=Mils |
| USERGRID 381000 381000 Space between USER grid points |
| MAXIMUMLAYER 2 Maximum routing layer |
| WORKLEVEL 1 Level items will be created on |
| DISPLAYLEVEL 1 toggle for displaying working level last |
| LAYERPAIR 1 2 Layer pair used to route connection |
| VIAMODE T Type of via to use when routing between layers |
| LINEWIDTH 381000 Width items will be created with |
| TEXTSIZE 3810000 381000 Height and LineWidth text will be created with |
| JOBTIME 154 Amount of time spent on this PCB design |
| DOTGRID 38100000 38100000 Space between graphic dots |
| SCALE 9.745 Scale of window expansion |
| ORIGIN 381000000 381000000 User defined origin location |
| WINDOWCENTER 480140111 491602242 Point defining the center of the window |
| BACKUPTIME 20 Number of minutes between database backups |
| REAL WIDTH 381000 Widths greater then this are displayed real size |
| ALLSIGONOFF 1 All signal nets displayed on/off |
| REFNAMESIZE 3810000 381000 Height and LineWidth used by part ref. names |
| HIGHLIGHT 0 Highlight nets flag |
| JOBNAME SPINACE02.pcb |
| CONCOL 1 |
| FBGCOL 1 0 |
| HATCHGRID 381000 Copper pour hatching grid |
| TEARDROP 2713690 Teardrop tracks |
| THERLINEWID 571500 Copper pour thermal line width |
| PSVIAGRID 381000 381000 Push & Shove Via Grid |
| PADFILLWID 381000 CAM finger pad fill width |
| THERSMDWID 381000 Copper pour thermal line width for SMD |
| MINHATAREA 0 Minimum hatch area |
| HATCHMODE 0 Hatch generation mode |
| HATCHDISP 0 Hatch display flag |
| DRILLHOLE 228600 Drill hole checking spacing |
| MITRERADII 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |
| MITRETYPE 1 Mitring type |
| HATCHRAD 1.000000 Hatch outline smoothing radius |
| MITREANG 180 180 180 180 180 180 90 |
| HATCHANG 0 Hatch angle |
| THERFLAGS 0 Copper pour thermal line flags |
| DRLOVERSIZE 114300 Drill oversize for plated holes |
| PLANERAD 0.000000 Plane outline smoothing radius |
| PLANEFLAGS OUTLINE THERMALS Y Y Y N N Y Y Y N N Y Y N Y Y N N Plane and Test Points flags |
| COMPHEIGHT 0 Board Top Component Height Restriction |
| KPTHATCHGRID 3810000 Copper pour hatching grid |
| BOTCMPHEIGHT 0 Board Bottom Component Height Restriction |
| FANOUTGRID 952500 952500 Fanout grid |
| FANOUTLENGTH 9525000 Maximum fanout length |
| ROUTERFLAGS 83879441 Autorouter specific flags |
| VERIFYFLAGS 1861 Verify Design flags |
| FABCHKFLAGS 3967 Fabrication checks flags |
| ATMAXSIZE 114300 Acid Traps Maximum Size |
| ATMAXANGLE 161999820 Acid Traps Maximum Angle |
| SLMINCOPPER 114300 Slivers Minimum Copper |
| SLMINMASK 114300 Slivers Minimum Mask |
| STMINCLEAR 5 Starved Thermal Minimum Clearance |
| STMINSPOKES 4 Starved Thermal Minimum Spokes |
| TPMINWIDTH 114300 Minimum Trace Width |
| TPMINSIZE 114300 Mimimum Pad Size |
| SSMINGAP 114300 Silk Screen Over Pads Minimum Gap |
| SBMINGAP 114300 Solder Bridges Minimum Gap |
| SBLAYER 1 Solder Bridges Layer |
| ARPTOM 114300 Pad To Mask Annular Ring |
| ARPTOMLAYER 1 Pad To Mask Annular Ring Layer |
| ARDTOM 114300 Drill To Mask Annular Ring |
| ARDTOMLAYER 1 Drill To Mask Annular Ring Layer |
| ARDTOP 114300 Drill To Pad Annular Ring |
| ARDTOPLAYER 0 Drill To Pad Annular Ring Layer |
| PLNSEPGAP 228600 Plane separation gap |
| IDFSHAPELAY 0 IDF shapes layer |
| TEARDROPDATA 90 90 |
| *REUSE* |
| *REMARK* TYPE TYPENAME |
| *REMARK* TIMESTAMP SECONDS |
| *REMARK* PART NAMING PARTNAMING |
| *REMARK* PART NAME |
| *REMARK* NET NAMING NETNAMING |
| *REMARK* NET MERGE NAME |
| *REMARK* REUSE INSTANCENM PARTNAMING NETNAMING X Y ORI GLUED |
| *TEXT* FREE TEXT |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST .REUSE. INSTANCENM |
| *LINES* LINES ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES TEXT SIGSTR |
| *REMARK* .REUSE. INSTANCE RSIGNAL |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| DRW83515280 BOARD 7620000 114300000 1 |
| CLOSED 5 381000 0 |
| 0 3048000 |
| 153924000 3048000 |
| 153924000 -106680000 |
| 0 -106680000 |
| 0 3048000 |
| DIM98152102 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 2048 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 2048 |
| -153924000 0 |
| -153923000 0 |
| ARWLN1 2 381000 24 2048 |
| 0 -15240000 |
| -69324682 -15240000 |
| ARWHD1 4 381000 24 2048 |
| 0 -15240000 |
| -3810000 -16192500 |
| -3810000 -14287500 |
| 0 -15240000 |
| ARWLN2 2 381000 24 2048 |
| -153924000 -15240000 |
| -84599318 -15240000 |
| ARWHD2 4 381000 24 2048 |
| -153924000 -15240000 |
| -150114000 -14287500 |
| -150114000 -16192500 |
| -153924000 -15240000 |
| EXTLN1 2 381000 24 2048 |
| 0 -1905000 |
| 0 -17145000 |
| EXTLN2 2 381000 24 2048 |
| -153924000 -1905000 |
| -153924000 -17145000 |
| -83456318 -16668750 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 102.6mm |
| DIM58176572 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 4096 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 4096 |
| 0 109728000 |
| 1000 109728000 |
| ARWLN1 2 381000 24 4096 |
| 20955000 0 |
| 20955000 52292250 |
| ARWHD1 4 381000 24 4096 |
| 20955000 0 |
| 20002500 3810000 |
| 21907500 3810000 |
| 20955000 0 |
| ARWLN2 2 381000 24 4096 |
| 20955000 109728000 |
| 20955000 57435750 |
| ARWHD2 4 381000 24 4096 |
| 20955000 109728000 |
| 21907500 105918000 |
| 20002500 105918000 |
| 20955000 109728000 |
| EXTLN1 2 381000 24 4096 |
| 1905000 0 |
| 22860000 0 |
| EXTLN2 2 381000 24 4096 |
| 1905000 109728000 |
| 22860000 109728000 |
| 15023523 53435250 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 73.2mm |
| *CLUSTER* ITEMS |
| *REMARK* NAME XLOC YLOC PARENTID CLUSTERID CHILD_NUM ATTRIBUTE ATT2 BROID |
| *VIA* ITEMS |
| *REMARK* NAME DRILL STACKLINES [DRILL START] [DRILL END] |
| *REMARK* LEVEL SIZE SHAPE [INNER DIAMETER] |
| JMPVIA_AAAAB 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| JMPVIA_AAAAA 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| STANDARDVIA 1409700 3 |
| -2 2095500 R |
| -1 2095500 R |
| 0 2095500 R |
| *JUMPER* |
| *REMARK* NAME FLAGS MINLEN MAXLEN LENINCR LABELS PADSTACKS |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| JMP1 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| JMP2 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| *PARTDECAL* ITEMS |
| *REMARK* NAME ORIX ORIY PIECES TERMINALS STACKS TEXT LABELS |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* PIECETYPE CORNERS WIDTH LEVEL PINNUM |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* T XLOC YLOC NMXLOC NMYLOC |
| *REMARK* PAD PIN STACKLINES |
| *REMARK* LEVEL SIZE SHAPE IDIA DRILL [PLATED] |
| *REMARK* LEVEL SIZE SHAPE FINORI FINLENGTH FINOFFSET DRILL [PLATED] |
| ELYTA I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1028700 1676400 |
| -3864408 1676400 |
| -4169208 1371600 |
| -4169208 -1371600 |
| -3864408 -1676400 |
| -1028700 -1676400 |
| OPEN 4 300000 0 |
| 1028700 1676400 |
| 4076700 1676400 |
| 4076700 -1676400 |
| 1028700 -1676400 |
| -5528803 -670722 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2118500 2430789 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -1990311 6609732 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2400300 0 -2512500 -600000 |
| T2400300 0 2107500 -585000 |
| PAD 0 5 |
| -2 2476500 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 2705100 S |
| 23 2324100 S |
| ELYTB I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1333500 2362200 |
| -3619500 2362200 |
| -3924300 2057400 |
| -3924300 -2057400 |
| -3619500 -2362200 |
| -1333500 -2362200 |
| OPEN 4 300000 0 |
| 1333500 2362200 |
| 3924300 2362200 |
| 3924300 -2362200 |
| 1333500 -2362200 |
| -5232429 -592116 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2274039 10133936 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2274039 6015735 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2476500 0 -2588700 -600000 |
| T2476500 0 2183700 -585000 |
| PAD 0 5 |
| -2 2095500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 2324100 RF 90.000 4038600 0 |
| 23 1943100 RF 90.000 3657600 0 |
| ELYTC I 0 0 2 2 1 2 2 |
| OPEN 6 300000 0 |
| -2095500 2667000 |
| -5524500 2667000 |
| -5829300 2377937 |
| -5829300 -2358906 |
| -5524500 -2667000 |
| -2095500 -2667000 |
| OPEN 4 300000 0 |
| 2095500 2667000 |
| 5829300 2667000 |
| 5829300 -2667000 |
| 2095500 -2667000 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -7281389 -522186 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2345177 3367048 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2475293 7574104 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-3810000 0 -3922200 -600000 |
| T3810000 0 3517200 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4038600 0 |
| 23 3086100 RF 90.000 3657600 0 |
| ELYTD I 0 0 2 2 1 2 2 |
| OPEN 6 299847 0 |
| -3048000 3505200 |
| -6477000 3505200 |
| -6858000 3124200 |
| -6858000 -3124200 |
| -6477000 -3505200 |
| -2971800 -3505200 |
| OPEN 4 300000 0 |
| 3048000 3505200 |
| 6858000 3505200 |
| 6858000 -3505200 |
| 3048000 -3505200 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -8302901 -620739 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2122481 4358106 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2170638 8692198 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-4800600 0 -4912800 -600000 |
| T4800600 0 4507800 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 4572000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4800600 0 |
| 23 3086100 RF 90.000 4419600 0 |
| CE020X5 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4000500 0 |
| -4000500 0 |
| -5257847 -629938 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE025X6 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4953000 0 |
| -4953000 0 |
| -6430981 -671836 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 6477000 0 |
| -6477000 0 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 8001000 0 |
| -8001000 0 |
| -9946160 -766682 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X13 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 10287000 0 |
| -10287000 0 |
| -12356954 -891778 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE075X16 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 12382500 0 |
| -12382500 0 |
| -14624835 -1147354 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2731444 18839171 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2449944 13490664 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1714500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE075X18 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 13982700 0 |
| -13982700 0 |
| -16300121 -922964 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2234097 14901313 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| VALUE -2157651 20558301 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1524000 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE020X5/L I 0 0 3 2 2 1 2 |
| CLOSED 5 299847 0 |
| -4000500 -2286000 |
| 3848100 -2286000 |
| 3848100 -18554700 |
| -4000500 -18554700 |
| -4000500 -2286000 |
| OPEN 2 299847 0 |
| -1409700 -1524000 |
| -1409700 -2286000 |
| OPEN 2 299847 0 |
| 1524000 -1524000 |
| 1524000 -2286000 |
| -4000500 -838200 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CE025X6/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -4914900 -2286000 |
| 4914900 -2286000 |
| 4914900 -18478500 |
| -4914900 -18478500 |
| -4914900 -2286000 |
| OPEN 3 300000 0 |
| -1828800 -1524000 |
| -1866900 -2286000 |
| -1943100 -2247900 |
| OPEN 2 300000 0 |
| 1905000 -1524000 |
| 1905000 -2286000 |
| -4648200 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -6400800 -2286000 |
| 6438900 -2286000 |
| 6438900 -18554700 |
| -6400800 -18554700 |
| -6400800 -2286000 |
| OPEN 2 300000 0 |
| -2590800 -1524000 |
| -2590800 -2286000 |
| OPEN 2 300000 0 |
| 2705100 -1524000 |
| 2705100 -2286000 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -8001000 -2667000 |
| 7924800 -2667000 |
| 7924800 -25984200 |
| -8001000 -25984200 |
| -8001000 -2667000 |
| OPEN 2 300000 0 |
| -3810000 -1524000 |
| -3810000 -2667000 |
| OPEN 2 300000 0 |
| 3810000 -1524000 |
| 3810000 -2667000 |
| -6591300 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CANNON25M M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 1 |
| -26670000 -3048000 |
| -26670000 3467100 |
| 26670000 3467100 |
| 26670000 -3238500 |
| -2819400 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1905000 8229600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1828800 4305300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 0 -24750000 0 |
| T-20625000 0 -20625000 0 |
| T-16500000 0 -16500000 0 |
| T-12375000 0 -12375000 0 |
| T-8250000 0 -8250000 0 |
| T-4125000 0 -4125000 0 |
| T0 0 0 0 |
| T4125000 0 4125000 0 |
| T8250000 0 8250000 0 |
| T12375000 0 12375000 0 |
| T16500000 0 16500000 0 |
| T20625000 0 20625000 0 |
| T24750000 0 24750000 0 |
| T-22687500 0 -22687500 0 |
| T-18562500 0 -18562500 0 |
| T-14437500 0 -14437500 0 |
| T-10312500 0 -10312500 0 |
| T-6187500 0 -6187500 0 |
| T-2062500 0 -2062500 0 |
| T2062500 0 2062500 0 |
| T6187500 0 6187500 0 |
| T10312500 0 10312500 0 |
| T14437500 0 14437500 0 |
| T18562500 0 18562500 0 |
| T22687500 0 22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| CANNON9F M 8520000 -2130000 1 11 3 1 2 |
| CLOSED 5 300000 0 |
| -23400000 9450000 |
| 23400000 9450000 |
| 23400000 -9450000 |
| -23400000 -9450000 |
| -23400000 9450000 |
| -2445000 -7365000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -4725000 14160000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -4650000 10275000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90 M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -13500000 |
| -23400000 -13500000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -13500000 |
| -13200000 -23400000 |
| 13200000 -23400000 |
| 13200000 -13500000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90/L M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -17100000 |
| -23400000 -17100000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -17100000 |
| -13200000 -27300000 |
| 13200000 -27300000 |
| 13200000 -17100000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F/T I 8520000 -2130000 1 11 8 1 2 |
| OPEN 4 300000 1 |
| -10668000 -3048000 |
| -10668000 3810000 |
| 10668000 3810000 |
| 10668000 -3048000 |
| -3467100 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1866900 8572500 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1866900 4533900 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10934700 381000 -10934700 381000 |
| T10706100 -38100 10706100 -38100 |
| PAD 0 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 1 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 2 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 3 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 4 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 5 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 10 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| PAD 11 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| CANNON25F M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T24750000 1905000 24750000 1905000 |
| T20625000 1905000 20625000 1905000 |
| T16500000 1905000 16500000 1905000 |
| T12375000 1905000 12375000 1905000 |
| T8250000 1905000 8250000 1905000 |
| T4125000 1905000 4125000 1905000 |
| T0 1905000 0 1905000 |
| T-4125000 1905000 -4125000 1905000 |
| T-8250000 1905000 -8250000 1905000 |
| T-12375000 1905000 -12375000 1905000 |
| T-16500000 1905000 -16500000 1905000 |
| T-20625000 1905000 -20625000 1905000 |
| T-24750000 1905000 -24750000 1905000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 0 |
| -26670000 -3048000 |
| -26670000 3581400 |
| 26670000 3581400 |
| 26670000 -3048000 |
| -2971800 -5905500 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2133600 4610100 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2324100 8610600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 0 24750000 0 |
| T20625000 0 20625000 0 |
| T16500000 0 16500000 0 |
| T12375000 0 12375000 0 |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T-12375000 0 -12375000 0 |
| T-16500000 0 -16500000 0 |
| T-20625000 0 -20625000 0 |
| T-24750000 0 -24750000 0 |
| T22687500 0 22687500 0 |
| T18562500 0 18562500 0 |
| T14437500 0 14437500 0 |
| T10312500 0 10312500 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10312500 0 -10312500 0 |
| T-14437500 0 -14437500 0 |
| T-18562500 0 -18562500 0 |
| T-22687500 0 -22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| SOD87 I 0 0 2 2 1 1 2 |
| OPEN 4 304800 0 |
| 1333500 1524000 |
| 3429000 1524000 |
| 3429000 -1524000 |
| 1333500 -1524000 |
| OPEN 6 304800 0 |
| -1333500 1524000 |
| -3124200 1524000 |
| -3505200 1219200 |
| -3505200 -1219200 |
| -3124200 -1524000 |
| -1333500 -1524000 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -2019300 2247900 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2057400 6515100 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2286000 0 -2438400 -495300 |
| T2286000 0 1981200 -571500 |
| PAD 0 5 |
| -2 1524000 RF 90.000 2286000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1752600 RF 90.000 2514600 0 |
| 23 1371600 RF 90.000 2133600 0 |
| DO201 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -7050000 2400000 |
| -5550000 3900000 |
| 7050000 3900000 |
| 7050000 -3900000 |
| -5550000 -3900000 |
| -7050000 -2400000 |
| -7050000 2400000 |
| OPEN 2 300000 0 |
| -5448300 3886200 |
| -5448300 -3886200 |
| OPEN 2 304800 1 |
| -7050000 0 |
| -8250000 0 |
| OPEN 2 304800 1 |
| 7050000 0 |
| 8250000 0 |
| -9486900 2819400 0.000 26 3000000 300000 N LEFT DOWN 0 |
| K |
| VALUE -2895600 4762500 0.000 1 3000000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -3276600 10096500 0.000 1 3000000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 3924300 R 1981200 |
| -1 3924300 R |
| 0 3924300 R |
| 21 4152900 R |
| 28 4152900 R |
| DO41 M 0 0 2 2 1 1 2 |
| CLOSED 7 300000 0 |
| -5250000 1500000 |
| -4500000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -4500000 -2250000 |
| -5250000 -1500000 |
| -5250000 1500000 |
| OPEN 2 300000 0 |
| -4457700 2247900 |
| -4457700 -2171700 |
| -6019800 -3505200 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| MELF I 0 0 2 2 1 2 2 |
| OPEN 6 304800 0 |
| -2667000 2400300 |
| -4762500 2400300 |
| -5143500 2019300 |
| -5143500 -2019300 |
| -4762500 -2400300 |
| -2667000 -2400300 |
| OPEN 4 304800 0 |
| 2667000 2400300 |
| 5143500 2400300 |
| 5143500 -2400300 |
| 2667000 -2400300 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -6705600 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| ¨K |
| VALUE -1981200 10591800 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2057400 4876800 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3733800 0 -3886200 -495300 |
| T3733800 0 3429000 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 4000500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 4229100 0 |
| 23 1752600 RF 90.000 3848100 0 |
| MINIMELF I 0 0 2 2 1 1 2 |
| OPEN 6 304800 0 |
| -1524000 1905000 |
| -3810000 1905000 |
| -4114800 1600200 |
| -4114800 -1600200 |
| -3810000 -1905000 |
| -1524000 -1905000 |
| OPEN 4 304800 0 |
| 1524000 1905000 |
| 4000500 1905000 |
| 4000500 -1905000 |
| 1524000 -1905000 |
| -5372100 -914400 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -1943100 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2095500 2476500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2781300 -495300 |
| T2628900 0 2324100 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 2857500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 3086100 0 |
| 23 1752600 RF 90.000 2705100 0 |
| DO35 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -2250000 1050000 |
| -1800000 1500000 |
| 2250000 1500000 |
| 2250000 -1500000 |
| -1800000 -1500000 |
| -2250000 -1050000 |
| -2250000 1050000 |
| OPEN 2 300000 0 |
| -1524000 1485900 |
| -1524000 -1409700 |
| OPEN 2 304800 1 |
| -2250000 0 |
| -3300000 0 |
| OPEN 2 304800 1 |
| 2250000 0 |
| 3300000 0 |
| -3750000 1500000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1790700 5981700 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1981200 2019300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-4762500 0 -4912500 -600000 |
| T4762500 0 4462500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| DS040 M 0 0 2 2 1 1 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| OPEN 2 300000 0 |
| 1524000 0 |
| -1524000 0 |
| -5181600 -723900 0.000 26 2250000 300000 N LEFT DOWN 0 |
| K |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| TO220AC M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 2925000 -8175000 |
| -4575000 -8175000 |
| -4575000 8325000 |
| 2925000 8325000 |
| 2925000 -8175000 |
| OPEN 2 1200000 0 |
| -4575000 -7725000 |
| -4575000 7875000 |
| -240000 -7170000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -3000000 9450000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2925000 13575000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-75000 3885000 -417900 3389700 |
| T-75000 -3735000 -303600 -4268400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| TO220AB M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 3000000 -8250000 |
| -4500000 -8250000 |
| -4500000 8250000 |
| 3000000 8250000 |
| 3000000 -8250000 |
| OPEN 2 1200000 0 |
| -4500000 -7800000 |
| -4500000 7800000 |
| -190500 -5143500 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -2400000 13425000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2775000 9300000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T0 1905000 -342900 1409700 |
| T0 -1905000 -228600 -2438400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| JUMP1 I 0 0 1 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -1905000 |
| -1905000 -1905000 |
| -1905000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP1_90 I 0 0 2 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -6096000 |
| -1905000 -6096000 |
| -1905000 1905000 |
| OPEN 2 300000 0 |
| -1905000 -1905000 |
| 1905000 -1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -1905000 |
| -3810000 -1905000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2_90 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -6096000 |
| -3810000 -6096000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| ARK050X2 M 3810000 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -7500000 6750000 |
| 7500000 6750000 |
| 7500000 -6750000 |
| -7500000 -6750000 |
| -7500000 6750000 |
| VALUE -2250000 7500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 11250000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -4038600 -495300 |
| T3810000 0 3810000 0 |
| PAD 0 5 |
| -2 2857500 S 1524000 |
| -1 2857500 S |
| 0 2857500 S |
| 21 3086100 S |
| 28 3086100 S |
| PAD 2 5 |
| -2 2857500 R 1524000 |
| -1 2857500 R |
| 0 2857500 R |
| 21 3086100 R |
| 28 3086100 R |
| CROSS I 0 0 10 1 1 0 2 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 190500 |
| OPEN 2 266700 0 |
| 0 0 |
| 190500 0 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 -190500 |
| OPEN 2 266700 0 |
| 0 0 |
| -190500 0 |
| OPEN 2 266700 0 |
| 571500 0 |
| 2476500 0 |
| OPEN 2 266700 0 |
| 0 -571500 |
| 0 -1866900 |
| OPEN 2 266700 0 |
| 0 571500 |
| 0 2286000 |
| OPEN 2 266700 0 |
| -2286000 0 |
| -571500 0 |
| CIRCLE 2 266700 0 |
| 0 -1143000 |
| 0 1143000 |
| CIRCLE 2 266700 0 |
| 0 -762000 |
| 0 762000 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 3 |
| -2 0 R 76200 |
| -1 0 R |
| 0 0 R |
| HOLE_M3 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 9000000 R 4800000 |
| -1 9000000 R |
| 0 9000000 R |
| 21 9225000 R |
| 28 9225000 R |
| HOLE_M4 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 13500000 R 6300000 |
| -1 13500000 R |
| 0 13500000 R |
| 21 13725000 R |
| 28 13725000 R |
| HOLE_M2 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| T0 0 0 0 |
| PAD 0 5 |
| -2 6750000 R 3150000 |
| -1 6750000 R |
| 0 6750000 R |
| 21 6975000 R |
| 28 6975000 R |
| R0805 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -609600 1333500 |
| -2590800 1333500 |
| -2590800 -1333500 |
| -609600 -1333500 |
| OPEN 4 304800 0 |
| 609600 1333500 |
| 2590800 1333500 |
| 2590800 -1333500 |
| 609600 -1333500 |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-1447800 0 -1333500 -571500 |
| T1447800 0 1481570 -571500 |
| PAD 0 5 |
| -2 1485900 RF 90.000 1943100 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1714500 RF 90.000 2171700 0 |
| 23 1333500 RF 90.000 1790700 0 |
| R0603 I 0 0 2 2 1 0 2 |
| OPEN 4 300000 0 |
| -457200 1143000 |
| -2209800 1143000 |
| -2209800 -1143000 |
| -457200 -1143000 |
| OPEN 4 300000 0 |
| 457200 1143000 |
| 2209800 1143000 |
| 2209800 -1143000 |
| 457200 -1143000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-1143000 0 -1333500 -571500 |
| T1143000 0 838200 -571500 |
| PAD 0 5 |
| -2 1333500 RF 90.000 1524000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1562100 RF 90.000 1752600 0 |
| 23 1181100 RF 90.000 1371600 0 |
| R1206 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1295400 1714500 |
| -3429000 1714500 |
| -3429000 -1714500 |
| -1295400 -1714500 |
| OPEN 4 304800 0 |
| 1295400 1714500 |
| 3429000 1714500 |
| 3429000 -1714500 |
| 1295400 -1714500 |
| VALUE -2247900 2324100 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2171700 0 -2283900 -600000 |
| T2171700 0 1878900 -585000 |
| PAD 0 5 |
| -2 1638300 RF 90.000 2667000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1866900 RF 90.000 2895600 0 |
| 23 1409700 RF 90.000 2514600 0 |
| RS025 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 495000 0 |
| -4305000 0 |
| VALUE -2250000 2700000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 6600000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2055000 -600000 |
| T1905000 0 1605000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL090 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -5250000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -5250000 -2250000 |
| -5250000 2250000 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL140 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -9000000 3450000 |
| 9000000 3450000 |
| 9000000 -3450000 |
| -9000000 -3450000 |
| -9000000 3450000 |
| VALUE -1800000 4050000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1950000 8100000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RS040 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| R1812 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1905000 3048000 |
| -4876800 3048000 |
| -4876800 -3048000 |
| -1905000 -3048000 |
| OPEN 4 304800 0 |
| 1905000 3048000 |
| 4876800 3048000 |
| 4876800 -3048000 |
| 1905000 -3048000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2171700 6286500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3543300 0 -3429000 -571500 |
| T3543300 0 3577070 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 5334000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2095500 RF 90.000 5524500 0 |
| 23 1714500 RF 90.000 5181600 0 |
| DIP16_300 I 0 0 1 16 2 0 2 |
| CLOSED 9 300000 0 |
| -3810000 15240000 |
| -1143000 15240000 |
| -1143000 12954000 |
| 1143000 12954000 |
| 1143000 15240000 |
| 3810000 15240000 |
| 3810000 -15240000 |
| -3810000 -15240000 |
| -3810000 15240000 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| T-5715000 13335000 -5715000 13335000 |
| T-5715000 9525000 -5715000 9525000 |
| T-5715000 5715000 -5715000 5715000 |
| T-5715000 1905000 -5715000 1905000 |
| T-5715000 -1905000 -5715000 -1905000 |
| T-5715000 -5715000 -5715000 -5715000 |
| T-5715000 -9525000 -5715000 -9525000 |
| T-5715000 -13335000 -5715000 -13335000 |
| T5715000 -13335000 5715000 -13335000 |
| T5715000 -9525000 5715000 -9525000 |
| T5715000 -5715000 5715000 -5715000 |
| T5715000 -1905000 5715000 -1905000 |
| T5715000 1905000 5715000 1905000 |
| T5715000 5715000 5715000 5715000 |
| T5715000 9525000 5715000 9525000 |
| T5715000 13335000 5715000 13335000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2514600 R |
| 28 2514600 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2514600 S |
| 28 2514600 S |
| *PARTTYPE* ITEMS |
| *REMARK* NAME DECALNM UNITS TYPE GATES SIGPINS PINNMS FLAGS ECO |
| *REMARK* G/S SWAPTYPE PINS |
| *REMARK* PIN.SWAPTYPE.PINTYPE.FUNCNAME |
| *REMARK* SIGPIN PIN WIDTH SIGNAME |
| ELYT ELYTA:ELYTB:ELYTC:ELYTD:CE020X5:CE025X6:CE035X8:CE050X10:CE050X13:CE075X16:CE075X18:CE020X5/L:CE025X6/L:CE035X8/L:CE050X10/L I CAP 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| A C |
| DB25M CANNON25M:CANNON25M_90:CANNON25M_90/L:CANNON25M/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| DB9F CANNON9F:CANNON9F_90:CANNON9F_90/L:CANNON9F/T I CON 1 0 0 0 Y |
| G 0 11 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U |
| DB25F CANNON25F:CANNON25F_90:CANNON25F_90/L:CANNON25F/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| D SOD87:DO201:DO41:MELF:MINIMELF:DO35:DS040:TO220AC:TO220AB I DIO 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| C A |
| JUMP1 JUMP1:JUMP1_90 I CON 1 0 0 0 Y |
| G 0 1 |
| 1.0.Z |
| JUMP2 JUMP2:JUMP2_90:ARK050X2 I CON 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| CROSS CROSS I MEC 0 0 0 0 Y |
| HOLE HOLE_M3:HOLE_M4:HOLE_M2 I MEC 0 0 0 0 Y |
| R R0805:R0603:R1206:RS025:RL090:RL140:RS040:R1812 I RES 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| DIP16 DIP16_300 I DIP 1 0 0 0 Y |
| G 0 16 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U |
| *PART* ITEMS |
| *REMARK* REFNM PTYPENM X Y ORI GLUE MIRROR ALT CLSTID CLSTATTR BROTHERID LABELS |
| *REMARK* .REUSE. INSTANCE RPART |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| C1 ELYT 128016000 103632000 270.000 U N 8 -1 0 -1 2 |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| CON1 DB25M 147447000 62484000 90.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| CON3 DB9F 53721000 103632000 180.000 U N 1 -1 0 -1 2 |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| CON4 DB25F 21717000 62484000 270.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| D1 D 81534000 99822000 270.000 U N 2 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J1 JUMP1 105003600 39319200 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J2 JUMP1 105270300 28041600 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J3 JUMP2 47244000 94107000 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| M1 CROSS 3810000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M2 CROSS 167640000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M3 CROSS 167640000 121920000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M4 HOLE 16764000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M5 HOLE 152400000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M6 HOLE 152400000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M7 HOLE 16764000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| R1 R 98298000 60960000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R11 R 71628000 68580000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R12 R 71628000 74676000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R13 R 71628000 80772000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R14 R 71628000 86868000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R2 R 98298000 66294000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R3 R 98298000 71628000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R4 R 98298000 76962000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| U1 DIP16 127673100 71475600 0.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U2 DIP16 100584000 99822000 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U6 DIP16 47510700 29908500 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U7 DIP16 80543400 30175200 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| *ROUTE* |
| *REMARK* *SIGNAL* SIGNAME SIGFLAG COLOR |
| *REMARK* REFNM.PIN .REUSE. INSTANCE RSIG REFNM.PIN .REUSE. INSTANCE RSIG |
| *REMARK* XLOC YLOC LAYER SEGMENTWIDTH FLAGS [ARCDIR/VIANAME] [TEARDROP [P WID LEN [FLAGS]] [N WID LEN [FLAGS]]] [JMPNM JMPFLAG] REUSE INST RSIG |
| *SIGNAL* RTS 0 -2 |
| CON3.7 U7.6 |
| 51658500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 51658500 98074500 1 609600 1536 |
| 55626000 94107000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP1 S |
| 118872000 43434000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 116141280 40703280 1 609600 3584 |
| 116141280 34925345 1 609600 3584 |
| 102856735 21640800 1 609600 3584 |
| 89077800 21640800 1 609600 3584 |
| 86258400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DTR 0 -2 |
| CON3.4 U7.7 |
| 57846000 101502000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 60837528 98510472 1 609600 1536 |
| 60837528 98420472 1 609600 1536 |
| 63627000 95631000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP2 E |
| 113538000 42672000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 113538000 33722985 1 609600 3584 |
| 102446415 22631400 1 609600 3584 |
| 91897200 22631400 1 609600 3584 |
| 90068400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RI 0 -2 |
| CON3.9 U2.15 |
| 59908500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62906700 105762000 1 609600 1536 |
| 70104000 98564700 1 609600 1536 |
| 78714600 98564700 1 609600 1536 |
| 80962500 100812600 1 609600 1536 |
| 86525100 100812600 1 609600 1536 |
| 91059000 105346500 1 609600 1536 |
| 91059000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* CTS 0 -2 |
| CON3.8 U2.13 |
| 55783500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55783500 107632498 1 609600 1536 |
| 57498002 109347000 1 609600 1536 |
| 94869000 109347000 1 609600 1536 |
| 98679000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DSR 0 -2 |
| CON3.6 U2.11 |
| 47533500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52109100 110337600 1 609600 1536 |
| 101498400 110337600 1 609600 1536 |
| 106299000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D4 0 -2 |
| U7.2 CON1.6 |
| 71018400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 77800200 17678400 1 609600 1536 |
| 104636400 17678400 1 609600 1536 |
| 145317000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D6 0 -2 |
| CON1.8 U7.4 |
| 145317000 66609000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139257300 60549300 1 609600 1536 |
| 139257300 55239525 1 609600 1536 |
| 103677375 19659600 1 609600 1536 |
| 83439000 19659600 1 609600 1536 |
| 78638400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D7 0 -2 |
| CON1.9 U7.5 |
| 145317000 70734000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138266700 63683700 1 609600 1536 |
| 138266700 55649845 1 609600 1536 |
| 103267055 20650200 1 609600 1536 |
| 86258400 20650200 1 609600 1536 |
| 82448400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D5 0 -2 |
| U7.3 CON1.7 |
| 74828400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80619600 18669000 1 609600 1536 |
| 104087695 18669000 1 609600 1536 |
| 140247900 54829205 1 609600 1536 |
| 140247900 57414900 1 609600 1536 |
| 145317000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N21518 0 -2 |
| D1.C U2.16 |
| 81534000 106489500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 83896200 106489500 1 609600 1536 |
| 84848700 105537000 1 609600 1536 |
| 87249000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.16 U2.14 |
| 87249000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87249000 107213398 1 609600 1536 |
| 88392002 108356400 1 609600 1536 |
| 93725998 108356400 1 609600 1536 |
| 94869000 107213398 1 609600 1536 |
| 94869000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.14 U2.12 |
| 94869000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 96697800 103708200 1 609600 1536 |
| 100660200 103708200 1 609600 1536 |
| 102489000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.12 U2.10 |
| 102489000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 104317800 103708200 1 609600 1536 |
| 108280200 103708200 1 609600 1536 |
| 110109000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.10 C1.A |
| 110109000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 111937800 103708200 1 609600 1536 |
| 120396000 103708200 1 609600 1536 |
| 124129800 107442000 1 609600 1536 |
| 128016000 107442000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_1 0 -2 |
| CON1.14 U6.2 |
| 149577000 39796500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 39796500 1 609600 1536 |
| 114175259 10744200 1 609600 1536 |
| 51435000 10744200 1 609600 1536 |
| 37985700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_2 0 -2 |
| U6.5 CON1.16 |
| 49415700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 59893200 13716000 1 609600 1536 |
| 108235479 13716000 1 609600 1536 |
| 142565979 48046500 1 609600 1536 |
| 149577000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_3 0 -2 |
| CON1.17 U6.7 |
| 149577000 52171500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143889139 52171500 1 609600 1536 |
| 107414839 15697200 1 609600 1536 |
| 65532000 15697200 1 609600 1536 |
| 57035700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_6 0 -2 |
| CON1.10 U1.10 |
| 145317000 74859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139293600 68835600 1 609600 1536 |
| 139293600 67856100 1 609600 1536 |
| 133388100 61950600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_7 0 -2 |
| CON1.11 U1.12 |
| 145317000 78984000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143485500 77152500 1 609600 1536 |
| 140970000 77152500 1 609600 1536 |
| 133388100 69570600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_5 0 -2 |
| U1.14 CON1.12 |
| 133388100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 136283700 80086200 1 609600 1536 |
| 142294200 80086200 1 609600 1536 |
| 145317000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_4 0 -2 |
| U1.16 CON1.13 |
| 133388100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138036300 84810600 1 609600 1536 |
| 140459700 87234000 1 609600 1536 |
| 145317000 87234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_0 0 -2 |
| U6.16 CON4.14 |
| 34175700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 30002700 39796500 1 609600 1536 |
| 19587000 39796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_1 0 -2 |
| U6.15 CON4.2 |
| 37985700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 31750200 41859000 1 609600 1536 |
| 23622000 41859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_2 0 -2 |
| U6.12 CON4.16 |
| 49415700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 36992700 48046500 1 609600 1536 |
| 19587000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_3 0 -2 |
| U6.10 CON4.17 |
| 57035700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 40487700 52171500 1 609600 1536 |
| 19587000 52171500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_0 0 -2 |
| U6.14 CON4.15 |
| 41795700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 33497700 43921500 1 609600 1536 |
| 19587000 43921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_1 0 -2 |
| U6.13 CON4.3 |
| 45605700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 35245200 45984000 1 609600 1536 |
| 23622000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_2 0 -2 |
| U6.11 CON4.4 |
| 53225700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 38740200 50109000 1 609600 1536 |
| 23622000 50109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_3 0 -2 |
| U7.16 CON4.5 |
| 67208400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48864600 54234000 1 609600 1536 |
| 23622000 54234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_4 0 -2 |
| U7.15 CON4.18 |
| 71018400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 50612100 56296500 1 609600 1536 |
| 19587000 56296500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_5 0 -2 |
| U7.14 CON4.6 |
| 74828400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52359600 58359000 1 609600 1536 |
| 23622000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_6 0 -2 |
| U7.13 CON4.19 |
| 78638400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55168800 59359800 1 609600 1536 |
| 25488900 59359800 1 609600 1536 |
| 24427200 60421500 1 609600 1536 |
| 19587000 60421500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_7 0 -2 |
| U7.12 CON4.7 |
| 82448400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57988200 60350400 1 609600 1536 |
| 27622500 60350400 1 609600 1536 |
| 25488900 62484000 1 609600 1536 |
| 23622000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_RTS 0 -2 |
| U7.11 CON4.20 |
| 86258400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57602100 64546500 1 609600 1536 |
| 19587000 64546500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_DTR 0 -2 |
| U7.10 CON4.8 |
| 90068400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 73075800 52882800 1 609600 1536 |
| 71856600 52882800 1 609600 1536 |
| 58130400 66609000 1 609600 1536 |
| 23622000 66609000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_4 0 -2 |
| R4.2 CON4.10 |
| 91630500 76962000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 81419700 66751200 1 609600 1536 |
| 63627000 66751200 1 609600 1536 |
| 55519200 74859000 1 609600 1536 |
| 23622000 74859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_5 0 -2 |
| R3.2 CON4.22 |
| 91630500 71628000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 85763100 65760600 1 609600 1536 |
| 63207900 65760600 1 609600 1536 |
| 56172000 72796500 1 609600 1536 |
| 19587000 72796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_6 0 -2 |
| R1.2 CON4.21 |
| 91630500 60960000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 65189100 60960000 1 609600 1536 |
| 57477600 68671500 1 609600 1536 |
| 19587000 68671500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_7 0 -2 |
| R2.2 CON4.9 |
| 91630500 66294000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 88811100 66294000 1 609600 1536 |
| 87287100 64770000 1 609600 1536 |
| 62788800 64770000 1 609600 1536 |
| 56824800 70734000 1 609600 1536 |
| 23622000 70734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_3 0 -2 |
| R11.2 CON4.23 |
| 64960500 68580000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 56619000 76921500 1 609600 1536 |
| 19587000 76921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_DSR 0 -2 |
| R12.2 CON4.11 |
| 64960500 74676000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 61760100 74676000 1 609600 1536 |
| 57452100 78984000 1 609600 1536 |
| 23622000 78984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_CTS 0 -2 |
| R13.2 CON4.24 |
| 64960500 80772000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 44005500 80772000 1 609600 1536 |
| 43731000 81046500 1 609600 1536 |
| 19587000 81046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_RI 0 -2 |
| R14.2 CON4.12 |
| 64960500 86868000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 46253400 86868000 1 609600 1536 |
| 42494400 83109000 1 609600 1536 |
| 23622000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_3 0 -2 |
| CON1.15 U2.9 |
| 149577000 43921500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 151599900 45944400 1 609600 1536 |
| 151599900 48046500 1 609600 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 151599900 99098100 1 609600 1536 |
| 141427200 109270800 1 609600 1536 |
| 122377200 109270800 1 609600 1536 |
| 118643400 105537000 1 609600 1536 |
| 113919000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* TXD 0 -2 |
| D1.A CON3.3 |
| 81534000 93154500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62068500 93154500 1 609600 1536 |
| 53721000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01853 0 -2 |
| U1.7 R1.1 |
| 121958100 61950600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 113957100 61950600 1 609600 1536 |
| 112966500 60960000 1 609600 1536 |
| 104965500 60960000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01906 0 -2 |
| U1.5 R2.1 |
| 121958100 69570600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 116243100 69570600 1 609600 1536 |
| 112966500 66294000 1 609600 1536 |
| 104965500 66294000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01959 0 -2 |
| U1.3 R3.1 |
| 121958100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 118529100 77190600 1 609600 1536 |
| 112966500 71628000 1 609600 1536 |
| 104965500 71628000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02012 0 -2 |
| U1.1 R4.1 |
| 121958100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 117881400 80733900 1 609600 1536 |
| 108737400 80733900 1 609600 1536 |
| 104965500 76962000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02164 0 -2 |
| U2.7 R11.1 |
| 110109000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 101841300 85839300 1 609600 1536 |
| 95097600 85839300 1 609600 1536 |
| 78295500 69037200 1 609600 1536 |
| 78295500 68580000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02168 0 -2 |
| U2.3 R13.1 |
| 94869000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87896700 87134700 1 609600 1536 |
| 84658200 87134700 1 609600 1536 |
| 78295500 80772000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02134 0 -2 |
| U2.5 R12.1 |
| 102489000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 98221800 89839800 1 609600 1536 |
| 93459300 89839800 1 609600 1536 |
| 78295500 74676000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02160 0 -2 |
| U2.1 R14.1 |
| 87249000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80010000 86868000 1 609600 1536 |
| 78295500 86868000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* GND 0 -2 |
| CON1.18 CON1.19 |
| 149577000 56296500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 60421500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.19 CON1.20 |
| 149577000 60421500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 64546500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.20 CON1.21 |
| 149577000 64546500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 68671500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.21 CON1.22 |
| 149577000 68671500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 72796500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.22 CON1.23 |
| 149577000 72796500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 76921500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.23 CON1.24 |
| 149577000 76921500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 81046500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.24 CON1.25 |
| 149577000 81046500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 85171500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.25 U1.15 |
| 149577000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 87210898 1 952500 1536 |
| 147329098 89458800 1 952500 1536 |
| 135178800 89458800 1 952500 1536 |
| 131368800 85648800 1 952500 1536 |
| 131368800 84810600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 83019900 1 952500 1536 |
| 133388100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.15 U1.13 |
| 133388100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 78981300 1 952500 1536 |
| 131368800 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 75399900 1 952500 1536 |
| 133388100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.13 U1.11 |
| 133388100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 71361300 1 952500 1536 |
| 131368800 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 67779900 1 952500 1536 |
| 133388100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.11 U1.9 |
| 133388100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 63741300 1 952500 1536 |
| 131368800 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 60159900 1 952500 1536 |
| 133388100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.9 U1.8 |
| 133388100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U1.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 105270300 33323283 1 952500 1536 |
| 109318425 37371408 1 952500 1536 |
| 109318425 45500925 1 952500 1536 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.8 U1.6 |
| 121958100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 60159900 1 952500 1536 |
| 123977400 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 63741300 1 952500 1536 |
| 121958100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U7.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101365050 28041600 1 952500 1536 |
| 97783650 24460200 1 952500 1536 |
| 93878400 24460200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.6 U1.4 |
| 121958100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 67779900 1 952500 1536 |
| 123977400 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 71361300 1 952500 1536 |
| 121958100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.4 U1.2 |
| 121958100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 75399900 1 952500 1536 |
| 123977400 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 78981300 1 952500 1536 |
| 121958100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.2 C1.C |
| 121958100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 128016000 87058500 1 952500 1536 |
| 128016000 99822000 65 952500 768 THERMAL TEARDROP P 90 90 |
| C1.C U2.8 |
| 128016000 99822000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 122301000 94107000 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.6 U2.8 |
| 106299000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 108318300 96126300 1 952500 1536 |
| 111899700 96126300 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.4 U2.6 |
| 98679000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 100698300 96126300 1 952500 1536 |
| 104279700 96126300 1 952500 1536 |
| 106299000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 U2.4 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 93078300 96126300 1 952500 1536 |
| 96659700 96126300 1 952500 1536 |
| 98679000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON3.5 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 82600800 96393000 1 952500 1536 |
| 67080000 96393000 1 952500 1536 |
| 61971000 101502000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON4.13 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 83972400 92735400 1 952500 1536 |
| 81229200 89992200 1 952500 1536 |
| 47358300 89992200 1 952500 1536 |
| 44600100 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.25 CON4.13 |
| 19587000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 21297900 86882400 1 952500 1536 |
| 21297900 86967300 1 952500 1536 |
| 21564600 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.8 U6.8 |
| 93878400 24460200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 26460450 1 952500 1536 |
| 63112650 26460450 1 952500 1536 |
| 60845700 24193500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* STROBE 0 -2 |
| U6.1 CON1.1 |
| 34175700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48615600 9753600 1 609600 1536 |
| 117336600 9753600 1 609600 1536 |
| 145317000 37734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D0 0 -2 |
| CON1.2 U6.3 |
| 145317000 41859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 41859000 1 609600 1536 |
| 113325900 11734800 1 609600 1536 |
| 54254400 11734800 1 609600 1536 |
| 41795700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D1 0 -2 |
| U6.4 CON1.3 |
| 45605700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57073800 12725400 1 609600 1536 |
| 112058400 12725400 1 609600 1536 |
| 145317000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DCD 0 -2 |
| J3.1 CON3.1 |
| 45339000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 45339000 97650300 1 609600 1536 |
| 45471000 97782300 1 609600 1536 |
| 45471000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D2 0 -2 |
| CON1.4 U6.6 |
| 145317000 50109000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 50109000 1 609600 1536 |
| 107825159 14706600 1 609600 1536 |
| 62712600 14706600 1 609600 1536 |
| 53225700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RXD 0 -2 |
| J3.2 CON3.2 |
| 49149000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 49149000 97497900 1 609600 1536 |
| 49596000 97944900 1 609600 1536 |
| 49596000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D3 0 -2 |
| CON1.5 U7.1 |
| 145317000 54234000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 54234000 1 609600 1536 |
| 105903900 16687800 1 609600 1536 |
| 74980800 16687800 1 609600 1536 |
| 67208400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* +12V 0 -2 |
| J1.1 U7.9 |
| 105003600 39319200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101155500 39319200 1 952500 1536 |
| 97726500 35890200 1 952500 1536 |
| 93878400 35890200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.9 U6.9 |
| 93878400 35890200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 33889950 1 952500 1536 |
| 65403484 33889950 1 952500 1536 |
| 63669934 35623500 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.1 U6.9 |
| 23622000 37734000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 27732750 33623250 1 952500 1536 |
| 58845450 33623250 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *POUR* POUR ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES FLAGS [OWNERNAME SIGNAME HATCHGRID HATCHRAD] |
| *REMARK* PIECETYPE CORNERS ARCS WIDTH LEVEL |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| HP26402539 POUROUT 6096000 119253000 1 0 HP26402539 GND |
| POLY 5 0 381000 1 |
| 2667000 -3048000 |
| 154686000 -3048000 |
| 154686000 -110490000 |
| 2667000 -110490000 |
| 2667000 -3048000 |
| ANP000003 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -630092783 -585044931 |
| -629958079 -584910227 2250 1519 |
| -629775891 -584854570 |
| -627954000 -584298000 1969 -68 |
| -629829001 -584634790 |
| -630016500 -584668469 101 1596 |
| -630203999 -584634790 |
| -632079000 -584298000 3498 -42 |
| -630233813 -584771647 |
| -630049295 -584819011 1656 593 |
| -630183999 -584953715 |
| -630092783 -585044931 |
| ANP000004 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -625967783 -585044931 |
| -625833079 -584910227 2250 1519 |
| -625650891 -584854570 |
| -623829000 -584298000 1969 -68 |
| -625704001 -584634790 |
| -625891500 -584668469 101 1596 |
| -626078999 -584634790 |
| -627954000 -584298000 3498 -42 |
| -626108813 -584771647 |
| -625924295 -584819011 1656 593 |
| -626058999 -584953715 |
| -625967783 -585044931 |
| ANP000005 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -635963391 -579481430 |
| -636145579 -579425773 3430 1519 |
| -636280283 -579291069 |
| -636371499 -579382285 |
| -636236795 -579516989 1350 593 |
| -636421313 -579564353 |
| -638266500 -580038000 143 -42 |
| -636391499 -579701210 |
| -636204000 -579667531 1901 1596 |
| -636016501 -579701210 |
| -634141500 -580038000 1698 -68 |
| -635963391 -579481430 |
| ANP000006 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 13 8 381000 1 |
| -629752196 -576663912 |
| -629886900 -576529208 3150 1350 |
| -629886900 -576338708 |
| -633249014 -576338708 |
| -633249014 -576529208 900 450 |
| -633383718 -576394504 |
| -634888431 -577899217 |
| -634753727 -578033921 1350 1519 |
| -634698070 -578216109 |
| -634141500 -580038000 1069 -968 |
| -632266499 -579701210 |
| -632079000 -579667531 1901 1596 |
| -631891501 -579701210 |
| -630016500 -580038000 1698 -492 |
| -630986326 -578398338 |
| -631083308 -578234372 3006 593 |
| -630892808 -578234372 |
| -630892808 -578167502 |
| -630016500 -578167502 1800 -450 |
| -630636143 -577547859 |
| -629752196 -576663912 |
| ANP000008 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 33 21 381000 1 |
| -597682500 -582155714 |
| -597817204 -582021010 3150 1576 |
| -597890583 -581845210 |
| -598551000 -580263000 2926 -785 |
| -599971455 -581223128 |
| -600129283 -581329808 340 559 |
| -600129283 -581139308 |
| -600951300 -581139308 |
| -600951300 -580263000 2700 -450 |
| -601570943 -580882643 |
| -602210982 -580242604 |
| -602345686 -580377308 450 450 |
| -602345686 -580186808 |
| -602687717 -580186808 |
| -602687717 -580377308 900 559 |
| -602845545 -580270628 |
| -604266000 -579310500 3259 -2159 |
| -604850985 -577698876 |
| -604915983 -577519808 2899 1600 |
| -604915983 -577329308 |
| -627860112 -577329308 |
| -627860112 -577519808 900 450 |
| -627994816 -577385104 |
| -628861442 -578251730 |
| -628726738 -578386434 1350 970 |
| -628843989 -578536576 |
| -630016500 -580038000 520 -418 |
| -628141499 -579701210 |
| -627954000 -579667531 1901 1596 |
| -627766501 -579701210 |
| -625891500 -580038000 1698 -1392 |
| -624251838 -579068174 |
| -624087872 -578971192 2106 593 |
| -624087872 -579161692 |
| -622893300 -579161692 |
| -622893300 -580038000 900 -450 |
| -622273657 -579418357 |
| -617301724 -584390290 |
| -617167020 -584255586 2250 1653 |
| -617002595 -584159384 |
| -613599000 -582168000 2103 -2857 |
| -612605439 -585984138 |
| -612557441 -586168492 1045 1654 |
| -612557441 -586358992 |
| -607527286 -586358992 |
| -607527286 -586168492 2700 450 |
| -607392582 -586303196 |
| -605457143 -584367757 |
| -604837500 -584987400 1350 -450 |
| -604837500 -584111092 |
| -599716786 -584111092 |
| -599716786 -583920592 2700 450 |
| -599582082 -584055296 |
| -597682500 -582155714 |
| ANP000014 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 15 12 381000 1 |
| -536559790 -640003499 |
| -536593469 -639816000 2801 1596 |
| -536559790 -639628501 |
| -536223000 -637753500 2598 -492 |
| -537862662 -638723326 |
| -538026628 -638820308 306 593 |
| -538026628 -638629808 |
| -538639159 -638629808 |
| -538639159 -638820308 900 1183 |
| -538806780 -638910825 |
| -540483000 -639816000 283 -1081 |
| -540146210 -641691001 |
| -540112531 -641878500 1001 1596 |
| -540146210 -642065999 |
| -540483000 -643941000 798 -1081 |
| -538806780 -644846175 |
| -538639159 -644936692 1516 1183 |
| -538639159 -645127192 |
| -538026628 -645127192 |
| -538026628 -644936692 2700 593 |
| -537862662 -645033674 |
| -536223000 -646003500 1493 -492 |
| -536559790 -644128499 |
| -536593469 -643941000 2801 1596 |
| -536559790 -643753501 |
| -536223000 -641878500 2598 -1596 |
| -536559790 -640003499 |
| ANP000015 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -602888817 |
| -535076408 -602493183 |
| -535266908 -602493183 0 1171 |
| -535353825 -602323667 |
| -536223000 -600628500 2971 -169 |
| -535886210 -602503501 |
| -535852531 -602691000 1001 1596 |
| -535886210 -602878499 |
| -536223000 -604753500 798 -169 |
| -535353825 -603058333 |
| -535266908 -602888817 2428 1171 |
| -535076408 -602888817 |
| ANP000016 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -607013817 |
| -535076408 -606618183 |
| -535266908 -606618183 0 1171 |
| -535353825 -606448667 |
| -536223000 -604753500 2971 -169 |
| -535886210 -606628501 |
| -535852531 -606816000 1001 1596 |
| -535886210 -607003499 |
| -536223000 -608878500 798 -169 |
| -535353825 -607183333 |
| -535266908 -607013817 2428 1171 |
| -535076408 -607013817 |
| ANP000017 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -611138817 |
| -535076408 -610743183 |
| -535266908 -610743183 0 1171 |
| -535353825 -610573667 |
| -536223000 -608878500 2971 -169 |
| -535886210 -610753501 |
| -535852531 -610941000 1001 1596 |
| -535886210 -611128499 |
| -536223000 -613003500 798 -169 |
| -535353825 -611308333 |
| -535266908 -611138817 2428 1171 |
| -535076408 -611138817 |
| ANP000018 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -615263817 |
| -535076408 -614868183 |
| -535266908 -614868183 0 1171 |
| -535353825 -614698667 |
| -536223000 -613003500 2971 -169 |
| -535886210 -614878501 |
| -535852531 -615066000 1001 1596 |
| -535886210 -615253499 |
| -536223000 -617128500 798 -169 |
| -535353825 -615433333 |
| -535266908 -615263817 2428 1171 |
| -535076408 -615263817 |
| ANP000019 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -619388817 |
| -535076408 -618993183 |
| -535266908 -618993183 0 1171 |
| -535353825 -618823667 |
| -536223000 -617128500 2971 -169 |
| -535886210 -619003501 |
| -535852531 -619191000 1001 1596 |
| -535886210 -619378499 |
| -536223000 -621253500 798 -169 |
| -535353825 -619558333 |
| -535266908 -619388817 2428 1171 |
| -535076408 -619388817 |
| ANP000020 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -623513817 |
| -535076408 -623118183 |
| -535266908 -623118183 0 1171 |
| -535353825 -622948667 |
| -536223000 -621253500 2971 -169 |
| -535886210 -623128501 |
| -535852531 -623316000 1001 1596 |
| -535886210 -623503499 |
| -536223000 -625378500 798 -169 |
| -535353825 -623683333 |
| -535266908 -623513817 2428 1171 |
| -535076408 -623513817 |
| ANP000021 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -627638817 |
| -535076408 -627243183 |
| -535266908 -627243183 0 1171 |
| -535353825 -627073667 |
| -536223000 -625378500 2971 -169 |
| -535886210 -627253501 |
| -535852531 -627441000 1001 1596 |
| -535886210 -627628499 |
| -536223000 -629503500 798 -169 |
| -535353825 -627808333 |
| -535266908 -627638817 2428 1171 |
| -535076408 -627638817 |
| ANP000022 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -631763817 |
| -535076408 -631368183 |
| -535266908 -631368183 0 1171 |
| -535353825 -631198667 |
| -536223000 -629503500 2971 -169 |
| -535886210 -631378501 |
| -535852531 -631566000 1001 1596 |
| -535886210 -631753499 |
| -536223000 -633628500 798 -169 |
| -535353825 -631933333 |
| -535266908 -631763817 2428 1171 |
| -535076408 -631763817 |
| ANP000024 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535476069 -639892283 |
| -535610773 -639757579 3150 1519 |
| -535666430 -639575391 |
| -536223000 -637753500 2869 -68 |
| -535886210 -639628501 |
| -535852531 -639816000 1001 1596 |
| -535886210 -640003499 |
| -536223000 -641878500 798 -42 |
| -535749353 -640033313 |
| -535701989 -639848795 2556 593 |
| -535567285 -639983499 |
| -535476069 -639892283 |
| ANP000030 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -604940999 |
| -540853469 -604753500 2801 1596 |
| -540819790 -604566001 |
| -540483000 -602691000 2598 -42 |
| -540956647 -604536187 |
| -541004011 -604720705 756 593 |
| -541138715 -604586001 |
| -541229931 -604677217 |
| -541095227 -604811921 1350 1519 |
| -541039570 -604994109 |
| -540483000 -606816000 1069 -68 |
| -540819790 -604940999 |
| ANP000031 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -609065999 |
| -540853469 -608878500 2801 1596 |
| -540819790 -608691001 |
| -540483000 -606816000 2598 -42 |
| -540956647 -608661187 |
| -541004011 -608845705 756 593 |
| -541138715 -608711001 |
| -541229931 -608802217 |
| -541095227 -608936921 1350 1519 |
| -541039570 -609119109 |
| -540483000 -610941000 1069 -68 |
| -540819790 -609065999 |
| ANP000032 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -613190999 |
| -540853469 -613003500 2801 1596 |
| -540819790 -612816001 |
| -540483000 -610941000 2598 -42 |
| -540956647 -612786187 |
| -541004011 -612970705 756 593 |
| -541138715 -612836001 |
| -541229931 -612927217 |
| -541095227 -613061921 1350 1519 |
| -541039570 -613244109 |
| -540483000 -615066000 1069 -68 |
| -540819790 -613190999 |
| ANP000033 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -617315999 |
| -540853469 -617128500 2801 1596 |
| -540819790 -616941001 |
| -540483000 -615066000 2598 -42 |
| -540956647 -616911187 |
| -541004011 -617095705 756 593 |
| -541138715 -616961001 |
| -541229931 -617052217 |
| -541095227 -617186921 1350 1519 |
| -541039570 -617369109 |
| -540483000 -619191000 1069 -68 |
| -540819790 -617315999 |
| ANP000034 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -621440999 |
| -540853469 -621253500 2801 1596 |
| -540819790 -621066001 |
| -540483000 -619191000 2598 -42 |
| -540956647 -621036187 |
| -541004011 -621220705 756 593 |
| -541138715 -621086001 |
| -541229931 -621177217 |
| -541095227 -621311921 1350 1519 |
| -541039570 -621494109 |
| -540483000 -623316000 1069 -68 |
| -540819790 -621440999 |
| ANP000035 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -625565999 |
| -540853469 -625378500 2801 1596 |
| -540819790 -625191001 |
| -540483000 -623316000 2598 -42 |
| -540956647 -625161187 |
| -541004011 -625345705 756 593 |
| -541138715 -625211001 |
| -541229931 -625302217 |
| -541095227 -625436921 1350 1519 |
| -541039570 -625619109 |
| -540483000 -627441000 1069 -68 |
| -540819790 -625565999 |
| ANP000036 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -629690999 |
| -540853469 -629503500 2801 1596 |
| -540819790 -629316001 |
| -540483000 -627441000 2598 -42 |
| -540956647 -629286187 |
| -541004011 -629470705 756 593 |
| -541138715 -629336001 |
| -541229931 -629427217 |
| -541095227 -629561921 1350 1519 |
| -541039570 -629744109 |
| -540483000 -631566000 1069 -68 |
| -540819790 -629690999 |
| ANP000037 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -642065999 |
| -540853469 -641878500 2801 1596 |
| -540819790 -641691001 |
| -540483000 -639816000 2598 -42 |
| -540956647 -641661187 |
| -541004011 -641845705 756 593 |
| -541138715 -641711001 |
| -541229931 -641802217 |
| -541095227 -641936921 1350 1519 |
| -541039570 -642119109 |
| -540483000 -643941000 1069 -68 |
| -540819790 -642065999 |
| ANP000078 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -605910825 |
| -664021841 -605820308 3316 1183 |
| -664021841 -605629808 |
| -664409372 -605629808 |
| -664409372 -605820308 900 593 |
| -664573338 -605723326 |
| -666213000 -604753500 3293 -492 |
| -665876210 -606628501 |
| -665842531 -606816000 1001 1596 |
| -665876210 -607003499 |
| -666213000 -608878500 798 -492 |
| -664573338 -607908674 |
| -664409372 -607811692 2106 593 |
| -664409372 -608002192 |
| -664021841 -608002192 |
| -664021841 -607811692 2700 1183 |
| -663854220 -607721175 |
| -662178000 -606816000 2083 -567 |
| -663854220 -605910825 |
| ANP000079 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -610035825 |
| -664021841 -609945308 3316 1183 |
| -664021841 -609754808 |
| -664409372 -609754808 |
| -664409372 -609945308 900 593 |
| -664573338 -609848326 |
| -666213000 -608878500 3293 -492 |
| -665876210 -610753501 |
| -665842531 -610941000 1001 1596 |
| -665876210 -611128499 |
| -666213000 -613003500 798 -492 |
| -664573338 -612033674 |
| -664409372 -611936692 2106 593 |
| -664409372 -612127192 |
| -664021841 -612127192 |
| -664021841 -611936692 2700 1183 |
| -663854220 -611846175 |
| -662178000 -610941000 2083 -567 |
| -663854220 -610035825 |
| ANP000080 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -614160825 |
| -664021841 -614070308 3316 1183 |
| -664021841 -613879808 |
| -664409372 -613879808 |
| -664409372 -614070308 900 593 |
| -664573338 -613973326 |
| -666213000 -613003500 3293 -492 |
| -665876210 -614878501 |
| -665842531 -615066000 1001 1596 |
| -665876210 -615253499 |
| -666213000 -617128500 798 -492 |
| -664573338 -616158674 |
| -664409372 -616061692 2106 593 |
| -664409372 -616252192 |
| -664021841 -616252192 |
| -664021841 -616061692 2700 1183 |
| -663854220 -615971175 |
| -662178000 -615066000 2083 -567 |
| -663854220 -614160825 |
| ANP000081 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -618285825 |
| -664021841 -618195308 3316 1183 |
| -664021841 -618004808 |
| -664409372 -618004808 |
| -664409372 -618195308 900 593 |
| -664573338 -618098326 |
| -666213000 -617128500 3293 -492 |
| -665876210 -619003501 |
| -665842531 -619191000 1001 1596 |
| -665876210 -619378499 |
| -666213000 -621253500 798 -492 |
| -664573338 -620283674 |
| -664409372 -620186692 2106 593 |
| -664409372 -620377192 |
| -664021841 -620377192 |
| -664021841 -620186692 2700 1183 |
| -663854220 -620096175 |
| -662178000 -619191000 2083 -567 |
| -663854220 -618285825 |
| ANP000082 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -622410825 |
| -664021841 -622320308 3316 1183 |
| -664021841 -622129808 |
| -664409372 -622129808 |
| -664409372 -622320308 900 593 |
| -664573338 -622223326 |
| -666213000 -621253500 3293 -492 |
| -665876210 -623128501 |
| -665842531 -623316000 1001 1596 |
| -665876210 -623503499 |
| -666213000 -625378500 798 -492 |
| -664573338 -624408674 |
| -664409372 -624311692 2106 593 |
| -664409372 -624502192 |
| -664021841 -624502192 |
| -664021841 -624311692 2700 1183 |
| -663854220 -624221175 |
| -662178000 -623316000 2083 -567 |
| -663854220 -622410825 |
| ANP000083 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -626535825 |
| -664021841 -626445308 3316 1183 |
| -664021841 -626254808 |
| -664409372 -626254808 |
| -664409372 -626445308 900 593 |
| -664573338 -626348326 |
| -666213000 -625378500 3293 -492 |
| -665876210 -627253501 |
| -665842531 -627441000 1001 1596 |
| -665876210 -627628499 |
| -666213000 -629503500 798 -492 |
| -664573338 -628533674 |
| -664409372 -628436692 2106 593 |
| -664409372 -628627192 |
| -664021841 -628627192 |
| -664021841 -628436692 2700 1183 |
| -663854220 -628346175 |
| -662178000 -627441000 2083 -567 |
| -663854220 -626535825 |
| ANP000084 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -630660825 |
| -664021841 -630570308 3316 1183 |
| -664021841 -630379808 |
| -664409372 -630379808 |
| -664409372 -630570308 900 593 |
| -664573338 -630473326 |
| -666213000 -629503500 3293 -492 |
| -665876210 -631378501 |
| -665842531 -631566000 1001 1596 |
| -665876210 -631753499 |
| -666213000 -633628500 798 -492 |
| -664573338 -632658674 |
| -664409372 -632561692 2106 593 |
| -664409372 -632752192 |
| -664021841 -632752192 |
| -664021841 -632561692 2700 1183 |
| -663854220 -632471175 |
| -662178000 -631566000 2083 -567 |
| -663854220 -630660825 |
| ANP000085 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -634785825 |
| -664021841 -634695308 3316 1183 |
| -664021841 -634504808 |
| -664409372 -634504808 |
| -664409372 -634695308 900 593 |
| -664573338 -634598326 |
| -666213000 -633628500 3293 -492 |
| -665876210 -635503501 |
| -665842531 -635691000 1001 1596 |
| -665876210 -635878499 |
| -666213000 -637753500 798 -492 |
| -664573338 -636783674 |
| -664409372 -636686692 2106 593 |
| -664409372 -636877192 |
| -664021841 -636877192 |
| -664021841 -636686692 2700 1183 |
| -663854220 -636596175 |
| -662178000 -635691000 2083 -567 |
| -663854220 -634785825 |
| ANP000086 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -638910825 |
| -664021841 -638820308 3316 1183 |
| -664021841 -638629808 |
| -664409372 -638629808 |
| -664409372 -638820308 900 593 |
| -664573338 -638723326 |
| -666213000 -637753500 3293 -492 |
| -665876210 -639628501 |
| -665842531 -639816000 1001 1596 |
| -665876210 -640003499 |
| -666213000 -641878500 798 -492 |
| -664573338 -640908674 |
| -664409372 -640811692 2106 593 |
| -664409372 -641002192 |
| -664021841 -641002192 |
| -664021841 -640811692 2700 1183 |
| -663854220 -640721175 |
| -662178000 -639816000 2083 -567 |
| -663854220 -638910825 |
| ANP000087 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -643035825 |
| -664021841 -642945308 3316 1183 |
| -664021841 -642754808 |
| -664409372 -642754808 |
| -664409372 -642945308 900 593 |
| -664573338 -642848326 |
| -666213000 -641878500 3293 -492 |
| -665876210 -643753501 |
| -665842531 -643941000 1001 1596 |
| -665876210 -644128499 |
| -666213000 -646003500 798 -492 |
| -664573338 -645033674 |
| -664409372 -644936692 2106 593 |
| -664409372 -645127192 |
| -664021841 -645127192 |
| -664021841 -644936692 2700 1183 |
| -663854220 -644846175 |
| -662178000 -643941000 2083 -567 |
| -663854220 -643035825 |
| ANP000088 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 569 432 381000 1 |
| -525208500 -676656000 |
| -525208500 -569976000 |
| -525399000 -569976000 0 900 |
| -525399000 -569785500 |
| -676656000 -569785500 |
| -676656000 -569976000 900 900 |
| -676846500 -569976000 |
| -676846500 -676656000 |
| -676656000 -676656000 1800 900 |
| -676656000 -676846500 |
| -638083494 -676846500 |
| -638083494 -676656000 2700 1350 |
| -637948790 -676521296 |
| -651093282 -663376804 |
| -651227986 -663511508 450 450 |
| -651227986 -663321008 |
| -652767300 -663321008 |
| -652767300 -662749500 2700 -900 |
| -653338808 -662749500 |
| -653338808 -660463500 |
| -652767300 -660463500 1800 -900 |
| -652767300 -659891992 |
| -650481300 -659891992 |
| -650481300 -660463500 900 -900 |
| -649909792 -660463500 |
| -649909792 -661598692 |
| -649719292 -661598692 1800 23 |
| -649909632 -661606500 |
| -649719292 -661614308 1776 23 |
| -649909792 -661614308 |
| -649909792 -662002814 |
| -649719292 -662002814 1800 450 |
| -649853996 -662137518 |
| -649800032 -662191482 |
| -649665328 -662056778 2250 1486 |
| -649480226 -662011750 |
| -647814300 -661606500 1936 -134 |
| -649528794 -661613527 |
| -649719292 -661614308 2 21 |
| -649528952 -661606500 |
| -649719292 -661598692 3576 21 |
| -649528794 -661599473 |
| -647814300 -661606500 1797 -1795 |
| -646099799 -661601531 |
| -645909300 -661600979 1801 14 |
| -646099720 -661606500 |
| -645909300 -661612021 1783 14 |
| -646099799 -661611469 |
| -647814300 -661606500 3598 -107 |
| -646130974 -661932000 |
| -645943939 -661968167 1690 559 |
| -646078643 -662102871 |
| -645990032 -662191482 |
| -645855328 -662056778 2250 1486 |
| -645670226 -662011750 |
| -644004300 -661606500 1936 -135 |
| -645718801 -661611469 |
| -645909300 -661612021 1 14 |
| -645718880 -661606500 |
| -645909300 -661600979 3583 14 |
| -645718801 -661601531 |
| -644004300 -661606500 1798 -1796 |
| -642289799 -661601531 |
| -642099300 -661600979 1801 14 |
| -642289720 -661606500 |
| -642099300 -661612021 1783 14 |
| -642289799 -661611469 |
| -644004300 -661606500 3598 -107 |
| -642320974 -661932000 |
| -642133939 -661968167 1690 559 |
| -642268643 -662102871 |
| -642180032 -662191482 |
| -642045328 -662056778 2250 1486 |
| -641860226 -662011750 |
| -640194300 -661606500 1936 -135 |
| -641908801 -661611469 |
| -642099300 -661612021 1 14 |
| -641908880 -661606500 |
| -642099300 -661600979 3583 14 |
| -641908801 -661601531 |
| -640194300 -661606500 1798 -1796 |
| -638479799 -661601531 |
| -638289300 -661600979 1801 14 |
| -638479720 -661606500 |
| -638289300 -661612021 1783 14 |
| -638479799 -661611469 |
| -640194300 -661606500 3598 -107 |
| -638510974 -661932000 |
| -638323939 -661968167 1690 559 |
| -638458643 -662102871 |
| -638370032 -662191482 |
| -638235328 -662056778 2250 1486 |
| -638050226 -662011750 |
| -636384300 -661606500 1936 -135 |
| -638098801 -661611469 |
| -638289300 -661612021 1 14 |
| -638098880 -661606500 |
| -638289300 -661600979 3583 14 |
| -638098801 -661601531 |
| -636384300 -661606500 1798 -1796 |
| -634669799 -661601531 |
| -634479300 -661600979 1801 14 |
| -634669720 -661606500 |
| -634479300 -661612021 1783 14 |
| -634669799 -661611469 |
| -636384300 -661606500 3598 -107 |
| -634700974 -661932000 |
| -634513939 -661968167 1690 559 |
| -634648643 -662102871 |
| -634560032 -662191482 |
| -634425328 -662056778 2250 1486 |
| -634240226 -662011750 |
| -632574300 -661606500 1936 -135 |
| -634288801 -661611469 |
| -634479300 -661612021 1 14 |
| -634288880 -661606500 |
| -634479300 -661600979 3583 14 |
| -634288801 -661601531 |
| -632574300 -661606500 1798 -1796 |
| -630859799 -661601531 |
| -630669300 -661600979 1801 14 |
| -630859720 -661606500 |
| -630669300 -661612021 1783 14 |
| -630859799 -661611469 |
| -632574300 -661606500 3598 -107 |
| -630890974 -661932000 |
| -630703939 -661968167 1690 559 |
| -630838643 -662102871 |
| -630750032 -662191482 |
| -630615328 -662056778 2250 1486 |
| -630430226 -662011750 |
| -628764300 -661606500 1936 -135 |
| -630478801 -661611469 |
| -630669300 -661612021 1 14 |
| -630478880 -661606500 |
| -630669300 -661600979 3583 14 |
| -630478801 -661601531 |
| -628764300 -661606500 1798 -1796 |
| -627049799 -661601531 |
| -626859300 -661600979 1801 14 |
| -627049720 -661606500 |
| -626859300 -661612021 1783 14 |
| -627049799 -661611469 |
| -628764300 -661606500 3598 -107 |
| -627080974 -661932000 |
| -626893939 -661968167 1690 559 |
| -627028643 -662102871 |
| -626940032 -662191482 |
| -626805328 -662056778 2250 1486 |
| -626620226 -662011750 |
| -624954300 -661606500 1936 -135 |
| -626668801 -661611469 |
| -626859300 -661612021 1 14 |
| -626668880 -661606500 |
| -626859300 -661600979 3583 14 |
| -626668801 -661601531 |
| -624954300 -661606500 1798 -2835 |
| -625359550 -663272426 |
| -625404578 -663457528 763 1486 |
| -625539282 -663592232 |
| -619960818 -669170696 |
| -619826114 -669035992 2250 450 |
| -619826114 -669226492 |
| -612404102 -669226492 |
| -612404102 -669035992 2700 1350 |
| -612269398 -668901288 |
| -618060582 -663110104 |
| -618195286 -663244808 450 450 |
| -618195286 -663054308 |
| -619734600 -663054308 |
| -619734600 -662482800 2700 -900 |
| -620306108 -662482800 |
| -620306108 -660196800 |
| -619734600 -660196800 1800 -900 |
| -619734600 -659625292 |
| -617448600 -659625292 |
| -617448600 -660196800 900 -900 |
| -616877092 -660196800 |
| -616877092 -661331992 |
| -616686592 -661331992 1800 23 |
| -616876932 -661339800 |
| -616686592 -661347608 1776 23 |
| -616877092 -661347608 |
| -616877092 -661736114 |
| -616686592 -661736114 1800 450 |
| -616821296 -661870818 |
| -616767332 -661924782 |
| -616632628 -661790078 2250 1486 |
| -616447526 -661745050 |
| -614781600 -661339800 1936 -134 |
| -616496094 -661346827 |
| -616686592 -661347608 2 21 |
| -616496252 -661339800 |
| -616686592 -661331992 3576 21 |
| -616496094 -661332773 |
| -614781600 -661339800 1797 -1795 |
| -613067099 -661334831 |
| -612876600 -661334279 1801 14 |
| -613067020 -661339800 |
| -612876600 -661345321 1783 14 |
| -613067099 -661344769 |
| -614781600 -661339800 3598 -107 |
| -613098274 -661665300 |
| -612911239 -661701467 1690 559 |
| -613045943 -661836171 |
| -612957332 -661924782 |
| -612822628 -661790078 2250 1486 |
| -612637526 -661745050 |
| -610971600 -661339800 1936 -135 |
| -612686101 -661344769 |
| -612876600 -661345321 1 14 |
| -612686180 -661339800 |
| -612876600 -661334279 3583 14 |
| -612686101 -661334831 |
| -610971600 -661339800 1798 -1796 |
| -609257099 -661334831 |
| -609066600 -661334279 1801 14 |
| -609257020 -661339800 |
| -609066600 -661345321 1783 14 |
| -609257099 -661344769 |
| -610971600 -661339800 3598 -107 |
| -609288274 -661665300 |
| -609101239 -661701467 1690 559 |
| -609235943 -661836171 |
| -609147332 -661924782 |
| -609012628 -661790078 2250 1486 |
| -608827526 -661745050 |
| -607161600 -661339800 1936 -135 |
| -608876101 -661344769 |
| -609066600 -661345321 1 14 |
| -608876180 -661339800 |
| -609066600 -661334279 3583 14 |
| -608876101 -661334831 |
| -607161600 -661339800 1798 -1796 |
| -605447099 -661334831 |
| -605256600 -661334279 1801 14 |
| -605447020 -661339800 |
| -605256600 -661345321 1783 14 |
| -605447099 -661344769 |
| -607161600 -661339800 3598 -107 |
| -605478274 -661665300 |
| -605291239 -661701467 1690 559 |
| -605425943 -661836171 |
| -605337332 -661924782 |
| -605202628 -661790078 2250 1486 |
| -605017526 -661745050 |
| -603351600 -661339800 1936 -135 |
| -605066101 -661344769 |
| -605256600 -661345321 1 14 |
| -605066180 -661339800 |
| -605256600 -661334279 3583 14 |
| -605066101 -661334831 |
| -603351600 -661339800 1798 -1796 |
| -601637099 -661334831 |
| -601446600 -661334279 1801 14 |
| -601637020 -661339800 |
| -601446600 -661345321 1783 14 |
| -601637099 -661344769 |
| -603351600 -661339800 3598 -107 |
| -601668274 -661665300 |
| -601481239 -661701467 1690 559 |
| -601615943 -661836171 |
| -601527332 -661924782 |
| -601392628 -661790078 2250 1486 |
| -601207526 -661745050 |
| -599541600 -661339800 1936 -135 |
| -601256101 -661344769 |
| -601446600 -661345321 1 14 |
| -601256180 -661339800 |
| -601446600 -661334279 3583 14 |
| -601256101 -661334831 |
| -599541600 -661339800 1798 -1796 |
| -597827099 -661334831 |
| -597636600 -661334279 1801 14 |
| -597827020 -661339800 |
| -597636600 -661345321 1783 14 |
| -597827099 -661344769 |
| -599541600 -661339800 3598 -107 |
| -597858274 -661665300 |
| -597671239 -661701467 1690 559 |
| -597805943 -661836171 |
| -597717332 -661924782 |
| -597582628 -661790078 2250 1486 |
| -597397526 -661745050 |
| -595731600 -661339800 1936 -135 |
| -597446101 -661344769 |
| -597636600 -661345321 1 14 |
| -597446180 -661339800 |
| -597636600 -661334279 3583 14 |
| -597446101 -661334831 |
| -595731600 -661339800 1798 -1796 |
| -594017099 -661334831 |
| -593826600 -661334279 1801 14 |
| -594017020 -661339800 |
| -593826600 -661345321 1783 14 |
| -594017099 -661344769 |
| -595731600 -661339800 3598 -107 |
| -594048274 -661665300 |
| -593861239 -661701467 1690 559 |
| -593995943 -661836171 |
| -593907332 -661924782 |
| -593772628 -661790078 2250 1486 |
| -593587526 -661745050 |
| -591921600 -661339800 1936 -135 |
| -593636101 -661344769 |
| -593826600 -661345321 1 14 |
| -593636180 -661339800 |
| -593826600 -661334279 3583 14 |
| -593636101 -661334831 |
| -591921600 -661339800 1798 -2034 |
| -590350223 -662025593 |
| -590175626 -662101792 1564 1135 |
| -590175626 -662292292 |
| -583795471 -662292292 |
| -583795471 -662101792 2700 450 |
| -583660767 -662236496 |
| -581090775 -659666504 |
| -581225479 -659531800 3150 1135 |
| -581155901 -659354461 |
| -580529700 -657758400 2485 -2271 |
| -578933639 -657132199 |
| -578756300 -657062621 2014 1135 |
| -578621596 -657197325 |
| -573194104 -651769833 |
| -573328808 -651635129 3150 450 |
| -573138308 -651635129 |
| -573138308 -644589898 |
| -573328808 -644589898 0 538 |
| -573216513 -644436015 |
| -572262000 -643128000 2338 -2877 |
| -571307487 -644436015 |
| -571195192 -644589898 1261 538 |
| -571385692 -644589898 |
| -571385692 -650902433 |
| -571195192 -650902433 1800 1350 |
| -571060488 -651037137 |
| -570590824 -650567473 |
| -570725528 -650432769 3150 450 |
| -570535028 -650432769 |
| -570535028 -645096720 |
| -569658720 -645096720 1800 -450 |
| -570278363 -644477077 |
| -568581361 -642780075 |
| -568716065 -642645371 3150 538 |
| -568527848 -642615964 |
| -566928000 -642366000 1888 -2877 |
| -567177964 -643965848 |
| -567207371 -644154065 811 538 |
| -567342075 -644019361 |
| -568726616 -645403902 |
| -568591912 -645538606 1350 450 |
| -568782412 -645538606 |
| -568782412 -649700073 |
| -568591912 -649700073 1800 1350 |
| -568457208 -649834777 |
| -548465404 -629842973 |
| -548600108 -629708269 3150 450 |
| -548409608 -629708269 |
| -548409608 -622116300 |
| -547533300 -622116300 1800 -450 |
| -548152943 -621496657 |
| -542378001 -615721715 |
| -542512705 -615587011 3150 593 |
| -542328187 -615539647 |
| -540483000 -615066000 1943 -313 |
| -542304891 -614509430 |
| -542487079 -614453773 3430 1519 |
| -542621783 -614319069 |
| -545574296 -617271582 |
| -545439592 -617406286 1350 450 |
| -545630092 -617406286 |
| -545630092 -617943900 |
| -546506400 -617943900 0 -450 |
| -545886757 -618563543 |
| -550676243 -623353029 |
| -550541539 -623487733 1350 559 |
| -550728574 -623523900 |
| -552411900 -623849400 109 -1007 |
| -552406931 -625563901 |
| -552406379 -625754400 901 14 |
| -552411900 -625563980 |
| -552417421 -625754400 883 14 |
| -552416869 -625563901 |
| -552411900 -623849400 2698 -1796 |
| -552416869 -622134899 |
| -552417421 -621944400 2701 14 |
| -552411900 -622134820 |
| -552406379 -621944400 2683 14 |
| -552406931 -622134899 |
| -552411900 -623849400 898 -107 |
| -552086400 -622166074 |
| -552050233 -621979039 2590 559 |
| -551915529 -622113743 |
| -551826918 -622025132 |
| -551961622 -621890428 3150 1486 |
| -552006650 -621705326 |
| -552411900 -620039400 2836 -135 |
| -552406931 -621753901 |
| -552406379 -621944400 901 14 |
| -552411900 -621753980 |
| -552417421 -621944400 883 14 |
| -552416869 -621753901 |
| -552411900 -620039400 2698 -1796 |
| -552416869 -618324899 |
| -552417421 -618134400 2701 14 |
| -552411900 -618324820 |
| -552406379 -618134400 2683 14 |
| -552406931 -618324899 |
| -552411900 -620039400 898 -1035 |
| -550745974 -620444650 |
| -550560872 -620489678 1663 1486 |
| -550426168 -620624382 |
| -547438504 -617636718 |
| -547573208 -617502014 3150 450 |
| -547382708 -617502014 |
| -547382708 -616964400 |
| -546506400 -616964400 1800 -450 |
| -547126043 -616344757 |
| -542378001 -611596715 |
| -542512705 -611462011 3150 593 |
| -542328187 -611414647 |
| -540483000 -610941000 1943 -505 |
| -542021468 -609817535 |
| -542175314 -609705189 3238 1336 |
| -542200168 -609516317 |
| -542314500 -608647500 2774 -74 |
| -542314500 -609523808 |
| -544388114 -609523808 |
| -544388114 -609714308 900 450 |
| -544522818 -609579604 |
| -550676243 -615733029 |
| -550541539 -615867733 1350 559 |
| -550728574 -615903900 |
| -552411900 -616229400 109 -1007 |
| -552406931 -617943901 |
| -552406379 -618134400 901 14 |
| -552411900 -617943980 |
| -552417421 -618134400 883 14 |
| -552416869 -617943901 |
| -552411900 -616229400 2698 -1796 |
| -552416869 -614514899 |
| -552417421 -614324400 2701 14 |
| -552411900 -614514820 |
| -552406379 -614324400 2683 14 |
| -552406931 -614514899 |
| -552411900 -616229400 898 -107 |
| -552086400 -614546074 |
| -552050233 -614359039 2590 559 |
| -551915529 -614493743 |
| -551826918 -614405132 |
| -551961622 -614270428 3150 1486 |
| -552006650 -614085326 |
| -552411900 -612419400 2836 -135 |
| -552406931 -614133901 |
| -552406379 -614324400 901 14 |
| -552411900 -614133980 |
| -552417421 -614324400 883 14 |
| -552416869 -614133901 |
| -552411900 -612419400 2698 -1796 |
| -552416869 -610704899 |
| -552417421 -610514400 2701 14 |
| -552411900 -610704820 |
| -552406379 -610514400 2683 14 |
| -552406931 -610704899 |
| -552411900 -612419400 898 -1035 |
| -550745974 -612824650 |
| -550560872 -612869678 1663 1486 |
| -550426168 -613004382 |
| -545449643 -608027857 |
| -544830000 -608647500 1350 -450 |
| -544830000 -607771192 |
| -542756386 -607771192 |
| -542756386 -607580692 2700 450 |
| -542621682 -607715396 |
| -542378001 -607471715 |
| -542512705 -607337011 3150 593 |
| -542328187 -607289647 |
| -540483000 -606816000 1943 -313 |
| -542304891 -606259430 |
| -542487079 -606203773 3430 1519 |
| -542621783 -606069069 |
| -542886157 -606333443 |
| -543505800 -605713800 3150 -450 |
| -543505800 -606590108 |
| -549074414 -606590108 |
| -549074414 -606780608 900 450 |
| -549209118 -606645904 |
| -550676243 -608113029 |
| -550541539 -608247733 1350 559 |
| -550728574 -608283900 |
| -552411900 -608609400 109 -1007 |
| -552406931 -610323901 |
| -552406379 -610514400 901 14 |
| -552411900 -610323980 |
| -552417421 -610514400 883 14 |
| -552416869 -610323901 |
| -552411900 -608609400 2698 -1796 |
| -552416869 -606894899 |
| -552417421 -606704400 2701 14 |
| -552411900 -606894820 |
| -552406379 -606704400 2683 14 |
| -552406931 -606894899 |
| -552411900 -608609400 898 -107 |
| -552086400 -606926074 |
| -552050233 -606739039 2590 559 |
| -551915529 -606873743 |
| -551826918 -606785132 |
| -551961622 -606650428 3150 1486 |
| -552006650 -606465326 |
| -552411900 -604799400 2836 -135 |
| -552406931 -606513901 |
| -552406379 -606704400 901 14 |
| -552411900 -606513980 |
| -552417421 -606704400 883 14 |
| -552416869 -606513901 |
| -552411900 -604799400 2698 -1796 |
| -552416869 -603084899 |
| -552417421 -602894400 2701 14 |
| -552411900 -603084820 |
| -552406379 -602894400 2683 14 |
| -552406931 -603084899 |
| -552411900 -604799400 898 -1035 |
| -550745974 -605204650 |
| -550560872 -605249678 1663 1486 |
| -550426168 -605384382 |
| -550135943 -605094157 |
| -549516300 -605713800 1350 -450 |
| -549516300 -604837492 |
| -543947686 -604837492 |
| -543947686 -604646992 2700 450 |
| -543812982 -604781696 |
| -542378001 -603346715 |
| -542512705 -603212011 3150 593 |
| -542328187 -603164647 |
| -540483000 -602691000 1943 -942 |
| -540819790 -600815999 |
| -540853469 -600628500 2801 1596 |
| -540819790 -600441001 |
| -540483000 -598566000 2598 -492 |
| -542122662 -599535826 |
| -542286628 -599632808 306 593 |
| -542286628 -599442308 |
| -544898414 -599442308 |
| -544898414 -599632808 900 450 |
| -545033118 -599498104 |
| -547144057 -601609043 |
| -547763700 -600989400 3150 -450 |
| -547763700 -601865708 |
| -550833617 -601865708 |
| -550833617 -602056208 900 559 |
| -550991445 -601949528 |
| -552411900 -600989400 3259 -557 |
| -552406931 -602703901 |
| -552406379 -602894400 901 14 |
| -552411900 -602703980 |
| -552417421 -602894400 883 14 |
| -552416869 -602703901 |
| -552411900 -600989400 2698 -2357 |
| -550991445 -600029272 |
| -550833617 -599922592 2140 559 |
| -550833617 -600113092 |
| -548205586 -600113092 |
| -548205586 -599922592 2700 450 |
| -548070882 -600057296 |
| -545959943 -597946357 |
| -545340300 -598566000 1350 -450 |
| -545340300 -597689692 |
| -542286628 -597689692 |
| -542286628 -597499192 2700 593 |
| -542122662 -597596174 |
| -540483000 -598566000 1493 -2292 |
| -540146210 -600441001 |
| -540112531 -600628500 1001 1596 |
| -540146210 -600815999 |
| -540483000 -602691000 798 -1596 |
| -540146210 -604566001 |
| -540112531 -604753500 1001 1596 |
| -540146210 -604940999 |
| -540483000 -606816000 798 -1596 |
| -540146210 -608691001 |
| -540112531 -608878500 1001 1596 |
| -540146210 -609065999 |
| -540483000 -610941000 798 -1596 |
| -540146210 -612816001 |
| -540112531 -613003500 1001 1596 |
| -540146210 -613190999 |
| -540483000 -615066000 798 -1596 |
| -540146210 -616941001 |
| -540112531 -617128500 1001 1596 |
| -540146210 -617315999 |
| -540483000 -619191000 798 -1596 |
| -540146210 -621066001 |
| -540112531 -621253500 1001 1596 |
| -540146210 -621440999 |
| -540483000 -623316000 798 -1596 |
| -540146210 -625191001 |
| -540112531 -625378500 1001 1596 |
| -540146210 -625565999 |
| -540483000 -627441000 798 -1596 |
| -540146210 -629316001 |
| -540112531 -629503500 1001 1596 |
| -540146210 -629690999 |
| -540483000 -631566000 798 -1081 |
| -538806780 -632471175 |
| -538639159 -632561692 1516 1183 |
| -538639159 -632752192 |
| -538026628 -632752192 |
| -538026628 -632561692 2700 593 |
| -537862662 -632658674 |
| -536223000 -633628500 1493 -492 |
| -536559790 -631753499 |
| -536593469 -631566000 2801 1596 |
| -536559790 -631378501 |
| -536223000 -629503500 2598 -1596 |
| -536559790 -627628499 |
| -536593469 -627441000 2801 1596 |
| -536559790 -627253501 |
| -536223000 -625378500 2598 -1596 |
| -536559790 -623503499 |
| -536593469 -623316000 2801 1596 |
| -536559790 -623128501 |
| -536223000 -621253500 2598 -1596 |
| -536559790 -619378499 |
| -536593469 -619191000 2801 1596 |
| -536559790 -619003501 |
| -536223000 -617128500 2598 -1596 |
| -536559790 -615253499 |
| -536593469 -615066000 2801 1596 |
| -536559790 -614878501 |
| -536223000 -613003500 2598 -1596 |
| -536559790 -611128499 |
| -536593469 -610941000 2801 1596 |
| -536559790 -610753501 |
| -536223000 -608878500 2598 -1596 |
| -536559790 -607003499 |
| -536593469 -606816000 2801 1596 |
| -536559790 -606628501 |
| -536223000 -604753500 2598 -1596 |
| -536559790 -602878499 |
| -536593469 -602691000 2801 1596 |
| -536559790 -602503501 |
| -536223000 -600628500 2598 -1969 |
| -535353825 -598933333 |
| -535266908 -598763817 2428 1171 |
| -535076408 -598763817 |
| -535076408 -591041421 |
| -535266908 -591041421 0 1382 |
| -535409124 -590914674 |
| -538353000 -588291000 3182 -2296 |
| -538256965 -584348811 |
| -538252326 -584158368 2686 1363 |
| -538117622 -584023664 |
| -544679982 -577461304 |
| -544814686 -577596008 450 450 |
| -544814686 -577405508 |
| -555878992 -577405508 |
| -555878992 -577596008 900 900 |
| -556069492 -577596008 |
| -556069492 -579501000 |
| -556641000 -579501000 0 -900 |
| -556641000 -580072508 |
| -558927000 -580072508 |
| -558927000 -579501000 2700 -900 |
| -559498508 -579501000 |
| -559498508 -579424808 |
| -559689008 -579424808 0 900 |
| -559689008 -579234308 |
| -561228314 -579234308 |
| -561228314 -579424808 900 450 |
| -561363018 -579290104 |
| -564784357 -582711443 |
| -565404000 -582091800 3150 -450 |
| -565404000 -582968108 |
| -573862200 -582968108 |
| -573862200 -582091800 2700 -450 |
| -574481843 -582711443 |
| -575194629 -581998657 |
| -575329333 -582133361 450 559 |
| -575365500 -581946326 |
| -575691000 -580263000 2809 -218 |
| -576016500 -581946326 |
| -576052667 -582133361 790 559 |
| -576187371 -581998657 |
| -576900157 -582711443 |
| -577519800 -582091800 3150 -450 |
| -577519800 -582968108 |
| -581482200 -582968108 |
| -581482200 -582091800 2700 -450 |
| -582101843 -582711443 |
| -582814629 -581998657 |
| -582949333 -582133361 450 559 |
| -582985500 -581946326 |
| -583311000 -580263000 2809 -218 |
| -583636500 -581946326 |
| -583672667 -582133361 790 559 |
| -583807371 -581998657 |
| -584520157 -582711443 |
| -585139800 -582091800 3150 -450 |
| -585139800 -582968108 |
| -589102200 -582968108 |
| -589102200 -582091800 2700 -450 |
| -589721843 -582711443 |
| -590434629 -581998657 |
| -590569333 -582133361 450 559 |
| -590605500 -581946326 |
| -590931000 -580263000 2809 -1007 |
| -592645501 -580267969 |
| -592836000 -580268521 1 14 |
| -592645580 -580263000 |
| -592836000 -580257479 3583 14 |
| -592645501 -580258031 |
| -590931000 -580263000 1798 -484 |
| -592065523 -578977544 |
| -592191580 -578834716 3114 935 |
| -592056876 -578700012 |
| -592381184 -578375704 |
| -592515888 -578510408 450 450 |
| -592515888 -578319908 |
| -593994356 -578319908 |
| -593994356 -578510408 900 1569 |
| -594069020 -578685666 |
| -594741000 -580263000 669 -667 |
| -593026499 -580258031 |
| -592836000 -580257479 1801 14 |
| -593026420 -580263000 |
| -592836000 -580268521 1783 14 |
| -593026499 -580267969 |
| -594741000 -580263000 3598 -957 |
| -594917159 -581968434 |
| -594936732 -582157926 841 508 |
| -595071436 -582023222 |
| -598655257 -585607043 |
| -599274900 -584987400 3150 -450 |
| -599274900 -585863708 |
| -604395614 -585863708 |
| -604395614 -586054208 900 450 |
| -604530318 -585919504 |
| -606465757 -587854943 |
| -607085400 -587235300 3150 -450 |
| -607085400 -588111608 |
| -615696000 -588111608 |
| -615696000 -587235300 2700 -450 |
| -616315643 -587854943 |
| -623200482 -580970104 |
| -623335186 -581104808 450 450 |
| -623335186 -580914308 |
| -624087872 -580914308 |
| -624087872 -581104808 900 593 |
| -624251838 -581007826 |
| -625891500 -580038000 3293 -1392 |
| -627766501 -580374790 |
| -627954000 -580408469 101 1596 |
| -628141499 -580374790 |
| -630016500 -580038000 3498 -1596 |
| -631891501 -580374790 |
| -632079000 -580408469 101 1596 |
| -632266499 -580374790 |
| -634141500 -580038000 3498 -492 |
| -633171674 -581677662 |
| -633074692 -581841628 1206 593 |
| -633265192 -581841628 |
| -633265192 -582454159 |
| -633074692 -582454159 1800 1183 |
| -632984175 -582621780 |
| -632079000 -584298000 1183 -1081 |
| -630203999 -583961210 |
| -630016500 -583927531 1901 1596 |
| -629829001 -583961210 |
| -627954000 -584298000 1698 -1596 |
| -626078999 -583961210 |
| -625891500 -583927531 1901 1596 |
| -625704001 -583961210 |
| -623829000 -584298000 1698 -2768 |
| -624385570 -586119891 |
| -624441227 -586302079 730 1519 |
| -624575931 -586436783 |
| -624342829 -586669885 |
| -624962472 -587289528 450 -198 |
| -624168977 -586917665 |
| -623996480 -586836826 2051 198 |
| -624131184 -586971530 |
| -622587075 -588515639 |
| -622452371 -588380935 2250 538 |
| -622422964 -588569152 |
| -622173000 -590169000 988 -1500 |
| -621157564 -591430304 |
| -621038102 -591578692 1288 1411 |
| -621038102 -591769192 |
| -605844283 -591769192 |
| -605844283 -591578692 2700 559 |
| -605686455 -591685372 |
| -604266000 -592645500 1459 -2918 |
| -605686455 -593605628 |
| -605844283 -593712308 340 559 |
| -605844283 -593521808 |
| -623731500 -593521808 |
| -623731500 -592645500 2700 -450 |
| -624351143 -593265143 |
| -631423285 -586193001 |
| -631557989 -586327705 450 593 |
| -631605353 -586143187 |
| -632079000 -584298000 2843 -427 |
| -632984175 -585974220 |
| -633074692 -586141841 616 1183 |
| -633265192 -586141841 |
| -633265192 -587283614 |
| -633074692 -587283614 1800 450 |
| -633209396 -587418318 |
| -630588075 -590039639 |
| -630453371 -589904935 2250 538 |
| -630423964 -590093152 |
| -630174000 -591693000 988 -2877 |
| -631773848 -591443036 |
| -631962065 -591413629 3511 538 |
| -631827361 -591278925 |
| -634761143 -588345143 |
| -634141500 -587725500 2250 -270 |
| -634974931 -587996256 |
| -635156110 -588055115 179 1511 |
| -635343232 -588019398 |
| -636204000 -587855100 3491 -341 |
| -635584357 -588474743 |
| -635718896 -588609282 |
| -635584192 -588743986 1350 450 |
| -635774692 -588743986 |
| -635774692 -590114717 |
| -635584192 -590114717 1800 559 |
| -635690872 -590272545 |
| -636651000 -591693000 559 -2357 |
| -638365494 -591700027 |
| -638555992 -591700808 2 21 |
| -638365652 -591693000 |
| -638555992 -591685192 3576 21 |
| -638365494 -591685973 |
| -636651000 -591693000 1797 -557 |
| -637611128 -590272545 |
| -637717808 -590114717 3040 559 |
| -637527308 -590114717 |
| -637527308 -588302100 |
| -636651000 -588302100 1800 -450 |
| -637270643 -587682457 |
| -637136104 -587547918 |
| -637270808 -587413214 3150 450 |
| -637080308 -587413214 |
| -637080308 -586101628 |
| -637270808 -586101628 0 593 |
| -637173826 -585937662 |
| -636204000 -584298000 2393 -492 |
| -638079001 -584634790 |
| -638266500 -584668469 101 1596 |
| -638453999 -584634790 |
| -640329000 -584298000 3498 -492 |
| -639359174 -585937662 |
| -639262192 -586101628 1206 593 |
| -639452692 -586101628 |
| -639452692 -588017700 |
| -640329000 -588017700 0 -288 |
| -639561121 -588439929 |
| -639394192 -588531717 1511 288 |
| -639584692 -588531717 |
| -639584692 -589787992 |
| -639394192 -589787992 1800 900 |
| -639394192 -589978492 |
| -639318000 -589978492 |
| -639318000 -590550000 900 -900 |
| -638746492 -590550000 |
| -638746492 -591685192 |
| -638555992 -591685192 1800 23 |
| -638746332 -591693000 |
| -638555992 -591700808 1776 23 |
| -638746492 -591700808 |
| -638746492 -592836000 |
| -639318000 -592836000 0 -900 |
| -639318000 -593407508 |
| -641604000 -593407508 |
| -641604000 -592836000 2700 -900 |
| -642175508 -592836000 |
| -642175508 -590550000 |
| -641604000 -590550000 1800 -900 |
| -641604000 -589978492 |
| -641527808 -589978492 |
| -641527808 -589787992 2700 900 |
| -641337308 -589787992 |
| -641337308 -588149700 |
| -640461000 -588149700 1800 -288 |
| -641228879 -587727471 |
| -641395808 -587635683 3311 288 |
| -641205308 -587635683 |
| -641205308 -586101628 |
| -641395808 -586101628 0 593 |
| -641298826 -585937662 |
| -640329000 -584298000 2393 -2292 |
| -638453999 -583961210 |
| -638266500 -583927531 1901 1596 |
| -638079001 -583961210 |
| -636204000 -584298000 1698 -1081 |
| -635298825 -582621780 |
| -635208308 -582454159 2416 1183 |
| -635017808 -582454159 |
| -635017808 -581841628 |
| -635208308 -581841628 0 593 |
| -635111326 -581677662 |
| -634141500 -580038000 2393 -492 |
| -636016501 -580374790 |
| -636204000 -580408469 101 1596 |
| -636391499 -580374790 |
| -638266500 -580038000 3498 -2742 |
| -637792853 -578192813 |
| -637745489 -578008295 2556 593 |
| -637610785 -578142999 |
| -634310543 -574842757 |
| -633690900 -575462400 1350 -450 |
| -633690900 -574586092 |
| -584301600 -574586092 |
| -584301600 -575462400 900 -450 |
| -583681957 -574842757 |
| -579997371 -578527343 |
| -579862667 -578392639 2250 559 |
| -579826500 -578579674 |
| -579501000 -580263000 1009 -1007 |
| -577786499 -580258031 |
| -577596000 -580257479 1801 14 |
| -577786420 -580263000 |
| -577596000 -580268521 1783 14 |
| -577786499 -580267969 |
| -579501000 -580263000 3598 -135 |
| -577835074 -580668250 |
| -577649972 -580713278 1663 1486 |
| -577515268 -580847982 |
| -577426657 -580759371 |
| -577561361 -580624667 3150 559 |
| -577374326 -580588500 |
| -575691000 -580263000 1909 -107 |
| -577405501 -580267969 |
| -577596000 -580268521 1 14 |
| -577405580 -580263000 |
| -577596000 -580257479 3583 14 |
| -577405501 -580258031 |
| -575691000 -580263000 1798 -1796 |
| -573976499 -580258031 |
| -573786000 -580257479 1801 14 |
| -573976420 -580263000 |
| -573786000 -580268521 1783 14 |
| -573976499 -580267969 |
| -575691000 -580263000 3598 -107 |
| -574007674 -580588500 |
| -573820639 -580624667 1690 559 |
| -573955343 -580759371 |
| -573866732 -580847982 |
| -573732028 -580713278 2250 1486 |
| -573546926 -580668250 |
| -571881000 -580263000 1936 -135 |
| -573595501 -580267969 |
| -573786000 -580268521 1 14 |
| -573595580 -580263000 |
| -573786000 -580257479 3583 14 |
| -573595501 -580258031 |
| -571881000 -580263000 1798 -1457 |
| -570460545 -579302872 |
| -570302717 -579196192 2140 559 |
| -570302717 -579386692 |
| -567598486 -579386692 |
| -567598486 -579196192 2700 450 |
| -567463782 -579330896 |
| -564042443 -575909557 |
| -563422800 -576529200 1350 -450 |
| -563422800 -575652892 |
| -544372800 -575652892 |
| -544372800 -576529200 900 -450 |
| -543753157 -575909557 |
| -533580457 -586082257 |
| -534200100 -586701900 450 -450 |
| -533323792 -586701900 |
| -533323792 -637753500 |
| -533323792 -639855600 |
| -534200100 -639855600 0 -450 |
| -533580457 -640475243 |
| -534327999 -641222785 |
| -534193295 -641357489 1350 593 |
| -534377813 -641404853 |
| -536223000 -641878500 143 -942 |
| -535886210 -643753501 |
| -535852531 -643941000 1001 1596 |
| -535886210 -644128499 |
| -536223000 -646003500 798 -2292 |
| -537862662 -646973326 |
| -538026628 -647070308 306 593 |
| -538026628 -646879808 |
| -538639159 -646879808 |
| -538639159 -647070308 900 1183 |
| -538806780 -647160825 |
| -540483000 -648066000 283 -1327 |
| -540956647 -649911187 |
| -541004011 -650095705 756 593 |
| -541138715 -649961001 |
| -567699010 -676521296 |
| -567564306 -676656000 1350 1350 |
| -567564306 -676846500 |
| -525399000 -676846500 |
| -525399000 -676656000 2700 900 |
| -525208500 -676656000 |
| ANP000089 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -559498508 -585978000 |
| -556069492 -585978000 |
| ANP000090 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 67 52 381000 1 |
| -581596420 -591693000 |
| -581406000 -591698521 1783 14 |
| -581596499 -591697969 |
| -583311000 -591693000 3598 -1007 |
| -583636500 -593376326 |
| -583672667 -593563361 790 559 |
| -583807371 -593428657 |
| -586958557 -596579843 |
| -587578200 -595960200 3150 -450 |
| -587578200 -596836508 |
| -591898814 -596836508 |
| -591898814 -597027008 900 450 |
| -592033518 -596892304 |
| -605768843 -610627629 |
| -605634139 -610762333 1350 559 |
| -605821174 -610798500 |
| -607504500 -611124000 109 -2918 |
| -607179000 -609440674 |
| -607142833 -609253639 2590 559 |
| -607008129 -609388343 |
| -597432158 -599812372 |
| -597566862 -599677668 3150 1533 |
| -597626940 -599496889 |
| -597903300 -598665300 2883 -183 |
| -597903300 -599541608 |
| -600699914 -599541608 |
| -600699914 -599732108 900 450 |
| -600834618 -599597404 |
| -605768843 -604531629 |
| -605634139 -604666333 1350 559 |
| -605821174 -604702500 |
| -607504500 -605028000 109 -2918 |
| -607179000 -603344674 |
| -607142833 -603157639 2590 559 |
| -607008129 -603292343 |
| -601761443 -598045657 |
| -601141800 -598665300 1350 -450 |
| -601141800 -597788992 |
| -598345186 -597788992 |
| -598345186 -597598492 2700 450 |
| -598210482 -597733196 |
| -594156018 -593678732 |
| -594290722 -593544028 3150 1486 |
| -594335750 -593358926 |
| -594741000 -591693000 2836 -1034 |
| -596455494 -591700027 |
| -596645992 -591700808 2 21 |
| -596455652 -591693000 |
| -596645992 -591685192 3576 21 |
| -596455494 -591685973 |
| -594741000 -591693000 1797 -1795 |
| -593026499 -591688031 |
| -592836000 -591687479 1801 14 |
| -593026420 -591693000 |
| -592836000 -591698521 1783 14 |
| -593026499 -591697969 |
| -594741000 -591693000 3598 -135 |
| -593075074 -592098250 |
| -592889972 -592143278 1663 1486 |
| -592755268 -592277982 |
| -592666657 -592189371 |
| -592801361 -592054667 3150 559 |
| -592614326 -592018500 |
| -590931000 -591693000 1909 -107 |
| -592645501 -591697969 |
| -592836000 -591698521 1 14 |
| -592645580 -591693000 |
| -592836000 -591687479 3583 14 |
| -592645501 -591688031 |
| -590931000 -591693000 1798 -1796 |
| -589216499 -591688031 |
| -589026000 -591687479 1801 14 |
| -589216420 -591693000 |
| -589026000 -591698521 1783 14 |
| -589216499 -591697969 |
| -590931000 -591693000 3598 -1007 |
| -591256500 -593376326 |
| -591292667 -593563361 790 559 |
| -591427371 -593428657 |
| -592811842 -594813128 |
| -592677138 -594947832 1350 1533 |
| -592617060 -595128611 |
| -592340700 -595960200 1083 -183 |
| -592340700 -595083892 |
| -588020086 -595083892 |
| -588020086 -594893392 2700 450 |
| -587885382 -595028096 |
| -586536018 -593678732 |
| -586670722 -593544028 3150 1486 |
| -586715750 -593358926 |
| -587121000 -591693000 2836 -1035 |
| -588835501 -591697969 |
| -589026000 -591698521 1 14 |
| -588835580 -591693000 |
| -589026000 -591687479 3583 14 |
| -588835501 -591688031 |
| -587121000 -591693000 1798 -1796 |
| -585406499 -591688031 |
| -585216000 -591687479 1801 14 |
| -585406420 -591693000 |
| -585216000 -591698521 1783 14 |
| -585406499 -591697969 |
| -587121000 -591693000 3598 -135 |
| -585455074 -592098250 |
| -585269972 -592143278 1663 1486 |
| -585135268 -592277982 |
| -585046657 -592189371 |
| -585181361 -592054667 3150 559 |
| -584994326 -592018500 |
| -583311000 -591693000 1909 -107 |
| -585025501 -591697969 |
| -585216000 -591698521 1 14 |
| -585025580 -591693000 |
| -585216000 -591687479 3583 14 |
| -585025501 -591688031 |
| -583311000 -591693000 1798 -1796 |
| -581596499 -591688031 |
| -581406000 -591687479 1801 14 |
| -581596420 -591693000 |
| ANP000091 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 194 141 381000 1 |
| -573976420 -591693000 |
| -573786000 -591698521 1783 14 |
| -573976499 -591697969 |
| -575691000 -591693000 3598 -1007 |
| -576016500 -593376326 |
| -576052667 -593563361 790 559 |
| -576187371 -593428657 |
| -583339057 -600580343 |
| -583958700 -599960700 3150 -450 |
| -583958700 -600837008 |
| -590260514 -600837008 |
| -590260514 -601027508 900 450 |
| -590395218 -600892804 |
| -605873248 -616370834 |
| -605738544 -616505538 1350 670 |
| -605915139 -616576984 |
| -607504500 -617220000 220 -456 |
| -605933123 -617905793 |
| -605758526 -617981992 1564 1135 |
| -605758526 -618172492 |
| -604822186 -618172492 |
| -604822186 -617981992 2700 450 |
| -604687482 -618116696 |
| -595905157 -609334371 |
| -596039861 -609199667 3150 559 |
| -595852826 -609163500 |
| -594169500 -608838000 1909 -2918 |
| -594495000 -610521326 |
| -594531167 -610708361 790 559 |
| -594665871 -610573657 |
| -602930102 -618837888 |
| -602795398 -618972592 1350 1350 |
| -602795398 -619163092 |
| -600478786 -619163092 |
| -600478786 -618972592 2700 450 |
| -600344082 -619107296 |
| -595905157 -614668371 |
| -596039861 -614533667 3150 559 |
| -595852826 -614497500 |
| -594169500 -614172000 1909 -2918 |
| -594495000 -615855326 |
| -594531167 -616042361 790 559 |
| -594665871 -615907657 |
| -597062702 -618304488 |
| -596927998 -618439192 1350 1350 |
| -596927998 -618629692 |
| -595747783 -618629692 |
| -595747783 -618439192 2700 559 |
| -595589955 -618545872 |
| -594169500 -619506000 1459 -2918 |
| -595589955 -620466128 |
| -595747783 -620572808 340 559 |
| -595747783 -620382308 |
| -596547014 -620382308 |
| -596547014 -620572808 900 450 |
| -596681718 -620438104 |
| -597893257 -621649643 |
| -598512900 -621030000 3150 -450 |
| -598512900 -621906308 |
| -621845398 -621906308 |
| -621845398 -622096808 900 1350 |
| -621980102 -622231512 |
| -620303718 -623907896 |
| -620169014 -623773192 2250 450 |
| -620169014 -623963692 |
| -595747783 -623963692 |
| -595747783 -623773192 2700 559 |
| -595589955 -623879872 |
| -594169500 -624840000 1459 -2918 |
| -595589955 -625800128 |
| -595747783 -625906808 340 559 |
| -595747783 -625716308 |
| -619445098 -625716308 |
| -619445098 -625906808 900 1350 |
| -619579802 -626041512 |
| -613636218 -631985096 |
| -613501514 -631850392 2250 450 |
| -613501514 -632040892 |
| -612724200 -632040892 |
| -612724200 -632917200 900 -450 |
| -612104557 -632297557 |
| -596227971 -648174143 |
| -596093267 -648039439 2250 559 |
| -596057100 -648226474 |
| -595731600 -649909800 1009 -1007 |
| -594017099 -649904831 |
| -593826600 -649904279 1801 14 |
| -594017020 -649909800 |
| -593826600 -649915321 1783 14 |
| -594017099 -649914769 |
| -595731600 -649909800 3598 -46 |
| -594023197 -650054352 |
| -593833375 -650070413 1751 1398 |
| -593698671 -650205117 |
| -593686140 -650192586 |
| -593820844 -650057882 3150 494 |
| -593630920 -650043074 |
| -591921600 -649909800 1844 -42 |
| -593636101 -649914769 |
| -593826600 -649915321 1 14 |
| -593636180 -649909800 |
| -593826600 -649904279 3583 14 |
| -593636101 -649904831 |
| -591921600 -649909800 1798 -1392 |
| -590618689 -648795367 |
| -590473922 -648671542 2205 494 |
| -590473922 -648862042 |
| -588586404 -648862042 |
| -588586404 -648671542 2700 450 |
| -588451700 -648806246 |
| -585385377 -645739923 |
| -584644500 -646480800 1350 -450 |
| -584644500 -645433042 |
| -582244078 -645433042 |
| -582244078 -645242542 2700 494 |
| -582099311 -645366367 |
| -580796400 -646480800 1394 -2789 |
| -582099311 -647595233 |
| -582244078 -647719058 405 494 |
| -582244078 -647528558 |
| -584131596 -647528558 |
| -584131596 -647719058 900 450 |
| -584266300 -647584354 |
| -587332623 -650650677 |
| -588073500 -649909800 3150 -450 |
| -588073500 -650957558 |
| -590473922 -650957558 |
| -590473922 -651148058 900 494 |
| -590618689 -651024233 |
| -591921600 -649909800 3194 -539 |
| -592054874 -651619120 |
| -592069682 -651809044 855 494 |
| -592204386 -651674340 |
| -593180973 -652650927 |
| -593921850 -651910050 3150 -450 |
| -593921850 -652957808 |
| -620396516 -652957808 |
| -620396516 -651910050 2700 -450 |
| -621137393 -652650927 |
| -622508266 -651280054 |
| -622642970 -651414758 450 450 |
| -622642970 -651224258 |
| -623506622 -651224258 |
| -623506622 -651414758 900 494 |
| -623651389 -651290933 |
| -624954300 -650176500 3194 -539 |
| -625087574 -651885820 |
| -625102382 -652075744 855 494 |
| -625237086 -651941040 |
| -626213673 -652917627 |
| -626954550 -652176750 3150 -450 |
| -626954550 -653224508 |
| -658067250 -653224508 |
| -658067250 -652176750 2700 -450 |
| -658808127 -652917627 |
| -661723496 -650002258 |
| -661858200 -650136962 450 537 |
| -661887273 -649948693 |
| -662178000 -648066000 2787 -1271 |
| -663854220 -647160825 |
| -664021841 -647070308 3316 1183 |
| -664021841 -646879808 |
| -664409372 -646879808 |
| -664409372 -647070308 900 593 |
| -664573338 -646973326 |
| -666213000 -646003500 3293 -2292 |
| -666549790 -644128499 |
| -666583469 -643941000 2801 1596 |
| -666549790 -643753501 |
| -666213000 -641878500 2598 -1596 |
| -666549790 -640003499 |
| -666583469 -639816000 2801 1596 |
| -666549790 -639628501 |
| -666213000 -637753500 2598 -1596 |
| -666549790 -635878499 |
| -666583469 -635691000 2801 1596 |
| -666549790 -635503501 |
| -666213000 -633628500 2598 -1596 |
| -666549790 -631753499 |
| -666583469 -631566000 2801 1596 |
| -666549790 -631378501 |
| -666213000 -629503500 2598 -1596 |
| -666549790 -627628499 |
| -666583469 -627441000 2801 1596 |
| -666549790 -627253501 |
| -666213000 -625378500 2598 -1596 |
| -666549790 -623503499 |
| -666583469 -623316000 2801 1596 |
| -666549790 -623128501 |
| -666213000 -621253500 2598 -1596 |
| -666549790 -619378499 |
| -666583469 -619191000 2801 1596 |
| -666549790 -619003501 |
| -666213000 -617128500 2598 -1596 |
| -666549790 -615253499 |
| -666583469 -615066000 2801 1596 |
| -666549790 -614878501 |
| -666213000 -613003500 2598 -1596 |
| -666549790 -611128499 |
| -666583469 -610941000 2801 1596 |
| -666549790 -610753501 |
| -666213000 -608878500 2598 -1596 |
| -666549790 -607003499 |
| -666583469 -606816000 2801 1596 |
| -666549790 -606628501 |
| -666213000 -604753500 2598 -1596 |
| -666549790 -602878499 |
| -666583469 -602691000 2801 1596 |
| -666549790 -602503501 |
| -666213000 -600628500 2598 -3396 |
| -665876210 -602503501 |
| -665842531 -602691000 1001 1596 |
| -665876210 -602878499 |
| -666213000 -604753500 798 -492 |
| -664573338 -603783674 |
| -664409372 -603686692 2106 593 |
| -664409372 -603877192 |
| -664021841 -603877192 |
| -664021841 -603686692 2700 1183 |
| -663854220 -603596175 |
| -662178000 -602691000 2083 -1081 |
| -662514790 -600815999 |
| -662548469 -600628500 2801 1596 |
| -662514790 -600441001 |
| -662178000 -598566000 2598 -3396 |
| -661841210 -600441001 |
| -661807531 -600628500 1001 1596 |
| -661841210 -600815999 |
| -662178000 -602691000 798 -492 |
| -660538338 -601721174 |
| -660374372 -601624192 2106 593 |
| -660374372 -601814692 |
| -643747486 -601814692 |
| -643747486 -601624192 2700 450 |
| -643612782 -601758896 |
| -640166243 -598312357 |
| -639546600 -598932000 1350 -450 |
| -639546600 -598055692 |
| -622417783 -598055692 |
| -622417783 -597865192 2700 559 |
| -622259955 -597971872 |
| -620839500 -598932000 1459 -2918 |
| -622259955 -599892128 |
| -622417783 -599998808 340 559 |
| -622417783 -599808308 |
| -639104714 -599808308 |
| -639104714 -599998808 900 450 |
| -639239418 -599864104 |
| -642685957 -603310643 |
| -643305600 -602691000 3150 -239 |
| -642991005 -603508891 |
| -642922616 -603686692 1110 1589 |
| -642922616 -603877192 |
| -642069000 -603877192 |
| -642069000 -604753500 900 -420 |
| -641482193 -604102675 |
| -641354628 -603961192 2279 420 |
| -641354628 -604151692 |
| -622417783 -604151692 |
| -622417783 -603961192 2700 559 |
| -622259955 -604067872 |
| -620839500 -605028000 1459 -2918 |
| -622259955 -605988128 |
| -622417783 -606094808 340 559 |
| -622417783 -605904308 |
| -627560398 -605904308 |
| -627560398 -606094808 900 1350 |
| -627695102 -606229512 |
| -623732718 -610191896 |
| -623598014 -610057192 2250 450 |
| -623598014 -610247692 |
| -622417783 -610247692 |
| -622417783 -610057192 2700 559 |
| -622259955 -610163872 |
| -620839500 -611124000 1459 -2918 |
| -622259955 -612084128 |
| -622417783 -612190808 340 559 |
| -622417783 -612000308 |
| -624039900 -612000308 |
| -624039900 -611124000 2700 -218 |
| -624365622 -611937524 |
| -624436431 -612114375 681 1568 |
| -624571135 -612249079 |
| -621335871 -615484343 |
| -621201167 -615349639 2250 559 |
| -621165000 -615536674 |
| -620839500 -617220000 1009 -1245 |
| -619268123 -617905793 |
| -619093526 -617981992 1564 1135 |
| -619093526 -618172492 |
| -609250474 -618172492 |
| -609250474 -617981992 2700 1135 |
| -609075877 -617905793 |
| -607504500 -617220000 2035 -1117 |
| -607560203 -615506397 |
| -607566392 -615315998 2718 431 |
| -607431688 -615450702 |
| -591322043 -599341057 |
| -590702400 -599960700 1350 -450 |
| -590702400 -599084392 |
| -584400586 -599084392 |
| -584400586 -598893892 2700 450 |
| -584265882 -599028596 |
| -578916018 -593678732 |
| -579050722 -593544028 3150 1486 |
| -579095750 -593358926 |
| -579501000 -591693000 2836 -1035 |
| -581215501 -591697969 |
| -581406000 -591698521 1 14 |
| -581215580 -591693000 |
| -581406000 -591687479 3583 14 |
| -581215501 -591688031 |
| -579501000 -591693000 1798 -1796 |
| -577786499 -591688031 |
| -577596000 -591687479 1801 14 |
| -577786420 -591693000 |
| -577596000 -591698521 1783 14 |
| -577786499 -591697969 |
| -579501000 -591693000 3598 -135 |
| -577835074 -592098250 |
| -577649972 -592143278 1663 1486 |
| -577515268 -592277982 |
| -577426657 -592189371 |
| -577561361 -592054667 3150 559 |
| -577374326 -592018500 |
| -575691000 -591693000 1909 -107 |
| -577405501 -591697969 |
| -577596000 -591698521 1 14 |
| -577405580 -591693000 |
| -577596000 -591687479 3583 14 |
| -577405501 -591688031 |
| -575691000 -591693000 1798 -1796 |
| -573976499 -591688031 |
| -573786000 -591687479 1801 14 |
| -573976420 -591693000 |
| ANP000092 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -573595501 -591688031 |
| -571881000 -591693000 1798 -3596 |
| -573595501 -591697969 |
| -573786000 -591698521 1 14 |
| -573595580 -591693000 |
| -573786000 -591687479 3583 14 |
| -573595501 -591688031 |
| ANP000093 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 36 23 381000 1 |
| -562127392 -599846400 |
| -562127392 -602132400 |
| -562698900 -602132400 0 -900 |
| -562698900 -602703908 |
| -563834092 -602703908 |
| -563834092 -602894408 900 23 |
| -563841900 -602704068 |
| -563849708 -602894408 876 23 |
| -563849708 -602703908 |
| -564238214 -602703908 |
| -564238214 -602894408 900 450 |
| -564372918 -602759704 |
| -564426882 -602813668 |
| -564292178 -602948372 1350 1486 |
| -564247150 -603133474 |
| -563841900 -604799400 1036 -134 |
| -563848927 -603084906 |
| -563849708 -602894408 2702 21 |
| -563841900 -603084748 |
| -563834092 -602894408 2676 21 |
| -563834873 -603084906 |
| -563841900 -604799400 897 -1795 |
| -563836931 -606513901 |
| -563836379 -606704400 901 14 |
| -563841900 -606513980 |
| -563847421 -606704400 883 14 |
| -563846869 -606513901 |
| -563841900 -604799400 2698 -1035 |
| -565507826 -604394150 |
| -565692928 -604349122 3463 1486 |
| -565827632 -604214418 |
| -567298957 -605685743 |
| -567918600 -605066100 3150 -450 |
| -567918600 -605942408 |
| -576620714 -605942408 |
| -576620714 -606132908 900 450 |
| -576755418 -605998204 |
| -579098843 -608341629 |
| -578964139 -608476333 1350 559 |
| -579151174 -608512500 |
| -580834500 -608838000 109 -2918 |
| -580509000 -607154674 |
| -580472833 -606967639 2590 559 |
| -580338129 -607102343 |
| -577682243 -604446457 |
| -577062600 -605066100 1350 -450 |
| -577062600 -604189792 |
| -568360486 -604189792 |
| -568360486 -603999292 2700 450 |
| -568225782 -604133996 |
| -565612204 -601520418 |
| -565746908 -601385714 3150 450 |
| -565556408 -601385714 |
| -565556408 -599846400 |
| -564984900 -599846400 1800 -900 |
| -564984900 -599274892 |
| -562698900 -599274892 |
| -562698900 -599846400 900 -900 |
| -562127392 -599846400 |
| ANP000094 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -606894899 |
| -563841900 -608609400 898 -1796 |
| -563836931 -610323901 |
| -563836379 -610514400 901 14 |
| -563841900 -610323980 |
| -563847421 -610514400 883 14 |
| -563846869 -610323901 |
| -563841900 -608609400 2698 -557 |
| -565262355 -609569528 |
| -565420183 -609676208 340 559 |
| -565420183 -609485708 |
| -566829014 -609485708 |
| -566829014 -609676208 900 450 |
| -566963718 -609541504 |
| -572213857 -614791643 |
| -572833500 -614172000 3150 -450 |
| -572833500 -615048308 |
| -579256217 -615048308 |
| -579256217 -615238808 900 559 |
| -579414045 -615132128 |
| -580834500 -614172000 3259 -2918 |
| -579414045 -613211872 |
| -579256217 -613105192 2140 559 |
| -579256217 -613295692 |
| -573275386 -613295692 |
| -573275386 -613105192 2700 450 |
| -573140682 -613239896 |
| -567890543 -607989757 |
| -567270900 -608609400 1350 -450 |
| -567270900 -607733092 |
| -565420183 -607733092 |
| -565420183 -607542592 2700 559 |
| -565262355 -607649272 |
| -563841900 -608609400 1459 -557 |
| -563846869 -606894899 |
| -563847421 -606704400 2701 14 |
| -563841900 -606894820 |
| -563836379 -606704400 2683 14 |
| -563836931 -606894899 |
| ANP000095 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -610704899 |
| -563841900 -612419400 898 -1796 |
| -563836931 -614133901 |
| -563836379 -614324400 901 14 |
| -563841900 -614133980 |
| -563847421 -614324400 883 14 |
| -563846869 -614133901 |
| -563841900 -612419400 2698 -1796 |
| -563846869 -610704899 |
| -563847421 -610514400 2701 14 |
| -563841900 -610704820 |
| -563836379 -610514400 2683 14 |
| -563836931 -610704899 |
| ANP000096 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -614514899 |
| -563841900 -616229400 898 -1796 |
| -563836931 -617943901 |
| -563836379 -618134400 901 14 |
| -563841900 -617943980 |
| -563847421 -618134400 883 14 |
| -563846869 -617943901 |
| -563841900 -616229400 2698 -557 |
| -565262355 -617189528 |
| -565420183 -617296208 340 559 |
| -565420183 -617105708 |
| -569115014 -617105708 |
| -569115014 -617296208 900 450 |
| -569249718 -617161504 |
| -572213857 -620125643 |
| -572833500 -619506000 3150 -450 |
| -572833500 -620382308 |
| -579256217 -620382308 |
| -579256217 -620572808 900 559 |
| -579414045 -620466128 |
| -580834500 -619506000 3259 -2918 |
| -579414045 -618545872 |
| -579256217 -618439192 2140 559 |
| -579256217 -618629692 |
| -573275386 -618629692 |
| -573275386 -618439192 2700 450 |
| -573140682 -618573896 |
| -570176543 -615609757 |
| -569556900 -616229400 1350 -450 |
| -569556900 -615353092 |
| -565420183 -615353092 |
| -565420183 -615162592 2700 559 |
| -565262355 -615269272 |
| -563841900 -616229400 1459 -557 |
| -563846869 -614514899 |
| -563847421 -614324400 2701 14 |
| -563841900 -614514820 |
| -563836379 -614324400 2683 14 |
| -563836931 -614514899 |
| ANP000097 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -618324899 |
| -563841900 -620039400 898 -1796 |
| -563836931 -621753901 |
| -563836379 -621944400 901 14 |
| -563841900 -621753980 |
| -563847421 -621944400 883 14 |
| -563846869 -621753901 |
| -563841900 -620039400 2698 -1796 |
| -563846869 -618324899 |
| -563847421 -618134400 2701 14 |
| -563841900 -618324820 |
| -563836379 -618134400 2683 14 |
| -563836931 -618324899 |
| ANP000098 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -622134899 |
| -563841900 -623849400 898 -1796 |
| -563836931 -625563901 |
| -563836379 -625754400 901 14 |
| -563841900 -625563980 |
| -563847421 -625754400 883 14 |
| -563846869 -625563901 |
| -563841900 -623849400 2698 -557 |
| -565262355 -624809528 |
| -565420183 -624916208 340 559 |
| -565420183 -624725708 |
| -571401014 -624725708 |
| -571401014 -624916208 900 450 |
| -571535718 -624781504 |
| -572213857 -625459643 |
| -572833500 -624840000 3150 -450 |
| -572833500 -625716308 |
| -579256217 -625716308 |
| -579256217 -625906808 900 559 |
| -579414045 -625800128 |
| -580834500 -624840000 3259 -2918 |
| -579414045 -623879872 |
| -579256217 -623773192 2140 559 |
| -579256217 -623963692 |
| -573275386 -623963692 |
| -573275386 -623773192 2700 450 |
| -573140682 -623907896 |
| -572462543 -623229757 |
| -571842900 -623849400 1350 -450 |
| -571842900 -622973092 |
| -565420183 -622973092 |
| -565420183 -622782592 2700 559 |
| -565262355 -622889272 |
| -563841900 -623849400 1459 -557 |
| -563846869 -622134899 |
| -563847421 -621944400 2701 14 |
| -563841900 -622134820 |
| -563836379 -621944400 2683 14 |
| -563836931 -622134899 |
| ANP000099 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -658341000 |
| -660139642 -658341000 |
| ANP000100 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -669036000 |
| -663964492 -669036000 |
| ANP000101 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -563836931 -625944899 |
| -563841900 -627659400 898 -3596 |
| -563846869 -625944899 |
| -563847421 -625754400 2701 14 |
| -563841900 -625944820 |
| -563836379 -625754400 2683 14 |
| -563836931 -625944899 |
| ANP000102 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 20 11 381000 1 |
| -596836332 -591693000 |
| -596645992 -591700808 1776 23 |
| -596836492 -591700808 |
| -596836492 -592836000 |
| -597408000 -592836000 0 -900 |
| -597408000 -593407508 |
| -598947314 -593407508 |
| -598947314 -593598008 900 450 |
| -599082018 -593463304 |
| -605170357 -599551643 |
| -605790000 -598932000 3150 -450 |
| -605790000 -599808308 |
| -605926217 -599808308 |
| -605926217 -599998808 900 559 |
| -606084045 -599892128 |
| -607504500 -598932000 3259 -2853 |
| -606203089 -597815815 |
| -606058489 -597691795 2206 943 |
| -605923785 -597826499 |
| -600321304 -592224018 |
| -600456008 -592089314 3150 450 |
| -600265508 -592089314 |
| -600265508 -590550000 |
| -599694000 -590550000 1800 -900 |
| -599694000 -589978492 |
| -597408000 -589978492 |
| -597408000 -590550000 900 -900 |
| -596836492 -590550000 |
| -596836492 -591685192 |
| -596645992 -591685192 1800 23 |
| -596836332 -591693000 |
| ANP000103 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -577596000 |
| -663964492 -577596000 |
| ANP000104 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -588291000 |
| -660139642 -588291000 |
| ANP000105 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -654502358 -582168000 |
| -646615642 -582168000 |
| ANP000106 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -577596000 |
| -528328492 -577596000 |
| ANP000107 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -552406931 -625944899 |
| -552411900 -627659400 898 -3596 |
| -552416869 -625944899 |
| -552417421 -625754400 2701 14 |
| -552411900 -625944820 |
| -552406379 -625754400 2683 14 |
| -552406931 -625944899 |
| ANP000108 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -542296358 -658341000 |
| -534409642 -658341000 |
| ANP000109 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -669036000 |
| -528328492 -669036000 |
| HP27860889 POUROUT 25527000 115824000 1 0 |
| POLY 3 0 381000 1 |
| 0 0 |
| 0 762000 |
| 0 0 |
| *TESTPOINT* |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| DFT_CONFIGURATION PARENT |
| { |
| UNITS MILS |
| PROBING_STRATEGY PARENT |
| { |
| PROBE_TOP_SIDE NO |
| PROBE_VIAS YES |
| PROBE_NO_CONNECT NO |
| } |
| DFT_RULES PARENT |
| { |
| PROBE 100 |
| { |
| DRILL_SIZE 69 |
| ENABLE YES |
| } |
| PROBE 75 |
| { |
| DRILL_SIZE 43 |
| ENABLE NO |
| } |
| PROBE 50 |
| { |
| DRILL_SIZE 30 |
| ENABLE NO |
| } |
| MIN_VIA_SIZE 25 |
| MIN_PAD_SIZE 25 |
| PIN_TO_PIN 14 |
| PIN_TO_BOARD 125 |
| PIN_TO_COMPONENT 0 |
| } |
| DIF_FILE PARENT |
| { |
| VIA_PREFIX VIA |
| TP_PART_TYPE TP100 |
| TP_PART_TYPE TP150 |
| TP_PREFIX TP |
| TP_PREFIX PN_TP |
| TP_PREFIX TP_SMD |
| TH_PART_TYPE MTHOLE1 |
| TH_PART_TYPE MTHOLE2 |
| TH_PREFIX TH |
| TH_PREFIX MH |
| NC_NET N.C. |
| INCLUDE_TP YES |
| } |
| RETURN_OPTIONS PARENT |
| { |
| AUTO_RETURN YES |
| ADD_TP_VIAS_ON_RETURN NO |
| ADD_MULTIPLE_FOR_POWERNET NO |
| TP_VIA_TYPE STANDARDVIA |
| PPCB_NOT_CONNECTED_NET_NAME NOT_CONNECTED |
| } |
| } |
| LAYER DATA |
| { |
| LAYER 0 |
| { |
| LAYER_THICKNESS 0 |
| DIELECTRIC 3.300000 |
| } |
| LAYER 1 |
| { |
| LAYER_NAME Top |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION HORIZONTAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Top |
| ASSOCIATED_PASTE_MASK Paste Mask Top |
| ASSOCIATED_SOLDER_MASK Solder Mask Top |
| ASSOCIATED_ASSEMBLY Assembly Drawing Top |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 3 |
| VIA 3 |
| PAD 3 |
| COPPER 3 |
| 2DLINE 3 |
| TEXT 3 |
| ERROR 5 |
| TOPCOMPONENT 1 |
| BOTTOMCOMPONENT 0 |
| REFDES 1 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 381000 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 4.300000 |
| COST 0 |
| } |
| LAYER 2 |
| { |
| LAYER_NAME Bottom |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION VERTICAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Bottom |
| ASSOCIATED_PASTE_MASK Paste Mask Bottom |
| ASSOCIATED_SOLDER_MASK Solder Mask Bottom |
| ASSOCIATED_ASSEMBLY Assembly Drawing Bottom |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 11 |
| VIA 11 |
| PAD 11 |
| COPPER 11 |
| 2DLINE 11 |
| TEXT 11 |
| ERROR 13 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 14 |
| REFDES 14 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 3.300000 |
| COST 0 |
| } |
| LAYER 3 |
| { |
| LAYER_NAME Layer_3 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 4 |
| { |
| LAYER_NAME Layer_4 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 5 |
| { |
| LAYER_NAME Layer_5 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 6 |
| { |
| LAYER_NAME Layer_6 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 7 |
| { |
| LAYER_NAME Layer_7 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 8 |
| { |
| LAYER_NAME Layer_8 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 9 |
| { |
| LAYER_NAME Layer_9 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 10 |
| { |
| LAYER_NAME Layer_10 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 11 |
| { |
| LAYER_NAME Layer_11 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 12 |
| { |
| LAYER_NAME Layer_12 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 13 |
| { |
| LAYER_NAME Layer_13 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 14 |
| { |
| LAYER_NAME Layer_14 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 15 |
| { |
| LAYER_NAME Layer_15 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 16 |
| { |
| LAYER_NAME Layer_16 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 17 |
| { |
| LAYER_NAME Layer_17 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 18 |
| { |
| LAYER_NAME Layer_18 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 19 |
| { |
| LAYER_NAME Layer_19 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 20 |
| { |
| LAYER_NAME Layer_20 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 21 |
| { |
| LAYER_NAME Solder Mask Top |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 22 |
| { |
| LAYER_NAME Paste Mask Bottom |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 23 |
| { |
| LAYER_NAME Paste Mask Top |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 24 |
| { |
| LAYER_NAME Drill Drawing |
| LAYER_TYPE DRILL |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 5 |
| TEXT 5 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 25 |
| { |
| LAYER_NAME Layer_25 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 26 |
| { |
| LAYER_NAME Silkscreen Top |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 27 |
| { |
| LAYER_NAME Assembly Drawing Top |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 28 |
| { |
| LAYER_NAME Solder Mask Bottom |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 29 |
| { |
| LAYER_NAME Silkscreen Bottom |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 30 |
| { |
| LAYER_NAME Assembly Drawing Bottom |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| } |
| SELECTABILITY DATA |
| { |
| PARTS Y |
| PINS Y |
| TRACES Y |
| VIAS Y |
| TACKS Y |
| UNROUTED Y |
| EDGES Y |
| NODES Y |
| SHAPES Y |
| DIMENSIONS Y |
| TEXT Y |
| AREA_PARTS Y |
| AREA_PINS Y |
| AREA_TRACES Y |
| AREA_VIAS Y |
| AREA_TACKS Y |
| AREA_UNROUTED Y |
| AREA_EDGES Y |
| AREA_NODES Y |
| AREA_SHAPES Y |
| AREA_DIMENSIONS Y |
| AREA_TEXT Y |
| } |
| VISIBILITY DATA |
| { |
| PADS Y |
| TRACKS Y |
| VIAS Y |
| COPPER Y |
| LINES Y |
| TEXT Y |
| ERRORS Y |
| CLUSTER Y |
| TOP_COMPONENT Y |
| BOTTOM_COMPONENT Y |
| PLANE_THERMAL Y |
| REFDES Y |
| PARTTYPES Y |
| ATTRIBUTES Y |
| KEEPOUTS Y |
| SELECTION_COLOR 15 |
| HIGHLIGHT_COLOR 14 |
| FIXED_COLOR 3 |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION PARENT |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 609600 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| NET GND |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 952500 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 1904999936 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 38100000 |
| PARALLEL_GAP 7620000 |
| TANDEM_LENGTH 38100000 |
| TANDEM_GAP 7620000 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 7620000 |
| MATCH_LENGTH_TOLERANCE 7620000 |
| } |
| } |
| RULE_SET (4) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 1 |
| VALID_LAYER 2 |
| VALID_VIA_TYPE STANDARDVIA |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| CAM_SECTION PARENT |
| { |
| CAM_VERSION V4.0 |
| CAM_DOC_LIST PARENT |
| { |
| CAM_DOC_NAME (art001.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art001.pho |
| DOC_LAYER_NAMES Top |
| DOC_LAYER_NUMBERS 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 1 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (art002.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art002.pho |
| DOC_LAYER_NAMES Bottom |
| DOC_LAYER_NUMBERS 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 2 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (sm001021.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm001021.pho |
| DOC_LAYER_NAMES Top Solder_Mask_Top |
| DOC_LAYER_NUMBERS 1 21 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 21 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (smd002022.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd002022.pho |
| DOC_LAYER_NAMES Bottom Paste_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 22 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (smd001023.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd001023.pho |
| DOC_LAYER_NAMES Top Paste_Mask_Top |
| DOC_LAYER_NUMBERS 1 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 23 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sst001026.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sst001026.pho |
| DOC_LAYER_NAMES Top Silkscreen_Top |
| DOC_LAYER_NUMBERS 1 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 26 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES Black None |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sm002028.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm002028.pho |
| DOC_LAYER_NAMES Bottom Solder_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 28 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (ssb002029.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE ssb002029.pho |
| DOC_LAYER_NAMES Bottom Silkscreen_Bottom |
| DOC_LAYER_NUMBERS 2 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 29 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None Black |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| } |
| CAM_AUGMENT_ON_THE_FLY Y |
| CAM_DRILL_SYMBOL_TABLE PARENT |
| { |
| MARKER_SIZE 0 |
| MARKER_LINE_WIDTH 381000 |
| MARKER_CHAR_HEIGHT 0 |
| CHART_TEXT_HEIGHT 0 |
| CHART_LINE_WIDTH 0 |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE Value |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Tolerance |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Part Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Description |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Cost |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #2 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE ASSEMBLY_OPTIONS |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| INHERITANCE PART |
| INHERITANCE JUMPER |
| ECO_REGISTRATION Y |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE PowerGround |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Voltage |
| { |
| TYPE QUANTITY |
| QUANTITY Voltage |
| ABBR V |
| UNIT Volt |
| MIN -100kV |
| MAX 100kV |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Geometry.Height |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 952500000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Diameter |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Probe to Trace Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Probe to Pad Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Generate Test Points |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Allow Stubs |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Stub Length |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Use Via Grid |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid X-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid Y-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE HyperLynx.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Sim Direction |
| { |
| TYPE LIST N |
| { |
| SIM_BOTH |
| SIM_IN |
| SIM_OUT |
| } |
| INHERITANCE PIN |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Frequency |
| { |
| TYPE QUANTITY |
| QUANTITY Frequency |
| ABBR Hz |
| UNIT Hertz |
| MIN 0Hz |
| MAX 1000GHz |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Duty Cycle |
| { |
| TYPE QUANTITY |
| QUANTITY |
| ABBR % |
| UNIT percent |
| MIN 0% |
| MAX 100% |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Signal Type |
| { |
| TYPE LIST N |
| { |
| Address |
| Analog High Speed |
| Analog Low Speed |
| Clock |
| Data |
| Do Not Analyze |
| Power Supply |
| Strobe |
| } |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model Pin |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Strategy.Fanout.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.FormatId |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipWidth |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipHeight |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MinLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WToWDistance |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WBtoPad |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxAngle |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WB1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuideCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuide1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPAssignment1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Marker_Shape |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_NumberPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_AngularPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Suffix |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Line_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Preview_Type |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 5 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Use |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.X |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Y |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Amplitude.Min |
| { |
| TYPE INTEGER |
| MIN 3 |
| MAX 30 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Gap.Min |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 10 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MaxChannelWidth |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 381000000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.SoftLengthRrules |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MeanderBeforeTune |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE MatchLength.Name |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Planning.Scheduled |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| DECAL ELYTA |
| { |
| Description elektrolyt SMD velikost A |
| Geometry.Height 1.8 mm |
| } |
| DECAL ELYTB |
| { |
| Description elektrolyt SMD velikost B |
| Geometry.Height 2 mm |
| } |
| DECAL ELYTC |
| { |
| Description elektrolyt SMD velikost C |
| Geometry.Height 2.8 mm |
| } |
| DECAL ELYTD |
| { |
| Description elektrolyt SMD velikost D |
| Geometry.Height 3 mm |
| } |
| DECAL CE020X5 |
| { |
| Description Elyt prumer 5mm, roztec 2.032mm - 80 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE025X6 |
| { |
| Description Elyt prumer 6.3mm, roztec 2.54mm - 100 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE035X8 |
| { |
| Description Elyt prumer 8 mm, roztec3.505 mm - 138 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE050X10 |
| { |
| Description Elyt prumer 10mm, roztec 5.08mm - 200 mils |
| Geometry.Height 17 mm |
| } |
| DECAL CE050X13 |
| { |
| Description Elyt prumer 13mm, roztec 5.08mm - 200 mils |
| Geometry.Height 27 mm |
| } |
| DECAL CE075X16 |
| { |
| Description Elyt prumer 16mm, roztec 7.5mm - 300 mils |
| Geometry.Height 26 mm |
| } |
| DECAL CE075X18 |
| { |
| Description Elyt prumer 18mm, roztec 7.5mm - 300 mils |
| Geometry.Height 43 mm |
| } |
| DECAL CE020X5/L |
| { |
| Description Elyt prumer 5mm na lezato, roztec 2.032mm - 80 mils |
| Geometry.Height 5.5 mm |
| } |
| DECAL CE025X6/L |
| { |
| Description Elyt prumer 6.3mm na lezato, roztec 2.54mm - 100 mils |
| Geometry.Height 6.5 mm |
| } |
| DECAL CE035X8/L |
| { |
| Description Elyt prumer 8 mm na lezato, roztec3.505 mm - 138 mils |
| Geometry.Height 8.5 mm |
| } |
| DECAL CE050X10/L |
| { |
| Description Elyt prumer 10mm na lezato, roztec 5.08mm - 200 mils |
| Geometry.Height 10.5 mm |
| } |
| DECAL CANNON25M |
| { |
| Description konektor Cannon 25 pinu, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M/T |
| { |
| Description konektor Cannon 25 pinu na plocho, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F |
| { |
| Description konektor Cannon 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90 |
| { |
| Description konektor Cannon 9 pinu uhlovy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90/L |
| { |
| Description konektor Cannon 9 pinu uhlovy dlouhy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F/T |
| { |
| Description konektor Cannon na plocho 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F |
| { |
| Description konektor Cannon 25 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F/T |
| { |
| Description konektor Cannon 25 pinu na lezato, samice |
| Geometry.Height 13 mm |
| } |
| DECAL SOD87 |
| { |
| Description dioda SMD v pouzdre SOD87 |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO201 |
| { |
| Description usm. dioda nad 1A roztec 13.97mm, 550mils |
| Geometry.Height 10mm |
| } |
| DECAL DO41 |
| { |
| Description usm. dioda do 1A roztec 8.89mm, 350mils |
| Geometry.Height 3.5mm |
| } |
| DECAL MELF |
| { |
| Description dioda SMD v pouzdre MELF |
| Geometry.Height 3 mm |
| } |
| DECAL MINIMELF |
| { |
| Description dioda SMD v pouzdre MINIMELF |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO35 |
| { |
| Description vseob. dioda roztec 6.35mm, 250mils |
| Geometry.Height 3.5mm |
| } |
| DECAL DS040 |
| { |
| Description dioda nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL TO220AC |
| { |
| Description diodove pouzdro TO220AC |
| Geometry.Height 20mm |
| } |
| DECAL TO220AB |
| { |
| Description diodove pouzdro TO220AB |
| Geometry.Height 20mm |
| } |
| DECAL JUMP1 |
| { |
| Description jednorady hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP1_90 |
| { |
| Description jednorady uhlovy hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2 |
| { |
| Description jednorady hrebinek 2 piny |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2_90 |
| { |
| Description jednorady uhlovy hrebinek 2 piny |
| Geometry.Height 3 mm |
| } |
| DECAL ARK050X2 |
| { |
| Description svorkovnice se dvema piny, roztec 5.08 mm - 200 mils |
| Geometry.Height 13 mm |
| } |
| DECAL CROSS |
| { |
| Description usazovaci kriz |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M3 |
| { |
| Description otvor pro sroub M3 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M4 |
| { |
| Description otvor pro sroub M4 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M2 |
| { |
| Description otvor pro sroub M2 |
| Geometry.Height 0 mm |
| } |
| DECAL R0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| } |
| DECAL R0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| } |
| DECAL R1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| } |
| DECAL RS025 |
| { |
| Description bezny rezistor nastojato roztec 2,54 mm, 100 mils |
| Geometry.Height 9 mm |
| } |
| DECAL RL090 |
| { |
| Description bezny rezistor roztec 8.89mm, 350mils |
| Geometry.Height 3mm |
| } |
| DECAL RL140 |
| { |
| Description rezistor 2W nalezato roztec 13.97mm, 550mils |
| Geometry.Height 4.6mm |
| } |
| DECAL RS040 |
| { |
| Description rezistor 2W nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL R1812 |
| { |
| Description rezistor SMD velikost 1812 |
| Geometry.Height 1mm |
| } |
| DECAL DIP16_300 |
| { |
| Description pouzdro DIP16 roztec 7.62 mm - 300 mils |
| Geometry.Height 6 mm |
| } |
| PARTTYPE DB25M |
| { |
| Description ruzne verze DB25 samecek |
| } |
| PARTTYPE DB9F |
| { |
| Description ruzne verze DB9 samice |
| } |
| PARTTYPE DB25F |
| { |
| Description ruzne verze DB25 samice |
| } |
| PARTTYPE D |
| { |
| Value ??? |
| Description ruzne druhy diod |
| } |
| PARTTYPE HOLE |
| { |
| Description otvor pro ruzne prumery sroubu |
| } |
| PARTTYPE R |
| { |
| Value ??? |
| Description rezistory ruznych typu |
| } |
| PARTTYPE DIP16 |
| { |
| Description patice pro DIL16 |
| } |
| PCB DEFAULT |
| { |
| "DFT.Probe to Trace Clearance" 228600dbunit |
| "DFT.Probe to Pad Clearance" 228600dbunit |
| "DFT.Generate Test Points" No |
| "DFT.Allow Stubs" Yes |
| "DFT.Stub Length" 5715000dbunit |
| "DFT.Use Via Grid" Yes |
| "DFT.Grid X-Coordinate" 952500dbunit |
| "DFT.Grid Y-Coordinate" 952500dbunit |
| AutoDimensioning.Marker_Shape YYNNNY |
| AutoDimensioning.Text_NumberPrecision 0 1 2 |
| AutoDimensioning.Text_AngularPrecision 0 0 0 |
| AutoDimensioning.Text_Suffix mil##mm##" |
| AutoDimensioning.Text_Layer 24 |
| AutoDimensioning.Line_Layer 24 |
| AutoDimensioning.Preview_Type 1 |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD No |
| Rules.ViaAtSMD.FitInside Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Length.Unlimited Yes |
| Placement.Grid.Use No |
| Placement.Grid.X 3810000dbunit |
| Placement.Grid.Y 3810000dbunit |
| Accordion.Amplitude.Min 3 |
| Accordion.Gap.Min 1 |
| Routing.MaxChannelWidth 3810000dbunit |
| Routing.SoftLengthRrules Yes |
| Routing.MeanderBeforeTune No |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/Motory/AC_3F/verze2/SPINACE02.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/SPINACE03.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/spinace.opj |
|---|
| 0,0 → 1,135 |
| (ExpressProject "spinace" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\spinace.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "SPINACE.asc") |
| (OTHER_Netlist_File2 "SPINACE.CMP") |
| (OTHER_View_Output "TRUE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "1") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.DRC") |
| (BOM_Scope "0") |
| (BOM_Mode "0") |
| (BOM_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.BOM") |
| (BOM_Merge_Include "FALSE") |
| (BOM_Property_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_Header "Item\tQuantity\tReference\tPart") |
| (BOM_Include_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.INC") |
| (BOM_Include_File_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_One_Part_Per_Line "FALSE") |
| (BOM_View_Output "TRUE")) |
| (Folder "Outputs" |
| (File ".\spinace.asc" |
| (Type "Report")) |
| (File ".\spinace.drc" |
| (Type "Report")) |
| (File ".\spinace.bom" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x") |
| (PartMRUSelector |
| (No_PCB_Device |
| (FullPartName "No_PCB_Device.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (HOLE_M3 |
| (FullPartName "HOLE_M3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB15F |
| (FullPartName "DB15F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs") |
| (Select "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 297")) |
| (Tab 0)))) |
| /schemata/Motory/AC_3F/verze2/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/KAKLIK/SPINACE03_u.eco |
|---|
| 0,0 → 1,12 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE03_u.pcb -- Mon Mar 10 13:09:02 2003 |
| *DELPIN* |
| CON4.25 GND |
| *NET* |
| *SIGNAL* +12V 30 |
| CON4.25 CON4.1 |
| *END* |
| /schemata/Motory/AC_3F/verze2/zaloha/KAKLIK/SPINACE03_u.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/KAKLIK/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.BOM |
|---|
| 0,0 → 1,28 |
| ROBOT DRIVER Revised: Sunday, March 09, 2003 |
| 000 Revision: 1 |
| Bill Of Materials March 9,2003 10:25:18 Page1 |
| Item Quantity Reference Part |
| ______________________________________________ |
| 1 1 CON1 DB25M |
| 2 1 CON3 DB9F |
| 3 1 CON4 DB25F |
| 4 1 C1 10 uF |
| 5 1 D1 D |
| 6 2 J1,J2 JUMP1 |
| 7 1 J3 JUMP2 |
| 8 3 M1,M2,M3 CROSS |
| 9 4 M4,M5,M6,M7 HOLE_M3 |
| 10 1 M8 Kabel |
| 11 6 R1,R2,R3,R11,R12,R13 R |
| 12 2 R4,R14 1k5 |
| 13 2 U1,U2 KP_1040 |
| 14 2 U6,U7 ULN2003 |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.DRC |
|---|
| 0,0 → 1,23 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| WARNING: [DRC0007] Net has no driving source BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections STROBE |
| SCHEMATIC1, PAGE1 (48.26, 22.86) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N04316 |
| SCHEMATIC1, PAGE1 (68.58, 15.24) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N08219 |
| SCHEMATIC1, PAGE1 (68.58, 71.12) |
| Checking for Invalid References |
| Checking for Duplicate References |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.ONL |
|---|
| 0,0 → 1,854 |
| (PCB SPINACE |
| (description |
| (timeStamp "2003 03 09 09 34 16") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "ROBOT DRIVER") |
| (date "Sunday, March 09, 2003") |
| (document "000") |
| (revision "1") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component D |
| (place D1 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 00005091) |
| ("Source Package" D) |
| (Value D)))) |
| (component JUMP1 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000551B) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000552D) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component DB25F |
| (place CON4 |
| (property |
| ("PCB Footprint" CANNON25F_90) |
| (Device DB25F) |
| (timestamp 000042C0) |
| ("Source Package" DB25F) |
| (Value DB25F)))) |
| (component JUMP2 |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP2) |
| (Device JUMP2) |
| (timestamp 0000553F) |
| ("Source Package" JUMP2) |
| (Value JUMP2)))) |
| (component DB25M |
| (place CON1 |
| (property |
| ("PCB Footprint" CANNON25M_90) |
| (Device DB25M) |
| (timestamp 00005BBA) |
| ("Source Package" DB25M) |
| (Value DB25M)))) |
| (component ULN2003 |
| (place U6 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 000002C9) |
| ("Source Package" ULN2003) |
| (Value ULN2003))) |
| (place U7 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000317) |
| ("Source Package" ULN2003) |
| (Value ULN2003)))) |
| (component KP_1040 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000003) |
| ("Source Package" KP_1040) |
| (Value KP_1040))) |
| (place U2 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000051) |
| ("Source Package" KP_1040) |
| (Value KP_1040)))) |
| (component DB9F |
| (place CON3 |
| (property |
| ("PCB Footprint" CANNON9F_90) |
| (Device DB9F) |
| (timestamp 0000350D) |
| ("Source Package" DB9F) |
| (Value DB9F)))) |
| (component HOLE_M3 |
| (place M4 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CC4) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M5 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CD6) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M6 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CE8) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M7 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CFA) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3)))) |
| (component CROSS |
| (place M1 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 000014D3) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M2 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C4C) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M3 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C60) |
| ("Source Package" CROSS) |
| (Value CROSS)))) |
| (component "C-ELYT" |
| (place C1 |
| (property |
| ("PCB Footprint" CE050X13) |
| (Device ELYT) |
| (timestamp 00006890) |
| ("Source Package" "C-ELYT") |
| (Value "10 uF")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000635) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000067B) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000691) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000006A7) |
| ("Source Package" R) |
| (Value 1k5))) |
| (place R11 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000828) |
| ("Source Package" R) |
| (Value R))) |
| (place R12 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000088C) |
| ("Source Package" R) |
| (Value R))) |
| (place R13 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000086A) |
| ("Source Package" R) |
| (Value R))) |
| (place R14 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000008A2) |
| ("Source Package" R) |
| (Value 1k5))))) |
| (library |
| (image DB25M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DB9F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB9F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4)))) |
| (image DB25F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image KP_1040 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname A1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname K1) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname A2) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname K2) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname A3) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname K3) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname A4) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname K4) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname e4) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname c4) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname e3) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname c3) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname e2) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname c2) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname e1) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname c1) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ULN2003 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname I1) |
| (pintype 0))) |
| (pin 999 2 |
| (property |
| (pinname I2) |
| (pintype 0))) |
| (pin 999 3 |
| (property |
| (pinname I3) |
| (pintype 0))) |
| (pin 999 4 |
| (property |
| (pinname I4) |
| (pintype 0))) |
| (pin 999 5 |
| (property |
| (pinname I5) |
| (pintype 0))) |
| (pin 999 6 |
| (property |
| (pinname I6) |
| (pintype 0))) |
| (pin 999 7 |
| (property |
| (pinname I7) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname GND) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname K) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname O7) |
| (pintype 2))) |
| (pin 999 11 |
| (property |
| (pinname O6) |
| (pintype 2))) |
| (pin 999 12 |
| (property |
| (pinname O5) |
| (pintype 2))) |
| (pin 999 13 |
| (property |
| (pinname O4) |
| (pintype 2))) |
| (pin 999 14 |
| (property |
| (pinname O3) |
| (pintype 2))) |
| (pin 999 15 |
| (property |
| (pinname O2) |
| (pintype 2))) |
| (pin 999 16 |
| (property |
| (pinname O1) |
| (pintype 2)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device C)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CROSS |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SYMBOLS.OLB) |
| (Device CROSS))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4)))) |
| (image HOLE_M3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device PAD)) |
| (pin 999 1 |
| (property |
| (pinname PIN) |
| (pintype 4)))) |
| (image JUMP2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image D |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))))) |
| (network |
| (net RTS |
| (pins |
| CON3-7 U7-6)) |
| (net DTR |
| (pins |
| CON3-4 U7-7)) |
| (net RI |
| (pins |
| CON3-9 U2-15)) |
| (net CTS |
| (pins |
| CON3-8 U2-13)) |
| (net DSR |
| (pins |
| CON3-6 U2-11)) |
| (net D4 |
| (pins |
| U7-2 CON1-6)) |
| (net D6 |
| (pins |
| CON1-8 U7-4)) |
| (net D7 |
| (pins |
| CON1-9 U7-5)) |
| (net D5 |
| (pins |
| U7-3 CON1-7)) |
| (net N21518 |
| (pins |
| U2-10 U2-12 U2-14 U2-16 D1-C C1-A)) |
| (net BA2_1 |
| (pins |
| CON1-14 U6-2)) |
| (net BA2_2 |
| (pins |
| U6-5 CON1-16)) |
| (net BA2_3 |
| (pins |
| CON1-17 U6-7)) |
| (net BA1_6 |
| (pins |
| CON1-10 U1-10)) |
| (net BA1_7 |
| (pins |
| CON1-11 U1-12)) |
| (net BA1_5 |
| (pins |
| U1-14 CON1-12)) |
| (net BA1_4 |
| (pins |
| U1-16 CON1-13)) |
| (net O2_0 |
| (pins |
| U6-16 CON4-14)) |
| (net O2_1 |
| (pins |
| U6-15 CON4-2)) |
| (net O2_2 |
| (pins |
| U6-12 CON4-16)) |
| (net O2_3 |
| (pins |
| U6-10 CON4-17)) |
| (net O0_0 |
| (pins |
| U6-14 CON4-15)) |
| (net O0_1 |
| (pins |
| U6-13 CON4-3)) |
| (net O0_2 |
| (pins |
| U6-11 CON4-4)) |
| (net O0_3 |
| (pins |
| U7-16 CON4-5)) |
| (net O0_4 |
| (pins |
| U7-15 CON4-18)) |
| (net O0_5 |
| (pins |
| U7-14 CON4-6)) |
| (net O0_6 |
| (pins |
| U7-13 CON4-19)) |
| (net O0_7 |
| (pins |
| U7-12 CON4-7)) |
| (net O_RTS |
| (pins |
| U7-11 CON4-20)) |
| (net O_DTR |
| (pins |
| U7-10 CON4-8)) |
| (net I1_4 |
| (pins |
| R4-2 CON4-10)) |
| (net I1_5 |
| (pins |
| R3-2 CON4-22)) |
| (net I1_6 |
| (pins |
| R1-2 CON4-21)) |
| (net I1_7 |
| (pins |
| R2-2 CON4-9)) |
| (net I1_3 |
| (pins |
| R11-2 CON4-23)) |
| (net I_DSR |
| (pins |
| R12-2 CON4-11)) |
| (net I_CTS |
| (pins |
| R13-2 CON4-24)) |
| (net I_RI |
| (pins |
| R14-2 CON4-12)) |
| (net BA1_3 |
| (pins |
| CON1-15 U2-9)) |
| (net TXD |
| (pins |
| D1-A CON3-3)) |
| (net N01853 |
| (pins |
| U1-7 R1-1)) |
| (net N01906 |
| (pins |
| U1-5 R2-1)) |
| (net N01959 |
| (pins |
| U1-3 R3-1)) |
| (net N02012 |
| (pins |
| U1-1 R4-1)) |
| (net N02164 |
| (pins |
| U2-7 R11-1)) |
| (net N02168 |
| (pins |
| U2-3 R13-1)) |
| (net N02134 |
| (pins |
| U2-5 R12-1)) |
| (net N02160 |
| (pins |
| U2-1 R14-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| U1-8 U2-2 U1-15 U6-8 U1-13 U2-6 U1-2 U1-9 U7-8 |
| U2-4 U1-6 U1-4 U1-11 U2-8 CON3-5 CON4-25 CON4-13 C1-C |
| J2-1 CON1-18 CON1-19 CON1-20 CON1-21 CON1-22 CON1-23 CON1-24 CON1-25)) |
| (net STROBE |
| (pins |
| U6-1 CON1-1)) |
| (net D0 |
| (pins |
| CON1-2 U6-3)) |
| (net D1 |
| (pins |
| U6-4 CON1-3)) |
| (net DCD |
| (pins |
| J3-1 CON3-1)) |
| (net D2 |
| (pins |
| CON1-4 U6-6)) |
| (net RXD |
| (pins |
| J3-2 CON3-2)) |
| (net D3 |
| (pins |
| CON1-5 U7-1)) |
| (net +12V |
| (property |
| (nettype S)) |
| (pins |
| U6-9 U7-9 CON4-1 J1-1))) |
| ) |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.asc |
|---|
| 0,0 → 1,151 |
| *PADS-PCB* |
| *PART* |
| C1 ELYT@CE050X13 |
| CON1 DB25M@CANNON25M_90 |
| CON3 DB9F@CANNON9F_90 |
| CON4 DB25F@CANNON25F_90 |
| D1 D@DO41 |
| J1 JUMP1@JUMP1 |
| J2 JUMP1@JUMP1 |
| J3 JUMP2@JUMP2 |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 HOLE@HOLE_M3 |
| M5 HOLE@HOLE_M3 |
| M6 HOLE@HOLE_M3 |
| M7 HOLE@HOLE_M3 |
| R1 R@RL090 |
| R11 R@RL090 |
| R12 R@RL090 |
| R13 R@RL090 |
| R14 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| U1 DIP16@DIP16_300 |
| U2 DIP16@DIP16_300 |
| U6 DIP16@DIP16_300 |
| U7 DIP16@DIP16_300 |
| *NET* |
| *SIGNAL* RTS |
| CON3.7 U7.6 |
| *SIGNAL* DTR |
| CON3.4 U7.7 |
| *SIGNAL* RI |
| CON3.9 U2.15 |
| *SIGNAL* CTS |
| CON3.8 U2.13 |
| *SIGNAL* DSR |
| CON3.6 U2.11 |
| *SIGNAL* D4 |
| U7.2 CON1.6 |
| *SIGNAL* D6 |
| CON1.8 U7.4 |
| *SIGNAL* D7 |
| CON1.9 U7.5 |
| *SIGNAL* D5 |
| U7.3 CON1.7 |
| *SIGNAL* N21518 |
| U2.10 U2.12 U2.14 U2.16 D1.C C1.A |
| *SIGNAL* BA2_1 |
| CON1.14 U6.2 |
| *SIGNAL* BA2_2 |
| U6.5 CON1.16 |
| *SIGNAL* BA2_3 |
| CON1.17 U6.7 |
| *SIGNAL* BA1_6 |
| CON1.10 U1.10 |
| *SIGNAL* BA1_7 |
| CON1.11 U1.12 |
| *SIGNAL* BA1_5 |
| U1.14 CON1.12 |
| *SIGNAL* BA1_4 |
| U1.16 CON1.13 |
| *SIGNAL* O2_0 |
| U6.16 CON4.14 |
| *SIGNAL* O2_1 |
| U6.15 CON4.2 |
| *SIGNAL* O2_2 |
| U6.12 CON4.16 |
| *SIGNAL* O2_3 |
| U6.10 CON4.17 |
| *SIGNAL* O0_0 |
| U6.14 CON4.15 |
| *SIGNAL* O0_1 |
| U6.13 CON4.3 |
| *SIGNAL* O0_2 |
| U6.11 CON4.4 |
| *SIGNAL* O0_3 |
| U7.16 CON4.5 |
| *SIGNAL* O0_4 |
| U7.15 CON4.18 |
| *SIGNAL* O0_5 |
| U7.14 CON4.6 |
| *SIGNAL* O0_6 |
| U7.13 CON4.19 |
| *SIGNAL* O0_7 |
| U7.12 CON4.7 |
| *SIGNAL* O_RTS |
| U7.11 CON4.20 |
| *SIGNAL* O_DTR |
| U7.10 CON4.8 |
| *SIGNAL* I1_4 |
| R4.2 CON4.10 |
| *SIGNAL* I1_5 |
| R3.2 CON4.22 |
| *SIGNAL* I1_6 |
| R1.2 CON4.21 |
| *SIGNAL* I1_7 |
| R2.2 CON4.9 |
| *SIGNAL* I1_3 |
| R11.2 CON4.23 |
| *SIGNAL* I_DSR |
| R12.2 CON4.11 |
| *SIGNAL* I_CTS |
| R13.2 CON4.24 |
| *SIGNAL* I_RI |
| R14.2 CON4.12 |
| *SIGNAL* BA1_3 |
| CON1.15 U2.9 |
| *SIGNAL* TXD |
| D1.A CON3.3 |
| *SIGNAL* N01853 |
| U1.7 R1.1 |
| *SIGNAL* N01906 |
| U1.5 R2.1 |
| *SIGNAL* N01959 |
| U1.3 R3.1 |
| *SIGNAL* N02012 |
| U1.1 R4.1 |
| *SIGNAL* N02164 |
| U2.7 R11.1 |
| *SIGNAL* N02168 |
| U2.3 R13.1 |
| *SIGNAL* N02134 |
| U2.5 R12.1 |
| *SIGNAL* N02160 |
| U2.1 R14.1 |
| *SIGNAL* GND |
| U1.8 U2.2 U1.15 U6.8 U1.13 U2.6 U1.2 U1.9 |
| U7.8 U2.4 U1.6 U1.4 U1.11 U2.8 CON3.5 CON4.25 |
| CON4.13 C1.C J2.1 CON1.18 CON1.19 CON1.20 CON1.21 CON1.22 |
| CON1.23 CON1.24 CON1.25 |
| *SIGNAL* STROBE |
| U6.1 CON1.1 |
| *SIGNAL* D0 |
| CON1.2 U6.3 |
| *SIGNAL* D1 |
| U6.4 CON1.3 |
| *SIGNAL* DCD |
| J3.1 CON3.1 |
| *SIGNAL* D2 |
| CON1.4 U6.6 |
| *SIGNAL* RXD |
| J3.2 CON3.2 |
| *SIGNAL* D3 |
| CON1.5 U7.1 |
| *SIGNAL* +12V |
| U6.9 U7.9 CON4.1 J1.1 |
| *END* |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE01.eco |
|---|
| 0,0 → 1,15 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:18:27 2003 |
| *CHGPART* |
| CON4 DB25F@CANNON25F_90 DB25F@CANNON25F |
| CON1 DB25M@CANNON25M_90 DB25M@CANNON25M |
| CON3 DB9F@CANNON9F_90 DB9F@CANNON9F |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:38:47 2003 |
| *END* |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE01.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE02.asc |
|---|
| 0,0 → 1,9604 |
| !PADS-POWERPCB-V5.0-BASIC! DESIGN DATABASE ASCII FILE 1.0 |
| *PCB* GENERAL PARAMETERS OF THE PCB DESIGN |
| UNITS 0 2=Inches 1=Metric 0=Mils |
| USERGRID 381000 381000 Space between USER grid points |
| MAXIMUMLAYER 2 Maximum routing layer |
| WORKLEVEL 1 Level items will be created on |
| DISPLAYLEVEL 1 toggle for displaying working level last |
| LAYERPAIR 1 2 Layer pair used to route connection |
| VIAMODE T Type of via to use when routing between layers |
| LINEWIDTH 381000 Width items will be created with |
| TEXTSIZE 3810000 381000 Height and LineWidth text will be created with |
| JOBTIME 154 Amount of time spent on this PCB design |
| DOTGRID 38100000 38100000 Space between graphic dots |
| SCALE 9.745 Scale of window expansion |
| ORIGIN 381000000 381000000 User defined origin location |
| WINDOWCENTER 480140111 491602242 Point defining the center of the window |
| BACKUPTIME 20 Number of minutes between database backups |
| REAL WIDTH 381000 Widths greater then this are displayed real size |
| ALLSIGONOFF 1 All signal nets displayed on/off |
| REFNAMESIZE 3810000 381000 Height and LineWidth used by part ref. names |
| HIGHLIGHT 0 Highlight nets flag |
| JOBNAME SPINACE02.pcb |
| CONCOL 1 |
| FBGCOL 1 0 |
| HATCHGRID 381000 Copper pour hatching grid |
| TEARDROP 2713690 Teardrop tracks |
| THERLINEWID 571500 Copper pour thermal line width |
| PSVIAGRID 381000 381000 Push & Shove Via Grid |
| PADFILLWID 381000 CAM finger pad fill width |
| THERSMDWID 381000 Copper pour thermal line width for SMD |
| MINHATAREA 0 Minimum hatch area |
| HATCHMODE 0 Hatch generation mode |
| HATCHDISP 0 Hatch display flag |
| DRILLHOLE 228600 Drill hole checking spacing |
| MITRERADII 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |
| MITRETYPE 1 Mitring type |
| HATCHRAD 1.000000 Hatch outline smoothing radius |
| MITREANG 180 180 180 180 180 180 90 |
| HATCHANG 0 Hatch angle |
| THERFLAGS 0 Copper pour thermal line flags |
| DRLOVERSIZE 114300 Drill oversize for plated holes |
| PLANERAD 0.000000 Plane outline smoothing radius |
| PLANEFLAGS OUTLINE THERMALS Y Y Y N N Y Y Y N N Y Y N Y Y N N Plane and Test Points flags |
| COMPHEIGHT 0 Board Top Component Height Restriction |
| KPTHATCHGRID 3810000 Copper pour hatching grid |
| BOTCMPHEIGHT 0 Board Bottom Component Height Restriction |
| FANOUTGRID 952500 952500 Fanout grid |
| FANOUTLENGTH 9525000 Maximum fanout length |
| ROUTERFLAGS 83879441 Autorouter specific flags |
| VERIFYFLAGS 1861 Verify Design flags |
| FABCHKFLAGS 3967 Fabrication checks flags |
| ATMAXSIZE 114300 Acid Traps Maximum Size |
| ATMAXANGLE 161999820 Acid Traps Maximum Angle |
| SLMINCOPPER 114300 Slivers Minimum Copper |
| SLMINMASK 114300 Slivers Minimum Mask |
| STMINCLEAR 5 Starved Thermal Minimum Clearance |
| STMINSPOKES 4 Starved Thermal Minimum Spokes |
| TPMINWIDTH 114300 Minimum Trace Width |
| TPMINSIZE 114300 Mimimum Pad Size |
| SSMINGAP 114300 Silk Screen Over Pads Minimum Gap |
| SBMINGAP 114300 Solder Bridges Minimum Gap |
| SBLAYER 1 Solder Bridges Layer |
| ARPTOM 114300 Pad To Mask Annular Ring |
| ARPTOMLAYER 1 Pad To Mask Annular Ring Layer |
| ARDTOM 114300 Drill To Mask Annular Ring |
| ARDTOMLAYER 1 Drill To Mask Annular Ring Layer |
| ARDTOP 114300 Drill To Pad Annular Ring |
| ARDTOPLAYER 0 Drill To Pad Annular Ring Layer |
| PLNSEPGAP 228600 Plane separation gap |
| IDFSHAPELAY 0 IDF shapes layer |
| TEARDROPDATA 90 90 |
| *REUSE* |
| *REMARK* TYPE TYPENAME |
| *REMARK* TIMESTAMP SECONDS |
| *REMARK* PART NAMING PARTNAMING |
| *REMARK* PART NAME |
| *REMARK* NET NAMING NETNAMING |
| *REMARK* NET MERGE NAME |
| *REMARK* REUSE INSTANCENM PARTNAMING NETNAMING X Y ORI GLUED |
| *TEXT* FREE TEXT |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST .REUSE. INSTANCENM |
| *LINES* LINES ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES TEXT SIGSTR |
| *REMARK* .REUSE. INSTANCE RSIGNAL |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| DRW83515280 BOARD 7620000 114300000 1 |
| CLOSED 5 381000 0 |
| 0 3048000 |
| 153924000 3048000 |
| 153924000 -106680000 |
| 0 -106680000 |
| 0 3048000 |
| DIM98152102 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 2048 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 2048 |
| -153924000 0 |
| -153923000 0 |
| ARWLN1 2 381000 24 2048 |
| 0 -15240000 |
| -69324682 -15240000 |
| ARWHD1 4 381000 24 2048 |
| 0 -15240000 |
| -3810000 -16192500 |
| -3810000 -14287500 |
| 0 -15240000 |
| ARWLN2 2 381000 24 2048 |
| -153924000 -15240000 |
| -84599318 -15240000 |
| ARWHD2 4 381000 24 2048 |
| -153924000 -15240000 |
| -150114000 -14287500 |
| -150114000 -16192500 |
| -153924000 -15240000 |
| EXTLN1 2 381000 24 2048 |
| 0 -1905000 |
| 0 -17145000 |
| EXTLN2 2 381000 24 2048 |
| -153924000 -1905000 |
| -153924000 -17145000 |
| -83456318 -16668750 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 102.6mm |
| DIM58176572 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 4096 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 4096 |
| 0 109728000 |
| 1000 109728000 |
| ARWLN1 2 381000 24 4096 |
| 20955000 0 |
| 20955000 52292250 |
| ARWHD1 4 381000 24 4096 |
| 20955000 0 |
| 20002500 3810000 |
| 21907500 3810000 |
| 20955000 0 |
| ARWLN2 2 381000 24 4096 |
| 20955000 109728000 |
| 20955000 57435750 |
| ARWHD2 4 381000 24 4096 |
| 20955000 109728000 |
| 21907500 105918000 |
| 20002500 105918000 |
| 20955000 109728000 |
| EXTLN1 2 381000 24 4096 |
| 1905000 0 |
| 22860000 0 |
| EXTLN2 2 381000 24 4096 |
| 1905000 109728000 |
| 22860000 109728000 |
| 15023523 53435250 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 73.2mm |
| *CLUSTER* ITEMS |
| *REMARK* NAME XLOC YLOC PARENTID CLUSTERID CHILD_NUM ATTRIBUTE ATT2 BROID |
| *VIA* ITEMS |
| *REMARK* NAME DRILL STACKLINES [DRILL START] [DRILL END] |
| *REMARK* LEVEL SIZE SHAPE [INNER DIAMETER] |
| JMPVIA_AAAAB 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| JMPVIA_AAAAA 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| STANDARDVIA 1409700 3 |
| -2 2095500 R |
| -1 2095500 R |
| 0 2095500 R |
| *JUMPER* |
| *REMARK* NAME FLAGS MINLEN MAXLEN LENINCR LABELS PADSTACKS |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| JMP1 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| JMP2 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| *PARTDECAL* ITEMS |
| *REMARK* NAME ORIX ORIY PIECES TERMINALS STACKS TEXT LABELS |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* PIECETYPE CORNERS WIDTH LEVEL PINNUM |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* T XLOC YLOC NMXLOC NMYLOC |
| *REMARK* PAD PIN STACKLINES |
| *REMARK* LEVEL SIZE SHAPE IDIA DRILL [PLATED] |
| *REMARK* LEVEL SIZE SHAPE FINORI FINLENGTH FINOFFSET DRILL [PLATED] |
| ELYTA I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1028700 1676400 |
| -3864408 1676400 |
| -4169208 1371600 |
| -4169208 -1371600 |
| -3864408 -1676400 |
| -1028700 -1676400 |
| OPEN 4 300000 0 |
| 1028700 1676400 |
| 4076700 1676400 |
| 4076700 -1676400 |
| 1028700 -1676400 |
| -5528803 -670722 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2118500 2430789 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -1990311 6609732 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2400300 0 -2512500 -600000 |
| T2400300 0 2107500 -585000 |
| PAD 0 5 |
| -2 2476500 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 2705100 S |
| 23 2324100 S |
| ELYTB I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1333500 2362200 |
| -3619500 2362200 |
| -3924300 2057400 |
| -3924300 -2057400 |
| -3619500 -2362200 |
| -1333500 -2362200 |
| OPEN 4 300000 0 |
| 1333500 2362200 |
| 3924300 2362200 |
| 3924300 -2362200 |
| 1333500 -2362200 |
| -5232429 -592116 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2274039 10133936 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2274039 6015735 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2476500 0 -2588700 -600000 |
| T2476500 0 2183700 -585000 |
| PAD 0 5 |
| -2 2095500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 2324100 RF 90.000 4038600 0 |
| 23 1943100 RF 90.000 3657600 0 |
| ELYTC I 0 0 2 2 1 2 2 |
| OPEN 6 300000 0 |
| -2095500 2667000 |
| -5524500 2667000 |
| -5829300 2377937 |
| -5829300 -2358906 |
| -5524500 -2667000 |
| -2095500 -2667000 |
| OPEN 4 300000 0 |
| 2095500 2667000 |
| 5829300 2667000 |
| 5829300 -2667000 |
| 2095500 -2667000 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -7281389 -522186 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2345177 3367048 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2475293 7574104 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-3810000 0 -3922200 -600000 |
| T3810000 0 3517200 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4038600 0 |
| 23 3086100 RF 90.000 3657600 0 |
| ELYTD I 0 0 2 2 1 2 2 |
| OPEN 6 299847 0 |
| -3048000 3505200 |
| -6477000 3505200 |
| -6858000 3124200 |
| -6858000 -3124200 |
| -6477000 -3505200 |
| -2971800 -3505200 |
| OPEN 4 300000 0 |
| 3048000 3505200 |
| 6858000 3505200 |
| 6858000 -3505200 |
| 3048000 -3505200 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -8302901 -620739 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2122481 4358106 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2170638 8692198 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-4800600 0 -4912800 -600000 |
| T4800600 0 4507800 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 4572000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4800600 0 |
| 23 3086100 RF 90.000 4419600 0 |
| CE020X5 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4000500 0 |
| -4000500 0 |
| -5257847 -629938 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE025X6 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4953000 0 |
| -4953000 0 |
| -6430981 -671836 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 6477000 0 |
| -6477000 0 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 8001000 0 |
| -8001000 0 |
| -9946160 -766682 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X13 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 10287000 0 |
| -10287000 0 |
| -12356954 -891778 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE075X16 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 12382500 0 |
| -12382500 0 |
| -14624835 -1147354 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2731444 18839171 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2449944 13490664 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1714500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE075X18 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 13982700 0 |
| -13982700 0 |
| -16300121 -922964 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2234097 14901313 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| VALUE -2157651 20558301 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1524000 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE020X5/L I 0 0 3 2 2 1 2 |
| CLOSED 5 299847 0 |
| -4000500 -2286000 |
| 3848100 -2286000 |
| 3848100 -18554700 |
| -4000500 -18554700 |
| -4000500 -2286000 |
| OPEN 2 299847 0 |
| -1409700 -1524000 |
| -1409700 -2286000 |
| OPEN 2 299847 0 |
| 1524000 -1524000 |
| 1524000 -2286000 |
| -4000500 -838200 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CE025X6/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -4914900 -2286000 |
| 4914900 -2286000 |
| 4914900 -18478500 |
| -4914900 -18478500 |
| -4914900 -2286000 |
| OPEN 3 300000 0 |
| -1828800 -1524000 |
| -1866900 -2286000 |
| -1943100 -2247900 |
| OPEN 2 300000 0 |
| 1905000 -1524000 |
| 1905000 -2286000 |
| -4648200 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -6400800 -2286000 |
| 6438900 -2286000 |
| 6438900 -18554700 |
| -6400800 -18554700 |
| -6400800 -2286000 |
| OPEN 2 300000 0 |
| -2590800 -1524000 |
| -2590800 -2286000 |
| OPEN 2 300000 0 |
| 2705100 -1524000 |
| 2705100 -2286000 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -8001000 -2667000 |
| 7924800 -2667000 |
| 7924800 -25984200 |
| -8001000 -25984200 |
| -8001000 -2667000 |
| OPEN 2 300000 0 |
| -3810000 -1524000 |
| -3810000 -2667000 |
| OPEN 2 300000 0 |
| 3810000 -1524000 |
| 3810000 -2667000 |
| -6591300 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CANNON25M M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 1 |
| -26670000 -3048000 |
| -26670000 3467100 |
| 26670000 3467100 |
| 26670000 -3238500 |
| -2819400 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1905000 8229600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1828800 4305300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 0 -24750000 0 |
| T-20625000 0 -20625000 0 |
| T-16500000 0 -16500000 0 |
| T-12375000 0 -12375000 0 |
| T-8250000 0 -8250000 0 |
| T-4125000 0 -4125000 0 |
| T0 0 0 0 |
| T4125000 0 4125000 0 |
| T8250000 0 8250000 0 |
| T12375000 0 12375000 0 |
| T16500000 0 16500000 0 |
| T20625000 0 20625000 0 |
| T24750000 0 24750000 0 |
| T-22687500 0 -22687500 0 |
| T-18562500 0 -18562500 0 |
| T-14437500 0 -14437500 0 |
| T-10312500 0 -10312500 0 |
| T-6187500 0 -6187500 0 |
| T-2062500 0 -2062500 0 |
| T2062500 0 2062500 0 |
| T6187500 0 6187500 0 |
| T10312500 0 10312500 0 |
| T14437500 0 14437500 0 |
| T18562500 0 18562500 0 |
| T22687500 0 22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| CANNON9F M 8520000 -2130000 1 11 3 1 2 |
| CLOSED 5 300000 0 |
| -23400000 9450000 |
| 23400000 9450000 |
| 23400000 -9450000 |
| -23400000 -9450000 |
| -23400000 9450000 |
| -2445000 -7365000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -4725000 14160000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -4650000 10275000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90 M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -13500000 |
| -23400000 -13500000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -13500000 |
| -13200000 -23400000 |
| 13200000 -23400000 |
| 13200000 -13500000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90/L M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -17100000 |
| -23400000 -17100000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -17100000 |
| -13200000 -27300000 |
| 13200000 -27300000 |
| 13200000 -17100000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F/T I 8520000 -2130000 1 11 8 1 2 |
| OPEN 4 300000 1 |
| -10668000 -3048000 |
| -10668000 3810000 |
| 10668000 3810000 |
| 10668000 -3048000 |
| -3467100 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1866900 8572500 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1866900 4533900 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10934700 381000 -10934700 381000 |
| T10706100 -38100 10706100 -38100 |
| PAD 0 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 1 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 2 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 3 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 4 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 5 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 10 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| PAD 11 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| CANNON25F M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T24750000 1905000 24750000 1905000 |
| T20625000 1905000 20625000 1905000 |
| T16500000 1905000 16500000 1905000 |
| T12375000 1905000 12375000 1905000 |
| T8250000 1905000 8250000 1905000 |
| T4125000 1905000 4125000 1905000 |
| T0 1905000 0 1905000 |
| T-4125000 1905000 -4125000 1905000 |
| T-8250000 1905000 -8250000 1905000 |
| T-12375000 1905000 -12375000 1905000 |
| T-16500000 1905000 -16500000 1905000 |
| T-20625000 1905000 -20625000 1905000 |
| T-24750000 1905000 -24750000 1905000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 0 |
| -26670000 -3048000 |
| -26670000 3581400 |
| 26670000 3581400 |
| 26670000 -3048000 |
| -2971800 -5905500 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2133600 4610100 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2324100 8610600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 0 24750000 0 |
| T20625000 0 20625000 0 |
| T16500000 0 16500000 0 |
| T12375000 0 12375000 0 |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T-12375000 0 -12375000 0 |
| T-16500000 0 -16500000 0 |
| T-20625000 0 -20625000 0 |
| T-24750000 0 -24750000 0 |
| T22687500 0 22687500 0 |
| T18562500 0 18562500 0 |
| T14437500 0 14437500 0 |
| T10312500 0 10312500 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10312500 0 -10312500 0 |
| T-14437500 0 -14437500 0 |
| T-18562500 0 -18562500 0 |
| T-22687500 0 -22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| SOD87 I 0 0 2 2 1 1 2 |
| OPEN 4 304800 0 |
| 1333500 1524000 |
| 3429000 1524000 |
| 3429000 -1524000 |
| 1333500 -1524000 |
| OPEN 6 304800 0 |
| -1333500 1524000 |
| -3124200 1524000 |
| -3505200 1219200 |
| -3505200 -1219200 |
| -3124200 -1524000 |
| -1333500 -1524000 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -2019300 2247900 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2057400 6515100 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2286000 0 -2438400 -495300 |
| T2286000 0 1981200 -571500 |
| PAD 0 5 |
| -2 1524000 RF 90.000 2286000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1752600 RF 90.000 2514600 0 |
| 23 1371600 RF 90.000 2133600 0 |
| DO201 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -7050000 2400000 |
| -5550000 3900000 |
| 7050000 3900000 |
| 7050000 -3900000 |
| -5550000 -3900000 |
| -7050000 -2400000 |
| -7050000 2400000 |
| OPEN 2 300000 0 |
| -5448300 3886200 |
| -5448300 -3886200 |
| OPEN 2 304800 1 |
| -7050000 0 |
| -8250000 0 |
| OPEN 2 304800 1 |
| 7050000 0 |
| 8250000 0 |
| -9486900 2819400 0.000 26 3000000 300000 N LEFT DOWN 0 |
| K |
| VALUE -2895600 4762500 0.000 1 3000000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -3276600 10096500 0.000 1 3000000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 3924300 R 1981200 |
| -1 3924300 R |
| 0 3924300 R |
| 21 4152900 R |
| 28 4152900 R |
| DO41 M 0 0 2 2 1 1 2 |
| CLOSED 7 300000 0 |
| -5250000 1500000 |
| -4500000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -4500000 -2250000 |
| -5250000 -1500000 |
| -5250000 1500000 |
| OPEN 2 300000 0 |
| -4457700 2247900 |
| -4457700 -2171700 |
| -6019800 -3505200 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| MELF I 0 0 2 2 1 2 2 |
| OPEN 6 304800 0 |
| -2667000 2400300 |
| -4762500 2400300 |
| -5143500 2019300 |
| -5143500 -2019300 |
| -4762500 -2400300 |
| -2667000 -2400300 |
| OPEN 4 304800 0 |
| 2667000 2400300 |
| 5143500 2400300 |
| 5143500 -2400300 |
| 2667000 -2400300 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -6705600 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| ¨K |
| VALUE -1981200 10591800 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2057400 4876800 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3733800 0 -3886200 -495300 |
| T3733800 0 3429000 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 4000500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 4229100 0 |
| 23 1752600 RF 90.000 3848100 0 |
| MINIMELF I 0 0 2 2 1 1 2 |
| OPEN 6 304800 0 |
| -1524000 1905000 |
| -3810000 1905000 |
| -4114800 1600200 |
| -4114800 -1600200 |
| -3810000 -1905000 |
| -1524000 -1905000 |
| OPEN 4 304800 0 |
| 1524000 1905000 |
| 4000500 1905000 |
| 4000500 -1905000 |
| 1524000 -1905000 |
| -5372100 -914400 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -1943100 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2095500 2476500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2781300 -495300 |
| T2628900 0 2324100 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 2857500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 3086100 0 |
| 23 1752600 RF 90.000 2705100 0 |
| DO35 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -2250000 1050000 |
| -1800000 1500000 |
| 2250000 1500000 |
| 2250000 -1500000 |
| -1800000 -1500000 |
| -2250000 -1050000 |
| -2250000 1050000 |
| OPEN 2 300000 0 |
| -1524000 1485900 |
| -1524000 -1409700 |
| OPEN 2 304800 1 |
| -2250000 0 |
| -3300000 0 |
| OPEN 2 304800 1 |
| 2250000 0 |
| 3300000 0 |
| -3750000 1500000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1790700 5981700 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1981200 2019300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-4762500 0 -4912500 -600000 |
| T4762500 0 4462500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| DS040 M 0 0 2 2 1 1 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| OPEN 2 300000 0 |
| 1524000 0 |
| -1524000 0 |
| -5181600 -723900 0.000 26 2250000 300000 N LEFT DOWN 0 |
| K |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| TO220AC M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 2925000 -8175000 |
| -4575000 -8175000 |
| -4575000 8325000 |
| 2925000 8325000 |
| 2925000 -8175000 |
| OPEN 2 1200000 0 |
| -4575000 -7725000 |
| -4575000 7875000 |
| -240000 -7170000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -3000000 9450000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2925000 13575000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-75000 3885000 -417900 3389700 |
| T-75000 -3735000 -303600 -4268400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| TO220AB M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 3000000 -8250000 |
| -4500000 -8250000 |
| -4500000 8250000 |
| 3000000 8250000 |
| 3000000 -8250000 |
| OPEN 2 1200000 0 |
| -4500000 -7800000 |
| -4500000 7800000 |
| -190500 -5143500 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -2400000 13425000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2775000 9300000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T0 1905000 -342900 1409700 |
| T0 -1905000 -228600 -2438400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| JUMP1 I 0 0 1 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -1905000 |
| -1905000 -1905000 |
| -1905000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP1_90 I 0 0 2 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -6096000 |
| -1905000 -6096000 |
| -1905000 1905000 |
| OPEN 2 300000 0 |
| -1905000 -1905000 |
| 1905000 -1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -1905000 |
| -3810000 -1905000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2_90 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -6096000 |
| -3810000 -6096000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| ARK050X2 M 3810000 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -7500000 6750000 |
| 7500000 6750000 |
| 7500000 -6750000 |
| -7500000 -6750000 |
| -7500000 6750000 |
| VALUE -2250000 7500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 11250000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -4038600 -495300 |
| T3810000 0 3810000 0 |
| PAD 0 5 |
| -2 2857500 S 1524000 |
| -1 2857500 S |
| 0 2857500 S |
| 21 3086100 S |
| 28 3086100 S |
| PAD 2 5 |
| -2 2857500 R 1524000 |
| -1 2857500 R |
| 0 2857500 R |
| 21 3086100 R |
| 28 3086100 R |
| CROSS I 0 0 10 1 1 0 2 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 190500 |
| OPEN 2 266700 0 |
| 0 0 |
| 190500 0 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 -190500 |
| OPEN 2 266700 0 |
| 0 0 |
| -190500 0 |
| OPEN 2 266700 0 |
| 571500 0 |
| 2476500 0 |
| OPEN 2 266700 0 |
| 0 -571500 |
| 0 -1866900 |
| OPEN 2 266700 0 |
| 0 571500 |
| 0 2286000 |
| OPEN 2 266700 0 |
| -2286000 0 |
| -571500 0 |
| CIRCLE 2 266700 0 |
| 0 -1143000 |
| 0 1143000 |
| CIRCLE 2 266700 0 |
| 0 -762000 |
| 0 762000 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 3 |
| -2 0 R 76200 |
| -1 0 R |
| 0 0 R |
| HOLE_M3 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 9000000 R 4800000 |
| -1 9000000 R |
| 0 9000000 R |
| 21 9225000 R |
| 28 9225000 R |
| HOLE_M4 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 13500000 R 6300000 |
| -1 13500000 R |
| 0 13500000 R |
| 21 13725000 R |
| 28 13725000 R |
| HOLE_M2 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| T0 0 0 0 |
| PAD 0 5 |
| -2 6750000 R 3150000 |
| -1 6750000 R |
| 0 6750000 R |
| 21 6975000 R |
| 28 6975000 R |
| R0805 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -609600 1333500 |
| -2590800 1333500 |
| -2590800 -1333500 |
| -609600 -1333500 |
| OPEN 4 304800 0 |
| 609600 1333500 |
| 2590800 1333500 |
| 2590800 -1333500 |
| 609600 -1333500 |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-1447800 0 -1333500 -571500 |
| T1447800 0 1481570 -571500 |
| PAD 0 5 |
| -2 1485900 RF 90.000 1943100 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1714500 RF 90.000 2171700 0 |
| 23 1333500 RF 90.000 1790700 0 |
| R0603 I 0 0 2 2 1 0 2 |
| OPEN 4 300000 0 |
| -457200 1143000 |
| -2209800 1143000 |
| -2209800 -1143000 |
| -457200 -1143000 |
| OPEN 4 300000 0 |
| 457200 1143000 |
| 2209800 1143000 |
| 2209800 -1143000 |
| 457200 -1143000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-1143000 0 -1333500 -571500 |
| T1143000 0 838200 -571500 |
| PAD 0 5 |
| -2 1333500 RF 90.000 1524000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1562100 RF 90.000 1752600 0 |
| 23 1181100 RF 90.000 1371600 0 |
| R1206 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1295400 1714500 |
| -3429000 1714500 |
| -3429000 -1714500 |
| -1295400 -1714500 |
| OPEN 4 304800 0 |
| 1295400 1714500 |
| 3429000 1714500 |
| 3429000 -1714500 |
| 1295400 -1714500 |
| VALUE -2247900 2324100 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2171700 0 -2283900 -600000 |
| T2171700 0 1878900 -585000 |
| PAD 0 5 |
| -2 1638300 RF 90.000 2667000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1866900 RF 90.000 2895600 0 |
| 23 1409700 RF 90.000 2514600 0 |
| RS025 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 495000 0 |
| -4305000 0 |
| VALUE -2250000 2700000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 6600000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2055000 -600000 |
| T1905000 0 1605000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL090 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -5250000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -5250000 -2250000 |
| -5250000 2250000 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL140 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -9000000 3450000 |
| 9000000 3450000 |
| 9000000 -3450000 |
| -9000000 -3450000 |
| -9000000 3450000 |
| VALUE -1800000 4050000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1950000 8100000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RS040 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| R1812 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1905000 3048000 |
| -4876800 3048000 |
| -4876800 -3048000 |
| -1905000 -3048000 |
| OPEN 4 304800 0 |
| 1905000 3048000 |
| 4876800 3048000 |
| 4876800 -3048000 |
| 1905000 -3048000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2171700 6286500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3543300 0 -3429000 -571500 |
| T3543300 0 3577070 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 5334000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2095500 RF 90.000 5524500 0 |
| 23 1714500 RF 90.000 5181600 0 |
| DIP16_300 I 0 0 1 16 2 0 2 |
| CLOSED 9 300000 0 |
| -3810000 15240000 |
| -1143000 15240000 |
| -1143000 12954000 |
| 1143000 12954000 |
| 1143000 15240000 |
| 3810000 15240000 |
| 3810000 -15240000 |
| -3810000 -15240000 |
| -3810000 15240000 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| T-5715000 13335000 -5715000 13335000 |
| T-5715000 9525000 -5715000 9525000 |
| T-5715000 5715000 -5715000 5715000 |
| T-5715000 1905000 -5715000 1905000 |
| T-5715000 -1905000 -5715000 -1905000 |
| T-5715000 -5715000 -5715000 -5715000 |
| T-5715000 -9525000 -5715000 -9525000 |
| T-5715000 -13335000 -5715000 -13335000 |
| T5715000 -13335000 5715000 -13335000 |
| T5715000 -9525000 5715000 -9525000 |
| T5715000 -5715000 5715000 -5715000 |
| T5715000 -1905000 5715000 -1905000 |
| T5715000 1905000 5715000 1905000 |
| T5715000 5715000 5715000 5715000 |
| T5715000 9525000 5715000 9525000 |
| T5715000 13335000 5715000 13335000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2514600 R |
| 28 2514600 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2514600 S |
| 28 2514600 S |
| *PARTTYPE* ITEMS |
| *REMARK* NAME DECALNM UNITS TYPE GATES SIGPINS PINNMS FLAGS ECO |
| *REMARK* G/S SWAPTYPE PINS |
| *REMARK* PIN.SWAPTYPE.PINTYPE.FUNCNAME |
| *REMARK* SIGPIN PIN WIDTH SIGNAME |
| ELYT ELYTA:ELYTB:ELYTC:ELYTD:CE020X5:CE025X6:CE035X8:CE050X10:CE050X13:CE075X16:CE075X18:CE020X5/L:CE025X6/L:CE035X8/L:CE050X10/L I CAP 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| A C |
| DB25M CANNON25M:CANNON25M_90:CANNON25M_90/L:CANNON25M/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| DB9F CANNON9F:CANNON9F_90:CANNON9F_90/L:CANNON9F/T I CON 1 0 0 0 Y |
| G 0 11 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U |
| DB25F CANNON25F:CANNON25F_90:CANNON25F_90/L:CANNON25F/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| D SOD87:DO201:DO41:MELF:MINIMELF:DO35:DS040:TO220AC:TO220AB I DIO 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| C A |
| JUMP1 JUMP1:JUMP1_90 I CON 1 0 0 0 Y |
| G 0 1 |
| 1.0.Z |
| JUMP2 JUMP2:JUMP2_90:ARK050X2 I CON 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| CROSS CROSS I MEC 0 0 0 0 Y |
| HOLE HOLE_M3:HOLE_M4:HOLE_M2 I MEC 0 0 0 0 Y |
| R R0805:R0603:R1206:RS025:RL090:RL140:RS040:R1812 I RES 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| DIP16 DIP16_300 I DIP 1 0 0 0 Y |
| G 0 16 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U |
| *PART* ITEMS |
| *REMARK* REFNM PTYPENM X Y ORI GLUE MIRROR ALT CLSTID CLSTATTR BROTHERID LABELS |
| *REMARK* .REUSE. INSTANCE RPART |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| C1 ELYT 128016000 103632000 270.000 U N 8 -1 0 -1 2 |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| CON1 DB25M 147447000 62484000 90.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| CON3 DB9F 53721000 103632000 180.000 U N 1 -1 0 -1 2 |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| CON4 DB25F 21717000 62484000 270.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| D1 D 81534000 99822000 270.000 U N 2 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J1 JUMP1 105003600 39319200 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J2 JUMP1 105270300 28041600 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J3 JUMP2 47244000 94107000 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| M1 CROSS 3810000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M2 CROSS 167640000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M3 CROSS 167640000 121920000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M4 HOLE 16764000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M5 HOLE 152400000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M6 HOLE 152400000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M7 HOLE 16764000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| R1 R 98298000 60960000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R11 R 71628000 68580000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R12 R 71628000 74676000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R13 R 71628000 80772000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R14 R 71628000 86868000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R2 R 98298000 66294000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R3 R 98298000 71628000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R4 R 98298000 76962000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| U1 DIP16 127673100 71475600 0.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U2 DIP16 100584000 99822000 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U6 DIP16 47510700 29908500 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U7 DIP16 80543400 30175200 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| *ROUTE* |
| *REMARK* *SIGNAL* SIGNAME SIGFLAG COLOR |
| *REMARK* REFNM.PIN .REUSE. INSTANCE RSIG REFNM.PIN .REUSE. INSTANCE RSIG |
| *REMARK* XLOC YLOC LAYER SEGMENTWIDTH FLAGS [ARCDIR/VIANAME] [TEARDROP [P WID LEN [FLAGS]] [N WID LEN [FLAGS]]] [JMPNM JMPFLAG] REUSE INST RSIG |
| *SIGNAL* RTS 0 -2 |
| CON3.7 U7.6 |
| 51658500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 51658500 98074500 1 609600 1536 |
| 55626000 94107000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP1 S |
| 118872000 43434000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 116141280 40703280 1 609600 3584 |
| 116141280 34925345 1 609600 3584 |
| 102856735 21640800 1 609600 3584 |
| 89077800 21640800 1 609600 3584 |
| 86258400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DTR 0 -2 |
| CON3.4 U7.7 |
| 57846000 101502000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 60837528 98510472 1 609600 1536 |
| 60837528 98420472 1 609600 1536 |
| 63627000 95631000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP2 E |
| 113538000 42672000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 113538000 33722985 1 609600 3584 |
| 102446415 22631400 1 609600 3584 |
| 91897200 22631400 1 609600 3584 |
| 90068400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RI 0 -2 |
| CON3.9 U2.15 |
| 59908500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62906700 105762000 1 609600 1536 |
| 70104000 98564700 1 609600 1536 |
| 78714600 98564700 1 609600 1536 |
| 80962500 100812600 1 609600 1536 |
| 86525100 100812600 1 609600 1536 |
| 91059000 105346500 1 609600 1536 |
| 91059000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* CTS 0 -2 |
| CON3.8 U2.13 |
| 55783500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55783500 107632498 1 609600 1536 |
| 57498002 109347000 1 609600 1536 |
| 94869000 109347000 1 609600 1536 |
| 98679000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DSR 0 -2 |
| CON3.6 U2.11 |
| 47533500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52109100 110337600 1 609600 1536 |
| 101498400 110337600 1 609600 1536 |
| 106299000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D4 0 -2 |
| U7.2 CON1.6 |
| 71018400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 77800200 17678400 1 609600 1536 |
| 104636400 17678400 1 609600 1536 |
| 145317000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D6 0 -2 |
| CON1.8 U7.4 |
| 145317000 66609000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139257300 60549300 1 609600 1536 |
| 139257300 55239525 1 609600 1536 |
| 103677375 19659600 1 609600 1536 |
| 83439000 19659600 1 609600 1536 |
| 78638400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D7 0 -2 |
| CON1.9 U7.5 |
| 145317000 70734000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138266700 63683700 1 609600 1536 |
| 138266700 55649845 1 609600 1536 |
| 103267055 20650200 1 609600 1536 |
| 86258400 20650200 1 609600 1536 |
| 82448400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D5 0 -2 |
| U7.3 CON1.7 |
| 74828400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80619600 18669000 1 609600 1536 |
| 104087695 18669000 1 609600 1536 |
| 140247900 54829205 1 609600 1536 |
| 140247900 57414900 1 609600 1536 |
| 145317000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N21518 0 -2 |
| D1.C U2.16 |
| 81534000 106489500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 83896200 106489500 1 609600 1536 |
| 84848700 105537000 1 609600 1536 |
| 87249000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.16 U2.14 |
| 87249000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87249000 107213398 1 609600 1536 |
| 88392002 108356400 1 609600 1536 |
| 93725998 108356400 1 609600 1536 |
| 94869000 107213398 1 609600 1536 |
| 94869000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.14 U2.12 |
| 94869000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 96697800 103708200 1 609600 1536 |
| 100660200 103708200 1 609600 1536 |
| 102489000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.12 U2.10 |
| 102489000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 104317800 103708200 1 609600 1536 |
| 108280200 103708200 1 609600 1536 |
| 110109000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.10 C1.A |
| 110109000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 111937800 103708200 1 609600 1536 |
| 120396000 103708200 1 609600 1536 |
| 124129800 107442000 1 609600 1536 |
| 128016000 107442000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_1 0 -2 |
| CON1.14 U6.2 |
| 149577000 39796500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 39796500 1 609600 1536 |
| 114175259 10744200 1 609600 1536 |
| 51435000 10744200 1 609600 1536 |
| 37985700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_2 0 -2 |
| U6.5 CON1.16 |
| 49415700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 59893200 13716000 1 609600 1536 |
| 108235479 13716000 1 609600 1536 |
| 142565979 48046500 1 609600 1536 |
| 149577000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_3 0 -2 |
| CON1.17 U6.7 |
| 149577000 52171500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143889139 52171500 1 609600 1536 |
| 107414839 15697200 1 609600 1536 |
| 65532000 15697200 1 609600 1536 |
| 57035700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_6 0 -2 |
| CON1.10 U1.10 |
| 145317000 74859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139293600 68835600 1 609600 1536 |
| 139293600 67856100 1 609600 1536 |
| 133388100 61950600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_7 0 -2 |
| CON1.11 U1.12 |
| 145317000 78984000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143485500 77152500 1 609600 1536 |
| 140970000 77152500 1 609600 1536 |
| 133388100 69570600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_5 0 -2 |
| U1.14 CON1.12 |
| 133388100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 136283700 80086200 1 609600 1536 |
| 142294200 80086200 1 609600 1536 |
| 145317000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_4 0 -2 |
| U1.16 CON1.13 |
| 133388100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138036300 84810600 1 609600 1536 |
| 140459700 87234000 1 609600 1536 |
| 145317000 87234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_0 0 -2 |
| U6.16 CON4.14 |
| 34175700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 30002700 39796500 1 609600 1536 |
| 19587000 39796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_1 0 -2 |
| U6.15 CON4.2 |
| 37985700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 31750200 41859000 1 609600 1536 |
| 23622000 41859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_2 0 -2 |
| U6.12 CON4.16 |
| 49415700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 36992700 48046500 1 609600 1536 |
| 19587000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_3 0 -2 |
| U6.10 CON4.17 |
| 57035700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 40487700 52171500 1 609600 1536 |
| 19587000 52171500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_0 0 -2 |
| U6.14 CON4.15 |
| 41795700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 33497700 43921500 1 609600 1536 |
| 19587000 43921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_1 0 -2 |
| U6.13 CON4.3 |
| 45605700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 35245200 45984000 1 609600 1536 |
| 23622000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_2 0 -2 |
| U6.11 CON4.4 |
| 53225700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 38740200 50109000 1 609600 1536 |
| 23622000 50109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_3 0 -2 |
| U7.16 CON4.5 |
| 67208400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48864600 54234000 1 609600 1536 |
| 23622000 54234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_4 0 -2 |
| U7.15 CON4.18 |
| 71018400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 50612100 56296500 1 609600 1536 |
| 19587000 56296500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_5 0 -2 |
| U7.14 CON4.6 |
| 74828400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52359600 58359000 1 609600 1536 |
| 23622000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_6 0 -2 |
| U7.13 CON4.19 |
| 78638400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55168800 59359800 1 609600 1536 |
| 25488900 59359800 1 609600 1536 |
| 24427200 60421500 1 609600 1536 |
| 19587000 60421500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_7 0 -2 |
| U7.12 CON4.7 |
| 82448400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57988200 60350400 1 609600 1536 |
| 27622500 60350400 1 609600 1536 |
| 25488900 62484000 1 609600 1536 |
| 23622000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_RTS 0 -2 |
| U7.11 CON4.20 |
| 86258400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57602100 64546500 1 609600 1536 |
| 19587000 64546500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_DTR 0 -2 |
| U7.10 CON4.8 |
| 90068400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 73075800 52882800 1 609600 1536 |
| 71856600 52882800 1 609600 1536 |
| 58130400 66609000 1 609600 1536 |
| 23622000 66609000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_4 0 -2 |
| R4.2 CON4.10 |
| 91630500 76962000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 81419700 66751200 1 609600 1536 |
| 63627000 66751200 1 609600 1536 |
| 55519200 74859000 1 609600 1536 |
| 23622000 74859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_5 0 -2 |
| R3.2 CON4.22 |
| 91630500 71628000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 85763100 65760600 1 609600 1536 |
| 63207900 65760600 1 609600 1536 |
| 56172000 72796500 1 609600 1536 |
| 19587000 72796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_6 0 -2 |
| R1.2 CON4.21 |
| 91630500 60960000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 65189100 60960000 1 609600 1536 |
| 57477600 68671500 1 609600 1536 |
| 19587000 68671500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_7 0 -2 |
| R2.2 CON4.9 |
| 91630500 66294000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 88811100 66294000 1 609600 1536 |
| 87287100 64770000 1 609600 1536 |
| 62788800 64770000 1 609600 1536 |
| 56824800 70734000 1 609600 1536 |
| 23622000 70734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_3 0 -2 |
| R11.2 CON4.23 |
| 64960500 68580000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 56619000 76921500 1 609600 1536 |
| 19587000 76921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_DSR 0 -2 |
| R12.2 CON4.11 |
| 64960500 74676000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 61760100 74676000 1 609600 1536 |
| 57452100 78984000 1 609600 1536 |
| 23622000 78984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_CTS 0 -2 |
| R13.2 CON4.24 |
| 64960500 80772000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 44005500 80772000 1 609600 1536 |
| 43731000 81046500 1 609600 1536 |
| 19587000 81046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_RI 0 -2 |
| R14.2 CON4.12 |
| 64960500 86868000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 46253400 86868000 1 609600 1536 |
| 42494400 83109000 1 609600 1536 |
| 23622000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_3 0 -2 |
| CON1.15 U2.9 |
| 149577000 43921500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 151599900 45944400 1 609600 1536 |
| 151599900 48046500 1 609600 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 151599900 99098100 1 609600 1536 |
| 141427200 109270800 1 609600 1536 |
| 122377200 109270800 1 609600 1536 |
| 118643400 105537000 1 609600 1536 |
| 113919000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* TXD 0 -2 |
| D1.A CON3.3 |
| 81534000 93154500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62068500 93154500 1 609600 1536 |
| 53721000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01853 0 -2 |
| U1.7 R1.1 |
| 121958100 61950600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 113957100 61950600 1 609600 1536 |
| 112966500 60960000 1 609600 1536 |
| 104965500 60960000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01906 0 -2 |
| U1.5 R2.1 |
| 121958100 69570600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 116243100 69570600 1 609600 1536 |
| 112966500 66294000 1 609600 1536 |
| 104965500 66294000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01959 0 -2 |
| U1.3 R3.1 |
| 121958100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 118529100 77190600 1 609600 1536 |
| 112966500 71628000 1 609600 1536 |
| 104965500 71628000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02012 0 -2 |
| U1.1 R4.1 |
| 121958100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 117881400 80733900 1 609600 1536 |
| 108737400 80733900 1 609600 1536 |
| 104965500 76962000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02164 0 -2 |
| U2.7 R11.1 |
| 110109000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 101841300 85839300 1 609600 1536 |
| 95097600 85839300 1 609600 1536 |
| 78295500 69037200 1 609600 1536 |
| 78295500 68580000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02168 0 -2 |
| U2.3 R13.1 |
| 94869000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87896700 87134700 1 609600 1536 |
| 84658200 87134700 1 609600 1536 |
| 78295500 80772000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02134 0 -2 |
| U2.5 R12.1 |
| 102489000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 98221800 89839800 1 609600 1536 |
| 93459300 89839800 1 609600 1536 |
| 78295500 74676000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02160 0 -2 |
| U2.1 R14.1 |
| 87249000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80010000 86868000 1 609600 1536 |
| 78295500 86868000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* GND 0 -2 |
| CON1.18 CON1.19 |
| 149577000 56296500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 60421500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.19 CON1.20 |
| 149577000 60421500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 64546500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.20 CON1.21 |
| 149577000 64546500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 68671500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.21 CON1.22 |
| 149577000 68671500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 72796500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.22 CON1.23 |
| 149577000 72796500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 76921500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.23 CON1.24 |
| 149577000 76921500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 81046500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.24 CON1.25 |
| 149577000 81046500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 85171500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.25 U1.15 |
| 149577000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 87210898 1 952500 1536 |
| 147329098 89458800 1 952500 1536 |
| 135178800 89458800 1 952500 1536 |
| 131368800 85648800 1 952500 1536 |
| 131368800 84810600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 83019900 1 952500 1536 |
| 133388100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.15 U1.13 |
| 133388100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 78981300 1 952500 1536 |
| 131368800 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 75399900 1 952500 1536 |
| 133388100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.13 U1.11 |
| 133388100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 71361300 1 952500 1536 |
| 131368800 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 67779900 1 952500 1536 |
| 133388100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.11 U1.9 |
| 133388100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 63741300 1 952500 1536 |
| 131368800 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 60159900 1 952500 1536 |
| 133388100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.9 U1.8 |
| 133388100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U1.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 105270300 33323283 1 952500 1536 |
| 109318425 37371408 1 952500 1536 |
| 109318425 45500925 1 952500 1536 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.8 U1.6 |
| 121958100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 60159900 1 952500 1536 |
| 123977400 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 63741300 1 952500 1536 |
| 121958100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U7.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101365050 28041600 1 952500 1536 |
| 97783650 24460200 1 952500 1536 |
| 93878400 24460200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.6 U1.4 |
| 121958100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 67779900 1 952500 1536 |
| 123977400 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 71361300 1 952500 1536 |
| 121958100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.4 U1.2 |
| 121958100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 75399900 1 952500 1536 |
| 123977400 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 78981300 1 952500 1536 |
| 121958100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.2 C1.C |
| 121958100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 128016000 87058500 1 952500 1536 |
| 128016000 99822000 65 952500 768 THERMAL TEARDROP P 90 90 |
| C1.C U2.8 |
| 128016000 99822000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 122301000 94107000 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.6 U2.8 |
| 106299000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 108318300 96126300 1 952500 1536 |
| 111899700 96126300 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.4 U2.6 |
| 98679000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 100698300 96126300 1 952500 1536 |
| 104279700 96126300 1 952500 1536 |
| 106299000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 U2.4 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 93078300 96126300 1 952500 1536 |
| 96659700 96126300 1 952500 1536 |
| 98679000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON3.5 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 82600800 96393000 1 952500 1536 |
| 67080000 96393000 1 952500 1536 |
| 61971000 101502000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON4.13 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 83972400 92735400 1 952500 1536 |
| 81229200 89992200 1 952500 1536 |
| 47358300 89992200 1 952500 1536 |
| 44600100 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.25 CON4.13 |
| 19587000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 21297900 86882400 1 952500 1536 |
| 21297900 86967300 1 952500 1536 |
| 21564600 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.8 U6.8 |
| 93878400 24460200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 26460450 1 952500 1536 |
| 63112650 26460450 1 952500 1536 |
| 60845700 24193500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* STROBE 0 -2 |
| U6.1 CON1.1 |
| 34175700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48615600 9753600 1 609600 1536 |
| 117336600 9753600 1 609600 1536 |
| 145317000 37734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D0 0 -2 |
| CON1.2 U6.3 |
| 145317000 41859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 41859000 1 609600 1536 |
| 113325900 11734800 1 609600 1536 |
| 54254400 11734800 1 609600 1536 |
| 41795700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D1 0 -2 |
| U6.4 CON1.3 |
| 45605700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57073800 12725400 1 609600 1536 |
| 112058400 12725400 1 609600 1536 |
| 145317000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DCD 0 -2 |
| J3.1 CON3.1 |
| 45339000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 45339000 97650300 1 609600 1536 |
| 45471000 97782300 1 609600 1536 |
| 45471000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D2 0 -2 |
| CON1.4 U6.6 |
| 145317000 50109000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 50109000 1 609600 1536 |
| 107825159 14706600 1 609600 1536 |
| 62712600 14706600 1 609600 1536 |
| 53225700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RXD 0 -2 |
| J3.2 CON3.2 |
| 49149000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 49149000 97497900 1 609600 1536 |
| 49596000 97944900 1 609600 1536 |
| 49596000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D3 0 -2 |
| CON1.5 U7.1 |
| 145317000 54234000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 54234000 1 609600 1536 |
| 105903900 16687800 1 609600 1536 |
| 74980800 16687800 1 609600 1536 |
| 67208400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* +12V 0 -2 |
| J1.1 U7.9 |
| 105003600 39319200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101155500 39319200 1 952500 1536 |
| 97726500 35890200 1 952500 1536 |
| 93878400 35890200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.9 U6.9 |
| 93878400 35890200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 33889950 1 952500 1536 |
| 65403484 33889950 1 952500 1536 |
| 63669934 35623500 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.1 U6.9 |
| 23622000 37734000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 27732750 33623250 1 952500 1536 |
| 58845450 33623250 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *POUR* POUR ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES FLAGS [OWNERNAME SIGNAME HATCHGRID HATCHRAD] |
| *REMARK* PIECETYPE CORNERS ARCS WIDTH LEVEL |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| HP26402539 POUROUT 6096000 119253000 1 0 HP26402539 GND |
| POLY 5 0 381000 1 |
| 2667000 -3048000 |
| 154686000 -3048000 |
| 154686000 -110490000 |
| 2667000 -110490000 |
| 2667000 -3048000 |
| ANP000003 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -630092783 -585044931 |
| -629958079 -584910227 2250 1519 |
| -629775891 -584854570 |
| -627954000 -584298000 1969 -68 |
| -629829001 -584634790 |
| -630016500 -584668469 101 1596 |
| -630203999 -584634790 |
| -632079000 -584298000 3498 -42 |
| -630233813 -584771647 |
| -630049295 -584819011 1656 593 |
| -630183999 -584953715 |
| -630092783 -585044931 |
| ANP000004 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -625967783 -585044931 |
| -625833079 -584910227 2250 1519 |
| -625650891 -584854570 |
| -623829000 -584298000 1969 -68 |
| -625704001 -584634790 |
| -625891500 -584668469 101 1596 |
| -626078999 -584634790 |
| -627954000 -584298000 3498 -42 |
| -626108813 -584771647 |
| -625924295 -584819011 1656 593 |
| -626058999 -584953715 |
| -625967783 -585044931 |
| ANP000005 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -635963391 -579481430 |
| -636145579 -579425773 3430 1519 |
| -636280283 -579291069 |
| -636371499 -579382285 |
| -636236795 -579516989 1350 593 |
| -636421313 -579564353 |
| -638266500 -580038000 143 -42 |
| -636391499 -579701210 |
| -636204000 -579667531 1901 1596 |
| -636016501 -579701210 |
| -634141500 -580038000 1698 -68 |
| -635963391 -579481430 |
| ANP000006 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 13 8 381000 1 |
| -629752196 -576663912 |
| -629886900 -576529208 3150 1350 |
| -629886900 -576338708 |
| -633249014 -576338708 |
| -633249014 -576529208 900 450 |
| -633383718 -576394504 |
| -634888431 -577899217 |
| -634753727 -578033921 1350 1519 |
| -634698070 -578216109 |
| -634141500 -580038000 1069 -968 |
| -632266499 -579701210 |
| -632079000 -579667531 1901 1596 |
| -631891501 -579701210 |
| -630016500 -580038000 1698 -492 |
| -630986326 -578398338 |
| -631083308 -578234372 3006 593 |
| -630892808 -578234372 |
| -630892808 -578167502 |
| -630016500 -578167502 1800 -450 |
| -630636143 -577547859 |
| -629752196 -576663912 |
| ANP000008 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 33 21 381000 1 |
| -597682500 -582155714 |
| -597817204 -582021010 3150 1576 |
| -597890583 -581845210 |
| -598551000 -580263000 2926 -785 |
| -599971455 -581223128 |
| -600129283 -581329808 340 559 |
| -600129283 -581139308 |
| -600951300 -581139308 |
| -600951300 -580263000 2700 -450 |
| -601570943 -580882643 |
| -602210982 -580242604 |
| -602345686 -580377308 450 450 |
| -602345686 -580186808 |
| -602687717 -580186808 |
| -602687717 -580377308 900 559 |
| -602845545 -580270628 |
| -604266000 -579310500 3259 -2159 |
| -604850985 -577698876 |
| -604915983 -577519808 2899 1600 |
| -604915983 -577329308 |
| -627860112 -577329308 |
| -627860112 -577519808 900 450 |
| -627994816 -577385104 |
| -628861442 -578251730 |
| -628726738 -578386434 1350 970 |
| -628843989 -578536576 |
| -630016500 -580038000 520 -418 |
| -628141499 -579701210 |
| -627954000 -579667531 1901 1596 |
| -627766501 -579701210 |
| -625891500 -580038000 1698 -1392 |
| -624251838 -579068174 |
| -624087872 -578971192 2106 593 |
| -624087872 -579161692 |
| -622893300 -579161692 |
| -622893300 -580038000 900 -450 |
| -622273657 -579418357 |
| -617301724 -584390290 |
| -617167020 -584255586 2250 1653 |
| -617002595 -584159384 |
| -613599000 -582168000 2103 -2857 |
| -612605439 -585984138 |
| -612557441 -586168492 1045 1654 |
| -612557441 -586358992 |
| -607527286 -586358992 |
| -607527286 -586168492 2700 450 |
| -607392582 -586303196 |
| -605457143 -584367757 |
| -604837500 -584987400 1350 -450 |
| -604837500 -584111092 |
| -599716786 -584111092 |
| -599716786 -583920592 2700 450 |
| -599582082 -584055296 |
| -597682500 -582155714 |
| ANP000014 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 15 12 381000 1 |
| -536559790 -640003499 |
| -536593469 -639816000 2801 1596 |
| -536559790 -639628501 |
| -536223000 -637753500 2598 -492 |
| -537862662 -638723326 |
| -538026628 -638820308 306 593 |
| -538026628 -638629808 |
| -538639159 -638629808 |
| -538639159 -638820308 900 1183 |
| -538806780 -638910825 |
| -540483000 -639816000 283 -1081 |
| -540146210 -641691001 |
| -540112531 -641878500 1001 1596 |
| -540146210 -642065999 |
| -540483000 -643941000 798 -1081 |
| -538806780 -644846175 |
| -538639159 -644936692 1516 1183 |
| -538639159 -645127192 |
| -538026628 -645127192 |
| -538026628 -644936692 2700 593 |
| -537862662 -645033674 |
| -536223000 -646003500 1493 -492 |
| -536559790 -644128499 |
| -536593469 -643941000 2801 1596 |
| -536559790 -643753501 |
| -536223000 -641878500 2598 -1596 |
| -536559790 -640003499 |
| ANP000015 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -602888817 |
| -535076408 -602493183 |
| -535266908 -602493183 0 1171 |
| -535353825 -602323667 |
| -536223000 -600628500 2971 -169 |
| -535886210 -602503501 |
| -535852531 -602691000 1001 1596 |
| -535886210 -602878499 |
| -536223000 -604753500 798 -169 |
| -535353825 -603058333 |
| -535266908 -602888817 2428 1171 |
| -535076408 -602888817 |
| ANP000016 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -607013817 |
| -535076408 -606618183 |
| -535266908 -606618183 0 1171 |
| -535353825 -606448667 |
| -536223000 -604753500 2971 -169 |
| -535886210 -606628501 |
| -535852531 -606816000 1001 1596 |
| -535886210 -607003499 |
| -536223000 -608878500 798 -169 |
| -535353825 -607183333 |
| -535266908 -607013817 2428 1171 |
| -535076408 -607013817 |
| ANP000017 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -611138817 |
| -535076408 -610743183 |
| -535266908 -610743183 0 1171 |
| -535353825 -610573667 |
| -536223000 -608878500 2971 -169 |
| -535886210 -610753501 |
| -535852531 -610941000 1001 1596 |
| -535886210 -611128499 |
| -536223000 -613003500 798 -169 |
| -535353825 -611308333 |
| -535266908 -611138817 2428 1171 |
| -535076408 -611138817 |
| ANP000018 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -615263817 |
| -535076408 -614868183 |
| -535266908 -614868183 0 1171 |
| -535353825 -614698667 |
| -536223000 -613003500 2971 -169 |
| -535886210 -614878501 |
| -535852531 -615066000 1001 1596 |
| -535886210 -615253499 |
| -536223000 -617128500 798 -169 |
| -535353825 -615433333 |
| -535266908 -615263817 2428 1171 |
| -535076408 -615263817 |
| ANP000019 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -619388817 |
| -535076408 -618993183 |
| -535266908 -618993183 0 1171 |
| -535353825 -618823667 |
| -536223000 -617128500 2971 -169 |
| -535886210 -619003501 |
| -535852531 -619191000 1001 1596 |
| -535886210 -619378499 |
| -536223000 -621253500 798 -169 |
| -535353825 -619558333 |
| -535266908 -619388817 2428 1171 |
| -535076408 -619388817 |
| ANP000020 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -623513817 |
| -535076408 -623118183 |
| -535266908 -623118183 0 1171 |
| -535353825 -622948667 |
| -536223000 -621253500 2971 -169 |
| -535886210 -623128501 |
| -535852531 -623316000 1001 1596 |
| -535886210 -623503499 |
| -536223000 -625378500 798 -169 |
| -535353825 -623683333 |
| -535266908 -623513817 2428 1171 |
| -535076408 -623513817 |
| ANP000021 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -627638817 |
| -535076408 -627243183 |
| -535266908 -627243183 0 1171 |
| -535353825 -627073667 |
| -536223000 -625378500 2971 -169 |
| -535886210 -627253501 |
| -535852531 -627441000 1001 1596 |
| -535886210 -627628499 |
| -536223000 -629503500 798 -169 |
| -535353825 -627808333 |
| -535266908 -627638817 2428 1171 |
| -535076408 -627638817 |
| ANP000022 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -631763817 |
| -535076408 -631368183 |
| -535266908 -631368183 0 1171 |
| -535353825 -631198667 |
| -536223000 -629503500 2971 -169 |
| -535886210 -631378501 |
| -535852531 -631566000 1001 1596 |
| -535886210 -631753499 |
| -536223000 -633628500 798 -169 |
| -535353825 -631933333 |
| -535266908 -631763817 2428 1171 |
| -535076408 -631763817 |
| ANP000024 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535476069 -639892283 |
| -535610773 -639757579 3150 1519 |
| -535666430 -639575391 |
| -536223000 -637753500 2869 -68 |
| -535886210 -639628501 |
| -535852531 -639816000 1001 1596 |
| -535886210 -640003499 |
| -536223000 -641878500 798 -42 |
| -535749353 -640033313 |
| -535701989 -639848795 2556 593 |
| -535567285 -639983499 |
| -535476069 -639892283 |
| ANP000030 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -604940999 |
| -540853469 -604753500 2801 1596 |
| -540819790 -604566001 |
| -540483000 -602691000 2598 -42 |
| -540956647 -604536187 |
| -541004011 -604720705 756 593 |
| -541138715 -604586001 |
| -541229931 -604677217 |
| -541095227 -604811921 1350 1519 |
| -541039570 -604994109 |
| -540483000 -606816000 1069 -68 |
| -540819790 -604940999 |
| ANP000031 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -609065999 |
| -540853469 -608878500 2801 1596 |
| -540819790 -608691001 |
| -540483000 -606816000 2598 -42 |
| -540956647 -608661187 |
| -541004011 -608845705 756 593 |
| -541138715 -608711001 |
| -541229931 -608802217 |
| -541095227 -608936921 1350 1519 |
| -541039570 -609119109 |
| -540483000 -610941000 1069 -68 |
| -540819790 -609065999 |
| ANP000032 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -613190999 |
| -540853469 -613003500 2801 1596 |
| -540819790 -612816001 |
| -540483000 -610941000 2598 -42 |
| -540956647 -612786187 |
| -541004011 -612970705 756 593 |
| -541138715 -612836001 |
| -541229931 -612927217 |
| -541095227 -613061921 1350 1519 |
| -541039570 -613244109 |
| -540483000 -615066000 1069 -68 |
| -540819790 -613190999 |
| ANP000033 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -617315999 |
| -540853469 -617128500 2801 1596 |
| -540819790 -616941001 |
| -540483000 -615066000 2598 -42 |
| -540956647 -616911187 |
| -541004011 -617095705 756 593 |
| -541138715 -616961001 |
| -541229931 -617052217 |
| -541095227 -617186921 1350 1519 |
| -541039570 -617369109 |
| -540483000 -619191000 1069 -68 |
| -540819790 -617315999 |
| ANP000034 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -621440999 |
| -540853469 -621253500 2801 1596 |
| -540819790 -621066001 |
| -540483000 -619191000 2598 -42 |
| -540956647 -621036187 |
| -541004011 -621220705 756 593 |
| -541138715 -621086001 |
| -541229931 -621177217 |
| -541095227 -621311921 1350 1519 |
| -541039570 -621494109 |
| -540483000 -623316000 1069 -68 |
| -540819790 -621440999 |
| ANP000035 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -625565999 |
| -540853469 -625378500 2801 1596 |
| -540819790 -625191001 |
| -540483000 -623316000 2598 -42 |
| -540956647 -625161187 |
| -541004011 -625345705 756 593 |
| -541138715 -625211001 |
| -541229931 -625302217 |
| -541095227 -625436921 1350 1519 |
| -541039570 -625619109 |
| -540483000 -627441000 1069 -68 |
| -540819790 -625565999 |
| ANP000036 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -629690999 |
| -540853469 -629503500 2801 1596 |
| -540819790 -629316001 |
| -540483000 -627441000 2598 -42 |
| -540956647 -629286187 |
| -541004011 -629470705 756 593 |
| -541138715 -629336001 |
| -541229931 -629427217 |
| -541095227 -629561921 1350 1519 |
| -541039570 -629744109 |
| -540483000 -631566000 1069 -68 |
| -540819790 -629690999 |
| ANP000037 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -642065999 |
| -540853469 -641878500 2801 1596 |
| -540819790 -641691001 |
| -540483000 -639816000 2598 -42 |
| -540956647 -641661187 |
| -541004011 -641845705 756 593 |
| -541138715 -641711001 |
| -541229931 -641802217 |
| -541095227 -641936921 1350 1519 |
| -541039570 -642119109 |
| -540483000 -643941000 1069 -68 |
| -540819790 -642065999 |
| ANP000078 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -605910825 |
| -664021841 -605820308 3316 1183 |
| -664021841 -605629808 |
| -664409372 -605629808 |
| -664409372 -605820308 900 593 |
| -664573338 -605723326 |
| -666213000 -604753500 3293 -492 |
| -665876210 -606628501 |
| -665842531 -606816000 1001 1596 |
| -665876210 -607003499 |
| -666213000 -608878500 798 -492 |
| -664573338 -607908674 |
| -664409372 -607811692 2106 593 |
| -664409372 -608002192 |
| -664021841 -608002192 |
| -664021841 -607811692 2700 1183 |
| -663854220 -607721175 |
| -662178000 -606816000 2083 -567 |
| -663854220 -605910825 |
| ANP000079 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -610035825 |
| -664021841 -609945308 3316 1183 |
| -664021841 -609754808 |
| -664409372 -609754808 |
| -664409372 -609945308 900 593 |
| -664573338 -609848326 |
| -666213000 -608878500 3293 -492 |
| -665876210 -610753501 |
| -665842531 -610941000 1001 1596 |
| -665876210 -611128499 |
| -666213000 -613003500 798 -492 |
| -664573338 -612033674 |
| -664409372 -611936692 2106 593 |
| -664409372 -612127192 |
| -664021841 -612127192 |
| -664021841 -611936692 2700 1183 |
| -663854220 -611846175 |
| -662178000 -610941000 2083 -567 |
| -663854220 -610035825 |
| ANP000080 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -614160825 |
| -664021841 -614070308 3316 1183 |
| -664021841 -613879808 |
| -664409372 -613879808 |
| -664409372 -614070308 900 593 |
| -664573338 -613973326 |
| -666213000 -613003500 3293 -492 |
| -665876210 -614878501 |
| -665842531 -615066000 1001 1596 |
| -665876210 -615253499 |
| -666213000 -617128500 798 -492 |
| -664573338 -616158674 |
| -664409372 -616061692 2106 593 |
| -664409372 -616252192 |
| -664021841 -616252192 |
| -664021841 -616061692 2700 1183 |
| -663854220 -615971175 |
| -662178000 -615066000 2083 -567 |
| -663854220 -614160825 |
| ANP000081 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -618285825 |
| -664021841 -618195308 3316 1183 |
| -664021841 -618004808 |
| -664409372 -618004808 |
| -664409372 -618195308 900 593 |
| -664573338 -618098326 |
| -666213000 -617128500 3293 -492 |
| -665876210 -619003501 |
| -665842531 -619191000 1001 1596 |
| -665876210 -619378499 |
| -666213000 -621253500 798 -492 |
| -664573338 -620283674 |
| -664409372 -620186692 2106 593 |
| -664409372 -620377192 |
| -664021841 -620377192 |
| -664021841 -620186692 2700 1183 |
| -663854220 -620096175 |
| -662178000 -619191000 2083 -567 |
| -663854220 -618285825 |
| ANP000082 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -622410825 |
| -664021841 -622320308 3316 1183 |
| -664021841 -622129808 |
| -664409372 -622129808 |
| -664409372 -622320308 900 593 |
| -664573338 -622223326 |
| -666213000 -621253500 3293 -492 |
| -665876210 -623128501 |
| -665842531 -623316000 1001 1596 |
| -665876210 -623503499 |
| -666213000 -625378500 798 -492 |
| -664573338 -624408674 |
| -664409372 -624311692 2106 593 |
| -664409372 -624502192 |
| -664021841 -624502192 |
| -664021841 -624311692 2700 1183 |
| -663854220 -624221175 |
| -662178000 -623316000 2083 -567 |
| -663854220 -622410825 |
| ANP000083 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -626535825 |
| -664021841 -626445308 3316 1183 |
| -664021841 -626254808 |
| -664409372 -626254808 |
| -664409372 -626445308 900 593 |
| -664573338 -626348326 |
| -666213000 -625378500 3293 -492 |
| -665876210 -627253501 |
| -665842531 -627441000 1001 1596 |
| -665876210 -627628499 |
| -666213000 -629503500 798 -492 |
| -664573338 -628533674 |
| -664409372 -628436692 2106 593 |
| -664409372 -628627192 |
| -664021841 -628627192 |
| -664021841 -628436692 2700 1183 |
| -663854220 -628346175 |
| -662178000 -627441000 2083 -567 |
| -663854220 -626535825 |
| ANP000084 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -630660825 |
| -664021841 -630570308 3316 1183 |
| -664021841 -630379808 |
| -664409372 -630379808 |
| -664409372 -630570308 900 593 |
| -664573338 -630473326 |
| -666213000 -629503500 3293 -492 |
| -665876210 -631378501 |
| -665842531 -631566000 1001 1596 |
| -665876210 -631753499 |
| -666213000 -633628500 798 -492 |
| -664573338 -632658674 |
| -664409372 -632561692 2106 593 |
| -664409372 -632752192 |
| -664021841 -632752192 |
| -664021841 -632561692 2700 1183 |
| -663854220 -632471175 |
| -662178000 -631566000 2083 -567 |
| -663854220 -630660825 |
| ANP000085 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -634785825 |
| -664021841 -634695308 3316 1183 |
| -664021841 -634504808 |
| -664409372 -634504808 |
| -664409372 -634695308 900 593 |
| -664573338 -634598326 |
| -666213000 -633628500 3293 -492 |
| -665876210 -635503501 |
| -665842531 -635691000 1001 1596 |
| -665876210 -635878499 |
| -666213000 -637753500 798 -492 |
| -664573338 -636783674 |
| -664409372 -636686692 2106 593 |
| -664409372 -636877192 |
| -664021841 -636877192 |
| -664021841 -636686692 2700 1183 |
| -663854220 -636596175 |
| -662178000 -635691000 2083 -567 |
| -663854220 -634785825 |
| ANP000086 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -638910825 |
| -664021841 -638820308 3316 1183 |
| -664021841 -638629808 |
| -664409372 -638629808 |
| -664409372 -638820308 900 593 |
| -664573338 -638723326 |
| -666213000 -637753500 3293 -492 |
| -665876210 -639628501 |
| -665842531 -639816000 1001 1596 |
| -665876210 -640003499 |
| -666213000 -641878500 798 -492 |
| -664573338 -640908674 |
| -664409372 -640811692 2106 593 |
| -664409372 -641002192 |
| -664021841 -641002192 |
| -664021841 -640811692 2700 1183 |
| -663854220 -640721175 |
| -662178000 -639816000 2083 -567 |
| -663854220 -638910825 |
| ANP000087 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -643035825 |
| -664021841 -642945308 3316 1183 |
| -664021841 -642754808 |
| -664409372 -642754808 |
| -664409372 -642945308 900 593 |
| -664573338 -642848326 |
| -666213000 -641878500 3293 -492 |
| -665876210 -643753501 |
| -665842531 -643941000 1001 1596 |
| -665876210 -644128499 |
| -666213000 -646003500 798 -492 |
| -664573338 -645033674 |
| -664409372 -644936692 2106 593 |
| -664409372 -645127192 |
| -664021841 -645127192 |
| -664021841 -644936692 2700 1183 |
| -663854220 -644846175 |
| -662178000 -643941000 2083 -567 |
| -663854220 -643035825 |
| ANP000088 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 569 432 381000 1 |
| -525208500 -676656000 |
| -525208500 -569976000 |
| -525399000 -569976000 0 900 |
| -525399000 -569785500 |
| -676656000 -569785500 |
| -676656000 -569976000 900 900 |
| -676846500 -569976000 |
| -676846500 -676656000 |
| -676656000 -676656000 1800 900 |
| -676656000 -676846500 |
| -638083494 -676846500 |
| -638083494 -676656000 2700 1350 |
| -637948790 -676521296 |
| -651093282 -663376804 |
| -651227986 -663511508 450 450 |
| -651227986 -663321008 |
| -652767300 -663321008 |
| -652767300 -662749500 2700 -900 |
| -653338808 -662749500 |
| -653338808 -660463500 |
| -652767300 -660463500 1800 -900 |
| -652767300 -659891992 |
| -650481300 -659891992 |
| -650481300 -660463500 900 -900 |
| -649909792 -660463500 |
| -649909792 -661598692 |
| -649719292 -661598692 1800 23 |
| -649909632 -661606500 |
| -649719292 -661614308 1776 23 |
| -649909792 -661614308 |
| -649909792 -662002814 |
| -649719292 -662002814 1800 450 |
| -649853996 -662137518 |
| -649800032 -662191482 |
| -649665328 -662056778 2250 1486 |
| -649480226 -662011750 |
| -647814300 -661606500 1936 -134 |
| -649528794 -661613527 |
| -649719292 -661614308 2 21 |
| -649528952 -661606500 |
| -649719292 -661598692 3576 21 |
| -649528794 -661599473 |
| -647814300 -661606500 1797 -1795 |
| -646099799 -661601531 |
| -645909300 -661600979 1801 14 |
| -646099720 -661606500 |
| -645909300 -661612021 1783 14 |
| -646099799 -661611469 |
| -647814300 -661606500 3598 -107 |
| -646130974 -661932000 |
| -645943939 -661968167 1690 559 |
| -646078643 -662102871 |
| -645990032 -662191482 |
| -645855328 -662056778 2250 1486 |
| -645670226 -662011750 |
| -644004300 -661606500 1936 -135 |
| -645718801 -661611469 |
| -645909300 -661612021 1 14 |
| -645718880 -661606500 |
| -645909300 -661600979 3583 14 |
| -645718801 -661601531 |
| -644004300 -661606500 1798 -1796 |
| -642289799 -661601531 |
| -642099300 -661600979 1801 14 |
| -642289720 -661606500 |
| -642099300 -661612021 1783 14 |
| -642289799 -661611469 |
| -644004300 -661606500 3598 -107 |
| -642320974 -661932000 |
| -642133939 -661968167 1690 559 |
| -642268643 -662102871 |
| -642180032 -662191482 |
| -642045328 -662056778 2250 1486 |
| -641860226 -662011750 |
| -640194300 -661606500 1936 -135 |
| -641908801 -661611469 |
| -642099300 -661612021 1 14 |
| -641908880 -661606500 |
| -642099300 -661600979 3583 14 |
| -641908801 -661601531 |
| -640194300 -661606500 1798 -1796 |
| -638479799 -661601531 |
| -638289300 -661600979 1801 14 |
| -638479720 -661606500 |
| -638289300 -661612021 1783 14 |
| -638479799 -661611469 |
| -640194300 -661606500 3598 -107 |
| -638510974 -661932000 |
| -638323939 -661968167 1690 559 |
| -638458643 -662102871 |
| -638370032 -662191482 |
| -638235328 -662056778 2250 1486 |
| -638050226 -662011750 |
| -636384300 -661606500 1936 -135 |
| -638098801 -661611469 |
| -638289300 -661612021 1 14 |
| -638098880 -661606500 |
| -638289300 -661600979 3583 14 |
| -638098801 -661601531 |
| -636384300 -661606500 1798 -1796 |
| -634669799 -661601531 |
| -634479300 -661600979 1801 14 |
| -634669720 -661606500 |
| -634479300 -661612021 1783 14 |
| -634669799 -661611469 |
| -636384300 -661606500 3598 -107 |
| -634700974 -661932000 |
| -634513939 -661968167 1690 559 |
| -634648643 -662102871 |
| -634560032 -662191482 |
| -634425328 -662056778 2250 1486 |
| -634240226 -662011750 |
| -632574300 -661606500 1936 -135 |
| -634288801 -661611469 |
| -634479300 -661612021 1 14 |
| -634288880 -661606500 |
| -634479300 -661600979 3583 14 |
| -634288801 -661601531 |
| -632574300 -661606500 1798 -1796 |
| -630859799 -661601531 |
| -630669300 -661600979 1801 14 |
| -630859720 -661606500 |
| -630669300 -661612021 1783 14 |
| -630859799 -661611469 |
| -632574300 -661606500 3598 -107 |
| -630890974 -661932000 |
| -630703939 -661968167 1690 559 |
| -630838643 -662102871 |
| -630750032 -662191482 |
| -630615328 -662056778 2250 1486 |
| -630430226 -662011750 |
| -628764300 -661606500 1936 -135 |
| -630478801 -661611469 |
| -630669300 -661612021 1 14 |
| -630478880 -661606500 |
| -630669300 -661600979 3583 14 |
| -630478801 -661601531 |
| -628764300 -661606500 1798 -1796 |
| -627049799 -661601531 |
| -626859300 -661600979 1801 14 |
| -627049720 -661606500 |
| -626859300 -661612021 1783 14 |
| -627049799 -661611469 |
| -628764300 -661606500 3598 -107 |
| -627080974 -661932000 |
| -626893939 -661968167 1690 559 |
| -627028643 -662102871 |
| -626940032 -662191482 |
| -626805328 -662056778 2250 1486 |
| -626620226 -662011750 |
| -624954300 -661606500 1936 -135 |
| -626668801 -661611469 |
| -626859300 -661612021 1 14 |
| -626668880 -661606500 |
| -626859300 -661600979 3583 14 |
| -626668801 -661601531 |
| -624954300 -661606500 1798 -2835 |
| -625359550 -663272426 |
| -625404578 -663457528 763 1486 |
| -625539282 -663592232 |
| -619960818 -669170696 |
| -619826114 -669035992 2250 450 |
| -619826114 -669226492 |
| -612404102 -669226492 |
| -612404102 -669035992 2700 1350 |
| -612269398 -668901288 |
| -618060582 -663110104 |
| -618195286 -663244808 450 450 |
| -618195286 -663054308 |
| -619734600 -663054308 |
| -619734600 -662482800 2700 -900 |
| -620306108 -662482800 |
| -620306108 -660196800 |
| -619734600 -660196800 1800 -900 |
| -619734600 -659625292 |
| -617448600 -659625292 |
| -617448600 -660196800 900 -900 |
| -616877092 -660196800 |
| -616877092 -661331992 |
| -616686592 -661331992 1800 23 |
| -616876932 -661339800 |
| -616686592 -661347608 1776 23 |
| -616877092 -661347608 |
| -616877092 -661736114 |
| -616686592 -661736114 1800 450 |
| -616821296 -661870818 |
| -616767332 -661924782 |
| -616632628 -661790078 2250 1486 |
| -616447526 -661745050 |
| -614781600 -661339800 1936 -134 |
| -616496094 -661346827 |
| -616686592 -661347608 2 21 |
| -616496252 -661339800 |
| -616686592 -661331992 3576 21 |
| -616496094 -661332773 |
| -614781600 -661339800 1797 -1795 |
| -613067099 -661334831 |
| -612876600 -661334279 1801 14 |
| -613067020 -661339800 |
| -612876600 -661345321 1783 14 |
| -613067099 -661344769 |
| -614781600 -661339800 3598 -107 |
| -613098274 -661665300 |
| -612911239 -661701467 1690 559 |
| -613045943 -661836171 |
| -612957332 -661924782 |
| -612822628 -661790078 2250 1486 |
| -612637526 -661745050 |
| -610971600 -661339800 1936 -135 |
| -612686101 -661344769 |
| -612876600 -661345321 1 14 |
| -612686180 -661339800 |
| -612876600 -661334279 3583 14 |
| -612686101 -661334831 |
| -610971600 -661339800 1798 -1796 |
| -609257099 -661334831 |
| -609066600 -661334279 1801 14 |
| -609257020 -661339800 |
| -609066600 -661345321 1783 14 |
| -609257099 -661344769 |
| -610971600 -661339800 3598 -107 |
| -609288274 -661665300 |
| -609101239 -661701467 1690 559 |
| -609235943 -661836171 |
| -609147332 -661924782 |
| -609012628 -661790078 2250 1486 |
| -608827526 -661745050 |
| -607161600 -661339800 1936 -135 |
| -608876101 -661344769 |
| -609066600 -661345321 1 14 |
| -608876180 -661339800 |
| -609066600 -661334279 3583 14 |
| -608876101 -661334831 |
| -607161600 -661339800 1798 -1796 |
| -605447099 -661334831 |
| -605256600 -661334279 1801 14 |
| -605447020 -661339800 |
| -605256600 -661345321 1783 14 |
| -605447099 -661344769 |
| -607161600 -661339800 3598 -107 |
| -605478274 -661665300 |
| -605291239 -661701467 1690 559 |
| -605425943 -661836171 |
| -605337332 -661924782 |
| -605202628 -661790078 2250 1486 |
| -605017526 -661745050 |
| -603351600 -661339800 1936 -135 |
| -605066101 -661344769 |
| -605256600 -661345321 1 14 |
| -605066180 -661339800 |
| -605256600 -661334279 3583 14 |
| -605066101 -661334831 |
| -603351600 -661339800 1798 -1796 |
| -601637099 -661334831 |
| -601446600 -661334279 1801 14 |
| -601637020 -661339800 |
| -601446600 -661345321 1783 14 |
| -601637099 -661344769 |
| -603351600 -661339800 3598 -107 |
| -601668274 -661665300 |
| -601481239 -661701467 1690 559 |
| -601615943 -661836171 |
| -601527332 -661924782 |
| -601392628 -661790078 2250 1486 |
| -601207526 -661745050 |
| -599541600 -661339800 1936 -135 |
| -601256101 -661344769 |
| -601446600 -661345321 1 14 |
| -601256180 -661339800 |
| -601446600 -661334279 3583 14 |
| -601256101 -661334831 |
| -599541600 -661339800 1798 -1796 |
| -597827099 -661334831 |
| -597636600 -661334279 1801 14 |
| -597827020 -661339800 |
| -597636600 -661345321 1783 14 |
| -597827099 -661344769 |
| -599541600 -661339800 3598 -107 |
| -597858274 -661665300 |
| -597671239 -661701467 1690 559 |
| -597805943 -661836171 |
| -597717332 -661924782 |
| -597582628 -661790078 2250 1486 |
| -597397526 -661745050 |
| -595731600 -661339800 1936 -135 |
| -597446101 -661344769 |
| -597636600 -661345321 1 14 |
| -597446180 -661339800 |
| -597636600 -661334279 3583 14 |
| -597446101 -661334831 |
| -595731600 -661339800 1798 -1796 |
| -594017099 -661334831 |
| -593826600 -661334279 1801 14 |
| -594017020 -661339800 |
| -593826600 -661345321 1783 14 |
| -594017099 -661344769 |
| -595731600 -661339800 3598 -107 |
| -594048274 -661665300 |
| -593861239 -661701467 1690 559 |
| -593995943 -661836171 |
| -593907332 -661924782 |
| -593772628 -661790078 2250 1486 |
| -593587526 -661745050 |
| -591921600 -661339800 1936 -135 |
| -593636101 -661344769 |
| -593826600 -661345321 1 14 |
| -593636180 -661339800 |
| -593826600 -661334279 3583 14 |
| -593636101 -661334831 |
| -591921600 -661339800 1798 -2034 |
| -590350223 -662025593 |
| -590175626 -662101792 1564 1135 |
| -590175626 -662292292 |
| -583795471 -662292292 |
| -583795471 -662101792 2700 450 |
| -583660767 -662236496 |
| -581090775 -659666504 |
| -581225479 -659531800 3150 1135 |
| -581155901 -659354461 |
| -580529700 -657758400 2485 -2271 |
| -578933639 -657132199 |
| -578756300 -657062621 2014 1135 |
| -578621596 -657197325 |
| -573194104 -651769833 |
| -573328808 -651635129 3150 450 |
| -573138308 -651635129 |
| -573138308 -644589898 |
| -573328808 -644589898 0 538 |
| -573216513 -644436015 |
| -572262000 -643128000 2338 -2877 |
| -571307487 -644436015 |
| -571195192 -644589898 1261 538 |
| -571385692 -644589898 |
| -571385692 -650902433 |
| -571195192 -650902433 1800 1350 |
| -571060488 -651037137 |
| -570590824 -650567473 |
| -570725528 -650432769 3150 450 |
| -570535028 -650432769 |
| -570535028 -645096720 |
| -569658720 -645096720 1800 -450 |
| -570278363 -644477077 |
| -568581361 -642780075 |
| -568716065 -642645371 3150 538 |
| -568527848 -642615964 |
| -566928000 -642366000 1888 -2877 |
| -567177964 -643965848 |
| -567207371 -644154065 811 538 |
| -567342075 -644019361 |
| -568726616 -645403902 |
| -568591912 -645538606 1350 450 |
| -568782412 -645538606 |
| -568782412 -649700073 |
| -568591912 -649700073 1800 1350 |
| -568457208 -649834777 |
| -548465404 -629842973 |
| -548600108 -629708269 3150 450 |
| -548409608 -629708269 |
| -548409608 -622116300 |
| -547533300 -622116300 1800 -450 |
| -548152943 -621496657 |
| -542378001 -615721715 |
| -542512705 -615587011 3150 593 |
| -542328187 -615539647 |
| -540483000 -615066000 1943 -313 |
| -542304891 -614509430 |
| -542487079 -614453773 3430 1519 |
| -542621783 -614319069 |
| -545574296 -617271582 |
| -545439592 -617406286 1350 450 |
| -545630092 -617406286 |
| -545630092 -617943900 |
| -546506400 -617943900 0 -450 |
| -545886757 -618563543 |
| -550676243 -623353029 |
| -550541539 -623487733 1350 559 |
| -550728574 -623523900 |
| -552411900 -623849400 109 -1007 |
| -552406931 -625563901 |
| -552406379 -625754400 901 14 |
| -552411900 -625563980 |
| -552417421 -625754400 883 14 |
| -552416869 -625563901 |
| -552411900 -623849400 2698 -1796 |
| -552416869 -622134899 |
| -552417421 -621944400 2701 14 |
| -552411900 -622134820 |
| -552406379 -621944400 2683 14 |
| -552406931 -622134899 |
| -552411900 -623849400 898 -107 |
| -552086400 -622166074 |
| -552050233 -621979039 2590 559 |
| -551915529 -622113743 |
| -551826918 -622025132 |
| -551961622 -621890428 3150 1486 |
| -552006650 -621705326 |
| -552411900 -620039400 2836 -135 |
| -552406931 -621753901 |
| -552406379 -621944400 901 14 |
| -552411900 -621753980 |
| -552417421 -621944400 883 14 |
| -552416869 -621753901 |
| -552411900 -620039400 2698 -1796 |
| -552416869 -618324899 |
| -552417421 -618134400 2701 14 |
| -552411900 -618324820 |
| -552406379 -618134400 2683 14 |
| -552406931 -618324899 |
| -552411900 -620039400 898 -1035 |
| -550745974 -620444650 |
| -550560872 -620489678 1663 1486 |
| -550426168 -620624382 |
| -547438504 -617636718 |
| -547573208 -617502014 3150 450 |
| -547382708 -617502014 |
| -547382708 -616964400 |
| -546506400 -616964400 1800 -450 |
| -547126043 -616344757 |
| -542378001 -611596715 |
| -542512705 -611462011 3150 593 |
| -542328187 -611414647 |
| -540483000 -610941000 1943 -505 |
| -542021468 -609817535 |
| -542175314 -609705189 3238 1336 |
| -542200168 -609516317 |
| -542314500 -608647500 2774 -74 |
| -542314500 -609523808 |
| -544388114 -609523808 |
| -544388114 -609714308 900 450 |
| -544522818 -609579604 |
| -550676243 -615733029 |
| -550541539 -615867733 1350 559 |
| -550728574 -615903900 |
| -552411900 -616229400 109 -1007 |
| -552406931 -617943901 |
| -552406379 -618134400 901 14 |
| -552411900 -617943980 |
| -552417421 -618134400 883 14 |
| -552416869 -617943901 |
| -552411900 -616229400 2698 -1796 |
| -552416869 -614514899 |
| -552417421 -614324400 2701 14 |
| -552411900 -614514820 |
| -552406379 -614324400 2683 14 |
| -552406931 -614514899 |
| -552411900 -616229400 898 -107 |
| -552086400 -614546074 |
| -552050233 -614359039 2590 559 |
| -551915529 -614493743 |
| -551826918 -614405132 |
| -551961622 -614270428 3150 1486 |
| -552006650 -614085326 |
| -552411900 -612419400 2836 -135 |
| -552406931 -614133901 |
| -552406379 -614324400 901 14 |
| -552411900 -614133980 |
| -552417421 -614324400 883 14 |
| -552416869 -614133901 |
| -552411900 -612419400 2698 -1796 |
| -552416869 -610704899 |
| -552417421 -610514400 2701 14 |
| -552411900 -610704820 |
| -552406379 -610514400 2683 14 |
| -552406931 -610704899 |
| -552411900 -612419400 898 -1035 |
| -550745974 -612824650 |
| -550560872 -612869678 1663 1486 |
| -550426168 -613004382 |
| -545449643 -608027857 |
| -544830000 -608647500 1350 -450 |
| -544830000 -607771192 |
| -542756386 -607771192 |
| -542756386 -607580692 2700 450 |
| -542621682 -607715396 |
| -542378001 -607471715 |
| -542512705 -607337011 3150 593 |
| -542328187 -607289647 |
| -540483000 -606816000 1943 -313 |
| -542304891 -606259430 |
| -542487079 -606203773 3430 1519 |
| -542621783 -606069069 |
| -542886157 -606333443 |
| -543505800 -605713800 3150 -450 |
| -543505800 -606590108 |
| -549074414 -606590108 |
| -549074414 -606780608 900 450 |
| -549209118 -606645904 |
| -550676243 -608113029 |
| -550541539 -608247733 1350 559 |
| -550728574 -608283900 |
| -552411900 -608609400 109 -1007 |
| -552406931 -610323901 |
| -552406379 -610514400 901 14 |
| -552411900 -610323980 |
| -552417421 -610514400 883 14 |
| -552416869 -610323901 |
| -552411900 -608609400 2698 -1796 |
| -552416869 -606894899 |
| -552417421 -606704400 2701 14 |
| -552411900 -606894820 |
| -552406379 -606704400 2683 14 |
| -552406931 -606894899 |
| -552411900 -608609400 898 -107 |
| -552086400 -606926074 |
| -552050233 -606739039 2590 559 |
| -551915529 -606873743 |
| -551826918 -606785132 |
| -551961622 -606650428 3150 1486 |
| -552006650 -606465326 |
| -552411900 -604799400 2836 -135 |
| -552406931 -606513901 |
| -552406379 -606704400 901 14 |
| -552411900 -606513980 |
| -552417421 -606704400 883 14 |
| -552416869 -606513901 |
| -552411900 -604799400 2698 -1796 |
| -552416869 -603084899 |
| -552417421 -602894400 2701 14 |
| -552411900 -603084820 |
| -552406379 -602894400 2683 14 |
| -552406931 -603084899 |
| -552411900 -604799400 898 -1035 |
| -550745974 -605204650 |
| -550560872 -605249678 1663 1486 |
| -550426168 -605384382 |
| -550135943 -605094157 |
| -549516300 -605713800 1350 -450 |
| -549516300 -604837492 |
| -543947686 -604837492 |
| -543947686 -604646992 2700 450 |
| -543812982 -604781696 |
| -542378001 -603346715 |
| -542512705 -603212011 3150 593 |
| -542328187 -603164647 |
| -540483000 -602691000 1943 -942 |
| -540819790 -600815999 |
| -540853469 -600628500 2801 1596 |
| -540819790 -600441001 |
| -540483000 -598566000 2598 -492 |
| -542122662 -599535826 |
| -542286628 -599632808 306 593 |
| -542286628 -599442308 |
| -544898414 -599442308 |
| -544898414 -599632808 900 450 |
| -545033118 -599498104 |
| -547144057 -601609043 |
| -547763700 -600989400 3150 -450 |
| -547763700 -601865708 |
| -550833617 -601865708 |
| -550833617 -602056208 900 559 |
| -550991445 -601949528 |
| -552411900 -600989400 3259 -557 |
| -552406931 -602703901 |
| -552406379 -602894400 901 14 |
| -552411900 -602703980 |
| -552417421 -602894400 883 14 |
| -552416869 -602703901 |
| -552411900 -600989400 2698 -2357 |
| -550991445 -600029272 |
| -550833617 -599922592 2140 559 |
| -550833617 -600113092 |
| -548205586 -600113092 |
| -548205586 -599922592 2700 450 |
| -548070882 -600057296 |
| -545959943 -597946357 |
| -545340300 -598566000 1350 -450 |
| -545340300 -597689692 |
| -542286628 -597689692 |
| -542286628 -597499192 2700 593 |
| -542122662 -597596174 |
| -540483000 -598566000 1493 -2292 |
| -540146210 -600441001 |
| -540112531 -600628500 1001 1596 |
| -540146210 -600815999 |
| -540483000 -602691000 798 -1596 |
| -540146210 -604566001 |
| -540112531 -604753500 1001 1596 |
| -540146210 -604940999 |
| -540483000 -606816000 798 -1596 |
| -540146210 -608691001 |
| -540112531 -608878500 1001 1596 |
| -540146210 -609065999 |
| -540483000 -610941000 798 -1596 |
| -540146210 -612816001 |
| -540112531 -613003500 1001 1596 |
| -540146210 -613190999 |
| -540483000 -615066000 798 -1596 |
| -540146210 -616941001 |
| -540112531 -617128500 1001 1596 |
| -540146210 -617315999 |
| -540483000 -619191000 798 -1596 |
| -540146210 -621066001 |
| -540112531 -621253500 1001 1596 |
| -540146210 -621440999 |
| -540483000 -623316000 798 -1596 |
| -540146210 -625191001 |
| -540112531 -625378500 1001 1596 |
| -540146210 -625565999 |
| -540483000 -627441000 798 -1596 |
| -540146210 -629316001 |
| -540112531 -629503500 1001 1596 |
| -540146210 -629690999 |
| -540483000 -631566000 798 -1081 |
| -538806780 -632471175 |
| -538639159 -632561692 1516 1183 |
| -538639159 -632752192 |
| -538026628 -632752192 |
| -538026628 -632561692 2700 593 |
| -537862662 -632658674 |
| -536223000 -633628500 1493 -492 |
| -536559790 -631753499 |
| -536593469 -631566000 2801 1596 |
| -536559790 -631378501 |
| -536223000 -629503500 2598 -1596 |
| -536559790 -627628499 |
| -536593469 -627441000 2801 1596 |
| -536559790 -627253501 |
| -536223000 -625378500 2598 -1596 |
| -536559790 -623503499 |
| -536593469 -623316000 2801 1596 |
| -536559790 -623128501 |
| -536223000 -621253500 2598 -1596 |
| -536559790 -619378499 |
| -536593469 -619191000 2801 1596 |
| -536559790 -619003501 |
| -536223000 -617128500 2598 -1596 |
| -536559790 -615253499 |
| -536593469 -615066000 2801 1596 |
| -536559790 -614878501 |
| -536223000 -613003500 2598 -1596 |
| -536559790 -611128499 |
| -536593469 -610941000 2801 1596 |
| -536559790 -610753501 |
| -536223000 -608878500 2598 -1596 |
| -536559790 -607003499 |
| -536593469 -606816000 2801 1596 |
| -536559790 -606628501 |
| -536223000 -604753500 2598 -1596 |
| -536559790 -602878499 |
| -536593469 -602691000 2801 1596 |
| -536559790 -602503501 |
| -536223000 -600628500 2598 -1969 |
| -535353825 -598933333 |
| -535266908 -598763817 2428 1171 |
| -535076408 -598763817 |
| -535076408 -591041421 |
| -535266908 -591041421 0 1382 |
| -535409124 -590914674 |
| -538353000 -588291000 3182 -2296 |
| -538256965 -584348811 |
| -538252326 -584158368 2686 1363 |
| -538117622 -584023664 |
| -544679982 -577461304 |
| -544814686 -577596008 450 450 |
| -544814686 -577405508 |
| -555878992 -577405508 |
| -555878992 -577596008 900 900 |
| -556069492 -577596008 |
| -556069492 -579501000 |
| -556641000 -579501000 0 -900 |
| -556641000 -580072508 |
| -558927000 -580072508 |
| -558927000 -579501000 2700 -900 |
| -559498508 -579501000 |
| -559498508 -579424808 |
| -559689008 -579424808 0 900 |
| -559689008 -579234308 |
| -561228314 -579234308 |
| -561228314 -579424808 900 450 |
| -561363018 -579290104 |
| -564784357 -582711443 |
| -565404000 -582091800 3150 -450 |
| -565404000 -582968108 |
| -573862200 -582968108 |
| -573862200 -582091800 2700 -450 |
| -574481843 -582711443 |
| -575194629 -581998657 |
| -575329333 -582133361 450 559 |
| -575365500 -581946326 |
| -575691000 -580263000 2809 -218 |
| -576016500 -581946326 |
| -576052667 -582133361 790 559 |
| -576187371 -581998657 |
| -576900157 -582711443 |
| -577519800 -582091800 3150 -450 |
| -577519800 -582968108 |
| -581482200 -582968108 |
| -581482200 -582091800 2700 -450 |
| -582101843 -582711443 |
| -582814629 -581998657 |
| -582949333 -582133361 450 559 |
| -582985500 -581946326 |
| -583311000 -580263000 2809 -218 |
| -583636500 -581946326 |
| -583672667 -582133361 790 559 |
| -583807371 -581998657 |
| -584520157 -582711443 |
| -585139800 -582091800 3150 -450 |
| -585139800 -582968108 |
| -589102200 -582968108 |
| -589102200 -582091800 2700 -450 |
| -589721843 -582711443 |
| -590434629 -581998657 |
| -590569333 -582133361 450 559 |
| -590605500 -581946326 |
| -590931000 -580263000 2809 -1007 |
| -592645501 -580267969 |
| -592836000 -580268521 1 14 |
| -592645580 -580263000 |
| -592836000 -580257479 3583 14 |
| -592645501 -580258031 |
| -590931000 -580263000 1798 -484 |
| -592065523 -578977544 |
| -592191580 -578834716 3114 935 |
| -592056876 -578700012 |
| -592381184 -578375704 |
| -592515888 -578510408 450 450 |
| -592515888 -578319908 |
| -593994356 -578319908 |
| -593994356 -578510408 900 1569 |
| -594069020 -578685666 |
| -594741000 -580263000 669 -667 |
| -593026499 -580258031 |
| -592836000 -580257479 1801 14 |
| -593026420 -580263000 |
| -592836000 -580268521 1783 14 |
| -593026499 -580267969 |
| -594741000 -580263000 3598 -957 |
| -594917159 -581968434 |
| -594936732 -582157926 841 508 |
| -595071436 -582023222 |
| -598655257 -585607043 |
| -599274900 -584987400 3150 -450 |
| -599274900 -585863708 |
| -604395614 -585863708 |
| -604395614 -586054208 900 450 |
| -604530318 -585919504 |
| -606465757 -587854943 |
| -607085400 -587235300 3150 -450 |
| -607085400 -588111608 |
| -615696000 -588111608 |
| -615696000 -587235300 2700 -450 |
| -616315643 -587854943 |
| -623200482 -580970104 |
| -623335186 -581104808 450 450 |
| -623335186 -580914308 |
| -624087872 -580914308 |
| -624087872 -581104808 900 593 |
| -624251838 -581007826 |
| -625891500 -580038000 3293 -1392 |
| -627766501 -580374790 |
| -627954000 -580408469 101 1596 |
| -628141499 -580374790 |
| -630016500 -580038000 3498 -1596 |
| -631891501 -580374790 |
| -632079000 -580408469 101 1596 |
| -632266499 -580374790 |
| -634141500 -580038000 3498 -492 |
| -633171674 -581677662 |
| -633074692 -581841628 1206 593 |
| -633265192 -581841628 |
| -633265192 -582454159 |
| -633074692 -582454159 1800 1183 |
| -632984175 -582621780 |
| -632079000 -584298000 1183 -1081 |
| -630203999 -583961210 |
| -630016500 -583927531 1901 1596 |
| -629829001 -583961210 |
| -627954000 -584298000 1698 -1596 |
| -626078999 -583961210 |
| -625891500 -583927531 1901 1596 |
| -625704001 -583961210 |
| -623829000 -584298000 1698 -2768 |
| -624385570 -586119891 |
| -624441227 -586302079 730 1519 |
| -624575931 -586436783 |
| -624342829 -586669885 |
| -624962472 -587289528 450 -198 |
| -624168977 -586917665 |
| -623996480 -586836826 2051 198 |
| -624131184 -586971530 |
| -622587075 -588515639 |
| -622452371 -588380935 2250 538 |
| -622422964 -588569152 |
| -622173000 -590169000 988 -1500 |
| -621157564 -591430304 |
| -621038102 -591578692 1288 1411 |
| -621038102 -591769192 |
| -605844283 -591769192 |
| -605844283 -591578692 2700 559 |
| -605686455 -591685372 |
| -604266000 -592645500 1459 -2918 |
| -605686455 -593605628 |
| -605844283 -593712308 340 559 |
| -605844283 -593521808 |
| -623731500 -593521808 |
| -623731500 -592645500 2700 -450 |
| -624351143 -593265143 |
| -631423285 -586193001 |
| -631557989 -586327705 450 593 |
| -631605353 -586143187 |
| -632079000 -584298000 2843 -427 |
| -632984175 -585974220 |
| -633074692 -586141841 616 1183 |
| -633265192 -586141841 |
| -633265192 -587283614 |
| -633074692 -587283614 1800 450 |
| -633209396 -587418318 |
| -630588075 -590039639 |
| -630453371 -589904935 2250 538 |
| -630423964 -590093152 |
| -630174000 -591693000 988 -2877 |
| -631773848 -591443036 |
| -631962065 -591413629 3511 538 |
| -631827361 -591278925 |
| -634761143 -588345143 |
| -634141500 -587725500 2250 -270 |
| -634974931 -587996256 |
| -635156110 -588055115 179 1511 |
| -635343232 -588019398 |
| -636204000 -587855100 3491 -341 |
| -635584357 -588474743 |
| -635718896 -588609282 |
| -635584192 -588743986 1350 450 |
| -635774692 -588743986 |
| -635774692 -590114717 |
| -635584192 -590114717 1800 559 |
| -635690872 -590272545 |
| -636651000 -591693000 559 -2357 |
| -638365494 -591700027 |
| -638555992 -591700808 2 21 |
| -638365652 -591693000 |
| -638555992 -591685192 3576 21 |
| -638365494 -591685973 |
| -636651000 -591693000 1797 -557 |
| -637611128 -590272545 |
| -637717808 -590114717 3040 559 |
| -637527308 -590114717 |
| -637527308 -588302100 |
| -636651000 -588302100 1800 -450 |
| -637270643 -587682457 |
| -637136104 -587547918 |
| -637270808 -587413214 3150 450 |
| -637080308 -587413214 |
| -637080308 -586101628 |
| -637270808 -586101628 0 593 |
| -637173826 -585937662 |
| -636204000 -584298000 2393 -492 |
| -638079001 -584634790 |
| -638266500 -584668469 101 1596 |
| -638453999 -584634790 |
| -640329000 -584298000 3498 -492 |
| -639359174 -585937662 |
| -639262192 -586101628 1206 593 |
| -639452692 -586101628 |
| -639452692 -588017700 |
| -640329000 -588017700 0 -288 |
| -639561121 -588439929 |
| -639394192 -588531717 1511 288 |
| -639584692 -588531717 |
| -639584692 -589787992 |
| -639394192 -589787992 1800 900 |
| -639394192 -589978492 |
| -639318000 -589978492 |
| -639318000 -590550000 900 -900 |
| -638746492 -590550000 |
| -638746492 -591685192 |
| -638555992 -591685192 1800 23 |
| -638746332 -591693000 |
| -638555992 -591700808 1776 23 |
| -638746492 -591700808 |
| -638746492 -592836000 |
| -639318000 -592836000 0 -900 |
| -639318000 -593407508 |
| -641604000 -593407508 |
| -641604000 -592836000 2700 -900 |
| -642175508 -592836000 |
| -642175508 -590550000 |
| -641604000 -590550000 1800 -900 |
| -641604000 -589978492 |
| -641527808 -589978492 |
| -641527808 -589787992 2700 900 |
| -641337308 -589787992 |
| -641337308 -588149700 |
| -640461000 -588149700 1800 -288 |
| -641228879 -587727471 |
| -641395808 -587635683 3311 288 |
| -641205308 -587635683 |
| -641205308 -586101628 |
| -641395808 -586101628 0 593 |
| -641298826 -585937662 |
| -640329000 -584298000 2393 -2292 |
| -638453999 -583961210 |
| -638266500 -583927531 1901 1596 |
| -638079001 -583961210 |
| -636204000 -584298000 1698 -1081 |
| -635298825 -582621780 |
| -635208308 -582454159 2416 1183 |
| -635017808 -582454159 |
| -635017808 -581841628 |
| -635208308 -581841628 0 593 |
| -635111326 -581677662 |
| -634141500 -580038000 2393 -492 |
| -636016501 -580374790 |
| -636204000 -580408469 101 1596 |
| -636391499 -580374790 |
| -638266500 -580038000 3498 -2742 |
| -637792853 -578192813 |
| -637745489 -578008295 2556 593 |
| -637610785 -578142999 |
| -634310543 -574842757 |
| -633690900 -575462400 1350 -450 |
| -633690900 -574586092 |
| -584301600 -574586092 |
| -584301600 -575462400 900 -450 |
| -583681957 -574842757 |
| -579997371 -578527343 |
| -579862667 -578392639 2250 559 |
| -579826500 -578579674 |
| -579501000 -580263000 1009 -1007 |
| -577786499 -580258031 |
| -577596000 -580257479 1801 14 |
| -577786420 -580263000 |
| -577596000 -580268521 1783 14 |
| -577786499 -580267969 |
| -579501000 -580263000 3598 -135 |
| -577835074 -580668250 |
| -577649972 -580713278 1663 1486 |
| -577515268 -580847982 |
| -577426657 -580759371 |
| -577561361 -580624667 3150 559 |
| -577374326 -580588500 |
| -575691000 -580263000 1909 -107 |
| -577405501 -580267969 |
| -577596000 -580268521 1 14 |
| -577405580 -580263000 |
| -577596000 -580257479 3583 14 |
| -577405501 -580258031 |
| -575691000 -580263000 1798 -1796 |
| -573976499 -580258031 |
| -573786000 -580257479 1801 14 |
| -573976420 -580263000 |
| -573786000 -580268521 1783 14 |
| -573976499 -580267969 |
| -575691000 -580263000 3598 -107 |
| -574007674 -580588500 |
| -573820639 -580624667 1690 559 |
| -573955343 -580759371 |
| -573866732 -580847982 |
| -573732028 -580713278 2250 1486 |
| -573546926 -580668250 |
| -571881000 -580263000 1936 -135 |
| -573595501 -580267969 |
| -573786000 -580268521 1 14 |
| -573595580 -580263000 |
| -573786000 -580257479 3583 14 |
| -573595501 -580258031 |
| -571881000 -580263000 1798 -1457 |
| -570460545 -579302872 |
| -570302717 -579196192 2140 559 |
| -570302717 -579386692 |
| -567598486 -579386692 |
| -567598486 -579196192 2700 450 |
| -567463782 -579330896 |
| -564042443 -575909557 |
| -563422800 -576529200 1350 -450 |
| -563422800 -575652892 |
| -544372800 -575652892 |
| -544372800 -576529200 900 -450 |
| -543753157 -575909557 |
| -533580457 -586082257 |
| -534200100 -586701900 450 -450 |
| -533323792 -586701900 |
| -533323792 -637753500 |
| -533323792 -639855600 |
| -534200100 -639855600 0 -450 |
| -533580457 -640475243 |
| -534327999 -641222785 |
| -534193295 -641357489 1350 593 |
| -534377813 -641404853 |
| -536223000 -641878500 143 -942 |
| -535886210 -643753501 |
| -535852531 -643941000 1001 1596 |
| -535886210 -644128499 |
| -536223000 -646003500 798 -2292 |
| -537862662 -646973326 |
| -538026628 -647070308 306 593 |
| -538026628 -646879808 |
| -538639159 -646879808 |
| -538639159 -647070308 900 1183 |
| -538806780 -647160825 |
| -540483000 -648066000 283 -1327 |
| -540956647 -649911187 |
| -541004011 -650095705 756 593 |
| -541138715 -649961001 |
| -567699010 -676521296 |
| -567564306 -676656000 1350 1350 |
| -567564306 -676846500 |
| -525399000 -676846500 |
| -525399000 -676656000 2700 900 |
| -525208500 -676656000 |
| ANP000089 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -559498508 -585978000 |
| -556069492 -585978000 |
| ANP000090 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 67 52 381000 1 |
| -581596420 -591693000 |
| -581406000 -591698521 1783 14 |
| -581596499 -591697969 |
| -583311000 -591693000 3598 -1007 |
| -583636500 -593376326 |
| -583672667 -593563361 790 559 |
| -583807371 -593428657 |
| -586958557 -596579843 |
| -587578200 -595960200 3150 -450 |
| -587578200 -596836508 |
| -591898814 -596836508 |
| -591898814 -597027008 900 450 |
| -592033518 -596892304 |
| -605768843 -610627629 |
| -605634139 -610762333 1350 559 |
| -605821174 -610798500 |
| -607504500 -611124000 109 -2918 |
| -607179000 -609440674 |
| -607142833 -609253639 2590 559 |
| -607008129 -609388343 |
| -597432158 -599812372 |
| -597566862 -599677668 3150 1533 |
| -597626940 -599496889 |
| -597903300 -598665300 2883 -183 |
| -597903300 -599541608 |
| -600699914 -599541608 |
| -600699914 -599732108 900 450 |
| -600834618 -599597404 |
| -605768843 -604531629 |
| -605634139 -604666333 1350 559 |
| -605821174 -604702500 |
| -607504500 -605028000 109 -2918 |
| -607179000 -603344674 |
| -607142833 -603157639 2590 559 |
| -607008129 -603292343 |
| -601761443 -598045657 |
| -601141800 -598665300 1350 -450 |
| -601141800 -597788992 |
| -598345186 -597788992 |
| -598345186 -597598492 2700 450 |
| -598210482 -597733196 |
| -594156018 -593678732 |
| -594290722 -593544028 3150 1486 |
| -594335750 -593358926 |
| -594741000 -591693000 2836 -1034 |
| -596455494 -591700027 |
| -596645992 -591700808 2 21 |
| -596455652 -591693000 |
| -596645992 -591685192 3576 21 |
| -596455494 -591685973 |
| -594741000 -591693000 1797 -1795 |
| -593026499 -591688031 |
| -592836000 -591687479 1801 14 |
| -593026420 -591693000 |
| -592836000 -591698521 1783 14 |
| -593026499 -591697969 |
| -594741000 -591693000 3598 -135 |
| -593075074 -592098250 |
| -592889972 -592143278 1663 1486 |
| -592755268 -592277982 |
| -592666657 -592189371 |
| -592801361 -592054667 3150 559 |
| -592614326 -592018500 |
| -590931000 -591693000 1909 -107 |
| -592645501 -591697969 |
| -592836000 -591698521 1 14 |
| -592645580 -591693000 |
| -592836000 -591687479 3583 14 |
| -592645501 -591688031 |
| -590931000 -591693000 1798 -1796 |
| -589216499 -591688031 |
| -589026000 -591687479 1801 14 |
| -589216420 -591693000 |
| -589026000 -591698521 1783 14 |
| -589216499 -591697969 |
| -590931000 -591693000 3598 -1007 |
| -591256500 -593376326 |
| -591292667 -593563361 790 559 |
| -591427371 -593428657 |
| -592811842 -594813128 |
| -592677138 -594947832 1350 1533 |
| -592617060 -595128611 |
| -592340700 -595960200 1083 -183 |
| -592340700 -595083892 |
| -588020086 -595083892 |
| -588020086 -594893392 2700 450 |
| -587885382 -595028096 |
| -586536018 -593678732 |
| -586670722 -593544028 3150 1486 |
| -586715750 -593358926 |
| -587121000 -591693000 2836 -1035 |
| -588835501 -591697969 |
| -589026000 -591698521 1 14 |
| -588835580 -591693000 |
| -589026000 -591687479 3583 14 |
| -588835501 -591688031 |
| -587121000 -591693000 1798 -1796 |
| -585406499 -591688031 |
| -585216000 -591687479 1801 14 |
| -585406420 -591693000 |
| -585216000 -591698521 1783 14 |
| -585406499 -591697969 |
| -587121000 -591693000 3598 -135 |
| -585455074 -592098250 |
| -585269972 -592143278 1663 1486 |
| -585135268 -592277982 |
| -585046657 -592189371 |
| -585181361 -592054667 3150 559 |
| -584994326 -592018500 |
| -583311000 -591693000 1909 -107 |
| -585025501 -591697969 |
| -585216000 -591698521 1 14 |
| -585025580 -591693000 |
| -585216000 -591687479 3583 14 |
| -585025501 -591688031 |
| -583311000 -591693000 1798 -1796 |
| -581596499 -591688031 |
| -581406000 -591687479 1801 14 |
| -581596420 -591693000 |
| ANP000091 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 194 141 381000 1 |
| -573976420 -591693000 |
| -573786000 -591698521 1783 14 |
| -573976499 -591697969 |
| -575691000 -591693000 3598 -1007 |
| -576016500 -593376326 |
| -576052667 -593563361 790 559 |
| -576187371 -593428657 |
| -583339057 -600580343 |
| -583958700 -599960700 3150 -450 |
| -583958700 -600837008 |
| -590260514 -600837008 |
| -590260514 -601027508 900 450 |
| -590395218 -600892804 |
| -605873248 -616370834 |
| -605738544 -616505538 1350 670 |
| -605915139 -616576984 |
| -607504500 -617220000 220 -456 |
| -605933123 -617905793 |
| -605758526 -617981992 1564 1135 |
| -605758526 -618172492 |
| -604822186 -618172492 |
| -604822186 -617981992 2700 450 |
| -604687482 -618116696 |
| -595905157 -609334371 |
| -596039861 -609199667 3150 559 |
| -595852826 -609163500 |
| -594169500 -608838000 1909 -2918 |
| -594495000 -610521326 |
| -594531167 -610708361 790 559 |
| -594665871 -610573657 |
| -602930102 -618837888 |
| -602795398 -618972592 1350 1350 |
| -602795398 -619163092 |
| -600478786 -619163092 |
| -600478786 -618972592 2700 450 |
| -600344082 -619107296 |
| -595905157 -614668371 |
| -596039861 -614533667 3150 559 |
| -595852826 -614497500 |
| -594169500 -614172000 1909 -2918 |
| -594495000 -615855326 |
| -594531167 -616042361 790 559 |
| -594665871 -615907657 |
| -597062702 -618304488 |
| -596927998 -618439192 1350 1350 |
| -596927998 -618629692 |
| -595747783 -618629692 |
| -595747783 -618439192 2700 559 |
| -595589955 -618545872 |
| -594169500 -619506000 1459 -2918 |
| -595589955 -620466128 |
| -595747783 -620572808 340 559 |
| -595747783 -620382308 |
| -596547014 -620382308 |
| -596547014 -620572808 900 450 |
| -596681718 -620438104 |
| -597893257 -621649643 |
| -598512900 -621030000 3150 -450 |
| -598512900 -621906308 |
| -621845398 -621906308 |
| -621845398 -622096808 900 1350 |
| -621980102 -622231512 |
| -620303718 -623907896 |
| -620169014 -623773192 2250 450 |
| -620169014 -623963692 |
| -595747783 -623963692 |
| -595747783 -623773192 2700 559 |
| -595589955 -623879872 |
| -594169500 -624840000 1459 -2918 |
| -595589955 -625800128 |
| -595747783 -625906808 340 559 |
| -595747783 -625716308 |
| -619445098 -625716308 |
| -619445098 -625906808 900 1350 |
| -619579802 -626041512 |
| -613636218 -631985096 |
| -613501514 -631850392 2250 450 |
| -613501514 -632040892 |
| -612724200 -632040892 |
| -612724200 -632917200 900 -450 |
| -612104557 -632297557 |
| -596227971 -648174143 |
| -596093267 -648039439 2250 559 |
| -596057100 -648226474 |
| -595731600 -649909800 1009 -1007 |
| -594017099 -649904831 |
| -593826600 -649904279 1801 14 |
| -594017020 -649909800 |
| -593826600 -649915321 1783 14 |
| -594017099 -649914769 |
| -595731600 -649909800 3598 -46 |
| -594023197 -650054352 |
| -593833375 -650070413 1751 1398 |
| -593698671 -650205117 |
| -593686140 -650192586 |
| -593820844 -650057882 3150 494 |
| -593630920 -650043074 |
| -591921600 -649909800 1844 -42 |
| -593636101 -649914769 |
| -593826600 -649915321 1 14 |
| -593636180 -649909800 |
| -593826600 -649904279 3583 14 |
| -593636101 -649904831 |
| -591921600 -649909800 1798 -1392 |
| -590618689 -648795367 |
| -590473922 -648671542 2205 494 |
| -590473922 -648862042 |
| -588586404 -648862042 |
| -588586404 -648671542 2700 450 |
| -588451700 -648806246 |
| -585385377 -645739923 |
| -584644500 -646480800 1350 -450 |
| -584644500 -645433042 |
| -582244078 -645433042 |
| -582244078 -645242542 2700 494 |
| -582099311 -645366367 |
| -580796400 -646480800 1394 -2789 |
| -582099311 -647595233 |
| -582244078 -647719058 405 494 |
| -582244078 -647528558 |
| -584131596 -647528558 |
| -584131596 -647719058 900 450 |
| -584266300 -647584354 |
| -587332623 -650650677 |
| -588073500 -649909800 3150 -450 |
| -588073500 -650957558 |
| -590473922 -650957558 |
| -590473922 -651148058 900 494 |
| -590618689 -651024233 |
| -591921600 -649909800 3194 -539 |
| -592054874 -651619120 |
| -592069682 -651809044 855 494 |
| -592204386 -651674340 |
| -593180973 -652650927 |
| -593921850 -651910050 3150 -450 |
| -593921850 -652957808 |
| -620396516 -652957808 |
| -620396516 -651910050 2700 -450 |
| -621137393 -652650927 |
| -622508266 -651280054 |
| -622642970 -651414758 450 450 |
| -622642970 -651224258 |
| -623506622 -651224258 |
| -623506622 -651414758 900 494 |
| -623651389 -651290933 |
| -624954300 -650176500 3194 -539 |
| -625087574 -651885820 |
| -625102382 -652075744 855 494 |
| -625237086 -651941040 |
| -626213673 -652917627 |
| -626954550 -652176750 3150 -450 |
| -626954550 -653224508 |
| -658067250 -653224508 |
| -658067250 -652176750 2700 -450 |
| -658808127 -652917627 |
| -661723496 -650002258 |
| -661858200 -650136962 450 537 |
| -661887273 -649948693 |
| -662178000 -648066000 2787 -1271 |
| -663854220 -647160825 |
| -664021841 -647070308 3316 1183 |
| -664021841 -646879808 |
| -664409372 -646879808 |
| -664409372 -647070308 900 593 |
| -664573338 -646973326 |
| -666213000 -646003500 3293 -2292 |
| -666549790 -644128499 |
| -666583469 -643941000 2801 1596 |
| -666549790 -643753501 |
| -666213000 -641878500 2598 -1596 |
| -666549790 -640003499 |
| -666583469 -639816000 2801 1596 |
| -666549790 -639628501 |
| -666213000 -637753500 2598 -1596 |
| -666549790 -635878499 |
| -666583469 -635691000 2801 1596 |
| -666549790 -635503501 |
| -666213000 -633628500 2598 -1596 |
| -666549790 -631753499 |
| -666583469 -631566000 2801 1596 |
| -666549790 -631378501 |
| -666213000 -629503500 2598 -1596 |
| -666549790 -627628499 |
| -666583469 -627441000 2801 1596 |
| -666549790 -627253501 |
| -666213000 -625378500 2598 -1596 |
| -666549790 -623503499 |
| -666583469 -623316000 2801 1596 |
| -666549790 -623128501 |
| -666213000 -621253500 2598 -1596 |
| -666549790 -619378499 |
| -666583469 -619191000 2801 1596 |
| -666549790 -619003501 |
| -666213000 -617128500 2598 -1596 |
| -666549790 -615253499 |
| -666583469 -615066000 2801 1596 |
| -666549790 -614878501 |
| -666213000 -613003500 2598 -1596 |
| -666549790 -611128499 |
| -666583469 -610941000 2801 1596 |
| -666549790 -610753501 |
| -666213000 -608878500 2598 -1596 |
| -666549790 -607003499 |
| -666583469 -606816000 2801 1596 |
| -666549790 -606628501 |
| -666213000 -604753500 2598 -1596 |
| -666549790 -602878499 |
| -666583469 -602691000 2801 1596 |
| -666549790 -602503501 |
| -666213000 -600628500 2598 -3396 |
| -665876210 -602503501 |
| -665842531 -602691000 1001 1596 |
| -665876210 -602878499 |
| -666213000 -604753500 798 -492 |
| -664573338 -603783674 |
| -664409372 -603686692 2106 593 |
| -664409372 -603877192 |
| -664021841 -603877192 |
| -664021841 -603686692 2700 1183 |
| -663854220 -603596175 |
| -662178000 -602691000 2083 -1081 |
| -662514790 -600815999 |
| -662548469 -600628500 2801 1596 |
| -662514790 -600441001 |
| -662178000 -598566000 2598 -3396 |
| -661841210 -600441001 |
| -661807531 -600628500 1001 1596 |
| -661841210 -600815999 |
| -662178000 -602691000 798 -492 |
| -660538338 -601721174 |
| -660374372 -601624192 2106 593 |
| -660374372 -601814692 |
| -643747486 -601814692 |
| -643747486 -601624192 2700 450 |
| -643612782 -601758896 |
| -640166243 -598312357 |
| -639546600 -598932000 1350 -450 |
| -639546600 -598055692 |
| -622417783 -598055692 |
| -622417783 -597865192 2700 559 |
| -622259955 -597971872 |
| -620839500 -598932000 1459 -2918 |
| -622259955 -599892128 |
| -622417783 -599998808 340 559 |
| -622417783 -599808308 |
| -639104714 -599808308 |
| -639104714 -599998808 900 450 |
| -639239418 -599864104 |
| -642685957 -603310643 |
| -643305600 -602691000 3150 -239 |
| -642991005 -603508891 |
| -642922616 -603686692 1110 1589 |
| -642922616 -603877192 |
| -642069000 -603877192 |
| -642069000 -604753500 900 -420 |
| -641482193 -604102675 |
| -641354628 -603961192 2279 420 |
| -641354628 -604151692 |
| -622417783 -604151692 |
| -622417783 -603961192 2700 559 |
| -622259955 -604067872 |
| -620839500 -605028000 1459 -2918 |
| -622259955 -605988128 |
| -622417783 -606094808 340 559 |
| -622417783 -605904308 |
| -627560398 -605904308 |
| -627560398 -606094808 900 1350 |
| -627695102 -606229512 |
| -623732718 -610191896 |
| -623598014 -610057192 2250 450 |
| -623598014 -610247692 |
| -622417783 -610247692 |
| -622417783 -610057192 2700 559 |
| -622259955 -610163872 |
| -620839500 -611124000 1459 -2918 |
| -622259955 -612084128 |
| -622417783 -612190808 340 559 |
| -622417783 -612000308 |
| -624039900 -612000308 |
| -624039900 -611124000 2700 -218 |
| -624365622 -611937524 |
| -624436431 -612114375 681 1568 |
| -624571135 -612249079 |
| -621335871 -615484343 |
| -621201167 -615349639 2250 559 |
| -621165000 -615536674 |
| -620839500 -617220000 1009 -1245 |
| -619268123 -617905793 |
| -619093526 -617981992 1564 1135 |
| -619093526 -618172492 |
| -609250474 -618172492 |
| -609250474 -617981992 2700 1135 |
| -609075877 -617905793 |
| -607504500 -617220000 2035 -1117 |
| -607560203 -615506397 |
| -607566392 -615315998 2718 431 |
| -607431688 -615450702 |
| -591322043 -599341057 |
| -590702400 -599960700 1350 -450 |
| -590702400 -599084392 |
| -584400586 -599084392 |
| -584400586 -598893892 2700 450 |
| -584265882 -599028596 |
| -578916018 -593678732 |
| -579050722 -593544028 3150 1486 |
| -579095750 -593358926 |
| -579501000 -591693000 2836 -1035 |
| -581215501 -591697969 |
| -581406000 -591698521 1 14 |
| -581215580 -591693000 |
| -581406000 -591687479 3583 14 |
| -581215501 -591688031 |
| -579501000 -591693000 1798 -1796 |
| -577786499 -591688031 |
| -577596000 -591687479 1801 14 |
| -577786420 -591693000 |
| -577596000 -591698521 1783 14 |
| -577786499 -591697969 |
| -579501000 -591693000 3598 -135 |
| -577835074 -592098250 |
| -577649972 -592143278 1663 1486 |
| -577515268 -592277982 |
| -577426657 -592189371 |
| -577561361 -592054667 3150 559 |
| -577374326 -592018500 |
| -575691000 -591693000 1909 -107 |
| -577405501 -591697969 |
| -577596000 -591698521 1 14 |
| -577405580 -591693000 |
| -577596000 -591687479 3583 14 |
| -577405501 -591688031 |
| -575691000 -591693000 1798 -1796 |
| -573976499 -591688031 |
| -573786000 -591687479 1801 14 |
| -573976420 -591693000 |
| ANP000092 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -573595501 -591688031 |
| -571881000 -591693000 1798 -3596 |
| -573595501 -591697969 |
| -573786000 -591698521 1 14 |
| -573595580 -591693000 |
| -573786000 -591687479 3583 14 |
| -573595501 -591688031 |
| ANP000093 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 36 23 381000 1 |
| -562127392 -599846400 |
| -562127392 -602132400 |
| -562698900 -602132400 0 -900 |
| -562698900 -602703908 |
| -563834092 -602703908 |
| -563834092 -602894408 900 23 |
| -563841900 -602704068 |
| -563849708 -602894408 876 23 |
| -563849708 -602703908 |
| -564238214 -602703908 |
| -564238214 -602894408 900 450 |
| -564372918 -602759704 |
| -564426882 -602813668 |
| -564292178 -602948372 1350 1486 |
| -564247150 -603133474 |
| -563841900 -604799400 1036 -134 |
| -563848927 -603084906 |
| -563849708 -602894408 2702 21 |
| -563841900 -603084748 |
| -563834092 -602894408 2676 21 |
| -563834873 -603084906 |
| -563841900 -604799400 897 -1795 |
| -563836931 -606513901 |
| -563836379 -606704400 901 14 |
| -563841900 -606513980 |
| -563847421 -606704400 883 14 |
| -563846869 -606513901 |
| -563841900 -604799400 2698 -1035 |
| -565507826 -604394150 |
| -565692928 -604349122 3463 1486 |
| -565827632 -604214418 |
| -567298957 -605685743 |
| -567918600 -605066100 3150 -450 |
| -567918600 -605942408 |
| -576620714 -605942408 |
| -576620714 -606132908 900 450 |
| -576755418 -605998204 |
| -579098843 -608341629 |
| -578964139 -608476333 1350 559 |
| -579151174 -608512500 |
| -580834500 -608838000 109 -2918 |
| -580509000 -607154674 |
| -580472833 -606967639 2590 559 |
| -580338129 -607102343 |
| -577682243 -604446457 |
| -577062600 -605066100 1350 -450 |
| -577062600 -604189792 |
| -568360486 -604189792 |
| -568360486 -603999292 2700 450 |
| -568225782 -604133996 |
| -565612204 -601520418 |
| -565746908 -601385714 3150 450 |
| -565556408 -601385714 |
| -565556408 -599846400 |
| -564984900 -599846400 1800 -900 |
| -564984900 -599274892 |
| -562698900 -599274892 |
| -562698900 -599846400 900 -900 |
| -562127392 -599846400 |
| ANP000094 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -606894899 |
| -563841900 -608609400 898 -1796 |
| -563836931 -610323901 |
| -563836379 -610514400 901 14 |
| -563841900 -610323980 |
| -563847421 -610514400 883 14 |
| -563846869 -610323901 |
| -563841900 -608609400 2698 -557 |
| -565262355 -609569528 |
| -565420183 -609676208 340 559 |
| -565420183 -609485708 |
| -566829014 -609485708 |
| -566829014 -609676208 900 450 |
| -566963718 -609541504 |
| -572213857 -614791643 |
| -572833500 -614172000 3150 -450 |
| -572833500 -615048308 |
| -579256217 -615048308 |
| -579256217 -615238808 900 559 |
| -579414045 -615132128 |
| -580834500 -614172000 3259 -2918 |
| -579414045 -613211872 |
| -579256217 -613105192 2140 559 |
| -579256217 -613295692 |
| -573275386 -613295692 |
| -573275386 -613105192 2700 450 |
| -573140682 -613239896 |
| -567890543 -607989757 |
| -567270900 -608609400 1350 -450 |
| -567270900 -607733092 |
| -565420183 -607733092 |
| -565420183 -607542592 2700 559 |
| -565262355 -607649272 |
| -563841900 -608609400 1459 -557 |
| -563846869 -606894899 |
| -563847421 -606704400 2701 14 |
| -563841900 -606894820 |
| -563836379 -606704400 2683 14 |
| -563836931 -606894899 |
| ANP000095 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -610704899 |
| -563841900 -612419400 898 -1796 |
| -563836931 -614133901 |
| -563836379 -614324400 901 14 |
| -563841900 -614133980 |
| -563847421 -614324400 883 14 |
| -563846869 -614133901 |
| -563841900 -612419400 2698 -1796 |
| -563846869 -610704899 |
| -563847421 -610514400 2701 14 |
| -563841900 -610704820 |
| -563836379 -610514400 2683 14 |
| -563836931 -610704899 |
| ANP000096 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -614514899 |
| -563841900 -616229400 898 -1796 |
| -563836931 -617943901 |
| -563836379 -618134400 901 14 |
| -563841900 -617943980 |
| -563847421 -618134400 883 14 |
| -563846869 -617943901 |
| -563841900 -616229400 2698 -557 |
| -565262355 -617189528 |
| -565420183 -617296208 340 559 |
| -565420183 -617105708 |
| -569115014 -617105708 |
| -569115014 -617296208 900 450 |
| -569249718 -617161504 |
| -572213857 -620125643 |
| -572833500 -619506000 3150 -450 |
| -572833500 -620382308 |
| -579256217 -620382308 |
| -579256217 -620572808 900 559 |
| -579414045 -620466128 |
| -580834500 -619506000 3259 -2918 |
| -579414045 -618545872 |
| -579256217 -618439192 2140 559 |
| -579256217 -618629692 |
| -573275386 -618629692 |
| -573275386 -618439192 2700 450 |
| -573140682 -618573896 |
| -570176543 -615609757 |
| -569556900 -616229400 1350 -450 |
| -569556900 -615353092 |
| -565420183 -615353092 |
| -565420183 -615162592 2700 559 |
| -565262355 -615269272 |
| -563841900 -616229400 1459 -557 |
| -563846869 -614514899 |
| -563847421 -614324400 2701 14 |
| -563841900 -614514820 |
| -563836379 -614324400 2683 14 |
| -563836931 -614514899 |
| ANP000097 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -618324899 |
| -563841900 -620039400 898 -1796 |
| -563836931 -621753901 |
| -563836379 -621944400 901 14 |
| -563841900 -621753980 |
| -563847421 -621944400 883 14 |
| -563846869 -621753901 |
| -563841900 -620039400 2698 -1796 |
| -563846869 -618324899 |
| -563847421 -618134400 2701 14 |
| -563841900 -618324820 |
| -563836379 -618134400 2683 14 |
| -563836931 -618324899 |
| ANP000098 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -622134899 |
| -563841900 -623849400 898 -1796 |
| -563836931 -625563901 |
| -563836379 -625754400 901 14 |
| -563841900 -625563980 |
| -563847421 -625754400 883 14 |
| -563846869 -625563901 |
| -563841900 -623849400 2698 -557 |
| -565262355 -624809528 |
| -565420183 -624916208 340 559 |
| -565420183 -624725708 |
| -571401014 -624725708 |
| -571401014 -624916208 900 450 |
| -571535718 -624781504 |
| -572213857 -625459643 |
| -572833500 -624840000 3150 -450 |
| -572833500 -625716308 |
| -579256217 -625716308 |
| -579256217 -625906808 900 559 |
| -579414045 -625800128 |
| -580834500 -624840000 3259 -2918 |
| -579414045 -623879872 |
| -579256217 -623773192 2140 559 |
| -579256217 -623963692 |
| -573275386 -623963692 |
| -573275386 -623773192 2700 450 |
| -573140682 -623907896 |
| -572462543 -623229757 |
| -571842900 -623849400 1350 -450 |
| -571842900 -622973092 |
| -565420183 -622973092 |
| -565420183 -622782592 2700 559 |
| -565262355 -622889272 |
| -563841900 -623849400 1459 -557 |
| -563846869 -622134899 |
| -563847421 -621944400 2701 14 |
| -563841900 -622134820 |
| -563836379 -621944400 2683 14 |
| -563836931 -622134899 |
| ANP000099 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -658341000 |
| -660139642 -658341000 |
| ANP000100 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -669036000 |
| -663964492 -669036000 |
| ANP000101 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -563836931 -625944899 |
| -563841900 -627659400 898 -3596 |
| -563846869 -625944899 |
| -563847421 -625754400 2701 14 |
| -563841900 -625944820 |
| -563836379 -625754400 2683 14 |
| -563836931 -625944899 |
| ANP000102 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 20 11 381000 1 |
| -596836332 -591693000 |
| -596645992 -591700808 1776 23 |
| -596836492 -591700808 |
| -596836492 -592836000 |
| -597408000 -592836000 0 -900 |
| -597408000 -593407508 |
| -598947314 -593407508 |
| -598947314 -593598008 900 450 |
| -599082018 -593463304 |
| -605170357 -599551643 |
| -605790000 -598932000 3150 -450 |
| -605790000 -599808308 |
| -605926217 -599808308 |
| -605926217 -599998808 900 559 |
| -606084045 -599892128 |
| -607504500 -598932000 3259 -2853 |
| -606203089 -597815815 |
| -606058489 -597691795 2206 943 |
| -605923785 -597826499 |
| -600321304 -592224018 |
| -600456008 -592089314 3150 450 |
| -600265508 -592089314 |
| -600265508 -590550000 |
| -599694000 -590550000 1800 -900 |
| -599694000 -589978492 |
| -597408000 -589978492 |
| -597408000 -590550000 900 -900 |
| -596836492 -590550000 |
| -596836492 -591685192 |
| -596645992 -591685192 1800 23 |
| -596836332 -591693000 |
| ANP000103 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -577596000 |
| -663964492 -577596000 |
| ANP000104 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -588291000 |
| -660139642 -588291000 |
| ANP000105 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -654502358 -582168000 |
| -646615642 -582168000 |
| ANP000106 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -577596000 |
| -528328492 -577596000 |
| ANP000107 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -552406931 -625944899 |
| -552411900 -627659400 898 -3596 |
| -552416869 -625944899 |
| -552417421 -625754400 2701 14 |
| -552411900 -625944820 |
| -552406379 -625754400 2683 14 |
| -552406931 -625944899 |
| ANP000108 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -542296358 -658341000 |
| -534409642 -658341000 |
| ANP000109 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -669036000 |
| -528328492 -669036000 |
| HP27860889 POUROUT 25527000 115824000 1 0 |
| POLY 3 0 381000 1 |
| 0 0 |
| 0 762000 |
| 0 0 |
| *TESTPOINT* |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| DFT_CONFIGURATION PARENT |
| { |
| UNITS MILS |
| PROBING_STRATEGY PARENT |
| { |
| PROBE_TOP_SIDE NO |
| PROBE_VIAS YES |
| PROBE_NO_CONNECT NO |
| } |
| DFT_RULES PARENT |
| { |
| PROBE 100 |
| { |
| DRILL_SIZE 69 |
| ENABLE YES |
| } |
| PROBE 75 |
| { |
| DRILL_SIZE 43 |
| ENABLE NO |
| } |
| PROBE 50 |
| { |
| DRILL_SIZE 30 |
| ENABLE NO |
| } |
| MIN_VIA_SIZE 25 |
| MIN_PAD_SIZE 25 |
| PIN_TO_PIN 14 |
| PIN_TO_BOARD 125 |
| PIN_TO_COMPONENT 0 |
| } |
| DIF_FILE PARENT |
| { |
| VIA_PREFIX VIA |
| TP_PART_TYPE TP100 |
| TP_PART_TYPE TP150 |
| TP_PREFIX TP |
| TP_PREFIX PN_TP |
| TP_PREFIX TP_SMD |
| TH_PART_TYPE MTHOLE1 |
| TH_PART_TYPE MTHOLE2 |
| TH_PREFIX TH |
| TH_PREFIX MH |
| NC_NET N.C. |
| INCLUDE_TP YES |
| } |
| RETURN_OPTIONS PARENT |
| { |
| AUTO_RETURN YES |
| ADD_TP_VIAS_ON_RETURN NO |
| ADD_MULTIPLE_FOR_POWERNET NO |
| TP_VIA_TYPE STANDARDVIA |
| PPCB_NOT_CONNECTED_NET_NAME NOT_CONNECTED |
| } |
| } |
| LAYER DATA |
| { |
| LAYER 0 |
| { |
| LAYER_THICKNESS 0 |
| DIELECTRIC 3.300000 |
| } |
| LAYER 1 |
| { |
| LAYER_NAME Top |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION HORIZONTAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Top |
| ASSOCIATED_PASTE_MASK Paste Mask Top |
| ASSOCIATED_SOLDER_MASK Solder Mask Top |
| ASSOCIATED_ASSEMBLY Assembly Drawing Top |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 3 |
| VIA 3 |
| PAD 3 |
| COPPER 3 |
| 2DLINE 3 |
| TEXT 3 |
| ERROR 5 |
| TOPCOMPONENT 1 |
| BOTTOMCOMPONENT 0 |
| REFDES 1 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 381000 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 4.300000 |
| COST 0 |
| } |
| LAYER 2 |
| { |
| LAYER_NAME Bottom |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION VERTICAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Bottom |
| ASSOCIATED_PASTE_MASK Paste Mask Bottom |
| ASSOCIATED_SOLDER_MASK Solder Mask Bottom |
| ASSOCIATED_ASSEMBLY Assembly Drawing Bottom |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 11 |
| VIA 11 |
| PAD 11 |
| COPPER 11 |
| 2DLINE 11 |
| TEXT 11 |
| ERROR 13 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 14 |
| REFDES 14 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 3.300000 |
| COST 0 |
| } |
| LAYER 3 |
| { |
| LAYER_NAME Layer_3 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 4 |
| { |
| LAYER_NAME Layer_4 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 5 |
| { |
| LAYER_NAME Layer_5 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 6 |
| { |
| LAYER_NAME Layer_6 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 7 |
| { |
| LAYER_NAME Layer_7 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 8 |
| { |
| LAYER_NAME Layer_8 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 9 |
| { |
| LAYER_NAME Layer_9 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 10 |
| { |
| LAYER_NAME Layer_10 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 11 |
| { |
| LAYER_NAME Layer_11 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 12 |
| { |
| LAYER_NAME Layer_12 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 13 |
| { |
| LAYER_NAME Layer_13 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 14 |
| { |
| LAYER_NAME Layer_14 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 15 |
| { |
| LAYER_NAME Layer_15 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 16 |
| { |
| LAYER_NAME Layer_16 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 17 |
| { |
| LAYER_NAME Layer_17 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 18 |
| { |
| LAYER_NAME Layer_18 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 19 |
| { |
| LAYER_NAME Layer_19 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 20 |
| { |
| LAYER_NAME Layer_20 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 21 |
| { |
| LAYER_NAME Solder Mask Top |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 22 |
| { |
| LAYER_NAME Paste Mask Bottom |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 23 |
| { |
| LAYER_NAME Paste Mask Top |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 24 |
| { |
| LAYER_NAME Drill Drawing |
| LAYER_TYPE DRILL |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 5 |
| TEXT 5 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 25 |
| { |
| LAYER_NAME Layer_25 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 26 |
| { |
| LAYER_NAME Silkscreen Top |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 27 |
| { |
| LAYER_NAME Assembly Drawing Top |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 28 |
| { |
| LAYER_NAME Solder Mask Bottom |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 29 |
| { |
| LAYER_NAME Silkscreen Bottom |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 30 |
| { |
| LAYER_NAME Assembly Drawing Bottom |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| } |
| SELECTABILITY DATA |
| { |
| PARTS Y |
| PINS Y |
| TRACES Y |
| VIAS Y |
| TACKS Y |
| UNROUTED Y |
| EDGES Y |
| NODES Y |
| SHAPES Y |
| DIMENSIONS Y |
| TEXT Y |
| AREA_PARTS Y |
| AREA_PINS Y |
| AREA_TRACES Y |
| AREA_VIAS Y |
| AREA_TACKS Y |
| AREA_UNROUTED Y |
| AREA_EDGES Y |
| AREA_NODES Y |
| AREA_SHAPES Y |
| AREA_DIMENSIONS Y |
| AREA_TEXT Y |
| } |
| VISIBILITY DATA |
| { |
| PADS Y |
| TRACKS Y |
| VIAS Y |
| COPPER Y |
| LINES Y |
| TEXT Y |
| ERRORS Y |
| CLUSTER Y |
| TOP_COMPONENT Y |
| BOTTOM_COMPONENT Y |
| PLANE_THERMAL Y |
| REFDES Y |
| PARTTYPES Y |
| ATTRIBUTES Y |
| KEEPOUTS Y |
| SELECTION_COLOR 15 |
| HIGHLIGHT_COLOR 14 |
| FIXED_COLOR 3 |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION PARENT |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 609600 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| NET GND |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 952500 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 1904999936 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 38100000 |
| PARALLEL_GAP 7620000 |
| TANDEM_LENGTH 38100000 |
| TANDEM_GAP 7620000 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 7620000 |
| MATCH_LENGTH_TOLERANCE 7620000 |
| } |
| } |
| RULE_SET (4) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 1 |
| VALID_LAYER 2 |
| VALID_VIA_TYPE STANDARDVIA |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| CAM_SECTION PARENT |
| { |
| CAM_VERSION V4.0 |
| CAM_DOC_LIST PARENT |
| { |
| CAM_DOC_NAME (art001.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art001.pho |
| DOC_LAYER_NAMES Top |
| DOC_LAYER_NUMBERS 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 1 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (art002.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art002.pho |
| DOC_LAYER_NAMES Bottom |
| DOC_LAYER_NUMBERS 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 2 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (sm001021.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm001021.pho |
| DOC_LAYER_NAMES Top Solder_Mask_Top |
| DOC_LAYER_NUMBERS 1 21 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 21 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (smd002022.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd002022.pho |
| DOC_LAYER_NAMES Bottom Paste_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 22 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (smd001023.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd001023.pho |
| DOC_LAYER_NAMES Top Paste_Mask_Top |
| DOC_LAYER_NUMBERS 1 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 23 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sst001026.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sst001026.pho |
| DOC_LAYER_NAMES Top Silkscreen_Top |
| DOC_LAYER_NUMBERS 1 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 26 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES Black None |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sm002028.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm002028.pho |
| DOC_LAYER_NAMES Bottom Solder_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 28 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (ssb002029.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE ssb002029.pho |
| DOC_LAYER_NAMES Bottom Silkscreen_Bottom |
| DOC_LAYER_NUMBERS 2 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 29 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None Black |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| } |
| CAM_AUGMENT_ON_THE_FLY Y |
| CAM_DRILL_SYMBOL_TABLE PARENT |
| { |
| MARKER_SIZE 0 |
| MARKER_LINE_WIDTH 381000 |
| MARKER_CHAR_HEIGHT 0 |
| CHART_TEXT_HEIGHT 0 |
| CHART_LINE_WIDTH 0 |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE Value |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Tolerance |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Part Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Description |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Cost |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #2 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE ASSEMBLY_OPTIONS |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| INHERITANCE PART |
| INHERITANCE JUMPER |
| ECO_REGISTRATION Y |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE PowerGround |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Voltage |
| { |
| TYPE QUANTITY |
| QUANTITY Voltage |
| ABBR V |
| UNIT Volt |
| MIN -100kV |
| MAX 100kV |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Geometry.Height |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 952500000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Diameter |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Probe to Trace Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Probe to Pad Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Generate Test Points |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Allow Stubs |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Stub Length |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Use Via Grid |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid X-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid Y-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE HyperLynx.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Sim Direction |
| { |
| TYPE LIST N |
| { |
| SIM_BOTH |
| SIM_IN |
| SIM_OUT |
| } |
| INHERITANCE PIN |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Frequency |
| { |
| TYPE QUANTITY |
| QUANTITY Frequency |
| ABBR Hz |
| UNIT Hertz |
| MIN 0Hz |
| MAX 1000GHz |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Duty Cycle |
| { |
| TYPE QUANTITY |
| QUANTITY |
| ABBR % |
| UNIT percent |
| MIN 0% |
| MAX 100% |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Signal Type |
| { |
| TYPE LIST N |
| { |
| Address |
| Analog High Speed |
| Analog Low Speed |
| Clock |
| Data |
| Do Not Analyze |
| Power Supply |
| Strobe |
| } |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model Pin |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Strategy.Fanout.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.FormatId |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipWidth |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipHeight |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MinLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WToWDistance |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WBtoPad |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxAngle |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WB1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuideCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuide1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPAssignment1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Marker_Shape |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_NumberPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_AngularPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Suffix |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Line_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Preview_Type |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 5 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Use |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.X |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Y |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Amplitude.Min |
| { |
| TYPE INTEGER |
| MIN 3 |
| MAX 30 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Gap.Min |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 10 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MaxChannelWidth |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 381000000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.SoftLengthRrules |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MeanderBeforeTune |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE MatchLength.Name |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Planning.Scheduled |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| DECAL ELYTA |
| { |
| Description elektrolyt SMD velikost A |
| Geometry.Height 1.8 mm |
| } |
| DECAL ELYTB |
| { |
| Description elektrolyt SMD velikost B |
| Geometry.Height 2 mm |
| } |
| DECAL ELYTC |
| { |
| Description elektrolyt SMD velikost C |
| Geometry.Height 2.8 mm |
| } |
| DECAL ELYTD |
| { |
| Description elektrolyt SMD velikost D |
| Geometry.Height 3 mm |
| } |
| DECAL CE020X5 |
| { |
| Description Elyt prumer 5mm, roztec 2.032mm - 80 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE025X6 |
| { |
| Description Elyt prumer 6.3mm, roztec 2.54mm - 100 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE035X8 |
| { |
| Description Elyt prumer 8 mm, roztec3.505 mm - 138 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE050X10 |
| { |
| Description Elyt prumer 10mm, roztec 5.08mm - 200 mils |
| Geometry.Height 17 mm |
| } |
| DECAL CE050X13 |
| { |
| Description Elyt prumer 13mm, roztec 5.08mm - 200 mils |
| Geometry.Height 27 mm |
| } |
| DECAL CE075X16 |
| { |
| Description Elyt prumer 16mm, roztec 7.5mm - 300 mils |
| Geometry.Height 26 mm |
| } |
| DECAL CE075X18 |
| { |
| Description Elyt prumer 18mm, roztec 7.5mm - 300 mils |
| Geometry.Height 43 mm |
| } |
| DECAL CE020X5/L |
| { |
| Description Elyt prumer 5mm na lezato, roztec 2.032mm - 80 mils |
| Geometry.Height 5.5 mm |
| } |
| DECAL CE025X6/L |
| { |
| Description Elyt prumer 6.3mm na lezato, roztec 2.54mm - 100 mils |
| Geometry.Height 6.5 mm |
| } |
| DECAL CE035X8/L |
| { |
| Description Elyt prumer 8 mm na lezato, roztec3.505 mm - 138 mils |
| Geometry.Height 8.5 mm |
| } |
| DECAL CE050X10/L |
| { |
| Description Elyt prumer 10mm na lezato, roztec 5.08mm - 200 mils |
| Geometry.Height 10.5 mm |
| } |
| DECAL CANNON25M |
| { |
| Description konektor Cannon 25 pinu, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M/T |
| { |
| Description konektor Cannon 25 pinu na plocho, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F |
| { |
| Description konektor Cannon 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90 |
| { |
| Description konektor Cannon 9 pinu uhlovy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90/L |
| { |
| Description konektor Cannon 9 pinu uhlovy dlouhy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F/T |
| { |
| Description konektor Cannon na plocho 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F |
| { |
| Description konektor Cannon 25 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F/T |
| { |
| Description konektor Cannon 25 pinu na lezato, samice |
| Geometry.Height 13 mm |
| } |
| DECAL SOD87 |
| { |
| Description dioda SMD v pouzdre SOD87 |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO201 |
| { |
| Description usm. dioda nad 1A roztec 13.97mm, 550mils |
| Geometry.Height 10mm |
| } |
| DECAL DO41 |
| { |
| Description usm. dioda do 1A roztec 8.89mm, 350mils |
| Geometry.Height 3.5mm |
| } |
| DECAL MELF |
| { |
| Description dioda SMD v pouzdre MELF |
| Geometry.Height 3 mm |
| } |
| DECAL MINIMELF |
| { |
| Description dioda SMD v pouzdre MINIMELF |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO35 |
| { |
| Description vseob. dioda roztec 6.35mm, 250mils |
| Geometry.Height 3.5mm |
| } |
| DECAL DS040 |
| { |
| Description dioda nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL TO220AC |
| { |
| Description diodove pouzdro TO220AC |
| Geometry.Height 20mm |
| } |
| DECAL TO220AB |
| { |
| Description diodove pouzdro TO220AB |
| Geometry.Height 20mm |
| } |
| DECAL JUMP1 |
| { |
| Description jednorady hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP1_90 |
| { |
| Description jednorady uhlovy hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2 |
| { |
| Description jednorady hrebinek 2 piny |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2_90 |
| { |
| Description jednorady uhlovy hrebinek 2 piny |
| Geometry.Height 3 mm |
| } |
| DECAL ARK050X2 |
| { |
| Description svorkovnice se dvema piny, roztec 5.08 mm - 200 mils |
| Geometry.Height 13 mm |
| } |
| DECAL CROSS |
| { |
| Description usazovaci kriz |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M3 |
| { |
| Description otvor pro sroub M3 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M4 |
| { |
| Description otvor pro sroub M4 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M2 |
| { |
| Description otvor pro sroub M2 |
| Geometry.Height 0 mm |
| } |
| DECAL R0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| } |
| DECAL R0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| } |
| DECAL R1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| } |
| DECAL RS025 |
| { |
| Description bezny rezistor nastojato roztec 2,54 mm, 100 mils |
| Geometry.Height 9 mm |
| } |
| DECAL RL090 |
| { |
| Description bezny rezistor roztec 8.89mm, 350mils |
| Geometry.Height 3mm |
| } |
| DECAL RL140 |
| { |
| Description rezistor 2W nalezato roztec 13.97mm, 550mils |
| Geometry.Height 4.6mm |
| } |
| DECAL RS040 |
| { |
| Description rezistor 2W nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL R1812 |
| { |
| Description rezistor SMD velikost 1812 |
| Geometry.Height 1mm |
| } |
| DECAL DIP16_300 |
| { |
| Description pouzdro DIP16 roztec 7.62 mm - 300 mils |
| Geometry.Height 6 mm |
| } |
| PARTTYPE DB25M |
| { |
| Description ruzne verze DB25 samecek |
| } |
| PARTTYPE DB9F |
| { |
| Description ruzne verze DB9 samice |
| } |
| PARTTYPE DB25F |
| { |
| Description ruzne verze DB25 samice |
| } |
| PARTTYPE D |
| { |
| Value ??? |
| Description ruzne druhy diod |
| } |
| PARTTYPE HOLE |
| { |
| Description otvor pro ruzne prumery sroubu |
| } |
| PARTTYPE R |
| { |
| Value ??? |
| Description rezistory ruznych typu |
| } |
| PARTTYPE DIP16 |
| { |
| Description patice pro DIL16 |
| } |
| PCB DEFAULT |
| { |
| "DFT.Probe to Trace Clearance" 228600dbunit |
| "DFT.Probe to Pad Clearance" 228600dbunit |
| "DFT.Generate Test Points" No |
| "DFT.Allow Stubs" Yes |
| "DFT.Stub Length" 5715000dbunit |
| "DFT.Use Via Grid" Yes |
| "DFT.Grid X-Coordinate" 952500dbunit |
| "DFT.Grid Y-Coordinate" 952500dbunit |
| AutoDimensioning.Marker_Shape YYNNNY |
| AutoDimensioning.Text_NumberPrecision 0 1 2 |
| AutoDimensioning.Text_AngularPrecision 0 0 0 |
| AutoDimensioning.Text_Suffix mil##mm##" |
| AutoDimensioning.Text_Layer 24 |
| AutoDimensioning.Line_Layer 24 |
| AutoDimensioning.Preview_Type 1 |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD No |
| Rules.ViaAtSMD.FitInside Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Length.Unlimited Yes |
| Placement.Grid.Use No |
| Placement.Grid.X 3810000dbunit |
| Placement.Grid.Y 3810000dbunit |
| Accordion.Amplitude.Min 3 |
| Accordion.Gap.Min 1 |
| Routing.MaxChannelWidth 3810000dbunit |
| Routing.SoftLengthRrules Yes |
| Routing.MeanderBeforeTune No |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE02.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/SPINACE03.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze2/zaloha/spinace.opj |
|---|
| 0,0 → 1,149 |
| (ExpressProject "spinace" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\spinace.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "SPINACE.asc") |
| (OTHER_Netlist_File2 "SPINACE.CMP") |
| (OTHER_View_Output "TRUE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "1") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.DRC") |
| (BOM_Scope "0") |
| (BOM_Mode "0") |
| (BOM_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.BOM") |
| (BOM_Merge_Include "FALSE") |
| (BOM_Property_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_Header "Item\tQuantity\tReference\tPart") |
| (BOM_Include_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.INC") |
| (BOM_Include_File_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_One_Part_Per_Line "FALSE") |
| (BOM_View_Output "TRUE")) |
| (Folder "Outputs" |
| (File ".\spinace.asc" |
| (Type "Report")) |
| (File ".\spinace.drc" |
| (Type "Report")) |
| (File ".\spinace.bom" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x") |
| (PartMRUSelector |
| (No_PCB_Device |
| (FullPartName "No_PCB_Device.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (HOLE_M3 |
| (FullPartName "HOLE_M3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB15F |
| (FullPartName "DB15F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\verze2\spinace.dsn") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\verze2\spinace.dsn" |
| "SCHEMATIC1") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\MOTOR\verze2\spinace.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 297")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -1 -1 88 730 88 412") |
| (Scroll "566 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/Motory/AC_3F/verze2/zaloha/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze3/SPINACE.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/verze3/readme.txt |
|---|
| 0,0 → 1,0 |
| vsechny soucastky jsou ze strany soucastek |
| /schemata/Motory/AC_3F/verze3/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.EDN |
|---|
| 0,0 → 1,237 |
| (edif (rename LED_board "LED board") |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2002 06 02 13 31 40) |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 23, 2002") |
| (comment "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell R |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT))))) |
| (cell JUMPER5 |
| (cellType generic) |
| (comment "From OrCAD library CONNECTOR.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT))))) |
| (cell LED |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell (rename LED_board "LED board") |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance R1 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R2 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R3 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R4 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R5 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R6 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R7 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R8 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMPER5 |
| (libraryRef OrCAD_LIB)))) |
| (instance D1 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D2 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D3 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D4 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D5 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D6 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D7 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D8 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D9 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (net N05262 |
| (joined |
| (portRef &2 (instanceRef D7)))) |
| (net N05090 |
| (joined |
| (portRef &2 (instanceRef D5)))) |
| (net N05060 |
| (joined |
| (portRef &2 (instanceRef D3)))) |
| (net N05075 |
| (joined |
| (portRef &2 (instanceRef D4)))) |
| (net N05105 |
| (joined |
| (portRef &2 (instanceRef D6)))) |
| (net N05045 |
| (joined |
| (portRef &2 (instanceRef D2)))) |
| (net N05895 |
| (joined |
| (portRef &2 (instanceRef D8)))) |
| (net N06519 |
| (joined |
| (portRef &2 (instanceRef D1)))) |
| (net N06561 |
| (joined |
| (portRef &1 (instanceRef D9)) |
| (portRef &9 (instanceRef J3)))) |
| (net N05788 |
| (joined |
| (portRef &2 (instanceRef D9)) |
| (portRef &10 (instanceRef J3)))) |
| (net N02327 |
| (joined |
| (portRef &2 (instanceRef R5)) |
| (portRef &5 (instanceRef J3)))) |
| (net N000910 |
| (joined |
| (portRef &1 (instanceRef R5)) |
| (portRef &1 (instanceRef D5)))) |
| (net N02513 |
| (joined |
| (portRef &2 (instanceRef R6)) |
| (portRef &6 (instanceRef J3)))) |
| (net N001130 |
| (joined |
| (portRef &1 (instanceRef D6)) |
| (portRef &1 (instanceRef R6)))) |
| (net N02272 |
| (joined |
| (portRef &2 (instanceRef R7)) |
| (portRef &7 (instanceRef J3)))) |
| (net N001350 |
| (joined |
| (portRef &1 (instanceRef D7)) |
| (portRef &1 (instanceRef R7)))) |
| (net N02086 |
| (joined |
| (portRef &8 (instanceRef J3)) |
| (portRef &2 (instanceRef R8)))) |
| (net N001570 |
| (joined |
| (portRef &1 (instanceRef D8)) |
| (portRef &1 (instanceRef R8)))) |
| (net N07364 |
| (joined |
| (portRef &2 (instanceRef R1)) |
| (portRef &1 (instanceRef J3)))) |
| (net N000030 |
| (joined |
| (portRef &1 (instanceRef D1)) |
| (portRef &1 (instanceRef R1)))) |
| (net N04007 |
| (joined |
| (portRef &2 (instanceRef J3)) |
| (portRef &2 (instanceRef R2)))) |
| (net N000250 |
| (joined |
| (portRef &1 (instanceRef D2)) |
| (portRef &1 (instanceRef R2)))) |
| (net N02382 |
| (joined |
| (portRef &3 (instanceRef J3)) |
| (portRef &2 (instanceRef R3)))) |
| (net N000470 |
| (joined |
| (portRef &1 (instanceRef R3)) |
| (portRef &1 (instanceRef D3)))) |
| (net N03322 |
| (joined |
| (portRef &2 (instanceRef R4)) |
| (portRef &4 (instanceRef J3)))) |
| (net N000690 |
| (joined |
| (portRef &1 (instanceRef R4)) |
| (portRef &1 (instanceRef D4)))))))) |
| (design (rename LED_board "LED board") |
| (cellRef LED_board |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.ERR |
|---|
| 0,0 → 1,4 |
| AutoECO Error Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| No errors found |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.EXP |
|---|
| 0,0 → 1,0 |
| "DESIGN" "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" "LOGICAL" |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.LIS |
|---|
| 0,0 → 1,57 |
| AutoECO Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| If "*EOF*" immediately follows, no changes were made |
| Adding footprint R |
| Adding package R |
| Adding package LED |
| Adding package JUMPER5 |
| Adding component R6 |
| Adding component D1 |
| Found library footprint with same name as part LED |
| Adding component D2 |
| Adding component R7 |
| Adding component D3 |
| Adding component D4 |
| Adding component R1 |
| Adding component R8 |
| Adding component D5 |
| Adding component R2 |
| Adding component D6 |
| Adding component D7 |
| Adding component D9 |
| Adding component R3 |
| Adding component D8 |
| Adding component R4 |
| Adding component R5 |
| Adding component J3 |
| Found footprint BLKCON.100/VH/TM2OE/W.200/10 from PRT file for part JUMPER5, comp J3 |
| Adding net N000250 |
| Adding net N000470 |
| Adding net N000690 |
| Adding net N000910 |
| Adding net N001130 |
| Adding net N001350 |
| Adding net N001570 |
| Adding net N05262 |
| Adding net N05090 |
| Adding net N05060 |
| Adding net N05075 |
| Adding net N05105 |
| Adding net N05045 |
| Adding net N05895 |
| Adding net N06519 |
| Adding net N000030 |
| Adding net N02513 |
| Adding net N02382 |
| Adding net N02272 |
| Adding net N02327 |
| Adding net N06561 |
| Adding net N05788 |
| Adding net N03322 |
| Adding net N02086 |
| Adding net N07364 |
| Adding net N04007 |
| Deleting net DEFAULT |
| *EOF* |
| No errors found |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.MAX |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.MNL |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.NET |
|---|
| 0,0 → 1,125 |
| (netlist "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" |
| (compinst "D1" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D2" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D3" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D4" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D5" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D6" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D7" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D8" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D9" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "J3" |
| (patternName "JUMPER5") |
| (compvalue "JUMPER5")) |
| (compinst "R1" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R2" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R3" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R4" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R5" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R6" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R7" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R8" |
| (patternName "R") |
| (compvalue "220")) |
| (net "N000250" |
| (node "D2" "1") |
| (node "R2" "1")) |
| (net "N000470" |
| (node "R3" "1") |
| (node "D3" "1")) |
| (net "N000690" |
| (node "R4" "1") |
| (node "D4" "1")) |
| (net "N000910" |
| (node "R5" "1") |
| (node "D5" "1")) |
| (net "N001130" |
| (node "D6" "1") |
| (node "R6" "1")) |
| (net "N001350" |
| (node "D7" "1") |
| (node "R7" "1")) |
| (net "N001570" |
| (node "D8" "1") |
| (node "R8" "1")) |
| (net "N05262" |
| (node "D7" "2")) |
| (net "N05090" |
| (node "D5" "2")) |
| (net "N05060" |
| (node "D3" "2")) |
| (net "N05075" |
| (node "D4" "2")) |
| (net "N05105" |
| (node "D6" "2")) |
| (net "N05045" |
| (node "D2" "2")) |
| (net "N05895" |
| (node "D8" "2")) |
| (net "N06519" |
| (node "D1" "2")) |
| (net "N000030" |
| (node "D1" "1") |
| (node "R1" "1")) |
| (net "N02513" |
| (node "R6" "2") |
| (node "J3" "6")) |
| (net "N02382" |
| (node "J3" "3") |
| (node "R3" "2")) |
| (net "N02272" |
| (node "R7" "2") |
| (node "J3" "7")) |
| (net "N02327" |
| (node "R5" "2") |
| (node "J3" "5")) |
| (net "N06561" |
| (node "D9" "1") |
| (node "J3" "9")) |
| (net "N05788" |
| (node "D9" "2") |
| (node "J3" "10")) |
| (net "N03322" |
| (node "R4" "2") |
| (node "J3" "4")) |
| (net "N02086" |
| (node "J3" "8") |
| (node "R8" "2")) |
| (net "N07364" |
| (node "R1" "2") |
| (node "J3" "1")) |
| (net "N04007" |
| (node "J3" "2") |
| (node "R2" "2"))) |
| /schemata/Motory/AC_3F/zaloha/MOTOR BOARD.ONL |
|---|
| 0,0 → 1,265 |
| (PCB "MOTOR BOARD" |
| (description |
| (timeStamp "2002 06 02 07 16 34") |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Saturday, March 23, 2002") |
| (document "D:\\@KAKLIK\\MOTOR\\MOTOR BOARD.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMPER5 |
| (place J3 |
| (property |
| (timestamp 00000683) |
| ("Source Package" JUMPER5) |
| (Value JUMPER5)))) |
| (component LED |
| (place D1 |
| (property |
| (timestamp 00000003) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D2 |
| (property |
| (timestamp 00000019) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D3 |
| (property |
| (timestamp 0000002F) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D4 |
| (property |
| (timestamp 00000045) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D5 |
| (property |
| (timestamp 0000005B) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D6 |
| (property |
| (timestamp 00000071) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D7 |
| (property |
| (timestamp 00000087) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D8 |
| (property |
| (timestamp 0000009D) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D9 |
| (property |
| (timestamp 00001905) |
| ("Source Package" LED) |
| (Value LED)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000227) |
| ("Source Package" R) |
| (Value 220))) |
| (place R2 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000024A) |
| ("Source Package" R) |
| (Value 220))) |
| (place R3 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000026D) |
| ("Source Package" R) |
| (Value 220))) |
| (place R4 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000290) |
| ("Source Package" R) |
| (Value 220))) |
| (place R5 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002B3) |
| ("Source Package" R) |
| (Value 220))) |
| (place R6 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002D6) |
| ("Source Package" R) |
| (Value 220))) |
| (place R7 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002F9) |
| ("Source Package" R) |
| (Value 220))) |
| (place R8 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000031C) |
| ("Source Package" R) |
| (Value 220))))) |
| (library |
| (image R |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMPER5 |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\CONNECTOR.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4)))) |
| (image LED |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname ANODE) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname CATHODE) |
| (pintype 4))))) |
| (network |
| (net N000250 |
| (pins |
| D2-1 R2-1)) |
| (net N000470 |
| (pins |
| R3-1 D3-1)) |
| (net N000690 |
| (pins |
| R4-1 D4-1)) |
| (net N000910 |
| (pins |
| R5-1 D5-1)) |
| (net N001130 |
| (pins |
| D6-1 R6-1)) |
| (net N001350 |
| (pins |
| D7-1 R7-1)) |
| (net N001570 |
| (pins |
| D8-1 R8-1)) |
| (net N05262 |
| (pins |
| D7-2)) |
| (net N05090 |
| (pins |
| D5-2)) |
| (net N05060 |
| (pins |
| D3-2)) |
| (net N05075 |
| (pins |
| D4-2)) |
| (net N05105 |
| (pins |
| D6-2)) |
| (net N05045 |
| (pins |
| D2-2)) |
| (net N05895 |
| (pins |
| D8-2)) |
| (net N06519 |
| (pins |
| D1-2)) |
| (net N000030 |
| (pins |
| D1-1 R1-1)) |
| (net N02513 |
| (pins |
| R6-2 J3-6)) |
| (net N02382 |
| (pins |
| J3-3 R3-2)) |
| (net N02272 |
| (pins |
| R7-2 J3-7)) |
| (net N02327 |
| (pins |
| R5-2 J3-5)) |
| (net N06561 |
| (pins |
| D9-1 J3-9)) |
| (net N05788 |
| (pins |
| D9-2 J3-10)) |
| (net N03322 |
| (pins |
| R4-2 J3-4)) |
| (net N02086 |
| (pins |
| J3-8 R8-2)) |
| (net N07364 |
| (pins |
| R1-2 J3-1)) |
| (net N04007 |
| (pins |
| J3-2 R2-2))) |
| ) |
| /schemata/Motory/AC_3F/zaloha/TEST.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/TEST.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/TRANZISTORY.LLB |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/ULN2003.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/ULN2003.DRC |
|---|
| 0,0 → 1,104 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking Off-Page Connections |
| Checking Pin to Port Connections |
| Checking for Invalid References |
| Checking for Duplicate References |
| Checking for Compatibility with SDT |
| Reporting Off-Grid Objects |
| Reporting Net Names |
| N36937 |
| N37144 |
| N37348 |
| N37007 |
| N37211 |
| N36870 |
| N37074 |
| N37418 |
| N37281 |
| N36800 |
| N40223 |
| N40337 |
| N40406 |
| N42209 |
| N42326 |
| N41046 |
| N42437 |
| N42556 |
| N42675 |
| N42794 |
| N43077 |
| N43185 |
| N43293 |
| N43401 |
| N25451 |
| N19393 |
| N13996 |
| N13617 |
| N14493 |
| N13703 |
| N19493 |
| N15219 |
| N13531 |
| N14688 |
| N13359 |
| N14585 |
| N25474 |
| N14796 |
| N15322 |
| N19443 |
| N25409 |
| N15006 |
| N14903 |
| N13445 |
| N18998 |
| N19048 |
| N19217 |
| N40597 |
| N19163 |
| N51332 |
| N37732 |
| N37627 |
| N51243 |
| N37522 |
| N51109 |
| N55592 |
| N54463 |
| N50188 |
| N50158 |
| N38097 |
| N53250 |
| N53070 |
| N38198 |
| N50008 |
| N50032 |
| +5V |
| VCC |
| Alternate Name: Vcc |
| GND |
| N61737 |
| N60796 |
| N61407 |
| N61514 |
| N61077 |
| N60981 |
| N61630 |
| N60885 |
| N61173 |
| N60391 |
| N59355 |
| N59497 |
| /schemata/Motory/AC_3F/zaloha/ULN2003.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/AC_3F/zaloha/ULN2003.EDN |
|---|
| 0,0 → 1,520 |
| (edif SCHEMATIC1 |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2003 03 27 12 18 04) |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 22, 2003") |
| (comment "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell DB9F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT))))) |
| (cell DB25M |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DB25F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DIP16_300 |
| (cellType generic) |
| (comment "From OrCAD library DECALES.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell ULN2003 |
| (cellType generic) |
| (comment "From OrCAD library RUZNE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell JUMP3 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT))))) |
| (cell JUMP5 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT))))) |
| (cell JUMP4 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT))))) |
| (cell JUMP8 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT))))) |
| (cell PHONEJACKSTEREO |
| (cellType generic) |
| (comment "From OrCAD library _SENO_.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &3 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &1 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell SCHEMATIC1 |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance CON2 |
| (viewRef NetlistView |
| (cellRef DB9F |
| (libraryRef OrCAD_LIB)))) |
| (instance CON4 |
| (viewRef NetlistView |
| (cellRef DB25M |
| (libraryRef OrCAD_LIB)))) |
| (instance CON5 |
| (viewRef NetlistView |
| (cellRef DB25F |
| (libraryRef OrCAD_LIB)))) |
| (instance U1 |
| (viewRef NetlistView |
| (cellRef DIP16_300 |
| (libraryRef OrCAD_LIB)))) |
| (instance U2 |
| (viewRef NetlistView |
| (cellRef ULN2003 |
| (libraryRef OrCAD_LIB)))) |
| (instance J11 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J12 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J13 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J14 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J1 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J2 |
| (viewRef NetlistView |
| (cellRef JUMP4 |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMP8 |
| (libraryRef OrCAD_LIB)))) |
| (instance J4 |
| (viewRef NetlistView |
| (cellRef PHONEJACKSTEREO |
| (libraryRef OrCAD_LIB)))) |
| (instance J5 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J6 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J7 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J8 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (net N19443 |
| (joined |
| (portRef &4 (instanceRef CON2)) |
| (portRef &6 (instanceRef U1)) |
| (portRef &2 (instanceRef J6)))) |
| (net N13996 |
| (joined |
| (portRef &2 (instanceRef J2)) |
| (portRef &14 (instanceRef CON4)) |
| (portRef &3 (instanceRef U1)))) |
| (net N19393 |
| (joined |
| (portRef &3 (instanceRef CON2)) |
| (portRef &5 (instanceRef U1)) |
| (portRef &1 (instanceRef J6)))) |
| (net N19493 |
| (joined |
| (portRef &7 (instanceRef CON2)) |
| (portRef &7 (instanceRef U1)) |
| (portRef &3 (instanceRef J6)))) |
| (net N25451 |
| (joined |
| (portRef &4 (instanceRef U1)) |
| (portRef &3 (instanceRef J2)) |
| (portRef &16 (instanceRef CON4)))) |
| (net N25409 |
| (joined |
| (portRef &1 (instanceRef J2)) |
| (portRef &1 (instanceRef CON4)) |
| (portRef &2 (instanceRef U1)))) |
| (net N15322 |
| (joined |
| (portRef &2 (instanceRef CON4)) |
| (portRef &8 (instanceRef J3)) |
| (portRef &1 (instanceRef U1)))) |
| (net N13359 |
| (joined |
| (portRef &10 (instanceRef CON4)) |
| (portRef &5 (instanceRef J1)) |
| (portRef &10 (instanceRef CON5)))) |
| (net N13445 |
| (joined |
| (portRef &11 (instanceRef CON4)) |
| (portRef &4 (instanceRef J1)) |
| (portRef &11 (instanceRef CON5)))) |
| (net N13531 |
| (joined |
| (portRef &12 (instanceRef CON4)) |
| (portRef &3 (instanceRef J1)) |
| (portRef &12 (instanceRef CON5)))) |
| (net N13617 |
| (joined |
| (portRef &13 (instanceRef CON4)) |
| (portRef &2 (instanceRef J1)) |
| (portRef &13 (instanceRef CON5)))) |
| (net N36937 |
| (joined |
| (portRef &20 (instanceRef CON4)) |
| (portRef &1 (instanceRef J13)))) |
| (net N37144 |
| (joined |
| (portRef &21 (instanceRef CON5)) |
| (portRef &2 (instanceRef J12)))) |
| (net N37348 |
| (joined |
| (portRef &23 (instanceRef CON4)) |
| (portRef &1 (instanceRef J8)))) |
| (net N37007 |
| (joined |
| (portRef &20 (instanceRef CON5)) |
| (portRef &2 (instanceRef J13)))) |
| (net N37211 |
| (joined |
| (portRef &22 (instanceRef CON4)) |
| (portRef &1 (instanceRef J11)))) |
| (net N36870 |
| (joined |
| (portRef &19 (instanceRef CON5)) |
| (portRef &2 (instanceRef J14)))) |
| (net N37074 |
| (joined |
| (portRef &21 (instanceRef CON4)) |
| (portRef &1 (instanceRef J12)))) |
| (net N37418 |
| (joined |
| (portRef &23 (instanceRef CON5)) |
| (portRef &2 (instanceRef J8)))) |
| (net N37281 |
| (joined |
| (portRef &22 (instanceRef CON5)) |
| (portRef &2 (instanceRef J11)))) |
| (net N36800 |
| (joined |
| (portRef &19 (instanceRef CON4)) |
| (portRef &1 (instanceRef J14)))) |
| (net N28601 |
| (joined |
| (portRef &24 (instanceRef CON4)) |
| (portRef &2 (instanceRef J7)))) |
| (net N13703 |
| (joined |
| (portRef &15 (instanceRef CON4)) |
| (portRef &1 (instanceRef J1)) |
| (portRef &15 (instanceRef CON5)))) |
| (net N25474 |
| (joined |
| (portRef &17 (instanceRef CON4)) |
| (portRef &4 (instanceRef J2)) |
| (portRef &17 (instanceRef CON5)))) |
| (net N40223 |
| (joined |
| (portRef &10 (instanceRef U1)) |
| (portRef &3 (instanceRef J14)))) |
| (net N40337 |
| (joined |
| (portRef &11 (instanceRef U1)) |
| (portRef &3 (instanceRef J13)))) |
| (net N40406 |
| (joined |
| (portRef &12 (instanceRef U1)) |
| (portRef &3 (instanceRef J12)))) |
| (net N19163 |
| (joined |
| (portRef &6 (instanceRef CON2)) |
| (portRef &3 (instanceRef J5)))) |
| (net N19217 |
| (joined |
| (portRef &4 (instanceRef J5)) |
| (portRef &8 (instanceRef CON2)))) |
| (net N19271 |
| (joined |
| (portRef &9 (instanceRef CON2)) |
| (portRef &5 (instanceRef J5)))) |
| (net N19048 |
| (joined |
| (portRef &2 (instanceRef CON2)) |
| (portRef &3 (instanceRef J11)) |
| (portRef &2 (instanceRef J5)))) |
| (net N18998 |
| (joined |
| (portRef &1 (instanceRef J5)) |
| (portRef &1 (instanceRef CON2)) |
| (portRef &3 (instanceRef J8)))) |
| (net N14796 |
| (joined |
| (portRef &4 (instanceRef J3)) |
| (portRef &4 (instanceRef U2)) |
| (portRef &6 (instanceRef CON4)))) |
| (net N15006 |
| (joined |
| (portRef &4 (instanceRef CON4)) |
| (portRef &6 (instanceRef U2)) |
| (portRef &6 (instanceRef J3)))) |
| (net N14903 |
| (joined |
| (portRef &5 (instanceRef CON4)) |
| (portRef &5 (instanceRef U2)) |
| (portRef &5 (instanceRef J3)))) |
| (net N14585 |
| (joined |
| (portRef &8 (instanceRef CON4)) |
| (portRef &2 (instanceRef U2)) |
| (portRef &2 (instanceRef J3)))) |
| (net N14688 |
| (joined |
| (portRef &7 (instanceRef CON4)) |
| (portRef &3 (instanceRef J3)) |
| (portRef &3 (instanceRef U2)))) |
| (net N14493 |
| (joined |
| (portRef &1 (instanceRef J3)) |
| (portRef &9 (instanceRef CON4)) |
| (portRef &1 (instanceRef U2)))) |
| (net N15219 |
| (joined |
| (portRef &3 (instanceRef CON4)) |
| (portRef &7 (instanceRef U2)) |
| (portRef &7 (instanceRef J3)))) |
| (net N42209 |
| (joined |
| (portRef &15 (instanceRef U2)) |
| (portRef &8 (instanceRef CON5)))) |
| (net (rename PLUSV "+V") |
| (joined |
| (portRef &9 (instanceRef U1)) |
| (portRef &3 (instanceRef J4)) |
| (portRef &2 (instanceRef J4)) |
| (portRef &1 (instanceRef J7)) |
| (portRef &24 (instanceRef CON5)) |
| (portRef &9 (instanceRef U2)))) |
| (net N42326 |
| (joined |
| (portRef &14 (instanceRef U2)) |
| (portRef &7 (instanceRef CON5)))) |
| (net N41046 |
| (joined |
| (portRef &16 (instanceRef U2)) |
| (portRef &9 (instanceRef CON5)))) |
| (net N42437 |
| (joined |
| (portRef &13 (instanceRef U2)) |
| (portRef &6 (instanceRef CON5)))) |
| (net N42556 |
| (joined |
| (portRef &12 (instanceRef U2)) |
| (portRef &5 (instanceRef CON5)))) |
| (net N42675 |
| (joined |
| (portRef &11 (instanceRef U2)) |
| (portRef &4 (instanceRef CON5)))) |
| (net N42794 |
| (joined |
| (portRef &10 (instanceRef U2)) |
| (portRef &3 (instanceRef CON5)))) |
| (net GND |
| (joined |
| (portRef &5 (instanceRef CON2)) |
| (portRef &25 (instanceRef CON4)) |
| (portRef &8 (instanceRef U2)) |
| (portRef &8 (instanceRef U1)) |
| (portRef &18 (instanceRef CON4)) |
| (portRef &1 (instanceRef J4)) |
| (portRef &3 (instanceRef J7)) |
| (portRef &25 (instanceRef CON5)) |
| (portRef &18 (instanceRef CON5)))) |
| (net N43077 |
| (joined |
| (portRef &16 (instanceRef U1)) |
| (portRef &2 (instanceRef CON5)))) |
| (net N43185 |
| (joined |
| (portRef &15 (instanceRef U1)) |
| (portRef &1 (instanceRef CON5)))) |
| (net N43293 |
| (joined |
| (portRef &14 (instanceRef U1)) |
| (portRef &14 (instanceRef CON5)))) |
| (net N43401 |
| (joined |
| (portRef &13 (instanceRef U1)) |
| (portRef &16 (instanceRef CON5)))))))) |
| (design SCHEMATIC1 |
| (cellRef SCHEMATIC1 |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/AC_3F/zaloha/ULN2003.ONL |
|---|
| 0,0 → 1,243 |
| (PCB ULN2003 |
| (description |
| (timeStamp "2003 03 05 21 31 15") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Wednesday, March 05, 2003") |
| (document "D:\\@KAKLIK\\SCHEMATA\\MOTOR\\ULN2003.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP1 |
| (place J6 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010ED3) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J7 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010EEB) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component PRIM20 |
| (place CON6 |
| (property |
| ("PCB Footprint" PRIM20) |
| (Device PRIM20) |
| (timestamp 00010F4B) |
| ("Source Package" PRIM20) |
| (Value PRIM20)))) |
| (component DB15M |
| (place CON3 |
| (property |
| ("PCB Footprint" CANNON15M_90) |
| (Device DB15M) |
| (timestamp 00010F17) |
| ("Source Package" DB15M) |
| (Value DB15M))))) |
| (library |
| (image DB15M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB15M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4)))) |
| (image PRIM20 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4)))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))))) |
| (network |
| (net N59497 |
| (pins |
| CON3-4 CON3-5 J7-1)) |
| (net N61407 |
| (pins |
| CON3-11 CON6-13)) |
| (net N61737 |
| (pins |
| CON3-14 CON6-19)) |
| (net N61173 |
| (pins |
| CON3-10 CON6-11)) |
| (net N61630 |
| (pins |
| CON3-13 CON6-17)) |
| (net N61077 |
| (pins |
| CON3-15 CON6-9)) |
| (net N60981 |
| (pins |
| CON3-7 CON6-7)) |
| (net N61514 |
| (pins |
| CON3-12 CON6-15)) |
| (net N59355 |
| (pins |
| CON3-1 J6-1 CON3-8 CON3-9)) |
| (net N60885 |
| (pins |
| CON3-6 CON6-5)) |
| (net N60796 |
| (pins |
| CON3-3 CON6-3)) |
| (net N60391 |
| (pins |
| CON3-2 CON6-1))) |
| ) |
| /schemata/Motory/AC_3F/zaloha/ULN2003.asc |
|---|
| 0,0 → 1,33 |
| *PADS-PCB* |
| *PART* |
| CON3 DB15M@CANNON15M_90 |
| CON6 PRIM20@PRIM20 |
| J6 JUMP1@JUMP1 |
| J7 JUMP1@JUMP1 |
| *NET* |
| *SIGNAL* N59497 |
| CON3.4 CON3.5 J7.1 |
| *SIGNAL* N61407 |
| CON3.11 CON6.13 |
| *SIGNAL* N61737 |
| CON3.14 CON6.19 |
| *SIGNAL* N61173 |
| CON3.10 CON6.11 |
| *SIGNAL* N61630 |
| CON3.13 CON6.17 |
| *SIGNAL* N61077 |
| CON3.15 CON6.9 |
| *SIGNAL* N60981 |
| CON3.7 CON6.7 |
| *SIGNAL* N61514 |
| CON3.12 CON6.15 |
| *SIGNAL* N59355 |
| CON3.1 J6.1 CON3.8 CON3.9 |
| *SIGNAL* N60885 |
| CON3.6 CON6.5 |
| *SIGNAL* N60796 |
| CON3.3 CON6.3 |
| *SIGNAL* N60391 |
| CON3.2 CON6.1 |
| *END* |
| /schemata/Motory/AC_3F/zaloha/ULN2003.net |
|---|
| 0,0 → 1,102 |
| *PADS-PCB* |
| *PART* |
| CON1 DB25F,DB25F@CANNON25F_90 |
| CON2 DB9F,DB9F@CANNON9F_90 |
| J1 JUMP5,vstup@JUMP5 |
| J10 JUMP2X7,JUMP2X7@JUMP2X7 |
| J2 JUMP4,vstupvystup@JUMP4 |
| J3 JUMP8,vystup@JUMP8 |
| J4 ,PHONEJACKSTEREO@JACK35 |
| J5 JUMP5,vstup_com@JUMP5 |
| J6 JUMP3,vystup_com@JUMP3 |
| J9 JUMP2X7,JUMP2X7@JUMP2X7 |
| U1 DIP16,ULN2003@DIP16_300 |
| U2 DIP16,ULN2003@DIP16_300 |
| *NET* |
| *SIGNAL* N18998 |
| J5.1 CON2.1 |
| *SIGNAL* N19048 |
| J5.2 CON2.2 |
| *SIGNAL* N19163 |
| J5.3 CON2.6 |
| *SIGNAL* N19271 |
| J5.5 CON2.9 |
| *SIGNAL* N19217 |
| J5.4 CON2.8 |
| *SIGNAL* N19393 |
| CON2.3 U1.5 J6.1 |
| *SIGNAL* N19443 |
| CON2.4 U1.6 J6.2 |
| *SIGNAL* N19493 |
| CON2.7 U1.7 J6.3 |
| *SIGNAL* N21675 |
| J9.9 U2.12 |
| *SIGNAL* N21413 |
| J9.3 U2.15 |
| *SIGNAL* N21587 |
| J9.7 U2.13 |
| *SIGNAL* N13359 |
| J1.5 CON1.10 |
| *SIGNAL* N21499 |
| J9.5 U2.14 |
| *SIGNAL* N13445 |
| J1.4 CON1.11 |
| *SIGNAL* N21331 |
| J9.1 U2.16 |
| *SIGNAL* N13531 |
| J1.3 CON1.12 |
| *SIGNAL* N13617 |
| J1.2 CON1.13 |
| *SIGNAL* N13703 |
| CON1.15 J1.1 |
| *SIGNAL* N14585 |
| CON1.8 U2.2 J3.2 |
| *SIGNAL* N14796 |
| CON1.6 U2.4 J3.4 |
| *SIGNAL* N14493 |
| CON1.9 U2.1 J3.1 |
| *SIGNAL* N14903 |
| CON1.5 U2.5 J3.5 |
| *SIGNAL* N15006 |
| CON1.4 U2.6 J3.6 |
| *SIGNAL* N15322 |
| CON1.2 U1.1 J3.8 |
| *SIGNAL* GND |
| CON1.21 CON1.22 CON1.25 CON1.18 CON1.23 CON1.19 CON1.20 U1.8 |
| CON1.24 U2.8 CON2.5 J4.1 |
| *SIGNAL* N15219 |
| CON1.3 U2.7 J3.7 |
| *SIGNAL* N22653 |
| J10.5 U1.14 |
| *SIGNAL* N22313 |
| J9.11 U2.11 |
| *SIGNAL* N22399 |
| J9.13 U2.10 |
| *SIGNAL* N22485 |
| J10.1 U1.16 |
| *SIGNAL* N22999 |
| J10.13 U1.10 |
| *SIGNAL* N22913 |
| J10.11 U1.11 |
| *SIGNAL* N22827 |
| J10.9 U1.12 |
| *SIGNAL* N22567 |
| J10.3 U1.15 |
| *SIGNAL* N22739 |
| J10.7 U1.13 |
| *SIGNAL* N25409 |
| CON1.1 U1.2 J2.1 |
| *SIGNAL* N13996 |
| J2.2 CON1.14 U1.3 |
| *SIGNAL* N25451 |
| CON1.16 U1.4 J2.3 |
| *SIGNAL* N25474 |
| CON1.17 J2.4 |
| *SIGNAL* N14688 |
| CON1.7 U2.3 J3.3 |
| *SIGNAL* +V |
| U1.9 U2.9 J9.2 J9.4 J9.6 J9.8 J9.10 J9.12 |
| J9.14 J10.2 J10.4 J10.6 J10.8 J10.10 J10.12 J10.14 |
| J4.3 J4.2 |
| *END* |
| /schemata/Motory/AC_3F/zaloha/ULN2003.opj |
|---|
| 0,0 → 1,160 |
| (ExpressProject "ULN2003" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\uln2003.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "ULN2003.asc") |
| (OTHER_Netlist_File2 "ULN2003.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EDIF_Netlist_File "ULN2003.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "TRUE") |
| (DRC_Check_Off-Page_Connectors "TRUE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "TRUE") |
| (DRC_Report_Off-grid_Objects "TRUE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "TRUE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DRC") |
| (RootChangedForceReNetlist "x")) |
| (Folder "Outputs" |
| (File ".\uln2003.net" |
| (Type "Report")) |
| (File ".\uln2003.asc" |
| (Type "Report")) |
| (File ".\uln2003.edn" |
| (Type "Report")) |
| (File ".\uln2003.drc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PADRC_5x6 |
| (FullPartName "PADRC_5x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (JUMP5 |
| (FullPartName "JUMP5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PRIM20 |
| (FullPartName "PRIM20.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (PADRC_2x6 |
| (FullPartName "PADRC_2x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (PRIM10 |
| (FullPartName "PRIM10.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB15M |
| (FullPartName "DB15M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (RS232JUMP2X5 |
| (FullPartName "RS232JUMP2X5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (PHONEJACKSTEREO |
| (FullPartName "PHONEJACKSTEREO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\_SENO_.OLB") |
| (DeviceIndex "0")) |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP2X7 |
| (FullPartName "JUMP2X7.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP4 |
| (FullPartName "JUMP4.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DIP16_300 |
| (FullPartName "DIP16_300.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\DECALES.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x")) |
| /schemata/Motory/AC_3F/zaloha/layout.log |
|---|
| 0,0 → 1,1498 |
| Wed Mar 20 22:49:21 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:50:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:51:31 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:46 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:47 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:19 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:43 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:44 Windows which were open at time of error: |
| Wed Mar 20 22:53:44 End-of-list |
| Wed Mar 20 22:53:54 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:55 Windows which were open at time of error: |
| Wed Mar 20 22:53:55 ActiveWindow: &Components |
| Wed Mar 20 22:53:55 Icon: &Nets |
| Wed Mar 20 22:53:55 Icon: Post Proces&s |
| Wed Mar 20 22:53:55 Icon: &Route |
| Wed Mar 20 22:53:55 End-of-list |
| Wed Mar 20 22:54:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:27 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:54:27 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:21 Windows which were open at time of error: |
| Wed Mar 20 22:56:21 End-of-list |
| Wed Mar 20 22:57:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:30 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:57:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:10 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:01:10 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:05:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:12:26 No new connections routed. |
| Wed Mar 20 23:12:26 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:12:27 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:13:48 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:29 No new connections routed. |
| Wed Mar 20 23:15:29 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:15:30 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:18:33 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:22:11 No new connections routed. |
| Wed Mar 20 23:22:11 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:43 No new connections routed. |
| Wed Mar 20 23:24:43 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:44 Routed 18 connections in 0 seconds. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:44:52 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:48:34 Routed 2 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 2 out of 29 (6%). |
| Wed Mar 20 23:48:34 Routed 27 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:50:26 Saved as file ~undo.max |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 UserDiv from Layout.INI for AutoECO: 60 |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:07:07 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:15:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:56 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:08 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:16:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:48 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:55 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:19:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:06 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:16:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:10 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:20:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:05 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:35:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:36:27 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:36:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:28 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:30 Windows which were open at time of error: |
| Sat Mar 23 06:26:30 ActiveWindow: &Components |
| Sat Mar 23 06:26:30 Icon: &Nets |
| Sat Mar 23 06:26:30 Icon: Post Proces&s |
| Sat Mar 23 06:26:30 Icon: &Route |
| Sat Mar 23 06:26:30 End-of-list |
| Sat Mar 23 06:34:32 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:52 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:42:32 No new connections routed. |
| Sat Mar 23 06:42:32 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:42:34 Routed 28 connections in 2 seconds. |
| Sat Mar 23 06:42:34 Total is now 28 out of 29 (96%). |
| Sat Mar 23 06:42:36 Routed 1 connections in 1 seconds. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:43:55 No new connections routed. |
| Sat Mar 23 06:43:55 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:44:00 Routed 28 connections in 5 seconds. |
| Sat Mar 23 06:44:00 Total is now 27 out of 29 (93%). |
| Sat Mar 23 06:44:02 Routed 2 connections in 1 seconds. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:45:00 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:54:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| /schemata/Motory/AC_3F/zaloha/motor board.opj |
|---|
| 0,0 → 1,159 |
| (ExpressProject "motor board" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\motor board.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "0") |
| (EDIF_Netlist_File "MOTOR BOARD.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\NOVÁ SLOKA\MOTOR BOARD.DRC") |
| (LAYOUT_Netlist_File "MOTOR BOARD.MNL") |
| (LAYOUT_PCB_Footprint "{PCB Footprint}") |
| (FALSE) |
| (LAYOUT_Units "1") |
| (TRUE) |
| (FALSE) |
| (RootChangedForceReNetlist "x") |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "MOTOR BOARD.NET") |
| (OTHER_Netlist_File2 "MOTOR BOARD.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "accel.dll") |
| (OTHER_PCB_Footprint "{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EXPORT_Scope "0") |
| (EXPORT_Contents "-1") |
| (EXPORT_File_Name "D:\@KAKLIK\MOTOR\MOTOR BOARD.EXP")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library") |
| (PartMRUSelector |
| (JUMPER16 |
| (FullPartName "JUMPER16.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER5 |
| (FullPartName "JUMPER5.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER4 |
| (FullPartName "JUMPER4.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (JUMPER11 |
| (FullPartName "JUMPER11.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (7404 |
| (FullPartName "7404.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (0 |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\PSPICE\SOURCE.OLB") |
| (DeviceIndex "0")) |
| (CON1 |
| (FullPartName "CON1.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (2N1069 |
| (FullPartName "2N1069.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (2N2903 |
| (FullPartName "2N2903.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7406 |
| (FullPartName "7406.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (2N1132A |
| (FullPartName "2N1132A.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7403 |
| (FullPartName "7403.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (JUMPER10 |
| (FullPartName "JUMPER10.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR AC" |
| (FullPartName "MOTOR AC.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR STEPPER" |
| (FullPartName "MOTOR STEPPER.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| (TC4077B |
| (FullPartName "TC4077B.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/Motory/AC_3F/zaloha/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/DC/Regulatory/REGULATOR_LETADLO.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/DC/Regulatory/REGULATOR_LETADLO.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/DC/Regulatory/Regulator_letadlo.opj |
|---|
| 0,0 → 1,55 |
| (ExpressProject "Regulator_letadlo" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\regulator_letadlo.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (FDS4435 |
| (FullPartName "FDS4435.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR AC" |
| (FullPartName "MOTOR AC.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\Motory\DC\Regulatory\regulator_letadlo.dsn") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\Motory\DC\Regulatory\regulator_letadlo.dsn" |
| "SCHEMATIC1") |
| (Select "Design Resources" |
| "D:\@Kaklik\schemata\Motory\DC\Regulatory\regulator_letadlo.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/Motory/DC/Regulatory/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/MOTOR BOARD.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/MOTOR BOARD.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/MOTOR BOARD.EDN |
|---|
| 0,0 → 1,237 |
| (edif (rename LED_board "LED board") |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2002 06 02 13 31 40) |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 23, 2002") |
| (comment "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell R |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT))))) |
| (cell JUMPER5 |
| (cellType generic) |
| (comment "From OrCAD library CONNECTOR.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT))))) |
| (cell LED |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell (rename LED_board "LED board") |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance R1 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R2 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R3 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R4 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R5 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R6 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R7 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R8 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMPER5 |
| (libraryRef OrCAD_LIB)))) |
| (instance D1 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D2 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D3 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D4 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D5 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D6 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D7 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D8 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D9 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (net N05262 |
| (joined |
| (portRef &2 (instanceRef D7)))) |
| (net N05090 |
| (joined |
| (portRef &2 (instanceRef D5)))) |
| (net N05060 |
| (joined |
| (portRef &2 (instanceRef D3)))) |
| (net N05075 |
| (joined |
| (portRef &2 (instanceRef D4)))) |
| (net N05105 |
| (joined |
| (portRef &2 (instanceRef D6)))) |
| (net N05045 |
| (joined |
| (portRef &2 (instanceRef D2)))) |
| (net N05895 |
| (joined |
| (portRef &2 (instanceRef D8)))) |
| (net N06519 |
| (joined |
| (portRef &2 (instanceRef D1)))) |
| (net N06561 |
| (joined |
| (portRef &1 (instanceRef D9)) |
| (portRef &9 (instanceRef J3)))) |
| (net N05788 |
| (joined |
| (portRef &2 (instanceRef D9)) |
| (portRef &10 (instanceRef J3)))) |
| (net N02327 |
| (joined |
| (portRef &2 (instanceRef R5)) |
| (portRef &5 (instanceRef J3)))) |
| (net N000910 |
| (joined |
| (portRef &1 (instanceRef R5)) |
| (portRef &1 (instanceRef D5)))) |
| (net N02513 |
| (joined |
| (portRef &2 (instanceRef R6)) |
| (portRef &6 (instanceRef J3)))) |
| (net N001130 |
| (joined |
| (portRef &1 (instanceRef D6)) |
| (portRef &1 (instanceRef R6)))) |
| (net N02272 |
| (joined |
| (portRef &2 (instanceRef R7)) |
| (portRef &7 (instanceRef J3)))) |
| (net N001350 |
| (joined |
| (portRef &1 (instanceRef D7)) |
| (portRef &1 (instanceRef R7)))) |
| (net N02086 |
| (joined |
| (portRef &8 (instanceRef J3)) |
| (portRef &2 (instanceRef R8)))) |
| (net N001570 |
| (joined |
| (portRef &1 (instanceRef D8)) |
| (portRef &1 (instanceRef R8)))) |
| (net N07364 |
| (joined |
| (portRef &2 (instanceRef R1)) |
| (portRef &1 (instanceRef J3)))) |
| (net N000030 |
| (joined |
| (portRef &1 (instanceRef D1)) |
| (portRef &1 (instanceRef R1)))) |
| (net N04007 |
| (joined |
| (portRef &2 (instanceRef J3)) |
| (portRef &2 (instanceRef R2)))) |
| (net N000250 |
| (joined |
| (portRef &1 (instanceRef D2)) |
| (portRef &1 (instanceRef R2)))) |
| (net N02382 |
| (joined |
| (portRef &3 (instanceRef J3)) |
| (portRef &2 (instanceRef R3)))) |
| (net N000470 |
| (joined |
| (portRef &1 (instanceRef R3)) |
| (portRef &1 (instanceRef D3)))) |
| (net N03322 |
| (joined |
| (portRef &2 (instanceRef R4)) |
| (portRef &4 (instanceRef J3)))) |
| (net N000690 |
| (joined |
| (portRef &1 (instanceRef R4)) |
| (portRef &1 (instanceRef D4)))))))) |
| (design (rename LED_board "LED board") |
| (cellRef LED_board |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/MOTOR BOARD.ERR |
|---|
| 0,0 → 1,4 |
| AutoECO Error Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| No errors found |
| /schemata/Motory/MOTOR BOARD.EXP |
|---|
| 0,0 → 1,0 |
| "DESIGN" "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" "LOGICAL" |
| /schemata/Motory/MOTOR BOARD.LIS |
|---|
| 0,0 → 1,57 |
| AutoECO Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| If "*EOF*" immediately follows, no changes were made |
| Adding footprint R |
| Adding package R |
| Adding package LED |
| Adding package JUMPER5 |
| Adding component R6 |
| Adding component D1 |
| Found library footprint with same name as part LED |
| Adding component D2 |
| Adding component R7 |
| Adding component D3 |
| Adding component D4 |
| Adding component R1 |
| Adding component R8 |
| Adding component D5 |
| Adding component R2 |
| Adding component D6 |
| Adding component D7 |
| Adding component D9 |
| Adding component R3 |
| Adding component D8 |
| Adding component R4 |
| Adding component R5 |
| Adding component J3 |
| Found footprint BLKCON.100/VH/TM2OE/W.200/10 from PRT file for part JUMPER5, comp J3 |
| Adding net N000250 |
| Adding net N000470 |
| Adding net N000690 |
| Adding net N000910 |
| Adding net N001130 |
| Adding net N001350 |
| Adding net N001570 |
| Adding net N05262 |
| Adding net N05090 |
| Adding net N05060 |
| Adding net N05075 |
| Adding net N05105 |
| Adding net N05045 |
| Adding net N05895 |
| Adding net N06519 |
| Adding net N000030 |
| Adding net N02513 |
| Adding net N02382 |
| Adding net N02272 |
| Adding net N02327 |
| Adding net N06561 |
| Adding net N05788 |
| Adding net N03322 |
| Adding net N02086 |
| Adding net N07364 |
| Adding net N04007 |
| Deleting net DEFAULT |
| *EOF* |
| No errors found |
| /schemata/Motory/MOTOR BOARD.MAX |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/MOTOR BOARD.MNL |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/MOTOR BOARD.NET |
|---|
| 0,0 → 1,125 |
| (netlist "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" |
| (compinst "D1" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D2" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D3" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D4" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D5" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D6" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D7" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D8" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D9" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "J3" |
| (patternName "JUMPER5") |
| (compvalue "JUMPER5")) |
| (compinst "R1" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R2" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R3" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R4" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R5" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R6" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R7" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R8" |
| (patternName "R") |
| (compvalue "220")) |
| (net "N000250" |
| (node "D2" "1") |
| (node "R2" "1")) |
| (net "N000470" |
| (node "R3" "1") |
| (node "D3" "1")) |
| (net "N000690" |
| (node "R4" "1") |
| (node "D4" "1")) |
| (net "N000910" |
| (node "R5" "1") |
| (node "D5" "1")) |
| (net "N001130" |
| (node "D6" "1") |
| (node "R6" "1")) |
| (net "N001350" |
| (node "D7" "1") |
| (node "R7" "1")) |
| (net "N001570" |
| (node "D8" "1") |
| (node "R8" "1")) |
| (net "N05262" |
| (node "D7" "2")) |
| (net "N05090" |
| (node "D5" "2")) |
| (net "N05060" |
| (node "D3" "2")) |
| (net "N05075" |
| (node "D4" "2")) |
| (net "N05105" |
| (node "D6" "2")) |
| (net "N05045" |
| (node "D2" "2")) |
| (net "N05895" |
| (node "D8" "2")) |
| (net "N06519" |
| (node "D1" "2")) |
| (net "N000030" |
| (node "D1" "1") |
| (node "R1" "1")) |
| (net "N02513" |
| (node "R6" "2") |
| (node "J3" "6")) |
| (net "N02382" |
| (node "J3" "3") |
| (node "R3" "2")) |
| (net "N02272" |
| (node "R7" "2") |
| (node "J3" "7")) |
| (net "N02327" |
| (node "R5" "2") |
| (node "J3" "5")) |
| (net "N06561" |
| (node "D9" "1") |
| (node "J3" "9")) |
| (net "N05788" |
| (node "D9" "2") |
| (node "J3" "10")) |
| (net "N03322" |
| (node "R4" "2") |
| (node "J3" "4")) |
| (net "N02086" |
| (node "J3" "8") |
| (node "R8" "2")) |
| (net "N07364" |
| (node "R1" "2") |
| (node "J3" "1")) |
| (net "N04007" |
| (node "J3" "2") |
| (node "R2" "2"))) |
| /schemata/Motory/MOTOR BOARD.ONL |
|---|
| 0,0 → 1,265 |
| (PCB "MOTOR BOARD" |
| (description |
| (timeStamp "2002 06 02 07 16 34") |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Saturday, March 23, 2002") |
| (document "D:\\@KAKLIK\\MOTOR\\MOTOR BOARD.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMPER5 |
| (place J3 |
| (property |
| (timestamp 00000683) |
| ("Source Package" JUMPER5) |
| (Value JUMPER5)))) |
| (component LED |
| (place D1 |
| (property |
| (timestamp 00000003) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D2 |
| (property |
| (timestamp 00000019) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D3 |
| (property |
| (timestamp 0000002F) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D4 |
| (property |
| (timestamp 00000045) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D5 |
| (property |
| (timestamp 0000005B) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D6 |
| (property |
| (timestamp 00000071) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D7 |
| (property |
| (timestamp 00000087) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D8 |
| (property |
| (timestamp 0000009D) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D9 |
| (property |
| (timestamp 00001905) |
| ("Source Package" LED) |
| (Value LED)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000227) |
| ("Source Package" R) |
| (Value 220))) |
| (place R2 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000024A) |
| ("Source Package" R) |
| (Value 220))) |
| (place R3 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000026D) |
| ("Source Package" R) |
| (Value 220))) |
| (place R4 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000290) |
| ("Source Package" R) |
| (Value 220))) |
| (place R5 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002B3) |
| ("Source Package" R) |
| (Value 220))) |
| (place R6 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002D6) |
| ("Source Package" R) |
| (Value 220))) |
| (place R7 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002F9) |
| ("Source Package" R) |
| (Value 220))) |
| (place R8 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000031C) |
| ("Source Package" R) |
| (Value 220))))) |
| (library |
| (image R |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMPER5 |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\CONNECTOR.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4)))) |
| (image LED |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname ANODE) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname CATHODE) |
| (pintype 4))))) |
| (network |
| (net N000250 |
| (pins |
| D2-1 R2-1)) |
| (net N000470 |
| (pins |
| R3-1 D3-1)) |
| (net N000690 |
| (pins |
| R4-1 D4-1)) |
| (net N000910 |
| (pins |
| R5-1 D5-1)) |
| (net N001130 |
| (pins |
| D6-1 R6-1)) |
| (net N001350 |
| (pins |
| D7-1 R7-1)) |
| (net N001570 |
| (pins |
| D8-1 R8-1)) |
| (net N05262 |
| (pins |
| D7-2)) |
| (net N05090 |
| (pins |
| D5-2)) |
| (net N05060 |
| (pins |
| D3-2)) |
| (net N05075 |
| (pins |
| D4-2)) |
| (net N05105 |
| (pins |
| D6-2)) |
| (net N05045 |
| (pins |
| D2-2)) |
| (net N05895 |
| (pins |
| D8-2)) |
| (net N06519 |
| (pins |
| D1-2)) |
| (net N000030 |
| (pins |
| D1-1 R1-1)) |
| (net N02513 |
| (pins |
| R6-2 J3-6)) |
| (net N02382 |
| (pins |
| J3-3 R3-2)) |
| (net N02272 |
| (pins |
| R7-2 J3-7)) |
| (net N02327 |
| (pins |
| R5-2 J3-5)) |
| (net N06561 |
| (pins |
| D9-1 J3-9)) |
| (net N05788 |
| (pins |
| D9-2 J3-10)) |
| (net N03322 |
| (pins |
| R4-2 J3-4)) |
| (net N02086 |
| (pins |
| J3-8 R8-2)) |
| (net N07364 |
| (pins |
| R1-2 J3-1)) |
| (net N04007 |
| (pins |
| J3-2 R2-2))) |
| ) |
| /schemata/Motory/TEST.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/TEST.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/TRANZISTORY.LLB |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/ULN2003.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/ULN2003.DRC |
|---|
| 0,0 → 1,104 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking Off-Page Connections |
| Checking Pin to Port Connections |
| Checking for Invalid References |
| Checking for Duplicate References |
| Checking for Compatibility with SDT |
| Reporting Off-Grid Objects |
| Reporting Net Names |
| N36937 |
| N37144 |
| N37348 |
| N37007 |
| N37211 |
| N36870 |
| N37074 |
| N37418 |
| N37281 |
| N36800 |
| N40223 |
| N40337 |
| N40406 |
| N42209 |
| N42326 |
| N41046 |
| N42437 |
| N42556 |
| N42675 |
| N42794 |
| N43077 |
| N43185 |
| N43293 |
| N43401 |
| N25451 |
| N19393 |
| N13996 |
| N13617 |
| N14493 |
| N13703 |
| N19493 |
| N15219 |
| N13531 |
| N14688 |
| N13359 |
| N14585 |
| N25474 |
| N14796 |
| N15322 |
| N19443 |
| N25409 |
| N15006 |
| N14903 |
| N13445 |
| N18998 |
| N19048 |
| N19217 |
| N40597 |
| N19163 |
| N51332 |
| N37732 |
| N37627 |
| N51243 |
| N37522 |
| N51109 |
| N55592 |
| N54463 |
| N50188 |
| N50158 |
| N38097 |
| N53250 |
| N53070 |
| N38198 |
| N50008 |
| N50032 |
| +5V |
| VCC |
| Alternate Name: Vcc |
| GND |
| N61737 |
| N60796 |
| N61407 |
| N61514 |
| N61077 |
| N60981 |
| N61630 |
| N60885 |
| N61173 |
| N60391 |
| N59355 |
| N59497 |
| /schemata/Motory/ULN2003.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/ULN2003.EDN |
|---|
| 0,0 → 1,520 |
| (edif SCHEMATIC1 |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2003 03 27 12 18 04) |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 22, 2003") |
| (comment "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell DB9F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT))))) |
| (cell DB25M |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DB25F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DIP16_300 |
| (cellType generic) |
| (comment "From OrCAD library DECALES.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell ULN2003 |
| (cellType generic) |
| (comment "From OrCAD library RUZNE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell JUMP3 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT))))) |
| (cell JUMP5 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT))))) |
| (cell JUMP4 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT))))) |
| (cell JUMP8 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT))))) |
| (cell PHONEJACKSTEREO |
| (cellType generic) |
| (comment "From OrCAD library _SENO_.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &3 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &1 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell SCHEMATIC1 |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance CON2 |
| (viewRef NetlistView |
| (cellRef DB9F |
| (libraryRef OrCAD_LIB)))) |
| (instance CON4 |
| (viewRef NetlistView |
| (cellRef DB25M |
| (libraryRef OrCAD_LIB)))) |
| (instance CON5 |
| (viewRef NetlistView |
| (cellRef DB25F |
| (libraryRef OrCAD_LIB)))) |
| (instance U1 |
| (viewRef NetlistView |
| (cellRef DIP16_300 |
| (libraryRef OrCAD_LIB)))) |
| (instance U2 |
| (viewRef NetlistView |
| (cellRef ULN2003 |
| (libraryRef OrCAD_LIB)))) |
| (instance J11 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J12 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J13 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J14 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J1 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J2 |
| (viewRef NetlistView |
| (cellRef JUMP4 |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMP8 |
| (libraryRef OrCAD_LIB)))) |
| (instance J4 |
| (viewRef NetlistView |
| (cellRef PHONEJACKSTEREO |
| (libraryRef OrCAD_LIB)))) |
| (instance J5 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J6 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J7 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J8 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (net N19443 |
| (joined |
| (portRef &4 (instanceRef CON2)) |
| (portRef &6 (instanceRef U1)) |
| (portRef &2 (instanceRef J6)))) |
| (net N13996 |
| (joined |
| (portRef &2 (instanceRef J2)) |
| (portRef &14 (instanceRef CON4)) |
| (portRef &3 (instanceRef U1)))) |
| (net N19393 |
| (joined |
| (portRef &3 (instanceRef CON2)) |
| (portRef &5 (instanceRef U1)) |
| (portRef &1 (instanceRef J6)))) |
| (net N19493 |
| (joined |
| (portRef &7 (instanceRef CON2)) |
| (portRef &7 (instanceRef U1)) |
| (portRef &3 (instanceRef J6)))) |
| (net N25451 |
| (joined |
| (portRef &4 (instanceRef U1)) |
| (portRef &3 (instanceRef J2)) |
| (portRef &16 (instanceRef CON4)))) |
| (net N25409 |
| (joined |
| (portRef &1 (instanceRef J2)) |
| (portRef &1 (instanceRef CON4)) |
| (portRef &2 (instanceRef U1)))) |
| (net N15322 |
| (joined |
| (portRef &2 (instanceRef CON4)) |
| (portRef &8 (instanceRef J3)) |
| (portRef &1 (instanceRef U1)))) |
| (net N13359 |
| (joined |
| (portRef &10 (instanceRef CON4)) |
| (portRef &5 (instanceRef J1)) |
| (portRef &10 (instanceRef CON5)))) |
| (net N13445 |
| (joined |
| (portRef &11 (instanceRef CON4)) |
| (portRef &4 (instanceRef J1)) |
| (portRef &11 (instanceRef CON5)))) |
| (net N13531 |
| (joined |
| (portRef &12 (instanceRef CON4)) |
| (portRef &3 (instanceRef J1)) |
| (portRef &12 (instanceRef CON5)))) |
| (net N13617 |
| (joined |
| (portRef &13 (instanceRef CON4)) |
| (portRef &2 (instanceRef J1)) |
| (portRef &13 (instanceRef CON5)))) |
| (net N36937 |
| (joined |
| (portRef &20 (instanceRef CON4)) |
| (portRef &1 (instanceRef J13)))) |
| (net N37144 |
| (joined |
| (portRef &21 (instanceRef CON5)) |
| (portRef &2 (instanceRef J12)))) |
| (net N37348 |
| (joined |
| (portRef &23 (instanceRef CON4)) |
| (portRef &1 (instanceRef J8)))) |
| (net N37007 |
| (joined |
| (portRef &20 (instanceRef CON5)) |
| (portRef &2 (instanceRef J13)))) |
| (net N37211 |
| (joined |
| (portRef &22 (instanceRef CON4)) |
| (portRef &1 (instanceRef J11)))) |
| (net N36870 |
| (joined |
| (portRef &19 (instanceRef CON5)) |
| (portRef &2 (instanceRef J14)))) |
| (net N37074 |
| (joined |
| (portRef &21 (instanceRef CON4)) |
| (portRef &1 (instanceRef J12)))) |
| (net N37418 |
| (joined |
| (portRef &23 (instanceRef CON5)) |
| (portRef &2 (instanceRef J8)))) |
| (net N37281 |
| (joined |
| (portRef &22 (instanceRef CON5)) |
| (portRef &2 (instanceRef J11)))) |
| (net N36800 |
| (joined |
| (portRef &19 (instanceRef CON4)) |
| (portRef &1 (instanceRef J14)))) |
| (net N28601 |
| (joined |
| (portRef &24 (instanceRef CON4)) |
| (portRef &2 (instanceRef J7)))) |
| (net N13703 |
| (joined |
| (portRef &15 (instanceRef CON4)) |
| (portRef &1 (instanceRef J1)) |
| (portRef &15 (instanceRef CON5)))) |
| (net N25474 |
| (joined |
| (portRef &17 (instanceRef CON4)) |
| (portRef &4 (instanceRef J2)) |
| (portRef &17 (instanceRef CON5)))) |
| (net N40223 |
| (joined |
| (portRef &10 (instanceRef U1)) |
| (portRef &3 (instanceRef J14)))) |
| (net N40337 |
| (joined |
| (portRef &11 (instanceRef U1)) |
| (portRef &3 (instanceRef J13)))) |
| (net N40406 |
| (joined |
| (portRef &12 (instanceRef U1)) |
| (portRef &3 (instanceRef J12)))) |
| (net N19163 |
| (joined |
| (portRef &6 (instanceRef CON2)) |
| (portRef &3 (instanceRef J5)))) |
| (net N19217 |
| (joined |
| (portRef &4 (instanceRef J5)) |
| (portRef &8 (instanceRef CON2)))) |
| (net N19271 |
| (joined |
| (portRef &9 (instanceRef CON2)) |
| (portRef &5 (instanceRef J5)))) |
| (net N19048 |
| (joined |
| (portRef &2 (instanceRef CON2)) |
| (portRef &3 (instanceRef J11)) |
| (portRef &2 (instanceRef J5)))) |
| (net N18998 |
| (joined |
| (portRef &1 (instanceRef J5)) |
| (portRef &1 (instanceRef CON2)) |
| (portRef &3 (instanceRef J8)))) |
| (net N14796 |
| (joined |
| (portRef &4 (instanceRef J3)) |
| (portRef &4 (instanceRef U2)) |
| (portRef &6 (instanceRef CON4)))) |
| (net N15006 |
| (joined |
| (portRef &4 (instanceRef CON4)) |
| (portRef &6 (instanceRef U2)) |
| (portRef &6 (instanceRef J3)))) |
| (net N14903 |
| (joined |
| (portRef &5 (instanceRef CON4)) |
| (portRef &5 (instanceRef U2)) |
| (portRef &5 (instanceRef J3)))) |
| (net N14585 |
| (joined |
| (portRef &8 (instanceRef CON4)) |
| (portRef &2 (instanceRef U2)) |
| (portRef &2 (instanceRef J3)))) |
| (net N14688 |
| (joined |
| (portRef &7 (instanceRef CON4)) |
| (portRef &3 (instanceRef J3)) |
| (portRef &3 (instanceRef U2)))) |
| (net N14493 |
| (joined |
| (portRef &1 (instanceRef J3)) |
| (portRef &9 (instanceRef CON4)) |
| (portRef &1 (instanceRef U2)))) |
| (net N15219 |
| (joined |
| (portRef &3 (instanceRef CON4)) |
| (portRef &7 (instanceRef U2)) |
| (portRef &7 (instanceRef J3)))) |
| (net N42209 |
| (joined |
| (portRef &15 (instanceRef U2)) |
| (portRef &8 (instanceRef CON5)))) |
| (net (rename PLUSV "+V") |
| (joined |
| (portRef &9 (instanceRef U1)) |
| (portRef &3 (instanceRef J4)) |
| (portRef &2 (instanceRef J4)) |
| (portRef &1 (instanceRef J7)) |
| (portRef &24 (instanceRef CON5)) |
| (portRef &9 (instanceRef U2)))) |
| (net N42326 |
| (joined |
| (portRef &14 (instanceRef U2)) |
| (portRef &7 (instanceRef CON5)))) |
| (net N41046 |
| (joined |
| (portRef &16 (instanceRef U2)) |
| (portRef &9 (instanceRef CON5)))) |
| (net N42437 |
| (joined |
| (portRef &13 (instanceRef U2)) |
| (portRef &6 (instanceRef CON5)))) |
| (net N42556 |
| (joined |
| (portRef &12 (instanceRef U2)) |
| (portRef &5 (instanceRef CON5)))) |
| (net N42675 |
| (joined |
| (portRef &11 (instanceRef U2)) |
| (portRef &4 (instanceRef CON5)))) |
| (net N42794 |
| (joined |
| (portRef &10 (instanceRef U2)) |
| (portRef &3 (instanceRef CON5)))) |
| (net GND |
| (joined |
| (portRef &5 (instanceRef CON2)) |
| (portRef &25 (instanceRef CON4)) |
| (portRef &8 (instanceRef U2)) |
| (portRef &8 (instanceRef U1)) |
| (portRef &18 (instanceRef CON4)) |
| (portRef &1 (instanceRef J4)) |
| (portRef &3 (instanceRef J7)) |
| (portRef &25 (instanceRef CON5)) |
| (portRef &18 (instanceRef CON5)))) |
| (net N43077 |
| (joined |
| (portRef &16 (instanceRef U1)) |
| (portRef &2 (instanceRef CON5)))) |
| (net N43185 |
| (joined |
| (portRef &15 (instanceRef U1)) |
| (portRef &1 (instanceRef CON5)))) |
| (net N43293 |
| (joined |
| (portRef &14 (instanceRef U1)) |
| (portRef &14 (instanceRef CON5)))) |
| (net N43401 |
| (joined |
| (portRef &13 (instanceRef U1)) |
| (portRef &16 (instanceRef CON5)))))))) |
| (design SCHEMATIC1 |
| (cellRef SCHEMATIC1 |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/ULN2003.ONL |
|---|
| 0,0 → 1,962 |
| (PCB ULN2003 |
| (description |
| (timeStamp "2003 03 07 16 13 27") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Friday, March 07, 2003") |
| (document "D:\\@KAKLIK\\SCHEMATA\\MOTOR\\ULN2003.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP1 |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010D0D) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010D31) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J4 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010DA7) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J5 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010DC1) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component DB25F |
| (place CON5 |
| (property |
| ("PCB Footprint" CANNON25F_90) |
| (Device DB25F) |
| (timestamp 0000802E) |
| ("Source Package" DB25F) |
| (Value PRINT_OUT)))) |
| (component JUMP3 |
| (place J11 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 0000959E) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J12 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 000095B8) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J13 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 000095D2) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J14 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 000095EC) |
| ("Source Package" JUMP3) |
| (Value JUMP3))) |
| (place J8 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 00009584) |
| ("Source Package" JUMP3) |
| (Value JUMP3)))) |
| (component JUMP5 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP5) |
| (Device JUMP5) |
| (timestamp 00010384) |
| ("Source Package" JUMP5) |
| (Value vstup_com)))) |
| (component DIP16_300 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000003) |
| ("Source Package" DIP16_300) |
| (Value ULN2003)))) |
| (component DB25M |
| (place CON4 |
| (property |
| ("PCB Footprint" CANNON25M_90) |
| (Device DB25M) |
| (timestamp 00007C8F) |
| ("Source Package" DB25M) |
| (Value PRINT_IN)))) |
| (component KP_1040 |
| (place U3 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 0000B8E8) |
| ("Source Package" KP_1040) |
| (Value KP_1040))) |
| (place U4 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 0000B936) |
| ("Source Package" KP_1040) |
| (Value KP_1040)))) |
| (component ULN2003 |
| (place U2 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 0000477B) |
| ("Source Package" ULN2003) |
| (Value ULN2003)))) |
| (component DB9F |
| (place CON2 |
| (property |
| ("PCB Footprint" CANNON9F_90) |
| (Device DB9F) |
| (timestamp 000048B5) |
| ("Source Package" DB9F) |
| (Value COM_IN)))) |
| (component CROSS |
| (place M1 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 000014D3) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M2 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C4C) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M3 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C60) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M4 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C74) |
| ("Source Package" CROSS) |
| (Value CROSS)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DF37) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DF4D) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DF63) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000DFE9) |
| ("Source Package" R) |
| (Value R))) |
| (place R5 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E158) |
| ("Source Package" R) |
| (Value R))) |
| (place R7 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E1E9) |
| ("Source Package" R) |
| (Value R))) |
| (place R8 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E31A) |
| ("Source Package" R) |
| (Value R))) |
| (place R9 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000E37F) |
| ("Source Package" R) |
| (Value R))))) |
| (library |
| (image DB9F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB9F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4)))) |
| (image DB25M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DB25F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DIP16_300 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\DECALES.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4)))) |
| (image ULN2003 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4)))) |
| (image KP_1040 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMP3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP3)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image CROSS |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SYMBOLS.OLB) |
| (Device CROSS))) |
| (image JUMP5 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP5)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4)))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))))) |
| (network |
| (net N42794 |
| (pins |
| U2-10 CON5-3)) |
| (net N43077 |
| (pins |
| U1-16 CON5-2)) |
| (net N43185 |
| (pins |
| U1-15 CON5-1)) |
| (net N43293 |
| (pins |
| U1-14 CON5-14)) |
| (net N43401 |
| (pins |
| U1-13 CON5-16)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| U1-9 CON5-24 J4-1 U2-9)) |
| (net +5V |
| (property |
| (nettype S)) |
| (pins |
| U3-16 U3-14 U3-12 U3-10 U4-10 U4-14 U4-16 U4-12 J2-1)) |
| (net N18998 |
| (pins |
| J1-1 CON2-1 U3-15)) |
| (net N19048 |
| (pins |
| CON2-2 U3-13 J1-2)) |
| (net N19163 |
| (pins |
| CON2-6 U4-9)) |
| (net N19217 |
| (pins |
| J1-4 CON2-8)) |
| (net N19393 |
| (pins |
| U1-5 CON2-3)) |
| (net N19443 |
| (pins |
| CON2-4 U1-6)) |
| (net N19493 |
| (pins |
| CON2-7 U1-7)) |
| (net N13359 |
| (pins |
| CON4-10 U4-15)) |
| (net N13445 |
| (pins |
| CON4-11 U4-13)) |
| (net N13531 |
| (pins |
| CON4-12 U4-11)) |
| (net N13617 |
| (pins |
| CON4-13 U3-9)) |
| (net N13703 |
| (pins |
| CON4-15 U3-11)) |
| (net N14585 |
| (pins |
| CON4-8 U2-2)) |
| (net N14796 |
| (pins |
| U2-4 CON4-6)) |
| (net N14493 |
| (pins |
| CON4-9 U2-1)) |
| (net N14903 |
| (pins |
| CON4-5 U2-5)) |
| (net N15006 |
| (pins |
| CON4-4 U2-6)) |
| (net N15322 |
| (pins |
| CON4-2 U1-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| CON4-24 CON4-25 U2-8 U1-8 CON4-18 CON5-25 CON5-18 U3-2 U3-4 |
| U3-6 U3-8 U4-2 U4-4 U4-6 U4-8 CON2-5 J3-1 J5-1)) |
| (net N15219 |
| (pins |
| CON4-3 U2-7)) |
| (net N25409 |
| (pins |
| CON4-1 U1-2)) |
| (net N13996 |
| (pins |
| CON4-14 U1-3)) |
| (net N25451 |
| (pins |
| U1-4 CON4-16)) |
| (net N25474 |
| (pins |
| CON4-17 CON5-17)) |
| (net N51109 |
| (pins |
| U4-1 R1-1)) |
| (net N51243 |
| (pins |
| U4-3 R2-1)) |
| (net N51332 |
| (pins |
| U4-5 R3-1)) |
| (net N55592 |
| (pins |
| R4-2 J1-3)) |
| (net N36937 |
| (pins |
| CON4-20 J13-1)) |
| (net N37144 |
| (pins |
| CON5-21 J12-2)) |
| (net N53250 |
| (pins |
| U3-7 R5-2)) |
| (net N53070 |
| (pins |
| U3-5 R7-2)) |
| (net N37348 |
| (pins |
| CON4-23 J8-1)) |
| (net N37007 |
| (pins |
| CON5-20 J13-2)) |
| (net N37211 |
| (pins |
| CON4-22 J11-1)) |
| (net N36870 |
| (pins |
| CON5-19 J14-2)) |
| (net N37074 |
| (pins |
| CON4-21 J12-1)) |
| (net N37418 |
| (pins |
| CON5-23 J8-2)) |
| (net N37281 |
| (pins |
| CON5-22 J11-2)) |
| (net N36800 |
| (pins |
| CON4-19 J14-1)) |
| (net N40223 |
| (pins |
| U1-10 J14-3)) |
| (net N40337 |
| (pins |
| U1-11 J13-3)) |
| (net N40406 |
| (pins |
| U1-12 J12-3)) |
| (net N50188 |
| (pins |
| U3-3 R8-2)) |
| (net N50032 |
| (pins |
| U3-1 R9-2)) |
| (net N50008 |
| (pins |
| J8-3 R9-1)) |
| (net N37522 |
| (pins |
| CON5-10 R1-2)) |
| (net N37627 |
| (pins |
| CON5-11 R2-2)) |
| (net N37732 |
| (pins |
| CON5-12 R3-2)) |
| (net N50158 |
| (pins |
| R8-1 J11-3)) |
| (net N40597 |
| (pins |
| CON2-9 J1-5)) |
| (net N38198 |
| (pins |
| CON5-15 R7-1)) |
| (net N38097 |
| (pins |
| CON5-13 R5-1)) |
| (net N14688 |
| (pins |
| CON4-7 U2-3)) |
| (net N54463 |
| (pins |
| U4-7 R4-1)) |
| (net N42209 |
| (pins |
| U2-15 CON5-8)) |
| (net N42326 |
| (pins |
| U2-14 CON5-7)) |
| (net N41046 |
| (pins |
| U2-16 CON5-9)) |
| (net N42437 |
| (pins |
| U2-13 CON5-6)) |
| (net N42556 |
| (pins |
| U2-12 CON5-5)) |
| (net N42675 |
| (pins |
| U2-11 CON5-4))) |
| ) |
| /schemata/Motory/ULN2003.asc |
|---|
| 0,0 → 1,173 |
| *PADS-PCB* |
| *PART* |
| CON2 DB9F@CANNON9F_90 |
| CON4 DB25M@CANNON25M_90 |
| CON5 DB25F@CANNON25F_90 |
| J1 JUMP5@JUMP5 |
| J11 JUMP3@JUMP3 |
| J12 JUMP3@JUMP3 |
| J13 JUMP3@JUMP3 |
| J14 JUMP3@JUMP3 |
| J2 JUMP1@JUMP1 |
| J3 JUMP1@JUMP1 |
| J4 JUMP1@JUMP1 |
| J5 JUMP1@JUMP1 |
| J8 JUMP3@JUMP3 |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 CROSS@CROSS |
| R1 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| R5 R@RL090 |
| R7 R@RL090 |
| R8 R@RL090 |
| R9 R@RL090 |
| U1 DIP16@DIP16_300 |
| U2 DIP16@DIP16_300 |
| U3 DIP16@DIP16_300 |
| U4 DIP16@DIP16_300 |
| *NET* |
| *SIGNAL* N42794 |
| U2.10 CON5.3 |
| *SIGNAL* N43077 |
| U1.16 CON5.2 |
| *SIGNAL* N43185 |
| U1.15 CON5.1 |
| *SIGNAL* N43293 |
| U1.14 CON5.14 |
| *SIGNAL* N43401 |
| U1.13 CON5.16 |
| *SIGNAL* VCC |
| U1.9 CON5.24 J4.1 U2.9 |
| *SIGNAL* +5V |
| U3.16 U3.14 U3.12 U3.10 U4.10 U4.14 U4.16 U4.12 |
| J2.1 |
| *SIGNAL* N18998 |
| J1.1 CON2.1 U3.15 |
| *SIGNAL* N19048 |
| CON2.2 U3.13 J1.2 |
| *SIGNAL* N19163 |
| CON2.6 U4.9 |
| *SIGNAL* N19217 |
| J1.4 CON2.8 |
| *SIGNAL* N19393 |
| U1.5 CON2.3 |
| *SIGNAL* N19443 |
| CON2.4 U1.6 |
| *SIGNAL* N19493 |
| CON2.7 U1.7 |
| *SIGNAL* N13359 |
| CON4.10 U4.15 |
| *SIGNAL* N13445 |
| CON4.11 U4.13 |
| *SIGNAL* N13531 |
| CON4.12 U4.11 |
| *SIGNAL* N13617 |
| CON4.13 U3.9 |
| *SIGNAL* N13703 |
| CON4.15 U3.11 |
| *SIGNAL* N14585 |
| CON4.8 U2.2 |
| *SIGNAL* N14796 |
| U2.4 CON4.6 |
| *SIGNAL* N14493 |
| CON4.9 U2.1 |
| *SIGNAL* N14903 |
| CON4.5 U2.5 |
| *SIGNAL* N15006 |
| CON4.4 U2.6 |
| *SIGNAL* N15322 |
| CON4.2 U1.1 |
| *SIGNAL* GND |
| CON4.24 CON4.25 U2.8 U1.8 CON4.18 CON5.25 CON5.18 U3.2 |
| U3.4 U3.6 U3.8 U4.2 U4.4 U4.6 U4.8 CON2.5 |
| J3.1 J5.1 |
| *SIGNAL* N15219 |
| CON4.3 U2.7 |
| *SIGNAL* N25409 |
| CON4.1 U1.2 |
| *SIGNAL* N13996 |
| CON4.14 U1.3 |
| *SIGNAL* N25451 |
| U1.4 CON4.16 |
| *SIGNAL* N25474 |
| CON4.17 CON5.17 |
| *SIGNAL* N51109 |
| U4.1 R1.1 |
| *SIGNAL* N51243 |
| U4.3 R2.1 |
| *SIGNAL* N51332 |
| U4.5 R3.1 |
| *SIGNAL* N55592 |
| R4.2 J1.3 |
| *SIGNAL* N36937 |
| CON4.20 J13.1 |
| *SIGNAL* N37144 |
| CON5.21 J12.2 |
| *SIGNAL* N53250 |
| U3.7 R5.2 |
| *SIGNAL* N53070 |
| U3.5 R7.2 |
| *SIGNAL* N37348 |
| CON4.23 J8.1 |
| *SIGNAL* N37007 |
| CON5.20 J13.2 |
| *SIGNAL* N37211 |
| CON4.22 J11.1 |
| *SIGNAL* N36870 |
| CON5.19 J14.2 |
| *SIGNAL* N37074 |
| CON4.21 J12.1 |
| *SIGNAL* N37418 |
| CON5.23 J8.2 |
| *SIGNAL* N37281 |
| CON5.22 J11.2 |
| *SIGNAL* N36800 |
| CON4.19 J14.1 |
| *SIGNAL* N40223 |
| U1.10 J14.3 |
| *SIGNAL* N40337 |
| U1.11 J13.3 |
| *SIGNAL* N40406 |
| U1.12 J12.3 |
| *SIGNAL* N50188 |
| U3.3 R8.2 |
| *SIGNAL* N50032 |
| U3.1 R9.2 |
| *SIGNAL* N50008 |
| J8.3 R9.1 |
| *SIGNAL* N37522 |
| CON5.10 R1.2 |
| *SIGNAL* N37627 |
| CON5.11 R2.2 |
| *SIGNAL* N37732 |
| CON5.12 R3.2 |
| *SIGNAL* N50158 |
| R8.1 J11.3 |
| *SIGNAL* N40597 |
| CON2.9 J1.5 |
| *SIGNAL* N38198 |
| CON5.15 R7.1 |
| *SIGNAL* N38097 |
| CON5.13 R5.1 |
| *SIGNAL* N14688 |
| CON4.7 U2.3 |
| *SIGNAL* N54463 |
| U4.7 R4.1 |
| *SIGNAL* N42209 |
| U2.15 CON5.8 |
| *SIGNAL* N42326 |
| U2.14 CON5.7 |
| *SIGNAL* N41046 |
| U2.16 CON5.9 |
| *SIGNAL* N42437 |
| U2.13 CON5.6 |
| *SIGNAL* N42556 |
| U2.12 CON5.5 |
| *SIGNAL* N42675 |
| U2.11 CON5.4 |
| *END* |
| /schemata/Motory/ULN2003.eco |
|---|
| 0,0 → 1,11 |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Fri Mar 07 17:19:28 2003 |
| *PART* |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 CROSS@CROSS |
| *END* |
| /schemata/Motory/ULN2003.net |
|---|
| 0,0 → 1,102 |
| *PADS-PCB* |
| *PART* |
| CON1 DB25F,DB25F@CANNON25F_90 |
| CON2 DB9F,DB9F@CANNON9F_90 |
| J1 JUMP5,vstup@JUMP5 |
| J10 JUMP2X7,JUMP2X7@JUMP2X7 |
| J2 JUMP4,vstupvystup@JUMP4 |
| J3 JUMP8,vystup@JUMP8 |
| J4 ,PHONEJACKSTEREO@JACK35 |
| J5 JUMP5,vstup_com@JUMP5 |
| J6 JUMP3,vystup_com@JUMP3 |
| J9 JUMP2X7,JUMP2X7@JUMP2X7 |
| U1 DIP16,ULN2003@DIP16_300 |
| U2 DIP16,ULN2003@DIP16_300 |
| *NET* |
| *SIGNAL* N18998 |
| J5.1 CON2.1 |
| *SIGNAL* N19048 |
| J5.2 CON2.2 |
| *SIGNAL* N19163 |
| J5.3 CON2.6 |
| *SIGNAL* N19271 |
| J5.5 CON2.9 |
| *SIGNAL* N19217 |
| J5.4 CON2.8 |
| *SIGNAL* N19393 |
| CON2.3 U1.5 J6.1 |
| *SIGNAL* N19443 |
| CON2.4 U1.6 J6.2 |
| *SIGNAL* N19493 |
| CON2.7 U1.7 J6.3 |
| *SIGNAL* N21675 |
| J9.9 U2.12 |
| *SIGNAL* N21413 |
| J9.3 U2.15 |
| *SIGNAL* N21587 |
| J9.7 U2.13 |
| *SIGNAL* N13359 |
| J1.5 CON1.10 |
| *SIGNAL* N21499 |
| J9.5 U2.14 |
| *SIGNAL* N13445 |
| J1.4 CON1.11 |
| *SIGNAL* N21331 |
| J9.1 U2.16 |
| *SIGNAL* N13531 |
| J1.3 CON1.12 |
| *SIGNAL* N13617 |
| J1.2 CON1.13 |
| *SIGNAL* N13703 |
| CON1.15 J1.1 |
| *SIGNAL* N14585 |
| CON1.8 U2.2 J3.2 |
| *SIGNAL* N14796 |
| CON1.6 U2.4 J3.4 |
| *SIGNAL* N14493 |
| CON1.9 U2.1 J3.1 |
| *SIGNAL* N14903 |
| CON1.5 U2.5 J3.5 |
| *SIGNAL* N15006 |
| CON1.4 U2.6 J3.6 |
| *SIGNAL* N15322 |
| CON1.2 U1.1 J3.8 |
| *SIGNAL* GND |
| CON1.21 CON1.22 CON1.25 CON1.18 CON1.23 CON1.19 CON1.20 U1.8 |
| CON1.24 U2.8 CON2.5 J4.1 |
| *SIGNAL* N15219 |
| CON1.3 U2.7 J3.7 |
| *SIGNAL* N22653 |
| J10.5 U1.14 |
| *SIGNAL* N22313 |
| J9.11 U2.11 |
| *SIGNAL* N22399 |
| J9.13 U2.10 |
| *SIGNAL* N22485 |
| J10.1 U1.16 |
| *SIGNAL* N22999 |
| J10.13 U1.10 |
| *SIGNAL* N22913 |
| J10.11 U1.11 |
| *SIGNAL* N22827 |
| J10.9 U1.12 |
| *SIGNAL* N22567 |
| J10.3 U1.15 |
| *SIGNAL* N22739 |
| J10.7 U1.13 |
| *SIGNAL* N25409 |
| CON1.1 U1.2 J2.1 |
| *SIGNAL* N13996 |
| J2.2 CON1.14 U1.3 |
| *SIGNAL* N25451 |
| CON1.16 U1.4 J2.3 |
| *SIGNAL* N25474 |
| CON1.17 J2.4 |
| *SIGNAL* N14688 |
| CON1.7 U2.3 J3.3 |
| *SIGNAL* +V |
| U1.9 U2.9 J9.2 J9.4 J9.6 J9.8 J9.10 J9.12 |
| J9.14 J10.2 J10.4 J10.6 J10.8 J10.10 J10.12 J10.14 |
| J4.3 J4.2 |
| *END* |
| /schemata/Motory/ULN2003.opj |
|---|
| 0,0 → 1,168 |
| (ExpressProject "ULN2003" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\uln2003.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "ULN2003.asc") |
| (OTHER_Netlist_File2 "ULN2003.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EDIF_Netlist_File "ULN2003.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "TRUE") |
| (DRC_Check_Off-Page_Connectors "TRUE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "TRUE") |
| (DRC_Report_Off-grid_Objects "TRUE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "TRUE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DRC") |
| (RootChangedForceReNetlist "x")) |
| (Folder "Outputs" |
| (File ".\uln2003.net" |
| (Type "Report")) |
| (File ".\uln2003.asc" |
| (Type "Report")) |
| (File ".\uln2003.edn" |
| (Type "Report")) |
| (File ".\uln2003.drc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (DB15F |
| (FullPartName "DB15F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PADRC_5x6 |
| (FullPartName "PADRC_5x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (JUMP5 |
| (FullPartName "JUMP5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PRIM20 |
| (FullPartName "PRIM20.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (PADRC_2x6 |
| (FullPartName "PADRC_2x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (PRIM10 |
| (FullPartName "PRIM10.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB15M |
| (FullPartName "DB15M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (RS232JUMP2X5 |
| (FullPartName "RS232JUMP2X5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (PHONEJACKSTEREO |
| (FullPartName "PHONEJACKSTEREO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\_SENO_.OLB") |
| (DeviceIndex "0")) |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP2X7 |
| (FullPartName "JUMP2X7.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP4 |
| (FullPartName "JUMP4.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DIP16_300 |
| (FullPartName "DIP16_300.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\DECALES.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC1") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC2") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x")) |
| /schemata/Motory/ULN2003.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/layout.log |
|---|
| 0,0 → 1,1498 |
| Wed Mar 20 22:49:21 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:50:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:51:31 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:46 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:47 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:19 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:43 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:44 Windows which were open at time of error: |
| Wed Mar 20 22:53:44 End-of-list |
| Wed Mar 20 22:53:54 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:55 Windows which were open at time of error: |
| Wed Mar 20 22:53:55 ActiveWindow: &Components |
| Wed Mar 20 22:53:55 Icon: &Nets |
| Wed Mar 20 22:53:55 Icon: Post Proces&s |
| Wed Mar 20 22:53:55 Icon: &Route |
| Wed Mar 20 22:53:55 End-of-list |
| Wed Mar 20 22:54:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:27 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:54:27 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:21 Windows which were open at time of error: |
| Wed Mar 20 22:56:21 End-of-list |
| Wed Mar 20 22:57:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:30 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:57:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:10 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:01:10 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:05:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:12:26 No new connections routed. |
| Wed Mar 20 23:12:26 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:12:27 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:13:48 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:29 No new connections routed. |
| Wed Mar 20 23:15:29 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:15:30 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:18:33 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:22:11 No new connections routed. |
| Wed Mar 20 23:22:11 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:43 No new connections routed. |
| Wed Mar 20 23:24:43 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:44 Routed 18 connections in 0 seconds. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:44:52 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:48:34 Routed 2 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 2 out of 29 (6%). |
| Wed Mar 20 23:48:34 Routed 27 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:50:26 Saved as file ~undo.max |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 UserDiv from Layout.INI for AutoECO: 60 |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:07:07 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:15:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:56 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:08 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:16:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:48 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:55 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:19:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:06 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:16:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:10 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:20:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:05 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:35:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:36:27 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:36:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:28 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:30 Windows which were open at time of error: |
| Sat Mar 23 06:26:30 ActiveWindow: &Components |
| Sat Mar 23 06:26:30 Icon: &Nets |
| Sat Mar 23 06:26:30 Icon: Post Proces&s |
| Sat Mar 23 06:26:30 Icon: &Route |
| Sat Mar 23 06:26:30 End-of-list |
| Sat Mar 23 06:34:32 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:52 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:42:32 No new connections routed. |
| Sat Mar 23 06:42:32 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:42:34 Routed 28 connections in 2 seconds. |
| Sat Mar 23 06:42:34 Total is now 28 out of 29 (96%). |
| Sat Mar 23 06:42:36 Routed 1 connections in 1 seconds. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:43:55 No new connections routed. |
| Sat Mar 23 06:43:55 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:44:00 Routed 28 connections in 5 seconds. |
| Sat Mar 23 06:44:00 Total is now 27 out of 29 (93%). |
| Sat Mar 23 06:44:02 Routed 2 connections in 1 seconds. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:45:00 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:54:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| /schemata/Motory/motor board.opj |
|---|
| 0,0 → 1,159 |
| (ExpressProject "motor board" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\motor board.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "0") |
| (EDIF_Netlist_File "MOTOR BOARD.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\NOVÁ SLOKA\MOTOR BOARD.DRC") |
| (LAYOUT_Netlist_File "MOTOR BOARD.MNL") |
| (LAYOUT_PCB_Footprint "{PCB Footprint}") |
| (FALSE) |
| (LAYOUT_Units "1") |
| (TRUE) |
| (FALSE) |
| (RootChangedForceReNetlist "x") |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "MOTOR BOARD.NET") |
| (OTHER_Netlist_File2 "MOTOR BOARD.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "accel.dll") |
| (OTHER_PCB_Footprint "{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EXPORT_Scope "0") |
| (EXPORT_Contents "-1") |
| (EXPORT_File_Name "D:\@KAKLIK\MOTOR\MOTOR BOARD.EXP")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library") |
| (PartMRUSelector |
| (JUMPER16 |
| (FullPartName "JUMPER16.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER5 |
| (FullPartName "JUMPER5.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER4 |
| (FullPartName "JUMPER4.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (JUMPER11 |
| (FullPartName "JUMPER11.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (7404 |
| (FullPartName "7404.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (0 |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\PSPICE\SOURCE.OLB") |
| (DeviceIndex "0")) |
| (CON1 |
| (FullPartName "CON1.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (2N1069 |
| (FullPartName "2N1069.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (2N2903 |
| (FullPartName "2N2903.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7406 |
| (FullPartName "7406.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (2N1132A |
| (FullPartName "2N1132A.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7403 |
| (FullPartName "7403.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (JUMPER10 |
| (FullPartName "JUMPER10.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR AC" |
| (FullPartName "MOTOR AC.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR STEPPER" |
| (FullPartName "MOTOR STEPPER.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| (TC4077B |
| (FullPartName "TC4077B.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/Motory/readme.txt |
|---|
| 0,0 → 1,0 |
| vsechny soucastky jsou ze strany spoju |
| /schemata/Motory/verze2/!readme!.txt |
|---|
| 0,0 → 1,0 |
| vsechny soucastky jsou ze strany spoju |
| /schemata/Motory/verze2/KAKLIK/SPINACE03_u.eco |
|---|
| 0,0 → 1,12 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE03_u.pcb -- Mon Mar 10 13:09:02 2003 |
| *DELPIN* |
| CON4.25 GND |
| *NET* |
| *SIGNAL* +12V 30 |
| CON4.25 CON4.1 |
| *END* |
| /schemata/Motory/verze2/KAKLIK/SPINACE03_u.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/KAKLIK/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/SPINACE.BOM |
|---|
| 0,0 → 1,28 |
| ROBOT DRIVER Revised: Sunday, March 09, 2003 |
| 000 Revision: 1 |
| Bill Of Materials March 9,2003 10:25:18 Page1 |
| Item Quantity Reference Part |
| ______________________________________________ |
| 1 1 CON1 DB25M |
| 2 1 CON3 DB9F |
| 3 1 CON4 DB25F |
| 4 1 C1 10 uF |
| 5 1 D1 D |
| 6 2 J1,J2 JUMP1 |
| 7 1 J3 JUMP2 |
| 8 3 M1,M2,M3 CROSS |
| 9 4 M4,M5,M6,M7 HOLE_M3 |
| 10 1 M8 Kabel |
| 11 6 R1,R2,R3,R11,R12,R13 R |
| 12 2 R4,R14 1k5 |
| 13 2 U1,U2 KP_1040 |
| 14 2 U6,U7 ULN2003 |
| /schemata/Motory/verze2/SPINACE.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/SPINACE.DRC |
|---|
| 0,0 → 1,23 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| WARNING: [DRC0007] Net has no driving source BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections STROBE |
| SCHEMATIC1, PAGE1 (48.26, 22.86) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N04316 |
| SCHEMATIC1, PAGE1 (68.58, 15.24) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N08219 |
| SCHEMATIC1, PAGE1 (68.58, 71.12) |
| Checking for Invalid References |
| Checking for Duplicate References |
| /schemata/Motory/verze2/SPINACE.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/SPINACE.ONL |
|---|
| 0,0 → 1,854 |
| (PCB SPINACE |
| (description |
| (timeStamp "2003 03 09 09 34 16") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "ROBOT DRIVER") |
| (date "Sunday, March 09, 2003") |
| (document "000") |
| (revision "1") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component D |
| (place D1 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 00005091) |
| ("Source Package" D) |
| (Value D)))) |
| (component JUMP1 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000551B) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000552D) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component DB25F |
| (place CON4 |
| (property |
| ("PCB Footprint" CANNON25F_90) |
| (Device DB25F) |
| (timestamp 000042C0) |
| ("Source Package" DB25F) |
| (Value DB25F)))) |
| (component JUMP2 |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP2) |
| (Device JUMP2) |
| (timestamp 0000553F) |
| ("Source Package" JUMP2) |
| (Value JUMP2)))) |
| (component DB25M |
| (place CON1 |
| (property |
| ("PCB Footprint" CANNON25M_90) |
| (Device DB25M) |
| (timestamp 00005BBA) |
| ("Source Package" DB25M) |
| (Value DB25M)))) |
| (component ULN2003 |
| (place U6 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 000002C9) |
| ("Source Package" ULN2003) |
| (Value ULN2003))) |
| (place U7 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000317) |
| ("Source Package" ULN2003) |
| (Value ULN2003)))) |
| (component KP_1040 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000003) |
| ("Source Package" KP_1040) |
| (Value KP_1040))) |
| (place U2 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000051) |
| ("Source Package" KP_1040) |
| (Value KP_1040)))) |
| (component DB9F |
| (place CON3 |
| (property |
| ("PCB Footprint" CANNON9F_90) |
| (Device DB9F) |
| (timestamp 0000350D) |
| ("Source Package" DB9F) |
| (Value DB9F)))) |
| (component HOLE_M3 |
| (place M4 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CC4) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M5 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CD6) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M6 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CE8) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M7 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CFA) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3)))) |
| (component CROSS |
| (place M1 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 000014D3) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M2 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C4C) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M3 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C60) |
| ("Source Package" CROSS) |
| (Value CROSS)))) |
| (component "C-ELYT" |
| (place C1 |
| (property |
| ("PCB Footprint" CE050X13) |
| (Device ELYT) |
| (timestamp 00006890) |
| ("Source Package" "C-ELYT") |
| (Value "10 uF")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000635) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000067B) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000691) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000006A7) |
| ("Source Package" R) |
| (Value 1k5))) |
| (place R11 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000828) |
| ("Source Package" R) |
| (Value R))) |
| (place R12 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000088C) |
| ("Source Package" R) |
| (Value R))) |
| (place R13 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000086A) |
| ("Source Package" R) |
| (Value R))) |
| (place R14 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000008A2) |
| ("Source Package" R) |
| (Value 1k5))))) |
| (library |
| (image DB25M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DB9F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB9F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4)))) |
| (image DB25F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image KP_1040 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname A1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname K1) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname A2) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname K2) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname A3) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname K3) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname A4) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname K4) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname e4) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname c4) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname e3) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname c3) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname e2) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname c2) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname e1) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname c1) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ULN2003 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname I1) |
| (pintype 0))) |
| (pin 999 2 |
| (property |
| (pinname I2) |
| (pintype 0))) |
| (pin 999 3 |
| (property |
| (pinname I3) |
| (pintype 0))) |
| (pin 999 4 |
| (property |
| (pinname I4) |
| (pintype 0))) |
| (pin 999 5 |
| (property |
| (pinname I5) |
| (pintype 0))) |
| (pin 999 6 |
| (property |
| (pinname I6) |
| (pintype 0))) |
| (pin 999 7 |
| (property |
| (pinname I7) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname GND) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname K) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname O7) |
| (pintype 2))) |
| (pin 999 11 |
| (property |
| (pinname O6) |
| (pintype 2))) |
| (pin 999 12 |
| (property |
| (pinname O5) |
| (pintype 2))) |
| (pin 999 13 |
| (property |
| (pinname O4) |
| (pintype 2))) |
| (pin 999 14 |
| (property |
| (pinname O3) |
| (pintype 2))) |
| (pin 999 15 |
| (property |
| (pinname O2) |
| (pintype 2))) |
| (pin 999 16 |
| (property |
| (pinname O1) |
| (pintype 2)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device C)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CROSS |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SYMBOLS.OLB) |
| (Device CROSS))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4)))) |
| (image HOLE_M3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device PAD)) |
| (pin 999 1 |
| (property |
| (pinname PIN) |
| (pintype 4)))) |
| (image JUMP2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image D |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))))) |
| (network |
| (net RTS |
| (pins |
| CON3-7 U7-6)) |
| (net DTR |
| (pins |
| CON3-4 U7-7)) |
| (net RI |
| (pins |
| CON3-9 U2-15)) |
| (net CTS |
| (pins |
| CON3-8 U2-13)) |
| (net DSR |
| (pins |
| CON3-6 U2-11)) |
| (net D4 |
| (pins |
| U7-2 CON1-6)) |
| (net D6 |
| (pins |
| CON1-8 U7-4)) |
| (net D7 |
| (pins |
| CON1-9 U7-5)) |
| (net D5 |
| (pins |
| U7-3 CON1-7)) |
| (net N21518 |
| (pins |
| U2-10 U2-12 U2-14 U2-16 D1-C C1-A)) |
| (net BA2_1 |
| (pins |
| CON1-14 U6-2)) |
| (net BA2_2 |
| (pins |
| U6-5 CON1-16)) |
| (net BA2_3 |
| (pins |
| CON1-17 U6-7)) |
| (net BA1_6 |
| (pins |
| CON1-10 U1-10)) |
| (net BA1_7 |
| (pins |
| CON1-11 U1-12)) |
| (net BA1_5 |
| (pins |
| U1-14 CON1-12)) |
| (net BA1_4 |
| (pins |
| U1-16 CON1-13)) |
| (net O2_0 |
| (pins |
| U6-16 CON4-14)) |
| (net O2_1 |
| (pins |
| U6-15 CON4-2)) |
| (net O2_2 |
| (pins |
| U6-12 CON4-16)) |
| (net O2_3 |
| (pins |
| U6-10 CON4-17)) |
| (net O0_0 |
| (pins |
| U6-14 CON4-15)) |
| (net O0_1 |
| (pins |
| U6-13 CON4-3)) |
| (net O0_2 |
| (pins |
| U6-11 CON4-4)) |
| (net O0_3 |
| (pins |
| U7-16 CON4-5)) |
| (net O0_4 |
| (pins |
| U7-15 CON4-18)) |
| (net O0_5 |
| (pins |
| U7-14 CON4-6)) |
| (net O0_6 |
| (pins |
| U7-13 CON4-19)) |
| (net O0_7 |
| (pins |
| U7-12 CON4-7)) |
| (net O_RTS |
| (pins |
| U7-11 CON4-20)) |
| (net O_DTR |
| (pins |
| U7-10 CON4-8)) |
| (net I1_4 |
| (pins |
| R4-2 CON4-10)) |
| (net I1_5 |
| (pins |
| R3-2 CON4-22)) |
| (net I1_6 |
| (pins |
| R1-2 CON4-21)) |
| (net I1_7 |
| (pins |
| R2-2 CON4-9)) |
| (net I1_3 |
| (pins |
| R11-2 CON4-23)) |
| (net I_DSR |
| (pins |
| R12-2 CON4-11)) |
| (net I_CTS |
| (pins |
| R13-2 CON4-24)) |
| (net I_RI |
| (pins |
| R14-2 CON4-12)) |
| (net BA1_3 |
| (pins |
| CON1-15 U2-9)) |
| (net TXD |
| (pins |
| D1-A CON3-3)) |
| (net N01853 |
| (pins |
| U1-7 R1-1)) |
| (net N01906 |
| (pins |
| U1-5 R2-1)) |
| (net N01959 |
| (pins |
| U1-3 R3-1)) |
| (net N02012 |
| (pins |
| U1-1 R4-1)) |
| (net N02164 |
| (pins |
| U2-7 R11-1)) |
| (net N02168 |
| (pins |
| U2-3 R13-1)) |
| (net N02134 |
| (pins |
| U2-5 R12-1)) |
| (net N02160 |
| (pins |
| U2-1 R14-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| U1-8 U2-2 U1-15 U6-8 U1-13 U2-6 U1-2 U1-9 U7-8 |
| U2-4 U1-6 U1-4 U1-11 U2-8 CON3-5 CON4-25 CON4-13 C1-C |
| J2-1 CON1-18 CON1-19 CON1-20 CON1-21 CON1-22 CON1-23 CON1-24 CON1-25)) |
| (net STROBE |
| (pins |
| U6-1 CON1-1)) |
| (net D0 |
| (pins |
| CON1-2 U6-3)) |
| (net D1 |
| (pins |
| U6-4 CON1-3)) |
| (net DCD |
| (pins |
| J3-1 CON3-1)) |
| (net D2 |
| (pins |
| CON1-4 U6-6)) |
| (net RXD |
| (pins |
| J3-2 CON3-2)) |
| (net D3 |
| (pins |
| CON1-5 U7-1)) |
| (net +12V |
| (property |
| (nettype S)) |
| (pins |
| U6-9 U7-9 CON4-1 J1-1))) |
| ) |
| /schemata/Motory/verze2/SPINACE.asc |
|---|
| 0,0 → 1,151 |
| *PADS-PCB* |
| *PART* |
| C1 ELYT@CE050X13 |
| CON1 DB25M@CANNON25M_90 |
| CON3 DB9F@CANNON9F_90 |
| CON4 DB25F@CANNON25F_90 |
| D1 D@DO41 |
| J1 JUMP1@JUMP1 |
| J2 JUMP1@JUMP1 |
| J3 JUMP2@JUMP2 |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 HOLE@HOLE_M3 |
| M5 HOLE@HOLE_M3 |
| M6 HOLE@HOLE_M3 |
| M7 HOLE@HOLE_M3 |
| R1 R@RL090 |
| R11 R@RL090 |
| R12 R@RL090 |
| R13 R@RL090 |
| R14 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| U1 DIP16@DIP16_300 |
| U2 DIP16@DIP16_300 |
| U6 DIP16@DIP16_300 |
| U7 DIP16@DIP16_300 |
| *NET* |
| *SIGNAL* RTS |
| CON3.7 U7.6 |
| *SIGNAL* DTR |
| CON3.4 U7.7 |
| *SIGNAL* RI |
| CON3.9 U2.15 |
| *SIGNAL* CTS |
| CON3.8 U2.13 |
| *SIGNAL* DSR |
| CON3.6 U2.11 |
| *SIGNAL* D4 |
| U7.2 CON1.6 |
| *SIGNAL* D6 |
| CON1.8 U7.4 |
| *SIGNAL* D7 |
| CON1.9 U7.5 |
| *SIGNAL* D5 |
| U7.3 CON1.7 |
| *SIGNAL* N21518 |
| U2.10 U2.12 U2.14 U2.16 D1.C C1.A |
| *SIGNAL* BA2_1 |
| CON1.14 U6.2 |
| *SIGNAL* BA2_2 |
| U6.5 CON1.16 |
| *SIGNAL* BA2_3 |
| CON1.17 U6.7 |
| *SIGNAL* BA1_6 |
| CON1.10 U1.10 |
| *SIGNAL* BA1_7 |
| CON1.11 U1.12 |
| *SIGNAL* BA1_5 |
| U1.14 CON1.12 |
| *SIGNAL* BA1_4 |
| U1.16 CON1.13 |
| *SIGNAL* O2_0 |
| U6.16 CON4.14 |
| *SIGNAL* O2_1 |
| U6.15 CON4.2 |
| *SIGNAL* O2_2 |
| U6.12 CON4.16 |
| *SIGNAL* O2_3 |
| U6.10 CON4.17 |
| *SIGNAL* O0_0 |
| U6.14 CON4.15 |
| *SIGNAL* O0_1 |
| U6.13 CON4.3 |
| *SIGNAL* O0_2 |
| U6.11 CON4.4 |
| *SIGNAL* O0_3 |
| U7.16 CON4.5 |
| *SIGNAL* O0_4 |
| U7.15 CON4.18 |
| *SIGNAL* O0_5 |
| U7.14 CON4.6 |
| *SIGNAL* O0_6 |
| U7.13 CON4.19 |
| *SIGNAL* O0_7 |
| U7.12 CON4.7 |
| *SIGNAL* O_RTS |
| U7.11 CON4.20 |
| *SIGNAL* O_DTR |
| U7.10 CON4.8 |
| *SIGNAL* I1_4 |
| R4.2 CON4.10 |
| *SIGNAL* I1_5 |
| R3.2 CON4.22 |
| *SIGNAL* I1_6 |
| R1.2 CON4.21 |
| *SIGNAL* I1_7 |
| R2.2 CON4.9 |
| *SIGNAL* I1_3 |
| R11.2 CON4.23 |
| *SIGNAL* I_DSR |
| R12.2 CON4.11 |
| *SIGNAL* I_CTS |
| R13.2 CON4.24 |
| *SIGNAL* I_RI |
| R14.2 CON4.12 |
| *SIGNAL* BA1_3 |
| CON1.15 U2.9 |
| *SIGNAL* TXD |
| D1.A CON3.3 |
| *SIGNAL* N01853 |
| U1.7 R1.1 |
| *SIGNAL* N01906 |
| U1.5 R2.1 |
| *SIGNAL* N01959 |
| U1.3 R3.1 |
| *SIGNAL* N02012 |
| U1.1 R4.1 |
| *SIGNAL* N02164 |
| U2.7 R11.1 |
| *SIGNAL* N02168 |
| U2.3 R13.1 |
| *SIGNAL* N02134 |
| U2.5 R12.1 |
| *SIGNAL* N02160 |
| U2.1 R14.1 |
| *SIGNAL* GND |
| U1.8 U2.2 U1.15 U6.8 U1.13 U2.6 U1.2 U1.9 |
| U7.8 U2.4 U1.6 U1.4 U1.11 U2.8 CON3.5 CON4.25 |
| CON4.13 C1.C J2.1 CON1.18 CON1.19 CON1.20 CON1.21 CON1.22 |
| CON1.23 CON1.24 CON1.25 |
| *SIGNAL* STROBE |
| U6.1 CON1.1 |
| *SIGNAL* D0 |
| CON1.2 U6.3 |
| *SIGNAL* D1 |
| U6.4 CON1.3 |
| *SIGNAL* DCD |
| J3.1 CON3.1 |
| *SIGNAL* D2 |
| CON1.4 U6.6 |
| *SIGNAL* RXD |
| J3.2 CON3.2 |
| *SIGNAL* D3 |
| CON1.5 U7.1 |
| *SIGNAL* +12V |
| U6.9 U7.9 CON4.1 J1.1 |
| *END* |
| /schemata/Motory/verze2/SPINACE.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/SPINACE01.eco |
|---|
| 0,0 → 1,15 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:18:27 2003 |
| *CHGPART* |
| CON4 DB25F@CANNON25F_90 DB25F@CANNON25F |
| CON1 DB25M@CANNON25M_90 DB25M@CANNON25M |
| CON3 DB9F@CANNON9F_90 DB9F@CANNON9F |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:38:47 2003 |
| *END* |
| /schemata/Motory/verze2/SPINACE01.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/SPINACE02.asc |
|---|
| 0,0 → 1,9604 |
| !PADS-POWERPCB-V5.0-BASIC! DESIGN DATABASE ASCII FILE 1.0 |
| *PCB* GENERAL PARAMETERS OF THE PCB DESIGN |
| UNITS 0 2=Inches 1=Metric 0=Mils |
| USERGRID 381000 381000 Space between USER grid points |
| MAXIMUMLAYER 2 Maximum routing layer |
| WORKLEVEL 1 Level items will be created on |
| DISPLAYLEVEL 1 toggle for displaying working level last |
| LAYERPAIR 1 2 Layer pair used to route connection |
| VIAMODE T Type of via to use when routing between layers |
| LINEWIDTH 381000 Width items will be created with |
| TEXTSIZE 3810000 381000 Height and LineWidth text will be created with |
| JOBTIME 154 Amount of time spent on this PCB design |
| DOTGRID 38100000 38100000 Space between graphic dots |
| SCALE 9.745 Scale of window expansion |
| ORIGIN 381000000 381000000 User defined origin location |
| WINDOWCENTER 480140111 491602242 Point defining the center of the window |
| BACKUPTIME 20 Number of minutes between database backups |
| REAL WIDTH 381000 Widths greater then this are displayed real size |
| ALLSIGONOFF 1 All signal nets displayed on/off |
| REFNAMESIZE 3810000 381000 Height and LineWidth used by part ref. names |
| HIGHLIGHT 0 Highlight nets flag |
| JOBNAME SPINACE02.pcb |
| CONCOL 1 |
| FBGCOL 1 0 |
| HATCHGRID 381000 Copper pour hatching grid |
| TEARDROP 2713690 Teardrop tracks |
| THERLINEWID 571500 Copper pour thermal line width |
| PSVIAGRID 381000 381000 Push & Shove Via Grid |
| PADFILLWID 381000 CAM finger pad fill width |
| THERSMDWID 381000 Copper pour thermal line width for SMD |
| MINHATAREA 0 Minimum hatch area |
| HATCHMODE 0 Hatch generation mode |
| HATCHDISP 0 Hatch display flag |
| DRILLHOLE 228600 Drill hole checking spacing |
| MITRERADII 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |
| MITRETYPE 1 Mitring type |
| HATCHRAD 1.000000 Hatch outline smoothing radius |
| MITREANG 180 180 180 180 180 180 90 |
| HATCHANG 0 Hatch angle |
| THERFLAGS 0 Copper pour thermal line flags |
| DRLOVERSIZE 114300 Drill oversize for plated holes |
| PLANERAD 0.000000 Plane outline smoothing radius |
| PLANEFLAGS OUTLINE THERMALS Y Y Y N N Y Y Y N N Y Y N Y Y N N Plane and Test Points flags |
| COMPHEIGHT 0 Board Top Component Height Restriction |
| KPTHATCHGRID 3810000 Copper pour hatching grid |
| BOTCMPHEIGHT 0 Board Bottom Component Height Restriction |
| FANOUTGRID 952500 952500 Fanout grid |
| FANOUTLENGTH 9525000 Maximum fanout length |
| ROUTERFLAGS 83879441 Autorouter specific flags |
| VERIFYFLAGS 1861 Verify Design flags |
| FABCHKFLAGS 3967 Fabrication checks flags |
| ATMAXSIZE 114300 Acid Traps Maximum Size |
| ATMAXANGLE 161999820 Acid Traps Maximum Angle |
| SLMINCOPPER 114300 Slivers Minimum Copper |
| SLMINMASK 114300 Slivers Minimum Mask |
| STMINCLEAR 5 Starved Thermal Minimum Clearance |
| STMINSPOKES 4 Starved Thermal Minimum Spokes |
| TPMINWIDTH 114300 Minimum Trace Width |
| TPMINSIZE 114300 Mimimum Pad Size |
| SSMINGAP 114300 Silk Screen Over Pads Minimum Gap |
| SBMINGAP 114300 Solder Bridges Minimum Gap |
| SBLAYER 1 Solder Bridges Layer |
| ARPTOM 114300 Pad To Mask Annular Ring |
| ARPTOMLAYER 1 Pad To Mask Annular Ring Layer |
| ARDTOM 114300 Drill To Mask Annular Ring |
| ARDTOMLAYER 1 Drill To Mask Annular Ring Layer |
| ARDTOP 114300 Drill To Pad Annular Ring |
| ARDTOPLAYER 0 Drill To Pad Annular Ring Layer |
| PLNSEPGAP 228600 Plane separation gap |
| IDFSHAPELAY 0 IDF shapes layer |
| TEARDROPDATA 90 90 |
| *REUSE* |
| *REMARK* TYPE TYPENAME |
| *REMARK* TIMESTAMP SECONDS |
| *REMARK* PART NAMING PARTNAMING |
| *REMARK* PART NAME |
| *REMARK* NET NAMING NETNAMING |
| *REMARK* NET MERGE NAME |
| *REMARK* REUSE INSTANCENM PARTNAMING NETNAMING X Y ORI GLUED |
| *TEXT* FREE TEXT |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST .REUSE. INSTANCENM |
| *LINES* LINES ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES TEXT SIGSTR |
| *REMARK* .REUSE. INSTANCE RSIGNAL |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| DRW83515280 BOARD 7620000 114300000 1 |
| CLOSED 5 381000 0 |
| 0 3048000 |
| 153924000 3048000 |
| 153924000 -106680000 |
| 0 -106680000 |
| 0 3048000 |
| DIM98152102 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 2048 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 2048 |
| -153924000 0 |
| -153923000 0 |
| ARWLN1 2 381000 24 2048 |
| 0 -15240000 |
| -69324682 -15240000 |
| ARWHD1 4 381000 24 2048 |
| 0 -15240000 |
| -3810000 -16192500 |
| -3810000 -14287500 |
| 0 -15240000 |
| ARWLN2 2 381000 24 2048 |
| -153924000 -15240000 |
| -84599318 -15240000 |
| ARWHD2 4 381000 24 2048 |
| -153924000 -15240000 |
| -150114000 -14287500 |
| -150114000 -16192500 |
| -153924000 -15240000 |
| EXTLN1 2 381000 24 2048 |
| 0 -1905000 |
| 0 -17145000 |
| EXTLN2 2 381000 24 2048 |
| -153924000 -1905000 |
| -153924000 -17145000 |
| -83456318 -16668750 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 102.6mm |
| DIM58176572 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 4096 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 4096 |
| 0 109728000 |
| 1000 109728000 |
| ARWLN1 2 381000 24 4096 |
| 20955000 0 |
| 20955000 52292250 |
| ARWHD1 4 381000 24 4096 |
| 20955000 0 |
| 20002500 3810000 |
| 21907500 3810000 |
| 20955000 0 |
| ARWLN2 2 381000 24 4096 |
| 20955000 109728000 |
| 20955000 57435750 |
| ARWHD2 4 381000 24 4096 |
| 20955000 109728000 |
| 21907500 105918000 |
| 20002500 105918000 |
| 20955000 109728000 |
| EXTLN1 2 381000 24 4096 |
| 1905000 0 |
| 22860000 0 |
| EXTLN2 2 381000 24 4096 |
| 1905000 109728000 |
| 22860000 109728000 |
| 15023523 53435250 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 73.2mm |
| *CLUSTER* ITEMS |
| *REMARK* NAME XLOC YLOC PARENTID CLUSTERID CHILD_NUM ATTRIBUTE ATT2 BROID |
| *VIA* ITEMS |
| *REMARK* NAME DRILL STACKLINES [DRILL START] [DRILL END] |
| *REMARK* LEVEL SIZE SHAPE [INNER DIAMETER] |
| JMPVIA_AAAAB 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| JMPVIA_AAAAA 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| STANDARDVIA 1409700 3 |
| -2 2095500 R |
| -1 2095500 R |
| 0 2095500 R |
| *JUMPER* |
| *REMARK* NAME FLAGS MINLEN MAXLEN LENINCR LABELS PADSTACKS |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| JMP1 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| JMP2 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| *PARTDECAL* ITEMS |
| *REMARK* NAME ORIX ORIY PIECES TERMINALS STACKS TEXT LABELS |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* PIECETYPE CORNERS WIDTH LEVEL PINNUM |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* T XLOC YLOC NMXLOC NMYLOC |
| *REMARK* PAD PIN STACKLINES |
| *REMARK* LEVEL SIZE SHAPE IDIA DRILL [PLATED] |
| *REMARK* LEVEL SIZE SHAPE FINORI FINLENGTH FINOFFSET DRILL [PLATED] |
| ELYTA I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1028700 1676400 |
| -3864408 1676400 |
| -4169208 1371600 |
| -4169208 -1371600 |
| -3864408 -1676400 |
| -1028700 -1676400 |
| OPEN 4 300000 0 |
| 1028700 1676400 |
| 4076700 1676400 |
| 4076700 -1676400 |
| 1028700 -1676400 |
| -5528803 -670722 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2118500 2430789 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -1990311 6609732 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2400300 0 -2512500 -600000 |
| T2400300 0 2107500 -585000 |
| PAD 0 5 |
| -2 2476500 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 2705100 S |
| 23 2324100 S |
| ELYTB I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1333500 2362200 |
| -3619500 2362200 |
| -3924300 2057400 |
| -3924300 -2057400 |
| -3619500 -2362200 |
| -1333500 -2362200 |
| OPEN 4 300000 0 |
| 1333500 2362200 |
| 3924300 2362200 |
| 3924300 -2362200 |
| 1333500 -2362200 |
| -5232429 -592116 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2274039 10133936 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2274039 6015735 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2476500 0 -2588700 -600000 |
| T2476500 0 2183700 -585000 |
| PAD 0 5 |
| -2 2095500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 2324100 RF 90.000 4038600 0 |
| 23 1943100 RF 90.000 3657600 0 |
| ELYTC I 0 0 2 2 1 2 2 |
| OPEN 6 300000 0 |
| -2095500 2667000 |
| -5524500 2667000 |
| -5829300 2377937 |
| -5829300 -2358906 |
| -5524500 -2667000 |
| -2095500 -2667000 |
| OPEN 4 300000 0 |
| 2095500 2667000 |
| 5829300 2667000 |
| 5829300 -2667000 |
| 2095500 -2667000 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -7281389 -522186 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2345177 3367048 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2475293 7574104 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-3810000 0 -3922200 -600000 |
| T3810000 0 3517200 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4038600 0 |
| 23 3086100 RF 90.000 3657600 0 |
| ELYTD I 0 0 2 2 1 2 2 |
| OPEN 6 299847 0 |
| -3048000 3505200 |
| -6477000 3505200 |
| -6858000 3124200 |
| -6858000 -3124200 |
| -6477000 -3505200 |
| -2971800 -3505200 |
| OPEN 4 300000 0 |
| 3048000 3505200 |
| 6858000 3505200 |
| 6858000 -3505200 |
| 3048000 -3505200 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -8302901 -620739 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2122481 4358106 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2170638 8692198 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-4800600 0 -4912800 -600000 |
| T4800600 0 4507800 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 4572000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4800600 0 |
| 23 3086100 RF 90.000 4419600 0 |
| CE020X5 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4000500 0 |
| -4000500 0 |
| -5257847 -629938 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE025X6 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4953000 0 |
| -4953000 0 |
| -6430981 -671836 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 6477000 0 |
| -6477000 0 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 8001000 0 |
| -8001000 0 |
| -9946160 -766682 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X13 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 10287000 0 |
| -10287000 0 |
| -12356954 -891778 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE075X16 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 12382500 0 |
| -12382500 0 |
| -14624835 -1147354 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2731444 18839171 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2449944 13490664 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1714500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE075X18 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 13982700 0 |
| -13982700 0 |
| -16300121 -922964 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2234097 14901313 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| VALUE -2157651 20558301 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1524000 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE020X5/L I 0 0 3 2 2 1 2 |
| CLOSED 5 299847 0 |
| -4000500 -2286000 |
| 3848100 -2286000 |
| 3848100 -18554700 |
| -4000500 -18554700 |
| -4000500 -2286000 |
| OPEN 2 299847 0 |
| -1409700 -1524000 |
| -1409700 -2286000 |
| OPEN 2 299847 0 |
| 1524000 -1524000 |
| 1524000 -2286000 |
| -4000500 -838200 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CE025X6/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -4914900 -2286000 |
| 4914900 -2286000 |
| 4914900 -18478500 |
| -4914900 -18478500 |
| -4914900 -2286000 |
| OPEN 3 300000 0 |
| -1828800 -1524000 |
| -1866900 -2286000 |
| -1943100 -2247900 |
| OPEN 2 300000 0 |
| 1905000 -1524000 |
| 1905000 -2286000 |
| -4648200 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -6400800 -2286000 |
| 6438900 -2286000 |
| 6438900 -18554700 |
| -6400800 -18554700 |
| -6400800 -2286000 |
| OPEN 2 300000 0 |
| -2590800 -1524000 |
| -2590800 -2286000 |
| OPEN 2 300000 0 |
| 2705100 -1524000 |
| 2705100 -2286000 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -8001000 -2667000 |
| 7924800 -2667000 |
| 7924800 -25984200 |
| -8001000 -25984200 |
| -8001000 -2667000 |
| OPEN 2 300000 0 |
| -3810000 -1524000 |
| -3810000 -2667000 |
| OPEN 2 300000 0 |
| 3810000 -1524000 |
| 3810000 -2667000 |
| -6591300 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CANNON25M M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 1 |
| -26670000 -3048000 |
| -26670000 3467100 |
| 26670000 3467100 |
| 26670000 -3238500 |
| -2819400 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1905000 8229600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1828800 4305300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 0 -24750000 0 |
| T-20625000 0 -20625000 0 |
| T-16500000 0 -16500000 0 |
| T-12375000 0 -12375000 0 |
| T-8250000 0 -8250000 0 |
| T-4125000 0 -4125000 0 |
| T0 0 0 0 |
| T4125000 0 4125000 0 |
| T8250000 0 8250000 0 |
| T12375000 0 12375000 0 |
| T16500000 0 16500000 0 |
| T20625000 0 20625000 0 |
| T24750000 0 24750000 0 |
| T-22687500 0 -22687500 0 |
| T-18562500 0 -18562500 0 |
| T-14437500 0 -14437500 0 |
| T-10312500 0 -10312500 0 |
| T-6187500 0 -6187500 0 |
| T-2062500 0 -2062500 0 |
| T2062500 0 2062500 0 |
| T6187500 0 6187500 0 |
| T10312500 0 10312500 0 |
| T14437500 0 14437500 0 |
| T18562500 0 18562500 0 |
| T22687500 0 22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| CANNON9F M 8520000 -2130000 1 11 3 1 2 |
| CLOSED 5 300000 0 |
| -23400000 9450000 |
| 23400000 9450000 |
| 23400000 -9450000 |
| -23400000 -9450000 |
| -23400000 9450000 |
| -2445000 -7365000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -4725000 14160000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -4650000 10275000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90 M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -13500000 |
| -23400000 -13500000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -13500000 |
| -13200000 -23400000 |
| 13200000 -23400000 |
| 13200000 -13500000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90/L M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -17100000 |
| -23400000 -17100000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -17100000 |
| -13200000 -27300000 |
| 13200000 -27300000 |
| 13200000 -17100000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F/T I 8520000 -2130000 1 11 8 1 2 |
| OPEN 4 300000 1 |
| -10668000 -3048000 |
| -10668000 3810000 |
| 10668000 3810000 |
| 10668000 -3048000 |
| -3467100 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1866900 8572500 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1866900 4533900 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10934700 381000 -10934700 381000 |
| T10706100 -38100 10706100 -38100 |
| PAD 0 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 1 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 2 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 3 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 4 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 5 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 10 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| PAD 11 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| CANNON25F M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T24750000 1905000 24750000 1905000 |
| T20625000 1905000 20625000 1905000 |
| T16500000 1905000 16500000 1905000 |
| T12375000 1905000 12375000 1905000 |
| T8250000 1905000 8250000 1905000 |
| T4125000 1905000 4125000 1905000 |
| T0 1905000 0 1905000 |
| T-4125000 1905000 -4125000 1905000 |
| T-8250000 1905000 -8250000 1905000 |
| T-12375000 1905000 -12375000 1905000 |
| T-16500000 1905000 -16500000 1905000 |
| T-20625000 1905000 -20625000 1905000 |
| T-24750000 1905000 -24750000 1905000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 0 |
| -26670000 -3048000 |
| -26670000 3581400 |
| 26670000 3581400 |
| 26670000 -3048000 |
| -2971800 -5905500 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2133600 4610100 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2324100 8610600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 0 24750000 0 |
| T20625000 0 20625000 0 |
| T16500000 0 16500000 0 |
| T12375000 0 12375000 0 |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T-12375000 0 -12375000 0 |
| T-16500000 0 -16500000 0 |
| T-20625000 0 -20625000 0 |
| T-24750000 0 -24750000 0 |
| T22687500 0 22687500 0 |
| T18562500 0 18562500 0 |
| T14437500 0 14437500 0 |
| T10312500 0 10312500 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10312500 0 -10312500 0 |
| T-14437500 0 -14437500 0 |
| T-18562500 0 -18562500 0 |
| T-22687500 0 -22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| SOD87 I 0 0 2 2 1 1 2 |
| OPEN 4 304800 0 |
| 1333500 1524000 |
| 3429000 1524000 |
| 3429000 -1524000 |
| 1333500 -1524000 |
| OPEN 6 304800 0 |
| -1333500 1524000 |
| -3124200 1524000 |
| -3505200 1219200 |
| -3505200 -1219200 |
| -3124200 -1524000 |
| -1333500 -1524000 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -2019300 2247900 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2057400 6515100 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2286000 0 -2438400 -495300 |
| T2286000 0 1981200 -571500 |
| PAD 0 5 |
| -2 1524000 RF 90.000 2286000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1752600 RF 90.000 2514600 0 |
| 23 1371600 RF 90.000 2133600 0 |
| DO201 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -7050000 2400000 |
| -5550000 3900000 |
| 7050000 3900000 |
| 7050000 -3900000 |
| -5550000 -3900000 |
| -7050000 -2400000 |
| -7050000 2400000 |
| OPEN 2 300000 0 |
| -5448300 3886200 |
| -5448300 -3886200 |
| OPEN 2 304800 1 |
| -7050000 0 |
| -8250000 0 |
| OPEN 2 304800 1 |
| 7050000 0 |
| 8250000 0 |
| -9486900 2819400 0.000 26 3000000 300000 N LEFT DOWN 0 |
| K |
| VALUE -2895600 4762500 0.000 1 3000000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -3276600 10096500 0.000 1 3000000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 3924300 R 1981200 |
| -1 3924300 R |
| 0 3924300 R |
| 21 4152900 R |
| 28 4152900 R |
| DO41 M 0 0 2 2 1 1 2 |
| CLOSED 7 300000 0 |
| -5250000 1500000 |
| -4500000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -4500000 -2250000 |
| -5250000 -1500000 |
| -5250000 1500000 |
| OPEN 2 300000 0 |
| -4457700 2247900 |
| -4457700 -2171700 |
| -6019800 -3505200 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| MELF I 0 0 2 2 1 2 2 |
| OPEN 6 304800 0 |
| -2667000 2400300 |
| -4762500 2400300 |
| -5143500 2019300 |
| -5143500 -2019300 |
| -4762500 -2400300 |
| -2667000 -2400300 |
| OPEN 4 304800 0 |
| 2667000 2400300 |
| 5143500 2400300 |
| 5143500 -2400300 |
| 2667000 -2400300 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -6705600 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| ¨K |
| VALUE -1981200 10591800 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2057400 4876800 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3733800 0 -3886200 -495300 |
| T3733800 0 3429000 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 4000500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 4229100 0 |
| 23 1752600 RF 90.000 3848100 0 |
| MINIMELF I 0 0 2 2 1 1 2 |
| OPEN 6 304800 0 |
| -1524000 1905000 |
| -3810000 1905000 |
| -4114800 1600200 |
| -4114800 -1600200 |
| -3810000 -1905000 |
| -1524000 -1905000 |
| OPEN 4 304800 0 |
| 1524000 1905000 |
| 4000500 1905000 |
| 4000500 -1905000 |
| 1524000 -1905000 |
| -5372100 -914400 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -1943100 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2095500 2476500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2781300 -495300 |
| T2628900 0 2324100 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 2857500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 3086100 0 |
| 23 1752600 RF 90.000 2705100 0 |
| DO35 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -2250000 1050000 |
| -1800000 1500000 |
| 2250000 1500000 |
| 2250000 -1500000 |
| -1800000 -1500000 |
| -2250000 -1050000 |
| -2250000 1050000 |
| OPEN 2 300000 0 |
| -1524000 1485900 |
| -1524000 -1409700 |
| OPEN 2 304800 1 |
| -2250000 0 |
| -3300000 0 |
| OPEN 2 304800 1 |
| 2250000 0 |
| 3300000 0 |
| -3750000 1500000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1790700 5981700 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1981200 2019300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-4762500 0 -4912500 -600000 |
| T4762500 0 4462500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| DS040 M 0 0 2 2 1 1 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| OPEN 2 300000 0 |
| 1524000 0 |
| -1524000 0 |
| -5181600 -723900 0.000 26 2250000 300000 N LEFT DOWN 0 |
| K |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| TO220AC M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 2925000 -8175000 |
| -4575000 -8175000 |
| -4575000 8325000 |
| 2925000 8325000 |
| 2925000 -8175000 |
| OPEN 2 1200000 0 |
| -4575000 -7725000 |
| -4575000 7875000 |
| -240000 -7170000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -3000000 9450000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2925000 13575000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-75000 3885000 -417900 3389700 |
| T-75000 -3735000 -303600 -4268400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| TO220AB M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 3000000 -8250000 |
| -4500000 -8250000 |
| -4500000 8250000 |
| 3000000 8250000 |
| 3000000 -8250000 |
| OPEN 2 1200000 0 |
| -4500000 -7800000 |
| -4500000 7800000 |
| -190500 -5143500 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -2400000 13425000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2775000 9300000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T0 1905000 -342900 1409700 |
| T0 -1905000 -228600 -2438400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| JUMP1 I 0 0 1 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -1905000 |
| -1905000 -1905000 |
| -1905000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP1_90 I 0 0 2 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -6096000 |
| -1905000 -6096000 |
| -1905000 1905000 |
| OPEN 2 300000 0 |
| -1905000 -1905000 |
| 1905000 -1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -1905000 |
| -3810000 -1905000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2_90 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -6096000 |
| -3810000 -6096000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| ARK050X2 M 3810000 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -7500000 6750000 |
| 7500000 6750000 |
| 7500000 -6750000 |
| -7500000 -6750000 |
| -7500000 6750000 |
| VALUE -2250000 7500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 11250000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -4038600 -495300 |
| T3810000 0 3810000 0 |
| PAD 0 5 |
| -2 2857500 S 1524000 |
| -1 2857500 S |
| 0 2857500 S |
| 21 3086100 S |
| 28 3086100 S |
| PAD 2 5 |
| -2 2857500 R 1524000 |
| -1 2857500 R |
| 0 2857500 R |
| 21 3086100 R |
| 28 3086100 R |
| CROSS I 0 0 10 1 1 0 2 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 190500 |
| OPEN 2 266700 0 |
| 0 0 |
| 190500 0 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 -190500 |
| OPEN 2 266700 0 |
| 0 0 |
| -190500 0 |
| OPEN 2 266700 0 |
| 571500 0 |
| 2476500 0 |
| OPEN 2 266700 0 |
| 0 -571500 |
| 0 -1866900 |
| OPEN 2 266700 0 |
| 0 571500 |
| 0 2286000 |
| OPEN 2 266700 0 |
| -2286000 0 |
| -571500 0 |
| CIRCLE 2 266700 0 |
| 0 -1143000 |
| 0 1143000 |
| CIRCLE 2 266700 0 |
| 0 -762000 |
| 0 762000 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 3 |
| -2 0 R 76200 |
| -1 0 R |
| 0 0 R |
| HOLE_M3 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 9000000 R 4800000 |
| -1 9000000 R |
| 0 9000000 R |
| 21 9225000 R |
| 28 9225000 R |
| HOLE_M4 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 13500000 R 6300000 |
| -1 13500000 R |
| 0 13500000 R |
| 21 13725000 R |
| 28 13725000 R |
| HOLE_M2 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| T0 0 0 0 |
| PAD 0 5 |
| -2 6750000 R 3150000 |
| -1 6750000 R |
| 0 6750000 R |
| 21 6975000 R |
| 28 6975000 R |
| R0805 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -609600 1333500 |
| -2590800 1333500 |
| -2590800 -1333500 |
| -609600 -1333500 |
| OPEN 4 304800 0 |
| 609600 1333500 |
| 2590800 1333500 |
| 2590800 -1333500 |
| 609600 -1333500 |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-1447800 0 -1333500 -571500 |
| T1447800 0 1481570 -571500 |
| PAD 0 5 |
| -2 1485900 RF 90.000 1943100 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1714500 RF 90.000 2171700 0 |
| 23 1333500 RF 90.000 1790700 0 |
| R0603 I 0 0 2 2 1 0 2 |
| OPEN 4 300000 0 |
| -457200 1143000 |
| -2209800 1143000 |
| -2209800 -1143000 |
| -457200 -1143000 |
| OPEN 4 300000 0 |
| 457200 1143000 |
| 2209800 1143000 |
| 2209800 -1143000 |
| 457200 -1143000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-1143000 0 -1333500 -571500 |
| T1143000 0 838200 -571500 |
| PAD 0 5 |
| -2 1333500 RF 90.000 1524000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1562100 RF 90.000 1752600 0 |
| 23 1181100 RF 90.000 1371600 0 |
| R1206 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1295400 1714500 |
| -3429000 1714500 |
| -3429000 -1714500 |
| -1295400 -1714500 |
| OPEN 4 304800 0 |
| 1295400 1714500 |
| 3429000 1714500 |
| 3429000 -1714500 |
| 1295400 -1714500 |
| VALUE -2247900 2324100 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2171700 0 -2283900 -600000 |
| T2171700 0 1878900 -585000 |
| PAD 0 5 |
| -2 1638300 RF 90.000 2667000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1866900 RF 90.000 2895600 0 |
| 23 1409700 RF 90.000 2514600 0 |
| RS025 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 495000 0 |
| -4305000 0 |
| VALUE -2250000 2700000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 6600000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2055000 -600000 |
| T1905000 0 1605000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL090 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -5250000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -5250000 -2250000 |
| -5250000 2250000 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL140 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -9000000 3450000 |
| 9000000 3450000 |
| 9000000 -3450000 |
| -9000000 -3450000 |
| -9000000 3450000 |
| VALUE -1800000 4050000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1950000 8100000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RS040 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| R1812 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1905000 3048000 |
| -4876800 3048000 |
| -4876800 -3048000 |
| -1905000 -3048000 |
| OPEN 4 304800 0 |
| 1905000 3048000 |
| 4876800 3048000 |
| 4876800 -3048000 |
| 1905000 -3048000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2171700 6286500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3543300 0 -3429000 -571500 |
| T3543300 0 3577070 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 5334000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2095500 RF 90.000 5524500 0 |
| 23 1714500 RF 90.000 5181600 0 |
| DIP16_300 I 0 0 1 16 2 0 2 |
| CLOSED 9 300000 0 |
| -3810000 15240000 |
| -1143000 15240000 |
| -1143000 12954000 |
| 1143000 12954000 |
| 1143000 15240000 |
| 3810000 15240000 |
| 3810000 -15240000 |
| -3810000 -15240000 |
| -3810000 15240000 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| T-5715000 13335000 -5715000 13335000 |
| T-5715000 9525000 -5715000 9525000 |
| T-5715000 5715000 -5715000 5715000 |
| T-5715000 1905000 -5715000 1905000 |
| T-5715000 -1905000 -5715000 -1905000 |
| T-5715000 -5715000 -5715000 -5715000 |
| T-5715000 -9525000 -5715000 -9525000 |
| T-5715000 -13335000 -5715000 -13335000 |
| T5715000 -13335000 5715000 -13335000 |
| T5715000 -9525000 5715000 -9525000 |
| T5715000 -5715000 5715000 -5715000 |
| T5715000 -1905000 5715000 -1905000 |
| T5715000 1905000 5715000 1905000 |
| T5715000 5715000 5715000 5715000 |
| T5715000 9525000 5715000 9525000 |
| T5715000 13335000 5715000 13335000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2514600 R |
| 28 2514600 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2514600 S |
| 28 2514600 S |
| *PARTTYPE* ITEMS |
| *REMARK* NAME DECALNM UNITS TYPE GATES SIGPINS PINNMS FLAGS ECO |
| *REMARK* G/S SWAPTYPE PINS |
| *REMARK* PIN.SWAPTYPE.PINTYPE.FUNCNAME |
| *REMARK* SIGPIN PIN WIDTH SIGNAME |
| ELYT ELYTA:ELYTB:ELYTC:ELYTD:CE020X5:CE025X6:CE035X8:CE050X10:CE050X13:CE075X16:CE075X18:CE020X5/L:CE025X6/L:CE035X8/L:CE050X10/L I CAP 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| A C |
| DB25M CANNON25M:CANNON25M_90:CANNON25M_90/L:CANNON25M/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| DB9F CANNON9F:CANNON9F_90:CANNON9F_90/L:CANNON9F/T I CON 1 0 0 0 Y |
| G 0 11 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U |
| DB25F CANNON25F:CANNON25F_90:CANNON25F_90/L:CANNON25F/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| D SOD87:DO201:DO41:MELF:MINIMELF:DO35:DS040:TO220AC:TO220AB I DIO 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| C A |
| JUMP1 JUMP1:JUMP1_90 I CON 1 0 0 0 Y |
| G 0 1 |
| 1.0.Z |
| JUMP2 JUMP2:JUMP2_90:ARK050X2 I CON 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| CROSS CROSS I MEC 0 0 0 0 Y |
| HOLE HOLE_M3:HOLE_M4:HOLE_M2 I MEC 0 0 0 0 Y |
| R R0805:R0603:R1206:RS025:RL090:RL140:RS040:R1812 I RES 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| DIP16 DIP16_300 I DIP 1 0 0 0 Y |
| G 0 16 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U |
| *PART* ITEMS |
| *REMARK* REFNM PTYPENM X Y ORI GLUE MIRROR ALT CLSTID CLSTATTR BROTHERID LABELS |
| *REMARK* .REUSE. INSTANCE RPART |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| C1 ELYT 128016000 103632000 270.000 U N 8 -1 0 -1 2 |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| CON1 DB25M 147447000 62484000 90.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| CON3 DB9F 53721000 103632000 180.000 U N 1 -1 0 -1 2 |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| CON4 DB25F 21717000 62484000 270.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| D1 D 81534000 99822000 270.000 U N 2 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J1 JUMP1 105003600 39319200 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J2 JUMP1 105270300 28041600 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J3 JUMP2 47244000 94107000 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| M1 CROSS 3810000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M2 CROSS 167640000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M3 CROSS 167640000 121920000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M4 HOLE 16764000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M5 HOLE 152400000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M6 HOLE 152400000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M7 HOLE 16764000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| R1 R 98298000 60960000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R11 R 71628000 68580000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R12 R 71628000 74676000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R13 R 71628000 80772000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R14 R 71628000 86868000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R2 R 98298000 66294000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R3 R 98298000 71628000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R4 R 98298000 76962000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| U1 DIP16 127673100 71475600 0.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U2 DIP16 100584000 99822000 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U6 DIP16 47510700 29908500 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U7 DIP16 80543400 30175200 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| *ROUTE* |
| *REMARK* *SIGNAL* SIGNAME SIGFLAG COLOR |
| *REMARK* REFNM.PIN .REUSE. INSTANCE RSIG REFNM.PIN .REUSE. INSTANCE RSIG |
| *REMARK* XLOC YLOC LAYER SEGMENTWIDTH FLAGS [ARCDIR/VIANAME] [TEARDROP [P WID LEN [FLAGS]] [N WID LEN [FLAGS]]] [JMPNM JMPFLAG] REUSE INST RSIG |
| *SIGNAL* RTS 0 -2 |
| CON3.7 U7.6 |
| 51658500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 51658500 98074500 1 609600 1536 |
| 55626000 94107000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP1 S |
| 118872000 43434000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 116141280 40703280 1 609600 3584 |
| 116141280 34925345 1 609600 3584 |
| 102856735 21640800 1 609600 3584 |
| 89077800 21640800 1 609600 3584 |
| 86258400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DTR 0 -2 |
| CON3.4 U7.7 |
| 57846000 101502000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 60837528 98510472 1 609600 1536 |
| 60837528 98420472 1 609600 1536 |
| 63627000 95631000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP2 E |
| 113538000 42672000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 113538000 33722985 1 609600 3584 |
| 102446415 22631400 1 609600 3584 |
| 91897200 22631400 1 609600 3584 |
| 90068400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RI 0 -2 |
| CON3.9 U2.15 |
| 59908500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62906700 105762000 1 609600 1536 |
| 70104000 98564700 1 609600 1536 |
| 78714600 98564700 1 609600 1536 |
| 80962500 100812600 1 609600 1536 |
| 86525100 100812600 1 609600 1536 |
| 91059000 105346500 1 609600 1536 |
| 91059000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* CTS 0 -2 |
| CON3.8 U2.13 |
| 55783500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55783500 107632498 1 609600 1536 |
| 57498002 109347000 1 609600 1536 |
| 94869000 109347000 1 609600 1536 |
| 98679000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DSR 0 -2 |
| CON3.6 U2.11 |
| 47533500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52109100 110337600 1 609600 1536 |
| 101498400 110337600 1 609600 1536 |
| 106299000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D4 0 -2 |
| U7.2 CON1.6 |
| 71018400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 77800200 17678400 1 609600 1536 |
| 104636400 17678400 1 609600 1536 |
| 145317000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D6 0 -2 |
| CON1.8 U7.4 |
| 145317000 66609000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139257300 60549300 1 609600 1536 |
| 139257300 55239525 1 609600 1536 |
| 103677375 19659600 1 609600 1536 |
| 83439000 19659600 1 609600 1536 |
| 78638400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D7 0 -2 |
| CON1.9 U7.5 |
| 145317000 70734000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138266700 63683700 1 609600 1536 |
| 138266700 55649845 1 609600 1536 |
| 103267055 20650200 1 609600 1536 |
| 86258400 20650200 1 609600 1536 |
| 82448400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D5 0 -2 |
| U7.3 CON1.7 |
| 74828400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80619600 18669000 1 609600 1536 |
| 104087695 18669000 1 609600 1536 |
| 140247900 54829205 1 609600 1536 |
| 140247900 57414900 1 609600 1536 |
| 145317000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N21518 0 -2 |
| D1.C U2.16 |
| 81534000 106489500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 83896200 106489500 1 609600 1536 |
| 84848700 105537000 1 609600 1536 |
| 87249000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.16 U2.14 |
| 87249000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87249000 107213398 1 609600 1536 |
| 88392002 108356400 1 609600 1536 |
| 93725998 108356400 1 609600 1536 |
| 94869000 107213398 1 609600 1536 |
| 94869000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.14 U2.12 |
| 94869000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 96697800 103708200 1 609600 1536 |
| 100660200 103708200 1 609600 1536 |
| 102489000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.12 U2.10 |
| 102489000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 104317800 103708200 1 609600 1536 |
| 108280200 103708200 1 609600 1536 |
| 110109000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.10 C1.A |
| 110109000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 111937800 103708200 1 609600 1536 |
| 120396000 103708200 1 609600 1536 |
| 124129800 107442000 1 609600 1536 |
| 128016000 107442000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_1 0 -2 |
| CON1.14 U6.2 |
| 149577000 39796500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 39796500 1 609600 1536 |
| 114175259 10744200 1 609600 1536 |
| 51435000 10744200 1 609600 1536 |
| 37985700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_2 0 -2 |
| U6.5 CON1.16 |
| 49415700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 59893200 13716000 1 609600 1536 |
| 108235479 13716000 1 609600 1536 |
| 142565979 48046500 1 609600 1536 |
| 149577000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_3 0 -2 |
| CON1.17 U6.7 |
| 149577000 52171500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143889139 52171500 1 609600 1536 |
| 107414839 15697200 1 609600 1536 |
| 65532000 15697200 1 609600 1536 |
| 57035700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_6 0 -2 |
| CON1.10 U1.10 |
| 145317000 74859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139293600 68835600 1 609600 1536 |
| 139293600 67856100 1 609600 1536 |
| 133388100 61950600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_7 0 -2 |
| CON1.11 U1.12 |
| 145317000 78984000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143485500 77152500 1 609600 1536 |
| 140970000 77152500 1 609600 1536 |
| 133388100 69570600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_5 0 -2 |
| U1.14 CON1.12 |
| 133388100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 136283700 80086200 1 609600 1536 |
| 142294200 80086200 1 609600 1536 |
| 145317000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_4 0 -2 |
| U1.16 CON1.13 |
| 133388100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138036300 84810600 1 609600 1536 |
| 140459700 87234000 1 609600 1536 |
| 145317000 87234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_0 0 -2 |
| U6.16 CON4.14 |
| 34175700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 30002700 39796500 1 609600 1536 |
| 19587000 39796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_1 0 -2 |
| U6.15 CON4.2 |
| 37985700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 31750200 41859000 1 609600 1536 |
| 23622000 41859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_2 0 -2 |
| U6.12 CON4.16 |
| 49415700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 36992700 48046500 1 609600 1536 |
| 19587000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_3 0 -2 |
| U6.10 CON4.17 |
| 57035700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 40487700 52171500 1 609600 1536 |
| 19587000 52171500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_0 0 -2 |
| U6.14 CON4.15 |
| 41795700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 33497700 43921500 1 609600 1536 |
| 19587000 43921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_1 0 -2 |
| U6.13 CON4.3 |
| 45605700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 35245200 45984000 1 609600 1536 |
| 23622000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_2 0 -2 |
| U6.11 CON4.4 |
| 53225700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 38740200 50109000 1 609600 1536 |
| 23622000 50109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_3 0 -2 |
| U7.16 CON4.5 |
| 67208400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48864600 54234000 1 609600 1536 |
| 23622000 54234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_4 0 -2 |
| U7.15 CON4.18 |
| 71018400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 50612100 56296500 1 609600 1536 |
| 19587000 56296500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_5 0 -2 |
| U7.14 CON4.6 |
| 74828400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52359600 58359000 1 609600 1536 |
| 23622000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_6 0 -2 |
| U7.13 CON4.19 |
| 78638400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55168800 59359800 1 609600 1536 |
| 25488900 59359800 1 609600 1536 |
| 24427200 60421500 1 609600 1536 |
| 19587000 60421500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_7 0 -2 |
| U7.12 CON4.7 |
| 82448400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57988200 60350400 1 609600 1536 |
| 27622500 60350400 1 609600 1536 |
| 25488900 62484000 1 609600 1536 |
| 23622000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_RTS 0 -2 |
| U7.11 CON4.20 |
| 86258400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57602100 64546500 1 609600 1536 |
| 19587000 64546500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_DTR 0 -2 |
| U7.10 CON4.8 |
| 90068400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 73075800 52882800 1 609600 1536 |
| 71856600 52882800 1 609600 1536 |
| 58130400 66609000 1 609600 1536 |
| 23622000 66609000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_4 0 -2 |
| R4.2 CON4.10 |
| 91630500 76962000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 81419700 66751200 1 609600 1536 |
| 63627000 66751200 1 609600 1536 |
| 55519200 74859000 1 609600 1536 |
| 23622000 74859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_5 0 -2 |
| R3.2 CON4.22 |
| 91630500 71628000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 85763100 65760600 1 609600 1536 |
| 63207900 65760600 1 609600 1536 |
| 56172000 72796500 1 609600 1536 |
| 19587000 72796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_6 0 -2 |
| R1.2 CON4.21 |
| 91630500 60960000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 65189100 60960000 1 609600 1536 |
| 57477600 68671500 1 609600 1536 |
| 19587000 68671500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_7 0 -2 |
| R2.2 CON4.9 |
| 91630500 66294000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 88811100 66294000 1 609600 1536 |
| 87287100 64770000 1 609600 1536 |
| 62788800 64770000 1 609600 1536 |
| 56824800 70734000 1 609600 1536 |
| 23622000 70734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_3 0 -2 |
| R11.2 CON4.23 |
| 64960500 68580000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 56619000 76921500 1 609600 1536 |
| 19587000 76921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_DSR 0 -2 |
| R12.2 CON4.11 |
| 64960500 74676000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 61760100 74676000 1 609600 1536 |
| 57452100 78984000 1 609600 1536 |
| 23622000 78984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_CTS 0 -2 |
| R13.2 CON4.24 |
| 64960500 80772000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 44005500 80772000 1 609600 1536 |
| 43731000 81046500 1 609600 1536 |
| 19587000 81046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_RI 0 -2 |
| R14.2 CON4.12 |
| 64960500 86868000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 46253400 86868000 1 609600 1536 |
| 42494400 83109000 1 609600 1536 |
| 23622000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_3 0 -2 |
| CON1.15 U2.9 |
| 149577000 43921500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 151599900 45944400 1 609600 1536 |
| 151599900 48046500 1 609600 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 151599900 99098100 1 609600 1536 |
| 141427200 109270800 1 609600 1536 |
| 122377200 109270800 1 609600 1536 |
| 118643400 105537000 1 609600 1536 |
| 113919000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* TXD 0 -2 |
| D1.A CON3.3 |
| 81534000 93154500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62068500 93154500 1 609600 1536 |
| 53721000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01853 0 -2 |
| U1.7 R1.1 |
| 121958100 61950600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 113957100 61950600 1 609600 1536 |
| 112966500 60960000 1 609600 1536 |
| 104965500 60960000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01906 0 -2 |
| U1.5 R2.1 |
| 121958100 69570600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 116243100 69570600 1 609600 1536 |
| 112966500 66294000 1 609600 1536 |
| 104965500 66294000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01959 0 -2 |
| U1.3 R3.1 |
| 121958100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 118529100 77190600 1 609600 1536 |
| 112966500 71628000 1 609600 1536 |
| 104965500 71628000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02012 0 -2 |
| U1.1 R4.1 |
| 121958100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 117881400 80733900 1 609600 1536 |
| 108737400 80733900 1 609600 1536 |
| 104965500 76962000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02164 0 -2 |
| U2.7 R11.1 |
| 110109000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 101841300 85839300 1 609600 1536 |
| 95097600 85839300 1 609600 1536 |
| 78295500 69037200 1 609600 1536 |
| 78295500 68580000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02168 0 -2 |
| U2.3 R13.1 |
| 94869000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87896700 87134700 1 609600 1536 |
| 84658200 87134700 1 609600 1536 |
| 78295500 80772000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02134 0 -2 |
| U2.5 R12.1 |
| 102489000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 98221800 89839800 1 609600 1536 |
| 93459300 89839800 1 609600 1536 |
| 78295500 74676000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02160 0 -2 |
| U2.1 R14.1 |
| 87249000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80010000 86868000 1 609600 1536 |
| 78295500 86868000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* GND 0 -2 |
| CON1.18 CON1.19 |
| 149577000 56296500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 60421500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.19 CON1.20 |
| 149577000 60421500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 64546500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.20 CON1.21 |
| 149577000 64546500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 68671500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.21 CON1.22 |
| 149577000 68671500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 72796500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.22 CON1.23 |
| 149577000 72796500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 76921500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.23 CON1.24 |
| 149577000 76921500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 81046500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.24 CON1.25 |
| 149577000 81046500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 85171500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.25 U1.15 |
| 149577000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 87210898 1 952500 1536 |
| 147329098 89458800 1 952500 1536 |
| 135178800 89458800 1 952500 1536 |
| 131368800 85648800 1 952500 1536 |
| 131368800 84810600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 83019900 1 952500 1536 |
| 133388100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.15 U1.13 |
| 133388100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 78981300 1 952500 1536 |
| 131368800 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 75399900 1 952500 1536 |
| 133388100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.13 U1.11 |
| 133388100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 71361300 1 952500 1536 |
| 131368800 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 67779900 1 952500 1536 |
| 133388100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.11 U1.9 |
| 133388100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 63741300 1 952500 1536 |
| 131368800 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 60159900 1 952500 1536 |
| 133388100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.9 U1.8 |
| 133388100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U1.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 105270300 33323283 1 952500 1536 |
| 109318425 37371408 1 952500 1536 |
| 109318425 45500925 1 952500 1536 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.8 U1.6 |
| 121958100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 60159900 1 952500 1536 |
| 123977400 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 63741300 1 952500 1536 |
| 121958100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U7.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101365050 28041600 1 952500 1536 |
| 97783650 24460200 1 952500 1536 |
| 93878400 24460200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.6 U1.4 |
| 121958100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 67779900 1 952500 1536 |
| 123977400 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 71361300 1 952500 1536 |
| 121958100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.4 U1.2 |
| 121958100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 75399900 1 952500 1536 |
| 123977400 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 78981300 1 952500 1536 |
| 121958100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.2 C1.C |
| 121958100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 128016000 87058500 1 952500 1536 |
| 128016000 99822000 65 952500 768 THERMAL TEARDROP P 90 90 |
| C1.C U2.8 |
| 128016000 99822000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 122301000 94107000 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.6 U2.8 |
| 106299000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 108318300 96126300 1 952500 1536 |
| 111899700 96126300 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.4 U2.6 |
| 98679000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 100698300 96126300 1 952500 1536 |
| 104279700 96126300 1 952500 1536 |
| 106299000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 U2.4 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 93078300 96126300 1 952500 1536 |
| 96659700 96126300 1 952500 1536 |
| 98679000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON3.5 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 82600800 96393000 1 952500 1536 |
| 67080000 96393000 1 952500 1536 |
| 61971000 101502000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON4.13 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 83972400 92735400 1 952500 1536 |
| 81229200 89992200 1 952500 1536 |
| 47358300 89992200 1 952500 1536 |
| 44600100 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.25 CON4.13 |
| 19587000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 21297900 86882400 1 952500 1536 |
| 21297900 86967300 1 952500 1536 |
| 21564600 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.8 U6.8 |
| 93878400 24460200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 26460450 1 952500 1536 |
| 63112650 26460450 1 952500 1536 |
| 60845700 24193500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* STROBE 0 -2 |
| U6.1 CON1.1 |
| 34175700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48615600 9753600 1 609600 1536 |
| 117336600 9753600 1 609600 1536 |
| 145317000 37734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D0 0 -2 |
| CON1.2 U6.3 |
| 145317000 41859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 41859000 1 609600 1536 |
| 113325900 11734800 1 609600 1536 |
| 54254400 11734800 1 609600 1536 |
| 41795700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D1 0 -2 |
| U6.4 CON1.3 |
| 45605700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57073800 12725400 1 609600 1536 |
| 112058400 12725400 1 609600 1536 |
| 145317000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DCD 0 -2 |
| J3.1 CON3.1 |
| 45339000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 45339000 97650300 1 609600 1536 |
| 45471000 97782300 1 609600 1536 |
| 45471000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D2 0 -2 |
| CON1.4 U6.6 |
| 145317000 50109000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 50109000 1 609600 1536 |
| 107825159 14706600 1 609600 1536 |
| 62712600 14706600 1 609600 1536 |
| 53225700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RXD 0 -2 |
| J3.2 CON3.2 |
| 49149000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 49149000 97497900 1 609600 1536 |
| 49596000 97944900 1 609600 1536 |
| 49596000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D3 0 -2 |
| CON1.5 U7.1 |
| 145317000 54234000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 54234000 1 609600 1536 |
| 105903900 16687800 1 609600 1536 |
| 74980800 16687800 1 609600 1536 |
| 67208400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* +12V 0 -2 |
| J1.1 U7.9 |
| 105003600 39319200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101155500 39319200 1 952500 1536 |
| 97726500 35890200 1 952500 1536 |
| 93878400 35890200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.9 U6.9 |
| 93878400 35890200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 33889950 1 952500 1536 |
| 65403484 33889950 1 952500 1536 |
| 63669934 35623500 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.1 U6.9 |
| 23622000 37734000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 27732750 33623250 1 952500 1536 |
| 58845450 33623250 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *POUR* POUR ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES FLAGS [OWNERNAME SIGNAME HATCHGRID HATCHRAD] |
| *REMARK* PIECETYPE CORNERS ARCS WIDTH LEVEL |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| HP26402539 POUROUT 6096000 119253000 1 0 HP26402539 GND |
| POLY 5 0 381000 1 |
| 2667000 -3048000 |
| 154686000 -3048000 |
| 154686000 -110490000 |
| 2667000 -110490000 |
| 2667000 -3048000 |
| ANP000003 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -630092783 -585044931 |
| -629958079 -584910227 2250 1519 |
| -629775891 -584854570 |
| -627954000 -584298000 1969 -68 |
| -629829001 -584634790 |
| -630016500 -584668469 101 1596 |
| -630203999 -584634790 |
| -632079000 -584298000 3498 -42 |
| -630233813 -584771647 |
| -630049295 -584819011 1656 593 |
| -630183999 -584953715 |
| -630092783 -585044931 |
| ANP000004 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -625967783 -585044931 |
| -625833079 -584910227 2250 1519 |
| -625650891 -584854570 |
| -623829000 -584298000 1969 -68 |
| -625704001 -584634790 |
| -625891500 -584668469 101 1596 |
| -626078999 -584634790 |
| -627954000 -584298000 3498 -42 |
| -626108813 -584771647 |
| -625924295 -584819011 1656 593 |
| -626058999 -584953715 |
| -625967783 -585044931 |
| ANP000005 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -635963391 -579481430 |
| -636145579 -579425773 3430 1519 |
| -636280283 -579291069 |
| -636371499 -579382285 |
| -636236795 -579516989 1350 593 |
| -636421313 -579564353 |
| -638266500 -580038000 143 -42 |
| -636391499 -579701210 |
| -636204000 -579667531 1901 1596 |
| -636016501 -579701210 |
| -634141500 -580038000 1698 -68 |
| -635963391 -579481430 |
| ANP000006 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 13 8 381000 1 |
| -629752196 -576663912 |
| -629886900 -576529208 3150 1350 |
| -629886900 -576338708 |
| -633249014 -576338708 |
| -633249014 -576529208 900 450 |
| -633383718 -576394504 |
| -634888431 -577899217 |
| -634753727 -578033921 1350 1519 |
| -634698070 -578216109 |
| -634141500 -580038000 1069 -968 |
| -632266499 -579701210 |
| -632079000 -579667531 1901 1596 |
| -631891501 -579701210 |
| -630016500 -580038000 1698 -492 |
| -630986326 -578398338 |
| -631083308 -578234372 3006 593 |
| -630892808 -578234372 |
| -630892808 -578167502 |
| -630016500 -578167502 1800 -450 |
| -630636143 -577547859 |
| -629752196 -576663912 |
| ANP000008 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 33 21 381000 1 |
| -597682500 -582155714 |
| -597817204 -582021010 3150 1576 |
| -597890583 -581845210 |
| -598551000 -580263000 2926 -785 |
| -599971455 -581223128 |
| -600129283 -581329808 340 559 |
| -600129283 -581139308 |
| -600951300 -581139308 |
| -600951300 -580263000 2700 -450 |
| -601570943 -580882643 |
| -602210982 -580242604 |
| -602345686 -580377308 450 450 |
| -602345686 -580186808 |
| -602687717 -580186808 |
| -602687717 -580377308 900 559 |
| -602845545 -580270628 |
| -604266000 -579310500 3259 -2159 |
| -604850985 -577698876 |
| -604915983 -577519808 2899 1600 |
| -604915983 -577329308 |
| -627860112 -577329308 |
| -627860112 -577519808 900 450 |
| -627994816 -577385104 |
| -628861442 -578251730 |
| -628726738 -578386434 1350 970 |
| -628843989 -578536576 |
| -630016500 -580038000 520 -418 |
| -628141499 -579701210 |
| -627954000 -579667531 1901 1596 |
| -627766501 -579701210 |
| -625891500 -580038000 1698 -1392 |
| -624251838 -579068174 |
| -624087872 -578971192 2106 593 |
| -624087872 -579161692 |
| -622893300 -579161692 |
| -622893300 -580038000 900 -450 |
| -622273657 -579418357 |
| -617301724 -584390290 |
| -617167020 -584255586 2250 1653 |
| -617002595 -584159384 |
| -613599000 -582168000 2103 -2857 |
| -612605439 -585984138 |
| -612557441 -586168492 1045 1654 |
| -612557441 -586358992 |
| -607527286 -586358992 |
| -607527286 -586168492 2700 450 |
| -607392582 -586303196 |
| -605457143 -584367757 |
| -604837500 -584987400 1350 -450 |
| -604837500 -584111092 |
| -599716786 -584111092 |
| -599716786 -583920592 2700 450 |
| -599582082 -584055296 |
| -597682500 -582155714 |
| ANP000014 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 15 12 381000 1 |
| -536559790 -640003499 |
| -536593469 -639816000 2801 1596 |
| -536559790 -639628501 |
| -536223000 -637753500 2598 -492 |
| -537862662 -638723326 |
| -538026628 -638820308 306 593 |
| -538026628 -638629808 |
| -538639159 -638629808 |
| -538639159 -638820308 900 1183 |
| -538806780 -638910825 |
| -540483000 -639816000 283 -1081 |
| -540146210 -641691001 |
| -540112531 -641878500 1001 1596 |
| -540146210 -642065999 |
| -540483000 -643941000 798 -1081 |
| -538806780 -644846175 |
| -538639159 -644936692 1516 1183 |
| -538639159 -645127192 |
| -538026628 -645127192 |
| -538026628 -644936692 2700 593 |
| -537862662 -645033674 |
| -536223000 -646003500 1493 -492 |
| -536559790 -644128499 |
| -536593469 -643941000 2801 1596 |
| -536559790 -643753501 |
| -536223000 -641878500 2598 -1596 |
| -536559790 -640003499 |
| ANP000015 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -602888817 |
| -535076408 -602493183 |
| -535266908 -602493183 0 1171 |
| -535353825 -602323667 |
| -536223000 -600628500 2971 -169 |
| -535886210 -602503501 |
| -535852531 -602691000 1001 1596 |
| -535886210 -602878499 |
| -536223000 -604753500 798 -169 |
| -535353825 -603058333 |
| -535266908 -602888817 2428 1171 |
| -535076408 -602888817 |
| ANP000016 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -607013817 |
| -535076408 -606618183 |
| -535266908 -606618183 0 1171 |
| -535353825 -606448667 |
| -536223000 -604753500 2971 -169 |
| -535886210 -606628501 |
| -535852531 -606816000 1001 1596 |
| -535886210 -607003499 |
| -536223000 -608878500 798 -169 |
| -535353825 -607183333 |
| -535266908 -607013817 2428 1171 |
| -535076408 -607013817 |
| ANP000017 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -611138817 |
| -535076408 -610743183 |
| -535266908 -610743183 0 1171 |
| -535353825 -610573667 |
| -536223000 -608878500 2971 -169 |
| -535886210 -610753501 |
| -535852531 -610941000 1001 1596 |
| -535886210 -611128499 |
| -536223000 -613003500 798 -169 |
| -535353825 -611308333 |
| -535266908 -611138817 2428 1171 |
| -535076408 -611138817 |
| ANP000018 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -615263817 |
| -535076408 -614868183 |
| -535266908 -614868183 0 1171 |
| -535353825 -614698667 |
| -536223000 -613003500 2971 -169 |
| -535886210 -614878501 |
| -535852531 -615066000 1001 1596 |
| -535886210 -615253499 |
| -536223000 -617128500 798 -169 |
| -535353825 -615433333 |
| -535266908 -615263817 2428 1171 |
| -535076408 -615263817 |
| ANP000019 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -619388817 |
| -535076408 -618993183 |
| -535266908 -618993183 0 1171 |
| -535353825 -618823667 |
| -536223000 -617128500 2971 -169 |
| -535886210 -619003501 |
| -535852531 -619191000 1001 1596 |
| -535886210 -619378499 |
| -536223000 -621253500 798 -169 |
| -535353825 -619558333 |
| -535266908 -619388817 2428 1171 |
| -535076408 -619388817 |
| ANP000020 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -623513817 |
| -535076408 -623118183 |
| -535266908 -623118183 0 1171 |
| -535353825 -622948667 |
| -536223000 -621253500 2971 -169 |
| -535886210 -623128501 |
| -535852531 -623316000 1001 1596 |
| -535886210 -623503499 |
| -536223000 -625378500 798 -169 |
| -535353825 -623683333 |
| -535266908 -623513817 2428 1171 |
| -535076408 -623513817 |
| ANP000021 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -627638817 |
| -535076408 -627243183 |
| -535266908 -627243183 0 1171 |
| -535353825 -627073667 |
| -536223000 -625378500 2971 -169 |
| -535886210 -627253501 |
| -535852531 -627441000 1001 1596 |
| -535886210 -627628499 |
| -536223000 -629503500 798 -169 |
| -535353825 -627808333 |
| -535266908 -627638817 2428 1171 |
| -535076408 -627638817 |
| ANP000022 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -631763817 |
| -535076408 -631368183 |
| -535266908 -631368183 0 1171 |
| -535353825 -631198667 |
| -536223000 -629503500 2971 -169 |
| -535886210 -631378501 |
| -535852531 -631566000 1001 1596 |
| -535886210 -631753499 |
| -536223000 -633628500 798 -169 |
| -535353825 -631933333 |
| -535266908 -631763817 2428 1171 |
| -535076408 -631763817 |
| ANP000024 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535476069 -639892283 |
| -535610773 -639757579 3150 1519 |
| -535666430 -639575391 |
| -536223000 -637753500 2869 -68 |
| -535886210 -639628501 |
| -535852531 -639816000 1001 1596 |
| -535886210 -640003499 |
| -536223000 -641878500 798 -42 |
| -535749353 -640033313 |
| -535701989 -639848795 2556 593 |
| -535567285 -639983499 |
| -535476069 -639892283 |
| ANP000030 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -604940999 |
| -540853469 -604753500 2801 1596 |
| -540819790 -604566001 |
| -540483000 -602691000 2598 -42 |
| -540956647 -604536187 |
| -541004011 -604720705 756 593 |
| -541138715 -604586001 |
| -541229931 -604677217 |
| -541095227 -604811921 1350 1519 |
| -541039570 -604994109 |
| -540483000 -606816000 1069 -68 |
| -540819790 -604940999 |
| ANP000031 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -609065999 |
| -540853469 -608878500 2801 1596 |
| -540819790 -608691001 |
| -540483000 -606816000 2598 -42 |
| -540956647 -608661187 |
| -541004011 -608845705 756 593 |
| -541138715 -608711001 |
| -541229931 -608802217 |
| -541095227 -608936921 1350 1519 |
| -541039570 -609119109 |
| -540483000 -610941000 1069 -68 |
| -540819790 -609065999 |
| ANP000032 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -613190999 |
| -540853469 -613003500 2801 1596 |
| -540819790 -612816001 |
| -540483000 -610941000 2598 -42 |
| -540956647 -612786187 |
| -541004011 -612970705 756 593 |
| -541138715 -612836001 |
| -541229931 -612927217 |
| -541095227 -613061921 1350 1519 |
| -541039570 -613244109 |
| -540483000 -615066000 1069 -68 |
| -540819790 -613190999 |
| ANP000033 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -617315999 |
| -540853469 -617128500 2801 1596 |
| -540819790 -616941001 |
| -540483000 -615066000 2598 -42 |
| -540956647 -616911187 |
| -541004011 -617095705 756 593 |
| -541138715 -616961001 |
| -541229931 -617052217 |
| -541095227 -617186921 1350 1519 |
| -541039570 -617369109 |
| -540483000 -619191000 1069 -68 |
| -540819790 -617315999 |
| ANP000034 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -621440999 |
| -540853469 -621253500 2801 1596 |
| -540819790 -621066001 |
| -540483000 -619191000 2598 -42 |
| -540956647 -621036187 |
| -541004011 -621220705 756 593 |
| -541138715 -621086001 |
| -541229931 -621177217 |
| -541095227 -621311921 1350 1519 |
| -541039570 -621494109 |
| -540483000 -623316000 1069 -68 |
| -540819790 -621440999 |
| ANP000035 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -625565999 |
| -540853469 -625378500 2801 1596 |
| -540819790 -625191001 |
| -540483000 -623316000 2598 -42 |
| -540956647 -625161187 |
| -541004011 -625345705 756 593 |
| -541138715 -625211001 |
| -541229931 -625302217 |
| -541095227 -625436921 1350 1519 |
| -541039570 -625619109 |
| -540483000 -627441000 1069 -68 |
| -540819790 -625565999 |
| ANP000036 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -629690999 |
| -540853469 -629503500 2801 1596 |
| -540819790 -629316001 |
| -540483000 -627441000 2598 -42 |
| -540956647 -629286187 |
| -541004011 -629470705 756 593 |
| -541138715 -629336001 |
| -541229931 -629427217 |
| -541095227 -629561921 1350 1519 |
| -541039570 -629744109 |
| -540483000 -631566000 1069 -68 |
| -540819790 -629690999 |
| ANP000037 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -642065999 |
| -540853469 -641878500 2801 1596 |
| -540819790 -641691001 |
| -540483000 -639816000 2598 -42 |
| -540956647 -641661187 |
| -541004011 -641845705 756 593 |
| -541138715 -641711001 |
| -541229931 -641802217 |
| -541095227 -641936921 1350 1519 |
| -541039570 -642119109 |
| -540483000 -643941000 1069 -68 |
| -540819790 -642065999 |
| ANP000078 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -605910825 |
| -664021841 -605820308 3316 1183 |
| -664021841 -605629808 |
| -664409372 -605629808 |
| -664409372 -605820308 900 593 |
| -664573338 -605723326 |
| -666213000 -604753500 3293 -492 |
| -665876210 -606628501 |
| -665842531 -606816000 1001 1596 |
| -665876210 -607003499 |
| -666213000 -608878500 798 -492 |
| -664573338 -607908674 |
| -664409372 -607811692 2106 593 |
| -664409372 -608002192 |
| -664021841 -608002192 |
| -664021841 -607811692 2700 1183 |
| -663854220 -607721175 |
| -662178000 -606816000 2083 -567 |
| -663854220 -605910825 |
| ANP000079 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -610035825 |
| -664021841 -609945308 3316 1183 |
| -664021841 -609754808 |
| -664409372 -609754808 |
| -664409372 -609945308 900 593 |
| -664573338 -609848326 |
| -666213000 -608878500 3293 -492 |
| -665876210 -610753501 |
| -665842531 -610941000 1001 1596 |
| -665876210 -611128499 |
| -666213000 -613003500 798 -492 |
| -664573338 -612033674 |
| -664409372 -611936692 2106 593 |
| -664409372 -612127192 |
| -664021841 -612127192 |
| -664021841 -611936692 2700 1183 |
| -663854220 -611846175 |
| -662178000 -610941000 2083 -567 |
| -663854220 -610035825 |
| ANP000080 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -614160825 |
| -664021841 -614070308 3316 1183 |
| -664021841 -613879808 |
| -664409372 -613879808 |
| -664409372 -614070308 900 593 |
| -664573338 -613973326 |
| -666213000 -613003500 3293 -492 |
| -665876210 -614878501 |
| -665842531 -615066000 1001 1596 |
| -665876210 -615253499 |
| -666213000 -617128500 798 -492 |
| -664573338 -616158674 |
| -664409372 -616061692 2106 593 |
| -664409372 -616252192 |
| -664021841 -616252192 |
| -664021841 -616061692 2700 1183 |
| -663854220 -615971175 |
| -662178000 -615066000 2083 -567 |
| -663854220 -614160825 |
| ANP000081 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -618285825 |
| -664021841 -618195308 3316 1183 |
| -664021841 -618004808 |
| -664409372 -618004808 |
| -664409372 -618195308 900 593 |
| -664573338 -618098326 |
| -666213000 -617128500 3293 -492 |
| -665876210 -619003501 |
| -665842531 -619191000 1001 1596 |
| -665876210 -619378499 |
| -666213000 -621253500 798 -492 |
| -664573338 -620283674 |
| -664409372 -620186692 2106 593 |
| -664409372 -620377192 |
| -664021841 -620377192 |
| -664021841 -620186692 2700 1183 |
| -663854220 -620096175 |
| -662178000 -619191000 2083 -567 |
| -663854220 -618285825 |
| ANP000082 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -622410825 |
| -664021841 -622320308 3316 1183 |
| -664021841 -622129808 |
| -664409372 -622129808 |
| -664409372 -622320308 900 593 |
| -664573338 -622223326 |
| -666213000 -621253500 3293 -492 |
| -665876210 -623128501 |
| -665842531 -623316000 1001 1596 |
| -665876210 -623503499 |
| -666213000 -625378500 798 -492 |
| -664573338 -624408674 |
| -664409372 -624311692 2106 593 |
| -664409372 -624502192 |
| -664021841 -624502192 |
| -664021841 -624311692 2700 1183 |
| -663854220 -624221175 |
| -662178000 -623316000 2083 -567 |
| -663854220 -622410825 |
| ANP000083 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -626535825 |
| -664021841 -626445308 3316 1183 |
| -664021841 -626254808 |
| -664409372 -626254808 |
| -664409372 -626445308 900 593 |
| -664573338 -626348326 |
| -666213000 -625378500 3293 -492 |
| -665876210 -627253501 |
| -665842531 -627441000 1001 1596 |
| -665876210 -627628499 |
| -666213000 -629503500 798 -492 |
| -664573338 -628533674 |
| -664409372 -628436692 2106 593 |
| -664409372 -628627192 |
| -664021841 -628627192 |
| -664021841 -628436692 2700 1183 |
| -663854220 -628346175 |
| -662178000 -627441000 2083 -567 |
| -663854220 -626535825 |
| ANP000084 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -630660825 |
| -664021841 -630570308 3316 1183 |
| -664021841 -630379808 |
| -664409372 -630379808 |
| -664409372 -630570308 900 593 |
| -664573338 -630473326 |
| -666213000 -629503500 3293 -492 |
| -665876210 -631378501 |
| -665842531 -631566000 1001 1596 |
| -665876210 -631753499 |
| -666213000 -633628500 798 -492 |
| -664573338 -632658674 |
| -664409372 -632561692 2106 593 |
| -664409372 -632752192 |
| -664021841 -632752192 |
| -664021841 -632561692 2700 1183 |
| -663854220 -632471175 |
| -662178000 -631566000 2083 -567 |
| -663854220 -630660825 |
| ANP000085 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -634785825 |
| -664021841 -634695308 3316 1183 |
| -664021841 -634504808 |
| -664409372 -634504808 |
| -664409372 -634695308 900 593 |
| -664573338 -634598326 |
| -666213000 -633628500 3293 -492 |
| -665876210 -635503501 |
| -665842531 -635691000 1001 1596 |
| -665876210 -635878499 |
| -666213000 -637753500 798 -492 |
| -664573338 -636783674 |
| -664409372 -636686692 2106 593 |
| -664409372 -636877192 |
| -664021841 -636877192 |
| -664021841 -636686692 2700 1183 |
| -663854220 -636596175 |
| -662178000 -635691000 2083 -567 |
| -663854220 -634785825 |
| ANP000086 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -638910825 |
| -664021841 -638820308 3316 1183 |
| -664021841 -638629808 |
| -664409372 -638629808 |
| -664409372 -638820308 900 593 |
| -664573338 -638723326 |
| -666213000 -637753500 3293 -492 |
| -665876210 -639628501 |
| -665842531 -639816000 1001 1596 |
| -665876210 -640003499 |
| -666213000 -641878500 798 -492 |
| -664573338 -640908674 |
| -664409372 -640811692 2106 593 |
| -664409372 -641002192 |
| -664021841 -641002192 |
| -664021841 -640811692 2700 1183 |
| -663854220 -640721175 |
| -662178000 -639816000 2083 -567 |
| -663854220 -638910825 |
| ANP000087 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -643035825 |
| -664021841 -642945308 3316 1183 |
| -664021841 -642754808 |
| -664409372 -642754808 |
| -664409372 -642945308 900 593 |
| -664573338 -642848326 |
| -666213000 -641878500 3293 -492 |
| -665876210 -643753501 |
| -665842531 -643941000 1001 1596 |
| -665876210 -644128499 |
| -666213000 -646003500 798 -492 |
| -664573338 -645033674 |
| -664409372 -644936692 2106 593 |
| -664409372 -645127192 |
| -664021841 -645127192 |
| -664021841 -644936692 2700 1183 |
| -663854220 -644846175 |
| -662178000 -643941000 2083 -567 |
| -663854220 -643035825 |
| ANP000088 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 569 432 381000 1 |
| -525208500 -676656000 |
| -525208500 -569976000 |
| -525399000 -569976000 0 900 |
| -525399000 -569785500 |
| -676656000 -569785500 |
| -676656000 -569976000 900 900 |
| -676846500 -569976000 |
| -676846500 -676656000 |
| -676656000 -676656000 1800 900 |
| -676656000 -676846500 |
| -638083494 -676846500 |
| -638083494 -676656000 2700 1350 |
| -637948790 -676521296 |
| -651093282 -663376804 |
| -651227986 -663511508 450 450 |
| -651227986 -663321008 |
| -652767300 -663321008 |
| -652767300 -662749500 2700 -900 |
| -653338808 -662749500 |
| -653338808 -660463500 |
| -652767300 -660463500 1800 -900 |
| -652767300 -659891992 |
| -650481300 -659891992 |
| -650481300 -660463500 900 -900 |
| -649909792 -660463500 |
| -649909792 -661598692 |
| -649719292 -661598692 1800 23 |
| -649909632 -661606500 |
| -649719292 -661614308 1776 23 |
| -649909792 -661614308 |
| -649909792 -662002814 |
| -649719292 -662002814 1800 450 |
| -649853996 -662137518 |
| -649800032 -662191482 |
| -649665328 -662056778 2250 1486 |
| -649480226 -662011750 |
| -647814300 -661606500 1936 -134 |
| -649528794 -661613527 |
| -649719292 -661614308 2 21 |
| -649528952 -661606500 |
| -649719292 -661598692 3576 21 |
| -649528794 -661599473 |
| -647814300 -661606500 1797 -1795 |
| -646099799 -661601531 |
| -645909300 -661600979 1801 14 |
| -646099720 -661606500 |
| -645909300 -661612021 1783 14 |
| -646099799 -661611469 |
| -647814300 -661606500 3598 -107 |
| -646130974 -661932000 |
| -645943939 -661968167 1690 559 |
| -646078643 -662102871 |
| -645990032 -662191482 |
| -645855328 -662056778 2250 1486 |
| -645670226 -662011750 |
| -644004300 -661606500 1936 -135 |
| -645718801 -661611469 |
| -645909300 -661612021 1 14 |
| -645718880 -661606500 |
| -645909300 -661600979 3583 14 |
| -645718801 -661601531 |
| -644004300 -661606500 1798 -1796 |
| -642289799 -661601531 |
| -642099300 -661600979 1801 14 |
| -642289720 -661606500 |
| -642099300 -661612021 1783 14 |
| -642289799 -661611469 |
| -644004300 -661606500 3598 -107 |
| -642320974 -661932000 |
| -642133939 -661968167 1690 559 |
| -642268643 -662102871 |
| -642180032 -662191482 |
| -642045328 -662056778 2250 1486 |
| -641860226 -662011750 |
| -640194300 -661606500 1936 -135 |
| -641908801 -661611469 |
| -642099300 -661612021 1 14 |
| -641908880 -661606500 |
| -642099300 -661600979 3583 14 |
| -641908801 -661601531 |
| -640194300 -661606500 1798 -1796 |
| -638479799 -661601531 |
| -638289300 -661600979 1801 14 |
| -638479720 -661606500 |
| -638289300 -661612021 1783 14 |
| -638479799 -661611469 |
| -640194300 -661606500 3598 -107 |
| -638510974 -661932000 |
| -638323939 -661968167 1690 559 |
| -638458643 -662102871 |
| -638370032 -662191482 |
| -638235328 -662056778 2250 1486 |
| -638050226 -662011750 |
| -636384300 -661606500 1936 -135 |
| -638098801 -661611469 |
| -638289300 -661612021 1 14 |
| -638098880 -661606500 |
| -638289300 -661600979 3583 14 |
| -638098801 -661601531 |
| -636384300 -661606500 1798 -1796 |
| -634669799 -661601531 |
| -634479300 -661600979 1801 14 |
| -634669720 -661606500 |
| -634479300 -661612021 1783 14 |
| -634669799 -661611469 |
| -636384300 -661606500 3598 -107 |
| -634700974 -661932000 |
| -634513939 -661968167 1690 559 |
| -634648643 -662102871 |
| -634560032 -662191482 |
| -634425328 -662056778 2250 1486 |
| -634240226 -662011750 |
| -632574300 -661606500 1936 -135 |
| -634288801 -661611469 |
| -634479300 -661612021 1 14 |
| -634288880 -661606500 |
| -634479300 -661600979 3583 14 |
| -634288801 -661601531 |
| -632574300 -661606500 1798 -1796 |
| -630859799 -661601531 |
| -630669300 -661600979 1801 14 |
| -630859720 -661606500 |
| -630669300 -661612021 1783 14 |
| -630859799 -661611469 |
| -632574300 -661606500 3598 -107 |
| -630890974 -661932000 |
| -630703939 -661968167 1690 559 |
| -630838643 -662102871 |
| -630750032 -662191482 |
| -630615328 -662056778 2250 1486 |
| -630430226 -662011750 |
| -628764300 -661606500 1936 -135 |
| -630478801 -661611469 |
| -630669300 -661612021 1 14 |
| -630478880 -661606500 |
| -630669300 -661600979 3583 14 |
| -630478801 -661601531 |
| -628764300 -661606500 1798 -1796 |
| -627049799 -661601531 |
| -626859300 -661600979 1801 14 |
| -627049720 -661606500 |
| -626859300 -661612021 1783 14 |
| -627049799 -661611469 |
| -628764300 -661606500 3598 -107 |
| -627080974 -661932000 |
| -626893939 -661968167 1690 559 |
| -627028643 -662102871 |
| -626940032 -662191482 |
| -626805328 -662056778 2250 1486 |
| -626620226 -662011750 |
| -624954300 -661606500 1936 -135 |
| -626668801 -661611469 |
| -626859300 -661612021 1 14 |
| -626668880 -661606500 |
| -626859300 -661600979 3583 14 |
| -626668801 -661601531 |
| -624954300 -661606500 1798 -2835 |
| -625359550 -663272426 |
| -625404578 -663457528 763 1486 |
| -625539282 -663592232 |
| -619960818 -669170696 |
| -619826114 -669035992 2250 450 |
| -619826114 -669226492 |
| -612404102 -669226492 |
| -612404102 -669035992 2700 1350 |
| -612269398 -668901288 |
| -618060582 -663110104 |
| -618195286 -663244808 450 450 |
| -618195286 -663054308 |
| -619734600 -663054308 |
| -619734600 -662482800 2700 -900 |
| -620306108 -662482800 |
| -620306108 -660196800 |
| -619734600 -660196800 1800 -900 |
| -619734600 -659625292 |
| -617448600 -659625292 |
| -617448600 -660196800 900 -900 |
| -616877092 -660196800 |
| -616877092 -661331992 |
| -616686592 -661331992 1800 23 |
| -616876932 -661339800 |
| -616686592 -661347608 1776 23 |
| -616877092 -661347608 |
| -616877092 -661736114 |
| -616686592 -661736114 1800 450 |
| -616821296 -661870818 |
| -616767332 -661924782 |
| -616632628 -661790078 2250 1486 |
| -616447526 -661745050 |
| -614781600 -661339800 1936 -134 |
| -616496094 -661346827 |
| -616686592 -661347608 2 21 |
| -616496252 -661339800 |
| -616686592 -661331992 3576 21 |
| -616496094 -661332773 |
| -614781600 -661339800 1797 -1795 |
| -613067099 -661334831 |
| -612876600 -661334279 1801 14 |
| -613067020 -661339800 |
| -612876600 -661345321 1783 14 |
| -613067099 -661344769 |
| -614781600 -661339800 3598 -107 |
| -613098274 -661665300 |
| -612911239 -661701467 1690 559 |
| -613045943 -661836171 |
| -612957332 -661924782 |
| -612822628 -661790078 2250 1486 |
| -612637526 -661745050 |
| -610971600 -661339800 1936 -135 |
| -612686101 -661344769 |
| -612876600 -661345321 1 14 |
| -612686180 -661339800 |
| -612876600 -661334279 3583 14 |
| -612686101 -661334831 |
| -610971600 -661339800 1798 -1796 |
| -609257099 -661334831 |
| -609066600 -661334279 1801 14 |
| -609257020 -661339800 |
| -609066600 -661345321 1783 14 |
| -609257099 -661344769 |
| -610971600 -661339800 3598 -107 |
| -609288274 -661665300 |
| -609101239 -661701467 1690 559 |
| -609235943 -661836171 |
| -609147332 -661924782 |
| -609012628 -661790078 2250 1486 |
| -608827526 -661745050 |
| -607161600 -661339800 1936 -135 |
| -608876101 -661344769 |
| -609066600 -661345321 1 14 |
| -608876180 -661339800 |
| -609066600 -661334279 3583 14 |
| -608876101 -661334831 |
| -607161600 -661339800 1798 -1796 |
| -605447099 -661334831 |
| -605256600 -661334279 1801 14 |
| -605447020 -661339800 |
| -605256600 -661345321 1783 14 |
| -605447099 -661344769 |
| -607161600 -661339800 3598 -107 |
| -605478274 -661665300 |
| -605291239 -661701467 1690 559 |
| -605425943 -661836171 |
| -605337332 -661924782 |
| -605202628 -661790078 2250 1486 |
| -605017526 -661745050 |
| -603351600 -661339800 1936 -135 |
| -605066101 -661344769 |
| -605256600 -661345321 1 14 |
| -605066180 -661339800 |
| -605256600 -661334279 3583 14 |
| -605066101 -661334831 |
| -603351600 -661339800 1798 -1796 |
| -601637099 -661334831 |
| -601446600 -661334279 1801 14 |
| -601637020 -661339800 |
| -601446600 -661345321 1783 14 |
| -601637099 -661344769 |
| -603351600 -661339800 3598 -107 |
| -601668274 -661665300 |
| -601481239 -661701467 1690 559 |
| -601615943 -661836171 |
| -601527332 -661924782 |
| -601392628 -661790078 2250 1486 |
| -601207526 -661745050 |
| -599541600 -661339800 1936 -135 |
| -601256101 -661344769 |
| -601446600 -661345321 1 14 |
| -601256180 -661339800 |
| -601446600 -661334279 3583 14 |
| -601256101 -661334831 |
| -599541600 -661339800 1798 -1796 |
| -597827099 -661334831 |
| -597636600 -661334279 1801 14 |
| -597827020 -661339800 |
| -597636600 -661345321 1783 14 |
| -597827099 -661344769 |
| -599541600 -661339800 3598 -107 |
| -597858274 -661665300 |
| -597671239 -661701467 1690 559 |
| -597805943 -661836171 |
| -597717332 -661924782 |
| -597582628 -661790078 2250 1486 |
| -597397526 -661745050 |
| -595731600 -661339800 1936 -135 |
| -597446101 -661344769 |
| -597636600 -661345321 1 14 |
| -597446180 -661339800 |
| -597636600 -661334279 3583 14 |
| -597446101 -661334831 |
| -595731600 -661339800 1798 -1796 |
| -594017099 -661334831 |
| -593826600 -661334279 1801 14 |
| -594017020 -661339800 |
| -593826600 -661345321 1783 14 |
| -594017099 -661344769 |
| -595731600 -661339800 3598 -107 |
| -594048274 -661665300 |
| -593861239 -661701467 1690 559 |
| -593995943 -661836171 |
| -593907332 -661924782 |
| -593772628 -661790078 2250 1486 |
| -593587526 -661745050 |
| -591921600 -661339800 1936 -135 |
| -593636101 -661344769 |
| -593826600 -661345321 1 14 |
| -593636180 -661339800 |
| -593826600 -661334279 3583 14 |
| -593636101 -661334831 |
| -591921600 -661339800 1798 -2034 |
| -590350223 -662025593 |
| -590175626 -662101792 1564 1135 |
| -590175626 -662292292 |
| -583795471 -662292292 |
| -583795471 -662101792 2700 450 |
| -583660767 -662236496 |
| -581090775 -659666504 |
| -581225479 -659531800 3150 1135 |
| -581155901 -659354461 |
| -580529700 -657758400 2485 -2271 |
| -578933639 -657132199 |
| -578756300 -657062621 2014 1135 |
| -578621596 -657197325 |
| -573194104 -651769833 |
| -573328808 -651635129 3150 450 |
| -573138308 -651635129 |
| -573138308 -644589898 |
| -573328808 -644589898 0 538 |
| -573216513 -644436015 |
| -572262000 -643128000 2338 -2877 |
| -571307487 -644436015 |
| -571195192 -644589898 1261 538 |
| -571385692 -644589898 |
| -571385692 -650902433 |
| -571195192 -650902433 1800 1350 |
| -571060488 -651037137 |
| -570590824 -650567473 |
| -570725528 -650432769 3150 450 |
| -570535028 -650432769 |
| -570535028 -645096720 |
| -569658720 -645096720 1800 -450 |
| -570278363 -644477077 |
| -568581361 -642780075 |
| -568716065 -642645371 3150 538 |
| -568527848 -642615964 |
| -566928000 -642366000 1888 -2877 |
| -567177964 -643965848 |
| -567207371 -644154065 811 538 |
| -567342075 -644019361 |
| -568726616 -645403902 |
| -568591912 -645538606 1350 450 |
| -568782412 -645538606 |
| -568782412 -649700073 |
| -568591912 -649700073 1800 1350 |
| -568457208 -649834777 |
| -548465404 -629842973 |
| -548600108 -629708269 3150 450 |
| -548409608 -629708269 |
| -548409608 -622116300 |
| -547533300 -622116300 1800 -450 |
| -548152943 -621496657 |
| -542378001 -615721715 |
| -542512705 -615587011 3150 593 |
| -542328187 -615539647 |
| -540483000 -615066000 1943 -313 |
| -542304891 -614509430 |
| -542487079 -614453773 3430 1519 |
| -542621783 -614319069 |
| -545574296 -617271582 |
| -545439592 -617406286 1350 450 |
| -545630092 -617406286 |
| -545630092 -617943900 |
| -546506400 -617943900 0 -450 |
| -545886757 -618563543 |
| -550676243 -623353029 |
| -550541539 -623487733 1350 559 |
| -550728574 -623523900 |
| -552411900 -623849400 109 -1007 |
| -552406931 -625563901 |
| -552406379 -625754400 901 14 |
| -552411900 -625563980 |
| -552417421 -625754400 883 14 |
| -552416869 -625563901 |
| -552411900 -623849400 2698 -1796 |
| -552416869 -622134899 |
| -552417421 -621944400 2701 14 |
| -552411900 -622134820 |
| -552406379 -621944400 2683 14 |
| -552406931 -622134899 |
| -552411900 -623849400 898 -107 |
| -552086400 -622166074 |
| -552050233 -621979039 2590 559 |
| -551915529 -622113743 |
| -551826918 -622025132 |
| -551961622 -621890428 3150 1486 |
| -552006650 -621705326 |
| -552411900 -620039400 2836 -135 |
| -552406931 -621753901 |
| -552406379 -621944400 901 14 |
| -552411900 -621753980 |
| -552417421 -621944400 883 14 |
| -552416869 -621753901 |
| -552411900 -620039400 2698 -1796 |
| -552416869 -618324899 |
| -552417421 -618134400 2701 14 |
| -552411900 -618324820 |
| -552406379 -618134400 2683 14 |
| -552406931 -618324899 |
| -552411900 -620039400 898 -1035 |
| -550745974 -620444650 |
| -550560872 -620489678 1663 1486 |
| -550426168 -620624382 |
| -547438504 -617636718 |
| -547573208 -617502014 3150 450 |
| -547382708 -617502014 |
| -547382708 -616964400 |
| -546506400 -616964400 1800 -450 |
| -547126043 -616344757 |
| -542378001 -611596715 |
| -542512705 -611462011 3150 593 |
| -542328187 -611414647 |
| -540483000 -610941000 1943 -505 |
| -542021468 -609817535 |
| -542175314 -609705189 3238 1336 |
| -542200168 -609516317 |
| -542314500 -608647500 2774 -74 |
| -542314500 -609523808 |
| -544388114 -609523808 |
| -544388114 -609714308 900 450 |
| -544522818 -609579604 |
| -550676243 -615733029 |
| -550541539 -615867733 1350 559 |
| -550728574 -615903900 |
| -552411900 -616229400 109 -1007 |
| -552406931 -617943901 |
| -552406379 -618134400 901 14 |
| -552411900 -617943980 |
| -552417421 -618134400 883 14 |
| -552416869 -617943901 |
| -552411900 -616229400 2698 -1796 |
| -552416869 -614514899 |
| -552417421 -614324400 2701 14 |
| -552411900 -614514820 |
| -552406379 -614324400 2683 14 |
| -552406931 -614514899 |
| -552411900 -616229400 898 -107 |
| -552086400 -614546074 |
| -552050233 -614359039 2590 559 |
| -551915529 -614493743 |
| -551826918 -614405132 |
| -551961622 -614270428 3150 1486 |
| -552006650 -614085326 |
| -552411900 -612419400 2836 -135 |
| -552406931 -614133901 |
| -552406379 -614324400 901 14 |
| -552411900 -614133980 |
| -552417421 -614324400 883 14 |
| -552416869 -614133901 |
| -552411900 -612419400 2698 -1796 |
| -552416869 -610704899 |
| -552417421 -610514400 2701 14 |
| -552411900 -610704820 |
| -552406379 -610514400 2683 14 |
| -552406931 -610704899 |
| -552411900 -612419400 898 -1035 |
| -550745974 -612824650 |
| -550560872 -612869678 1663 1486 |
| -550426168 -613004382 |
| -545449643 -608027857 |
| -544830000 -608647500 1350 -450 |
| -544830000 -607771192 |
| -542756386 -607771192 |
| -542756386 -607580692 2700 450 |
| -542621682 -607715396 |
| -542378001 -607471715 |
| -542512705 -607337011 3150 593 |
| -542328187 -607289647 |
| -540483000 -606816000 1943 -313 |
| -542304891 -606259430 |
| -542487079 -606203773 3430 1519 |
| -542621783 -606069069 |
| -542886157 -606333443 |
| -543505800 -605713800 3150 -450 |
| -543505800 -606590108 |
| -549074414 -606590108 |
| -549074414 -606780608 900 450 |
| -549209118 -606645904 |
| -550676243 -608113029 |
| -550541539 -608247733 1350 559 |
| -550728574 -608283900 |
| -552411900 -608609400 109 -1007 |
| -552406931 -610323901 |
| -552406379 -610514400 901 14 |
| -552411900 -610323980 |
| -552417421 -610514400 883 14 |
| -552416869 -610323901 |
| -552411900 -608609400 2698 -1796 |
| -552416869 -606894899 |
| -552417421 -606704400 2701 14 |
| -552411900 -606894820 |
| -552406379 -606704400 2683 14 |
| -552406931 -606894899 |
| -552411900 -608609400 898 -107 |
| -552086400 -606926074 |
| -552050233 -606739039 2590 559 |
| -551915529 -606873743 |
| -551826918 -606785132 |
| -551961622 -606650428 3150 1486 |
| -552006650 -606465326 |
| -552411900 -604799400 2836 -135 |
| -552406931 -606513901 |
| -552406379 -606704400 901 14 |
| -552411900 -606513980 |
| -552417421 -606704400 883 14 |
| -552416869 -606513901 |
| -552411900 -604799400 2698 -1796 |
| -552416869 -603084899 |
| -552417421 -602894400 2701 14 |
| -552411900 -603084820 |
| -552406379 -602894400 2683 14 |
| -552406931 -603084899 |
| -552411900 -604799400 898 -1035 |
| -550745974 -605204650 |
| -550560872 -605249678 1663 1486 |
| -550426168 -605384382 |
| -550135943 -605094157 |
| -549516300 -605713800 1350 -450 |
| -549516300 -604837492 |
| -543947686 -604837492 |
| -543947686 -604646992 2700 450 |
| -543812982 -604781696 |
| -542378001 -603346715 |
| -542512705 -603212011 3150 593 |
| -542328187 -603164647 |
| -540483000 -602691000 1943 -942 |
| -540819790 -600815999 |
| -540853469 -600628500 2801 1596 |
| -540819790 -600441001 |
| -540483000 -598566000 2598 -492 |
| -542122662 -599535826 |
| -542286628 -599632808 306 593 |
| -542286628 -599442308 |
| -544898414 -599442308 |
| -544898414 -599632808 900 450 |
| -545033118 -599498104 |
| -547144057 -601609043 |
| -547763700 -600989400 3150 -450 |
| -547763700 -601865708 |
| -550833617 -601865708 |
| -550833617 -602056208 900 559 |
| -550991445 -601949528 |
| -552411900 -600989400 3259 -557 |
| -552406931 -602703901 |
| -552406379 -602894400 901 14 |
| -552411900 -602703980 |
| -552417421 -602894400 883 14 |
| -552416869 -602703901 |
| -552411900 -600989400 2698 -2357 |
| -550991445 -600029272 |
| -550833617 -599922592 2140 559 |
| -550833617 -600113092 |
| -548205586 -600113092 |
| -548205586 -599922592 2700 450 |
| -548070882 -600057296 |
| -545959943 -597946357 |
| -545340300 -598566000 1350 -450 |
| -545340300 -597689692 |
| -542286628 -597689692 |
| -542286628 -597499192 2700 593 |
| -542122662 -597596174 |
| -540483000 -598566000 1493 -2292 |
| -540146210 -600441001 |
| -540112531 -600628500 1001 1596 |
| -540146210 -600815999 |
| -540483000 -602691000 798 -1596 |
| -540146210 -604566001 |
| -540112531 -604753500 1001 1596 |
| -540146210 -604940999 |
| -540483000 -606816000 798 -1596 |
| -540146210 -608691001 |
| -540112531 -608878500 1001 1596 |
| -540146210 -609065999 |
| -540483000 -610941000 798 -1596 |
| -540146210 -612816001 |
| -540112531 -613003500 1001 1596 |
| -540146210 -613190999 |
| -540483000 -615066000 798 -1596 |
| -540146210 -616941001 |
| -540112531 -617128500 1001 1596 |
| -540146210 -617315999 |
| -540483000 -619191000 798 -1596 |
| -540146210 -621066001 |
| -540112531 -621253500 1001 1596 |
| -540146210 -621440999 |
| -540483000 -623316000 798 -1596 |
| -540146210 -625191001 |
| -540112531 -625378500 1001 1596 |
| -540146210 -625565999 |
| -540483000 -627441000 798 -1596 |
| -540146210 -629316001 |
| -540112531 -629503500 1001 1596 |
| -540146210 -629690999 |
| -540483000 -631566000 798 -1081 |
| -538806780 -632471175 |
| -538639159 -632561692 1516 1183 |
| -538639159 -632752192 |
| -538026628 -632752192 |
| -538026628 -632561692 2700 593 |
| -537862662 -632658674 |
| -536223000 -633628500 1493 -492 |
| -536559790 -631753499 |
| -536593469 -631566000 2801 1596 |
| -536559790 -631378501 |
| -536223000 -629503500 2598 -1596 |
| -536559790 -627628499 |
| -536593469 -627441000 2801 1596 |
| -536559790 -627253501 |
| -536223000 -625378500 2598 -1596 |
| -536559790 -623503499 |
| -536593469 -623316000 2801 1596 |
| -536559790 -623128501 |
| -536223000 -621253500 2598 -1596 |
| -536559790 -619378499 |
| -536593469 -619191000 2801 1596 |
| -536559790 -619003501 |
| -536223000 -617128500 2598 -1596 |
| -536559790 -615253499 |
| -536593469 -615066000 2801 1596 |
| -536559790 -614878501 |
| -536223000 -613003500 2598 -1596 |
| -536559790 -611128499 |
| -536593469 -610941000 2801 1596 |
| -536559790 -610753501 |
| -536223000 -608878500 2598 -1596 |
| -536559790 -607003499 |
| -536593469 -606816000 2801 1596 |
| -536559790 -606628501 |
| -536223000 -604753500 2598 -1596 |
| -536559790 -602878499 |
| -536593469 -602691000 2801 1596 |
| -536559790 -602503501 |
| -536223000 -600628500 2598 -1969 |
| -535353825 -598933333 |
| -535266908 -598763817 2428 1171 |
| -535076408 -598763817 |
| -535076408 -591041421 |
| -535266908 -591041421 0 1382 |
| -535409124 -590914674 |
| -538353000 -588291000 3182 -2296 |
| -538256965 -584348811 |
| -538252326 -584158368 2686 1363 |
| -538117622 -584023664 |
| -544679982 -577461304 |
| -544814686 -577596008 450 450 |
| -544814686 -577405508 |
| -555878992 -577405508 |
| -555878992 -577596008 900 900 |
| -556069492 -577596008 |
| -556069492 -579501000 |
| -556641000 -579501000 0 -900 |
| -556641000 -580072508 |
| -558927000 -580072508 |
| -558927000 -579501000 2700 -900 |
| -559498508 -579501000 |
| -559498508 -579424808 |
| -559689008 -579424808 0 900 |
| -559689008 -579234308 |
| -561228314 -579234308 |
| -561228314 -579424808 900 450 |
| -561363018 -579290104 |
| -564784357 -582711443 |
| -565404000 -582091800 3150 -450 |
| -565404000 -582968108 |
| -573862200 -582968108 |
| -573862200 -582091800 2700 -450 |
| -574481843 -582711443 |
| -575194629 -581998657 |
| -575329333 -582133361 450 559 |
| -575365500 -581946326 |
| -575691000 -580263000 2809 -218 |
| -576016500 -581946326 |
| -576052667 -582133361 790 559 |
| -576187371 -581998657 |
| -576900157 -582711443 |
| -577519800 -582091800 3150 -450 |
| -577519800 -582968108 |
| -581482200 -582968108 |
| -581482200 -582091800 2700 -450 |
| -582101843 -582711443 |
| -582814629 -581998657 |
| -582949333 -582133361 450 559 |
| -582985500 -581946326 |
| -583311000 -580263000 2809 -218 |
| -583636500 -581946326 |
| -583672667 -582133361 790 559 |
| -583807371 -581998657 |
| -584520157 -582711443 |
| -585139800 -582091800 3150 -450 |
| -585139800 -582968108 |
| -589102200 -582968108 |
| -589102200 -582091800 2700 -450 |
| -589721843 -582711443 |
| -590434629 -581998657 |
| -590569333 -582133361 450 559 |
| -590605500 -581946326 |
| -590931000 -580263000 2809 -1007 |
| -592645501 -580267969 |
| -592836000 -580268521 1 14 |
| -592645580 -580263000 |
| -592836000 -580257479 3583 14 |
| -592645501 -580258031 |
| -590931000 -580263000 1798 -484 |
| -592065523 -578977544 |
| -592191580 -578834716 3114 935 |
| -592056876 -578700012 |
| -592381184 -578375704 |
| -592515888 -578510408 450 450 |
| -592515888 -578319908 |
| -593994356 -578319908 |
| -593994356 -578510408 900 1569 |
| -594069020 -578685666 |
| -594741000 -580263000 669 -667 |
| -593026499 -580258031 |
| -592836000 -580257479 1801 14 |
| -593026420 -580263000 |
| -592836000 -580268521 1783 14 |
| -593026499 -580267969 |
| -594741000 -580263000 3598 -957 |
| -594917159 -581968434 |
| -594936732 -582157926 841 508 |
| -595071436 -582023222 |
| -598655257 -585607043 |
| -599274900 -584987400 3150 -450 |
| -599274900 -585863708 |
| -604395614 -585863708 |
| -604395614 -586054208 900 450 |
| -604530318 -585919504 |
| -606465757 -587854943 |
| -607085400 -587235300 3150 -450 |
| -607085400 -588111608 |
| -615696000 -588111608 |
| -615696000 -587235300 2700 -450 |
| -616315643 -587854943 |
| -623200482 -580970104 |
| -623335186 -581104808 450 450 |
| -623335186 -580914308 |
| -624087872 -580914308 |
| -624087872 -581104808 900 593 |
| -624251838 -581007826 |
| -625891500 -580038000 3293 -1392 |
| -627766501 -580374790 |
| -627954000 -580408469 101 1596 |
| -628141499 -580374790 |
| -630016500 -580038000 3498 -1596 |
| -631891501 -580374790 |
| -632079000 -580408469 101 1596 |
| -632266499 -580374790 |
| -634141500 -580038000 3498 -492 |
| -633171674 -581677662 |
| -633074692 -581841628 1206 593 |
| -633265192 -581841628 |
| -633265192 -582454159 |
| -633074692 -582454159 1800 1183 |
| -632984175 -582621780 |
| -632079000 -584298000 1183 -1081 |
| -630203999 -583961210 |
| -630016500 -583927531 1901 1596 |
| -629829001 -583961210 |
| -627954000 -584298000 1698 -1596 |
| -626078999 -583961210 |
| -625891500 -583927531 1901 1596 |
| -625704001 -583961210 |
| -623829000 -584298000 1698 -2768 |
| -624385570 -586119891 |
| -624441227 -586302079 730 1519 |
| -624575931 -586436783 |
| -624342829 -586669885 |
| -624962472 -587289528 450 -198 |
| -624168977 -586917665 |
| -623996480 -586836826 2051 198 |
| -624131184 -586971530 |
| -622587075 -588515639 |
| -622452371 -588380935 2250 538 |
| -622422964 -588569152 |
| -622173000 -590169000 988 -1500 |
| -621157564 -591430304 |
| -621038102 -591578692 1288 1411 |
| -621038102 -591769192 |
| -605844283 -591769192 |
| -605844283 -591578692 2700 559 |
| -605686455 -591685372 |
| -604266000 -592645500 1459 -2918 |
| -605686455 -593605628 |
| -605844283 -593712308 340 559 |
| -605844283 -593521808 |
| -623731500 -593521808 |
| -623731500 -592645500 2700 -450 |
| -624351143 -593265143 |
| -631423285 -586193001 |
| -631557989 -586327705 450 593 |
| -631605353 -586143187 |
| -632079000 -584298000 2843 -427 |
| -632984175 -585974220 |
| -633074692 -586141841 616 1183 |
| -633265192 -586141841 |
| -633265192 -587283614 |
| -633074692 -587283614 1800 450 |
| -633209396 -587418318 |
| -630588075 -590039639 |
| -630453371 -589904935 2250 538 |
| -630423964 -590093152 |
| -630174000 -591693000 988 -2877 |
| -631773848 -591443036 |
| -631962065 -591413629 3511 538 |
| -631827361 -591278925 |
| -634761143 -588345143 |
| -634141500 -587725500 2250 -270 |
| -634974931 -587996256 |
| -635156110 -588055115 179 1511 |
| -635343232 -588019398 |
| -636204000 -587855100 3491 -341 |
| -635584357 -588474743 |
| -635718896 -588609282 |
| -635584192 -588743986 1350 450 |
| -635774692 -588743986 |
| -635774692 -590114717 |
| -635584192 -590114717 1800 559 |
| -635690872 -590272545 |
| -636651000 -591693000 559 -2357 |
| -638365494 -591700027 |
| -638555992 -591700808 2 21 |
| -638365652 -591693000 |
| -638555992 -591685192 3576 21 |
| -638365494 -591685973 |
| -636651000 -591693000 1797 -557 |
| -637611128 -590272545 |
| -637717808 -590114717 3040 559 |
| -637527308 -590114717 |
| -637527308 -588302100 |
| -636651000 -588302100 1800 -450 |
| -637270643 -587682457 |
| -637136104 -587547918 |
| -637270808 -587413214 3150 450 |
| -637080308 -587413214 |
| -637080308 -586101628 |
| -637270808 -586101628 0 593 |
| -637173826 -585937662 |
| -636204000 -584298000 2393 -492 |
| -638079001 -584634790 |
| -638266500 -584668469 101 1596 |
| -638453999 -584634790 |
| -640329000 -584298000 3498 -492 |
| -639359174 -585937662 |
| -639262192 -586101628 1206 593 |
| -639452692 -586101628 |
| -639452692 -588017700 |
| -640329000 -588017700 0 -288 |
| -639561121 -588439929 |
| -639394192 -588531717 1511 288 |
| -639584692 -588531717 |
| -639584692 -589787992 |
| -639394192 -589787992 1800 900 |
| -639394192 -589978492 |
| -639318000 -589978492 |
| -639318000 -590550000 900 -900 |
| -638746492 -590550000 |
| -638746492 -591685192 |
| -638555992 -591685192 1800 23 |
| -638746332 -591693000 |
| -638555992 -591700808 1776 23 |
| -638746492 -591700808 |
| -638746492 -592836000 |
| -639318000 -592836000 0 -900 |
| -639318000 -593407508 |
| -641604000 -593407508 |
| -641604000 -592836000 2700 -900 |
| -642175508 -592836000 |
| -642175508 -590550000 |
| -641604000 -590550000 1800 -900 |
| -641604000 -589978492 |
| -641527808 -589978492 |
| -641527808 -589787992 2700 900 |
| -641337308 -589787992 |
| -641337308 -588149700 |
| -640461000 -588149700 1800 -288 |
| -641228879 -587727471 |
| -641395808 -587635683 3311 288 |
| -641205308 -587635683 |
| -641205308 -586101628 |
| -641395808 -586101628 0 593 |
| -641298826 -585937662 |
| -640329000 -584298000 2393 -2292 |
| -638453999 -583961210 |
| -638266500 -583927531 1901 1596 |
| -638079001 -583961210 |
| -636204000 -584298000 1698 -1081 |
| -635298825 -582621780 |
| -635208308 -582454159 2416 1183 |
| -635017808 -582454159 |
| -635017808 -581841628 |
| -635208308 -581841628 0 593 |
| -635111326 -581677662 |
| -634141500 -580038000 2393 -492 |
| -636016501 -580374790 |
| -636204000 -580408469 101 1596 |
| -636391499 -580374790 |
| -638266500 -580038000 3498 -2742 |
| -637792853 -578192813 |
| -637745489 -578008295 2556 593 |
| -637610785 -578142999 |
| -634310543 -574842757 |
| -633690900 -575462400 1350 -450 |
| -633690900 -574586092 |
| -584301600 -574586092 |
| -584301600 -575462400 900 -450 |
| -583681957 -574842757 |
| -579997371 -578527343 |
| -579862667 -578392639 2250 559 |
| -579826500 -578579674 |
| -579501000 -580263000 1009 -1007 |
| -577786499 -580258031 |
| -577596000 -580257479 1801 14 |
| -577786420 -580263000 |
| -577596000 -580268521 1783 14 |
| -577786499 -580267969 |
| -579501000 -580263000 3598 -135 |
| -577835074 -580668250 |
| -577649972 -580713278 1663 1486 |
| -577515268 -580847982 |
| -577426657 -580759371 |
| -577561361 -580624667 3150 559 |
| -577374326 -580588500 |
| -575691000 -580263000 1909 -107 |
| -577405501 -580267969 |
| -577596000 -580268521 1 14 |
| -577405580 -580263000 |
| -577596000 -580257479 3583 14 |
| -577405501 -580258031 |
| -575691000 -580263000 1798 -1796 |
| -573976499 -580258031 |
| -573786000 -580257479 1801 14 |
| -573976420 -580263000 |
| -573786000 -580268521 1783 14 |
| -573976499 -580267969 |
| -575691000 -580263000 3598 -107 |
| -574007674 -580588500 |
| -573820639 -580624667 1690 559 |
| -573955343 -580759371 |
| -573866732 -580847982 |
| -573732028 -580713278 2250 1486 |
| -573546926 -580668250 |
| -571881000 -580263000 1936 -135 |
| -573595501 -580267969 |
| -573786000 -580268521 1 14 |
| -573595580 -580263000 |
| -573786000 -580257479 3583 14 |
| -573595501 -580258031 |
| -571881000 -580263000 1798 -1457 |
| -570460545 -579302872 |
| -570302717 -579196192 2140 559 |
| -570302717 -579386692 |
| -567598486 -579386692 |
| -567598486 -579196192 2700 450 |
| -567463782 -579330896 |
| -564042443 -575909557 |
| -563422800 -576529200 1350 -450 |
| -563422800 -575652892 |
| -544372800 -575652892 |
| -544372800 -576529200 900 -450 |
| -543753157 -575909557 |
| -533580457 -586082257 |
| -534200100 -586701900 450 -450 |
| -533323792 -586701900 |
| -533323792 -637753500 |
| -533323792 -639855600 |
| -534200100 -639855600 0 -450 |
| -533580457 -640475243 |
| -534327999 -641222785 |
| -534193295 -641357489 1350 593 |
| -534377813 -641404853 |
| -536223000 -641878500 143 -942 |
| -535886210 -643753501 |
| -535852531 -643941000 1001 1596 |
| -535886210 -644128499 |
| -536223000 -646003500 798 -2292 |
| -537862662 -646973326 |
| -538026628 -647070308 306 593 |
| -538026628 -646879808 |
| -538639159 -646879808 |
| -538639159 -647070308 900 1183 |
| -538806780 -647160825 |
| -540483000 -648066000 283 -1327 |
| -540956647 -649911187 |
| -541004011 -650095705 756 593 |
| -541138715 -649961001 |
| -567699010 -676521296 |
| -567564306 -676656000 1350 1350 |
| -567564306 -676846500 |
| -525399000 -676846500 |
| -525399000 -676656000 2700 900 |
| -525208500 -676656000 |
| ANP000089 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -559498508 -585978000 |
| -556069492 -585978000 |
| ANP000090 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 67 52 381000 1 |
| -581596420 -591693000 |
| -581406000 -591698521 1783 14 |
| -581596499 -591697969 |
| -583311000 -591693000 3598 -1007 |
| -583636500 -593376326 |
| -583672667 -593563361 790 559 |
| -583807371 -593428657 |
| -586958557 -596579843 |
| -587578200 -595960200 3150 -450 |
| -587578200 -596836508 |
| -591898814 -596836508 |
| -591898814 -597027008 900 450 |
| -592033518 -596892304 |
| -605768843 -610627629 |
| -605634139 -610762333 1350 559 |
| -605821174 -610798500 |
| -607504500 -611124000 109 -2918 |
| -607179000 -609440674 |
| -607142833 -609253639 2590 559 |
| -607008129 -609388343 |
| -597432158 -599812372 |
| -597566862 -599677668 3150 1533 |
| -597626940 -599496889 |
| -597903300 -598665300 2883 -183 |
| -597903300 -599541608 |
| -600699914 -599541608 |
| -600699914 -599732108 900 450 |
| -600834618 -599597404 |
| -605768843 -604531629 |
| -605634139 -604666333 1350 559 |
| -605821174 -604702500 |
| -607504500 -605028000 109 -2918 |
| -607179000 -603344674 |
| -607142833 -603157639 2590 559 |
| -607008129 -603292343 |
| -601761443 -598045657 |
| -601141800 -598665300 1350 -450 |
| -601141800 -597788992 |
| -598345186 -597788992 |
| -598345186 -597598492 2700 450 |
| -598210482 -597733196 |
| -594156018 -593678732 |
| -594290722 -593544028 3150 1486 |
| -594335750 -593358926 |
| -594741000 -591693000 2836 -1034 |
| -596455494 -591700027 |
| -596645992 -591700808 2 21 |
| -596455652 -591693000 |
| -596645992 -591685192 3576 21 |
| -596455494 -591685973 |
| -594741000 -591693000 1797 -1795 |
| -593026499 -591688031 |
| -592836000 -591687479 1801 14 |
| -593026420 -591693000 |
| -592836000 -591698521 1783 14 |
| -593026499 -591697969 |
| -594741000 -591693000 3598 -135 |
| -593075074 -592098250 |
| -592889972 -592143278 1663 1486 |
| -592755268 -592277982 |
| -592666657 -592189371 |
| -592801361 -592054667 3150 559 |
| -592614326 -592018500 |
| -590931000 -591693000 1909 -107 |
| -592645501 -591697969 |
| -592836000 -591698521 1 14 |
| -592645580 -591693000 |
| -592836000 -591687479 3583 14 |
| -592645501 -591688031 |
| -590931000 -591693000 1798 -1796 |
| -589216499 -591688031 |
| -589026000 -591687479 1801 14 |
| -589216420 -591693000 |
| -589026000 -591698521 1783 14 |
| -589216499 -591697969 |
| -590931000 -591693000 3598 -1007 |
| -591256500 -593376326 |
| -591292667 -593563361 790 559 |
| -591427371 -593428657 |
| -592811842 -594813128 |
| -592677138 -594947832 1350 1533 |
| -592617060 -595128611 |
| -592340700 -595960200 1083 -183 |
| -592340700 -595083892 |
| -588020086 -595083892 |
| -588020086 -594893392 2700 450 |
| -587885382 -595028096 |
| -586536018 -593678732 |
| -586670722 -593544028 3150 1486 |
| -586715750 -593358926 |
| -587121000 -591693000 2836 -1035 |
| -588835501 -591697969 |
| -589026000 -591698521 1 14 |
| -588835580 -591693000 |
| -589026000 -591687479 3583 14 |
| -588835501 -591688031 |
| -587121000 -591693000 1798 -1796 |
| -585406499 -591688031 |
| -585216000 -591687479 1801 14 |
| -585406420 -591693000 |
| -585216000 -591698521 1783 14 |
| -585406499 -591697969 |
| -587121000 -591693000 3598 -135 |
| -585455074 -592098250 |
| -585269972 -592143278 1663 1486 |
| -585135268 -592277982 |
| -585046657 -592189371 |
| -585181361 -592054667 3150 559 |
| -584994326 -592018500 |
| -583311000 -591693000 1909 -107 |
| -585025501 -591697969 |
| -585216000 -591698521 1 14 |
| -585025580 -591693000 |
| -585216000 -591687479 3583 14 |
| -585025501 -591688031 |
| -583311000 -591693000 1798 -1796 |
| -581596499 -591688031 |
| -581406000 -591687479 1801 14 |
| -581596420 -591693000 |
| ANP000091 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 194 141 381000 1 |
| -573976420 -591693000 |
| -573786000 -591698521 1783 14 |
| -573976499 -591697969 |
| -575691000 -591693000 3598 -1007 |
| -576016500 -593376326 |
| -576052667 -593563361 790 559 |
| -576187371 -593428657 |
| -583339057 -600580343 |
| -583958700 -599960700 3150 -450 |
| -583958700 -600837008 |
| -590260514 -600837008 |
| -590260514 -601027508 900 450 |
| -590395218 -600892804 |
| -605873248 -616370834 |
| -605738544 -616505538 1350 670 |
| -605915139 -616576984 |
| -607504500 -617220000 220 -456 |
| -605933123 -617905793 |
| -605758526 -617981992 1564 1135 |
| -605758526 -618172492 |
| -604822186 -618172492 |
| -604822186 -617981992 2700 450 |
| -604687482 -618116696 |
| -595905157 -609334371 |
| -596039861 -609199667 3150 559 |
| -595852826 -609163500 |
| -594169500 -608838000 1909 -2918 |
| -594495000 -610521326 |
| -594531167 -610708361 790 559 |
| -594665871 -610573657 |
| -602930102 -618837888 |
| -602795398 -618972592 1350 1350 |
| -602795398 -619163092 |
| -600478786 -619163092 |
| -600478786 -618972592 2700 450 |
| -600344082 -619107296 |
| -595905157 -614668371 |
| -596039861 -614533667 3150 559 |
| -595852826 -614497500 |
| -594169500 -614172000 1909 -2918 |
| -594495000 -615855326 |
| -594531167 -616042361 790 559 |
| -594665871 -615907657 |
| -597062702 -618304488 |
| -596927998 -618439192 1350 1350 |
| -596927998 -618629692 |
| -595747783 -618629692 |
| -595747783 -618439192 2700 559 |
| -595589955 -618545872 |
| -594169500 -619506000 1459 -2918 |
| -595589955 -620466128 |
| -595747783 -620572808 340 559 |
| -595747783 -620382308 |
| -596547014 -620382308 |
| -596547014 -620572808 900 450 |
| -596681718 -620438104 |
| -597893257 -621649643 |
| -598512900 -621030000 3150 -450 |
| -598512900 -621906308 |
| -621845398 -621906308 |
| -621845398 -622096808 900 1350 |
| -621980102 -622231512 |
| -620303718 -623907896 |
| -620169014 -623773192 2250 450 |
| -620169014 -623963692 |
| -595747783 -623963692 |
| -595747783 -623773192 2700 559 |
| -595589955 -623879872 |
| -594169500 -624840000 1459 -2918 |
| -595589955 -625800128 |
| -595747783 -625906808 340 559 |
| -595747783 -625716308 |
| -619445098 -625716308 |
| -619445098 -625906808 900 1350 |
| -619579802 -626041512 |
| -613636218 -631985096 |
| -613501514 -631850392 2250 450 |
| -613501514 -632040892 |
| -612724200 -632040892 |
| -612724200 -632917200 900 -450 |
| -612104557 -632297557 |
| -596227971 -648174143 |
| -596093267 -648039439 2250 559 |
| -596057100 -648226474 |
| -595731600 -649909800 1009 -1007 |
| -594017099 -649904831 |
| -593826600 -649904279 1801 14 |
| -594017020 -649909800 |
| -593826600 -649915321 1783 14 |
| -594017099 -649914769 |
| -595731600 -649909800 3598 -46 |
| -594023197 -650054352 |
| -593833375 -650070413 1751 1398 |
| -593698671 -650205117 |
| -593686140 -650192586 |
| -593820844 -650057882 3150 494 |
| -593630920 -650043074 |
| -591921600 -649909800 1844 -42 |
| -593636101 -649914769 |
| -593826600 -649915321 1 14 |
| -593636180 -649909800 |
| -593826600 -649904279 3583 14 |
| -593636101 -649904831 |
| -591921600 -649909800 1798 -1392 |
| -590618689 -648795367 |
| -590473922 -648671542 2205 494 |
| -590473922 -648862042 |
| -588586404 -648862042 |
| -588586404 -648671542 2700 450 |
| -588451700 -648806246 |
| -585385377 -645739923 |
| -584644500 -646480800 1350 -450 |
| -584644500 -645433042 |
| -582244078 -645433042 |
| -582244078 -645242542 2700 494 |
| -582099311 -645366367 |
| -580796400 -646480800 1394 -2789 |
| -582099311 -647595233 |
| -582244078 -647719058 405 494 |
| -582244078 -647528558 |
| -584131596 -647528558 |
| -584131596 -647719058 900 450 |
| -584266300 -647584354 |
| -587332623 -650650677 |
| -588073500 -649909800 3150 -450 |
| -588073500 -650957558 |
| -590473922 -650957558 |
| -590473922 -651148058 900 494 |
| -590618689 -651024233 |
| -591921600 -649909800 3194 -539 |
| -592054874 -651619120 |
| -592069682 -651809044 855 494 |
| -592204386 -651674340 |
| -593180973 -652650927 |
| -593921850 -651910050 3150 -450 |
| -593921850 -652957808 |
| -620396516 -652957808 |
| -620396516 -651910050 2700 -450 |
| -621137393 -652650927 |
| -622508266 -651280054 |
| -622642970 -651414758 450 450 |
| -622642970 -651224258 |
| -623506622 -651224258 |
| -623506622 -651414758 900 494 |
| -623651389 -651290933 |
| -624954300 -650176500 3194 -539 |
| -625087574 -651885820 |
| -625102382 -652075744 855 494 |
| -625237086 -651941040 |
| -626213673 -652917627 |
| -626954550 -652176750 3150 -450 |
| -626954550 -653224508 |
| -658067250 -653224508 |
| -658067250 -652176750 2700 -450 |
| -658808127 -652917627 |
| -661723496 -650002258 |
| -661858200 -650136962 450 537 |
| -661887273 -649948693 |
| -662178000 -648066000 2787 -1271 |
| -663854220 -647160825 |
| -664021841 -647070308 3316 1183 |
| -664021841 -646879808 |
| -664409372 -646879808 |
| -664409372 -647070308 900 593 |
| -664573338 -646973326 |
| -666213000 -646003500 3293 -2292 |
| -666549790 -644128499 |
| -666583469 -643941000 2801 1596 |
| -666549790 -643753501 |
| -666213000 -641878500 2598 -1596 |
| -666549790 -640003499 |
| -666583469 -639816000 2801 1596 |
| -666549790 -639628501 |
| -666213000 -637753500 2598 -1596 |
| -666549790 -635878499 |
| -666583469 -635691000 2801 1596 |
| -666549790 -635503501 |
| -666213000 -633628500 2598 -1596 |
| -666549790 -631753499 |
| -666583469 -631566000 2801 1596 |
| -666549790 -631378501 |
| -666213000 -629503500 2598 -1596 |
| -666549790 -627628499 |
| -666583469 -627441000 2801 1596 |
| -666549790 -627253501 |
| -666213000 -625378500 2598 -1596 |
| -666549790 -623503499 |
| -666583469 -623316000 2801 1596 |
| -666549790 -623128501 |
| -666213000 -621253500 2598 -1596 |
| -666549790 -619378499 |
| -666583469 -619191000 2801 1596 |
| -666549790 -619003501 |
| -666213000 -617128500 2598 -1596 |
| -666549790 -615253499 |
| -666583469 -615066000 2801 1596 |
| -666549790 -614878501 |
| -666213000 -613003500 2598 -1596 |
| -666549790 -611128499 |
| -666583469 -610941000 2801 1596 |
| -666549790 -610753501 |
| -666213000 -608878500 2598 -1596 |
| -666549790 -607003499 |
| -666583469 -606816000 2801 1596 |
| -666549790 -606628501 |
| -666213000 -604753500 2598 -1596 |
| -666549790 -602878499 |
| -666583469 -602691000 2801 1596 |
| -666549790 -602503501 |
| -666213000 -600628500 2598 -3396 |
| -665876210 -602503501 |
| -665842531 -602691000 1001 1596 |
| -665876210 -602878499 |
| -666213000 -604753500 798 -492 |
| -664573338 -603783674 |
| -664409372 -603686692 2106 593 |
| -664409372 -603877192 |
| -664021841 -603877192 |
| -664021841 -603686692 2700 1183 |
| -663854220 -603596175 |
| -662178000 -602691000 2083 -1081 |
| -662514790 -600815999 |
| -662548469 -600628500 2801 1596 |
| -662514790 -600441001 |
| -662178000 -598566000 2598 -3396 |
| -661841210 -600441001 |
| -661807531 -600628500 1001 1596 |
| -661841210 -600815999 |
| -662178000 -602691000 798 -492 |
| -660538338 -601721174 |
| -660374372 -601624192 2106 593 |
| -660374372 -601814692 |
| -643747486 -601814692 |
| -643747486 -601624192 2700 450 |
| -643612782 -601758896 |
| -640166243 -598312357 |
| -639546600 -598932000 1350 -450 |
| -639546600 -598055692 |
| -622417783 -598055692 |
| -622417783 -597865192 2700 559 |
| -622259955 -597971872 |
| -620839500 -598932000 1459 -2918 |
| -622259955 -599892128 |
| -622417783 -599998808 340 559 |
| -622417783 -599808308 |
| -639104714 -599808308 |
| -639104714 -599998808 900 450 |
| -639239418 -599864104 |
| -642685957 -603310643 |
| -643305600 -602691000 3150 -239 |
| -642991005 -603508891 |
| -642922616 -603686692 1110 1589 |
| -642922616 -603877192 |
| -642069000 -603877192 |
| -642069000 -604753500 900 -420 |
| -641482193 -604102675 |
| -641354628 -603961192 2279 420 |
| -641354628 -604151692 |
| -622417783 -604151692 |
| -622417783 -603961192 2700 559 |
| -622259955 -604067872 |
| -620839500 -605028000 1459 -2918 |
| -622259955 -605988128 |
| -622417783 -606094808 340 559 |
| -622417783 -605904308 |
| -627560398 -605904308 |
| -627560398 -606094808 900 1350 |
| -627695102 -606229512 |
| -623732718 -610191896 |
| -623598014 -610057192 2250 450 |
| -623598014 -610247692 |
| -622417783 -610247692 |
| -622417783 -610057192 2700 559 |
| -622259955 -610163872 |
| -620839500 -611124000 1459 -2918 |
| -622259955 -612084128 |
| -622417783 -612190808 340 559 |
| -622417783 -612000308 |
| -624039900 -612000308 |
| -624039900 -611124000 2700 -218 |
| -624365622 -611937524 |
| -624436431 -612114375 681 1568 |
| -624571135 -612249079 |
| -621335871 -615484343 |
| -621201167 -615349639 2250 559 |
| -621165000 -615536674 |
| -620839500 -617220000 1009 -1245 |
| -619268123 -617905793 |
| -619093526 -617981992 1564 1135 |
| -619093526 -618172492 |
| -609250474 -618172492 |
| -609250474 -617981992 2700 1135 |
| -609075877 -617905793 |
| -607504500 -617220000 2035 -1117 |
| -607560203 -615506397 |
| -607566392 -615315998 2718 431 |
| -607431688 -615450702 |
| -591322043 -599341057 |
| -590702400 -599960700 1350 -450 |
| -590702400 -599084392 |
| -584400586 -599084392 |
| -584400586 -598893892 2700 450 |
| -584265882 -599028596 |
| -578916018 -593678732 |
| -579050722 -593544028 3150 1486 |
| -579095750 -593358926 |
| -579501000 -591693000 2836 -1035 |
| -581215501 -591697969 |
| -581406000 -591698521 1 14 |
| -581215580 -591693000 |
| -581406000 -591687479 3583 14 |
| -581215501 -591688031 |
| -579501000 -591693000 1798 -1796 |
| -577786499 -591688031 |
| -577596000 -591687479 1801 14 |
| -577786420 -591693000 |
| -577596000 -591698521 1783 14 |
| -577786499 -591697969 |
| -579501000 -591693000 3598 -135 |
| -577835074 -592098250 |
| -577649972 -592143278 1663 1486 |
| -577515268 -592277982 |
| -577426657 -592189371 |
| -577561361 -592054667 3150 559 |
| -577374326 -592018500 |
| -575691000 -591693000 1909 -107 |
| -577405501 -591697969 |
| -577596000 -591698521 1 14 |
| -577405580 -591693000 |
| -577596000 -591687479 3583 14 |
| -577405501 -591688031 |
| -575691000 -591693000 1798 -1796 |
| -573976499 -591688031 |
| -573786000 -591687479 1801 14 |
| -573976420 -591693000 |
| ANP000092 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -573595501 -591688031 |
| -571881000 -591693000 1798 -3596 |
| -573595501 -591697969 |
| -573786000 -591698521 1 14 |
| -573595580 -591693000 |
| -573786000 -591687479 3583 14 |
| -573595501 -591688031 |
| ANP000093 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 36 23 381000 1 |
| -562127392 -599846400 |
| -562127392 -602132400 |
| -562698900 -602132400 0 -900 |
| -562698900 -602703908 |
| -563834092 -602703908 |
| -563834092 -602894408 900 23 |
| -563841900 -602704068 |
| -563849708 -602894408 876 23 |
| -563849708 -602703908 |
| -564238214 -602703908 |
| -564238214 -602894408 900 450 |
| -564372918 -602759704 |
| -564426882 -602813668 |
| -564292178 -602948372 1350 1486 |
| -564247150 -603133474 |
| -563841900 -604799400 1036 -134 |
| -563848927 -603084906 |
| -563849708 -602894408 2702 21 |
| -563841900 -603084748 |
| -563834092 -602894408 2676 21 |
| -563834873 -603084906 |
| -563841900 -604799400 897 -1795 |
| -563836931 -606513901 |
| -563836379 -606704400 901 14 |
| -563841900 -606513980 |
| -563847421 -606704400 883 14 |
| -563846869 -606513901 |
| -563841900 -604799400 2698 -1035 |
| -565507826 -604394150 |
| -565692928 -604349122 3463 1486 |
| -565827632 -604214418 |
| -567298957 -605685743 |
| -567918600 -605066100 3150 -450 |
| -567918600 -605942408 |
| -576620714 -605942408 |
| -576620714 -606132908 900 450 |
| -576755418 -605998204 |
| -579098843 -608341629 |
| -578964139 -608476333 1350 559 |
| -579151174 -608512500 |
| -580834500 -608838000 109 -2918 |
| -580509000 -607154674 |
| -580472833 -606967639 2590 559 |
| -580338129 -607102343 |
| -577682243 -604446457 |
| -577062600 -605066100 1350 -450 |
| -577062600 -604189792 |
| -568360486 -604189792 |
| -568360486 -603999292 2700 450 |
| -568225782 -604133996 |
| -565612204 -601520418 |
| -565746908 -601385714 3150 450 |
| -565556408 -601385714 |
| -565556408 -599846400 |
| -564984900 -599846400 1800 -900 |
| -564984900 -599274892 |
| -562698900 -599274892 |
| -562698900 -599846400 900 -900 |
| -562127392 -599846400 |
| ANP000094 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -606894899 |
| -563841900 -608609400 898 -1796 |
| -563836931 -610323901 |
| -563836379 -610514400 901 14 |
| -563841900 -610323980 |
| -563847421 -610514400 883 14 |
| -563846869 -610323901 |
| -563841900 -608609400 2698 -557 |
| -565262355 -609569528 |
| -565420183 -609676208 340 559 |
| -565420183 -609485708 |
| -566829014 -609485708 |
| -566829014 -609676208 900 450 |
| -566963718 -609541504 |
| -572213857 -614791643 |
| -572833500 -614172000 3150 -450 |
| -572833500 -615048308 |
| -579256217 -615048308 |
| -579256217 -615238808 900 559 |
| -579414045 -615132128 |
| -580834500 -614172000 3259 -2918 |
| -579414045 -613211872 |
| -579256217 -613105192 2140 559 |
| -579256217 -613295692 |
| -573275386 -613295692 |
| -573275386 -613105192 2700 450 |
| -573140682 -613239896 |
| -567890543 -607989757 |
| -567270900 -608609400 1350 -450 |
| -567270900 -607733092 |
| -565420183 -607733092 |
| -565420183 -607542592 2700 559 |
| -565262355 -607649272 |
| -563841900 -608609400 1459 -557 |
| -563846869 -606894899 |
| -563847421 -606704400 2701 14 |
| -563841900 -606894820 |
| -563836379 -606704400 2683 14 |
| -563836931 -606894899 |
| ANP000095 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -610704899 |
| -563841900 -612419400 898 -1796 |
| -563836931 -614133901 |
| -563836379 -614324400 901 14 |
| -563841900 -614133980 |
| -563847421 -614324400 883 14 |
| -563846869 -614133901 |
| -563841900 -612419400 2698 -1796 |
| -563846869 -610704899 |
| -563847421 -610514400 2701 14 |
| -563841900 -610704820 |
| -563836379 -610514400 2683 14 |
| -563836931 -610704899 |
| ANP000096 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -614514899 |
| -563841900 -616229400 898 -1796 |
| -563836931 -617943901 |
| -563836379 -618134400 901 14 |
| -563841900 -617943980 |
| -563847421 -618134400 883 14 |
| -563846869 -617943901 |
| -563841900 -616229400 2698 -557 |
| -565262355 -617189528 |
| -565420183 -617296208 340 559 |
| -565420183 -617105708 |
| -569115014 -617105708 |
| -569115014 -617296208 900 450 |
| -569249718 -617161504 |
| -572213857 -620125643 |
| -572833500 -619506000 3150 -450 |
| -572833500 -620382308 |
| -579256217 -620382308 |
| -579256217 -620572808 900 559 |
| -579414045 -620466128 |
| -580834500 -619506000 3259 -2918 |
| -579414045 -618545872 |
| -579256217 -618439192 2140 559 |
| -579256217 -618629692 |
| -573275386 -618629692 |
| -573275386 -618439192 2700 450 |
| -573140682 -618573896 |
| -570176543 -615609757 |
| -569556900 -616229400 1350 -450 |
| -569556900 -615353092 |
| -565420183 -615353092 |
| -565420183 -615162592 2700 559 |
| -565262355 -615269272 |
| -563841900 -616229400 1459 -557 |
| -563846869 -614514899 |
| -563847421 -614324400 2701 14 |
| -563841900 -614514820 |
| -563836379 -614324400 2683 14 |
| -563836931 -614514899 |
| ANP000097 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -618324899 |
| -563841900 -620039400 898 -1796 |
| -563836931 -621753901 |
| -563836379 -621944400 901 14 |
| -563841900 -621753980 |
| -563847421 -621944400 883 14 |
| -563846869 -621753901 |
| -563841900 -620039400 2698 -1796 |
| -563846869 -618324899 |
| -563847421 -618134400 2701 14 |
| -563841900 -618324820 |
| -563836379 -618134400 2683 14 |
| -563836931 -618324899 |
| ANP000098 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -622134899 |
| -563841900 -623849400 898 -1796 |
| -563836931 -625563901 |
| -563836379 -625754400 901 14 |
| -563841900 -625563980 |
| -563847421 -625754400 883 14 |
| -563846869 -625563901 |
| -563841900 -623849400 2698 -557 |
| -565262355 -624809528 |
| -565420183 -624916208 340 559 |
| -565420183 -624725708 |
| -571401014 -624725708 |
| -571401014 -624916208 900 450 |
| -571535718 -624781504 |
| -572213857 -625459643 |
| -572833500 -624840000 3150 -450 |
| -572833500 -625716308 |
| -579256217 -625716308 |
| -579256217 -625906808 900 559 |
| -579414045 -625800128 |
| -580834500 -624840000 3259 -2918 |
| -579414045 -623879872 |
| -579256217 -623773192 2140 559 |
| -579256217 -623963692 |
| -573275386 -623963692 |
| -573275386 -623773192 2700 450 |
| -573140682 -623907896 |
| -572462543 -623229757 |
| -571842900 -623849400 1350 -450 |
| -571842900 -622973092 |
| -565420183 -622973092 |
| -565420183 -622782592 2700 559 |
| -565262355 -622889272 |
| -563841900 -623849400 1459 -557 |
| -563846869 -622134899 |
| -563847421 -621944400 2701 14 |
| -563841900 -622134820 |
| -563836379 -621944400 2683 14 |
| -563836931 -622134899 |
| ANP000099 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -658341000 |
| -660139642 -658341000 |
| ANP000100 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -669036000 |
| -663964492 -669036000 |
| ANP000101 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -563836931 -625944899 |
| -563841900 -627659400 898 -3596 |
| -563846869 -625944899 |
| -563847421 -625754400 2701 14 |
| -563841900 -625944820 |
| -563836379 -625754400 2683 14 |
| -563836931 -625944899 |
| ANP000102 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 20 11 381000 1 |
| -596836332 -591693000 |
| -596645992 -591700808 1776 23 |
| -596836492 -591700808 |
| -596836492 -592836000 |
| -597408000 -592836000 0 -900 |
| -597408000 -593407508 |
| -598947314 -593407508 |
| -598947314 -593598008 900 450 |
| -599082018 -593463304 |
| -605170357 -599551643 |
| -605790000 -598932000 3150 -450 |
| -605790000 -599808308 |
| -605926217 -599808308 |
| -605926217 -599998808 900 559 |
| -606084045 -599892128 |
| -607504500 -598932000 3259 -2853 |
| -606203089 -597815815 |
| -606058489 -597691795 2206 943 |
| -605923785 -597826499 |
| -600321304 -592224018 |
| -600456008 -592089314 3150 450 |
| -600265508 -592089314 |
| -600265508 -590550000 |
| -599694000 -590550000 1800 -900 |
| -599694000 -589978492 |
| -597408000 -589978492 |
| -597408000 -590550000 900 -900 |
| -596836492 -590550000 |
| -596836492 -591685192 |
| -596645992 -591685192 1800 23 |
| -596836332 -591693000 |
| ANP000103 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -577596000 |
| -663964492 -577596000 |
| ANP000104 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -588291000 |
| -660139642 -588291000 |
| ANP000105 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -654502358 -582168000 |
| -646615642 -582168000 |
| ANP000106 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -577596000 |
| -528328492 -577596000 |
| ANP000107 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -552406931 -625944899 |
| -552411900 -627659400 898 -3596 |
| -552416869 -625944899 |
| -552417421 -625754400 2701 14 |
| -552411900 -625944820 |
| -552406379 -625754400 2683 14 |
| -552406931 -625944899 |
| ANP000108 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -542296358 -658341000 |
| -534409642 -658341000 |
| ANP000109 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -669036000 |
| -528328492 -669036000 |
| HP27860889 POUROUT 25527000 115824000 1 0 |
| POLY 3 0 381000 1 |
| 0 0 |
| 0 762000 |
| 0 0 |
| *TESTPOINT* |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| DFT_CONFIGURATION PARENT |
| { |
| UNITS MILS |
| PROBING_STRATEGY PARENT |
| { |
| PROBE_TOP_SIDE NO |
| PROBE_VIAS YES |
| PROBE_NO_CONNECT NO |
| } |
| DFT_RULES PARENT |
| { |
| PROBE 100 |
| { |
| DRILL_SIZE 69 |
| ENABLE YES |
| } |
| PROBE 75 |
| { |
| DRILL_SIZE 43 |
| ENABLE NO |
| } |
| PROBE 50 |
| { |
| DRILL_SIZE 30 |
| ENABLE NO |
| } |
| MIN_VIA_SIZE 25 |
| MIN_PAD_SIZE 25 |
| PIN_TO_PIN 14 |
| PIN_TO_BOARD 125 |
| PIN_TO_COMPONENT 0 |
| } |
| DIF_FILE PARENT |
| { |
| VIA_PREFIX VIA |
| TP_PART_TYPE TP100 |
| TP_PART_TYPE TP150 |
| TP_PREFIX TP |
| TP_PREFIX PN_TP |
| TP_PREFIX TP_SMD |
| TH_PART_TYPE MTHOLE1 |
| TH_PART_TYPE MTHOLE2 |
| TH_PREFIX TH |
| TH_PREFIX MH |
| NC_NET N.C. |
| INCLUDE_TP YES |
| } |
| RETURN_OPTIONS PARENT |
| { |
| AUTO_RETURN YES |
| ADD_TP_VIAS_ON_RETURN NO |
| ADD_MULTIPLE_FOR_POWERNET NO |
| TP_VIA_TYPE STANDARDVIA |
| PPCB_NOT_CONNECTED_NET_NAME NOT_CONNECTED |
| } |
| } |
| LAYER DATA |
| { |
| LAYER 0 |
| { |
| LAYER_THICKNESS 0 |
| DIELECTRIC 3.300000 |
| } |
| LAYER 1 |
| { |
| LAYER_NAME Top |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION HORIZONTAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Top |
| ASSOCIATED_PASTE_MASK Paste Mask Top |
| ASSOCIATED_SOLDER_MASK Solder Mask Top |
| ASSOCIATED_ASSEMBLY Assembly Drawing Top |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 3 |
| VIA 3 |
| PAD 3 |
| COPPER 3 |
| 2DLINE 3 |
| TEXT 3 |
| ERROR 5 |
| TOPCOMPONENT 1 |
| BOTTOMCOMPONENT 0 |
| REFDES 1 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 381000 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 4.300000 |
| COST 0 |
| } |
| LAYER 2 |
| { |
| LAYER_NAME Bottom |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION VERTICAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Bottom |
| ASSOCIATED_PASTE_MASK Paste Mask Bottom |
| ASSOCIATED_SOLDER_MASK Solder Mask Bottom |
| ASSOCIATED_ASSEMBLY Assembly Drawing Bottom |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 11 |
| VIA 11 |
| PAD 11 |
| COPPER 11 |
| 2DLINE 11 |
| TEXT 11 |
| ERROR 13 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 14 |
| REFDES 14 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 3.300000 |
| COST 0 |
| } |
| LAYER 3 |
| { |
| LAYER_NAME Layer_3 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 4 |
| { |
| LAYER_NAME Layer_4 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 5 |
| { |
| LAYER_NAME Layer_5 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 6 |
| { |
| LAYER_NAME Layer_6 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 7 |
| { |
| LAYER_NAME Layer_7 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 8 |
| { |
| LAYER_NAME Layer_8 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 9 |
| { |
| LAYER_NAME Layer_9 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 10 |
| { |
| LAYER_NAME Layer_10 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 11 |
| { |
| LAYER_NAME Layer_11 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 12 |
| { |
| LAYER_NAME Layer_12 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 13 |
| { |
| LAYER_NAME Layer_13 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 14 |
| { |
| LAYER_NAME Layer_14 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 15 |
| { |
| LAYER_NAME Layer_15 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 16 |
| { |
| LAYER_NAME Layer_16 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 17 |
| { |
| LAYER_NAME Layer_17 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 18 |
| { |
| LAYER_NAME Layer_18 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 19 |
| { |
| LAYER_NAME Layer_19 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 20 |
| { |
| LAYER_NAME Layer_20 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 21 |
| { |
| LAYER_NAME Solder Mask Top |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 22 |
| { |
| LAYER_NAME Paste Mask Bottom |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 23 |
| { |
| LAYER_NAME Paste Mask Top |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 24 |
| { |
| LAYER_NAME Drill Drawing |
| LAYER_TYPE DRILL |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 5 |
| TEXT 5 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 25 |
| { |
| LAYER_NAME Layer_25 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 26 |
| { |
| LAYER_NAME Silkscreen Top |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 27 |
| { |
| LAYER_NAME Assembly Drawing Top |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 28 |
| { |
| LAYER_NAME Solder Mask Bottom |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 29 |
| { |
| LAYER_NAME Silkscreen Bottom |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 30 |
| { |
| LAYER_NAME Assembly Drawing Bottom |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| } |
| SELECTABILITY DATA |
| { |
| PARTS Y |
| PINS Y |
| TRACES Y |
| VIAS Y |
| TACKS Y |
| UNROUTED Y |
| EDGES Y |
| NODES Y |
| SHAPES Y |
| DIMENSIONS Y |
| TEXT Y |
| AREA_PARTS Y |
| AREA_PINS Y |
| AREA_TRACES Y |
| AREA_VIAS Y |
| AREA_TACKS Y |
| AREA_UNROUTED Y |
| AREA_EDGES Y |
| AREA_NODES Y |
| AREA_SHAPES Y |
| AREA_DIMENSIONS Y |
| AREA_TEXT Y |
| } |
| VISIBILITY DATA |
| { |
| PADS Y |
| TRACKS Y |
| VIAS Y |
| COPPER Y |
| LINES Y |
| TEXT Y |
| ERRORS Y |
| CLUSTER Y |
| TOP_COMPONENT Y |
| BOTTOM_COMPONENT Y |
| PLANE_THERMAL Y |
| REFDES Y |
| PARTTYPES Y |
| ATTRIBUTES Y |
| KEEPOUTS Y |
| SELECTION_COLOR 15 |
| HIGHLIGHT_COLOR 14 |
| FIXED_COLOR 3 |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION PARENT |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 609600 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| NET GND |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 952500 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 1904999936 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 38100000 |
| PARALLEL_GAP 7620000 |
| TANDEM_LENGTH 38100000 |
| TANDEM_GAP 7620000 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 7620000 |
| MATCH_LENGTH_TOLERANCE 7620000 |
| } |
| } |
| RULE_SET (4) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 1 |
| VALID_LAYER 2 |
| VALID_VIA_TYPE STANDARDVIA |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| CAM_SECTION PARENT |
| { |
| CAM_VERSION V4.0 |
| CAM_DOC_LIST PARENT |
| { |
| CAM_DOC_NAME (art001.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art001.pho |
| DOC_LAYER_NAMES Top |
| DOC_LAYER_NUMBERS 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 1 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (art002.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art002.pho |
| DOC_LAYER_NAMES Bottom |
| DOC_LAYER_NUMBERS 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 2 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (sm001021.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm001021.pho |
| DOC_LAYER_NAMES Top Solder_Mask_Top |
| DOC_LAYER_NUMBERS 1 21 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 21 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (smd002022.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd002022.pho |
| DOC_LAYER_NAMES Bottom Paste_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 22 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (smd001023.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd001023.pho |
| DOC_LAYER_NAMES Top Paste_Mask_Top |
| DOC_LAYER_NUMBERS 1 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 23 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sst001026.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sst001026.pho |
| DOC_LAYER_NAMES Top Silkscreen_Top |
| DOC_LAYER_NUMBERS 1 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 26 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES Black None |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sm002028.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm002028.pho |
| DOC_LAYER_NAMES Bottom Solder_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 28 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (ssb002029.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE ssb002029.pho |
| DOC_LAYER_NAMES Bottom Silkscreen_Bottom |
| DOC_LAYER_NUMBERS 2 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 29 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None Black |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| } |
| CAM_AUGMENT_ON_THE_FLY Y |
| CAM_DRILL_SYMBOL_TABLE PARENT |
| { |
| MARKER_SIZE 0 |
| MARKER_LINE_WIDTH 381000 |
| MARKER_CHAR_HEIGHT 0 |
| CHART_TEXT_HEIGHT 0 |
| CHART_LINE_WIDTH 0 |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE Value |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Tolerance |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Part Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Description |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Cost |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #2 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE ASSEMBLY_OPTIONS |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| INHERITANCE PART |
| INHERITANCE JUMPER |
| ECO_REGISTRATION Y |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE PowerGround |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Voltage |
| { |
| TYPE QUANTITY |
| QUANTITY Voltage |
| ABBR V |
| UNIT Volt |
| MIN -100kV |
| MAX 100kV |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Geometry.Height |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 952500000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Diameter |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Probe to Trace Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Probe to Pad Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Generate Test Points |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Allow Stubs |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Stub Length |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Use Via Grid |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid X-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid Y-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE HyperLynx.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Sim Direction |
| { |
| TYPE LIST N |
| { |
| SIM_BOTH |
| SIM_IN |
| SIM_OUT |
| } |
| INHERITANCE PIN |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Frequency |
| { |
| TYPE QUANTITY |
| QUANTITY Frequency |
| ABBR Hz |
| UNIT Hertz |
| MIN 0Hz |
| MAX 1000GHz |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Duty Cycle |
| { |
| TYPE QUANTITY |
| QUANTITY |
| ABBR % |
| UNIT percent |
| MIN 0% |
| MAX 100% |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Signal Type |
| { |
| TYPE LIST N |
| { |
| Address |
| Analog High Speed |
| Analog Low Speed |
| Clock |
| Data |
| Do Not Analyze |
| Power Supply |
| Strobe |
| } |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model Pin |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Strategy.Fanout.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.FormatId |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipWidth |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipHeight |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MinLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WToWDistance |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WBtoPad |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxAngle |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WB1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuideCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuide1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPAssignment1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Marker_Shape |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_NumberPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_AngularPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Suffix |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Line_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Preview_Type |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 5 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Use |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.X |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Y |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Amplitude.Min |
| { |
| TYPE INTEGER |
| MIN 3 |
| MAX 30 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Gap.Min |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 10 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MaxChannelWidth |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 381000000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.SoftLengthRrules |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MeanderBeforeTune |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE MatchLength.Name |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Planning.Scheduled |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| DECAL ELYTA |
| { |
| Description elektrolyt SMD velikost A |
| Geometry.Height 1.8 mm |
| } |
| DECAL ELYTB |
| { |
| Description elektrolyt SMD velikost B |
| Geometry.Height 2 mm |
| } |
| DECAL ELYTC |
| { |
| Description elektrolyt SMD velikost C |
| Geometry.Height 2.8 mm |
| } |
| DECAL ELYTD |
| { |
| Description elektrolyt SMD velikost D |
| Geometry.Height 3 mm |
| } |
| DECAL CE020X5 |
| { |
| Description Elyt prumer 5mm, roztec 2.032mm - 80 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE025X6 |
| { |
| Description Elyt prumer 6.3mm, roztec 2.54mm - 100 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE035X8 |
| { |
| Description Elyt prumer 8 mm, roztec3.505 mm - 138 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE050X10 |
| { |
| Description Elyt prumer 10mm, roztec 5.08mm - 200 mils |
| Geometry.Height 17 mm |
| } |
| DECAL CE050X13 |
| { |
| Description Elyt prumer 13mm, roztec 5.08mm - 200 mils |
| Geometry.Height 27 mm |
| } |
| DECAL CE075X16 |
| { |
| Description Elyt prumer 16mm, roztec 7.5mm - 300 mils |
| Geometry.Height 26 mm |
| } |
| DECAL CE075X18 |
| { |
| Description Elyt prumer 18mm, roztec 7.5mm - 300 mils |
| Geometry.Height 43 mm |
| } |
| DECAL CE020X5/L |
| { |
| Description Elyt prumer 5mm na lezato, roztec 2.032mm - 80 mils |
| Geometry.Height 5.5 mm |
| } |
| DECAL CE025X6/L |
| { |
| Description Elyt prumer 6.3mm na lezato, roztec 2.54mm - 100 mils |
| Geometry.Height 6.5 mm |
| } |
| DECAL CE035X8/L |
| { |
| Description Elyt prumer 8 mm na lezato, roztec3.505 mm - 138 mils |
| Geometry.Height 8.5 mm |
| } |
| DECAL CE050X10/L |
| { |
| Description Elyt prumer 10mm na lezato, roztec 5.08mm - 200 mils |
| Geometry.Height 10.5 mm |
| } |
| DECAL CANNON25M |
| { |
| Description konektor Cannon 25 pinu, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M/T |
| { |
| Description konektor Cannon 25 pinu na plocho, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F |
| { |
| Description konektor Cannon 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90 |
| { |
| Description konektor Cannon 9 pinu uhlovy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90/L |
| { |
| Description konektor Cannon 9 pinu uhlovy dlouhy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F/T |
| { |
| Description konektor Cannon na plocho 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F |
| { |
| Description konektor Cannon 25 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F/T |
| { |
| Description konektor Cannon 25 pinu na lezato, samice |
| Geometry.Height 13 mm |
| } |
| DECAL SOD87 |
| { |
| Description dioda SMD v pouzdre SOD87 |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO201 |
| { |
| Description usm. dioda nad 1A roztec 13.97mm, 550mils |
| Geometry.Height 10mm |
| } |
| DECAL DO41 |
| { |
| Description usm. dioda do 1A roztec 8.89mm, 350mils |
| Geometry.Height 3.5mm |
| } |
| DECAL MELF |
| { |
| Description dioda SMD v pouzdre MELF |
| Geometry.Height 3 mm |
| } |
| DECAL MINIMELF |
| { |
| Description dioda SMD v pouzdre MINIMELF |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO35 |
| { |
| Description vseob. dioda roztec 6.35mm, 250mils |
| Geometry.Height 3.5mm |
| } |
| DECAL DS040 |
| { |
| Description dioda nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL TO220AC |
| { |
| Description diodove pouzdro TO220AC |
| Geometry.Height 20mm |
| } |
| DECAL TO220AB |
| { |
| Description diodove pouzdro TO220AB |
| Geometry.Height 20mm |
| } |
| DECAL JUMP1 |
| { |
| Description jednorady hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP1_90 |
| { |
| Description jednorady uhlovy hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2 |
| { |
| Description jednorady hrebinek 2 piny |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2_90 |
| { |
| Description jednorady uhlovy hrebinek 2 piny |
| Geometry.Height 3 mm |
| } |
| DECAL ARK050X2 |
| { |
| Description svorkovnice se dvema piny, roztec 5.08 mm - 200 mils |
| Geometry.Height 13 mm |
| } |
| DECAL CROSS |
| { |
| Description usazovaci kriz |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M3 |
| { |
| Description otvor pro sroub M3 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M4 |
| { |
| Description otvor pro sroub M4 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M2 |
| { |
| Description otvor pro sroub M2 |
| Geometry.Height 0 mm |
| } |
| DECAL R0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| } |
| DECAL R0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| } |
| DECAL R1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| } |
| DECAL RS025 |
| { |
| Description bezny rezistor nastojato roztec 2,54 mm, 100 mils |
| Geometry.Height 9 mm |
| } |
| DECAL RL090 |
| { |
| Description bezny rezistor roztec 8.89mm, 350mils |
| Geometry.Height 3mm |
| } |
| DECAL RL140 |
| { |
| Description rezistor 2W nalezato roztec 13.97mm, 550mils |
| Geometry.Height 4.6mm |
| } |
| DECAL RS040 |
| { |
| Description rezistor 2W nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL R1812 |
| { |
| Description rezistor SMD velikost 1812 |
| Geometry.Height 1mm |
| } |
| DECAL DIP16_300 |
| { |
| Description pouzdro DIP16 roztec 7.62 mm - 300 mils |
| Geometry.Height 6 mm |
| } |
| PARTTYPE DB25M |
| { |
| Description ruzne verze DB25 samecek |
| } |
| PARTTYPE DB9F |
| { |
| Description ruzne verze DB9 samice |
| } |
| PARTTYPE DB25F |
| { |
| Description ruzne verze DB25 samice |
| } |
| PARTTYPE D |
| { |
| Value ??? |
| Description ruzne druhy diod |
| } |
| PARTTYPE HOLE |
| { |
| Description otvor pro ruzne prumery sroubu |
| } |
| PARTTYPE R |
| { |
| Value ??? |
| Description rezistory ruznych typu |
| } |
| PARTTYPE DIP16 |
| { |
| Description patice pro DIL16 |
| } |
| PCB DEFAULT |
| { |
| "DFT.Probe to Trace Clearance" 228600dbunit |
| "DFT.Probe to Pad Clearance" 228600dbunit |
| "DFT.Generate Test Points" No |
| "DFT.Allow Stubs" Yes |
| "DFT.Stub Length" 5715000dbunit |
| "DFT.Use Via Grid" Yes |
| "DFT.Grid X-Coordinate" 952500dbunit |
| "DFT.Grid Y-Coordinate" 952500dbunit |
| AutoDimensioning.Marker_Shape YYNNNY |
| AutoDimensioning.Text_NumberPrecision 0 1 2 |
| AutoDimensioning.Text_AngularPrecision 0 0 0 |
| AutoDimensioning.Text_Suffix mil##mm##" |
| AutoDimensioning.Text_Layer 24 |
| AutoDimensioning.Line_Layer 24 |
| AutoDimensioning.Preview_Type 1 |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD No |
| Rules.ViaAtSMD.FitInside Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Length.Unlimited Yes |
| Placement.Grid.Use No |
| Placement.Grid.X 3810000dbunit |
| Placement.Grid.Y 3810000dbunit |
| Accordion.Amplitude.Min 3 |
| Accordion.Gap.Min 1 |
| Routing.MaxChannelWidth 3810000dbunit |
| Routing.SoftLengthRrules Yes |
| Routing.MeanderBeforeTune No |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/Motory/verze2/SPINACE02.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/SPINACE03.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/spinace.opj |
|---|
| 0,0 → 1,135 |
| (ExpressProject "spinace" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\spinace.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "SPINACE.asc") |
| (OTHER_Netlist_File2 "SPINACE.CMP") |
| (OTHER_View_Output "TRUE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "1") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.DRC") |
| (BOM_Scope "0") |
| (BOM_Mode "0") |
| (BOM_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.BOM") |
| (BOM_Merge_Include "FALSE") |
| (BOM_Property_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_Header "Item\tQuantity\tReference\tPart") |
| (BOM_Include_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.INC") |
| (BOM_Include_File_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_One_Part_Per_Line "FALSE") |
| (BOM_View_Output "TRUE")) |
| (Folder "Outputs" |
| (File ".\spinace.asc" |
| (Type "Report")) |
| (File ".\spinace.drc" |
| (Type "Report")) |
| (File ".\spinace.bom" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x") |
| (PartMRUSelector |
| (No_PCB_Device |
| (FullPartName "No_PCB_Device.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (HOLE_M3 |
| (FullPartName "HOLE_M3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB15F |
| (FullPartName "DB15F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs") |
| (Select "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 297")) |
| (Tab 0)))) |
| /schemata/Motory/verze2/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/KAKLIK/SPINACE03_u.eco |
|---|
| 0,0 → 1,12 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE03_u.pcb -- Mon Mar 10 13:09:02 2003 |
| *DELPIN* |
| CON4.25 GND |
| *NET* |
| *SIGNAL* +12V 30 |
| CON4.25 CON4.1 |
| *END* |
| /schemata/Motory/verze2/zaloha/KAKLIK/SPINACE03_u.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/KAKLIK/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/SPINACE.BOM |
|---|
| 0,0 → 1,28 |
| ROBOT DRIVER Revised: Sunday, March 09, 2003 |
| 000 Revision: 1 |
| Bill Of Materials March 9,2003 10:25:18 Page1 |
| Item Quantity Reference Part |
| ______________________________________________ |
| 1 1 CON1 DB25M |
| 2 1 CON3 DB9F |
| 3 1 CON4 DB25F |
| 4 1 C1 10 uF |
| 5 1 D1 D |
| 6 2 J1,J2 JUMP1 |
| 7 1 J3 JUMP2 |
| 8 3 M1,M2,M3 CROSS |
| 9 4 M4,M5,M6,M7 HOLE_M3 |
| 10 1 M8 Kabel |
| 11 6 R1,R2,R3,R11,R12,R13 R |
| 12 2 R4,R14 1k5 |
| 13 2 U1,U2 KP_1040 |
| 14 2 U6,U7 ULN2003 |
| /schemata/Motory/verze2/zaloha/SPINACE.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/SPINACE.DRC |
|---|
| 0,0 → 1,23 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| WARNING: [DRC0007] Net has no driving source BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections BA2_0 |
| SCHEMATIC1, PAGE1 (96.52, 22.86) |
| WARNING: [DRC0006] Net has fewer than two connections STROBE |
| SCHEMATIC1, PAGE1 (48.26, 22.86) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N04316 |
| SCHEMATIC1, PAGE1 (68.58, 15.24) |
| ERROR: [DRC0029] Bus has no name and therefore defines no signals. N08219 |
| SCHEMATIC1, PAGE1 (68.58, 71.12) |
| Checking for Invalid References |
| Checking for Duplicate References |
| /schemata/Motory/verze2/zaloha/SPINACE.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/SPINACE.ONL |
|---|
| 0,0 → 1,854 |
| (PCB SPINACE |
| (description |
| (timeStamp "2003 03 09 09 34 16") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "ROBOT DRIVER") |
| (date "Sunday, March 09, 2003") |
| (document "000") |
| (revision "1") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component D |
| (place D1 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 00005091) |
| ("Source Package" D) |
| (Value D)))) |
| (component JUMP1 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000551B) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000552D) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component DB25F |
| (place CON4 |
| (property |
| ("PCB Footprint" CANNON25F_90) |
| (Device DB25F) |
| (timestamp 000042C0) |
| ("Source Package" DB25F) |
| (Value DB25F)))) |
| (component JUMP2 |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP2) |
| (Device JUMP2) |
| (timestamp 0000553F) |
| ("Source Package" JUMP2) |
| (Value JUMP2)))) |
| (component DB25M |
| (place CON1 |
| (property |
| ("PCB Footprint" CANNON25M_90) |
| (Device DB25M) |
| (timestamp 00005BBA) |
| ("Source Package" DB25M) |
| (Value DB25M)))) |
| (component ULN2003 |
| (place U6 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 000002C9) |
| ("Source Package" ULN2003) |
| (Value ULN2003))) |
| (place U7 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000317) |
| ("Source Package" ULN2003) |
| (Value ULN2003)))) |
| (component KP_1040 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000003) |
| ("Source Package" KP_1040) |
| (Value KP_1040))) |
| (place U2 |
| (property |
| ("PCB Footprint" DIP16_300) |
| (Device DIP16) |
| (timestamp 00000051) |
| ("Source Package" KP_1040) |
| (Value KP_1040)))) |
| (component DB9F |
| (place CON3 |
| (property |
| ("PCB Footprint" CANNON9F_90) |
| (Device DB9F) |
| (timestamp 0000350D) |
| ("Source Package" DB9F) |
| (Value DB9F)))) |
| (component HOLE_M3 |
| (place M4 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CC4) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M5 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CD6) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M6 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CE8) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M7 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device HOLE) |
| (timestamp 00011CFA) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3)))) |
| (component CROSS |
| (place M1 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 000014D3) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M2 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C4C) |
| ("Source Package" CROSS) |
| (Value CROSS))) |
| (place M3 |
| (property |
| ("PCB Footprint" CROSS) |
| (Device CROSS) |
| (timestamp 00011C60) |
| ("Source Package" CROSS) |
| (Value CROSS)))) |
| (component "C-ELYT" |
| (place C1 |
| (property |
| ("PCB Footprint" CE050X13) |
| (Device ELYT) |
| (timestamp 00006890) |
| ("Source Package" "C-ELYT") |
| (Value "10 uF")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000635) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000067B) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000691) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000006A7) |
| ("Source Package" R) |
| (Value 1k5))) |
| (place R11 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000828) |
| ("Source Package" R) |
| (Value R))) |
| (place R12 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000088C) |
| ("Source Package" R) |
| (Value R))) |
| (place R13 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000086A) |
| ("Source Package" R) |
| (Value R))) |
| (place R14 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000008A2) |
| ("Source Package" R) |
| (Value 1k5))))) |
| (library |
| (image DB25M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image DB9F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB9F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4)))) |
| (image DB25F |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB25F)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4))) |
| (pin 999 21 |
| (property |
| (pinname 21) |
| (pintype 4))) |
| (pin 999 22 |
| (property |
| (pinname 22) |
| (pintype 4))) |
| (pin 999 23 |
| (property |
| (pinname 23) |
| (pintype 4))) |
| (pin 999 24 |
| (property |
| (pinname 24) |
| (pintype 4))) |
| (pin 999 25 |
| (property |
| (pinname 25) |
| (pintype 4)))) |
| (image KP_1040 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname A1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname K1) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname A2) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname K2) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname A3) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname K3) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname A4) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname K4) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname e4) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname c4) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname e3) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname c3) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname e2) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname c2) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname e1) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname c1) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ULN2003 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP16)) |
| (pin 999 1 |
| (property |
| (pinname I1) |
| (pintype 0))) |
| (pin 999 2 |
| (property |
| (pinname I2) |
| (pintype 0))) |
| (pin 999 3 |
| (property |
| (pinname I3) |
| (pintype 0))) |
| (pin 999 4 |
| (property |
| (pinname I4) |
| (pintype 0))) |
| (pin 999 5 |
| (property |
| (pinname I5) |
| (pintype 0))) |
| (pin 999 6 |
| (property |
| (pinname I6) |
| (pintype 0))) |
| (pin 999 7 |
| (property |
| (pinname I7) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname GND) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname K) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname O7) |
| (pintype 2))) |
| (pin 999 11 |
| (property |
| (pinname O6) |
| (pintype 2))) |
| (pin 999 12 |
| (property |
| (pinname O5) |
| (pintype 2))) |
| (pin 999 13 |
| (property |
| (pinname O4) |
| (pintype 2))) |
| (pin 999 14 |
| (property |
| (pinname O3) |
| (pintype 2))) |
| (pin 999 15 |
| (property |
| (pinname O2) |
| (pintype 2))) |
| (pin 999 16 |
| (property |
| (pinname O1) |
| (pintype 2)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device C)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CROSS |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SYMBOLS.OLB) |
| (Device CROSS))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4)))) |
| (image HOLE_M3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device PAD)) |
| (pin 999 1 |
| (property |
| (pinname PIN) |
| (pintype 4)))) |
| (image JUMP2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image D |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))))) |
| (network |
| (net RTS |
| (pins |
| CON3-7 U7-6)) |
| (net DTR |
| (pins |
| CON3-4 U7-7)) |
| (net RI |
| (pins |
| CON3-9 U2-15)) |
| (net CTS |
| (pins |
| CON3-8 U2-13)) |
| (net DSR |
| (pins |
| CON3-6 U2-11)) |
| (net D4 |
| (pins |
| U7-2 CON1-6)) |
| (net D6 |
| (pins |
| CON1-8 U7-4)) |
| (net D7 |
| (pins |
| CON1-9 U7-5)) |
| (net D5 |
| (pins |
| U7-3 CON1-7)) |
| (net N21518 |
| (pins |
| U2-10 U2-12 U2-14 U2-16 D1-C C1-A)) |
| (net BA2_1 |
| (pins |
| CON1-14 U6-2)) |
| (net BA2_2 |
| (pins |
| U6-5 CON1-16)) |
| (net BA2_3 |
| (pins |
| CON1-17 U6-7)) |
| (net BA1_6 |
| (pins |
| CON1-10 U1-10)) |
| (net BA1_7 |
| (pins |
| CON1-11 U1-12)) |
| (net BA1_5 |
| (pins |
| U1-14 CON1-12)) |
| (net BA1_4 |
| (pins |
| U1-16 CON1-13)) |
| (net O2_0 |
| (pins |
| U6-16 CON4-14)) |
| (net O2_1 |
| (pins |
| U6-15 CON4-2)) |
| (net O2_2 |
| (pins |
| U6-12 CON4-16)) |
| (net O2_3 |
| (pins |
| U6-10 CON4-17)) |
| (net O0_0 |
| (pins |
| U6-14 CON4-15)) |
| (net O0_1 |
| (pins |
| U6-13 CON4-3)) |
| (net O0_2 |
| (pins |
| U6-11 CON4-4)) |
| (net O0_3 |
| (pins |
| U7-16 CON4-5)) |
| (net O0_4 |
| (pins |
| U7-15 CON4-18)) |
| (net O0_5 |
| (pins |
| U7-14 CON4-6)) |
| (net O0_6 |
| (pins |
| U7-13 CON4-19)) |
| (net O0_7 |
| (pins |
| U7-12 CON4-7)) |
| (net O_RTS |
| (pins |
| U7-11 CON4-20)) |
| (net O_DTR |
| (pins |
| U7-10 CON4-8)) |
| (net I1_4 |
| (pins |
| R4-2 CON4-10)) |
| (net I1_5 |
| (pins |
| R3-2 CON4-22)) |
| (net I1_6 |
| (pins |
| R1-2 CON4-21)) |
| (net I1_7 |
| (pins |
| R2-2 CON4-9)) |
| (net I1_3 |
| (pins |
| R11-2 CON4-23)) |
| (net I_DSR |
| (pins |
| R12-2 CON4-11)) |
| (net I_CTS |
| (pins |
| R13-2 CON4-24)) |
| (net I_RI |
| (pins |
| R14-2 CON4-12)) |
| (net BA1_3 |
| (pins |
| CON1-15 U2-9)) |
| (net TXD |
| (pins |
| D1-A CON3-3)) |
| (net N01853 |
| (pins |
| U1-7 R1-1)) |
| (net N01906 |
| (pins |
| U1-5 R2-1)) |
| (net N01959 |
| (pins |
| U1-3 R3-1)) |
| (net N02012 |
| (pins |
| U1-1 R4-1)) |
| (net N02164 |
| (pins |
| U2-7 R11-1)) |
| (net N02168 |
| (pins |
| U2-3 R13-1)) |
| (net N02134 |
| (pins |
| U2-5 R12-1)) |
| (net N02160 |
| (pins |
| U2-1 R14-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| U1-8 U2-2 U1-15 U6-8 U1-13 U2-6 U1-2 U1-9 U7-8 |
| U2-4 U1-6 U1-4 U1-11 U2-8 CON3-5 CON4-25 CON4-13 C1-C |
| J2-1 CON1-18 CON1-19 CON1-20 CON1-21 CON1-22 CON1-23 CON1-24 CON1-25)) |
| (net STROBE |
| (pins |
| U6-1 CON1-1)) |
| (net D0 |
| (pins |
| CON1-2 U6-3)) |
| (net D1 |
| (pins |
| U6-4 CON1-3)) |
| (net DCD |
| (pins |
| J3-1 CON3-1)) |
| (net D2 |
| (pins |
| CON1-4 U6-6)) |
| (net RXD |
| (pins |
| J3-2 CON3-2)) |
| (net D3 |
| (pins |
| CON1-5 U7-1)) |
| (net +12V |
| (property |
| (nettype S)) |
| (pins |
| U6-9 U7-9 CON4-1 J1-1))) |
| ) |
| /schemata/Motory/verze2/zaloha/SPINACE.asc |
|---|
| 0,0 → 1,151 |
| *PADS-PCB* |
| *PART* |
| C1 ELYT@CE050X13 |
| CON1 DB25M@CANNON25M_90 |
| CON3 DB9F@CANNON9F_90 |
| CON4 DB25F@CANNON25F_90 |
| D1 D@DO41 |
| J1 JUMP1@JUMP1 |
| J2 JUMP1@JUMP1 |
| J3 JUMP2@JUMP2 |
| M1 CROSS@CROSS |
| M2 CROSS@CROSS |
| M3 CROSS@CROSS |
| M4 HOLE@HOLE_M3 |
| M5 HOLE@HOLE_M3 |
| M6 HOLE@HOLE_M3 |
| M7 HOLE@HOLE_M3 |
| R1 R@RL090 |
| R11 R@RL090 |
| R12 R@RL090 |
| R13 R@RL090 |
| R14 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| U1 DIP16@DIP16_300 |
| U2 DIP16@DIP16_300 |
| U6 DIP16@DIP16_300 |
| U7 DIP16@DIP16_300 |
| *NET* |
| *SIGNAL* RTS |
| CON3.7 U7.6 |
| *SIGNAL* DTR |
| CON3.4 U7.7 |
| *SIGNAL* RI |
| CON3.9 U2.15 |
| *SIGNAL* CTS |
| CON3.8 U2.13 |
| *SIGNAL* DSR |
| CON3.6 U2.11 |
| *SIGNAL* D4 |
| U7.2 CON1.6 |
| *SIGNAL* D6 |
| CON1.8 U7.4 |
| *SIGNAL* D7 |
| CON1.9 U7.5 |
| *SIGNAL* D5 |
| U7.3 CON1.7 |
| *SIGNAL* N21518 |
| U2.10 U2.12 U2.14 U2.16 D1.C C1.A |
| *SIGNAL* BA2_1 |
| CON1.14 U6.2 |
| *SIGNAL* BA2_2 |
| U6.5 CON1.16 |
| *SIGNAL* BA2_3 |
| CON1.17 U6.7 |
| *SIGNAL* BA1_6 |
| CON1.10 U1.10 |
| *SIGNAL* BA1_7 |
| CON1.11 U1.12 |
| *SIGNAL* BA1_5 |
| U1.14 CON1.12 |
| *SIGNAL* BA1_4 |
| U1.16 CON1.13 |
| *SIGNAL* O2_0 |
| U6.16 CON4.14 |
| *SIGNAL* O2_1 |
| U6.15 CON4.2 |
| *SIGNAL* O2_2 |
| U6.12 CON4.16 |
| *SIGNAL* O2_3 |
| U6.10 CON4.17 |
| *SIGNAL* O0_0 |
| U6.14 CON4.15 |
| *SIGNAL* O0_1 |
| U6.13 CON4.3 |
| *SIGNAL* O0_2 |
| U6.11 CON4.4 |
| *SIGNAL* O0_3 |
| U7.16 CON4.5 |
| *SIGNAL* O0_4 |
| U7.15 CON4.18 |
| *SIGNAL* O0_5 |
| U7.14 CON4.6 |
| *SIGNAL* O0_6 |
| U7.13 CON4.19 |
| *SIGNAL* O0_7 |
| U7.12 CON4.7 |
| *SIGNAL* O_RTS |
| U7.11 CON4.20 |
| *SIGNAL* O_DTR |
| U7.10 CON4.8 |
| *SIGNAL* I1_4 |
| R4.2 CON4.10 |
| *SIGNAL* I1_5 |
| R3.2 CON4.22 |
| *SIGNAL* I1_6 |
| R1.2 CON4.21 |
| *SIGNAL* I1_7 |
| R2.2 CON4.9 |
| *SIGNAL* I1_3 |
| R11.2 CON4.23 |
| *SIGNAL* I_DSR |
| R12.2 CON4.11 |
| *SIGNAL* I_CTS |
| R13.2 CON4.24 |
| *SIGNAL* I_RI |
| R14.2 CON4.12 |
| *SIGNAL* BA1_3 |
| CON1.15 U2.9 |
| *SIGNAL* TXD |
| D1.A CON3.3 |
| *SIGNAL* N01853 |
| U1.7 R1.1 |
| *SIGNAL* N01906 |
| U1.5 R2.1 |
| *SIGNAL* N01959 |
| U1.3 R3.1 |
| *SIGNAL* N02012 |
| U1.1 R4.1 |
| *SIGNAL* N02164 |
| U2.7 R11.1 |
| *SIGNAL* N02168 |
| U2.3 R13.1 |
| *SIGNAL* N02134 |
| U2.5 R12.1 |
| *SIGNAL* N02160 |
| U2.1 R14.1 |
| *SIGNAL* GND |
| U1.8 U2.2 U1.15 U6.8 U1.13 U2.6 U1.2 U1.9 |
| U7.8 U2.4 U1.6 U1.4 U1.11 U2.8 CON3.5 CON4.25 |
| CON4.13 C1.C J2.1 CON1.18 CON1.19 CON1.20 CON1.21 CON1.22 |
| CON1.23 CON1.24 CON1.25 |
| *SIGNAL* STROBE |
| U6.1 CON1.1 |
| *SIGNAL* D0 |
| CON1.2 U6.3 |
| *SIGNAL* D1 |
| U6.4 CON1.3 |
| *SIGNAL* DCD |
| J3.1 CON3.1 |
| *SIGNAL* D2 |
| CON1.4 U6.6 |
| *SIGNAL* RXD |
| J3.2 CON3.2 |
| *SIGNAL* D3 |
| CON1.5 U7.1 |
| *SIGNAL* +12V |
| U6.9 U7.9 CON4.1 J1.1 |
| *END* |
| /schemata/Motory/verze2/zaloha/SPINACE.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/SPINACE01.eco |
|---|
| 0,0 → 1,15 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:18:27 2003 |
| *CHGPART* |
| CON4 DB25F@CANNON25F_90 DB25F@CANNON25F |
| CON1 DB25M@CANNON25M_90 DB25M@CANNON25M |
| CON3 DB9F@CANNON9F_90 DB9F@CANNON9F |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SPINACE01.pcb -- Sun Mar 09 12:38:47 2003 |
| *END* |
| /schemata/Motory/verze2/zaloha/SPINACE01.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/SPINACE02.asc |
|---|
| 0,0 → 1,9604 |
| !PADS-POWERPCB-V5.0-BASIC! DESIGN DATABASE ASCII FILE 1.0 |
| *PCB* GENERAL PARAMETERS OF THE PCB DESIGN |
| UNITS 0 2=Inches 1=Metric 0=Mils |
| USERGRID 381000 381000 Space between USER grid points |
| MAXIMUMLAYER 2 Maximum routing layer |
| WORKLEVEL 1 Level items will be created on |
| DISPLAYLEVEL 1 toggle for displaying working level last |
| LAYERPAIR 1 2 Layer pair used to route connection |
| VIAMODE T Type of via to use when routing between layers |
| LINEWIDTH 381000 Width items will be created with |
| TEXTSIZE 3810000 381000 Height and LineWidth text will be created with |
| JOBTIME 154 Amount of time spent on this PCB design |
| DOTGRID 38100000 38100000 Space between graphic dots |
| SCALE 9.745 Scale of window expansion |
| ORIGIN 381000000 381000000 User defined origin location |
| WINDOWCENTER 480140111 491602242 Point defining the center of the window |
| BACKUPTIME 20 Number of minutes between database backups |
| REAL WIDTH 381000 Widths greater then this are displayed real size |
| ALLSIGONOFF 1 All signal nets displayed on/off |
| REFNAMESIZE 3810000 381000 Height and LineWidth used by part ref. names |
| HIGHLIGHT 0 Highlight nets flag |
| JOBNAME SPINACE02.pcb |
| CONCOL 1 |
| FBGCOL 1 0 |
| HATCHGRID 381000 Copper pour hatching grid |
| TEARDROP 2713690 Teardrop tracks |
| THERLINEWID 571500 Copper pour thermal line width |
| PSVIAGRID 381000 381000 Push & Shove Via Grid |
| PADFILLWID 381000 CAM finger pad fill width |
| THERSMDWID 381000 Copper pour thermal line width for SMD |
| MINHATAREA 0 Minimum hatch area |
| HATCHMODE 0 Hatch generation mode |
| HATCHDISP 0 Hatch display flag |
| DRILLHOLE 228600 Drill hole checking spacing |
| MITRERADII 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |
| MITRETYPE 1 Mitring type |
| HATCHRAD 1.000000 Hatch outline smoothing radius |
| MITREANG 180 180 180 180 180 180 90 |
| HATCHANG 0 Hatch angle |
| THERFLAGS 0 Copper pour thermal line flags |
| DRLOVERSIZE 114300 Drill oversize for plated holes |
| PLANERAD 0.000000 Plane outline smoothing radius |
| PLANEFLAGS OUTLINE THERMALS Y Y Y N N Y Y Y N N Y Y N Y Y N N Plane and Test Points flags |
| COMPHEIGHT 0 Board Top Component Height Restriction |
| KPTHATCHGRID 3810000 Copper pour hatching grid |
| BOTCMPHEIGHT 0 Board Bottom Component Height Restriction |
| FANOUTGRID 952500 952500 Fanout grid |
| FANOUTLENGTH 9525000 Maximum fanout length |
| ROUTERFLAGS 83879441 Autorouter specific flags |
| VERIFYFLAGS 1861 Verify Design flags |
| FABCHKFLAGS 3967 Fabrication checks flags |
| ATMAXSIZE 114300 Acid Traps Maximum Size |
| ATMAXANGLE 161999820 Acid Traps Maximum Angle |
| SLMINCOPPER 114300 Slivers Minimum Copper |
| SLMINMASK 114300 Slivers Minimum Mask |
| STMINCLEAR 5 Starved Thermal Minimum Clearance |
| STMINSPOKES 4 Starved Thermal Minimum Spokes |
| TPMINWIDTH 114300 Minimum Trace Width |
| TPMINSIZE 114300 Mimimum Pad Size |
| SSMINGAP 114300 Silk Screen Over Pads Minimum Gap |
| SBMINGAP 114300 Solder Bridges Minimum Gap |
| SBLAYER 1 Solder Bridges Layer |
| ARPTOM 114300 Pad To Mask Annular Ring |
| ARPTOMLAYER 1 Pad To Mask Annular Ring Layer |
| ARDTOM 114300 Drill To Mask Annular Ring |
| ARDTOMLAYER 1 Drill To Mask Annular Ring Layer |
| ARDTOP 114300 Drill To Pad Annular Ring |
| ARDTOPLAYER 0 Drill To Pad Annular Ring Layer |
| PLNSEPGAP 228600 Plane separation gap |
| IDFSHAPELAY 0 IDF shapes layer |
| TEARDROPDATA 90 90 |
| *REUSE* |
| *REMARK* TYPE TYPENAME |
| *REMARK* TIMESTAMP SECONDS |
| *REMARK* PART NAMING PARTNAMING |
| *REMARK* PART NAME |
| *REMARK* NET NAMING NETNAMING |
| *REMARK* NET MERGE NAME |
| *REMARK* REUSE INSTANCENM PARTNAMING NETNAMING X Y ORI GLUED |
| *TEXT* FREE TEXT |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST .REUSE. INSTANCENM |
| *LINES* LINES ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES TEXT SIGSTR |
| *REMARK* .REUSE. INSTANCE RSIGNAL |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| DRW83515280 BOARD 7620000 114300000 1 |
| CLOSED 5 381000 0 |
| 0 3048000 |
| 153924000 3048000 |
| 153924000 -106680000 |
| 0 -106680000 |
| 0 3048000 |
| DIM98152102 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 2048 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 2048 |
| -153924000 0 |
| -153923000 0 |
| ARWLN1 2 381000 24 2048 |
| 0 -15240000 |
| -69324682 -15240000 |
| ARWHD1 4 381000 24 2048 |
| 0 -15240000 |
| -3810000 -16192500 |
| -3810000 -14287500 |
| 0 -15240000 |
| ARWLN2 2 381000 24 2048 |
| -153924000 -15240000 |
| -84599318 -15240000 |
| ARWHD2 4 381000 24 2048 |
| -153924000 -15240000 |
| -150114000 -14287500 |
| -150114000 -16192500 |
| -153924000 -15240000 |
| EXTLN1 2 381000 24 2048 |
| 0 -1905000 |
| 0 -17145000 |
| EXTLN2 2 381000 24 2048 |
| -153924000 -1905000 |
| -153924000 -17145000 |
| -83456318 -16668750 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 102.6mm |
| DIM58176572 LINES 161544000 7620000 8 1 |
| BASPNT 2 38100 24 4096 |
| 0 0 |
| 1000 0 |
| BASPNT 2 38100 24 4096 |
| 0 109728000 |
| 1000 109728000 |
| ARWLN1 2 381000 24 4096 |
| 20955000 0 |
| 20955000 52292250 |
| ARWHD1 4 381000 24 4096 |
| 20955000 0 |
| 20002500 3810000 |
| 21907500 3810000 |
| 20955000 0 |
| ARWLN2 2 381000 24 4096 |
| 20955000 109728000 |
| 20955000 57435750 |
| ARWHD2 4 381000 24 4096 |
| 20955000 109728000 |
| 21907500 105918000 |
| 20002500 105918000 |
| 20955000 109728000 |
| EXTLN1 2 381000 24 4096 |
| 1905000 0 |
| 22860000 0 |
| EXTLN2 2 381000 24 4096 |
| 1905000 109728000 |
| 22860000 109728000 |
| 15023523 53435250 0.000 24 3810000 381000 N LEFT DOWN 0 |
| 73.2mm |
| *CLUSTER* ITEMS |
| *REMARK* NAME XLOC YLOC PARENTID CLUSTERID CHILD_NUM ATTRIBUTE ATT2 BROID |
| *VIA* ITEMS |
| *REMARK* NAME DRILL STACKLINES [DRILL START] [DRILL END] |
| *REMARK* LEVEL SIZE SHAPE [INNER DIAMETER] |
| JMPVIA_AAAAB 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| JMPVIA_AAAAA 1409700 3 |
| -2 2095500 R |
| -1 2667000 R |
| 0 2095500 R |
| STANDARDVIA 1409700 3 |
| -2 2095500 R |
| -1 2095500 R |
| 0 2095500 R |
| *JUMPER* |
| *REMARK* NAME FLAGS MINLEN MAXLEN LENINCR LABELS PADSTACKS |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| JMP1 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| JMP2 V 3810000 381000000 952500 1 JMPVIA_AAAAA JMPVIA_AAAAA |
| VALUE -1943100 2171700 0.000 1 3810000 381000 N LEFT DOWN |
| *PARTDECAL* ITEMS |
| *REMARK* NAME ORIX ORIY PIECES TERMINALS STACKS TEXT LABELS |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* PIECETYPE CORNERS WIDTH LEVEL PINNUM |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* T XLOC YLOC NMXLOC NMYLOC |
| *REMARK* PAD PIN STACKLINES |
| *REMARK* LEVEL SIZE SHAPE IDIA DRILL [PLATED] |
| *REMARK* LEVEL SIZE SHAPE FINORI FINLENGTH FINOFFSET DRILL [PLATED] |
| ELYTA I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1028700 1676400 |
| -3864408 1676400 |
| -4169208 1371600 |
| -4169208 -1371600 |
| -3864408 -1676400 |
| -1028700 -1676400 |
| OPEN 4 300000 0 |
| 1028700 1676400 |
| 4076700 1676400 |
| 4076700 -1676400 |
| 1028700 -1676400 |
| -5528803 -670722 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2118500 2430789 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -1990311 6609732 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2400300 0 -2512500 -600000 |
| T2400300 0 2107500 -585000 |
| PAD 0 5 |
| -2 2476500 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 2705100 S |
| 23 2324100 S |
| ELYTB I 0 0 2 2 1 1 2 |
| OPEN 6 300000 0 |
| -1333500 2362200 |
| -3619500 2362200 |
| -3924300 2057400 |
| -3924300 -2057400 |
| -3619500 -2362200 |
| -1333500 -2362200 |
| OPEN 4 300000 0 |
| 1333500 2362200 |
| 3924300 2362200 |
| 3924300 -2362200 |
| 1333500 -2362200 |
| -5232429 -592116 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2274039 10133936 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2274039 6015735 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2476500 0 -2588700 -600000 |
| T2476500 0 2183700 -585000 |
| PAD 0 5 |
| -2 2095500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 2324100 RF 90.000 4038600 0 |
| 23 1943100 RF 90.000 3657600 0 |
| ELYTC I 0 0 2 2 1 2 2 |
| OPEN 6 300000 0 |
| -2095500 2667000 |
| -5524500 2667000 |
| -5829300 2377937 |
| -5829300 -2358906 |
| -5524500 -2667000 |
| -2095500 -2667000 |
| OPEN 4 300000 0 |
| 2095500 2667000 |
| 5829300 2667000 |
| 5829300 -2667000 |
| 2095500 -2667000 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -7281389 -522186 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2345177 3367048 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2475293 7574104 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-3810000 0 -3922200 -600000 |
| T3810000 0 3517200 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 3810000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4038600 0 |
| 23 3086100 RF 90.000 3657600 0 |
| ELYTD I 0 0 2 2 1 2 2 |
| OPEN 6 299847 0 |
| -3048000 3505200 |
| -6477000 3505200 |
| -6858000 3124200 |
| -6858000 -3124200 |
| -6477000 -3505200 |
| -2971800 -3505200 |
| OPEN 4 300000 0 |
| 3048000 3505200 |
| 6858000 3505200 |
| 6858000 -3505200 |
| 3048000 -3505200 |
| -5204201 -607316 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -8302901 -620739 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2122481 4358106 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2170638 8692198 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-4800600 0 -4912800 -600000 |
| T4800600 0 4507800 -585000 |
| PAD 0 5 |
| -2 3238500 RF 90.000 4572000 0 0 |
| -1 0 R |
| 0 0 R |
| 21 3467100 RF 90.000 4800600 0 |
| 23 3086100 RF 90.000 4419600 0 |
| CE020X5 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4000500 0 |
| -4000500 0 |
| -5257847 -629938 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE025X6 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 4953000 0 |
| -4953000 0 |
| -6430981 -671836 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 6477000 0 |
| -6477000 0 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 8001000 0 |
| -8001000 0 |
| -9946160 -766682 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X13 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 10287000 0 |
| -10287000 0 |
| -12356954 -891778 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE075X16 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 12382500 0 |
| -12382500 0 |
| -14624835 -1147354 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2731444 18839171 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2449944 13490664 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1714500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE075X18 I 0 0 1 2 2 1 2 |
| CIRCLE 2 300000 0 |
| 13982700 0 |
| -13982700 0 |
| -16300121 -922964 0.000 26 3048000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2234097 14901313 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| VALUE -2157651 20558301 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| T-5715000 0 -5859000 -600000 |
| T5715000 0 5409000 -450000 |
| PAD 0 5 |
| -2 3048000 R 1524000 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3276600 R |
| 28 3276600 R |
| PAD 1 5 |
| -2 3048000 S 1524000 |
| -1 3048000 S |
| 0 3048000 S |
| 21 3276600 S |
| 28 3276600 S |
| CE020X5/L I 0 0 3 2 2 1 2 |
| CLOSED 5 299847 0 |
| -4000500 -2286000 |
| 3848100 -2286000 |
| 3848100 -18554700 |
| -4000500 -18554700 |
| -4000500 -2286000 |
| OPEN 2 299847 0 |
| -1409700 -1524000 |
| -1409700 -2286000 |
| OPEN 2 299847 0 |
| 1524000 -1524000 |
| 1524000 -2286000 |
| -4000500 -838200 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1524000 0 -1668000 -600000 |
| T1524000 0 1218000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CE025X6/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -4914900 -2286000 |
| 4914900 -2286000 |
| 4914900 -18478500 |
| -4914900 -18478500 |
| -4914900 -2286000 |
| OPEN 3 300000 0 |
| -1828800 -1524000 |
| -1866900 -2286000 |
| -1943100 -2247900 |
| OPEN 2 300000 0 |
| 1905000 -1524000 |
| 1905000 -2286000 |
| -4648200 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -2133600 10668000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2133600 6629400 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-1905000 0 -2049000 -600000 |
| T1905000 0 1599000 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE035X8/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -6400800 -2286000 |
| 6438900 -2286000 |
| 6438900 -18554700 |
| -6400800 -18554700 |
| -6400800 -2286000 |
| OPEN 2 300000 0 |
| -2590800 -1524000 |
| -2590800 -2286000 |
| OPEN 2 300000 0 |
| 2705100 -1524000 |
| 2705100 -2286000 |
| -7983180 -941306 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1829142 11247961 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1875718 7288997 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2772900 -600000 |
| T2628900 0 2322900 -450000 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| CE050X10/L I 0 0 3 2 2 1 2 |
| CLOSED 5 300000 0 |
| -8001000 -2667000 |
| 7924800 -2667000 |
| 7924800 -25984200 |
| -8001000 -25984200 |
| -8001000 -2667000 |
| OPEN 2 300000 0 |
| -3810000 -1524000 |
| -3810000 -2667000 |
| OPEN 2 300000 0 |
| 3810000 -1524000 |
| 3810000 -2667000 |
| -6591300 -647700 0.000 26 2286000 304800 N LEFT DOWN 0 |
| + |
| VALUE -1893642 8758297 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1985670 12945607 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -3954000 -600000 |
| T3810000 0 3504000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| CANNON25M M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE M |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 2130000 -24750000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T0 2130000 0 2130000 |
| T4125000 2130000 4125000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T24750000 2130000 24750000 2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25M/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 1 |
| -26670000 -3048000 |
| -26670000 3467100 |
| 26670000 3467100 |
| 26670000 -3238500 |
| -2819400 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE M |
| VALUE -1905000 8229600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1828800 4305300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-24750000 0 -24750000 0 |
| T-20625000 0 -20625000 0 |
| T-16500000 0 -16500000 0 |
| T-12375000 0 -12375000 0 |
| T-8250000 0 -8250000 0 |
| T-4125000 0 -4125000 0 |
| T0 0 0 0 |
| T4125000 0 4125000 0 |
| T8250000 0 8250000 0 |
| T12375000 0 12375000 0 |
| T16500000 0 16500000 0 |
| T20625000 0 20625000 0 |
| T24750000 0 24750000 0 |
| T-22687500 0 -22687500 0 |
| T-18562500 0 -18562500 0 |
| T-14437500 0 -14437500 0 |
| T-10312500 0 -10312500 0 |
| T-6187500 0 -6187500 0 |
| T-2062500 0 -2062500 0 |
| T2062500 0 2062500 0 |
| T6187500 0 6187500 0 |
| T10312500 0 10312500 0 |
| T14437500 0 14437500 0 |
| T18562500 0 18562500 0 |
| T22687500 0 22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| CANNON9F M 8520000 -2130000 1 11 3 1 2 |
| CLOSED 5 300000 0 |
| -23400000 9450000 |
| 23400000 9450000 |
| 23400000 -9450000 |
| -23400000 -9450000 |
| -23400000 9450000 |
| -2445000 -7365000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -4725000 14160000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -4650000 10275000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90 M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -13500000 |
| -23400000 -13500000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -13500000 |
| -13200000 -23400000 |
| 13200000 -23400000 |
| 13200000 -13500000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F_90/L M 8520000 -2130000 2 11 3 1 2 |
| CLOSED 5 750000 0 |
| -23400000 5400000 |
| 23400000 5400000 |
| 23400000 -17100000 |
| -23400000 -17100000 |
| -23400000 5400000 |
| OPEN 4 300000 0 |
| -13200000 -17100000 |
| -13200000 -27300000 |
| 13200000 -27300000 |
| 13200000 -17100000 |
| -3450000 -8550000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-18480000 0 -18480000 0 |
| T18480000 0 18480000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 10 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 11 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON9F/T I 8520000 -2130000 1 11 8 1 2 |
| OPEN 4 300000 1 |
| -10668000 -3048000 |
| -10668000 3810000 |
| 10668000 3810000 |
| 10668000 -3048000 |
| -3467100 -5676900 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1866900 8572500 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1866900 4533900 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10934700 381000 -10934700 381000 |
| T10706100 -38100 10706100 -38100 |
| PAD 0 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 1 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 2 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 3 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 4 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 5 5 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| 23 2895600 RF 90.000 5943600 0 |
| PAD 10 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| PAD 11 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 23 0 R |
| CANNON25F M 25560000 -2130000 1 27 3 1 2 |
| CLOSED 5 300000 0 |
| -40050000 9450000 |
| 40050000 9450000 |
| 40050000 -9450000 |
| -40050000 -9450000 |
| -40050000 9450000 |
| -3000000 -7500000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -1500000 10500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 15000000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90 M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -13500000 |
| -40050000 -13500000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -13500000 |
| -25200000 -23400000 |
| 25200000 -23400000 |
| 25200000 -13500000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T24750000 1905000 24750000 1905000 |
| T20625000 1905000 20625000 1905000 |
| T16500000 1905000 16500000 1905000 |
| T12375000 1905000 12375000 1905000 |
| T8250000 1905000 8250000 1905000 |
| T4125000 1905000 4125000 1905000 |
| T0 1905000 0 1905000 |
| T-4125000 1905000 -4125000 1905000 |
| T-8250000 1905000 -8250000 1905000 |
| T-12375000 1905000 -12375000 1905000 |
| T-16500000 1905000 -16500000 1905000 |
| T-20625000 1905000 -20625000 1905000 |
| T-24750000 1905000 -24750000 1905000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F_90/L M 25560000 -2130000 2 27 3 1 2 |
| CLOSED 5 750000 0 |
| -40050000 5400000 |
| 40050000 5400000 |
| 40050000 -17100000 |
| -40050000 -17100000 |
| -40050000 5400000 |
| OPEN 4 300000 0 |
| -25200000 -17100000 |
| -25200000 -27300000 |
| 25200000 -27300000 |
| 25200000 -17100000 |
| -2400000 -9150000 0.000 26 2250000 300000 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 2130000 24750000 2130000 |
| T20625000 2130000 20625000 2130000 |
| T16500000 2130000 16500000 2130000 |
| T12375000 2130000 12375000 2130000 |
| T8250000 2130000 8250000 2130000 |
| T4125000 2130000 4125000 2130000 |
| T0 2130000 0 2130000 |
| T-4125000 2130000 -4125000 2130000 |
| T-8250000 2130000 -8250000 2130000 |
| T-12375000 2130000 -12375000 2130000 |
| T-16500000 2130000 -16500000 2130000 |
| T-20625000 2130000 -20625000 2130000 |
| T-24750000 2130000 -24750000 2130000 |
| T22687500 -2130000 22687500 -2130000 |
| T18562500 -2130000 18562500 -2130000 |
| T14437500 -2130000 14437500 -2130000 |
| T10312500 -2130000 10312500 -2130000 |
| T6187500 -2130000 6187500 -2130000 |
| T2062500 -2130000 2062500 -2130000 |
| T-2062500 -2130000 -2062500 -2130000 |
| T-6187500 -2130000 -6187500 -2130000 |
| T-10312500 -2130000 -10312500 -2130000 |
| T-14437500 -2130000 -14437500 -2130000 |
| T-18562500 -2130000 -18562500 -2130000 |
| T-22687500 -2130000 -22687500 -2130000 |
| T-35025000 0 -35025000 0 |
| T35025000 0 35025000 0 |
| PAD 0 5 |
| -2 2667000 R 1409700 |
| -1 2667000 R |
| 0 2667000 R |
| 21 2895600 R |
| 28 2895600 R |
| PAD 26 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| PAD 27 5 |
| -2 6743700 R 4572000 |
| -1 6743700 R |
| 0 6743700 R |
| 21 6972300 R |
| 28 6972300 R |
| CANNON25F/T I 25560000 -2130000 1 27 15 1 2 |
| OPEN 4 300000 0 |
| -26670000 -3048000 |
| -26670000 3581400 |
| 26670000 3581400 |
| 26670000 -3048000 |
| -2971800 -5905500 0.000 26 2250186 299847 N LEFT DOWN 0 |
| TYPE F |
| VALUE -2133600 4610100 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2324100 8610600 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T24750000 0 24750000 0 |
| T20625000 0 20625000 0 |
| T16500000 0 16500000 0 |
| T12375000 0 12375000 0 |
| T8250000 0 8250000 0 |
| T4125000 0 4125000 0 |
| T0 0 0 0 |
| T-4125000 0 -4125000 0 |
| T-8250000 0 -8250000 0 |
| T-12375000 0 -12375000 0 |
| T-16500000 0 -16500000 0 |
| T-20625000 0 -20625000 0 |
| T-24750000 0 -24750000 0 |
| T22687500 0 22687500 0 |
| T18562500 0 18562500 0 |
| T14437500 0 14437500 0 |
| T10312500 0 10312500 0 |
| T6187500 0 6187500 0 |
| T2062500 0 2062500 0 |
| T-2062500 0 -2062500 0 |
| T-6187500 0 -6187500 0 |
| T-10312500 0 -10312500 0 |
| T-14437500 0 -14437500 0 |
| T-18562500 0 -18562500 0 |
| T-22687500 0 -22687500 0 |
| T-26812500 0 -26812500 0 |
| T26812500 0 26812500 0 |
| PAD 0 4 |
| -2 3048000 RF 90.000 6096000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 3276600 RF 90.000 6324600 0 |
| PAD 14 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 15 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 16 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 17 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 18 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 19 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 20 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 21 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 22 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 23 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 24 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 25 5 |
| -2 0 R 0 N |
| -1 0 R |
| 0 3048000 RF 90.000 6096000 0 |
| 22 2895600 RF 90.000 5943600 0 |
| 28 3276600 RF 90.000 6324600 0 |
| PAD 26 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| PAD 27 5 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| 21 0 R |
| 28 0 R |
| SOD87 I 0 0 2 2 1 1 2 |
| OPEN 4 304800 0 |
| 1333500 1524000 |
| 3429000 1524000 |
| 3429000 -1524000 |
| 1333500 -1524000 |
| OPEN 6 304800 0 |
| -1333500 1524000 |
| -3124200 1524000 |
| -3505200 1219200 |
| -3505200 -1219200 |
| -3124200 -1524000 |
| -1333500 -1524000 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -2019300 2247900 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2057400 6515100 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2286000 0 -2438400 -495300 |
| T2286000 0 1981200 -571500 |
| PAD 0 5 |
| -2 1524000 RF 90.000 2286000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1752600 RF 90.000 2514600 0 |
| 23 1371600 RF 90.000 2133600 0 |
| DO201 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -7050000 2400000 |
| -5550000 3900000 |
| 7050000 3900000 |
| 7050000 -3900000 |
| -5550000 -3900000 |
| -7050000 -2400000 |
| -7050000 2400000 |
| OPEN 2 300000 0 |
| -5448300 3886200 |
| -5448300 -3886200 |
| OPEN 2 304800 1 |
| -7050000 0 |
| -8250000 0 |
| OPEN 2 304800 1 |
| 7050000 0 |
| 8250000 0 |
| -9486900 2819400 0.000 26 3000000 300000 N LEFT DOWN 0 |
| K |
| VALUE -2895600 4762500 0.000 1 3000000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -3276600 10096500 0.000 1 3000000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 3924300 R 1981200 |
| -1 3924300 R |
| 0 3924300 R |
| 21 4152900 R |
| 28 4152900 R |
| DO41 M 0 0 2 2 1 1 2 |
| CLOSED 7 300000 0 |
| -5250000 1500000 |
| -4500000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -4500000 -2250000 |
| -5250000 -1500000 |
| -5250000 1500000 |
| OPEN 2 300000 0 |
| -4457700 2247900 |
| -4457700 -2171700 |
| -6019800 -3505200 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| MELF I 0 0 2 2 1 2 2 |
| OPEN 6 304800 0 |
| -2667000 2400300 |
| -4762500 2400300 |
| -5143500 2019300 |
| -5143500 -2019300 |
| -4762500 -2400300 |
| -2667000 -2400300 |
| OPEN 4 304800 0 |
| 2667000 2400300 |
| 5143500 2400300 |
| 5143500 -2400300 |
| 2667000 -2400300 |
| -4648200 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| -6705600 -723900 0.000 26 2286000 304800 N LEFT DOWN 0 |
| ¨K |
| VALUE -1981200 10591800 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2057400 4876800 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3733800 0 -3886200 -495300 |
| T3733800 0 3429000 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 4000500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 4229100 0 |
| 23 1752600 RF 90.000 3848100 0 |
| MINIMELF I 0 0 2 2 1 1 2 |
| OPEN 6 304800 0 |
| -1524000 1905000 |
| -3810000 1905000 |
| -4114800 1600200 |
| -4114800 -1600200 |
| -3810000 -1905000 |
| -1524000 -1905000 |
| OPEN 4 304800 0 |
| 1524000 1905000 |
| 4000500 1905000 |
| 4000500 -1905000 |
| 1524000 -1905000 |
| -5372100 -914400 0.000 26 2286000 304800 N LEFT DOWN 0 |
| K |
| VALUE -1943100 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2095500 2476500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-2628900 0 -2781300 -495300 |
| T2628900 0 2324100 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 2857500 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2133600 RF 90.000 3086100 0 |
| 23 1752600 RF 90.000 2705100 0 |
| DO35 M 0 0 4 2 1 1 2 |
| CLOSED 7 300000 0 |
| -2250000 1050000 |
| -1800000 1500000 |
| 2250000 1500000 |
| 2250000 -1500000 |
| -1800000 -1500000 |
| -2250000 -1050000 |
| -2250000 1050000 |
| OPEN 2 300000 0 |
| -1524000 1485900 |
| -1524000 -1409700 |
| OPEN 2 304800 1 |
| -2250000 0 |
| -3300000 0 |
| OPEN 2 304800 1 |
| 2250000 0 |
| 3300000 0 |
| -3750000 1500000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -1790700 5981700 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -1981200 2019300 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-4762500 0 -4912500 -600000 |
| T4762500 0 4462500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| DS040 M 0 0 2 2 1 1 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| OPEN 2 300000 0 |
| 1524000 0 |
| -1524000 0 |
| -5181600 -723900 0.000 26 2250000 300000 N LEFT DOWN 0 |
| K |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| TO220AC M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 2925000 -8175000 |
| -4575000 -8175000 |
| -4575000 8325000 |
| 2925000 8325000 |
| 2925000 -8175000 |
| OPEN 2 1200000 0 |
| -4575000 -7725000 |
| -4575000 7875000 |
| -240000 -7170000 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -3000000 9450000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2925000 13575000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-75000 3885000 -417900 3389700 |
| T-75000 -3735000 -303600 -4268400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| TO220AB M 0 0 2 2 1 1 2 |
| CLOSED 5 300000 0 |
| 3000000 -8250000 |
| -4500000 -8250000 |
| -4500000 8250000 |
| 3000000 8250000 |
| 3000000 -8250000 |
| OPEN 2 1200000 0 |
| -4500000 -7800000 |
| -4500000 7800000 |
| -190500 -5143500 0.000 26 1905000 190500 N LEFT DOWN 0 |
| K |
| VALUE -2400000 13425000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2775000 9300000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T0 1905000 -342900 1409700 |
| T0 -1905000 -228600 -2438400 |
| PAD 0 5 |
| -2 3048000 R 1333500 |
| -1 3048000 R |
| 0 3048000 R |
| 21 3324000 R |
| 28 3324000 R |
| JUMP1 I 0 0 1 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -1905000 |
| -1905000 -1905000 |
| -1905000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP1_90 I 0 0 2 1 1 0 2 |
| CLOSED 5 300000 0 |
| -1905000 1905000 |
| 1905000 1905000 |
| 1905000 -6096000 |
| -1905000 -6096000 |
| -1905000 1905000 |
| OPEN 2 300000 0 |
| -1905000 -1905000 |
| 1905000 -1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T0 0 -306000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -1905000 |
| -3810000 -1905000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2511000 S |
| 28 2511000 S |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| JUMP2_90 I 0 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -3810000 1905000 |
| 3810000 1905000 |
| 3810000 -6096000 |
| -3810000 -6096000 |
| -3810000 1905000 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2211000 -450000 |
| T1905000 0 1676400 -495300 |
| PAD 0 5 |
| -2 2286000 S 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| PAD 2 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| ARK050X2 M 3810000 0 1 2 2 0 2 |
| CLOSED 5 300000 0 |
| -7500000 6750000 |
| 7500000 6750000 |
| 7500000 -6750000 |
| -7500000 -6750000 |
| -7500000 6750000 |
| VALUE -2250000 7500000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 11250000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-3810000 0 -4038600 -495300 |
| T3810000 0 3810000 0 |
| PAD 0 5 |
| -2 2857500 S 1524000 |
| -1 2857500 S |
| 0 2857500 S |
| 21 3086100 S |
| 28 3086100 S |
| PAD 2 5 |
| -2 2857500 R 1524000 |
| -1 2857500 R |
| 0 2857500 R |
| 21 3086100 R |
| 28 3086100 R |
| CROSS I 0 0 10 1 1 0 2 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 190500 |
| OPEN 2 266700 0 |
| 0 0 |
| 190500 0 |
| OPEN 2 266700 0 |
| 0 0 |
| 0 -190500 |
| OPEN 2 266700 0 |
| 0 0 |
| -190500 0 |
| OPEN 2 266700 0 |
| 571500 0 |
| 2476500 0 |
| OPEN 2 266700 0 |
| 0 -571500 |
| 0 -1866900 |
| OPEN 2 266700 0 |
| 0 571500 |
| 0 2286000 |
| OPEN 2 266700 0 |
| -2286000 0 |
| -571500 0 |
| CIRCLE 2 266700 0 |
| 0 -1143000 |
| 0 1143000 |
| CIRCLE 2 266700 0 |
| 0 -762000 |
| 0 762000 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 3 |
| -2 0 R 76200 |
| -1 0 R |
| 0 0 R |
| HOLE_M3 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 9000000 R 4800000 |
| -1 9000000 R |
| 0 9000000 R |
| 21 9225000 R |
| 28 9225000 R |
| HOLE_M4 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| T0 0 0 0 |
| PAD 0 5 |
| -2 13500000 R 6300000 |
| -1 13500000 R |
| 0 13500000 R |
| 21 13725000 R |
| 28 13725000 R |
| HOLE_M2 M 0 0 0 1 1 0 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| T0 0 0 0 |
| PAD 0 5 |
| -2 6750000 R 3150000 |
| -1 6750000 R |
| 0 6750000 R |
| 21 6975000 R |
| 28 6975000 R |
| R0805 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -609600 1333500 |
| -2590800 1333500 |
| -2590800 -1333500 |
| -609600 -1333500 |
| OPEN 4 304800 0 |
| 609600 1333500 |
| 2590800 1333500 |
| 2590800 -1333500 |
| 609600 -1333500 |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-1447800 0 -1333500 -571500 |
| T1447800 0 1481570 -571500 |
| PAD 0 5 |
| -2 1485900 RF 90.000 1943100 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1714500 RF 90.000 2171700 0 |
| 23 1333500 RF 90.000 1790700 0 |
| R0603 I 0 0 2 2 1 0 2 |
| OPEN 4 300000 0 |
| -457200 1143000 |
| -2209800 1143000 |
| -2209800 -1143000 |
| -457200 -1143000 |
| OPEN 4 300000 0 |
| 457200 1143000 |
| 2209800 1143000 |
| 2209800 -1143000 |
| 457200 -1143000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2205000 1755000 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-1143000 0 -1333500 -571500 |
| T1143000 0 838200 -571500 |
| PAD 0 5 |
| -2 1333500 RF 90.000 1524000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1562100 RF 90.000 1752600 0 |
| 23 1181100 RF 90.000 1371600 0 |
| R1206 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1295400 1714500 |
| -3429000 1714500 |
| -3429000 -1714500 |
| -1295400 -1714500 |
| OPEN 4 304800 0 |
| 1295400 1714500 |
| 3429000 1714500 |
| 3429000 -1714500 |
| 1295400 -1714500 |
| VALUE -2247900 2324100 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6553200 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| T-2171700 0 -2283900 -600000 |
| T2171700 0 1878900 -585000 |
| PAD 0 5 |
| -2 1638300 RF 90.000 2667000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1866900 RF 90.000 2895600 0 |
| 23 1409700 RF 90.000 2514600 0 |
| RS025 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 495000 0 |
| -4305000 0 |
| VALUE -2250000 2700000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 6600000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-1905000 0 -2055000 -600000 |
| T1905000 0 1605000 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL090 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -5250000 2250000 |
| 5250000 2250000 |
| 5250000 -2250000 |
| -5250000 -2250000 |
| -5250000 2250000 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-6667500 0 -6817500 -600000 |
| T6667500 0 6367500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RL140 M 0 0 1 2 1 0 2 |
| CLOSED 5 300000 0 |
| -9000000 3450000 |
| 9000000 3450000 |
| 9000000 -3450000 |
| -9000000 -3450000 |
| -9000000 3450000 |
| VALUE -1800000 4050000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -1950000 8100000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| T-10477500 0 -10627500 -600000 |
| T10477500 0 10177500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| RS040 M 0 0 1 2 1 0 2 |
| CIRCLE 2 300000 0 |
| 892500 0 |
| -6607500 0 |
| VALUE -900000 7800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -750000 3750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| T-2857500 0 -3007500 -600000 |
| T2857500 0 2557500 -450000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2511000 R |
| 28 2511000 R |
| R1812 I 0 0 2 2 1 0 2 |
| OPEN 4 304800 0 |
| -1905000 3048000 |
| -4876800 3048000 |
| -4876800 -3048000 |
| -1905000 -3048000 |
| OPEN 4 304800 0 |
| 1905000 3048000 |
| 4876800 3048000 |
| 4876800 -3048000 |
| 1905000 -3048000 |
| VALUE -2235000 5745000 0.000 1 2286000 304800 N LEFT UP |
| Part Type |
| VALUE -2171700 6286500 0.000 1 2286000 304800 N LEFT DOWN |
| Ref.Des. |
| T-3543300 0 -3429000 -571500 |
| T3543300 0 3577070 -571500 |
| PAD 0 5 |
| -2 1905000 RF 90.000 5334000 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 2095500 RF 90.000 5524500 0 |
| 23 1714500 RF 90.000 5181600 0 |
| DIP16_300 I 0 0 1 16 2 0 2 |
| CLOSED 9 300000 0 |
| -3810000 15240000 |
| -1143000 15240000 |
| -1143000 12954000 |
| 1143000 12954000 |
| 1143000 15240000 |
| 3810000 15240000 |
| 3810000 -15240000 |
| -3810000 -15240000 |
| -3810000 15240000 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| T-5715000 13335000 -5715000 13335000 |
| T-5715000 9525000 -5715000 9525000 |
| T-5715000 5715000 -5715000 5715000 |
| T-5715000 1905000 -5715000 1905000 |
| T-5715000 -1905000 -5715000 -1905000 |
| T-5715000 -5715000 -5715000 -5715000 |
| T-5715000 -9525000 -5715000 -9525000 |
| T-5715000 -13335000 -5715000 -13335000 |
| T5715000 -13335000 5715000 -13335000 |
| T5715000 -9525000 5715000 -9525000 |
| T5715000 -5715000 5715000 -5715000 |
| T5715000 -1905000 5715000 -1905000 |
| T5715000 1905000 5715000 1905000 |
| T5715000 5715000 5715000 5715000 |
| T5715000 9525000 5715000 9525000 |
| T5715000 13335000 5715000 13335000 |
| PAD 0 5 |
| -2 2286000 R 1333500 |
| -1 2286000 R |
| 0 2286000 R |
| 21 2514600 R |
| 28 2514600 R |
| PAD 1 5 |
| -2 2286000 S 1333500 |
| -1 2286000 S |
| 0 2286000 S |
| 21 2514600 S |
| 28 2514600 S |
| *PARTTYPE* ITEMS |
| *REMARK* NAME DECALNM UNITS TYPE GATES SIGPINS PINNMS FLAGS ECO |
| *REMARK* G/S SWAPTYPE PINS |
| *REMARK* PIN.SWAPTYPE.PINTYPE.FUNCNAME |
| *REMARK* SIGPIN PIN WIDTH SIGNAME |
| ELYT ELYTA:ELYTB:ELYTC:ELYTD:CE020X5:CE025X6:CE035X8:CE050X10:CE050X13:CE075X16:CE075X18:CE020X5/L:CE025X6/L:CE035X8/L:CE050X10/L I CAP 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| A C |
| DB25M CANNON25M:CANNON25M_90:CANNON25M_90/L:CANNON25M/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| DB9F CANNON9F:CANNON9F_90:CANNON9F_90/L:CANNON9F/T I CON 1 0 0 0 Y |
| G 0 11 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U |
| DB25F CANNON25F:CANNON25F_90:CANNON25F_90/L:CANNON25F/T I CON 1 0 0 0 Y |
| G 0 27 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U 17.0.U 18.0.U |
| 19.0.U 20.0.U 21.0.U 22.0.U 23.0.U 24.0.U |
| 25.0.U 26.0.U 27.0.U |
| D SOD87:DO201:DO41:MELF:MINIMELF:DO35:DS040:TO220AC:TO220AB I DIO 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| C A |
| JUMP1 JUMP1:JUMP1_90 I CON 1 0 0 0 Y |
| G 0 1 |
| 1.0.Z |
| JUMP2 JUMP2:JUMP2_90:ARK050X2 I CON 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| CROSS CROSS I MEC 0 0 0 0 Y |
| HOLE HOLE_M3:HOLE_M4:HOLE_M2 I MEC 0 0 0 0 Y |
| R R0805:R0603:R1206:RS025:RL090:RL140:RS040:R1812 I RES 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| DIP16 DIP16_300 I DIP 1 0 0 0 Y |
| G 0 16 |
| 1.0.U 2.0.U 3.0.U 4.0.U 5.0.U 6.0.U |
| 7.0.U 8.0.U 9.0.U 10.0.U 11.0.U 12.0.U |
| 13.0.U 14.0.U 15.0.U 16.0.U |
| *PART* ITEMS |
| *REMARK* REFNM PTYPENM X Y ORI GLUE MIRROR ALT CLSTID CLSTATTR BROTHERID LABELS |
| *REMARK* .REUSE. INSTANCE RPART |
| *REMARK* VISIBLE XLOC YLOC ORI HEIGTH WIDTH LEVEL MIRRORED HJUST VJUST RIGHTREADING |
| C1 ELYT 128016000 103632000 270.000 U N 8 -1 0 -1 2 |
| VALUE -2651424 16686015 0.000 1 3048000 299847 N LEFT UP |
| Part Type |
| VALUE -2759263 11401893 0.000 1 3048000 299847 N LEFT DOWN |
| Ref.Des. |
| CON1 DB25M 147447000 62484000 90.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| CON3 DB9F 53721000 103632000 180.000 U N 1 -1 0 -1 2 |
| VALUE -2400000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2550000 10950000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| CON4 DB25F 21717000 62484000 270.000 U N 1 -1 0 -1 2 |
| VALUE -2250000 10800000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| VALUE -2100000 6750000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| D1 D 81534000 99822000 270.000 U N 2 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J1 JUMP1 105003600 39319200 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J2 JUMP1 105270300 28041600 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| J3 JUMP2 47244000 94107000 0.000 U N 0 -1 0 -1 2 |
| VALUE -2286000 2514600 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2514600 6438900 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| M1 CROSS 3810000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M2 CROSS 167640000 3810000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M3 CROSS 167640000 121920000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M4 HOLE 16764000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M5 HOLE 152400000 16764000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M6 HOLE 152400000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| M7 HOLE 16764000 108204000 0.000 G N 0 -1 0 -1 2 |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT UP |
| Part Type |
| VALUE 0 0 0.000 1 1905000 190500 N LEFT DOWN |
| Ref.Des. |
| R1 R 98298000 60960000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R11 R 71628000 68580000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R12 R 71628000 74676000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R13 R 71628000 80772000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R14 R 71628000 86868000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R2 R 98298000 66294000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R3 R 98298000 71628000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| R4 R 98298000 76962000 180.000 U N 4 -1 0 -1 2 |
| VALUE -1950000 3000000 0.000 1 2250000 300000 N LEFT DOWN |
| Ref.Des. |
| VALUE -2250000 7200000 0.000 1 2250000 300000 N LEFT UP |
| Part Type |
| U1 DIP16 127673100 71475600 0.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U2 DIP16 100584000 99822000 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U6 DIP16 47510700 29908500 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| U7 DIP16 80543400 30175200 90.000 U N 0 -1 0 -1 2 |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT DOWN |
| Ref.Des. |
| VALUE -1500000 17903190 0.000 1 2286000 266700 N LEFT UP |
| Part Type |
| *ROUTE* |
| *REMARK* *SIGNAL* SIGNAME SIGFLAG COLOR |
| *REMARK* REFNM.PIN .REUSE. INSTANCE RSIG REFNM.PIN .REUSE. INSTANCE RSIG |
| *REMARK* XLOC YLOC LAYER SEGMENTWIDTH FLAGS [ARCDIR/VIANAME] [TEARDROP [P WID LEN [FLAGS]] [N WID LEN [FLAGS]]] [JMPNM JMPFLAG] REUSE INST RSIG |
| *SIGNAL* RTS 0 -2 |
| CON3.7 U7.6 |
| 51658500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 51658500 98074500 1 609600 1536 |
| 55626000 94107000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP1 S |
| 118872000 43434000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 116141280 40703280 1 609600 3584 |
| 116141280 34925345 1 609600 3584 |
| 102856735 21640800 1 609600 3584 |
| 89077800 21640800 1 609600 3584 |
| 86258400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DTR 0 -2 |
| CON3.4 U7.7 |
| 57846000 101502000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 60837528 98510472 1 609600 1536 |
| 60837528 98420472 1 609600 1536 |
| 63627000 95631000 0 609600 2816 JMPVIA_AAAAA THERMAL TEARDROP P 90 90 JUMPER JMP2 E |
| 113538000 42672000 1 609600 3328 JMPVIA_AAAAA THERMAL TEARDROP N 90 90 |
| 113538000 33722985 1 609600 3584 |
| 102446415 22631400 1 609600 3584 |
| 91897200 22631400 1 609600 3584 |
| 90068400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RI 0 -2 |
| CON3.9 U2.15 |
| 59908500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62906700 105762000 1 609600 1536 |
| 70104000 98564700 1 609600 1536 |
| 78714600 98564700 1 609600 1536 |
| 80962500 100812600 1 609600 1536 |
| 86525100 100812600 1 609600 1536 |
| 91059000 105346500 1 609600 1536 |
| 91059000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* CTS 0 -2 |
| CON3.8 U2.13 |
| 55783500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55783500 107632498 1 609600 1536 |
| 57498002 109347000 1 609600 1536 |
| 94869000 109347000 1 609600 1536 |
| 98679000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DSR 0 -2 |
| CON3.6 U2.11 |
| 47533500 105762000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52109100 110337600 1 609600 1536 |
| 101498400 110337600 1 609600 1536 |
| 106299000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D4 0 -2 |
| U7.2 CON1.6 |
| 71018400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 77800200 17678400 1 609600 1536 |
| 104636400 17678400 1 609600 1536 |
| 145317000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D6 0 -2 |
| CON1.8 U7.4 |
| 145317000 66609000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139257300 60549300 1 609600 1536 |
| 139257300 55239525 1 609600 1536 |
| 103677375 19659600 1 609600 1536 |
| 83439000 19659600 1 609600 1536 |
| 78638400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D7 0 -2 |
| CON1.9 U7.5 |
| 145317000 70734000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138266700 63683700 1 609600 1536 |
| 138266700 55649845 1 609600 1536 |
| 103267055 20650200 1 609600 1536 |
| 86258400 20650200 1 609600 1536 |
| 82448400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D5 0 -2 |
| U7.3 CON1.7 |
| 74828400 24460200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80619600 18669000 1 609600 1536 |
| 104087695 18669000 1 609600 1536 |
| 140247900 54829205 1 609600 1536 |
| 140247900 57414900 1 609600 1536 |
| 145317000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N21518 0 -2 |
| D1.C U2.16 |
| 81534000 106489500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 83896200 106489500 1 609600 1536 |
| 84848700 105537000 1 609600 1536 |
| 87249000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.16 U2.14 |
| 87249000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87249000 107213398 1 609600 1536 |
| 88392002 108356400 1 609600 1536 |
| 93725998 108356400 1 609600 1536 |
| 94869000 107213398 1 609600 1536 |
| 94869000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.14 U2.12 |
| 94869000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 96697800 103708200 1 609600 1536 |
| 100660200 103708200 1 609600 1536 |
| 102489000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.12 U2.10 |
| 102489000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 104317800 103708200 1 609600 1536 |
| 108280200 103708200 1 609600 1536 |
| 110109000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| U2.10 C1.A |
| 110109000 105537000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 111937800 103708200 1 609600 1536 |
| 120396000 103708200 1 609600 1536 |
| 124129800 107442000 1 609600 1536 |
| 128016000 107442000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_1 0 -2 |
| CON1.14 U6.2 |
| 149577000 39796500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 39796500 1 609600 1536 |
| 114175259 10744200 1 609600 1536 |
| 51435000 10744200 1 609600 1536 |
| 37985700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_2 0 -2 |
| U6.5 CON1.16 |
| 49415700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 59893200 13716000 1 609600 1536 |
| 108235479 13716000 1 609600 1536 |
| 142565979 48046500 1 609600 1536 |
| 149577000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA2_3 0 -2 |
| CON1.17 U6.7 |
| 149577000 52171500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143889139 52171500 1 609600 1536 |
| 107414839 15697200 1 609600 1536 |
| 65532000 15697200 1 609600 1536 |
| 57035700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_6 0 -2 |
| CON1.10 U1.10 |
| 145317000 74859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 139293600 68835600 1 609600 1536 |
| 139293600 67856100 1 609600 1536 |
| 133388100 61950600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_7 0 -2 |
| CON1.11 U1.12 |
| 145317000 78984000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143485500 77152500 1 609600 1536 |
| 140970000 77152500 1 609600 1536 |
| 133388100 69570600 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_5 0 -2 |
| U1.14 CON1.12 |
| 133388100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 136283700 80086200 1 609600 1536 |
| 142294200 80086200 1 609600 1536 |
| 145317000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_4 0 -2 |
| U1.16 CON1.13 |
| 133388100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 138036300 84810600 1 609600 1536 |
| 140459700 87234000 1 609600 1536 |
| 145317000 87234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_0 0 -2 |
| U6.16 CON4.14 |
| 34175700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 30002700 39796500 1 609600 1536 |
| 19587000 39796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_1 0 -2 |
| U6.15 CON4.2 |
| 37985700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 31750200 41859000 1 609600 1536 |
| 23622000 41859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_2 0 -2 |
| U6.12 CON4.16 |
| 49415700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 36992700 48046500 1 609600 1536 |
| 19587000 48046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O2_3 0 -2 |
| U6.10 CON4.17 |
| 57035700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 40487700 52171500 1 609600 1536 |
| 19587000 52171500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_0 0 -2 |
| U6.14 CON4.15 |
| 41795700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 33497700 43921500 1 609600 1536 |
| 19587000 43921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_1 0 -2 |
| U6.13 CON4.3 |
| 45605700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 35245200 45984000 1 609600 1536 |
| 23622000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_2 0 -2 |
| U6.11 CON4.4 |
| 53225700 35623500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 38740200 50109000 1 609600 1536 |
| 23622000 50109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_3 0 -2 |
| U7.16 CON4.5 |
| 67208400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48864600 54234000 1 609600 1536 |
| 23622000 54234000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_4 0 -2 |
| U7.15 CON4.18 |
| 71018400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 50612100 56296500 1 609600 1536 |
| 19587000 56296500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_5 0 -2 |
| U7.14 CON4.6 |
| 74828400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 52359600 58359000 1 609600 1536 |
| 23622000 58359000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_6 0 -2 |
| U7.13 CON4.19 |
| 78638400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 55168800 59359800 1 609600 1536 |
| 25488900 59359800 1 609600 1536 |
| 24427200 60421500 1 609600 1536 |
| 19587000 60421500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O0_7 0 -2 |
| U7.12 CON4.7 |
| 82448400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57988200 60350400 1 609600 1536 |
| 27622500 60350400 1 609600 1536 |
| 25488900 62484000 1 609600 1536 |
| 23622000 62484000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_RTS 0 -2 |
| U7.11 CON4.20 |
| 86258400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57602100 64546500 1 609600 1536 |
| 19587000 64546500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* O_DTR 0 -2 |
| U7.10 CON4.8 |
| 90068400 35890200 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 73075800 52882800 1 609600 1536 |
| 71856600 52882800 1 609600 1536 |
| 58130400 66609000 1 609600 1536 |
| 23622000 66609000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_4 0 -2 |
| R4.2 CON4.10 |
| 91630500 76962000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 81419700 66751200 1 609600 1536 |
| 63627000 66751200 1 609600 1536 |
| 55519200 74859000 1 609600 1536 |
| 23622000 74859000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_5 0 -2 |
| R3.2 CON4.22 |
| 91630500 71628000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 85763100 65760600 1 609600 1536 |
| 63207900 65760600 1 609600 1536 |
| 56172000 72796500 1 609600 1536 |
| 19587000 72796500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_6 0 -2 |
| R1.2 CON4.21 |
| 91630500 60960000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 65189100 60960000 1 609600 1536 |
| 57477600 68671500 1 609600 1536 |
| 19587000 68671500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_7 0 -2 |
| R2.2 CON4.9 |
| 91630500 66294000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 88811100 66294000 1 609600 1536 |
| 87287100 64770000 1 609600 1536 |
| 62788800 64770000 1 609600 1536 |
| 56824800 70734000 1 609600 1536 |
| 23622000 70734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I1_3 0 -2 |
| R11.2 CON4.23 |
| 64960500 68580000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 56619000 76921500 1 609600 1536 |
| 19587000 76921500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_DSR 0 -2 |
| R12.2 CON4.11 |
| 64960500 74676000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 61760100 74676000 1 609600 1536 |
| 57452100 78984000 1 609600 1536 |
| 23622000 78984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_CTS 0 -2 |
| R13.2 CON4.24 |
| 64960500 80772000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 44005500 80772000 1 609600 1536 |
| 43731000 81046500 1 609600 1536 |
| 19587000 81046500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* I_RI 0 -2 |
| R14.2 CON4.12 |
| 64960500 86868000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 46253400 86868000 1 609600 1536 |
| 42494400 83109000 1 609600 1536 |
| 23622000 83109000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* BA1_3 0 -2 |
| CON1.15 U2.9 |
| 149577000 43921500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 151599900 45944400 1 609600 1536 |
| 151599900 48046500 1 609600 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 151599900 99098100 1 609600 1536 |
| 141427200 109270800 1 609600 1536 |
| 122377200 109270800 1 609600 1536 |
| 118643400 105537000 1 609600 1536 |
| 113919000 105537000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* TXD 0 -2 |
| D1.A CON3.3 |
| 81534000 93154500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 62068500 93154500 1 609600 1536 |
| 53721000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01853 0 -2 |
| U1.7 R1.1 |
| 121958100 61950600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 113957100 61950600 1 609600 1536 |
| 112966500 60960000 1 609600 1536 |
| 104965500 60960000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01906 0 -2 |
| U1.5 R2.1 |
| 121958100 69570600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 116243100 69570600 1 609600 1536 |
| 112966500 66294000 1 609600 1536 |
| 104965500 66294000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N01959 0 -2 |
| U1.3 R3.1 |
| 121958100 77190600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 118529100 77190600 1 609600 1536 |
| 112966500 71628000 1 609600 1536 |
| 104965500 71628000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02012 0 -2 |
| U1.1 R4.1 |
| 121958100 84810600 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 117881400 80733900 1 609600 1536 |
| 108737400 80733900 1 609600 1536 |
| 104965500 76962000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02164 0 -2 |
| U2.7 R11.1 |
| 110109000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 101841300 85839300 1 609600 1536 |
| 95097600 85839300 1 609600 1536 |
| 78295500 69037200 1 609600 1536 |
| 78295500 68580000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02168 0 -2 |
| U2.3 R13.1 |
| 94869000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 87896700 87134700 1 609600 1536 |
| 84658200 87134700 1 609600 1536 |
| 78295500 80772000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02134 0 -2 |
| U2.5 R12.1 |
| 102489000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 98221800 89839800 1 609600 1536 |
| 93459300 89839800 1 609600 1536 |
| 78295500 74676000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* N02160 0 -2 |
| U2.1 R14.1 |
| 87249000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 80010000 86868000 1 609600 1536 |
| 78295500 86868000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* GND 0 -2 |
| CON1.18 CON1.19 |
| 149577000 56296500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 60421500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.19 CON1.20 |
| 149577000 60421500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 64546500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.20 CON1.21 |
| 149577000 64546500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 68671500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.21 CON1.22 |
| 149577000 68671500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 72796500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.22 CON1.23 |
| 149577000 72796500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 76921500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.23 CON1.24 |
| 149577000 76921500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 81046500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.24 CON1.25 |
| 149577000 81046500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 85171500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON1.25 U1.15 |
| 149577000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 149577000 87210898 1 952500 1536 |
| 147329098 89458800 1 952500 1536 |
| 135178800 89458800 1 952500 1536 |
| 131368800 85648800 1 952500 1536 |
| 131368800 84810600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 83019900 1 952500 1536 |
| 133388100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.15 U1.13 |
| 133388100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 78981300 1 952500 1536 |
| 131368800 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 75399900 1 952500 1536 |
| 133388100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.13 U1.11 |
| 133388100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 71361300 1 952500 1536 |
| 131368800 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 67779900 1 952500 1536 |
| 133388100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.11 U1.9 |
| 133388100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 131368800 63741300 1 952500 1536 |
| 131368800 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 131368800 60159900 1 952500 1536 |
| 133388100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.9 U1.8 |
| 133388100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U1.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 105270300 33323283 1 952500 1536 |
| 109318425 37371408 1 952500 1536 |
| 109318425 45500925 1 952500 1536 |
| 121958100 58140600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.8 U1.6 |
| 121958100 58140600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 60159900 1 952500 1536 |
| 123977400 61950600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 63741300 1 952500 1536 |
| 121958100 65760600 65 952500 768 THERMAL TEARDROP P 90 90 |
| J2.1 U7.8 |
| 105270300 28041600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101365050 28041600 1 952500 1536 |
| 97783650 24460200 1 952500 1536 |
| 93878400 24460200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.6 U1.4 |
| 121958100 65760600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 67779900 1 952500 1536 |
| 123977400 69570600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 71361300 1 952500 1536 |
| 121958100 73380600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.4 U1.2 |
| 121958100 73380600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 123977400 75399900 1 952500 1536 |
| 123977400 77190600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 123977400 78981300 1 952500 1536 |
| 121958100 81000600 65 952500 768 THERMAL TEARDROP P 90 90 |
| U1.2 C1.C |
| 121958100 81000600 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 128016000 87058500 1 952500 1536 |
| 128016000 99822000 65 952500 768 THERMAL TEARDROP P 90 90 |
| C1.C U2.8 |
| 128016000 99822000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 122301000 94107000 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.6 U2.8 |
| 106299000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 108318300 96126300 1 952500 1536 |
| 111899700 96126300 1 952500 1536 |
| 113919000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.4 U2.6 |
| 98679000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 100698300 96126300 1 952500 1536 |
| 104279700 96126300 1 952500 1536 |
| 106299000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 U2.4 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 93078300 96126300 1 952500 1536 |
| 96659700 96126300 1 952500 1536 |
| 98679000 94107000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON3.5 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 82600800 96393000 1 952500 1536 |
| 67080000 96393000 1 952500 1536 |
| 61971000 101502000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U2.2 CON4.13 |
| 91059000 94107000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 87401400 97764600 1 952500 1536 |
| 83972400 97764600 1 952500 256 THERMAL TEARDROP P 90 90 N 90 90 |
| 83972400 92735400 1 952500 1536 |
| 81229200 89992200 1 952500 1536 |
| 47358300 89992200 1 952500 1536 |
| 44600100 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.25 CON4.13 |
| 19587000 85171500 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 21297900 86882400 1 952500 1536 |
| 21297900 86967300 1 952500 1536 |
| 21564600 87234000 1 952500 1536 |
| 23622000 87234000 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.8 U6.8 |
| 93878400 24460200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 26460450 1 952500 1536 |
| 63112650 26460450 1 952500 1536 |
| 60845700 24193500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* STROBE 0 -2 |
| U6.1 CON1.1 |
| 34175700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 48615600 9753600 1 609600 1536 |
| 117336600 9753600 1 609600 1536 |
| 145317000 37734000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D0 0 -2 |
| CON1.2 U6.3 |
| 145317000 41859000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 41859000 1 609600 1536 |
| 113325900 11734800 1 609600 1536 |
| 54254400 11734800 1 609600 1536 |
| 41795700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D1 0 -2 |
| U6.4 CON1.3 |
| 45605700 24193500 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 57073800 12725400 1 609600 1536 |
| 112058400 12725400 1 609600 1536 |
| 145317000 45984000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* DCD 0 -2 |
| J3.1 CON3.1 |
| 45339000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 45339000 97650300 1 609600 1536 |
| 45471000 97782300 1 609600 1536 |
| 45471000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D2 0 -2 |
| CON1.4 U6.6 |
| 145317000 50109000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143227559 50109000 1 609600 1536 |
| 107825159 14706600 1 609600 1536 |
| 62712600 14706600 1 609600 1536 |
| 53225700 24193500 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* RXD 0 -2 |
| J3.2 CON3.2 |
| 49149000 94107000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 49149000 97497900 1 609600 1536 |
| 49596000 97944900 1 609600 1536 |
| 49596000 101502000 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* D3 0 -2 |
| CON1.5 U7.1 |
| 145317000 54234000 1 609600 1280 THERMAL TEARDROP N 90 90 |
| 143450100 54234000 1 609600 1536 |
| 105903900 16687800 1 609600 1536 |
| 74980800 16687800 1 609600 1536 |
| 67208400 24460200 65 609600 768 THERMAL TEARDROP P 90 90 |
| *SIGNAL* +12V 0 -2 |
| J1.1 U7.9 |
| 105003600 39319200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 101155500 39319200 1 952500 1536 |
| 97726500 35890200 1 952500 1536 |
| 93878400 35890200 65 952500 768 THERMAL TEARDROP P 90 90 |
| U7.9 U6.9 |
| 93878400 35890200 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 91878150 33889950 1 952500 1536 |
| 65403484 33889950 1 952500 1536 |
| 63669934 35623500 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| CON4.1 U6.9 |
| 23622000 37734000 1 952500 1280 THERMAL TEARDROP N 90 90 |
| 27732750 33623250 1 952500 1536 |
| 58845450 33623250 1 952500 1536 |
| 60845700 35623500 65 952500 768 THERMAL TEARDROP P 90 90 |
| *POUR* POUR ITEMS |
| *REMARK* NAME TYPE XLOC YLOC PIECES FLAGS [OWNERNAME SIGNAME HATCHGRID HATCHRAD] |
| *REMARK* PIECETYPE CORNERS ARCS WIDTH LEVEL |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| HP26402539 POUROUT 6096000 119253000 1 0 HP26402539 GND |
| POLY 5 0 381000 1 |
| 2667000 -3048000 |
| 154686000 -3048000 |
| 154686000 -110490000 |
| 2667000 -110490000 |
| 2667000 -3048000 |
| ANP000003 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -630092783 -585044931 |
| -629958079 -584910227 2250 1519 |
| -629775891 -584854570 |
| -627954000 -584298000 1969 -68 |
| -629829001 -584634790 |
| -630016500 -584668469 101 1596 |
| -630203999 -584634790 |
| -632079000 -584298000 3498 -42 |
| -630233813 -584771647 |
| -630049295 -584819011 1656 593 |
| -630183999 -584953715 |
| -630092783 -585044931 |
| ANP000004 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -625967783 -585044931 |
| -625833079 -584910227 2250 1519 |
| -625650891 -584854570 |
| -623829000 -584298000 1969 -68 |
| -625704001 -584634790 |
| -625891500 -584668469 101 1596 |
| -626078999 -584634790 |
| -627954000 -584298000 3498 -42 |
| -626108813 -584771647 |
| -625924295 -584819011 1656 593 |
| -626058999 -584953715 |
| -625967783 -585044931 |
| ANP000005 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -635963391 -579481430 |
| -636145579 -579425773 3430 1519 |
| -636280283 -579291069 |
| -636371499 -579382285 |
| -636236795 -579516989 1350 593 |
| -636421313 -579564353 |
| -638266500 -580038000 143 -42 |
| -636391499 -579701210 |
| -636204000 -579667531 1901 1596 |
| -636016501 -579701210 |
| -634141500 -580038000 1698 -68 |
| -635963391 -579481430 |
| ANP000006 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 13 8 381000 1 |
| -629752196 -576663912 |
| -629886900 -576529208 3150 1350 |
| -629886900 -576338708 |
| -633249014 -576338708 |
| -633249014 -576529208 900 450 |
| -633383718 -576394504 |
| -634888431 -577899217 |
| -634753727 -578033921 1350 1519 |
| -634698070 -578216109 |
| -634141500 -580038000 1069 -968 |
| -632266499 -579701210 |
| -632079000 -579667531 1901 1596 |
| -631891501 -579701210 |
| -630016500 -580038000 1698 -492 |
| -630986326 -578398338 |
| -631083308 -578234372 3006 593 |
| -630892808 -578234372 |
| -630892808 -578167502 |
| -630016500 -578167502 1800 -450 |
| -630636143 -577547859 |
| -629752196 -576663912 |
| ANP000008 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 33 21 381000 1 |
| -597682500 -582155714 |
| -597817204 -582021010 3150 1576 |
| -597890583 -581845210 |
| -598551000 -580263000 2926 -785 |
| -599971455 -581223128 |
| -600129283 -581329808 340 559 |
| -600129283 -581139308 |
| -600951300 -581139308 |
| -600951300 -580263000 2700 -450 |
| -601570943 -580882643 |
| -602210982 -580242604 |
| -602345686 -580377308 450 450 |
| -602345686 -580186808 |
| -602687717 -580186808 |
| -602687717 -580377308 900 559 |
| -602845545 -580270628 |
| -604266000 -579310500 3259 -2159 |
| -604850985 -577698876 |
| -604915983 -577519808 2899 1600 |
| -604915983 -577329308 |
| -627860112 -577329308 |
| -627860112 -577519808 900 450 |
| -627994816 -577385104 |
| -628861442 -578251730 |
| -628726738 -578386434 1350 970 |
| -628843989 -578536576 |
| -630016500 -580038000 520 -418 |
| -628141499 -579701210 |
| -627954000 -579667531 1901 1596 |
| -627766501 -579701210 |
| -625891500 -580038000 1698 -1392 |
| -624251838 -579068174 |
| -624087872 -578971192 2106 593 |
| -624087872 -579161692 |
| -622893300 -579161692 |
| -622893300 -580038000 900 -450 |
| -622273657 -579418357 |
| -617301724 -584390290 |
| -617167020 -584255586 2250 1653 |
| -617002595 -584159384 |
| -613599000 -582168000 2103 -2857 |
| -612605439 -585984138 |
| -612557441 -586168492 1045 1654 |
| -612557441 -586358992 |
| -607527286 -586358992 |
| -607527286 -586168492 2700 450 |
| -607392582 -586303196 |
| -605457143 -584367757 |
| -604837500 -584987400 1350 -450 |
| -604837500 -584111092 |
| -599716786 -584111092 |
| -599716786 -583920592 2700 450 |
| -599582082 -584055296 |
| -597682500 -582155714 |
| ANP000014 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 15 12 381000 1 |
| -536559790 -640003499 |
| -536593469 -639816000 2801 1596 |
| -536559790 -639628501 |
| -536223000 -637753500 2598 -492 |
| -537862662 -638723326 |
| -538026628 -638820308 306 593 |
| -538026628 -638629808 |
| -538639159 -638629808 |
| -538639159 -638820308 900 1183 |
| -538806780 -638910825 |
| -540483000 -639816000 283 -1081 |
| -540146210 -641691001 |
| -540112531 -641878500 1001 1596 |
| -540146210 -642065999 |
| -540483000 -643941000 798 -1081 |
| -538806780 -644846175 |
| -538639159 -644936692 1516 1183 |
| -538639159 -645127192 |
| -538026628 -645127192 |
| -538026628 -644936692 2700 593 |
| -537862662 -645033674 |
| -536223000 -646003500 1493 -492 |
| -536559790 -644128499 |
| -536593469 -643941000 2801 1596 |
| -536559790 -643753501 |
| -536223000 -641878500 2598 -1596 |
| -536559790 -640003499 |
| ANP000015 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -602888817 |
| -535076408 -602493183 |
| -535266908 -602493183 0 1171 |
| -535353825 -602323667 |
| -536223000 -600628500 2971 -169 |
| -535886210 -602503501 |
| -535852531 -602691000 1001 1596 |
| -535886210 -602878499 |
| -536223000 -604753500 798 -169 |
| -535353825 -603058333 |
| -535266908 -602888817 2428 1171 |
| -535076408 -602888817 |
| ANP000016 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -607013817 |
| -535076408 -606618183 |
| -535266908 -606618183 0 1171 |
| -535353825 -606448667 |
| -536223000 -604753500 2971 -169 |
| -535886210 -606628501 |
| -535852531 -606816000 1001 1596 |
| -535886210 -607003499 |
| -536223000 -608878500 798 -169 |
| -535353825 -607183333 |
| -535266908 -607013817 2428 1171 |
| -535076408 -607013817 |
| ANP000017 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -611138817 |
| -535076408 -610743183 |
| -535266908 -610743183 0 1171 |
| -535353825 -610573667 |
| -536223000 -608878500 2971 -169 |
| -535886210 -610753501 |
| -535852531 -610941000 1001 1596 |
| -535886210 -611128499 |
| -536223000 -613003500 798 -169 |
| -535353825 -611308333 |
| -535266908 -611138817 2428 1171 |
| -535076408 -611138817 |
| ANP000018 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -615263817 |
| -535076408 -614868183 |
| -535266908 -614868183 0 1171 |
| -535353825 -614698667 |
| -536223000 -613003500 2971 -169 |
| -535886210 -614878501 |
| -535852531 -615066000 1001 1596 |
| -535886210 -615253499 |
| -536223000 -617128500 798 -169 |
| -535353825 -615433333 |
| -535266908 -615263817 2428 1171 |
| -535076408 -615263817 |
| ANP000019 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -619388817 |
| -535076408 -618993183 |
| -535266908 -618993183 0 1171 |
| -535353825 -618823667 |
| -536223000 -617128500 2971 -169 |
| -535886210 -619003501 |
| -535852531 -619191000 1001 1596 |
| -535886210 -619378499 |
| -536223000 -621253500 798 -169 |
| -535353825 -619558333 |
| -535266908 -619388817 2428 1171 |
| -535076408 -619388817 |
| ANP000020 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -623513817 |
| -535076408 -623118183 |
| -535266908 -623118183 0 1171 |
| -535353825 -622948667 |
| -536223000 -621253500 2971 -169 |
| -535886210 -623128501 |
| -535852531 -623316000 1001 1596 |
| -535886210 -623503499 |
| -536223000 -625378500 798 -169 |
| -535353825 -623683333 |
| -535266908 -623513817 2428 1171 |
| -535076408 -623513817 |
| ANP000021 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -627638817 |
| -535076408 -627243183 |
| -535266908 -627243183 0 1171 |
| -535353825 -627073667 |
| -536223000 -625378500 2971 -169 |
| -535886210 -627253501 |
| -535852531 -627441000 1001 1596 |
| -535886210 -627628499 |
| -536223000 -629503500 798 -169 |
| -535353825 -627808333 |
| -535266908 -627638817 2428 1171 |
| -535076408 -627638817 |
| ANP000022 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535076408 -631763817 |
| -535076408 -631368183 |
| -535266908 -631368183 0 1171 |
| -535353825 -631198667 |
| -536223000 -629503500 2971 -169 |
| -535886210 -631378501 |
| -535852531 -631566000 1001 1596 |
| -535886210 -631753499 |
| -536223000 -633628500 798 -169 |
| -535353825 -631933333 |
| -535266908 -631763817 2428 1171 |
| -535076408 -631763817 |
| ANP000024 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -535476069 -639892283 |
| -535610773 -639757579 3150 1519 |
| -535666430 -639575391 |
| -536223000 -637753500 2869 -68 |
| -535886210 -639628501 |
| -535852531 -639816000 1001 1596 |
| -535886210 -640003499 |
| -536223000 -641878500 798 -42 |
| -535749353 -640033313 |
| -535701989 -639848795 2556 593 |
| -535567285 -639983499 |
| -535476069 -639892283 |
| ANP000030 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -604940999 |
| -540853469 -604753500 2801 1596 |
| -540819790 -604566001 |
| -540483000 -602691000 2598 -42 |
| -540956647 -604536187 |
| -541004011 -604720705 756 593 |
| -541138715 -604586001 |
| -541229931 -604677217 |
| -541095227 -604811921 1350 1519 |
| -541039570 -604994109 |
| -540483000 -606816000 1069 -68 |
| -540819790 -604940999 |
| ANP000031 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -609065999 |
| -540853469 -608878500 2801 1596 |
| -540819790 -608691001 |
| -540483000 -606816000 2598 -42 |
| -540956647 -608661187 |
| -541004011 -608845705 756 593 |
| -541138715 -608711001 |
| -541229931 -608802217 |
| -541095227 -608936921 1350 1519 |
| -541039570 -609119109 |
| -540483000 -610941000 1069 -68 |
| -540819790 -609065999 |
| ANP000032 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -613190999 |
| -540853469 -613003500 2801 1596 |
| -540819790 -612816001 |
| -540483000 -610941000 2598 -42 |
| -540956647 -612786187 |
| -541004011 -612970705 756 593 |
| -541138715 -612836001 |
| -541229931 -612927217 |
| -541095227 -613061921 1350 1519 |
| -541039570 -613244109 |
| -540483000 -615066000 1069 -68 |
| -540819790 -613190999 |
| ANP000033 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -617315999 |
| -540853469 -617128500 2801 1596 |
| -540819790 -616941001 |
| -540483000 -615066000 2598 -42 |
| -540956647 -616911187 |
| -541004011 -617095705 756 593 |
| -541138715 -616961001 |
| -541229931 -617052217 |
| -541095227 -617186921 1350 1519 |
| -541039570 -617369109 |
| -540483000 -619191000 1069 -68 |
| -540819790 -617315999 |
| ANP000034 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -621440999 |
| -540853469 -621253500 2801 1596 |
| -540819790 -621066001 |
| -540483000 -619191000 2598 -42 |
| -540956647 -621036187 |
| -541004011 -621220705 756 593 |
| -541138715 -621086001 |
| -541229931 -621177217 |
| -541095227 -621311921 1350 1519 |
| -541039570 -621494109 |
| -540483000 -623316000 1069 -68 |
| -540819790 -621440999 |
| ANP000035 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -625565999 |
| -540853469 -625378500 2801 1596 |
| -540819790 -625191001 |
| -540483000 -623316000 2598 -42 |
| -540956647 -625161187 |
| -541004011 -625345705 756 593 |
| -541138715 -625211001 |
| -541229931 -625302217 |
| -541095227 -625436921 1350 1519 |
| -541039570 -625619109 |
| -540483000 -627441000 1069 -68 |
| -540819790 -625565999 |
| ANP000036 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -629690999 |
| -540853469 -629503500 2801 1596 |
| -540819790 -629316001 |
| -540483000 -627441000 2598 -42 |
| -540956647 -629286187 |
| -541004011 -629470705 756 593 |
| -541138715 -629336001 |
| -541229931 -629427217 |
| -541095227 -629561921 1350 1519 |
| -541039570 -629744109 |
| -540483000 -631566000 1069 -68 |
| -540819790 -629690999 |
| ANP000037 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 7 5 381000 1 |
| -540819790 -642065999 |
| -540853469 -641878500 2801 1596 |
| -540819790 -641691001 |
| -540483000 -639816000 2598 -42 |
| -540956647 -641661187 |
| -541004011 -641845705 756 593 |
| -541138715 -641711001 |
| -541229931 -641802217 |
| -541095227 -641936921 1350 1519 |
| -541039570 -642119109 |
| -540483000 -643941000 1069 -68 |
| -540819790 -642065999 |
| ANP000078 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -605910825 |
| -664021841 -605820308 3316 1183 |
| -664021841 -605629808 |
| -664409372 -605629808 |
| -664409372 -605820308 900 593 |
| -664573338 -605723326 |
| -666213000 -604753500 3293 -492 |
| -665876210 -606628501 |
| -665842531 -606816000 1001 1596 |
| -665876210 -607003499 |
| -666213000 -608878500 798 -492 |
| -664573338 -607908674 |
| -664409372 -607811692 2106 593 |
| -664409372 -608002192 |
| -664021841 -608002192 |
| -664021841 -607811692 2700 1183 |
| -663854220 -607721175 |
| -662178000 -606816000 2083 -567 |
| -663854220 -605910825 |
| ANP000079 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -610035825 |
| -664021841 -609945308 3316 1183 |
| -664021841 -609754808 |
| -664409372 -609754808 |
| -664409372 -609945308 900 593 |
| -664573338 -609848326 |
| -666213000 -608878500 3293 -492 |
| -665876210 -610753501 |
| -665842531 -610941000 1001 1596 |
| -665876210 -611128499 |
| -666213000 -613003500 798 -492 |
| -664573338 -612033674 |
| -664409372 -611936692 2106 593 |
| -664409372 -612127192 |
| -664021841 -612127192 |
| -664021841 -611936692 2700 1183 |
| -663854220 -611846175 |
| -662178000 -610941000 2083 -567 |
| -663854220 -610035825 |
| ANP000080 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -614160825 |
| -664021841 -614070308 3316 1183 |
| -664021841 -613879808 |
| -664409372 -613879808 |
| -664409372 -614070308 900 593 |
| -664573338 -613973326 |
| -666213000 -613003500 3293 -492 |
| -665876210 -614878501 |
| -665842531 -615066000 1001 1596 |
| -665876210 -615253499 |
| -666213000 -617128500 798 -492 |
| -664573338 -616158674 |
| -664409372 -616061692 2106 593 |
| -664409372 -616252192 |
| -664021841 -616252192 |
| -664021841 -616061692 2700 1183 |
| -663854220 -615971175 |
| -662178000 -615066000 2083 -567 |
| -663854220 -614160825 |
| ANP000081 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -618285825 |
| -664021841 -618195308 3316 1183 |
| -664021841 -618004808 |
| -664409372 -618004808 |
| -664409372 -618195308 900 593 |
| -664573338 -618098326 |
| -666213000 -617128500 3293 -492 |
| -665876210 -619003501 |
| -665842531 -619191000 1001 1596 |
| -665876210 -619378499 |
| -666213000 -621253500 798 -492 |
| -664573338 -620283674 |
| -664409372 -620186692 2106 593 |
| -664409372 -620377192 |
| -664021841 -620377192 |
| -664021841 -620186692 2700 1183 |
| -663854220 -620096175 |
| -662178000 -619191000 2083 -567 |
| -663854220 -618285825 |
| ANP000082 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -622410825 |
| -664021841 -622320308 3316 1183 |
| -664021841 -622129808 |
| -664409372 -622129808 |
| -664409372 -622320308 900 593 |
| -664573338 -622223326 |
| -666213000 -621253500 3293 -492 |
| -665876210 -623128501 |
| -665842531 -623316000 1001 1596 |
| -665876210 -623503499 |
| -666213000 -625378500 798 -492 |
| -664573338 -624408674 |
| -664409372 -624311692 2106 593 |
| -664409372 -624502192 |
| -664021841 -624502192 |
| -664021841 -624311692 2700 1183 |
| -663854220 -624221175 |
| -662178000 -623316000 2083 -567 |
| -663854220 -622410825 |
| ANP000083 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -626535825 |
| -664021841 -626445308 3316 1183 |
| -664021841 -626254808 |
| -664409372 -626254808 |
| -664409372 -626445308 900 593 |
| -664573338 -626348326 |
| -666213000 -625378500 3293 -492 |
| -665876210 -627253501 |
| -665842531 -627441000 1001 1596 |
| -665876210 -627628499 |
| -666213000 -629503500 798 -492 |
| -664573338 -628533674 |
| -664409372 -628436692 2106 593 |
| -664409372 -628627192 |
| -664021841 -628627192 |
| -664021841 -628436692 2700 1183 |
| -663854220 -628346175 |
| -662178000 -627441000 2083 -567 |
| -663854220 -626535825 |
| ANP000084 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -630660825 |
| -664021841 -630570308 3316 1183 |
| -664021841 -630379808 |
| -664409372 -630379808 |
| -664409372 -630570308 900 593 |
| -664573338 -630473326 |
| -666213000 -629503500 3293 -492 |
| -665876210 -631378501 |
| -665842531 -631566000 1001 1596 |
| -665876210 -631753499 |
| -666213000 -633628500 798 -492 |
| -664573338 -632658674 |
| -664409372 -632561692 2106 593 |
| -664409372 -632752192 |
| -664021841 -632752192 |
| -664021841 -632561692 2700 1183 |
| -663854220 -632471175 |
| -662178000 -631566000 2083 -567 |
| -663854220 -630660825 |
| ANP000085 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -634785825 |
| -664021841 -634695308 3316 1183 |
| -664021841 -634504808 |
| -664409372 -634504808 |
| -664409372 -634695308 900 593 |
| -664573338 -634598326 |
| -666213000 -633628500 3293 -492 |
| -665876210 -635503501 |
| -665842531 -635691000 1001 1596 |
| -665876210 -635878499 |
| -666213000 -637753500 798 -492 |
| -664573338 -636783674 |
| -664409372 -636686692 2106 593 |
| -664409372 -636877192 |
| -664021841 -636877192 |
| -664021841 -636686692 2700 1183 |
| -663854220 -636596175 |
| -662178000 -635691000 2083 -567 |
| -663854220 -634785825 |
| ANP000086 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -638910825 |
| -664021841 -638820308 3316 1183 |
| -664021841 -638629808 |
| -664409372 -638629808 |
| -664409372 -638820308 900 593 |
| -664573338 -638723326 |
| -666213000 -637753500 3293 -492 |
| -665876210 -639628501 |
| -665842531 -639816000 1001 1596 |
| -665876210 -640003499 |
| -666213000 -641878500 798 -492 |
| -664573338 -640908674 |
| -664409372 -640811692 2106 593 |
| -664409372 -641002192 |
| -664021841 -641002192 |
| -664021841 -640811692 2700 1183 |
| -663854220 -640721175 |
| -662178000 -639816000 2083 -567 |
| -663854220 -638910825 |
| ANP000087 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 11 8 381000 1 |
| -663854220 -643035825 |
| -664021841 -642945308 3316 1183 |
| -664021841 -642754808 |
| -664409372 -642754808 |
| -664409372 -642945308 900 593 |
| -664573338 -642848326 |
| -666213000 -641878500 3293 -492 |
| -665876210 -643753501 |
| -665842531 -643941000 1001 1596 |
| -665876210 -644128499 |
| -666213000 -646003500 798 -492 |
| -664573338 -645033674 |
| -664409372 -644936692 2106 593 |
| -664409372 -645127192 |
| -664021841 -645127192 |
| -664021841 -644936692 2700 1183 |
| -663854220 -644846175 |
| -662178000 -643941000 2083 -567 |
| -663854220 -643035825 |
| ANP000088 HATOUT 685800000 685800000 1 0 HP26402539 |
| POLY 569 432 381000 1 |
| -525208500 -676656000 |
| -525208500 -569976000 |
| -525399000 -569976000 0 900 |
| -525399000 -569785500 |
| -676656000 -569785500 |
| -676656000 -569976000 900 900 |
| -676846500 -569976000 |
| -676846500 -676656000 |
| -676656000 -676656000 1800 900 |
| -676656000 -676846500 |
| -638083494 -676846500 |
| -638083494 -676656000 2700 1350 |
| -637948790 -676521296 |
| -651093282 -663376804 |
| -651227986 -663511508 450 450 |
| -651227986 -663321008 |
| -652767300 -663321008 |
| -652767300 -662749500 2700 -900 |
| -653338808 -662749500 |
| -653338808 -660463500 |
| -652767300 -660463500 1800 -900 |
| -652767300 -659891992 |
| -650481300 -659891992 |
| -650481300 -660463500 900 -900 |
| -649909792 -660463500 |
| -649909792 -661598692 |
| -649719292 -661598692 1800 23 |
| -649909632 -661606500 |
| -649719292 -661614308 1776 23 |
| -649909792 -661614308 |
| -649909792 -662002814 |
| -649719292 -662002814 1800 450 |
| -649853996 -662137518 |
| -649800032 -662191482 |
| -649665328 -662056778 2250 1486 |
| -649480226 -662011750 |
| -647814300 -661606500 1936 -134 |
| -649528794 -661613527 |
| -649719292 -661614308 2 21 |
| -649528952 -661606500 |
| -649719292 -661598692 3576 21 |
| -649528794 -661599473 |
| -647814300 -661606500 1797 -1795 |
| -646099799 -661601531 |
| -645909300 -661600979 1801 14 |
| -646099720 -661606500 |
| -645909300 -661612021 1783 14 |
| -646099799 -661611469 |
| -647814300 -661606500 3598 -107 |
| -646130974 -661932000 |
| -645943939 -661968167 1690 559 |
| -646078643 -662102871 |
| -645990032 -662191482 |
| -645855328 -662056778 2250 1486 |
| -645670226 -662011750 |
| -644004300 -661606500 1936 -135 |
| -645718801 -661611469 |
| -645909300 -661612021 1 14 |
| -645718880 -661606500 |
| -645909300 -661600979 3583 14 |
| -645718801 -661601531 |
| -644004300 -661606500 1798 -1796 |
| -642289799 -661601531 |
| -642099300 -661600979 1801 14 |
| -642289720 -661606500 |
| -642099300 -661612021 1783 14 |
| -642289799 -661611469 |
| -644004300 -661606500 3598 -107 |
| -642320974 -661932000 |
| -642133939 -661968167 1690 559 |
| -642268643 -662102871 |
| -642180032 -662191482 |
| -642045328 -662056778 2250 1486 |
| -641860226 -662011750 |
| -640194300 -661606500 1936 -135 |
| -641908801 -661611469 |
| -642099300 -661612021 1 14 |
| -641908880 -661606500 |
| -642099300 -661600979 3583 14 |
| -641908801 -661601531 |
| -640194300 -661606500 1798 -1796 |
| -638479799 -661601531 |
| -638289300 -661600979 1801 14 |
| -638479720 -661606500 |
| -638289300 -661612021 1783 14 |
| -638479799 -661611469 |
| -640194300 -661606500 3598 -107 |
| -638510974 -661932000 |
| -638323939 -661968167 1690 559 |
| -638458643 -662102871 |
| -638370032 -662191482 |
| -638235328 -662056778 2250 1486 |
| -638050226 -662011750 |
| -636384300 -661606500 1936 -135 |
| -638098801 -661611469 |
| -638289300 -661612021 1 14 |
| -638098880 -661606500 |
| -638289300 -661600979 3583 14 |
| -638098801 -661601531 |
| -636384300 -661606500 1798 -1796 |
| -634669799 -661601531 |
| -634479300 -661600979 1801 14 |
| -634669720 -661606500 |
| -634479300 -661612021 1783 14 |
| -634669799 -661611469 |
| -636384300 -661606500 3598 -107 |
| -634700974 -661932000 |
| -634513939 -661968167 1690 559 |
| -634648643 -662102871 |
| -634560032 -662191482 |
| -634425328 -662056778 2250 1486 |
| -634240226 -662011750 |
| -632574300 -661606500 1936 -135 |
| -634288801 -661611469 |
| -634479300 -661612021 1 14 |
| -634288880 -661606500 |
| -634479300 -661600979 3583 14 |
| -634288801 -661601531 |
| -632574300 -661606500 1798 -1796 |
| -630859799 -661601531 |
| -630669300 -661600979 1801 14 |
| -630859720 -661606500 |
| -630669300 -661612021 1783 14 |
| -630859799 -661611469 |
| -632574300 -661606500 3598 -107 |
| -630890974 -661932000 |
| -630703939 -661968167 1690 559 |
| -630838643 -662102871 |
| -630750032 -662191482 |
| -630615328 -662056778 2250 1486 |
| -630430226 -662011750 |
| -628764300 -661606500 1936 -135 |
| -630478801 -661611469 |
| -630669300 -661612021 1 14 |
| -630478880 -661606500 |
| -630669300 -661600979 3583 14 |
| -630478801 -661601531 |
| -628764300 -661606500 1798 -1796 |
| -627049799 -661601531 |
| -626859300 -661600979 1801 14 |
| -627049720 -661606500 |
| -626859300 -661612021 1783 14 |
| -627049799 -661611469 |
| -628764300 -661606500 3598 -107 |
| -627080974 -661932000 |
| -626893939 -661968167 1690 559 |
| -627028643 -662102871 |
| -626940032 -662191482 |
| -626805328 -662056778 2250 1486 |
| -626620226 -662011750 |
| -624954300 -661606500 1936 -135 |
| -626668801 -661611469 |
| -626859300 -661612021 1 14 |
| -626668880 -661606500 |
| -626859300 -661600979 3583 14 |
| -626668801 -661601531 |
| -624954300 -661606500 1798 -2835 |
| -625359550 -663272426 |
| -625404578 -663457528 763 1486 |
| -625539282 -663592232 |
| -619960818 -669170696 |
| -619826114 -669035992 2250 450 |
| -619826114 -669226492 |
| -612404102 -669226492 |
| -612404102 -669035992 2700 1350 |
| -612269398 -668901288 |
| -618060582 -663110104 |
| -618195286 -663244808 450 450 |
| -618195286 -663054308 |
| -619734600 -663054308 |
| -619734600 -662482800 2700 -900 |
| -620306108 -662482800 |
| -620306108 -660196800 |
| -619734600 -660196800 1800 -900 |
| -619734600 -659625292 |
| -617448600 -659625292 |
| -617448600 -660196800 900 -900 |
| -616877092 -660196800 |
| -616877092 -661331992 |
| -616686592 -661331992 1800 23 |
| -616876932 -661339800 |
| -616686592 -661347608 1776 23 |
| -616877092 -661347608 |
| -616877092 -661736114 |
| -616686592 -661736114 1800 450 |
| -616821296 -661870818 |
| -616767332 -661924782 |
| -616632628 -661790078 2250 1486 |
| -616447526 -661745050 |
| -614781600 -661339800 1936 -134 |
| -616496094 -661346827 |
| -616686592 -661347608 2 21 |
| -616496252 -661339800 |
| -616686592 -661331992 3576 21 |
| -616496094 -661332773 |
| -614781600 -661339800 1797 -1795 |
| -613067099 -661334831 |
| -612876600 -661334279 1801 14 |
| -613067020 -661339800 |
| -612876600 -661345321 1783 14 |
| -613067099 -661344769 |
| -614781600 -661339800 3598 -107 |
| -613098274 -661665300 |
| -612911239 -661701467 1690 559 |
| -613045943 -661836171 |
| -612957332 -661924782 |
| -612822628 -661790078 2250 1486 |
| -612637526 -661745050 |
| -610971600 -661339800 1936 -135 |
| -612686101 -661344769 |
| -612876600 -661345321 1 14 |
| -612686180 -661339800 |
| -612876600 -661334279 3583 14 |
| -612686101 -661334831 |
| -610971600 -661339800 1798 -1796 |
| -609257099 -661334831 |
| -609066600 -661334279 1801 14 |
| -609257020 -661339800 |
| -609066600 -661345321 1783 14 |
| -609257099 -661344769 |
| -610971600 -661339800 3598 -107 |
| -609288274 -661665300 |
| -609101239 -661701467 1690 559 |
| -609235943 -661836171 |
| -609147332 -661924782 |
| -609012628 -661790078 2250 1486 |
| -608827526 -661745050 |
| -607161600 -661339800 1936 -135 |
| -608876101 -661344769 |
| -609066600 -661345321 1 14 |
| -608876180 -661339800 |
| -609066600 -661334279 3583 14 |
| -608876101 -661334831 |
| -607161600 -661339800 1798 -1796 |
| -605447099 -661334831 |
| -605256600 -661334279 1801 14 |
| -605447020 -661339800 |
| -605256600 -661345321 1783 14 |
| -605447099 -661344769 |
| -607161600 -661339800 3598 -107 |
| -605478274 -661665300 |
| -605291239 -661701467 1690 559 |
| -605425943 -661836171 |
| -605337332 -661924782 |
| -605202628 -661790078 2250 1486 |
| -605017526 -661745050 |
| -603351600 -661339800 1936 -135 |
| -605066101 -661344769 |
| -605256600 -661345321 1 14 |
| -605066180 -661339800 |
| -605256600 -661334279 3583 14 |
| -605066101 -661334831 |
| -603351600 -661339800 1798 -1796 |
| -601637099 -661334831 |
| -601446600 -661334279 1801 14 |
| -601637020 -661339800 |
| -601446600 -661345321 1783 14 |
| -601637099 -661344769 |
| -603351600 -661339800 3598 -107 |
| -601668274 -661665300 |
| -601481239 -661701467 1690 559 |
| -601615943 -661836171 |
| -601527332 -661924782 |
| -601392628 -661790078 2250 1486 |
| -601207526 -661745050 |
| -599541600 -661339800 1936 -135 |
| -601256101 -661344769 |
| -601446600 -661345321 1 14 |
| -601256180 -661339800 |
| -601446600 -661334279 3583 14 |
| -601256101 -661334831 |
| -599541600 -661339800 1798 -1796 |
| -597827099 -661334831 |
| -597636600 -661334279 1801 14 |
| -597827020 -661339800 |
| -597636600 -661345321 1783 14 |
| -597827099 -661344769 |
| -599541600 -661339800 3598 -107 |
| -597858274 -661665300 |
| -597671239 -661701467 1690 559 |
| -597805943 -661836171 |
| -597717332 -661924782 |
| -597582628 -661790078 2250 1486 |
| -597397526 -661745050 |
| -595731600 -661339800 1936 -135 |
| -597446101 -661344769 |
| -597636600 -661345321 1 14 |
| -597446180 -661339800 |
| -597636600 -661334279 3583 14 |
| -597446101 -661334831 |
| -595731600 -661339800 1798 -1796 |
| -594017099 -661334831 |
| -593826600 -661334279 1801 14 |
| -594017020 -661339800 |
| -593826600 -661345321 1783 14 |
| -594017099 -661344769 |
| -595731600 -661339800 3598 -107 |
| -594048274 -661665300 |
| -593861239 -661701467 1690 559 |
| -593995943 -661836171 |
| -593907332 -661924782 |
| -593772628 -661790078 2250 1486 |
| -593587526 -661745050 |
| -591921600 -661339800 1936 -135 |
| -593636101 -661344769 |
| -593826600 -661345321 1 14 |
| -593636180 -661339800 |
| -593826600 -661334279 3583 14 |
| -593636101 -661334831 |
| -591921600 -661339800 1798 -2034 |
| -590350223 -662025593 |
| -590175626 -662101792 1564 1135 |
| -590175626 -662292292 |
| -583795471 -662292292 |
| -583795471 -662101792 2700 450 |
| -583660767 -662236496 |
| -581090775 -659666504 |
| -581225479 -659531800 3150 1135 |
| -581155901 -659354461 |
| -580529700 -657758400 2485 -2271 |
| -578933639 -657132199 |
| -578756300 -657062621 2014 1135 |
| -578621596 -657197325 |
| -573194104 -651769833 |
| -573328808 -651635129 3150 450 |
| -573138308 -651635129 |
| -573138308 -644589898 |
| -573328808 -644589898 0 538 |
| -573216513 -644436015 |
| -572262000 -643128000 2338 -2877 |
| -571307487 -644436015 |
| -571195192 -644589898 1261 538 |
| -571385692 -644589898 |
| -571385692 -650902433 |
| -571195192 -650902433 1800 1350 |
| -571060488 -651037137 |
| -570590824 -650567473 |
| -570725528 -650432769 3150 450 |
| -570535028 -650432769 |
| -570535028 -645096720 |
| -569658720 -645096720 1800 -450 |
| -570278363 -644477077 |
| -568581361 -642780075 |
| -568716065 -642645371 3150 538 |
| -568527848 -642615964 |
| -566928000 -642366000 1888 -2877 |
| -567177964 -643965848 |
| -567207371 -644154065 811 538 |
| -567342075 -644019361 |
| -568726616 -645403902 |
| -568591912 -645538606 1350 450 |
| -568782412 -645538606 |
| -568782412 -649700073 |
| -568591912 -649700073 1800 1350 |
| -568457208 -649834777 |
| -548465404 -629842973 |
| -548600108 -629708269 3150 450 |
| -548409608 -629708269 |
| -548409608 -622116300 |
| -547533300 -622116300 1800 -450 |
| -548152943 -621496657 |
| -542378001 -615721715 |
| -542512705 -615587011 3150 593 |
| -542328187 -615539647 |
| -540483000 -615066000 1943 -313 |
| -542304891 -614509430 |
| -542487079 -614453773 3430 1519 |
| -542621783 -614319069 |
| -545574296 -617271582 |
| -545439592 -617406286 1350 450 |
| -545630092 -617406286 |
| -545630092 -617943900 |
| -546506400 -617943900 0 -450 |
| -545886757 -618563543 |
| -550676243 -623353029 |
| -550541539 -623487733 1350 559 |
| -550728574 -623523900 |
| -552411900 -623849400 109 -1007 |
| -552406931 -625563901 |
| -552406379 -625754400 901 14 |
| -552411900 -625563980 |
| -552417421 -625754400 883 14 |
| -552416869 -625563901 |
| -552411900 -623849400 2698 -1796 |
| -552416869 -622134899 |
| -552417421 -621944400 2701 14 |
| -552411900 -622134820 |
| -552406379 -621944400 2683 14 |
| -552406931 -622134899 |
| -552411900 -623849400 898 -107 |
| -552086400 -622166074 |
| -552050233 -621979039 2590 559 |
| -551915529 -622113743 |
| -551826918 -622025132 |
| -551961622 -621890428 3150 1486 |
| -552006650 -621705326 |
| -552411900 -620039400 2836 -135 |
| -552406931 -621753901 |
| -552406379 -621944400 901 14 |
| -552411900 -621753980 |
| -552417421 -621944400 883 14 |
| -552416869 -621753901 |
| -552411900 -620039400 2698 -1796 |
| -552416869 -618324899 |
| -552417421 -618134400 2701 14 |
| -552411900 -618324820 |
| -552406379 -618134400 2683 14 |
| -552406931 -618324899 |
| -552411900 -620039400 898 -1035 |
| -550745974 -620444650 |
| -550560872 -620489678 1663 1486 |
| -550426168 -620624382 |
| -547438504 -617636718 |
| -547573208 -617502014 3150 450 |
| -547382708 -617502014 |
| -547382708 -616964400 |
| -546506400 -616964400 1800 -450 |
| -547126043 -616344757 |
| -542378001 -611596715 |
| -542512705 -611462011 3150 593 |
| -542328187 -611414647 |
| -540483000 -610941000 1943 -505 |
| -542021468 -609817535 |
| -542175314 -609705189 3238 1336 |
| -542200168 -609516317 |
| -542314500 -608647500 2774 -74 |
| -542314500 -609523808 |
| -544388114 -609523808 |
| -544388114 -609714308 900 450 |
| -544522818 -609579604 |
| -550676243 -615733029 |
| -550541539 -615867733 1350 559 |
| -550728574 -615903900 |
| -552411900 -616229400 109 -1007 |
| -552406931 -617943901 |
| -552406379 -618134400 901 14 |
| -552411900 -617943980 |
| -552417421 -618134400 883 14 |
| -552416869 -617943901 |
| -552411900 -616229400 2698 -1796 |
| -552416869 -614514899 |
| -552417421 -614324400 2701 14 |
| -552411900 -614514820 |
| -552406379 -614324400 2683 14 |
| -552406931 -614514899 |
| -552411900 -616229400 898 -107 |
| -552086400 -614546074 |
| -552050233 -614359039 2590 559 |
| -551915529 -614493743 |
| -551826918 -614405132 |
| -551961622 -614270428 3150 1486 |
| -552006650 -614085326 |
| -552411900 -612419400 2836 -135 |
| -552406931 -614133901 |
| -552406379 -614324400 901 14 |
| -552411900 -614133980 |
| -552417421 -614324400 883 14 |
| -552416869 -614133901 |
| -552411900 -612419400 2698 -1796 |
| -552416869 -610704899 |
| -552417421 -610514400 2701 14 |
| -552411900 -610704820 |
| -552406379 -610514400 2683 14 |
| -552406931 -610704899 |
| -552411900 -612419400 898 -1035 |
| -550745974 -612824650 |
| -550560872 -612869678 1663 1486 |
| -550426168 -613004382 |
| -545449643 -608027857 |
| -544830000 -608647500 1350 -450 |
| -544830000 -607771192 |
| -542756386 -607771192 |
| -542756386 -607580692 2700 450 |
| -542621682 -607715396 |
| -542378001 -607471715 |
| -542512705 -607337011 3150 593 |
| -542328187 -607289647 |
| -540483000 -606816000 1943 -313 |
| -542304891 -606259430 |
| -542487079 -606203773 3430 1519 |
| -542621783 -606069069 |
| -542886157 -606333443 |
| -543505800 -605713800 3150 -450 |
| -543505800 -606590108 |
| -549074414 -606590108 |
| -549074414 -606780608 900 450 |
| -549209118 -606645904 |
| -550676243 -608113029 |
| -550541539 -608247733 1350 559 |
| -550728574 -608283900 |
| -552411900 -608609400 109 -1007 |
| -552406931 -610323901 |
| -552406379 -610514400 901 14 |
| -552411900 -610323980 |
| -552417421 -610514400 883 14 |
| -552416869 -610323901 |
| -552411900 -608609400 2698 -1796 |
| -552416869 -606894899 |
| -552417421 -606704400 2701 14 |
| -552411900 -606894820 |
| -552406379 -606704400 2683 14 |
| -552406931 -606894899 |
| -552411900 -608609400 898 -107 |
| -552086400 -606926074 |
| -552050233 -606739039 2590 559 |
| -551915529 -606873743 |
| -551826918 -606785132 |
| -551961622 -606650428 3150 1486 |
| -552006650 -606465326 |
| -552411900 -604799400 2836 -135 |
| -552406931 -606513901 |
| -552406379 -606704400 901 14 |
| -552411900 -606513980 |
| -552417421 -606704400 883 14 |
| -552416869 -606513901 |
| -552411900 -604799400 2698 -1796 |
| -552416869 -603084899 |
| -552417421 -602894400 2701 14 |
| -552411900 -603084820 |
| -552406379 -602894400 2683 14 |
| -552406931 -603084899 |
| -552411900 -604799400 898 -1035 |
| -550745974 -605204650 |
| -550560872 -605249678 1663 1486 |
| -550426168 -605384382 |
| -550135943 -605094157 |
| -549516300 -605713800 1350 -450 |
| -549516300 -604837492 |
| -543947686 -604837492 |
| -543947686 -604646992 2700 450 |
| -543812982 -604781696 |
| -542378001 -603346715 |
| -542512705 -603212011 3150 593 |
| -542328187 -603164647 |
| -540483000 -602691000 1943 -942 |
| -540819790 -600815999 |
| -540853469 -600628500 2801 1596 |
| -540819790 -600441001 |
| -540483000 -598566000 2598 -492 |
| -542122662 -599535826 |
| -542286628 -599632808 306 593 |
| -542286628 -599442308 |
| -544898414 -599442308 |
| -544898414 -599632808 900 450 |
| -545033118 -599498104 |
| -547144057 -601609043 |
| -547763700 -600989400 3150 -450 |
| -547763700 -601865708 |
| -550833617 -601865708 |
| -550833617 -602056208 900 559 |
| -550991445 -601949528 |
| -552411900 -600989400 3259 -557 |
| -552406931 -602703901 |
| -552406379 -602894400 901 14 |
| -552411900 -602703980 |
| -552417421 -602894400 883 14 |
| -552416869 -602703901 |
| -552411900 -600989400 2698 -2357 |
| -550991445 -600029272 |
| -550833617 -599922592 2140 559 |
| -550833617 -600113092 |
| -548205586 -600113092 |
| -548205586 -599922592 2700 450 |
| -548070882 -600057296 |
| -545959943 -597946357 |
| -545340300 -598566000 1350 -450 |
| -545340300 -597689692 |
| -542286628 -597689692 |
| -542286628 -597499192 2700 593 |
| -542122662 -597596174 |
| -540483000 -598566000 1493 -2292 |
| -540146210 -600441001 |
| -540112531 -600628500 1001 1596 |
| -540146210 -600815999 |
| -540483000 -602691000 798 -1596 |
| -540146210 -604566001 |
| -540112531 -604753500 1001 1596 |
| -540146210 -604940999 |
| -540483000 -606816000 798 -1596 |
| -540146210 -608691001 |
| -540112531 -608878500 1001 1596 |
| -540146210 -609065999 |
| -540483000 -610941000 798 -1596 |
| -540146210 -612816001 |
| -540112531 -613003500 1001 1596 |
| -540146210 -613190999 |
| -540483000 -615066000 798 -1596 |
| -540146210 -616941001 |
| -540112531 -617128500 1001 1596 |
| -540146210 -617315999 |
| -540483000 -619191000 798 -1596 |
| -540146210 -621066001 |
| -540112531 -621253500 1001 1596 |
| -540146210 -621440999 |
| -540483000 -623316000 798 -1596 |
| -540146210 -625191001 |
| -540112531 -625378500 1001 1596 |
| -540146210 -625565999 |
| -540483000 -627441000 798 -1596 |
| -540146210 -629316001 |
| -540112531 -629503500 1001 1596 |
| -540146210 -629690999 |
| -540483000 -631566000 798 -1081 |
| -538806780 -632471175 |
| -538639159 -632561692 1516 1183 |
| -538639159 -632752192 |
| -538026628 -632752192 |
| -538026628 -632561692 2700 593 |
| -537862662 -632658674 |
| -536223000 -633628500 1493 -492 |
| -536559790 -631753499 |
| -536593469 -631566000 2801 1596 |
| -536559790 -631378501 |
| -536223000 -629503500 2598 -1596 |
| -536559790 -627628499 |
| -536593469 -627441000 2801 1596 |
| -536559790 -627253501 |
| -536223000 -625378500 2598 -1596 |
| -536559790 -623503499 |
| -536593469 -623316000 2801 1596 |
| -536559790 -623128501 |
| -536223000 -621253500 2598 -1596 |
| -536559790 -619378499 |
| -536593469 -619191000 2801 1596 |
| -536559790 -619003501 |
| -536223000 -617128500 2598 -1596 |
| -536559790 -615253499 |
| -536593469 -615066000 2801 1596 |
| -536559790 -614878501 |
| -536223000 -613003500 2598 -1596 |
| -536559790 -611128499 |
| -536593469 -610941000 2801 1596 |
| -536559790 -610753501 |
| -536223000 -608878500 2598 -1596 |
| -536559790 -607003499 |
| -536593469 -606816000 2801 1596 |
| -536559790 -606628501 |
| -536223000 -604753500 2598 -1596 |
| -536559790 -602878499 |
| -536593469 -602691000 2801 1596 |
| -536559790 -602503501 |
| -536223000 -600628500 2598 -1969 |
| -535353825 -598933333 |
| -535266908 -598763817 2428 1171 |
| -535076408 -598763817 |
| -535076408 -591041421 |
| -535266908 -591041421 0 1382 |
| -535409124 -590914674 |
| -538353000 -588291000 3182 -2296 |
| -538256965 -584348811 |
| -538252326 -584158368 2686 1363 |
| -538117622 -584023664 |
| -544679982 -577461304 |
| -544814686 -577596008 450 450 |
| -544814686 -577405508 |
| -555878992 -577405508 |
| -555878992 -577596008 900 900 |
| -556069492 -577596008 |
| -556069492 -579501000 |
| -556641000 -579501000 0 -900 |
| -556641000 -580072508 |
| -558927000 -580072508 |
| -558927000 -579501000 2700 -900 |
| -559498508 -579501000 |
| -559498508 -579424808 |
| -559689008 -579424808 0 900 |
| -559689008 -579234308 |
| -561228314 -579234308 |
| -561228314 -579424808 900 450 |
| -561363018 -579290104 |
| -564784357 -582711443 |
| -565404000 -582091800 3150 -450 |
| -565404000 -582968108 |
| -573862200 -582968108 |
| -573862200 -582091800 2700 -450 |
| -574481843 -582711443 |
| -575194629 -581998657 |
| -575329333 -582133361 450 559 |
| -575365500 -581946326 |
| -575691000 -580263000 2809 -218 |
| -576016500 -581946326 |
| -576052667 -582133361 790 559 |
| -576187371 -581998657 |
| -576900157 -582711443 |
| -577519800 -582091800 3150 -450 |
| -577519800 -582968108 |
| -581482200 -582968108 |
| -581482200 -582091800 2700 -450 |
| -582101843 -582711443 |
| -582814629 -581998657 |
| -582949333 -582133361 450 559 |
| -582985500 -581946326 |
| -583311000 -580263000 2809 -218 |
| -583636500 -581946326 |
| -583672667 -582133361 790 559 |
| -583807371 -581998657 |
| -584520157 -582711443 |
| -585139800 -582091800 3150 -450 |
| -585139800 -582968108 |
| -589102200 -582968108 |
| -589102200 -582091800 2700 -450 |
| -589721843 -582711443 |
| -590434629 -581998657 |
| -590569333 -582133361 450 559 |
| -590605500 -581946326 |
| -590931000 -580263000 2809 -1007 |
| -592645501 -580267969 |
| -592836000 -580268521 1 14 |
| -592645580 -580263000 |
| -592836000 -580257479 3583 14 |
| -592645501 -580258031 |
| -590931000 -580263000 1798 -484 |
| -592065523 -578977544 |
| -592191580 -578834716 3114 935 |
| -592056876 -578700012 |
| -592381184 -578375704 |
| -592515888 -578510408 450 450 |
| -592515888 -578319908 |
| -593994356 -578319908 |
| -593994356 -578510408 900 1569 |
| -594069020 -578685666 |
| -594741000 -580263000 669 -667 |
| -593026499 -580258031 |
| -592836000 -580257479 1801 14 |
| -593026420 -580263000 |
| -592836000 -580268521 1783 14 |
| -593026499 -580267969 |
| -594741000 -580263000 3598 -957 |
| -594917159 -581968434 |
| -594936732 -582157926 841 508 |
| -595071436 -582023222 |
| -598655257 -585607043 |
| -599274900 -584987400 3150 -450 |
| -599274900 -585863708 |
| -604395614 -585863708 |
| -604395614 -586054208 900 450 |
| -604530318 -585919504 |
| -606465757 -587854943 |
| -607085400 -587235300 3150 -450 |
| -607085400 -588111608 |
| -615696000 -588111608 |
| -615696000 -587235300 2700 -450 |
| -616315643 -587854943 |
| -623200482 -580970104 |
| -623335186 -581104808 450 450 |
| -623335186 -580914308 |
| -624087872 -580914308 |
| -624087872 -581104808 900 593 |
| -624251838 -581007826 |
| -625891500 -580038000 3293 -1392 |
| -627766501 -580374790 |
| -627954000 -580408469 101 1596 |
| -628141499 -580374790 |
| -630016500 -580038000 3498 -1596 |
| -631891501 -580374790 |
| -632079000 -580408469 101 1596 |
| -632266499 -580374790 |
| -634141500 -580038000 3498 -492 |
| -633171674 -581677662 |
| -633074692 -581841628 1206 593 |
| -633265192 -581841628 |
| -633265192 -582454159 |
| -633074692 -582454159 1800 1183 |
| -632984175 -582621780 |
| -632079000 -584298000 1183 -1081 |
| -630203999 -583961210 |
| -630016500 -583927531 1901 1596 |
| -629829001 -583961210 |
| -627954000 -584298000 1698 -1596 |
| -626078999 -583961210 |
| -625891500 -583927531 1901 1596 |
| -625704001 -583961210 |
| -623829000 -584298000 1698 -2768 |
| -624385570 -586119891 |
| -624441227 -586302079 730 1519 |
| -624575931 -586436783 |
| -624342829 -586669885 |
| -624962472 -587289528 450 -198 |
| -624168977 -586917665 |
| -623996480 -586836826 2051 198 |
| -624131184 -586971530 |
| -622587075 -588515639 |
| -622452371 -588380935 2250 538 |
| -622422964 -588569152 |
| -622173000 -590169000 988 -1500 |
| -621157564 -591430304 |
| -621038102 -591578692 1288 1411 |
| -621038102 -591769192 |
| -605844283 -591769192 |
| -605844283 -591578692 2700 559 |
| -605686455 -591685372 |
| -604266000 -592645500 1459 -2918 |
| -605686455 -593605628 |
| -605844283 -593712308 340 559 |
| -605844283 -593521808 |
| -623731500 -593521808 |
| -623731500 -592645500 2700 -450 |
| -624351143 -593265143 |
| -631423285 -586193001 |
| -631557989 -586327705 450 593 |
| -631605353 -586143187 |
| -632079000 -584298000 2843 -427 |
| -632984175 -585974220 |
| -633074692 -586141841 616 1183 |
| -633265192 -586141841 |
| -633265192 -587283614 |
| -633074692 -587283614 1800 450 |
| -633209396 -587418318 |
| -630588075 -590039639 |
| -630453371 -589904935 2250 538 |
| -630423964 -590093152 |
| -630174000 -591693000 988 -2877 |
| -631773848 -591443036 |
| -631962065 -591413629 3511 538 |
| -631827361 -591278925 |
| -634761143 -588345143 |
| -634141500 -587725500 2250 -270 |
| -634974931 -587996256 |
| -635156110 -588055115 179 1511 |
| -635343232 -588019398 |
| -636204000 -587855100 3491 -341 |
| -635584357 -588474743 |
| -635718896 -588609282 |
| -635584192 -588743986 1350 450 |
| -635774692 -588743986 |
| -635774692 -590114717 |
| -635584192 -590114717 1800 559 |
| -635690872 -590272545 |
| -636651000 -591693000 559 -2357 |
| -638365494 -591700027 |
| -638555992 -591700808 2 21 |
| -638365652 -591693000 |
| -638555992 -591685192 3576 21 |
| -638365494 -591685973 |
| -636651000 -591693000 1797 -557 |
| -637611128 -590272545 |
| -637717808 -590114717 3040 559 |
| -637527308 -590114717 |
| -637527308 -588302100 |
| -636651000 -588302100 1800 -450 |
| -637270643 -587682457 |
| -637136104 -587547918 |
| -637270808 -587413214 3150 450 |
| -637080308 -587413214 |
| -637080308 -586101628 |
| -637270808 -586101628 0 593 |
| -637173826 -585937662 |
| -636204000 -584298000 2393 -492 |
| -638079001 -584634790 |
| -638266500 -584668469 101 1596 |
| -638453999 -584634790 |
| -640329000 -584298000 3498 -492 |
| -639359174 -585937662 |
| -639262192 -586101628 1206 593 |
| -639452692 -586101628 |
| -639452692 -588017700 |
| -640329000 -588017700 0 -288 |
| -639561121 -588439929 |
| -639394192 -588531717 1511 288 |
| -639584692 -588531717 |
| -639584692 -589787992 |
| -639394192 -589787992 1800 900 |
| -639394192 -589978492 |
| -639318000 -589978492 |
| -639318000 -590550000 900 -900 |
| -638746492 -590550000 |
| -638746492 -591685192 |
| -638555992 -591685192 1800 23 |
| -638746332 -591693000 |
| -638555992 -591700808 1776 23 |
| -638746492 -591700808 |
| -638746492 -592836000 |
| -639318000 -592836000 0 -900 |
| -639318000 -593407508 |
| -641604000 -593407508 |
| -641604000 -592836000 2700 -900 |
| -642175508 -592836000 |
| -642175508 -590550000 |
| -641604000 -590550000 1800 -900 |
| -641604000 -589978492 |
| -641527808 -589978492 |
| -641527808 -589787992 2700 900 |
| -641337308 -589787992 |
| -641337308 -588149700 |
| -640461000 -588149700 1800 -288 |
| -641228879 -587727471 |
| -641395808 -587635683 3311 288 |
| -641205308 -587635683 |
| -641205308 -586101628 |
| -641395808 -586101628 0 593 |
| -641298826 -585937662 |
| -640329000 -584298000 2393 -2292 |
| -638453999 -583961210 |
| -638266500 -583927531 1901 1596 |
| -638079001 -583961210 |
| -636204000 -584298000 1698 -1081 |
| -635298825 -582621780 |
| -635208308 -582454159 2416 1183 |
| -635017808 -582454159 |
| -635017808 -581841628 |
| -635208308 -581841628 0 593 |
| -635111326 -581677662 |
| -634141500 -580038000 2393 -492 |
| -636016501 -580374790 |
| -636204000 -580408469 101 1596 |
| -636391499 -580374790 |
| -638266500 -580038000 3498 -2742 |
| -637792853 -578192813 |
| -637745489 -578008295 2556 593 |
| -637610785 -578142999 |
| -634310543 -574842757 |
| -633690900 -575462400 1350 -450 |
| -633690900 -574586092 |
| -584301600 -574586092 |
| -584301600 -575462400 900 -450 |
| -583681957 -574842757 |
| -579997371 -578527343 |
| -579862667 -578392639 2250 559 |
| -579826500 -578579674 |
| -579501000 -580263000 1009 -1007 |
| -577786499 -580258031 |
| -577596000 -580257479 1801 14 |
| -577786420 -580263000 |
| -577596000 -580268521 1783 14 |
| -577786499 -580267969 |
| -579501000 -580263000 3598 -135 |
| -577835074 -580668250 |
| -577649972 -580713278 1663 1486 |
| -577515268 -580847982 |
| -577426657 -580759371 |
| -577561361 -580624667 3150 559 |
| -577374326 -580588500 |
| -575691000 -580263000 1909 -107 |
| -577405501 -580267969 |
| -577596000 -580268521 1 14 |
| -577405580 -580263000 |
| -577596000 -580257479 3583 14 |
| -577405501 -580258031 |
| -575691000 -580263000 1798 -1796 |
| -573976499 -580258031 |
| -573786000 -580257479 1801 14 |
| -573976420 -580263000 |
| -573786000 -580268521 1783 14 |
| -573976499 -580267969 |
| -575691000 -580263000 3598 -107 |
| -574007674 -580588500 |
| -573820639 -580624667 1690 559 |
| -573955343 -580759371 |
| -573866732 -580847982 |
| -573732028 -580713278 2250 1486 |
| -573546926 -580668250 |
| -571881000 -580263000 1936 -135 |
| -573595501 -580267969 |
| -573786000 -580268521 1 14 |
| -573595580 -580263000 |
| -573786000 -580257479 3583 14 |
| -573595501 -580258031 |
| -571881000 -580263000 1798 -1457 |
| -570460545 -579302872 |
| -570302717 -579196192 2140 559 |
| -570302717 -579386692 |
| -567598486 -579386692 |
| -567598486 -579196192 2700 450 |
| -567463782 -579330896 |
| -564042443 -575909557 |
| -563422800 -576529200 1350 -450 |
| -563422800 -575652892 |
| -544372800 -575652892 |
| -544372800 -576529200 900 -450 |
| -543753157 -575909557 |
| -533580457 -586082257 |
| -534200100 -586701900 450 -450 |
| -533323792 -586701900 |
| -533323792 -637753500 |
| -533323792 -639855600 |
| -534200100 -639855600 0 -450 |
| -533580457 -640475243 |
| -534327999 -641222785 |
| -534193295 -641357489 1350 593 |
| -534377813 -641404853 |
| -536223000 -641878500 143 -942 |
| -535886210 -643753501 |
| -535852531 -643941000 1001 1596 |
| -535886210 -644128499 |
| -536223000 -646003500 798 -2292 |
| -537862662 -646973326 |
| -538026628 -647070308 306 593 |
| -538026628 -646879808 |
| -538639159 -646879808 |
| -538639159 -647070308 900 1183 |
| -538806780 -647160825 |
| -540483000 -648066000 283 -1327 |
| -540956647 -649911187 |
| -541004011 -650095705 756 593 |
| -541138715 -649961001 |
| -567699010 -676521296 |
| -567564306 -676656000 1350 1350 |
| -567564306 -676846500 |
| -525399000 -676846500 |
| -525399000 -676656000 2700 900 |
| -525208500 -676656000 |
| ANP000089 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -559498508 -585978000 |
| -556069492 -585978000 |
| ANP000090 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 67 52 381000 1 |
| -581596420 -591693000 |
| -581406000 -591698521 1783 14 |
| -581596499 -591697969 |
| -583311000 -591693000 3598 -1007 |
| -583636500 -593376326 |
| -583672667 -593563361 790 559 |
| -583807371 -593428657 |
| -586958557 -596579843 |
| -587578200 -595960200 3150 -450 |
| -587578200 -596836508 |
| -591898814 -596836508 |
| -591898814 -597027008 900 450 |
| -592033518 -596892304 |
| -605768843 -610627629 |
| -605634139 -610762333 1350 559 |
| -605821174 -610798500 |
| -607504500 -611124000 109 -2918 |
| -607179000 -609440674 |
| -607142833 -609253639 2590 559 |
| -607008129 -609388343 |
| -597432158 -599812372 |
| -597566862 -599677668 3150 1533 |
| -597626940 -599496889 |
| -597903300 -598665300 2883 -183 |
| -597903300 -599541608 |
| -600699914 -599541608 |
| -600699914 -599732108 900 450 |
| -600834618 -599597404 |
| -605768843 -604531629 |
| -605634139 -604666333 1350 559 |
| -605821174 -604702500 |
| -607504500 -605028000 109 -2918 |
| -607179000 -603344674 |
| -607142833 -603157639 2590 559 |
| -607008129 -603292343 |
| -601761443 -598045657 |
| -601141800 -598665300 1350 -450 |
| -601141800 -597788992 |
| -598345186 -597788992 |
| -598345186 -597598492 2700 450 |
| -598210482 -597733196 |
| -594156018 -593678732 |
| -594290722 -593544028 3150 1486 |
| -594335750 -593358926 |
| -594741000 -591693000 2836 -1034 |
| -596455494 -591700027 |
| -596645992 -591700808 2 21 |
| -596455652 -591693000 |
| -596645992 -591685192 3576 21 |
| -596455494 -591685973 |
| -594741000 -591693000 1797 -1795 |
| -593026499 -591688031 |
| -592836000 -591687479 1801 14 |
| -593026420 -591693000 |
| -592836000 -591698521 1783 14 |
| -593026499 -591697969 |
| -594741000 -591693000 3598 -135 |
| -593075074 -592098250 |
| -592889972 -592143278 1663 1486 |
| -592755268 -592277982 |
| -592666657 -592189371 |
| -592801361 -592054667 3150 559 |
| -592614326 -592018500 |
| -590931000 -591693000 1909 -107 |
| -592645501 -591697969 |
| -592836000 -591698521 1 14 |
| -592645580 -591693000 |
| -592836000 -591687479 3583 14 |
| -592645501 -591688031 |
| -590931000 -591693000 1798 -1796 |
| -589216499 -591688031 |
| -589026000 -591687479 1801 14 |
| -589216420 -591693000 |
| -589026000 -591698521 1783 14 |
| -589216499 -591697969 |
| -590931000 -591693000 3598 -1007 |
| -591256500 -593376326 |
| -591292667 -593563361 790 559 |
| -591427371 -593428657 |
| -592811842 -594813128 |
| -592677138 -594947832 1350 1533 |
| -592617060 -595128611 |
| -592340700 -595960200 1083 -183 |
| -592340700 -595083892 |
| -588020086 -595083892 |
| -588020086 -594893392 2700 450 |
| -587885382 -595028096 |
| -586536018 -593678732 |
| -586670722 -593544028 3150 1486 |
| -586715750 -593358926 |
| -587121000 -591693000 2836 -1035 |
| -588835501 -591697969 |
| -589026000 -591698521 1 14 |
| -588835580 -591693000 |
| -589026000 -591687479 3583 14 |
| -588835501 -591688031 |
| -587121000 -591693000 1798 -1796 |
| -585406499 -591688031 |
| -585216000 -591687479 1801 14 |
| -585406420 -591693000 |
| -585216000 -591698521 1783 14 |
| -585406499 -591697969 |
| -587121000 -591693000 3598 -135 |
| -585455074 -592098250 |
| -585269972 -592143278 1663 1486 |
| -585135268 -592277982 |
| -585046657 -592189371 |
| -585181361 -592054667 3150 559 |
| -584994326 -592018500 |
| -583311000 -591693000 1909 -107 |
| -585025501 -591697969 |
| -585216000 -591698521 1 14 |
| -585025580 -591693000 |
| -585216000 -591687479 3583 14 |
| -585025501 -591688031 |
| -583311000 -591693000 1798 -1796 |
| -581596499 -591688031 |
| -581406000 -591687479 1801 14 |
| -581596420 -591693000 |
| ANP000091 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 194 141 381000 1 |
| -573976420 -591693000 |
| -573786000 -591698521 1783 14 |
| -573976499 -591697969 |
| -575691000 -591693000 3598 -1007 |
| -576016500 -593376326 |
| -576052667 -593563361 790 559 |
| -576187371 -593428657 |
| -583339057 -600580343 |
| -583958700 -599960700 3150 -450 |
| -583958700 -600837008 |
| -590260514 -600837008 |
| -590260514 -601027508 900 450 |
| -590395218 -600892804 |
| -605873248 -616370834 |
| -605738544 -616505538 1350 670 |
| -605915139 -616576984 |
| -607504500 -617220000 220 -456 |
| -605933123 -617905793 |
| -605758526 -617981992 1564 1135 |
| -605758526 -618172492 |
| -604822186 -618172492 |
| -604822186 -617981992 2700 450 |
| -604687482 -618116696 |
| -595905157 -609334371 |
| -596039861 -609199667 3150 559 |
| -595852826 -609163500 |
| -594169500 -608838000 1909 -2918 |
| -594495000 -610521326 |
| -594531167 -610708361 790 559 |
| -594665871 -610573657 |
| -602930102 -618837888 |
| -602795398 -618972592 1350 1350 |
| -602795398 -619163092 |
| -600478786 -619163092 |
| -600478786 -618972592 2700 450 |
| -600344082 -619107296 |
| -595905157 -614668371 |
| -596039861 -614533667 3150 559 |
| -595852826 -614497500 |
| -594169500 -614172000 1909 -2918 |
| -594495000 -615855326 |
| -594531167 -616042361 790 559 |
| -594665871 -615907657 |
| -597062702 -618304488 |
| -596927998 -618439192 1350 1350 |
| -596927998 -618629692 |
| -595747783 -618629692 |
| -595747783 -618439192 2700 559 |
| -595589955 -618545872 |
| -594169500 -619506000 1459 -2918 |
| -595589955 -620466128 |
| -595747783 -620572808 340 559 |
| -595747783 -620382308 |
| -596547014 -620382308 |
| -596547014 -620572808 900 450 |
| -596681718 -620438104 |
| -597893257 -621649643 |
| -598512900 -621030000 3150 -450 |
| -598512900 -621906308 |
| -621845398 -621906308 |
| -621845398 -622096808 900 1350 |
| -621980102 -622231512 |
| -620303718 -623907896 |
| -620169014 -623773192 2250 450 |
| -620169014 -623963692 |
| -595747783 -623963692 |
| -595747783 -623773192 2700 559 |
| -595589955 -623879872 |
| -594169500 -624840000 1459 -2918 |
| -595589955 -625800128 |
| -595747783 -625906808 340 559 |
| -595747783 -625716308 |
| -619445098 -625716308 |
| -619445098 -625906808 900 1350 |
| -619579802 -626041512 |
| -613636218 -631985096 |
| -613501514 -631850392 2250 450 |
| -613501514 -632040892 |
| -612724200 -632040892 |
| -612724200 -632917200 900 -450 |
| -612104557 -632297557 |
| -596227971 -648174143 |
| -596093267 -648039439 2250 559 |
| -596057100 -648226474 |
| -595731600 -649909800 1009 -1007 |
| -594017099 -649904831 |
| -593826600 -649904279 1801 14 |
| -594017020 -649909800 |
| -593826600 -649915321 1783 14 |
| -594017099 -649914769 |
| -595731600 -649909800 3598 -46 |
| -594023197 -650054352 |
| -593833375 -650070413 1751 1398 |
| -593698671 -650205117 |
| -593686140 -650192586 |
| -593820844 -650057882 3150 494 |
| -593630920 -650043074 |
| -591921600 -649909800 1844 -42 |
| -593636101 -649914769 |
| -593826600 -649915321 1 14 |
| -593636180 -649909800 |
| -593826600 -649904279 3583 14 |
| -593636101 -649904831 |
| -591921600 -649909800 1798 -1392 |
| -590618689 -648795367 |
| -590473922 -648671542 2205 494 |
| -590473922 -648862042 |
| -588586404 -648862042 |
| -588586404 -648671542 2700 450 |
| -588451700 -648806246 |
| -585385377 -645739923 |
| -584644500 -646480800 1350 -450 |
| -584644500 -645433042 |
| -582244078 -645433042 |
| -582244078 -645242542 2700 494 |
| -582099311 -645366367 |
| -580796400 -646480800 1394 -2789 |
| -582099311 -647595233 |
| -582244078 -647719058 405 494 |
| -582244078 -647528558 |
| -584131596 -647528558 |
| -584131596 -647719058 900 450 |
| -584266300 -647584354 |
| -587332623 -650650677 |
| -588073500 -649909800 3150 -450 |
| -588073500 -650957558 |
| -590473922 -650957558 |
| -590473922 -651148058 900 494 |
| -590618689 -651024233 |
| -591921600 -649909800 3194 -539 |
| -592054874 -651619120 |
| -592069682 -651809044 855 494 |
| -592204386 -651674340 |
| -593180973 -652650927 |
| -593921850 -651910050 3150 -450 |
| -593921850 -652957808 |
| -620396516 -652957808 |
| -620396516 -651910050 2700 -450 |
| -621137393 -652650927 |
| -622508266 -651280054 |
| -622642970 -651414758 450 450 |
| -622642970 -651224258 |
| -623506622 -651224258 |
| -623506622 -651414758 900 494 |
| -623651389 -651290933 |
| -624954300 -650176500 3194 -539 |
| -625087574 -651885820 |
| -625102382 -652075744 855 494 |
| -625237086 -651941040 |
| -626213673 -652917627 |
| -626954550 -652176750 3150 -450 |
| -626954550 -653224508 |
| -658067250 -653224508 |
| -658067250 -652176750 2700 -450 |
| -658808127 -652917627 |
| -661723496 -650002258 |
| -661858200 -650136962 450 537 |
| -661887273 -649948693 |
| -662178000 -648066000 2787 -1271 |
| -663854220 -647160825 |
| -664021841 -647070308 3316 1183 |
| -664021841 -646879808 |
| -664409372 -646879808 |
| -664409372 -647070308 900 593 |
| -664573338 -646973326 |
| -666213000 -646003500 3293 -2292 |
| -666549790 -644128499 |
| -666583469 -643941000 2801 1596 |
| -666549790 -643753501 |
| -666213000 -641878500 2598 -1596 |
| -666549790 -640003499 |
| -666583469 -639816000 2801 1596 |
| -666549790 -639628501 |
| -666213000 -637753500 2598 -1596 |
| -666549790 -635878499 |
| -666583469 -635691000 2801 1596 |
| -666549790 -635503501 |
| -666213000 -633628500 2598 -1596 |
| -666549790 -631753499 |
| -666583469 -631566000 2801 1596 |
| -666549790 -631378501 |
| -666213000 -629503500 2598 -1596 |
| -666549790 -627628499 |
| -666583469 -627441000 2801 1596 |
| -666549790 -627253501 |
| -666213000 -625378500 2598 -1596 |
| -666549790 -623503499 |
| -666583469 -623316000 2801 1596 |
| -666549790 -623128501 |
| -666213000 -621253500 2598 -1596 |
| -666549790 -619378499 |
| -666583469 -619191000 2801 1596 |
| -666549790 -619003501 |
| -666213000 -617128500 2598 -1596 |
| -666549790 -615253499 |
| -666583469 -615066000 2801 1596 |
| -666549790 -614878501 |
| -666213000 -613003500 2598 -1596 |
| -666549790 -611128499 |
| -666583469 -610941000 2801 1596 |
| -666549790 -610753501 |
| -666213000 -608878500 2598 -1596 |
| -666549790 -607003499 |
| -666583469 -606816000 2801 1596 |
| -666549790 -606628501 |
| -666213000 -604753500 2598 -1596 |
| -666549790 -602878499 |
| -666583469 -602691000 2801 1596 |
| -666549790 -602503501 |
| -666213000 -600628500 2598 -3396 |
| -665876210 -602503501 |
| -665842531 -602691000 1001 1596 |
| -665876210 -602878499 |
| -666213000 -604753500 798 -492 |
| -664573338 -603783674 |
| -664409372 -603686692 2106 593 |
| -664409372 -603877192 |
| -664021841 -603877192 |
| -664021841 -603686692 2700 1183 |
| -663854220 -603596175 |
| -662178000 -602691000 2083 -1081 |
| -662514790 -600815999 |
| -662548469 -600628500 2801 1596 |
| -662514790 -600441001 |
| -662178000 -598566000 2598 -3396 |
| -661841210 -600441001 |
| -661807531 -600628500 1001 1596 |
| -661841210 -600815999 |
| -662178000 -602691000 798 -492 |
| -660538338 -601721174 |
| -660374372 -601624192 2106 593 |
| -660374372 -601814692 |
| -643747486 -601814692 |
| -643747486 -601624192 2700 450 |
| -643612782 -601758896 |
| -640166243 -598312357 |
| -639546600 -598932000 1350 -450 |
| -639546600 -598055692 |
| -622417783 -598055692 |
| -622417783 -597865192 2700 559 |
| -622259955 -597971872 |
| -620839500 -598932000 1459 -2918 |
| -622259955 -599892128 |
| -622417783 -599998808 340 559 |
| -622417783 -599808308 |
| -639104714 -599808308 |
| -639104714 -599998808 900 450 |
| -639239418 -599864104 |
| -642685957 -603310643 |
| -643305600 -602691000 3150 -239 |
| -642991005 -603508891 |
| -642922616 -603686692 1110 1589 |
| -642922616 -603877192 |
| -642069000 -603877192 |
| -642069000 -604753500 900 -420 |
| -641482193 -604102675 |
| -641354628 -603961192 2279 420 |
| -641354628 -604151692 |
| -622417783 -604151692 |
| -622417783 -603961192 2700 559 |
| -622259955 -604067872 |
| -620839500 -605028000 1459 -2918 |
| -622259955 -605988128 |
| -622417783 -606094808 340 559 |
| -622417783 -605904308 |
| -627560398 -605904308 |
| -627560398 -606094808 900 1350 |
| -627695102 -606229512 |
| -623732718 -610191896 |
| -623598014 -610057192 2250 450 |
| -623598014 -610247692 |
| -622417783 -610247692 |
| -622417783 -610057192 2700 559 |
| -622259955 -610163872 |
| -620839500 -611124000 1459 -2918 |
| -622259955 -612084128 |
| -622417783 -612190808 340 559 |
| -622417783 -612000308 |
| -624039900 -612000308 |
| -624039900 -611124000 2700 -218 |
| -624365622 -611937524 |
| -624436431 -612114375 681 1568 |
| -624571135 -612249079 |
| -621335871 -615484343 |
| -621201167 -615349639 2250 559 |
| -621165000 -615536674 |
| -620839500 -617220000 1009 -1245 |
| -619268123 -617905793 |
| -619093526 -617981992 1564 1135 |
| -619093526 -618172492 |
| -609250474 -618172492 |
| -609250474 -617981992 2700 1135 |
| -609075877 -617905793 |
| -607504500 -617220000 2035 -1117 |
| -607560203 -615506397 |
| -607566392 -615315998 2718 431 |
| -607431688 -615450702 |
| -591322043 -599341057 |
| -590702400 -599960700 1350 -450 |
| -590702400 -599084392 |
| -584400586 -599084392 |
| -584400586 -598893892 2700 450 |
| -584265882 -599028596 |
| -578916018 -593678732 |
| -579050722 -593544028 3150 1486 |
| -579095750 -593358926 |
| -579501000 -591693000 2836 -1035 |
| -581215501 -591697969 |
| -581406000 -591698521 1 14 |
| -581215580 -591693000 |
| -581406000 -591687479 3583 14 |
| -581215501 -591688031 |
| -579501000 -591693000 1798 -1796 |
| -577786499 -591688031 |
| -577596000 -591687479 1801 14 |
| -577786420 -591693000 |
| -577596000 -591698521 1783 14 |
| -577786499 -591697969 |
| -579501000 -591693000 3598 -135 |
| -577835074 -592098250 |
| -577649972 -592143278 1663 1486 |
| -577515268 -592277982 |
| -577426657 -592189371 |
| -577561361 -592054667 3150 559 |
| -577374326 -592018500 |
| -575691000 -591693000 1909 -107 |
| -577405501 -591697969 |
| -577596000 -591698521 1 14 |
| -577405580 -591693000 |
| -577596000 -591687479 3583 14 |
| -577405501 -591688031 |
| -575691000 -591693000 1798 -1796 |
| -573976499 -591688031 |
| -573786000 -591687479 1801 14 |
| -573976420 -591693000 |
| ANP000092 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -573595501 -591688031 |
| -571881000 -591693000 1798 -3596 |
| -573595501 -591697969 |
| -573786000 -591698521 1 14 |
| -573595580 -591693000 |
| -573786000 -591687479 3583 14 |
| -573595501 -591688031 |
| ANP000093 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 36 23 381000 1 |
| -562127392 -599846400 |
| -562127392 -602132400 |
| -562698900 -602132400 0 -900 |
| -562698900 -602703908 |
| -563834092 -602703908 |
| -563834092 -602894408 900 23 |
| -563841900 -602704068 |
| -563849708 -602894408 876 23 |
| -563849708 -602703908 |
| -564238214 -602703908 |
| -564238214 -602894408 900 450 |
| -564372918 -602759704 |
| -564426882 -602813668 |
| -564292178 -602948372 1350 1486 |
| -564247150 -603133474 |
| -563841900 -604799400 1036 -134 |
| -563848927 -603084906 |
| -563849708 -602894408 2702 21 |
| -563841900 -603084748 |
| -563834092 -602894408 2676 21 |
| -563834873 -603084906 |
| -563841900 -604799400 897 -1795 |
| -563836931 -606513901 |
| -563836379 -606704400 901 14 |
| -563841900 -606513980 |
| -563847421 -606704400 883 14 |
| -563846869 -606513901 |
| -563841900 -604799400 2698 -1035 |
| -565507826 -604394150 |
| -565692928 -604349122 3463 1486 |
| -565827632 -604214418 |
| -567298957 -605685743 |
| -567918600 -605066100 3150 -450 |
| -567918600 -605942408 |
| -576620714 -605942408 |
| -576620714 -606132908 900 450 |
| -576755418 -605998204 |
| -579098843 -608341629 |
| -578964139 -608476333 1350 559 |
| -579151174 -608512500 |
| -580834500 -608838000 109 -2918 |
| -580509000 -607154674 |
| -580472833 -606967639 2590 559 |
| -580338129 -607102343 |
| -577682243 -604446457 |
| -577062600 -605066100 1350 -450 |
| -577062600 -604189792 |
| -568360486 -604189792 |
| -568360486 -603999292 2700 450 |
| -568225782 -604133996 |
| -565612204 -601520418 |
| -565746908 -601385714 3150 450 |
| -565556408 -601385714 |
| -565556408 -599846400 |
| -564984900 -599846400 1800 -900 |
| -564984900 -599274892 |
| -562698900 -599274892 |
| -562698900 -599846400 900 -900 |
| -562127392 -599846400 |
| ANP000094 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -606894899 |
| -563841900 -608609400 898 -1796 |
| -563836931 -610323901 |
| -563836379 -610514400 901 14 |
| -563841900 -610323980 |
| -563847421 -610514400 883 14 |
| -563846869 -610323901 |
| -563841900 -608609400 2698 -557 |
| -565262355 -609569528 |
| -565420183 -609676208 340 559 |
| -565420183 -609485708 |
| -566829014 -609485708 |
| -566829014 -609676208 900 450 |
| -566963718 -609541504 |
| -572213857 -614791643 |
| -572833500 -614172000 3150 -450 |
| -572833500 -615048308 |
| -579256217 -615048308 |
| -579256217 -615238808 900 559 |
| -579414045 -615132128 |
| -580834500 -614172000 3259 -2918 |
| -579414045 -613211872 |
| -579256217 -613105192 2140 559 |
| -579256217 -613295692 |
| -573275386 -613295692 |
| -573275386 -613105192 2700 450 |
| -573140682 -613239896 |
| -567890543 -607989757 |
| -567270900 -608609400 1350 -450 |
| -567270900 -607733092 |
| -565420183 -607733092 |
| -565420183 -607542592 2700 559 |
| -565262355 -607649272 |
| -563841900 -608609400 1459 -557 |
| -563846869 -606894899 |
| -563847421 -606704400 2701 14 |
| -563841900 -606894820 |
| -563836379 -606704400 2683 14 |
| -563836931 -606894899 |
| ANP000095 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -610704899 |
| -563841900 -612419400 898 -1796 |
| -563836931 -614133901 |
| -563836379 -614324400 901 14 |
| -563841900 -614133980 |
| -563847421 -614324400 883 14 |
| -563846869 -614133901 |
| -563841900 -612419400 2698 -1796 |
| -563846869 -610704899 |
| -563847421 -610514400 2701 14 |
| -563841900 -610704820 |
| -563836379 -610514400 2683 14 |
| -563836931 -610704899 |
| ANP000096 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -614514899 |
| -563841900 -616229400 898 -1796 |
| -563836931 -617943901 |
| -563836379 -618134400 901 14 |
| -563841900 -617943980 |
| -563847421 -618134400 883 14 |
| -563846869 -617943901 |
| -563841900 -616229400 2698 -557 |
| -565262355 -617189528 |
| -565420183 -617296208 340 559 |
| -565420183 -617105708 |
| -569115014 -617105708 |
| -569115014 -617296208 900 450 |
| -569249718 -617161504 |
| -572213857 -620125643 |
| -572833500 -619506000 3150 -450 |
| -572833500 -620382308 |
| -579256217 -620382308 |
| -579256217 -620572808 900 559 |
| -579414045 -620466128 |
| -580834500 -619506000 3259 -2918 |
| -579414045 -618545872 |
| -579256217 -618439192 2140 559 |
| -579256217 -618629692 |
| -573275386 -618629692 |
| -573275386 -618439192 2700 450 |
| -573140682 -618573896 |
| -570176543 -615609757 |
| -569556900 -616229400 1350 -450 |
| -569556900 -615353092 |
| -565420183 -615353092 |
| -565420183 -615162592 2700 559 |
| -565262355 -615269272 |
| -563841900 -616229400 1459 -557 |
| -563846869 -614514899 |
| -563847421 -614324400 2701 14 |
| -563841900 -614514820 |
| -563836379 -614324400 2683 14 |
| -563836931 -614514899 |
| ANP000097 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 7 6 381000 1 |
| -563836931 -618324899 |
| -563841900 -620039400 898 -1796 |
| -563836931 -621753901 |
| -563836379 -621944400 901 14 |
| -563841900 -621753980 |
| -563847421 -621944400 883 14 |
| -563846869 -621753901 |
| -563841900 -620039400 2698 -1796 |
| -563846869 -618324899 |
| -563847421 -618134400 2701 14 |
| -563841900 -618324820 |
| -563836379 -618134400 2683 14 |
| -563836931 -618324899 |
| ANP000098 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 23 16 381000 1 |
| -563836931 -622134899 |
| -563841900 -623849400 898 -1796 |
| -563836931 -625563901 |
| -563836379 -625754400 901 14 |
| -563841900 -625563980 |
| -563847421 -625754400 883 14 |
| -563846869 -625563901 |
| -563841900 -623849400 2698 -557 |
| -565262355 -624809528 |
| -565420183 -624916208 340 559 |
| -565420183 -624725708 |
| -571401014 -624725708 |
| -571401014 -624916208 900 450 |
| -571535718 -624781504 |
| -572213857 -625459643 |
| -572833500 -624840000 3150 -450 |
| -572833500 -625716308 |
| -579256217 -625716308 |
| -579256217 -625906808 900 559 |
| -579414045 -625800128 |
| -580834500 -624840000 3259 -2918 |
| -579414045 -623879872 |
| -579256217 -623773192 2140 559 |
| -579256217 -623963692 |
| -573275386 -623963692 |
| -573275386 -623773192 2700 450 |
| -573140682 -623907896 |
| -572462543 -623229757 |
| -571842900 -623849400 1350 -450 |
| -571842900 -622973092 |
| -565420183 -622973092 |
| -565420183 -622782592 2700 559 |
| -565262355 -622889272 |
| -563841900 -623849400 1459 -557 |
| -563846869 -622134899 |
| -563847421 -621944400 2701 14 |
| -563841900 -622134820 |
| -563836379 -621944400 2683 14 |
| -563836931 -622134899 |
| ANP000099 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -658341000 |
| -660139642 -658341000 |
| ANP000100 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -669036000 |
| -663964492 -669036000 |
| ANP000101 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -563836931 -625944899 |
| -563841900 -627659400 898 -3596 |
| -563846869 -625944899 |
| -563847421 -625754400 2701 14 |
| -563841900 -625944820 |
| -563836379 -625754400 2683 14 |
| -563836931 -625944899 |
| ANP000102 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 20 11 381000 1 |
| -596836332 -591693000 |
| -596645992 -591700808 1776 23 |
| -596836492 -591700808 |
| -596836492 -592836000 |
| -597408000 -592836000 0 -900 |
| -597408000 -593407508 |
| -598947314 -593407508 |
| -598947314 -593598008 900 450 |
| -599082018 -593463304 |
| -605170357 -599551643 |
| -605790000 -598932000 3150 -450 |
| -605790000 -599808308 |
| -605926217 -599808308 |
| -605926217 -599998808 900 559 |
| -606084045 -599892128 |
| -607504500 -598932000 3259 -2853 |
| -606203089 -597815815 |
| -606058489 -597691795 2206 943 |
| -605923785 -597826499 |
| -600321304 -592224018 |
| -600456008 -592089314 3150 450 |
| -600265508 -592089314 |
| -600265508 -590550000 |
| -599694000 -590550000 1800 -900 |
| -599694000 -589978492 |
| -597408000 -589978492 |
| -597408000 -590550000 900 -900 |
| -596836492 -590550000 |
| -596836492 -591685192 |
| -596645992 -591685192 1800 23 |
| -596836332 -591693000 |
| ANP000103 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -674107508 -577596000 |
| -663964492 -577596000 |
| ANP000104 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -668026358 -588291000 |
| -660139642 -588291000 |
| ANP000105 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -654502358 -582168000 |
| -646615642 -582168000 |
| ANP000106 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -577596000 |
| -528328492 -577596000 |
| ANP000107 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| POLY 4 3 381000 1 |
| -552406931 -625944899 |
| -552411900 -627659400 898 -3596 |
| -552416869 -625944899 |
| -552417421 -625754400 2701 14 |
| -552411900 -625944820 |
| -552406379 -625754400 2683 14 |
| -552406931 -625944899 |
| ANP000108 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -542296358 -658341000 |
| -534409642 -658341000 |
| ANP000109 VOIDOUT 685800000 685800000 1 128 ANP000088 |
| CIRCLE 2 0 381000 1 |
| -538471508 -669036000 |
| -528328492 -669036000 |
| HP27860889 POUROUT 25527000 115824000 1 0 |
| POLY 3 0 381000 1 |
| 0 0 |
| 0 762000 |
| 0 0 |
| *TESTPOINT* |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| DFT_CONFIGURATION PARENT |
| { |
| UNITS MILS |
| PROBING_STRATEGY PARENT |
| { |
| PROBE_TOP_SIDE NO |
| PROBE_VIAS YES |
| PROBE_NO_CONNECT NO |
| } |
| DFT_RULES PARENT |
| { |
| PROBE 100 |
| { |
| DRILL_SIZE 69 |
| ENABLE YES |
| } |
| PROBE 75 |
| { |
| DRILL_SIZE 43 |
| ENABLE NO |
| } |
| PROBE 50 |
| { |
| DRILL_SIZE 30 |
| ENABLE NO |
| } |
| MIN_VIA_SIZE 25 |
| MIN_PAD_SIZE 25 |
| PIN_TO_PIN 14 |
| PIN_TO_BOARD 125 |
| PIN_TO_COMPONENT 0 |
| } |
| DIF_FILE PARENT |
| { |
| VIA_PREFIX VIA |
| TP_PART_TYPE TP100 |
| TP_PART_TYPE TP150 |
| TP_PREFIX TP |
| TP_PREFIX PN_TP |
| TP_PREFIX TP_SMD |
| TH_PART_TYPE MTHOLE1 |
| TH_PART_TYPE MTHOLE2 |
| TH_PREFIX TH |
| TH_PREFIX MH |
| NC_NET N.C. |
| INCLUDE_TP YES |
| } |
| RETURN_OPTIONS PARENT |
| { |
| AUTO_RETURN YES |
| ADD_TP_VIAS_ON_RETURN NO |
| ADD_MULTIPLE_FOR_POWERNET NO |
| TP_VIA_TYPE STANDARDVIA |
| PPCB_NOT_CONNECTED_NET_NAME NOT_CONNECTED |
| } |
| } |
| LAYER DATA |
| { |
| LAYER 0 |
| { |
| LAYER_THICKNESS 0 |
| DIELECTRIC 3.300000 |
| } |
| LAYER 1 |
| { |
| LAYER_NAME Top |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION HORIZONTAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Top |
| ASSOCIATED_PASTE_MASK Paste Mask Top |
| ASSOCIATED_SOLDER_MASK Solder Mask Top |
| ASSOCIATED_ASSEMBLY Assembly Drawing Top |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 3 |
| VIA 3 |
| PAD 3 |
| COPPER 3 |
| 2DLINE 3 |
| TEXT 3 |
| ERROR 5 |
| TOPCOMPONENT 1 |
| BOTTOMCOMPONENT 0 |
| REFDES 1 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 381000 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 4.300000 |
| COST 0 |
| } |
| LAYER 2 |
| { |
| LAYER_NAME Bottom |
| LAYER_TYPE ROUTING |
| PLANE NONE |
| ROUTING_DIRECTION VERTICAL |
| ASSOCIATED_SILK_SCREEN Silkscreen Bottom |
| ASSOCIATED_PASTE_MASK Paste Mask Bottom |
| ASSOCIATED_SOLDER_MASK Solder Mask Bottom |
| ASSOCIATED_ASSEMBLY Assembly Drawing Bottom |
| COMPONENT Y |
| ROUTABLE Y |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 11 |
| VIA 11 |
| PAD 11 |
| COPPER 11 |
| 2DLINE 11 |
| TEXT 11 |
| ERROR 13 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 14 |
| REFDES 14 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 51435 |
| DIELECTRIC 3.300000 |
| COST 0 |
| } |
| LAYER 3 |
| { |
| LAYER_NAME Layer_3 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 4 |
| { |
| LAYER_NAME Layer_4 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 5 |
| { |
| LAYER_NAME Layer_5 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 6 |
| { |
| LAYER_NAME Layer_6 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 7 |
| { |
| LAYER_NAME Layer_7 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 8 |
| { |
| LAYER_NAME Layer_8 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 9 |
| { |
| LAYER_NAME Layer_9 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 10 |
| { |
| LAYER_NAME Layer_10 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 11 |
| { |
| LAYER_NAME Layer_11 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 12 |
| { |
| LAYER_NAME Layer_12 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 13 |
| { |
| LAYER_NAME Layer_13 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 14 |
| { |
| LAYER_NAME Layer_14 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 15 |
| { |
| LAYER_NAME Layer_15 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 16 |
| { |
| LAYER_NAME Layer_16 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 17 |
| { |
| LAYER_NAME Layer_17 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 18 |
| { |
| LAYER_NAME Layer_18 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 19 |
| { |
| LAYER_NAME Layer_19 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 20 |
| { |
| LAYER_NAME Layer_20 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 21 |
| { |
| LAYER_NAME Solder Mask Top |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 22 |
| { |
| LAYER_NAME Paste Mask Bottom |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 23 |
| { |
| LAYER_NAME Paste Mask Top |
| LAYER_TYPE PASTE_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 24 |
| { |
| LAYER_NAME Drill Drawing |
| LAYER_TYPE DRILL |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 5 |
| TEXT 5 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 25 |
| { |
| LAYER_NAME Layer_25 |
| LAYER_TYPE UNASSIGNED |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 26 |
| { |
| LAYER_NAME Silkscreen Top |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 27 |
| { |
| LAYER_NAME Assembly Drawing Top |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 28 |
| { |
| LAYER_NAME Solder Mask Bottom |
| LAYER_TYPE SOLDER_MASK |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 29 |
| { |
| LAYER_NAME Silkscreen Bottom |
| LAYER_TYPE SILK_SCREEN |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| LAYER 30 |
| { |
| LAYER_NAME Assembly Drawing Bottom |
| LAYER_TYPE ASSEMBLY |
| PLANE NONE |
| ROUTING_DIRECTION NO_PREFERENCE |
| VISIBLE Y |
| SELECTABLE Y |
| ENABLED Y |
| COLORS : |
| { |
| ROUTE 0 |
| VIA 0 |
| PAD 0 |
| COPPER 0 |
| 2DLINE 0 |
| TEXT 0 |
| ERROR 0 |
| TOPCOMPONENT 0 |
| BOTTOMCOMPONENT 0 |
| REFDES 0 |
| PARTTYPE 0 |
| ATTRIBUTE 0 |
| KEEPOUT 0 |
| } |
| LAYER_THICKNESS 0 |
| COPPER_THICKNESS 0 |
| DIELECTRIC 0.000000 |
| COST 0 |
| } |
| } |
| SELECTABILITY DATA |
| { |
| PARTS Y |
| PINS Y |
| TRACES Y |
| VIAS Y |
| TACKS Y |
| UNROUTED Y |
| EDGES Y |
| NODES Y |
| SHAPES Y |
| DIMENSIONS Y |
| TEXT Y |
| AREA_PARTS Y |
| AREA_PINS Y |
| AREA_TRACES Y |
| AREA_VIAS Y |
| AREA_TACKS Y |
| AREA_UNROUTED Y |
| AREA_EDGES Y |
| AREA_NODES Y |
| AREA_SHAPES Y |
| AREA_DIMENSIONS Y |
| AREA_TEXT Y |
| } |
| VISIBILITY DATA |
| { |
| PADS Y |
| TRACKS Y |
| VIAS Y |
| COPPER Y |
| LINES Y |
| TEXT Y |
| ERRORS Y |
| CLUSTER Y |
| TOP_COMPONENT Y |
| BOTTOM_COMPONENT Y |
| PLANE_THERMAL Y |
| REFDES Y |
| PARTTYPES Y |
| ATTRIBUTES Y |
| KEEPOUTS Y |
| SELECTION_COLOR 15 |
| HIGHLIGHT_COLOR 14 |
| FIXED_COLOR 3 |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION PARENT |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 609600 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| NET GND |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 381000 |
| VIA_TO_TRACK 381000 |
| VIA_TO_VIA 381000 |
| PAD_TO_TRACK 381000 |
| PAD_TO_VIA 381000 |
| PAD_TO_PAD 381000 |
| SMD_TO_TRACK 381000 |
| SMD_TO_VIA 381000 |
| SMD_TO_PAD 381000 |
| SMD_TO_SMD 381000 |
| COPPER_TO_TRACK 381000 |
| COPPER_TO_VIA 381000 |
| COPPER_TO_PAD 381000 |
| COPPER_TO_SMD 381000 |
| TEXT_TO_TRACK 381000 |
| TEXT_TO_VIA 381000 |
| TEXT_TO_PAD 381000 |
| TEXT_TO_SMD 381000 |
| OUTLINE_TO_TRACK 381000 |
| OUTLINE_TO_VIA 381000 |
| OUTLINE_TO_PAD 381000 |
| OUTLINE_TO_SMD 381000 |
| DRILL_TO_TRACK 381000 |
| DRILL_TO_VIA 381000 |
| DRILL_TO_PAD 381000 |
| DRILL_TO_SMD 381000 |
| DRILL_TO_COPPER 381000 |
| SAME_NET_SMD_TO_VIA 228600 |
| SAME_NET_SMD_TO_CRN 228600 |
| SAME_NET_VIA_TO_VIA 228600 |
| SAME_NET_PAD_TO_CRN 228600 |
| MIN_TRACK_WIDTH 457200 |
| REC_TRACK_WIDTH 952500 |
| MAX_TRACK_WIDTH 952500 |
| DRILL_TO_DRILL 228600 |
| BODY_TO_BODY 228600 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 1904999936 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 38100000 |
| PARALLEL_GAP 7620000 |
| TANDEM_LENGTH 38100000 |
| TANDEM_GAP 7620000 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 7620000 |
| MATCH_LENGTH_TOLERANCE 7620000 |
| } |
| } |
| RULE_SET (4) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 1 |
| VALID_LAYER 2 |
| VALID_VIA_TYPE STANDARDVIA |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| CAM_SECTION PARENT |
| { |
| CAM_VERSION V4.0 |
| CAM_DOC_LIST PARENT |
| { |
| CAM_DOC_NAME (art001.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art001.pho |
| DOC_LAYER_NAMES Top |
| DOC_LAYER_NUMBERS 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 1 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (art002.pho) |
| { |
| DOC_PLOT_TYPE Routing |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE art002.pho |
| DOC_LAYER_NAMES Bottom |
| DOC_LAYER_NUMBERS 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component |
| DOC_FABRICATION_LAYER_NUMBER 2 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None None |
| DOC_ROUTES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (sm001021.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm001021.pho |
| DOC_LAYER_NAMES Top Solder_Mask_Top |
| DOC_LAYER_NUMBERS 1 21 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 21 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (smd002022.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd002022.pho |
| DOC_LAYER_NAMES Bottom Paste_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 22 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 22 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (smd001023.pho) |
| { |
| DOC_PLOT_TYPE Paste_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE smd001023.pho |
| DOC_LAYER_NAMES Top Paste_Mask_Top |
| DOC_LAYER_NUMBERS 1 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Drill |
| DOC_FABRICATION_LAYER_NUMBER 23 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sst001026.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sst001026.pho |
| DOC_LAYER_NAMES Top Silkscreen_Top |
| DOC_LAYER_NUMBERS 1 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 26 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES Black None |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS Y |
| } |
| CAM_DOC_NAME (sm002028.pho) |
| { |
| DOC_PLOT_TYPE Solder_Mask |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE sm002028.pho |
| DOC_LAYER_NAMES Bottom Solder_Mask_Bottom |
| DOC_LAYER_NUMBERS 2 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component SilkScreen |
| DOC_FABRICATION_LAYER_NUMBER 28 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None None |
| DOC_SLOTS None None |
| DOC_REFDES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TESTPOINTS Black Black Black Black Black Black Black Black Black Black |
| DOC_OUTLINE_LAYERS N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N |
| DOC_PADS Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_COPPER Black Black Black Black Black Black Black Black Black |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 381000 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| CAM_DOC_NAME (ssb002029.pho) |
| { |
| DOC_PLOT_TYPE Silkscreen |
| DOC_DEVICE_TYPE Photo |
| DOC_OUTPUT_FILE ssb002029.pho |
| DOC_LAYER_NAMES Bottom Silkscreen_Bottom |
| DOC_LAYER_NUMBERS 2 29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_LAYER_TYPES Component Plane |
| DOC_FABRICATION_LAYER_NUMBER 29 |
| DOC_SCALE 1 1 |
| DOC_ORIENTATION 0 |
| DOC_MIRROR N |
| DOC_JUSTIFICATION OO |
| DOC_OFFSET 38100000 38100000 |
| DOC_CLIP 0 |
| DOC_FIT_OUTPUT 0 |
| DOC_NO_PLANE_THERMALS 0 |
| DOC_ASSEMBLY_OPTION "" |
| DOC_CUSTOM_THERMALS 0 |
| DOC_BOARD None |
| DOC_CONNECTIONS None |
| DOC_OUTLINES None Black |
| DOC_SLOTS None None |
| DOC_REFDES Black None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_REFDES None None None None None |
| DOC_PARTTYPES Black None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PARTTYPES None None None None None None |
| DOC_ATTRIBUTES None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ATTRIBUTES None None None None None None |
| DOC_TESTPOINTS None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_TESTPOINTS None None None None None None |
| DOC_OUTLINE_LAYERS N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y |
| DOC_PADS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_PADS None None None None |
| DOC_VIAS None None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_VIAS None None None None |
| DOC_ROUTES None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_ROUTES None None None None None |
| DOC_COPPER None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_COPPER None None None None None |
| DOC_LINES None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_LINES Black Black Black Black Black Black Black Black Black |
| DOC_TEXT None Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black Black |
| DOC_TEXT Black Black Black Black Black Black Black Black Black |
| DOC_KEEPOUTS None None None None None None None None None None None None None None None None None None None None None None None None None |
| DOC_KEEPOUTS None None None None None |
| DOC_PINS_ADV 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 |
| DOC_PAD_OVERSIZE 0 |
| DOC_PLOT_JOBNAME Y |
| DOC_PLOT_OLE N |
| DOC_MIRROR_REFS N |
| DOC_SUPRESS_PREFIXES "" |
| DOC_PLOT_QUALITY Filled |
| DOC_DRILL_CHART Y |
| DOC_CHART_OFFSET 0 0 |
| DOC_SUPRESS_EXCLUDE_PADS N |
| } |
| } |
| CAM_AUGMENT_ON_THE_FLY Y |
| CAM_DRILL_SYMBOL_TABLE PARENT |
| { |
| MARKER_SIZE 0 |
| MARKER_LINE_WIDTH 381000 |
| MARKER_CHAR_HEIGHT 0 |
| CHART_TEXT_HEIGHT 0 |
| CHART_LINE_WIDTH 0 |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE Value |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Tolerance |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Part Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Description |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Cost |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #2 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE ASSEMBLY_OPTIONS |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| INHERITANCE PART |
| INHERITANCE JUMPER |
| ECO_REGISTRATION Y |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE PowerGround |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Voltage |
| { |
| TYPE QUANTITY |
| QUANTITY Voltage |
| ABBR V |
| UNIT Volt |
| MIN -100kV |
| MAX 100kV |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Geometry.Height |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 952500000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Diameter |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Probe to Trace Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Probe to Pad Clearance |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Generate Test Points |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Allow Stubs |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Stub Length |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Use Via Grid |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid X-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DFT.Grid Y-Coordinate |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE HyperLynx.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Sim Direction |
| { |
| TYPE LIST N |
| { |
| SIM_BOTH |
| SIM_IN |
| SIM_OUT |
| } |
| INHERITANCE PIN |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Frequency |
| { |
| TYPE QUANTITY |
| QUANTITY Frequency |
| ABBR Hz |
| UNIT Hertz |
| MIN 0Hz |
| MAX 1000GHz |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Duty Cycle |
| { |
| TYPE QUANTITY |
| QUANTITY |
| ABBR % |
| UNIT percent |
| MIN 0% |
| MAX 100% |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Signal Type |
| { |
| TYPE LIST N |
| { |
| Address |
| Analog High Speed |
| Analog Low Speed |
| Clock |
| Data |
| Do Not Analyze |
| Power Supply |
| Strobe |
| } |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model Pin |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Strategy.Fanout.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Priority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.MLGPriority |
| { |
| TYPE INTEGER |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.FormatId |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipWidth |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipHeight |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MinLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WToWDistance |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WBtoPad |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxAngle |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WB1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuideCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuide1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPAssignment1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Marker_Shape |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_NumberPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_AngularPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Suffix |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Line_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Preview_Type |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 5 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 38100000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 9525000dbunit |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Use |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.X |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Y |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 76200000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Amplitude.Min |
| { |
| TYPE INTEGER |
| MIN 3 |
| MAX 30 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Gap.Min |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 10 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MaxChannelWidth |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0dbunit |
| MAX 381000000dbunit |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.SoftLengthRrules |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MeanderBeforeTune |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE MatchLength.Name |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Planning.Scheduled |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| DECAL ELYTA |
| { |
| Description elektrolyt SMD velikost A |
| Geometry.Height 1.8 mm |
| } |
| DECAL ELYTB |
| { |
| Description elektrolyt SMD velikost B |
| Geometry.Height 2 mm |
| } |
| DECAL ELYTC |
| { |
| Description elektrolyt SMD velikost C |
| Geometry.Height 2.8 mm |
| } |
| DECAL ELYTD |
| { |
| Description elektrolyt SMD velikost D |
| Geometry.Height 3 mm |
| } |
| DECAL CE020X5 |
| { |
| Description Elyt prumer 5mm, roztec 2.032mm - 80 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE025X6 |
| { |
| Description Elyt prumer 6.3mm, roztec 2.54mm - 100 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE035X8 |
| { |
| Description Elyt prumer 8 mm, roztec3.505 mm - 138 mils |
| Geometry.Height 12 mm |
| } |
| DECAL CE050X10 |
| { |
| Description Elyt prumer 10mm, roztec 5.08mm - 200 mils |
| Geometry.Height 17 mm |
| } |
| DECAL CE050X13 |
| { |
| Description Elyt prumer 13mm, roztec 5.08mm - 200 mils |
| Geometry.Height 27 mm |
| } |
| DECAL CE075X16 |
| { |
| Description Elyt prumer 16mm, roztec 7.5mm - 300 mils |
| Geometry.Height 26 mm |
| } |
| DECAL CE075X18 |
| { |
| Description Elyt prumer 18mm, roztec 7.5mm - 300 mils |
| Geometry.Height 43 mm |
| } |
| DECAL CE020X5/L |
| { |
| Description Elyt prumer 5mm na lezato, roztec 2.032mm - 80 mils |
| Geometry.Height 5.5 mm |
| } |
| DECAL CE025X6/L |
| { |
| Description Elyt prumer 6.3mm na lezato, roztec 2.54mm - 100 mils |
| Geometry.Height 6.5 mm |
| } |
| DECAL CE035X8/L |
| { |
| Description Elyt prumer 8 mm na lezato, roztec3.505 mm - 138 mils |
| Geometry.Height 8.5 mm |
| } |
| DECAL CE050X10/L |
| { |
| Description Elyt prumer 10mm na lezato, roztec 5.08mm - 200 mils |
| Geometry.Height 10.5 mm |
| } |
| DECAL CANNON25M |
| { |
| Description konektor Cannon 25 pinu, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25M/T |
| { |
| Description konektor Cannon 25 pinu na plocho, samec |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F |
| { |
| Description konektor Cannon 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90 |
| { |
| Description konektor Cannon 9 pinu uhlovy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F_90/L |
| { |
| Description konektor Cannon 9 pinu uhlovy dlouhy, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON9F/T |
| { |
| Description konektor Cannon na plocho 9 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F |
| { |
| Description konektor Cannon 25 pinu, samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90 |
| { |
| Description konektor Cannon 25 pinu uhlovy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F_90/L |
| { |
| Description konektor Cannon 25 pinu uhlovy dlouhy , samice |
| Geometry.Height 13 mm |
| } |
| DECAL CANNON25F/T |
| { |
| Description konektor Cannon 25 pinu na lezato, samice |
| Geometry.Height 13 mm |
| } |
| DECAL SOD87 |
| { |
| Description dioda SMD v pouzdre SOD87 |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO201 |
| { |
| Description usm. dioda nad 1A roztec 13.97mm, 550mils |
| Geometry.Height 10mm |
| } |
| DECAL DO41 |
| { |
| Description usm. dioda do 1A roztec 8.89mm, 350mils |
| Geometry.Height 3.5mm |
| } |
| DECAL MELF |
| { |
| Description dioda SMD v pouzdre MELF |
| Geometry.Height 3 mm |
| } |
| DECAL MINIMELF |
| { |
| Description dioda SMD v pouzdre MINIMELF |
| Geometry.Height 1.8 mm |
| } |
| DECAL DO35 |
| { |
| Description vseob. dioda roztec 6.35mm, 250mils |
| Geometry.Height 3.5mm |
| } |
| DECAL DS040 |
| { |
| Description dioda nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL TO220AC |
| { |
| Description diodove pouzdro TO220AC |
| Geometry.Height 20mm |
| } |
| DECAL TO220AB |
| { |
| Description diodove pouzdro TO220AB |
| Geometry.Height 20mm |
| } |
| DECAL JUMP1 |
| { |
| Description jednorady hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP1_90 |
| { |
| Description jednorady uhlovy hrebinek 1 pin |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2 |
| { |
| Description jednorady hrebinek 2 piny |
| Geometry.Height 10 mm |
| } |
| DECAL JUMP2_90 |
| { |
| Description jednorady uhlovy hrebinek 2 piny |
| Geometry.Height 3 mm |
| } |
| DECAL ARK050X2 |
| { |
| Description svorkovnice se dvema piny, roztec 5.08 mm - 200 mils |
| Geometry.Height 13 mm |
| } |
| DECAL CROSS |
| { |
| Description usazovaci kriz |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M3 |
| { |
| Description otvor pro sroub M3 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M4 |
| { |
| Description otvor pro sroub M4 |
| Geometry.Height 0 mm |
| } |
| DECAL HOLE_M2 |
| { |
| Description otvor pro sroub M2 |
| Geometry.Height 0 mm |
| } |
| DECAL R0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| } |
| DECAL R0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| } |
| DECAL R1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| } |
| DECAL RS025 |
| { |
| Description bezny rezistor nastojato roztec 2,54 mm, 100 mils |
| Geometry.Height 9 mm |
| } |
| DECAL RL090 |
| { |
| Description bezny rezistor roztec 8.89mm, 350mils |
| Geometry.Height 3mm |
| } |
| DECAL RL140 |
| { |
| Description rezistor 2W nalezato roztec 13.97mm, 550mils |
| Geometry.Height 4.6mm |
| } |
| DECAL RS040 |
| { |
| Description rezistor 2W nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| } |
| DECAL R1812 |
| { |
| Description rezistor SMD velikost 1812 |
| Geometry.Height 1mm |
| } |
| DECAL DIP16_300 |
| { |
| Description pouzdro DIP16 roztec 7.62 mm - 300 mils |
| Geometry.Height 6 mm |
| } |
| PARTTYPE DB25M |
| { |
| Description ruzne verze DB25 samecek |
| } |
| PARTTYPE DB9F |
| { |
| Description ruzne verze DB9 samice |
| } |
| PARTTYPE DB25F |
| { |
| Description ruzne verze DB25 samice |
| } |
| PARTTYPE D |
| { |
| Value ??? |
| Description ruzne druhy diod |
| } |
| PARTTYPE HOLE |
| { |
| Description otvor pro ruzne prumery sroubu |
| } |
| PARTTYPE R |
| { |
| Value ??? |
| Description rezistory ruznych typu |
| } |
| PARTTYPE DIP16 |
| { |
| Description patice pro DIL16 |
| } |
| PCB DEFAULT |
| { |
| "DFT.Probe to Trace Clearance" 228600dbunit |
| "DFT.Probe to Pad Clearance" 228600dbunit |
| "DFT.Generate Test Points" No |
| "DFT.Allow Stubs" Yes |
| "DFT.Stub Length" 5715000dbunit |
| "DFT.Use Via Grid" Yes |
| "DFT.Grid X-Coordinate" 952500dbunit |
| "DFT.Grid Y-Coordinate" 952500dbunit |
| AutoDimensioning.Marker_Shape YYNNNY |
| AutoDimensioning.Text_NumberPrecision 0 1 2 |
| AutoDimensioning.Text_AngularPrecision 0 0 0 |
| AutoDimensioning.Text_Suffix mil##mm##" |
| AutoDimensioning.Text_Layer 24 |
| AutoDimensioning.Line_Layer 24 |
| AutoDimensioning.Preview_Type 1 |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD No |
| Rules.ViaAtSMD.FitInside Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Length.Unlimited Yes |
| Placement.Grid.Use No |
| Placement.Grid.X 3810000dbunit |
| Placement.Grid.Y 3810000dbunit |
| Accordion.Amplitude.Min 3 |
| Accordion.Gap.Min 1 |
| Routing.MaxChannelWidth 3810000dbunit |
| Routing.SoftLengthRrules Yes |
| Routing.MeanderBeforeTune No |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/Motory/verze2/zaloha/SPINACE02.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/SPINACE03.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze2/zaloha/spinace.opj |
|---|
| 0,0 → 1,149 |
| (ExpressProject "spinace" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\spinace.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "SPINACE.asc") |
| (OTHER_Netlist_File2 "SPINACE.CMP") |
| (OTHER_View_Output "TRUE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "1") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.DRC") |
| (BOM_Scope "0") |
| (BOM_Mode "0") |
| (BOM_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.BOM") |
| (BOM_Merge_Include "FALSE") |
| (BOM_Property_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_Header "Item\tQuantity\tReference\tPart") |
| (BOM_Include_File "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.INC") |
| (BOM_Include_File_Combine_7.0 "{Item}\t{Quantity}\t{Reference}\t{Value}") |
| (BOM_One_Part_Per_Line "FALSE") |
| (BOM_View_Output "TRUE")) |
| (Folder "Outputs" |
| (File ".\spinace.asc" |
| (Type "Report")) |
| (File ".\spinace.drc" |
| (Type "Report")) |
| (File ".\spinace.bom" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x") |
| (PartMRUSelector |
| (No_PCB_Device |
| (FullPartName "No_PCB_Device.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (HOLE_M3 |
| (FullPartName "HOLE_M3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB15F |
| (FullPartName "DB15F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\verze2\spinace.dsn") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\verze2\spinace.dsn" |
| "SCHEMATIC1") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\MOTOR\verze2\spinace.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 297")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -1 -1 88 730 88 412") |
| (Scroll "566 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\MOTOR\VERZE2\SPINACE.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/Motory/verze2/zaloha/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze3/SPINACE.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/verze3/readme.txt |
|---|
| 0,0 → 1,0 |
| vsechny soucastky jsou ze strany soucastek |
| /schemata/Motory/verze3/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/MOTOR BOARD.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/MOTOR BOARD.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/MOTOR BOARD.EDN |
|---|
| 0,0 → 1,237 |
| (edif (rename LED_board "LED board") |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2002 06 02 13 31 40) |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 23, 2002") |
| (comment "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell R |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT))))) |
| (cell JUMPER5 |
| (cellType generic) |
| (comment "From OrCAD library CONNECTOR.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT))))) |
| (cell LED |
| (cellType generic) |
| (comment "From OrCAD library DISCRETE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell (rename LED_board "LED board") |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance R1 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R2 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R3 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R4 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R5 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R6 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R7 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance R8 |
| (viewRef NetlistView |
| (cellRef R |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMPER5 |
| (libraryRef OrCAD_LIB)))) |
| (instance D1 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D2 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D3 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D4 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D5 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D6 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D7 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D8 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (instance D9 |
| (viewRef NetlistView |
| (cellRef LED |
| (libraryRef OrCAD_LIB)))) |
| (net N05262 |
| (joined |
| (portRef &2 (instanceRef D7)))) |
| (net N05090 |
| (joined |
| (portRef &2 (instanceRef D5)))) |
| (net N05060 |
| (joined |
| (portRef &2 (instanceRef D3)))) |
| (net N05075 |
| (joined |
| (portRef &2 (instanceRef D4)))) |
| (net N05105 |
| (joined |
| (portRef &2 (instanceRef D6)))) |
| (net N05045 |
| (joined |
| (portRef &2 (instanceRef D2)))) |
| (net N05895 |
| (joined |
| (portRef &2 (instanceRef D8)))) |
| (net N06519 |
| (joined |
| (portRef &2 (instanceRef D1)))) |
| (net N06561 |
| (joined |
| (portRef &1 (instanceRef D9)) |
| (portRef &9 (instanceRef J3)))) |
| (net N05788 |
| (joined |
| (portRef &2 (instanceRef D9)) |
| (portRef &10 (instanceRef J3)))) |
| (net N02327 |
| (joined |
| (portRef &2 (instanceRef R5)) |
| (portRef &5 (instanceRef J3)))) |
| (net N000910 |
| (joined |
| (portRef &1 (instanceRef R5)) |
| (portRef &1 (instanceRef D5)))) |
| (net N02513 |
| (joined |
| (portRef &2 (instanceRef R6)) |
| (portRef &6 (instanceRef J3)))) |
| (net N001130 |
| (joined |
| (portRef &1 (instanceRef D6)) |
| (portRef &1 (instanceRef R6)))) |
| (net N02272 |
| (joined |
| (portRef &2 (instanceRef R7)) |
| (portRef &7 (instanceRef J3)))) |
| (net N001350 |
| (joined |
| (portRef &1 (instanceRef D7)) |
| (portRef &1 (instanceRef R7)))) |
| (net N02086 |
| (joined |
| (portRef &8 (instanceRef J3)) |
| (portRef &2 (instanceRef R8)))) |
| (net N001570 |
| (joined |
| (portRef &1 (instanceRef D8)) |
| (portRef &1 (instanceRef R8)))) |
| (net N07364 |
| (joined |
| (portRef &2 (instanceRef R1)) |
| (portRef &1 (instanceRef J3)))) |
| (net N000030 |
| (joined |
| (portRef &1 (instanceRef D1)) |
| (portRef &1 (instanceRef R1)))) |
| (net N04007 |
| (joined |
| (portRef &2 (instanceRef J3)) |
| (portRef &2 (instanceRef R2)))) |
| (net N000250 |
| (joined |
| (portRef &1 (instanceRef D2)) |
| (portRef &1 (instanceRef R2)))) |
| (net N02382 |
| (joined |
| (portRef &3 (instanceRef J3)) |
| (portRef &2 (instanceRef R3)))) |
| (net N000470 |
| (joined |
| (portRef &1 (instanceRef R3)) |
| (portRef &1 (instanceRef D3)))) |
| (net N03322 |
| (joined |
| (portRef &2 (instanceRef R4)) |
| (portRef &4 (instanceRef J3)))) |
| (net N000690 |
| (joined |
| (portRef &1 (instanceRef R4)) |
| (portRef &1 (instanceRef D4)))))))) |
| (design (rename LED_board "LED board") |
| (cellRef LED_board |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/zaloha/MOTOR BOARD.ERR |
|---|
| 0,0 → 1,4 |
| AutoECO Error Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| No errors found |
| /schemata/Motory/zaloha/MOTOR BOARD.EXP |
|---|
| 0,0 → 1,0 |
| "DESIGN" "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" "LOGICAL" |
| /schemata/Motory/zaloha/MOTOR BOARD.LIS |
|---|
| 0,0 → 1,57 |
| AutoECO Report |
| FILE-A: D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| FILE-B: D:\@KAKLIK\MOTOR\MOTOR BOARD.MNL |
| If "*EOF*" immediately follows, no changes were made |
| Adding footprint R |
| Adding package R |
| Adding package LED |
| Adding package JUMPER5 |
| Adding component R6 |
| Adding component D1 |
| Found library footprint with same name as part LED |
| Adding component D2 |
| Adding component R7 |
| Adding component D3 |
| Adding component D4 |
| Adding component R1 |
| Adding component R8 |
| Adding component D5 |
| Adding component R2 |
| Adding component D6 |
| Adding component D7 |
| Adding component D9 |
| Adding component R3 |
| Adding component D8 |
| Adding component R4 |
| Adding component R5 |
| Adding component J3 |
| Found footprint BLKCON.100/VH/TM2OE/W.200/10 from PRT file for part JUMPER5, comp J3 |
| Adding net N000250 |
| Adding net N000470 |
| Adding net N000690 |
| Adding net N000910 |
| Adding net N001130 |
| Adding net N001350 |
| Adding net N001570 |
| Adding net N05262 |
| Adding net N05090 |
| Adding net N05060 |
| Adding net N05075 |
| Adding net N05105 |
| Adding net N05045 |
| Adding net N05895 |
| Adding net N06519 |
| Adding net N000030 |
| Adding net N02513 |
| Adding net N02382 |
| Adding net N02272 |
| Adding net N02327 |
| Adding net N06561 |
| Adding net N05788 |
| Adding net N03322 |
| Adding net N02086 |
| Adding net N07364 |
| Adding net N04007 |
| Deleting net DEFAULT |
| *EOF* |
| No errors found |
| /schemata/Motory/zaloha/MOTOR BOARD.MAX |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/MOTOR BOARD.MNL |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/MOTOR BOARD.NET |
|---|
| 0,0 → 1,125 |
| (netlist "D:\@KAKLIK\MOTOR\MOTOR BOARD.DSN" |
| (compinst "D1" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D2" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D3" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D4" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D5" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D6" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D7" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D8" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "D9" |
| (patternName "LED") |
| (compvalue "LED")) |
| (compinst "J3" |
| (patternName "JUMPER5") |
| (compvalue "JUMPER5")) |
| (compinst "R1" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R2" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R3" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R4" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R5" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R6" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R7" |
| (patternName "R") |
| (compvalue "220")) |
| (compinst "R8" |
| (patternName "R") |
| (compvalue "220")) |
| (net "N000250" |
| (node "D2" "1") |
| (node "R2" "1")) |
| (net "N000470" |
| (node "R3" "1") |
| (node "D3" "1")) |
| (net "N000690" |
| (node "R4" "1") |
| (node "D4" "1")) |
| (net "N000910" |
| (node "R5" "1") |
| (node "D5" "1")) |
| (net "N001130" |
| (node "D6" "1") |
| (node "R6" "1")) |
| (net "N001350" |
| (node "D7" "1") |
| (node "R7" "1")) |
| (net "N001570" |
| (node "D8" "1") |
| (node "R8" "1")) |
| (net "N05262" |
| (node "D7" "2")) |
| (net "N05090" |
| (node "D5" "2")) |
| (net "N05060" |
| (node "D3" "2")) |
| (net "N05075" |
| (node "D4" "2")) |
| (net "N05105" |
| (node "D6" "2")) |
| (net "N05045" |
| (node "D2" "2")) |
| (net "N05895" |
| (node "D8" "2")) |
| (net "N06519" |
| (node "D1" "2")) |
| (net "N000030" |
| (node "D1" "1") |
| (node "R1" "1")) |
| (net "N02513" |
| (node "R6" "2") |
| (node "J3" "6")) |
| (net "N02382" |
| (node "J3" "3") |
| (node "R3" "2")) |
| (net "N02272" |
| (node "R7" "2") |
| (node "J3" "7")) |
| (net "N02327" |
| (node "R5" "2") |
| (node "J3" "5")) |
| (net "N06561" |
| (node "D9" "1") |
| (node "J3" "9")) |
| (net "N05788" |
| (node "D9" "2") |
| (node "J3" "10")) |
| (net "N03322" |
| (node "R4" "2") |
| (node "J3" "4")) |
| (net "N02086" |
| (node "J3" "8") |
| (node "R8" "2")) |
| (net "N07364" |
| (node "R1" "2") |
| (node "J3" "1")) |
| (net "N04007" |
| (node "J3" "2") |
| (node "R2" "2"))) |
| /schemata/Motory/zaloha/MOTOR BOARD.ONL |
|---|
| 0,0 → 1,265 |
| (PCB "MOTOR BOARD" |
| (description |
| (timeStamp "2002 06 02 07 16 34") |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Saturday, March 23, 2002") |
| (document "D:\\@KAKLIK\\MOTOR\\MOTOR BOARD.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMPER5 |
| (place J3 |
| (property |
| (timestamp 00000683) |
| ("Source Package" JUMPER5) |
| (Value JUMPER5)))) |
| (component LED |
| (place D1 |
| (property |
| (timestamp 00000003) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D2 |
| (property |
| (timestamp 00000019) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D3 |
| (property |
| (timestamp 0000002F) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D4 |
| (property |
| (timestamp 00000045) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D5 |
| (property |
| (timestamp 0000005B) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D6 |
| (property |
| (timestamp 00000071) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D7 |
| (property |
| (timestamp 00000087) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D8 |
| (property |
| (timestamp 0000009D) |
| ("Source Package" LED) |
| (Value LED))) |
| (place D9 |
| (property |
| (timestamp 00001905) |
| ("Source Package" LED) |
| (Value LED)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000227) |
| ("Source Package" R) |
| (Value 220))) |
| (place R2 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000024A) |
| ("Source Package" R) |
| (Value 220))) |
| (place R3 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000026D) |
| ("Source Package" R) |
| (Value 220))) |
| (place R4 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 00000290) |
| ("Source Package" R) |
| (Value 220))) |
| (place R5 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002B3) |
| ("Source Package" R) |
| (Value 220))) |
| (place R6 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002D6) |
| ("Source Package" R) |
| (Value 220))) |
| (place R7 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 000002F9) |
| ("Source Package" R) |
| (Value 220))) |
| (place R8 |
| (property |
| ("PCB Footprint" R) |
| (timestamp 0000031C) |
| ("Source Package" R) |
| (Value 220))))) |
| (library |
| (image R |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMPER5 |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\CONNECTOR.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4)))) |
| (image LED |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\DISCRETE.OLB")) |
| (pin 999 1 |
| (property |
| (pinname ANODE) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname CATHODE) |
| (pintype 4))))) |
| (network |
| (net N000250 |
| (pins |
| D2-1 R2-1)) |
| (net N000470 |
| (pins |
| R3-1 D3-1)) |
| (net N000690 |
| (pins |
| R4-1 D4-1)) |
| (net N000910 |
| (pins |
| R5-1 D5-1)) |
| (net N001130 |
| (pins |
| D6-1 R6-1)) |
| (net N001350 |
| (pins |
| D7-1 R7-1)) |
| (net N001570 |
| (pins |
| D8-1 R8-1)) |
| (net N05262 |
| (pins |
| D7-2)) |
| (net N05090 |
| (pins |
| D5-2)) |
| (net N05060 |
| (pins |
| D3-2)) |
| (net N05075 |
| (pins |
| D4-2)) |
| (net N05105 |
| (pins |
| D6-2)) |
| (net N05045 |
| (pins |
| D2-2)) |
| (net N05895 |
| (pins |
| D8-2)) |
| (net N06519 |
| (pins |
| D1-2)) |
| (net N000030 |
| (pins |
| D1-1 R1-1)) |
| (net N02513 |
| (pins |
| R6-2 J3-6)) |
| (net N02382 |
| (pins |
| J3-3 R3-2)) |
| (net N02272 |
| (pins |
| R7-2 J3-7)) |
| (net N02327 |
| (pins |
| R5-2 J3-5)) |
| (net N06561 |
| (pins |
| D9-1 J3-9)) |
| (net N05788 |
| (pins |
| D9-2 J3-10)) |
| (net N03322 |
| (pins |
| R4-2 J3-4)) |
| (net N02086 |
| (pins |
| J3-8 R8-2)) |
| (net N07364 |
| (pins |
| R1-2 J3-1)) |
| (net N04007 |
| (pins |
| J3-2 R2-2))) |
| ) |
| /schemata/Motory/zaloha/TEST.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/TEST.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/TRANZISTORY.LLB |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/ULN2003.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/ULN2003.DRC |
|---|
| 0,0 → 1,104 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking Off-Page Connections |
| Checking Pin to Port Connections |
| Checking for Invalid References |
| Checking for Duplicate References |
| Checking for Compatibility with SDT |
| Reporting Off-Grid Objects |
| Reporting Net Names |
| N36937 |
| N37144 |
| N37348 |
| N37007 |
| N37211 |
| N36870 |
| N37074 |
| N37418 |
| N37281 |
| N36800 |
| N40223 |
| N40337 |
| N40406 |
| N42209 |
| N42326 |
| N41046 |
| N42437 |
| N42556 |
| N42675 |
| N42794 |
| N43077 |
| N43185 |
| N43293 |
| N43401 |
| N25451 |
| N19393 |
| N13996 |
| N13617 |
| N14493 |
| N13703 |
| N19493 |
| N15219 |
| N13531 |
| N14688 |
| N13359 |
| N14585 |
| N25474 |
| N14796 |
| N15322 |
| N19443 |
| N25409 |
| N15006 |
| N14903 |
| N13445 |
| N18998 |
| N19048 |
| N19217 |
| N40597 |
| N19163 |
| N51332 |
| N37732 |
| N37627 |
| N51243 |
| N37522 |
| N51109 |
| N55592 |
| N54463 |
| N50188 |
| N50158 |
| N38097 |
| N53250 |
| N53070 |
| N38198 |
| N50008 |
| N50032 |
| +5V |
| VCC |
| Alternate Name: Vcc |
| GND |
| N61737 |
| N60796 |
| N61407 |
| N61514 |
| N61077 |
| N60981 |
| N61630 |
| N60885 |
| N61173 |
| N60391 |
| N59355 |
| N59497 |
| /schemata/Motory/zaloha/ULN2003.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Motory/zaloha/ULN2003.EDN |
|---|
| 0,0 → 1,520 |
| (edif SCHEMATIC1 |
| (edifVersion 2 0 0) |
| (edifLevel 0) |
| (keywordMap (keywordLevel 0)) |
| (status |
| (written |
| (timeStamp 2003 03 27 12 18 04) |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (comment "Original data from OrCAD/CAPTURE schematic")) |
| (comment "") |
| (comment "Saturday, March 22, 2003") |
| (comment "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DSN") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "") |
| (comment "")) |
| (external OrCAD_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell DB9F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT))))) |
| (cell DB25M |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DB25F |
| (cellType generic) |
| (comment "From OrCAD library GEN_CON.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT)) |
| (port &17 (direction INOUT)) |
| (port &18 (direction INOUT)) |
| (port &19 (direction INOUT)) |
| (port &20 (direction INOUT)) |
| (port &21 (direction INOUT)) |
| (port &22 (direction INOUT)) |
| (port &23 (direction INOUT)) |
| (port &24 (direction INOUT)) |
| (port &25 (direction INOUT))))) |
| (cell DIP16_300 |
| (cellType generic) |
| (comment "From OrCAD library DECALES.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell ULN2003 |
| (cellType generic) |
| (comment "From OrCAD library RUZNE.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT)) |
| (port &9 (direction INOUT)) |
| (port &10 (direction INOUT)) |
| (port &11 (direction INOUT)) |
| (port &12 (direction INOUT)) |
| (port &13 (direction INOUT)) |
| (port &14 (direction INOUT)) |
| (port &15 (direction INOUT)) |
| (port &16 (direction INOUT))))) |
| (cell JUMP3 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT))))) |
| (cell JUMP5 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT))))) |
| (cell JUMP4 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT))))) |
| (cell JUMP8 |
| (cellType generic) |
| (comment "From OrCAD library JUMP.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &1 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &3 (direction INOUT)) |
| (port &4 (direction INOUT)) |
| (port &5 (direction INOUT)) |
| (port &6 (direction INOUT)) |
| (port &7 (direction INOUT)) |
| (port &8 (direction INOUT))))) |
| (cell PHONEJACKSTEREO |
| (cellType generic) |
| (comment "From OrCAD library _SENO_.OLB") |
| (view NetlistView |
| (viewType netlist) |
| (interface |
| (port &3 (direction INOUT)) |
| (port &2 (direction INOUT)) |
| (port &1 (direction INOUT)))))) |
| (library MAIN_LIB |
| (edifLevel 0) |
| (technology |
| (numberDefinition |
| (scale 1 1 (unit distance)))) |
| (cell SCHEMATIC1 |
| (cellType generic) |
| (view NetlistView |
| (viewType netlist) |
| (interface) |
| (contents |
| (instance CON2 |
| (viewRef NetlistView |
| (cellRef DB9F |
| (libraryRef OrCAD_LIB)))) |
| (instance CON4 |
| (viewRef NetlistView |
| (cellRef DB25M |
| (libraryRef OrCAD_LIB)))) |
| (instance CON5 |
| (viewRef NetlistView |
| (cellRef DB25F |
| (libraryRef OrCAD_LIB)))) |
| (instance U1 |
| (viewRef NetlistView |
| (cellRef DIP16_300 |
| (libraryRef OrCAD_LIB)))) |
| (instance U2 |
| (viewRef NetlistView |
| (cellRef ULN2003 |
| (libraryRef OrCAD_LIB)))) |
| (instance J11 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J12 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J13 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J14 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J1 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J2 |
| (viewRef NetlistView |
| (cellRef JUMP4 |
| (libraryRef OrCAD_LIB)))) |
| (instance J3 |
| (viewRef NetlistView |
| (cellRef JUMP8 |
| (libraryRef OrCAD_LIB)))) |
| (instance J4 |
| (viewRef NetlistView |
| (cellRef PHONEJACKSTEREO |
| (libraryRef OrCAD_LIB)))) |
| (instance J5 |
| (viewRef NetlistView |
| (cellRef JUMP5 |
| (libraryRef OrCAD_LIB)))) |
| (instance J6 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J7 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (instance J8 |
| (viewRef NetlistView |
| (cellRef JUMP3 |
| (libraryRef OrCAD_LIB)))) |
| (net N19443 |
| (joined |
| (portRef &4 (instanceRef CON2)) |
| (portRef &6 (instanceRef U1)) |
| (portRef &2 (instanceRef J6)))) |
| (net N13996 |
| (joined |
| (portRef &2 (instanceRef J2)) |
| (portRef &14 (instanceRef CON4)) |
| (portRef &3 (instanceRef U1)))) |
| (net N19393 |
| (joined |
| (portRef &3 (instanceRef CON2)) |
| (portRef &5 (instanceRef U1)) |
| (portRef &1 (instanceRef J6)))) |
| (net N19493 |
| (joined |
| (portRef &7 (instanceRef CON2)) |
| (portRef &7 (instanceRef U1)) |
| (portRef &3 (instanceRef J6)))) |
| (net N25451 |
| (joined |
| (portRef &4 (instanceRef U1)) |
| (portRef &3 (instanceRef J2)) |
| (portRef &16 (instanceRef CON4)))) |
| (net N25409 |
| (joined |
| (portRef &1 (instanceRef J2)) |
| (portRef &1 (instanceRef CON4)) |
| (portRef &2 (instanceRef U1)))) |
| (net N15322 |
| (joined |
| (portRef &2 (instanceRef CON4)) |
| (portRef &8 (instanceRef J3)) |
| (portRef &1 (instanceRef U1)))) |
| (net N13359 |
| (joined |
| (portRef &10 (instanceRef CON4)) |
| (portRef &5 (instanceRef J1)) |
| (portRef &10 (instanceRef CON5)))) |
| (net N13445 |
| (joined |
| (portRef &11 (instanceRef CON4)) |
| (portRef &4 (instanceRef J1)) |
| (portRef &11 (instanceRef CON5)))) |
| (net N13531 |
| (joined |
| (portRef &12 (instanceRef CON4)) |
| (portRef &3 (instanceRef J1)) |
| (portRef &12 (instanceRef CON5)))) |
| (net N13617 |
| (joined |
| (portRef &13 (instanceRef CON4)) |
| (portRef &2 (instanceRef J1)) |
| (portRef &13 (instanceRef CON5)))) |
| (net N36937 |
| (joined |
| (portRef &20 (instanceRef CON4)) |
| (portRef &1 (instanceRef J13)))) |
| (net N37144 |
| (joined |
| (portRef &21 (instanceRef CON5)) |
| (portRef &2 (instanceRef J12)))) |
| (net N37348 |
| (joined |
| (portRef &23 (instanceRef CON4)) |
| (portRef &1 (instanceRef J8)))) |
| (net N37007 |
| (joined |
| (portRef &20 (instanceRef CON5)) |
| (portRef &2 (instanceRef J13)))) |
| (net N37211 |
| (joined |
| (portRef &22 (instanceRef CON4)) |
| (portRef &1 (instanceRef J11)))) |
| (net N36870 |
| (joined |
| (portRef &19 (instanceRef CON5)) |
| (portRef &2 (instanceRef J14)))) |
| (net N37074 |
| (joined |
| (portRef &21 (instanceRef CON4)) |
| (portRef &1 (instanceRef J12)))) |
| (net N37418 |
| (joined |
| (portRef &23 (instanceRef CON5)) |
| (portRef &2 (instanceRef J8)))) |
| (net N37281 |
| (joined |
| (portRef &22 (instanceRef CON5)) |
| (portRef &2 (instanceRef J11)))) |
| (net N36800 |
| (joined |
| (portRef &19 (instanceRef CON4)) |
| (portRef &1 (instanceRef J14)))) |
| (net N28601 |
| (joined |
| (portRef &24 (instanceRef CON4)) |
| (portRef &2 (instanceRef J7)))) |
| (net N13703 |
| (joined |
| (portRef &15 (instanceRef CON4)) |
| (portRef &1 (instanceRef J1)) |
| (portRef &15 (instanceRef CON5)))) |
| (net N25474 |
| (joined |
| (portRef &17 (instanceRef CON4)) |
| (portRef &4 (instanceRef J2)) |
| (portRef &17 (instanceRef CON5)))) |
| (net N40223 |
| (joined |
| (portRef &10 (instanceRef U1)) |
| (portRef &3 (instanceRef J14)))) |
| (net N40337 |
| (joined |
| (portRef &11 (instanceRef U1)) |
| (portRef &3 (instanceRef J13)))) |
| (net N40406 |
| (joined |
| (portRef &12 (instanceRef U1)) |
| (portRef &3 (instanceRef J12)))) |
| (net N19163 |
| (joined |
| (portRef &6 (instanceRef CON2)) |
| (portRef &3 (instanceRef J5)))) |
| (net N19217 |
| (joined |
| (portRef &4 (instanceRef J5)) |
| (portRef &8 (instanceRef CON2)))) |
| (net N19271 |
| (joined |
| (portRef &9 (instanceRef CON2)) |
| (portRef &5 (instanceRef J5)))) |
| (net N19048 |
| (joined |
| (portRef &2 (instanceRef CON2)) |
| (portRef &3 (instanceRef J11)) |
| (portRef &2 (instanceRef J5)))) |
| (net N18998 |
| (joined |
| (portRef &1 (instanceRef J5)) |
| (portRef &1 (instanceRef CON2)) |
| (portRef &3 (instanceRef J8)))) |
| (net N14796 |
| (joined |
| (portRef &4 (instanceRef J3)) |
| (portRef &4 (instanceRef U2)) |
| (portRef &6 (instanceRef CON4)))) |
| (net N15006 |
| (joined |
| (portRef &4 (instanceRef CON4)) |
| (portRef &6 (instanceRef U2)) |
| (portRef &6 (instanceRef J3)))) |
| (net N14903 |
| (joined |
| (portRef &5 (instanceRef CON4)) |
| (portRef &5 (instanceRef U2)) |
| (portRef &5 (instanceRef J3)))) |
| (net N14585 |
| (joined |
| (portRef &8 (instanceRef CON4)) |
| (portRef &2 (instanceRef U2)) |
| (portRef &2 (instanceRef J3)))) |
| (net N14688 |
| (joined |
| (portRef &7 (instanceRef CON4)) |
| (portRef &3 (instanceRef J3)) |
| (portRef &3 (instanceRef U2)))) |
| (net N14493 |
| (joined |
| (portRef &1 (instanceRef J3)) |
| (portRef &9 (instanceRef CON4)) |
| (portRef &1 (instanceRef U2)))) |
| (net N15219 |
| (joined |
| (portRef &3 (instanceRef CON4)) |
| (portRef &7 (instanceRef U2)) |
| (portRef &7 (instanceRef J3)))) |
| (net N42209 |
| (joined |
| (portRef &15 (instanceRef U2)) |
| (portRef &8 (instanceRef CON5)))) |
| (net (rename PLUSV "+V") |
| (joined |
| (portRef &9 (instanceRef U1)) |
| (portRef &3 (instanceRef J4)) |
| (portRef &2 (instanceRef J4)) |
| (portRef &1 (instanceRef J7)) |
| (portRef &24 (instanceRef CON5)) |
| (portRef &9 (instanceRef U2)))) |
| (net N42326 |
| (joined |
| (portRef &14 (instanceRef U2)) |
| (portRef &7 (instanceRef CON5)))) |
| (net N41046 |
| (joined |
| (portRef &16 (instanceRef U2)) |
| (portRef &9 (instanceRef CON5)))) |
| (net N42437 |
| (joined |
| (portRef &13 (instanceRef U2)) |
| (portRef &6 (instanceRef CON5)))) |
| (net N42556 |
| (joined |
| (portRef &12 (instanceRef U2)) |
| (portRef &5 (instanceRef CON5)))) |
| (net N42675 |
| (joined |
| (portRef &11 (instanceRef U2)) |
| (portRef &4 (instanceRef CON5)))) |
| (net N42794 |
| (joined |
| (portRef &10 (instanceRef U2)) |
| (portRef &3 (instanceRef CON5)))) |
| (net GND |
| (joined |
| (portRef &5 (instanceRef CON2)) |
| (portRef &25 (instanceRef CON4)) |
| (portRef &8 (instanceRef U2)) |
| (portRef &8 (instanceRef U1)) |
| (portRef &18 (instanceRef CON4)) |
| (portRef &1 (instanceRef J4)) |
| (portRef &3 (instanceRef J7)) |
| (portRef &25 (instanceRef CON5)) |
| (portRef &18 (instanceRef CON5)))) |
| (net N43077 |
| (joined |
| (portRef &16 (instanceRef U1)) |
| (portRef &2 (instanceRef CON5)))) |
| (net N43185 |
| (joined |
| (portRef &15 (instanceRef U1)) |
| (portRef &1 (instanceRef CON5)))) |
| (net N43293 |
| (joined |
| (portRef &14 (instanceRef U1)) |
| (portRef &14 (instanceRef CON5)))) |
| (net N43401 |
| (joined |
| (portRef &13 (instanceRef U1)) |
| (portRef &16 (instanceRef CON5)))))))) |
| (design SCHEMATIC1 |
| (cellRef SCHEMATIC1 |
| (libraryRef MAIN_LIB)))) |
| /schemata/Motory/zaloha/ULN2003.ONL |
|---|
| 0,0 → 1,243 |
| (PCB ULN2003 |
| (description |
| (timeStamp "2003 03 05 21 31 15") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Wednesday, March 05, 2003") |
| (document "D:\\@KAKLIK\\SCHEMATA\\MOTOR\\ULN2003.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP1 |
| (place J6 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010ED3) |
| ("Source Package" JUMP1) |
| (Value JUMP1))) |
| (place J7 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00010EEB) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component PRIM20 |
| (place CON6 |
| (property |
| ("PCB Footprint" PRIM20) |
| (Device PRIM20) |
| (timestamp 00010F4B) |
| ("Source Package" PRIM20) |
| (Value PRIM20)))) |
| (component DB15M |
| (place CON3 |
| (property |
| ("PCB Footprint" CANNON15M_90) |
| (Device DB15M) |
| (timestamp 00010F17) |
| ("Source Package" DB15M) |
| (Value DB15M))))) |
| (library |
| (image DB15M |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB) |
| (Device DB15M)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4)))) |
| (image PRIM20 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_CON.OLB)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname 9) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname 10) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname 11) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname 12) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname 13) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname 14) |
| (pintype 4))) |
| (pin 999 15 |
| (property |
| (pinname 15) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname 16) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname 17) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname 18) |
| (pintype 4))) |
| (pin 999 19 |
| (property |
| (pinname 19) |
| (pintype 4))) |
| (pin 999 20 |
| (property |
| (pinname 20) |
| (pintype 4)))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))))) |
| (network |
| (net N59497 |
| (pins |
| CON3-4 CON3-5 J7-1)) |
| (net N61407 |
| (pins |
| CON3-11 CON6-13)) |
| (net N61737 |
| (pins |
| CON3-14 CON6-19)) |
| (net N61173 |
| (pins |
| CON3-10 CON6-11)) |
| (net N61630 |
| (pins |
| CON3-13 CON6-17)) |
| (net N61077 |
| (pins |
| CON3-15 CON6-9)) |
| (net N60981 |
| (pins |
| CON3-7 CON6-7)) |
| (net N61514 |
| (pins |
| CON3-12 CON6-15)) |
| (net N59355 |
| (pins |
| CON3-1 J6-1 CON3-8 CON3-9)) |
| (net N60885 |
| (pins |
| CON3-6 CON6-5)) |
| (net N60796 |
| (pins |
| CON3-3 CON6-3)) |
| (net N60391 |
| (pins |
| CON3-2 CON6-1))) |
| ) |
| /schemata/Motory/zaloha/ULN2003.asc |
|---|
| 0,0 → 1,33 |
| *PADS-PCB* |
| *PART* |
| CON3 DB15M@CANNON15M_90 |
| CON6 PRIM20@PRIM20 |
| J6 JUMP1@JUMP1 |
| J7 JUMP1@JUMP1 |
| *NET* |
| *SIGNAL* N59497 |
| CON3.4 CON3.5 J7.1 |
| *SIGNAL* N61407 |
| CON3.11 CON6.13 |
| *SIGNAL* N61737 |
| CON3.14 CON6.19 |
| *SIGNAL* N61173 |
| CON3.10 CON6.11 |
| *SIGNAL* N61630 |
| CON3.13 CON6.17 |
| *SIGNAL* N61077 |
| CON3.15 CON6.9 |
| *SIGNAL* N60981 |
| CON3.7 CON6.7 |
| *SIGNAL* N61514 |
| CON3.12 CON6.15 |
| *SIGNAL* N59355 |
| CON3.1 J6.1 CON3.8 CON3.9 |
| *SIGNAL* N60885 |
| CON3.6 CON6.5 |
| *SIGNAL* N60796 |
| CON3.3 CON6.3 |
| *SIGNAL* N60391 |
| CON3.2 CON6.1 |
| *END* |
| /schemata/Motory/zaloha/ULN2003.net |
|---|
| 0,0 → 1,102 |
| *PADS-PCB* |
| *PART* |
| CON1 DB25F,DB25F@CANNON25F_90 |
| CON2 DB9F,DB9F@CANNON9F_90 |
| J1 JUMP5,vstup@JUMP5 |
| J10 JUMP2X7,JUMP2X7@JUMP2X7 |
| J2 JUMP4,vstupvystup@JUMP4 |
| J3 JUMP8,vystup@JUMP8 |
| J4 ,PHONEJACKSTEREO@JACK35 |
| J5 JUMP5,vstup_com@JUMP5 |
| J6 JUMP3,vystup_com@JUMP3 |
| J9 JUMP2X7,JUMP2X7@JUMP2X7 |
| U1 DIP16,ULN2003@DIP16_300 |
| U2 DIP16,ULN2003@DIP16_300 |
| *NET* |
| *SIGNAL* N18998 |
| J5.1 CON2.1 |
| *SIGNAL* N19048 |
| J5.2 CON2.2 |
| *SIGNAL* N19163 |
| J5.3 CON2.6 |
| *SIGNAL* N19271 |
| J5.5 CON2.9 |
| *SIGNAL* N19217 |
| J5.4 CON2.8 |
| *SIGNAL* N19393 |
| CON2.3 U1.5 J6.1 |
| *SIGNAL* N19443 |
| CON2.4 U1.6 J6.2 |
| *SIGNAL* N19493 |
| CON2.7 U1.7 J6.3 |
| *SIGNAL* N21675 |
| J9.9 U2.12 |
| *SIGNAL* N21413 |
| J9.3 U2.15 |
| *SIGNAL* N21587 |
| J9.7 U2.13 |
| *SIGNAL* N13359 |
| J1.5 CON1.10 |
| *SIGNAL* N21499 |
| J9.5 U2.14 |
| *SIGNAL* N13445 |
| J1.4 CON1.11 |
| *SIGNAL* N21331 |
| J9.1 U2.16 |
| *SIGNAL* N13531 |
| J1.3 CON1.12 |
| *SIGNAL* N13617 |
| J1.2 CON1.13 |
| *SIGNAL* N13703 |
| CON1.15 J1.1 |
| *SIGNAL* N14585 |
| CON1.8 U2.2 J3.2 |
| *SIGNAL* N14796 |
| CON1.6 U2.4 J3.4 |
| *SIGNAL* N14493 |
| CON1.9 U2.1 J3.1 |
| *SIGNAL* N14903 |
| CON1.5 U2.5 J3.5 |
| *SIGNAL* N15006 |
| CON1.4 U2.6 J3.6 |
| *SIGNAL* N15322 |
| CON1.2 U1.1 J3.8 |
| *SIGNAL* GND |
| CON1.21 CON1.22 CON1.25 CON1.18 CON1.23 CON1.19 CON1.20 U1.8 |
| CON1.24 U2.8 CON2.5 J4.1 |
| *SIGNAL* N15219 |
| CON1.3 U2.7 J3.7 |
| *SIGNAL* N22653 |
| J10.5 U1.14 |
| *SIGNAL* N22313 |
| J9.11 U2.11 |
| *SIGNAL* N22399 |
| J9.13 U2.10 |
| *SIGNAL* N22485 |
| J10.1 U1.16 |
| *SIGNAL* N22999 |
| J10.13 U1.10 |
| *SIGNAL* N22913 |
| J10.11 U1.11 |
| *SIGNAL* N22827 |
| J10.9 U1.12 |
| *SIGNAL* N22567 |
| J10.3 U1.15 |
| *SIGNAL* N22739 |
| J10.7 U1.13 |
| *SIGNAL* N25409 |
| CON1.1 U1.2 J2.1 |
| *SIGNAL* N13996 |
| J2.2 CON1.14 U1.3 |
| *SIGNAL* N25451 |
| CON1.16 U1.4 J2.3 |
| *SIGNAL* N25474 |
| CON1.17 J2.4 |
| *SIGNAL* N14688 |
| CON1.7 U2.3 J3.3 |
| *SIGNAL* +V |
| U1.9 U2.9 J9.2 J9.4 J9.6 J9.8 J9.10 J9.12 |
| J9.14 J10.2 J10.4 J10.6 J10.8 J10.10 J10.12 J10.14 |
| J4.3 J4.2 |
| *END* |
| /schemata/Motory/zaloha/ULN2003.opj |
|---|
| 0,0 → 1,160 |
| (ExpressProject "ULN2003" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\uln2003.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "ULN2003.asc") |
| (OTHER_Netlist_File2 "ULN2003.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EDIF_Netlist_File "ULN2003.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "TRUE") |
| (DRC_Check_Off-Page_Connectors "TRUE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "TRUE") |
| (DRC_Report_Off-grid_Objects "TRUE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "TRUE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\MOTOR\ULN2003.DRC") |
| (RootChangedForceReNetlist "x")) |
| (Folder "Outputs" |
| (File ".\uln2003.net" |
| (Type "Report")) |
| (File ".\uln2003.asc" |
| (Type "Report")) |
| (File ".\uln2003.edn" |
| (Type "Report")) |
| (File ".\uln2003.drc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PADRC_5x6 |
| (FullPartName "PADRC_5x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (JUMP5 |
| (FullPartName "JUMP5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (PRIM20 |
| (FullPartName "PRIM20.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (PADRC_2x6 |
| (FullPartName "PADRC_2x6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (PRIM10 |
| (FullPartName "PRIM10.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB15M |
| (FullPartName "DB15M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (RS232JUMP2X5 |
| (FullPartName "RS232JUMP2X5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (KP_1040 |
| (FullPartName "KP_1040.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (PHONEJACKSTEREO |
| (FullPartName "PHONEJACKSTEREO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\_SENO_.OLB") |
| (DeviceIndex "0")) |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP2X7 |
| (FullPartName "JUMP2X7.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DB25F |
| (FullPartName "DB25F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB25M |
| (FullPartName "DB25M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (DB9F |
| (FullPartName "DB9F.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0")) |
| (ULN2003 |
| (FullPartName "ULN2003.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (JUMP4 |
| (FullPartName "JUMP4.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (DIP16_300 |
| (FullPartName "DIP16_300.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\DECALES.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\MOTOR\uln2003.dsn" |
| "SCHEMATIC1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\orcad9x")) |
| /schemata/Motory/zaloha/layout.log |
|---|
| 0,0 → 1,1498 |
| Wed Mar 20 22:49:21 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:49:22 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:49:22 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:50:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:50:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\library\Ex_gui.llb |
| Wed Mar 20 22:51:31 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:46 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:47 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:51:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:15 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:18 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:19 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:43 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:49 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:51 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:55 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:52:57 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:53:28 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:44 Windows which were open at time of error: |
| Wed Mar 20 22:53:44 End-of-list |
| Wed Mar 20 22:53:54 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:53:55 Windows which were open at time of error: |
| Wed Mar 20 22:53:55 ActiveWindow: &Components |
| Wed Mar 20 22:53:55 Icon: &Nets |
| Wed Mar 20 22:53:55 Icon: Post Proces&s |
| Wed Mar 20 22:53:55 Icon: &Route |
| Wed Mar 20 22:53:55 End-of-list |
| Wed Mar 20 22:54:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:27 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:54:27 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\DEFAULT.MAX |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:54:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:02 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:32 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:37 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:38 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:39 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:40 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:41 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:42 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:54 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 22:55:56 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:12 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:56:21 Windows which were open at time of error: |
| Wed Mar 20 22:56:21 End-of-list |
| Wed Mar 20 22:57:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:30 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 22:57:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 22:57:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:10 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:01:10 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:13 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:01:14 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:01:16 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:01:17 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Wed Mar 20 23:05:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:12:26 No new connections routed. |
| Wed Mar 20 23:12:26 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:12:27 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:12:27 No new connections routed. |
| Wed Mar 20 23:12:27 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:13:48 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:13:48 No new connections routed. |
| Wed Mar 20 23:13:48 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:29 No new connections routed. |
| Wed Mar 20 23:15:29 Total is now 0 out of 17 (0%). |
| Wed Mar 20 23:15:30 Routed 17 connections in 0 seconds. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:15:30 No new connections routed. |
| Wed Mar 20 23:15:30 Total is now 17 out of 17 (100%). |
| Wed Mar 20 23:18:33 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:18:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:18:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:22:11 No new connections routed. |
| Wed Mar 20 23:22:11 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:43 No new connections routed. |
| Wed Mar 20 23:24:43 Total is now 0 out of 18 (0%). |
| Wed Mar 20 23:24:44 Routed 18 connections in 0 seconds. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:24:44 No new connections routed. |
| Wed Mar 20 23:24:44 Total is now 18 out of 18 (100%). |
| Wed Mar 20 23:44:52 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 UserDiv from Layout.INI for AutoECO: 60 |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Footprint coords will be rounded to nearest base unit. |
| Wed Mar 20 23:44:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:44:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Wed Mar 20 23:48:34 Routed 2 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 2 out of 29 (6%). |
| Wed Mar 20 23:48:34 Routed 27 connections in 0 seconds. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:48:34 No new connections routed. |
| Wed Mar 20 23:48:34 Total is now 29 out of 29 (100%). |
| Wed Mar 20 23:50:26 Saved as file ~undo.max |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 UserDiv from Layout.INI for AutoECO: 60 |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Footprint coords will be rounded to nearest base unit. |
| Thu Mar 21 00:01:11 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:01:11 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 00:07:07 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:14 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Thu Mar 21 03:35:20 Saved as file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:35 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:15:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:15:36 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:36 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:15:52 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:15:56 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:15:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:15:59 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:00 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:16:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:16:06 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:07 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:16:08 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:16:10 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:10 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:16:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:48 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:18:48 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 02:18:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:55 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:18:58 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:18:58 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 02:19:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 02:19:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:06 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:16:08 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:08 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:16:16 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:09 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:10 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:20:12 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:12 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:20:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:34 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:34 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:22:35 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:22:35 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:22:35 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:04 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:04 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:25:05 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:25:05 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:25:05 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 04:28:23 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 04:28:23 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 04:28:23 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:29 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:22:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:22:30 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:22:30 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:22:30 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:35:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:35:26 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:35:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:35:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:36:27 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:36:29 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:29 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:36:30 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:25 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 05:37:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 05:37:26 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 05:37:26 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:28 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:26:30 Windows which were open at time of error: |
| Sat Mar 23 06:26:30 ActiveWindow: &Components |
| Sat Mar 23 06:26:30 Icon: &Nets |
| Sat Mar 23 06:26:30 Icon: Post Proces&s |
| Sat Mar 23 06:26:30 Icon: &Route |
| Sat Mar 23 06:26:30 End-of-list |
| Sat Mar 23 06:34:32 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:33 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:33 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:36 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:50 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\data\template.imp |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:50 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:52 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 06:34:53 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 06:34:53 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:34:53 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 06:42:32 No new connections routed. |
| Sat Mar 23 06:42:32 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:42:34 Routed 28 connections in 2 seconds. |
| Sat Mar 23 06:42:34 Total is now 28 out of 29 (96%). |
| Sat Mar 23 06:42:36 Routed 1 connections in 1 seconds. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:42:36 No new connections routed. |
| Sat Mar 23 06:42:36 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:43:55 No new connections routed. |
| Sat Mar 23 06:43:55 Total is now 0 out of 29 (0%). |
| Sat Mar 23 06:44:00 Routed 28 connections in 5 seconds. |
| Sat Mar 23 06:44:00 Total is now 27 out of 29 (93%). |
| Sat Mar 23 06:44:02 Routed 2 connections in 1 seconds. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:44:02 No new connections routed. |
| Sat Mar 23 06:44:02 Total is now 29 out of 29 (100%). |
| Sat Mar 23 06:45:00 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:47 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:47:48 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:47:48 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:24 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 17:54:24 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 17:54:25 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 17:54:25 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 UserDiv from Layout.INI for AutoECO: 60 |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\TRANZISTORY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\PADSTACK.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\METRIC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EMPTY.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\RC.LLB |
| Sat Mar 23 18:20:01 Loaded file C:\PROGRAM FILES\ORCADLITE\LAYOUT_PLUS\LIBRARY\EX_GUI.LLB |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Footprint coords will be rounded to nearest base unit. |
| Sat Mar 23 18:20:01 Saved as file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| Sat Mar 23 18:20:01 Loaded file D:\@KAKLIK\MOTOR\MOTOR BOARD.MAX |
| /schemata/Motory/zaloha/motor board.opj |
|---|
| 0,0 → 1,159 |
| (ExpressProject "motor board" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\motor board.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "0") |
| (EDIF_Netlist_File "MOTOR BOARD.EDN") |
| (EDIF_Allow_NonEDIF "FALSE") |
| (EDIF_Pin_Names "FALSE") |
| (EDIF_No_Library "FALSE") |
| (EDIF_Net_Props "FALSE") |
| (EDIF_Part_Props "FALSE") |
| (EDIF_Pin_Props "FALSE") |
| (EDIF_Designators "FALSE") |
| (EDIF_Part_Value "{Value}") |
| (EDIF_PCB_Footprint "{PCB Footprint}") |
| (EDIF_View_Output "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\NOVÁ SLOKA\MOTOR BOARD.DRC") |
| (LAYOUT_Netlist_File "MOTOR BOARD.MNL") |
| (LAYOUT_PCB_Footprint "{PCB Footprint}") |
| (FALSE) |
| (LAYOUT_Units "1") |
| (TRUE) |
| (FALSE) |
| (RootChangedForceReNetlist "x") |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (FALSE) |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "MOTOR BOARD.NET") |
| (OTHER_Netlist_File2 "MOTOR BOARD.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "accel.dll") |
| (OTHER_PCB_Footprint "{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EXPORT_Scope "0") |
| (EXPORT_Contents "-1") |
| (EXPORT_File_Name "D:\@KAKLIK\MOTOR\MOTOR BOARD.EXP")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library") |
| (PartMRUSelector |
| (JUMPER16 |
| (FullPartName "JUMPER16.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER5 |
| (FullPartName "JUMPER5.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (JUMPER4 |
| (FullPartName "JUMPER4.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (GND_POWER |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (JUMPER11 |
| (FullPartName "JUMPER11.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (7404 |
| (FullPartName "7404.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (0 |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\PSPICE\SOURCE.OLB") |
| (DeviceIndex "0")) |
| (CON1 |
| (FullPartName "CON1.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (2N1069 |
| (FullPartName "2N1069.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (2N2903 |
| (FullPartName "2N2903.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7406 |
| (FullPartName "7406.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (2N1132A |
| (FullPartName "2N1132A.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (7403 |
| (FullPartName "7403.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (JUMPER10 |
| (FullPartName "JUMPER10.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR AC" |
| (FullPartName "MOTOR AC.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR STEPPER" |
| (FullPartName "MOTOR STEPPER.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| (TC4077B |
| (FullPartName "TC4077B.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\GATE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/Motory/zaloha/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Router_06_21_21_25.bre |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/Router_06_21_21_45.bre |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/RoutingReport.txt |
|---|
| 0,0 → 1,1373 |
| PADS Router 2005 SPac1, Routing report |
| Design: D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Wed Jun 21 21:08:06 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+39) |
| Vias: 0(+0) |
| Trace length: 18330(+18330) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:07 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+39) |
| Vias: 0(+0) |
| Trace length: 18456(+18456) Mils |
| Duration 00:00:02(+00:00:02) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18330(-126) Mils |
| Rerouted: 0 |
| Duration 00:00:07(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:08:28 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18239(-91) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18330(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18239(-91) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:08:58 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 18197(+1112) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 18286(+1201) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18197(-89) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:09:09 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18197(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18197(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18197(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:10:07 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+7) |
| Vias: 0(+0) |
| Trace length: 17634(+3285) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+7) |
| Vias: 0(+0) |
| Trace length: 17653(+3304) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17634(-19) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:11:11 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+9) |
| Vias: 0(+0) |
| Trace length: 17264(+3659) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+9) |
| Vias: 0(+0) |
| Trace length: 17347(+3742) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17264(-83) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:11:18 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17297(+33) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17264(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17297(+33) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:11:41 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 38(+3) |
| Vias: 0(+0) |
| Trace length: 16203(+3778) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:08 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 38(+3) |
| Vias: 0(+0) |
| Trace length: 16222(+3797) Mils |
| Duration 00:00:02(+00:00:02) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16203(-19) Mils |
| Rerouted: 0 |
| Duration 00:00:08(+00:00:06) |
| ============================================================================================== |
| Wed Jun 21 21:11:50 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 38(+0) |
| Vias: 0(+0) |
| Trace length: 16203(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 38(+0) |
| Vias: 0(+0) |
| Trace length: 16203(+0) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16203(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:12:24 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+1) |
| Vias: 0(+0) |
| Trace length: 18010(+1245) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:16 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+1) |
| Vias: 0(+0) |
| Trace length: 18165(+1400) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18010(-155) Mils |
| Rerouted: 0 |
| Duration 00:00:16(+00:00:15) |
| ============================================================================================== |
| Wed Jun 21 21:12:54 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17141(-129) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:07 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17270(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17141(-129) Mils |
| Rerouted: 0 |
| Duration 00:00:07(+00:00:07) |
| ============================================================================================== |
| Wed Jun 21 21:13:26 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 38(+0) |
| Vias: 0(+0) |
| Trace length: 17100(+1) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 38(+0) |
| Vias: 0(+0) |
| Trace length: 17099(+0) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17100(+1) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:03) |
| ============================================================================================== |
| Wed Jun 21 21:13:49 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 38(+0) |
| Vias: 0(+0) |
| Trace length: 17114(-81) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 38(+0) |
| Vias: 0(+0) |
| Trace length: 17195(+0) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17114(-81) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:03) |
| ============================================================================================== |
| Wed Jun 21 21:14:22 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+1) |
| Vias: 0(+0) |
| Trace length: 18523(+1285) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+1) |
| Vias: 0(+0) |
| Trace length: 19299(+2061) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18523(-776) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:14:28 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18523(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18523(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18523(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:03) |
| ============================================================================================== |
| Wed Jun 21 21:15:23 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+11) |
| Vias: 0(+0) |
| Trace length: 16987(+4341) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+11) |
| Vias: 0(+0) |
| Trace length: 17038(+4392) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16987(-51) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:15:30 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:15:37 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:15:44 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16987(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:26:09 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 17122(+1362) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 17122(+1362) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17122(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:26:16 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17122(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17122(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17122(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:26:35 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+2) |
| Vias: 0(+0) |
| Trace length: 17143(+747) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+2) |
| Vias: 0(+0) |
| Trace length: 17158(+762) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17143(-15) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:26:42 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17143(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17143(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17143(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:28:12 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+6) |
| Vias: 0(+0) |
| Trace length: 18223(+3788) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+6) |
| Vias: 0(+0) |
| Trace length: 18232(+3797) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18223(-9) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:02) |
| ============================================================================================== |
| Wed Jun 21 21:28:17 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18027(-196) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18223(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18027(-196) Mils |
| Rerouted: 0 |
| Duration 00:00:03(+00:00:03) |
| ============================================================================================== |
| Wed Jun 21 21:28:47 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+39) |
| Vias: 0(+0) |
| Trace length: 18066(+18066) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:08 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+39) |
| Vias: 0(+0) |
| Trace length: 18165(+18165) Mils |
| Duration 00:00:03(+00:00:02) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18066(-99) Mils |
| Rerouted: 0 |
| Duration 00:00:08(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:35:48 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+3) |
| Vias: 0(+0) |
| Trace length: 17526(+1871) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:08 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+3) |
| Vias: 0(+0) |
| Trace length: 17492(+1837) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17526(+34) Mils |
| Rerouted: 0 |
| Duration 00:00:08(+00:00:07) |
| ============================================================================================== |
| Wed Jun 21 21:36:04 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17526(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17526(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17526(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:06) |
| ============================================================================================== |
| Wed Jun 21 21:37:07 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 18099(+2886) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:04 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 18403(+3190) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18099(-304) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:03) |
| ============================================================================================== |
| Wed Jun 21 21:38:08 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+7) |
| Vias: 0(+0) |
| Trace length: 17550(+2325) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:07 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+7) |
| Vias: 0(+0) |
| Trace length: 17712(+2487) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17550(-162) Mils |
| Rerouted: 0 |
| Duration 00:00:07(+00:00:06) |
| ============================================================================================== |
| Wed Jun 21 21:38:15 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17550(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17550(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17550(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:06) |
| ============================================================================================== |
| Wed Jun 21 21:39:28 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17550(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17550(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17550(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:06) |
| ============================================================================================== |
| Wed Jun 21 21:41:21 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+10) |
| Vias: 0(+0) |
| Trace length: 17178(+2753) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+10) |
| Vias: 0(+0) |
| Trace length: 17250(+2825) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17178(-72) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:06) |
| ============================================================================================== |
| Wed Jun 21 21:41:31 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17178(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 17178(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17178(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:42:14 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+2) |
| Vias: 0(+0) |
| Trace length: 17146(+430) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+2) |
| Vias: 0(+0) |
| Trace length: 17146(+430) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 17146(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:42:25 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+10) |
| Vias: 0(+0) |
| Trace length: 16965(+2836) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:03 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+10) |
| Vias: 0(+0) |
| Trace length: 16980(+2851) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16965(-15) Mils |
| Rerouted: 0 |
| Duration 00:00:02(+00:00:01) |
| ============================================================================================== |
| Wed Jun 21 21:42:34 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16965(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 16965(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 16965(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:04(+00:00:04) |
| ============================================================================================== |
| Wed Jun 21 21:42:58 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 18810(+5337) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:07 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+4) |
| Vias: 0(+0) |
| Trace length: 18862(+5389) Mils |
| Duration 00:00:01(+00:00:01) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18810(-52) Mils |
| Rerouted: 0 |
| Duration 00:00:07(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:43:08 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18810(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18810(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18810(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:44:18 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+3) |
| Vias: 0(+0) |
| Trace length: 18825(+1125) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+3) |
| Vias: 0(+0) |
| Trace length: 18825(+1125) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18825(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:45:11 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18825(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18825(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18825(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:46:32 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+5) |
| Vias: 0(+0) |
| Trace length: 18804(+1048) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:06 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+5) |
| Vias: 0(+0) |
| Trace length: 18824(+1068) Mils |
| Duration 00:00:01(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18804(-20) Mils |
| Rerouted: 0 |
| Duration 00:00:06(+00:00:05) |
| ============================================================================================== |
| Wed Jun 21 21:47:06 2006 |
| Autorouting D:\KAKLIK\schemata\default_blz1.pcb |
| ============================================================================================== |
| Pre-routing analysis |
| Warning:Not enough vias for routing from the top to the bottom of the design. |
| To correct the problem, define additional vias or enable vias for routing using |
| the Via Biasing tab of the Design Properties dialog box. |
| ============================================================================================== |
| Passes Processed: Route, Optimize |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18804(+0) Mils |
| Test points: 0(+0) |
| Accessible nets: 0(+0) |
| Duration 00:00:05 |
| ============================================================================================== |
| Pass: 3 (Route) |
| Routed Connections: 39(+0) |
| Vias: 0(+0) |
| Trace length: 18804(+0) Mils |
| Duration 00:00:00(+00:00:00) |
| ============================================================================================== |
| Pass: 4 (Optimize) |
| Vias: 0(+0) |
| Trace length: 18804(+0) Mils |
| Rerouted: 0 |
| Duration 00:00:05(+00:00:05) |
| ============================================================================================== |
| /schemata/Session.log |
|---|
| 0,0 → 1,834 |
| `<000> |
| ----------------- |
| Loading PCB file 'D:\KAKLIK\schemata\default_blz1.pcb'... |
| PCB file loaded -- `DESIGN[D:\KAKLIK\schemata\default_blz1.pcb][D:\KAKLIK\schemata\default_blz1.pcb] -- version 2005.0 |
| Integrity Test in progress... |
| No database integrity problems found |
| ... Integrity test report saved -- `FILE[D:\KAKLIK\schemata\TestIntegrity.txt][D:\KAKLIK\schemata\TestIntegrity.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 39 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:02 (+00:00:02) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:07 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 7 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:06 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 9 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:04 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 3 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:02 (+00:00:02) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 16(-0) Inches Duration 00:00:08 (+00:00:06) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:08 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 16(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:01 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 1 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:16 (+00:00:15) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:16 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:01 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:07 (+00:00:07) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 3 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:02 (+00:00:02) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:02 (+00:00:00) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:02 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:04 (+00:00:03) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:00 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:04 (+00:00:03) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 38 of 39 (97.4%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Done> Unroutes 1 Routed 38 of 39 (97.4%) Vias 0 Duration 00:00:01 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 1 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(-1) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:04 (+00:00:03) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 11 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Saving PCB file 'D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb'... |
| PCB file saved -- `DESIGN[D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb][D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 37 of 39 (94.9%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 16(+0) Inches Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Done> Unroutes 2 Routed 37 of 39 (94.9%) Vias 0 Duration 00:00:00 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:05 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 6 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:04 (+00:00:02) |
| ----------------- |
| User stop> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:03 (+00:00:03) |
| ----------------- |
| User stop> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| Protect in progress... |
| ...Protect finished. |
| Unprotect in progress... |
| ...Unprotect finished. |
| Unroute in progress... |
| ...Unroute finished. |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 39 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:03 (+00:00:02) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:08 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:08 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 3 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:08 (+00:00:07) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:08 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:06 (+00:00:06) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 35 of 39 (89.7%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 15(+0) Inches Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Done> Unroutes 4 Routed 35 of 39 (89.7%) Vias 0 Duration 00:00:01 |
| ----------------- |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:04 (+00:00:03) |
| ----------------- |
| User stop> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:04 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 7 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(-0) Inches Duration 00:00:07 (+00:00:06) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:06 (+00:00:06) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 18(+0) Inches Duration 00:00:06 (+00:00:06) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 10 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:06 (+00:00:06) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:06 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 2 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:06 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| Unroute in progress... |
| ...Unroute finished. |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| Pre-routing analysis finished. |
| Route All Nets: Routed 10 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(-0) Inches Duration 00:00:02 (+00:00:01) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:03 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 17(+0) Inches Duration 00:00:04 (+00:00:04) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| Unroute in progress... |
| ...Unroute finished. |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 4 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:01) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(-0) Inches Duration 00:00:07 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:07 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 3 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 5 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:01 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(-0) Inches Duration 00:00:06 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:06 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Batch Router Statistics |
| Pre-routing analysis in progress... |
| `<001> |
| Not enough vias for routing from the top to the bottom of the design. To correct the problem, define additional vias or enable vias for routing using the Via Biasing tab of the Design Properties dialog box. |
| `<000> |
| Pre-routing analysis finished. |
| Route All Nets: Routed 0 Total 39 of 39 (100.0%) Vias 0 Duration 00:00:00 (+00:00:00) |
| ----------------- |
| Optimize All Nets: Vias 0(+0) Trace length 19(+0) Inches Duration 00:00:05 (+00:00:05) |
| ----------------- |
| Done> Unroutes 0 Routed 39 of 39 (100.0%) Vias 0 Duration 00:00:05 |
| ----------------- |
| Routing report -- `FILE[D:\KAKLIK\schemata\RoutingReport.txt][D:\KAKLIK\schemata\RoutingReport.txt] |
| ----------------- |
| Saving PCB file 'D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb'... |
| PCB file saved -- `DESIGN[D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb][D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\default_blz1.pcb] |
| /schemata/TestIntegrity.txt |
|---|
| 0,0 → 1,3 |
| PADS Router. Database Integrity Test results for <D:\KAKLIK\schemata\default_blz1.pcb> |
| No database integrity problems found. |
| /schemata/Untitled.eco |
|---|
| 0,0 → 1,24 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* old file: D:\KAKLIK\schemata\ecogtmp0.asc |
| *REMARK* new file: D:\KAKLIK\schemata\ecogtmp1.asc |
| *REMARK* created by ECOGEN (Version 6.1b) on 21.6.2006 20:43:55 |
| *DELPIN* |
| D1.A VCC |
| D1.C N03786 |
| Q1.C N03786 |
| *DELPART* |
| D1 LED |
| *PART* |
| C3 C |
| J1 SCW2 |
| J2 SCW2 |
| *NET* |
| *SIGNAL* GND |
| J1.1 C3.2 |
| *SIGNAL* N03786 |
| J2.2 Q1.C |
| *SIGNAL* VCC |
| C3.1 J2.1 J1.2 |
| *REMARK* Deleted pins: 3, Added pins: 7 |
| *END* |
| /schemata/ascii.err |
|---|
| 0,0 → 1,12 |
| Reading file -- D:\KAKLIK\@dokumenty\skola\SPSSE\E2B\praxe\lampickaLED\LAMPICKA.asc |
| *Unspecified or unsupported version of ASCII file |
| *PADS-PCB* |
| Loading <C0805> from library |
| Cannot create attribute with name <Description> |
| Warning: Attribute of type Description not allowed for specified object |
| Loading <C0805> from library |
| Cannot create attribute with name <Value> |
| Warning: Attribute of type Value not allowed for specified object |
| **INPUT WARNINGS FOUND** |
| /schemata/asciitmp.asc |
|---|
| 0,0 → 1,914 |
| !PADS-POWERPCB-V2005.0-MILS! DESIGN DATABASE ASCII FILE 1.0 |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION MILS |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 6 |
| VIA_TO_TRACK 6 |
| VIA_TO_VIA 6 |
| PAD_TO_TRACK 6 |
| PAD_TO_VIA 6 |
| PAD_TO_PAD 6 |
| SMD_TO_TRACK 6 |
| SMD_TO_VIA 6 |
| SMD_TO_PAD 6 |
| SMD_TO_SMD 6 |
| COPPER_TO_TRACK 6 |
| COPPER_TO_VIA 6 |
| COPPER_TO_PAD 6 |
| COPPER_TO_SMD 6 |
| TEXT_TO_TRACK 6 |
| TEXT_TO_VIA 6 |
| TEXT_TO_PAD 6 |
| TEXT_TO_SMD 6 |
| OUTLINE_TO_TRACK 6 |
| OUTLINE_TO_VIA 6 |
| OUTLINE_TO_PAD 6 |
| OUTLINE_TO_SMD 6 |
| OUTLINE_TO_COPPER 6 |
| DRILL_TO_TRACK 6 |
| DRILL_TO_VIA 6 |
| DRILL_TO_PAD 6 |
| DRILL_TO_SMD 6 |
| DRILL_TO_COPPER 6 |
| SAME_NET_SMD_TO_VIA 6 |
| SAME_NET_SMD_TO_CRN 6 |
| SAME_NET_VIA_TO_VIA 6 |
| SAME_NET_PAD_TO_CRN 6 |
| MIN_TRACK_WIDTH 12 |
| REC_TRACK_WIDTH 12 |
| MAX_TRACK_WIDTH 12 |
| DRILL_TO_DRILL 6 |
| BODY_TO_BODY 6 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 50000 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 1000 |
| PARALLEL_GAP 200 |
| TANDEM_LENGTH 1000 |
| TANDEM_GAP 200 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 200 |
| MATCH_LENGTH_TOLERANCE 200 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 1 |
| VALID_LAYER 2 |
| VALID_VIA_TYPE STANDARDVIA |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 2000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 250.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 250.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 250.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| PCB DEFAULT |
| { |
| Rules.ViaAtSMD No |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Length.Maximum 250.00mil |
| Rules.Fanout.Length.Unlimited Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.ViaAtSMD.FitInside Yes |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/backup.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/default_blz1.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/eco.err |
|---|
| 0,0 → 1,9 |
| ** ECO In Report ** |
| Wed Jun 21 20:44:48 2006 |
| Input File : D:\KAKLIK\schemata\Untitled.eco |
| Current Job : default_blz.pcb |
| No errors found |
| /schemata/ecogtmp0.asc |
|---|
| 0,0 → 1,4647 |
| !PADS-POWERPCB-V2005.0-METRIC! DESIGN DATABASE ASCII FILE 1.0 |
| *PCB* GENERAL PARAMETERS OF THE PCB DESIGN |
| UNITS 1 2=Inches 1=Metric 0=Mils |
| USERGRID 2.54 2.54 Space between USER grid points |
| MAXIMUMLAYER 2 Maximum routing layer |
| WORKLEVEL 0 Level items will be created on |
| DISPLAYLEVEL 1 toggle for displaying working level last |
| LAYERPAIR 1 2 Layer pair used to route connection |
| VIAMODE T Type of via to use when routing between layers |
| LINEWIDTH 0.254 Width items will be created with |
| TEXTSIZE 2.54 0.254 Height and LineWidth text will be created with |
| JOBTIME 22 Amount of time spent on this PCB design |
| DOTGRID 25.4 25.4 Space between graphic dots |
| SCALE 12.202 Scale of window expansion |
| ORIGIN 254 254 User defined origin location |
| WINDOWCENTER 758.19 691.33296 Point defining the center of the window |
| BACKUPTIME 20 Number of minutes between database backups |
| REAL WIDTH 0.254 Widths greater then this are displayed real size |
| ALLSIGONOFF 1 All signal nets displayed on/off |
| REFNAMESIZE 2.54 0.254 Height and LineWidth used by part ref. names |
| HIGHLIGHT 0 Highlight nets flag |
| JOBNAME default_blz.pcb |
| CONCOL 1 |
| FBGCOL 1 0 |
| HATCHGRID 0.254 Copper pour hatching grid |
| TEARDROP 2713690 Teardrop tracks |
| THERLINEWID 0.381 Copper pour thermal line width |
| PSVIAGRID 0.635 0.635 Push & Shove Via Grid |
| PADFILLWID 0.254 CAM finger pad fill width |
| THERSMDWID 0.254 Copper pour thermal line width for SMD |
| MINHATAREA 0 Minimum hatch area |
| HATCHMODE 0 Hatch generation mode |
| HATCHDISP 0 Hatch display flag |
| DRILLHOLE 0.1524 Drill hole checking spacing |
| MITRERADII 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |
| MITRETYPE 1 Mitring type |
| HATCHRAD 0.500000 Hatch outline smoothing radius |
| MITREANG 180 180 180 180 180 180 90 |
| HATCHANG 0 Hatch angle |
| THERFLAGS 0 Copper pour thermal line flags |
| DRLOVERSIZE 0.0762 Drill oversize for plated holes |
| PLANERAD 0.000000 Plane outline smoothing radius |
| PLANEFLAGS OUTLINE THERMALS Y Y Y N N Y Y Y N N Y Y N Y Y N N N Plane and Test Points flags |
| COMPHEIGHT 0 Board Top Component Height Restriction |
| KPTHATCHGRID 2.54 Copper pour hatching grid |
| BOTCMPHEIGHT 0 Board Bottom Component Height Restriction |
| FANOUTGRID 0.635 0.635 Fanout grid |
| FANOUTLENGTH 6.35 Maximum fanout length |
| ROUTERFLAGS 83879441 Autorouter specific flags |
| VERIFYFLAGS 1861 Verify Design flags |
| FABCHKFLAGS 3967 Fabrication checks flags |
| ATMAXSIZE 0.0762 Acid Traps Maximum Size |
| ATMAXANGLE 161999820 Acid Traps Maximum Angle |
| SLMINCOPPER 0.0762 Slivers Minimum Copper |
| SLMINMASK 0.0762 Slivers Minimum Mask |
| STMINCLEAR 5 Starved Thermal Minimum Clearance |
| STMINSPOKES 4 Starved Thermal Minimum Spokes |
| TPMINWIDTH 0.0762 Minimum Trace Width |
| TPMINSIZE 0.0762 Mimimum Pad Size |
| SSMINGAP 0.0762 Silk Screen Over Pads Minimum Gap |
| SBMINGAP 0.0762 Solder Bridges Minimum Gap |
| SBLAYER 1 Solder Bridges Layer |
| ARPTOM 0.0762 Pad To Mask Annular Ring |
| ARPTOMLAYER 1 Pad To Mask Annular Ring Layer |
| ARDTOM 0.0762 Drill To Mask Annular Ring |
| ARDTOMLAYER 1 Drill To Mask Annular Ring Layer |
| ARDTOP 0.0762 Drill To Pad Annular Ring |
| ARDTOPLAYER 0 Drill To Pad Annular Ring Layer |
| PLNSEPGAP 0.1524 Plane separation gap |
| IDFSHAPELAY 0 IDF shapes layer |
| TEARDROPDATA 90 90 |
| *PARTDECAL* ITEMS |
| *REMARK* NAME UNITS ORIX ORIY PIECES TERMINALS STACKS TEXT LABELS |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* PIECETYPE CORNERS WIDTH LEVEL PINNUM |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| *REMARK* VISIBLE XLOC YLOC ORI LEVEL HEIGTH WIDTH MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* FONTSTYLE FONTFACE |
| *REMARK* T XLOC YLOC NMXLOC NMYLOC |
| *REMARK* PAD PIN STACKLINES |
| *REMARK* LEVEL SIZE SHAPE IDIA DRILL [PLATED] |
| *REMARK* LEVEL SIZE SHAPE FINORI FINLENGTH FINOFFSET DRILL [PLATED] |
| C0805 M 0 0 2 2 1 0 2 |
| OPEN 4 0.2032 0 |
| -0.4064 0.9652 |
| -1.7272 0.9652 |
| -1.7272 -0.9652 |
| -0.4064 -0.9652 |
| OPEN 4 0.2032 0 |
| 0.4064 0.9652 |
| 1.7272 0.9652 |
| 1.7272 -0.9652 |
| 0.4064 -0.9652 |
| VALUE -1.5494 3.8608 0.000 1 1.524 0.2032 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.4986 1.2446 0.000 1 1.524 0.2032 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-0.9652 0 -1.04 -0.4 |
| T0.9652 0 0.77 -0.39 |
| PAD 0 5 |
| -2 0.9906 RF 90.000 1.4224 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1.143 RF 90.000 1.5748 0 |
| 23 0.889 RF 90.000 1.3208 0 |
| C0603 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -12 30 |
| -58 30 |
| -58 -30 |
| -12 -30 |
| OPEN 4 8 0 |
| 12 30 |
| 58 30 |
| 58 -30 |
| 12 -30 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-30 0 -35 -15 |
| T30 0 22 -15 |
| PAD 0 5 |
| -2 35 RF 90.000 40 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 41 RF 90.000 46 0 |
| 23 31 RF 90.000 36 0 |
| C1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -34 45 |
| -90 45 |
| -90 -45 |
| -34 -45 |
| OPEN 4 8 0 |
| 34 45 |
| 90 45 |
| 90 -45 |
| 34 -45 |
| VALUE -59 61 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -66 172 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-57 0 -59.94 -15.75 |
| T57 0 49.31 -15.35 |
| PAD 0 5 |
| -2 43 RF 90.000 70 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 49 RF 90.000 76 0 |
| 23 37 RF 90.000 66 0 |
| CK025 M 0 0 2 2 1 0 2 |
| OPEN 2 0.2 0 |
| 1.25 1.5 |
| -1.25 1.5 |
| OPEN 2 0.2 0 |
| 1.25 -1.5 |
| -1.25 -1.5 |
| VALUE -1.5 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.7 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-1.254 0 -1.35 -0.4 |
| T1.254 0 1.05 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| CK050 M 0 0 2 2 1 0 2 |
| OPEN 2 0.2 0 |
| 2.6 1.5 |
| -2.6 1.5 |
| OPEN 2 0.2 0 |
| 2.6 -1.5 |
| -2.6 -1.5 |
| VALUE -1.5 4.7 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-2.504 0 -2.6 -0.4 |
| T2.504 0 2.3 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| C0805/1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| 32 45 |
| 90 45 |
| 90 -45 |
| 32 -45 |
| OPEN 4 8 0 |
| -32 45 |
| -90 45 |
| -90 -45 |
| -32 -45 |
| VALUE -53 62 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 169 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-45 0 -47.94 -15.75 |
| T45 0 37.31 -15.35 |
| PAD 0 5 |
| -2 70 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 76 S |
| 23 66 S |
| C1210 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -41 62 |
| -105 62 |
| -105 -62 |
| -41 -62 |
| OPEN 4 8 0 |
| 41 62 |
| 105 62 |
| 105 -62 |
| 41 -62 |
| VALUE -59 49 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -61 152 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-70 0 -72.94 -15.75 |
| T70 0 62.31 -15.35 |
| PAD 0 5 |
| -2 52 RF 90.000 105 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 58 RF 90.000 111 0 |
| 23 48 RF 90.000 101 0 |
| C1812 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -65 73 |
| -141 73 |
| -141 -73 |
| -65 -73 |
| OPEN 4 8 0 |
| 65 73 |
| 141 73 |
| 141 -73 |
| 65 -73 |
| VALUE -59 49 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -61 152 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 0 -102.94 -15.75 |
| T100 0 92.31 -15.35 |
| PAD 0 5 |
| -2 67 RF 90.000 130 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 73 RF 90.000 136 0 |
| 23 63 RF 90.000 126 0 |
| C2220 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -87 116 |
| -188 116 |
| -188 -116 |
| -87 -116 |
| OPEN 4 8 0 |
| 87 116 |
| 188 116 |
| 188 -116 |
| 87 -116 |
| VALUE -61 152 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59 49 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-135 0 -137.94 -15.75 |
| T135 0 127.31 -15.35 |
| PAD 0 5 |
| -2 87 RF 90.000 213 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 93 RF 90.000 219 0 |
| 23 83 RF 90.000 209 0 |
| ELYTA I 0 0 2 2 1 0 2 |
| OPEN 6 8 0 |
| -27 44 |
| -101.43 44 |
| -109.43 36 |
| -109.43 -36 |
| -101.43 -44 |
| -27 -44 |
| OPEN 4 8 0 |
| 27 44 |
| 107 44 |
| 107 -44 |
| 27 -44 |
| VALUE -55.6 63.8 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -52.24 173.48 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-63 0 -65.94 -15.75 |
| T63 0 55.31 -15.35 |
| PAD 0 5 |
| -2 65 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 71 S |
| 23 61 S |
| ELYTB I 0 0 2 2 1 0 2 |
| OPEN 6 8 0 |
| -35 62 |
| -95 62 |
| -103 54 |
| -103 -54 |
| -95 -62 |
| -35 -62 |
| OPEN 4 8 0 |
| 35 62 |
| 103 62 |
| 103 -62 |
| 35 -62 |
| VALUE -59.69 265.98 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.69 157.89 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-65 0 -67.94 -15.75 |
| T65 0 57.31 -15.35 |
| PAD 0 5 |
| -2 55 RF 90.000 100 0 0 |
| -1 0 R |
| 0 0 R |
| 21 61 RF 90.000 106 0 |
| 23 51 RF 90.000 96 0 |
| ELYTC I 0 0 2 2 1 0 2 |
| OPEN 6 8 0 |
| -55 70 |
| -145 70 |
| -153 62.41 |
| -153 -61.91 |
| -145 -70 |
| -55 -70 |
| OPEN 4 8 0 |
| 55 70 |
| 153 70 |
| 153 -70 |
| 55 -70 |
| VALUE -64.97 198.8 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -61.55 88.37 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-100 0 -102.94 -15.75 |
| T100 0 92.31 -15.35 |
| PAD 0 5 |
| -2 85 RF 90.000 100 0 0 |
| -1 0 R |
| 0 0 R |
| 21 91 RF 90.000 106 0 |
| 23 81 RF 90.000 96 0 |
| ELYTD I 0 0 2 2 1 1 2 |
| OPEN 6 8 0 |
| -80 92 |
| -170 92 |
| -180 82 |
| -180 -82 |
| -170 -92 |
| -78 -92 |
| OPEN 4 8 0 |
| 80 92 |
| 180 92 |
| 180 -92 |
| 80 -92 |
| -136.59 -15.94 0.000 26 60 8 N LEFT DOWN 0 |
| Regular <PADS Stroke Font> |
| K |
| VALUE -55.71 114.39 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -56.97 228.14 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-126 0 -128.94 -15.75 |
| T126 0 118.31 -15.35 |
| PAD 0 5 |
| -2 85 RF 90.000 120 0 0 |
| -1 0 R |
| 0 0 R |
| 21 91 RF 90.000 126 0 |
| 23 81 RF 90.000 116 0 |
| CE020X5 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 105 0 |
| -105 0 |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-40 0 -43.78 -15.75 |
| T40 0 31.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE025X6 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 130 0 |
| -130 0 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-50 0 -53.78 -15.75 |
| T50 0 41.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE035X8 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 170 0 |
| -170 0 |
| VALUE -48.01 295.22 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -49.23 191.31 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-69 0 -72.78 -15.75 |
| T69 0 60.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE050X10 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 210 0 |
| -210 0 |
| VALUE -52.12 339.78 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -49.7 229.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-100 0 -103.78 -15.75 |
| T100 0 91.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE050X13 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 270 0 |
| -270 0 |
| VALUE -50 430 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -50 310 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-100 0 -103.78 -15.75 |
| T100 0 91.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE075X16 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 325 0 |
| -325 0 |
| VALUE -60 460 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -64.3 354.09 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-150 0 -153.78 -15.75 |
| T150 0 141.97 -11.81 |
| PAD 0 5 |
| -2 80 R 45 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PAD 1 5 |
| -2 80 S 40 |
| -1 80 S |
| 0 80 S |
| 21 86 S |
| 28 86 S |
| CE075X18 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 367 0 |
| -367 0 |
| VALUE -58.64 391.11 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -60 500 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-150 0 -153.78 -15.75 |
| T150 0 141.97 -11.81 |
| PAD 0 5 |
| -2 80 R 40 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PAD 1 5 |
| -2 80 S 40 |
| -1 80 S |
| 0 80 S |
| 21 86 S |
| 28 86 S |
| CE020X5/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -105 -60 |
| 101 -60 |
| 101 -487 |
| -105 -487 |
| -105 -60 |
| OPEN 2 8 0 |
| -37 -40 |
| -37 -60 |
| OPEN 2 8 0 |
| 40 -40 |
| 40 -60 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-40 0 -43.78 -15.75 |
| T40 0 31.97 -11.81 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| PAD 1 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| CE025X6/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -129 -60 |
| 129 -60 |
| 129 -485 |
| -129 -485 |
| -129 -60 |
| OPEN 3 8 0 |
| -48 -40 |
| -49 -60 |
| -51 -59 |
| OPEN 2 8 0 |
| 50 -40 |
| 50 -60 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-50 0 -53.78 -15.75 |
| T50 0 41.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE035X8/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -168 -60 |
| 169 -60 |
| 169 -487 |
| -168 -487 |
| -168 -60 |
| OPEN 2 8 0 |
| -68 -40 |
| -68 -60 |
| OPEN 2 8 0 |
| 71 -40 |
| 71 -60 |
| VALUE -48.01 295.22 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -49.23 191.31 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-69 0 -72.78 -15.75 |
| T69 0 60.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE050X10/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -210 -70 |
| 208 -70 |
| 208 -682 |
| -210 -682 |
| -210 -70 |
| OPEN 2 8 0 |
| -100 -40 |
| -100 -70 |
| OPEN 2 8 0 |
| 100 -40 |
| 100 -70 |
| VALUE -49.7 229.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -52.12 339.78 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 0 -103.78 -15.75 |
| T100 0 91.97 -11.81 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| PAD 1 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| LED0603 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -12 30 |
| -58 30 |
| -58 -30 |
| -12 -30 |
| OPEN 4 8 0 |
| 12 30 |
| 58 30 |
| 58 -30 |
| 12 -30 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-30 0 -35 -15 |
| T30 0 22 -15 |
| PAD 0 5 |
| -2 35 RF 90.000 40 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 41 RF 90.000 46 0 |
| 23 31 RF 90.000 36 0 |
| LED0805-1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| 32 45 |
| 90 45 |
| 90 -45 |
| 32 -45 |
| OPEN 6 8 0 |
| -32 45 |
| -82 45 |
| -90 37 |
| -90 -37 |
| -82 -45 |
| -32 -45 |
| VALUE -53 62 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 169 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-45 0 -47.94 -15.75 |
| T45 0 37.31 -15.35 |
| PAD 0 5 |
| -2 70 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 76 S |
| 23 66 S |
| LED0805 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -16 35 |
| -68 35 |
| -68 -35 |
| -16 -35 |
| OPEN 4 8 0 |
| 16 35 |
| 68 35 |
| 68 -35 |
| 16 -35 |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-38 0 -35 -15 |
| T38 0 38.89 -15 |
| PAD 0 5 |
| -2 39 RF 90.000 51 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 45 RF 90.000 57 0 |
| 23 35 RF 90.000 47 0 |
| LED1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -34 45 |
| -90 45 |
| -90 -45 |
| -34 -45 |
| OPEN 4 8 0 |
| 34 45 |
| 90 45 |
| 90 -45 |
| 34 -45 |
| VALUE -59 61 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -66 172 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-57 0 -59.94 -15.75 |
| T57 0 49.31 -15.35 |
| PAD 0 5 |
| -2 43 RF 90.000 70 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 49 RF 90.000 76 0 |
| 23 37 RF 90.000 66 0 |
| LED1.8 I 0 0 2 2 2 0 2 |
| OPEN 2 8 0 |
| -36 36 |
| 36 36 |
| OPEN 2 8 0 |
| -36 -36 |
| 36 -36 |
| VALUE -72 180 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -72 72 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-49.37 0 -53.15 -15.75 |
| T49.37 0 41.34 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 R |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| LED3 I 0 0 2 2 2 0 2 |
| OPEN 2 8 0 |
| -70 40 1495 -1190 -81.25 -82.5 81.25 80 |
| 70 40 |
| OPEN 2 8 0 |
| -70 -40 2097 1205 -80.62 -80.62 80.62 80.62 |
| 70 -40 |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-49.37 0 -53.15 -15.75 |
| T49.37 0 41.34 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 R |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| LED10 I 0 0 2 2 2 0 2 |
| CIRCLE 2 8 0 |
| 197 0 |
| -197 0 |
| OPEN 2 8 0 |
| -144 135 |
| -144 -135 |
| VALUE -60 315 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -60 210 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-49.37 0 -53.15 -15.75 |
| T49.37 0 41.34 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 R |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| LED5 I 0 0 2 2 2 0 2 |
| CIRCLE 2 8 0 |
| 120 0 |
| -120 0 |
| OPEN 2 8 0 |
| -92 75 |
| -92 -75 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-49.37 0 -53.15 -15.75 |
| T49.37 0 41.34 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 R |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| ARK210/2 M 2.54 0 1 2 2 0 2 |
| CLOSED 5 0.2 0 |
| -5 4.5 |
| 5 4.5 |
| 5 -4.5 |
| -5 -4.5 |
| -5 4.5 |
| VALUE -1.5 7.5 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 5 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-2.54 0 -2.6924 -0.3302 |
| T2.54 0 2.54 0 |
| PAD 0 5 |
| -2 1.905 R 1.016 |
| -1 1.905 R |
| 0 1.905 R |
| 21 2.0574 R |
| 28 2.0574 R |
| PAD 1 5 |
| -2 1.905 S 1.016 |
| -1 1.905 S |
| 0 1.905 S |
| 21 2.0574 S |
| 28 2.0574 S |
| TO92 M 0 0 2 4 2 0 2 |
| OPEN 3 0.2 0 |
| 0.8 2.5 900 1800 -1.7 -2.5 3.3 2.5 |
| 0.8 -2.5 |
| 1.8034 -2.4892 |
| OPEN 3 0.2 0 |
| 1.8 -2.5 |
| 1.8 2.5 |
| 0.7874 2.5 |
| VALUE -0.3048 5.0038 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -0.3556 4.5974 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T0.635 -1.27 0.4064 -1.6002 |
| T0.635 1.27 0.4826 0.9144 |
| T-0.635 0 -0.8382 -0.3302 |
| T1.143 -0.0254 1.143 -0.0254 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO92/B M 0 0 2 4 2 0 2 |
| OPEN 2 0.1999 0 |
| 1 -3.9 2700 -1800 -2.9 -3.9 4.9 3.9 |
| 1 3.9 |
| OPEN 4 0.1999 0 |
| 1 3.9 |
| 2.5 3.9 |
| 2.5 -3.9 |
| 1 -3.9 |
| VALUE -2.93494 -1.71825 90.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -5.87759 -1.97099 90.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T1.27 -2.54 1.0414 -2.8702 |
| T1.27 2.54 1.1176 2.1844 |
| T-1.27 0 -1.4732 -0.3302 |
| T1.0668 0 1.0668 0 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO92/BSMD M 0 0 4 4 2 0 2 |
| CLOSED 5 0.2 0 |
| 4.5 2.3 |
| 9.2 2.3 |
| 9.2 -2.3 |
| 4.5 -2.3 |
| 4.5 2.3 |
| OPEN 2 0.2 0 |
| 1.5 1 |
| 4.5 1 |
| OPEN 2 0.2 0 |
| 1.5 -1 |
| 4.5 -1 |
| OPEN 2 0.2 0 |
| 1.5 0 |
| 4.5 0 |
| VALUE -1.4478 5.4102 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.3716 5.207 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T0 -1.1 -0.2286 -1.4302 |
| T0 1.1 -0.1524 0.7444 |
| T0 0 -0.2032 -0.3302 |
| T-1.2954 -0.1016 -1.2954 -0.1016 |
| PAD 0 5 |
| -2 0.8128 RF 0.000 2.032 0 0 |
| -1 0 R |
| 0 0 R |
| 21 0.9652 RF 0.000 2.1844 0 |
| 23 0.7112 RF 0.000 1.9304 0 |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO92/L M 0 0 2 4 2 0 2 |
| OPEN 2 0.2 0 |
| -0.95792 2.44311 1200 1200 -2.4013 -2.94364 3.37221 2.82986 |
| -0.95792 -2.55689 |
| OPEN 2 0.2 0 |
| 1.016 2.54 |
| 1.016 -2.54 |
| VALUE -1.4478 5.4102 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.3716 5.207 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T0 -2.54 -0.2286 -2.8702 |
| T0 2.54 -0.1524 2.1844 |
| T0 0 -0.2032 -0.3302 |
| T-1.2954 -0.1016 -1.2954 -0.1016 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO39 M 0 0 3 4 2 0 2 |
| CIRCLE 2 0.2 0 |
| 3.5 0 |
| -5.7 0 |
| OPEN 2 0.2 0 |
| -2.3 -4.4 |
| -3.1 -4.1 |
| OPEN 4 0.2 0 |
| -4.2 -3.4 |
| -4.6 -3.8 |
| -5.1 -3.3 |
| -4.7 -2.9 |
| VALUE -1.6 8.1 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.6 5.2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-1.27 2.54 -1.435 2.17 |
| T-1.27 -2.54 -1.435 -2.97 |
| T1.27 0 1.066 -0.3 |
| T-3.9878 -0.4064 -3.9878 -0.4064 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| SOT37 I 0 0 1 4 2 0 2 |
| CIRCLE 2 8 0 |
| 100 0 |
| -100 0 |
| VALUE -53 121 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 228 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T145 1 145 1 |
| T0 -145 0 -145 |
| T-145 0 -145 0 |
| T0 84 0 84 |
| PAD 0 5 |
| -2 80 R 45 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| SOT37/SMD I 0 0 1 4 3 0 2 |
| CIRCLE 2 8 0 |
| 100 0 |
| -100 0 |
| VALUE -53 121 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 228 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T185 0 185 0 |
| T0 -185 0 -185 |
| T-185 0 -185 0 |
| T16 106 16 106 |
| PAD 0 5 |
| -2 60 RF 0.000 150 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 66 RF 0.000 156 0 |
| 23 56 RF 0.000 146 0 |
| PAD 2 5 |
| -2 60 RF 90.000 150 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 66 RF 90.000 156 0 |
| 23 56 RF 90.000 146 0 |
| PAD 4 3 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| R0805 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -16 35 |
| -68 35 |
| -68 -35 |
| -16 -35 |
| OPEN 4 8 0 |
| 16 35 |
| 68 35 |
| 68 -35 |
| 16 -35 |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-38 0 -35 -15 |
| T38 0 38.89 -15 |
| PAD 0 5 |
| -2 39 RF 90.000 51 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 45 RF 90.000 57 0 |
| 23 35 RF 90.000 47 0 |
| R0603 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -12 30 |
| -58 30 |
| -58 -30 |
| -12 -30 |
| OPEN 4 8 0 |
| 12 30 |
| 58 30 |
| 58 -30 |
| 12 -30 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-30 0 -35 -15 |
| T30 0 22 -15 |
| PAD 0 5 |
| -2 35 RF 90.000 40 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 41 RF 90.000 46 0 |
| 23 31 RF 90.000 36 0 |
| R1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -34 45 |
| -90 45 |
| -90 -45 |
| -34 -45 |
| OPEN 4 8 0 |
| 34 45 |
| 90 45 |
| 90 -45 |
| 34 -45 |
| VALUE -59 61 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -66 172 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-57 0 -59.94 -15.75 |
| T57 0 49.31 -15.35 |
| PAD 0 5 |
| -2 43 RF 90.000 70 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 49 RF 90.000 76 0 |
| 23 37 RF 90.000 66 0 |
| RS025 I 0 0 2 2 1 0 2 |
| CIRCLE 2 8 0 |
| 12.99 0 |
| -112.99 0 |
| OPEN 2 8 0 |
| -15 0 |
| 15 0 |
| VALUE -59.06 70.87 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 173.23 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-50 0 -53.94 -15.75 |
| T50 0 42.13 -11.81 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| RL090 M 0 0 1 2 1 0 2 |
| CLOSED 5 0.2 0 |
| -3.5 1.5 |
| 3.5 1.5 |
| 3.5 -1.5 |
| -3.5 -1.5 |
| -3.5 1.5 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-4.445 0 -4.545 -0.4 |
| T4.445 0 4.245 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| RL140 M 0 0 1 2 1 0 2 |
| CLOSED 5 0.2 0 |
| -6 2.3 |
| 6 2.3 |
| 6 -2.3 |
| -6 -2.3 |
| -6 2.3 |
| VALUE -1.2 2.7 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.3 5.4 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-6.985 0 -7.085 -0.4 |
| T6.985 0 6.785 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| RS040 M 0 0 2 2 1 0 2 |
| CIRCLE 2 0.2 0 |
| 0.595 0 |
| -4.405 0 |
| OPEN 2 0.2 0 |
| -1.016 0 |
| 1.016 0 |
| VALUE -0.5 2.5 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -0.6 5.2 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-1.905 0 -2.005 -0.4 |
| T1.905 0 1.705 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| R1812 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -50 80 |
| -128 80 |
| -128 -80 |
| -50 -80 |
| OPEN 4 8 0 |
| 50 80 |
| 128 80 |
| 128 -80 |
| 50 -80 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57 165 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-93 0 -90 -15 |
| T93 0 93.89 -15 |
| PAD 0 5 |
| -2 50 RF 90.000 140 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 55 RF 90.000 145 0 |
| 23 45 RF 90.000 136 0 |
| PUSH050X050SMD I 0 0 2 4 1 0 2 |
| CLOSED 5 8 0 |
| -90 113 |
| 90 113 |
| 90 -113 |
| -90 -113 |
| -90 113 |
| CIRCLE 2 8 0 |
| 55 0 |
| -55 0 |
| VALUE -39 220 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -39 220 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-150 85 -150 85 |
| T-150 -85 -150 -85 |
| T150 -85 150 -85 |
| T150 85 150 85 |
| PAD 0 5 |
| -2 90 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 96 S |
| 23 84 S |
| PUSH120 I 0 0 3 4 1 0 2 |
| CIRCLE 2 8 0 |
| 180 0 |
| -180 0 |
| OPEN 2 8 0 |
| -225 100 1565 -3129 -245.83 -250.44 255.04 250.44 |
| -225 -100 |
| OPEN 2 8 0 |
| -225 100 |
| -225 -100 |
| VALUE 0 0 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE 0 0 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 100 -100 100 |
| T-100 -100 -100 -100 |
| T100 -100 100 -100 |
| T100 100 100 100 |
| PAD 0 5 |
| -2 80 R 44 |
| -1 60 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PUSH120SQ I 0 0 3 4 1 0 2 |
| OPEN 2 8 0 |
| -225 100 1565 -3129 -245.83 -250.44 255.04 250.44 |
| -225 -100 |
| OPEN 2 8 0 |
| -225 100 |
| -225 -100 |
| CLOSED 5 8 0 |
| -149.61 -149.61 |
| 149.61 -149.61 |
| 149.61 149.61 |
| -149.61 149.61 |
| -149.61 -149.61 |
| VALUE 0 0 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE 0 0 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 100 -100 100 |
| T-100 -100 -100 -100 |
| T100 -100 100 -100 |
| T100 100 100 100 |
| PAD 0 5 |
| -2 80 R 44 |
| -1 60 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| P-B1727 I 0 0 6 4 1 0 2 |
| CLOSED 3 10 0 |
| -196.85 157.48 |
| -196.85 196.85 |
| -196.85 157.48 |
| OPEN 4 8 0 |
| -196.85 157.48 |
| -196.85 196.85 |
| 196.85 196.85 |
| 196.85 157.48 |
| OPEN 2 8 0 |
| 196.85 39.37 |
| 196.85 -39.37 |
| OPEN 4 8 0 |
| 196.85 -157.48 |
| 196.85 -196.85 |
| -196.85 -196.85 |
| -196.85 -157.48 |
| OPEN 2 8 0 |
| -196.85 -39.37 |
| -196.85 39.37 |
| CIRCLE 2 8 0 |
| -111.36 0 |
| 111.36 0 |
| VALUE 0 0 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE 0 0 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-196.85 98.43 -196.85 98.43 |
| T-196.85 -98.43 -196.85 -98.43 |
| T196.85 -98.43 196.85 -98.43 |
| T196.85 98.43 196.85 98.43 |
| PAD 0 5 |
| -2 80 R 45 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 22 86 R |
| PUSH050X050 I 0 0 5 4 1 0 2 |
| CIRCLE 2 8 0 |
| 55 0 |
| -55 0 |
| OPEN 2 8 0 |
| -121 45 |
| -121 -45 |
| OPEN 2 8 0 |
| 121 45 |
| 121 -45 |
| OPEN 2 8 0 |
| 112 -121 |
| -112 -121 |
| OPEN 2 8 0 |
| 112 121 |
| -112 121 |
| VALUE -39 220 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -39 220 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-126 85 -126 85 |
| T-126 -85 -126 -85 |
| T126 -85 126 -85 |
| T126 85 126 85 |
| PAD 0 5 |
| -2 65 R 35 |
| -1 65 R |
| 0 65 R |
| 21 71 R |
| 28 71 R |
| DIP14_300 I 0 0 1 14 2 0 2 |
| CLOSED 9 8 0 |
| -100 350 |
| -30 350 |
| -30 290 |
| 30 290 |
| 30 350 |
| 100 350 |
| 100 -350 |
| -100 -350 |
| -100 350 |
| VALUE -59.06 436.88 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 436.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-150 300 -150 300 |
| T-150 200 -150 200 |
| T-150 100 -150 100 |
| T-150 0 -150 0 |
| T-150 -100 -150 -100 |
| T-150 -200 -150 -200 |
| T-150 -300 -150 -300 |
| T150 -300 150 -300 |
| T150 -200 150 -200 |
| T150 -100 150 -100 |
| T150 0 150 0 |
| T150 100 150 100 |
| T150 200 150 200 |
| T150 300 150 300 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 66 R |
| 28 66 R |
| PAD 1 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 66 S |
| 28 66 S |
| *PARTTYPE* ITEMS |
| *REMARK* NAME DECALNM UNITS TYPE GATES SIGPINS PINNMS FLAGS ECO |
| *REMARK* G/S SWAPTYPE PINS |
| *REMARK* PIN.SWAPTYPE.PINTYPE.FUNCNAME |
| *REMARK* SIGPIN PIN WIDTH SIGNAME |
| C C0805:C0603:C1206:CK025:CK050:C0805/1206:C1210:C1812:C2220 I CAP 1 0 0 0 Y |
| G 0 2 |
| 1.1.Z 2.1.Z |
| C-ELYT ELYTA:ELYTB:ELYTC:ELYTD:CE020X5:CE025X6:CE035X8:CE050X10:CE050X13:CE075X16:CE075X18:CE020X5/L:CE025X6/L:CE035X8/L:CE050X10/L I CAP 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| A C |
| LED LED0603:LED0805-1206:LED0805:LED1206:LED1.8:LED3:LED10:LED5 I DIO 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| C A |
| ARK210/2 ARK210/2 I CON 0 0 0 0 Y |
| T-CEB TO92:TO92/B:TO92/BSMD:TO92/L:TO39:SOT37:SOT37/SMD I TRX 0 0 4 0 Y |
| C E B 4 |
| R R0805:R0603:R1206:RS025:RL090:RL140:RS040:R1812 I RES 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| PB4PIN PUSH050X050SMD:PUSH120:PUSH120SQ:P-B1727:PUSH050X050 I SWI 0 0 0 0 Y |
| DIP14_300 DIP14_300 I DIP 0 0 0 0 Y |
| *PART* ITEMS |
| *REMARK* REFNM PTYPENM X Y ORI GLUE MIRROR ALT CLSTID CLSTATTR BROTHERID LABELS |
| *REMARK* .REUSE. INSTANCE RPART |
| *REMARK* VISIBLE XLOC YLOC ORI LEVEL HEIGTH WIDTH MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* FONTSTYLE FONTFACE |
| C1 C 512.34581 443.54334 90.000 U N 4 -1 0 -1 2 |
| VALUE -1.5 4.7 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| C2 C-ELYT 525.51482 437.70708 90.000 U N 4 -1 0 -1 2 |
| VALUE -1.4224 4.4196 0.000 1 1.524 0.2032 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.4224 7.112 0.000 1 1.524 0.2032 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| D1 LED 472.68913 449.9782 270.000 U N 7 -1 0 -1 2 |
| VALUE -1.4224 7.112 0.000 1 1.524 0.2032 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.4224 4.4196 0.000 1 1.524 0.2032 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| M1 ARK210/2 524.61693 448.78102 90.000 U N 0 -1 0 -1 2 |
| VALUE -1.5 7.5 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 5 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| R1 R 514.14158 429.77574 270.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R10 R 502.15394 448.42951 90.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R11 R 508.50644 448.5924 90.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R2 R 515.93736 448.33207 270.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R3 R 478.53569 438.98221 90.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R4 R 505.46 439.42 270.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R5 R 506.50954 432.17011 0.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R6 R 513.69264 437.55743 180.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R7 R 483.09645 439.14509 90.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R8 R 495.3 429.26 180.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R9 R 487.68 439.42 270.000 U N 4 -1 0 -1 2 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| SW1 PB4PIN 471.64159 437.70708 90.000 U N 4 -1 0 -1 2 |
| VALUE -0.9906 5.588 0.000 1 1.524 0.2032 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -0.9906 5.588 0.000 1 1.524 0.2032 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| U1 DIP14_300 495.3 441.96 0.000 U N 0 -1 0 -1 2 |
| VALUE -1.5 11.09675 0.000 1 1.524 0.2032 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 11.09675 0.000 1 1.524 0.2032 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| Q2 T-CEB 521.92327 429.17715 0.000 U N 1 -1 0 -1 2 |
| VALUE -0.3556 4.5974 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -0.3048 5.0038 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| Q1 T-CEB 482.6 449.58 180.000 U N 1 -1 0 -1 2 |
| VALUE -0.3556 4.5974 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -0.3048 5.0038 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| *CONNECTION* |
| *REMARK* *SIGNAL* SIGNAME SIGFLAG COLOR |
| *REMARK* REFNM.PIN .REUSE. INSTANCE RSIG REFNM.PIN .REUSE. INSTANCE RSIG |
| *SIGNAL* GND 0 -2 |
| R6.1 C2.C |
| M1.2 C2.C |
| R2.1 M1.2 |
| R11.1 R2.1 |
| R11.1 R4.1 |
| R4.1 R10.1 |
| U1.11 R10.1 |
| R8.1 U1.11 |
| *SIGNAL* N00814 0 -2 |
| SW1.2 U1.5 |
| SW1.2 R6.2 |
| Q2.E R6.2 |
| Q2.E C2.A |
| *SIGNAL* VCC 0 -2 |
| R1.2 Q2.C |
| SW1.1 R1.2 |
| SW1.1 R3.2 |
| R3.2 R7.2 |
| D1.A R3.2 |
| R7.2 U1.4 |
| *SIGNAL* N02087 0 -2 |
| R5.1 U1.8 |
| *SIGNAL* N02123 0 -2 |
| R5.2 Q2.B |
| *SIGNAL* N02699 0 -2 |
| R9.2 U1.7 |
| *SIGNAL* N01929 0 -2 |
| R2.2 C1.2 |
| U1.10 C1.2 |
| *SIGNAL* N01826 0 -2 |
| R4.2 U1.9 |
| R3.1 R4.2 |
| *SIGNAL* N02014 0 -2 |
| M1.1 C1.1 |
| R1.1 C1.1 |
| *SIGNAL* N02635 0 -2 |
| U1.6 R7.1 |
| U1.6 R8.2 |
| *SIGNAL* N02735 0 -2 |
| U1.3 R9.1 |
| R10.2 U1.3 |
| *SIGNAL* N02885 0 -2 |
| U1.1 Q1.B |
| *SIGNAL* N03786 0 -2 |
| D1.C Q1.C |
| *SIGNAL* N03815 0 -2 |
| U1.2 R11.2 |
| U1.2 Q1.E |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION METRIC |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 0.508 |
| VIA_TO_TRACK 0.508 |
| VIA_TO_VIA 0.508 |
| PAD_TO_TRACK 0.508 |
| PAD_TO_VIA 0.508 |
| PAD_TO_PAD 0.508 |
| SMD_TO_TRACK 0.508 |
| SMD_TO_VIA 0.508 |
| SMD_TO_PAD 0.508 |
| SMD_TO_SMD 0.508 |
| COPPER_TO_TRACK 0.508 |
| COPPER_TO_VIA 0.508 |
| COPPER_TO_PAD 0.508 |
| COPPER_TO_SMD 0.508 |
| TEXT_TO_TRACK 0.508 |
| TEXT_TO_VIA 0.508 |
| TEXT_TO_PAD 0.508 |
| TEXT_TO_SMD 0.508 |
| OUTLINE_TO_TRACK 0.508 |
| OUTLINE_TO_VIA 0.508 |
| OUTLINE_TO_PAD 0.508 |
| OUTLINE_TO_SMD 0.508 |
| OUTLINE_TO_COPPER 0.508 |
| DRILL_TO_TRACK 0.508 |
| DRILL_TO_VIA 0.508 |
| DRILL_TO_PAD 0.508 |
| DRILL_TO_SMD 0.508 |
| DRILL_TO_COPPER 0.508 |
| SAME_NET_SMD_TO_VIA 0.254 |
| SAME_NET_SMD_TO_CRN 0.254 |
| SAME_NET_VIA_TO_VIA 0.254 |
| SAME_NET_PAD_TO_CRN 0.254 |
| MIN_TRACK_WIDTH 0.508 |
| REC_TRACK_WIDTH 0.635 |
| MAX_TRACK_WIDTH 1.143 |
| DRILL_TO_DRILL 0.1524 |
| BODY_TO_BODY 0.1524 |
| SAME_NET_TRACK_TO_CRN 0.254 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 1269.99996 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 25.4 |
| PARALLEL_GAP 5.08 |
| TANDEM_LENGTH 25.4 |
| TANDEM_GAP 5.08 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 5.08 |
| MATCH_LENGTH_TOLERANCE 5.08 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 2 |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE Value |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Tolerance |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Part Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Description |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Cost |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #2 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE PowerGround |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Voltage |
| { |
| TYPE QUANTITY |
| QUANTITY Voltage |
| ABBR V |
| UNIT Volt |
| MIN -100kV |
| MAX 100kV |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Geometry.Height |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 635.00000mm |
| INHERITANCE PCB |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Diameter |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Sim Direction |
| { |
| TYPE LIST N |
| { |
| SIM_BOTH |
| SIM_IN |
| SIM_OUT |
| } |
| INHERITANCE PIN |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Frequency |
| { |
| TYPE QUANTITY |
| QUANTITY Frequency |
| ABBR Hz |
| UNIT Hertz |
| MIN 0Hz |
| MAX 1000GHz |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Duty Cycle |
| { |
| TYPE QUANTITY |
| QUANTITY |
| ABBR % |
| UNIT percent |
| MIN 0% |
| MAX 100% |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Signal Type |
| { |
| TYPE LIST N |
| { |
| Address |
| Analog High Speed |
| Analog Low Speed |
| Clock |
| Data |
| Do Not Analyze |
| Power Supply |
| Strobe |
| } |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model Pin |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Strategy.Fanout.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.FormatId |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipWidth |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipHeight |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MinLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WToWDistance |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WBtoPad |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxAngle |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WB1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuideCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuide1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPAssignment1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Marker_Shape |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_NumberPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_AngularPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Suffix |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Line_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Preview_Type |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 5 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 50.80000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.AlignmentBGA |
| { |
| TYPE LIST N |
| { |
| Diagonal |
| Quadrant |
| X-pattern |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.DirectionBGA |
| { |
| TYPE LIST N |
| { |
| 45 |
| 135 |
| 225 |
| 315 |
| Clockwise |
| Counterclockwise |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.DirectionBGAstaggered |
| { |
| TYPE LIST N |
| { |
| Horizontal |
| Vertical |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 25.40000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 6.35000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 6.35000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 6.35000mm |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Use |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.X |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 50.80000mm |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Y |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 50.80000mm |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Amplitude.Min |
| { |
| TYPE INTEGER |
| MIN 3 |
| MAX 30 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Gap.Min |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 10 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MaxChannelWidth |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00000mm |
| MAX 254.00000mm |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.SoftLengthRrules |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MeanderBeforeTune |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE MatchLength.Name |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Planning.Scheduled |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET |
| ECO_REGISTRATION Y |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Library.Timestamp |
| { |
| TYPE FREETEXT N |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Design.Timestamp |
| { |
| TYPE FREETEXT N |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DiffPair.MinControlledLength |
| { |
| TYPE FLOAT |
| MIN 20 |
| MAX 100 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DiffPair.MaxIrregularLength |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Guard.BandColor |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Blaze.TestPoint.Color |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Blaze.Thermal.Color |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| PART C1 |
| { |
| Value CK050 |
| } |
| PART C2 |
| { |
| Value 47UF |
| } |
| PART D1 |
| { |
| Value LED5MM |
| } |
| PART M1 |
| { |
| Value MIKE |
| } |
| PART R1 |
| { |
| Value 15K |
| } |
| PART R10 |
| { |
| Value 10K |
| } |
| PART R11 |
| { |
| Value 18 |
| } |
| PART R2 |
| { |
| Value M1 |
| } |
| PART R3 |
| { |
| Value 22K |
| } |
| PART R4 |
| { |
| Value 5K6 |
| } |
| PART R5 |
| { |
| Value 6K8 |
| } |
| PART R6 |
| { |
| Value 1M |
| } |
| PART R7 |
| { |
| Value M39 |
| } |
| PART R8 |
| { |
| Value M1 |
| } |
| PART R9 |
| { |
| Value M1 |
| } |
| PART SW1 |
| { |
| Value PUSH050X050 |
| } |
| PART U1 |
| { |
| Value LM124 |
| } |
| PART Q2 |
| { |
| Value BC547 |
| } |
| PART Q1 |
| { |
| Value BC547 |
| } |
| DECAL C0805 |
| { |
| Description keramicky kondenzator SMD velikost 0805 |
| Geometry.Height 1.5mm |
| Value ??? |
| } |
| DECAL C0603 |
| { |
| Description keramicky kondenzator SMD velikost 0603 |
| Geometry.Height 1.5mm |
| Value ??? |
| } |
| DECAL C1206 |
| { |
| Description keramicky kondenzator SMD velikost 1206 |
| Geometry.Height 1.5mm |
| Value ??? |
| } |
| DECAL CK025 |
| { |
| Description kramicky kondenzator roztec 2.54 mm ,100 mils |
| Geometry.Height 8mm |
| Value ??? |
| } |
| DECAL CK050 |
| { |
| Description keramicky kondenzator roztec 5,08 mm ,200 mils |
| Geometry.Height 8mm |
| Value ??? |
| } |
| DECAL C0805/1206 |
| { |
| Description univerzalni plosky pro C0805 a C1206 |
| Geometry.Height 1.50000mm |
| Value ??? |
| } |
| DECAL C1210 |
| { |
| Description keramicky kondenzator SMD velikost 1210 |
| Geometry.Height 2mm |
| Value ??? |
| } |
| DECAL C1812 |
| { |
| Description keramicky kondenzator SMD velikost 1812 |
| Geometry.Height 2mm |
| Value ??? |
| } |
| DECAL C2220 |
| { |
| Description keramicky kondenzator SMD velikost 2220 |
| Geometry.Height 2mm |
| Value ??? |
| } |
| DECAL ELYTA |
| { |
| Description elektrolyt SMD velikost A |
| Geometry.Height 1.8 mm |
| Value ??? |
| } |
| DECAL ELYTB |
| { |
| Description elektrolyt SMD velikost B |
| Geometry.Height 2 mm |
| Value ??? |
| } |
| DECAL ELYTC |
| { |
| Description elektrolyt SMD velikost C |
| Geometry.Height 2.8 mm |
| Value ??? |
| } |
| DECAL ELYTD |
| { |
| Description elektrolyt SMD velikost D |
| Geometry.Height 3 mm |
| Value ??? |
| } |
| DECAL CE020X5 |
| { |
| Description Elyt prumer 5mm, roztec 2.032mm - 80 mils |
| Geometry.Height 12 mm |
| Value ??? |
| } |
| DECAL CE025X6 |
| { |
| Description Elyt prumer 6.3mm, roztec 2.54mm - 100 mils |
| Geometry.Height 12 mm |
| Value ??? |
| } |
| DECAL CE035X8 |
| { |
| Description Elyt prumer 8 mm, roztec3.505 mm - 138 mils |
| Geometry.Height 12 mm |
| Value ??? |
| } |
| DECAL CE050X10 |
| { |
| Description Elyt prumer 10mm, roztec 5.08mm - 200 mils |
| Geometry.Height 17 mm |
| Value ??? |
| } |
| DECAL CE050X13 |
| { |
| Description Elyt prumer 13mm, roztec 5.08mm - 200 mils |
| Geometry.Height 27 mm |
| Value ??? |
| } |
| DECAL CE075X16 |
| { |
| Description Elyt prumer 16mm, roztec 7.5mm - 300 mils |
| Geometry.Height 26 mm |
| Value ??? |
| } |
| DECAL CE075X18 |
| { |
| Description Elyt prumer 18mm, roztec 7.5mm - 300 mils |
| Geometry.Height 43 mm |
| Value ??? |
| } |
| DECAL CE020X5/L |
| { |
| Description Elyt prumer 5mm na lezato, roztec 2.032mm - 80 mils |
| Geometry.Height 5.5 mm |
| Value ??? |
| } |
| DECAL CE025X6/L |
| { |
| Description Elyt prumer 6.3mm na lezato, roztec 2.54mm - 100 mils |
| Geometry.Height 6.5 mm |
| Value ??? |
| } |
| DECAL CE035X8/L |
| { |
| Description Elyt prumer 8 mm na lezato, roztec3.505 mm - 138 mils |
| Geometry.Height 8.5 mm |
| Value ??? |
| } |
| DECAL CE050X10/L |
| { |
| Description Elyt prumer 10mm na lezato, roztec 5.08mm - 200 mils |
| Geometry.Height 10.5 mm |
| Value ??? |
| } |
| DECAL LED0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL LED0805-1206 |
| { |
| Description univerzalni plosky pro LED pro pouzdro 0805 i 1206 |
| Geometry.Height 1.50000mm |
| Value ??? |
| } |
| DECAL LED0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL LED1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL LED1.8 |
| { |
| Description LED 1.8 mm roztec 2.54 mm - 100 mils |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL LED3 |
| { |
| Description LED 3 mm, roztec 2.54 mm - 100 mils |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL LED10 |
| { |
| Description LED 10 mm roztec 2.54 mm - 100 mils |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL LED5 |
| { |
| Description LED 5 mm roztec 2.54 mm - 100 mils |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL ARK210/2 |
| { |
| Description svorkovnice se dvema piny, roztec 5.08 mm - 200 mils |
| Geometry.Height 13 mm |
| Value ??? |
| } |
| DECAL TO92 |
| { |
| Description tranzistorove pouzdro TO92, kolektor uprostred |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO92/B |
| { |
| Description TO92, kolektor uprostred, pro bastleni |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO92/BSMD |
| { |
| Description TO92, kolektor uprostred, vyvody v jedne rade |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO92/L |
| { |
| Description TO92, kolektor uprostred, vyvody v jedne rade |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO39 |
| { |
| Description velke kovove pouzdro TO39 |
| Geometry.Height 10 mm |
| } |
| DECAL SOT37 |
| { |
| Description pouzdro pro tranzistory BFR... |
| Geometry.Height 2.5 mm |
| } |
| DECAL SOT37/SMD |
| { |
| Description pouzdro pro tranzistory BFR... montaz SMD |
| Geometry.Height 2.5 mm |
| } |
| DECAL R0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL R0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL R1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL RS025 |
| { |
| Description bezny rezistor nastojato roztec 2,54 mm, 100 mils |
| Geometry.Height 9 mm |
| Value ??? |
| } |
| DECAL RL090 |
| { |
| Description bezny rezistor roztec 8.89mm, 350mils |
| Geometry.Height 3mm |
| Value ??? |
| } |
| DECAL RL140 |
| { |
| Description rezistor 2W nalezato roztec 13.97mm, 550mils |
| Geometry.Height 4.6mm |
| Value ??? |
| } |
| DECAL RS040 |
| { |
| Description rezistor 2W nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| Value ??? |
| } |
| DECAL R1812 |
| { |
| Description rezistor SMD velikost 1812 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL PUSH050X050SMD |
| { |
| Description ctvercove SMD spinaci tlacitko , vyvody 1-4 a 2-3 propojeny |
| Geometry.Height 5.00000mm |
| Value ??? |
| } |
| DECAL PUSH120 |
| { |
| Description Kulate tlacitko s vyvody v rosteci 5x5mm |
| Geometry.Height 8 mm |
| } |
| DECAL PUSH120SQ |
| { |
| Description Kulate tlacitko s vyvody v rastru 5x5mm s hranatym hmatnikem |
| Geometry.Height 8 mm |
| } |
| DECAL P-B1727 |
| { |
| Description hranate tlacitko 10x10mm |
| Geometry.Height 8 mm |
| } |
| DECAL PUSH050X050 |
| { |
| Description ctvercove spinaci tlacitko , vyvody 1-4 a 2-3 propojeny |
| Geometry.Height 5.00000mm |
| } |
| DECAL DIP14_300 |
| { |
| Description pozdro DIP14 roztec 7.62 mm - 300 mils |
| Geometry.Height 6 mm |
| Value ??? |
| } |
| PARTTYPE C |
| { |
| Description ruzne druhy kondenzatoru |
| Value ??? |
| } |
| PARTTYPE C-ELYT |
| { |
| Description ruzne druhy elektrolytickych kondenzatoru |
| Value ??? |
| } |
| PARTTYPE LED |
| { |
| Description ruzne druhy LED |
| Value ??? |
| } |
| PARTTYPE T-CEB |
| { |
| Description Tanzistory s poradim nozicek 1=C 2-E 3=B |
| Value ??? |
| } |
| PARTTYPE R |
| { |
| Description rezistory ruznych typu |
| Value ??? |
| } |
| PARTTYPE DIP14_300 |
| { |
| Value ??? |
| } |
| PCB DEFAULT |
| { |
| Accordion.Amplitude.Min 3 |
| Accordion.Gap.Min 1 |
| AutoDimensioning.Line_Layer 24 |
| AutoDimensioning.Marker_Shape YYNNNY |
| AutoDimensioning.Preview_Type 1 |
| AutoDimensioning.Text_AngularPrecision 0 0 0 |
| AutoDimensioning.Text_Layer 24 |
| AutoDimensioning.Text_NumberPrecision 0 1 2 |
| AutoDimensioning.Text_Suffix mil##mm##" |
| Blaze.TestPoint.Color 8 |
| Blaze.Thermal.Color 8 |
| DiffPair.MaxIrregularLength 12.70000mm |
| DiffPair.MinControlledLength 80 |
| Guard.BandColor 7 |
| Placement.Grid.Use No |
| Placement.Grid.X 2.54000mm |
| Placement.Grid.Y 2.54000mm |
| Routing.MaxChannelWidth 2.54000mm |
| Routing.MeanderBeforeTune Yes |
| Routing.SoftLengthRrules Yes |
| Rules.ViaAtSMD No |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.AlignmentBGA Quadrant |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.DirectionBGA 45 |
| Rules.Fanout.DirectionBGAstaggered Horizontal |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Length.Maximum 6.35000mm |
| Rules.Fanout.Length.Unlimited Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.ViaAtSMD.FitInside Yes |
| Strategy.Center.Intensity Low |
| Strategy.Center.Pass No |
| Strategy.Center.Pause No |
| Strategy.Center.PlanePriority 0 |
| Strategy.Center.Priority 1 |
| Strategy.Center.Protect No |
| Strategy.Fanout.Intensity Medium |
| Strategy.Fanout.Pass No |
| Strategy.Fanout.Pause No |
| Strategy.Fanout.PlanePriority 0 |
| Strategy.Fanout.Priority 1 |
| Strategy.Fanout.Protect No |
| Strategy.Miters.Intensity Low |
| Strategy.Miters.Pass No |
| Strategy.Miters.Pause No |
| Strategy.Miters.PlanePriority 0 |
| Strategy.Miters.Priority 1 |
| Strategy.Miters.Protect No |
| Strategy.Optimize.Intensity Low |
| Strategy.Optimize.Pass Done |
| Strategy.Optimize.Pause No |
| Strategy.Optimize.PlanePriority 0 |
| Strategy.Optimize.Priority 1 |
| Strategy.Optimize.Protect No |
| Strategy.Patterns.Intensity Medium |
| Strategy.Patterns.Pass No |
| Strategy.Patterns.Pause No |
| Strategy.Patterns.PlanePriority 0 |
| Strategy.Patterns.Priority 1 |
| Strategy.Patterns.Protect No |
| Strategy.Route.Intensity Medium |
| Strategy.Route.Pass Done |
| Strategy.Route.Pause No |
| Strategy.Route.PlanePriority 0 |
| Strategy.Route.Priority 1 |
| Strategy.Route.Protect No |
| Strategy.TestPoint.Intensity Low |
| Strategy.TestPoint.Pass No |
| Strategy.TestPoint.Pause No |
| Strategy.TestPoint.PlanePriority 0 |
| Strategy.TestPoint.Priority 1 |
| Strategy.TestPoint.Protect No |
| Strategy.Tune.Intensity Medium |
| Strategy.Tune.Pass No |
| Strategy.Tune.Pause No |
| Strategy.Tune.PlanePriority 0 |
| Strategy.Tune.Priority 1 |
| Strategy.Tune.Protect No |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/ecogtmp1.asc |
|---|
| 0,0 → 1,4248 |
| !PADS-POWERPCB-V2005.0-MILS! DESIGN DATABASE ASCII FILE 1.0 |
| *PCB* GENERAL PARAMETERS OF THE PCB DESIGN |
| UNITS 0 2=Inches 1=Metric 0=Mils |
| USERGRID 100 100 Space between USER grid points |
| MAXIMUMLAYER 2 Maximum routing layer |
| WORKLEVEL 1 Level items will be created on |
| DISPLAYLEVEL 1 toggle for displaying working level last |
| LAYERPAIR 1 2 Layer pair used to route connection |
| VIAMODE T Type of via to use when routing between layers |
| LINEWIDTH 10 Width items will be created with |
| TEXTSIZE 100 10 Height and LineWidth text will be created with |
| JOBTIME 0 Amount of time spent on this PCB design |
| DOTGRID 1000 1000 Space between graphic dots |
| SCALE 3.465 Scale of window expansion |
| ORIGIN 10000 10000 User defined origin location |
| WINDOWCENTER 10000 10000 Point defining the center of the window |
| BACKUPTIME 20 Number of minutes between database backups |
| REAL WIDTH 10 Widths greater then this are displayed real size |
| ALLSIGONOFF 1 All signal nets displayed on/off |
| REFNAMESIZE 100 10 Height and LineWidth used by part ref. names |
| HIGHLIGHT 0 Highlight nets flag |
| JOBNAME Untitled |
| CONCOL 1 |
| FBGCOL 1 0 |
| HATCHGRID 10 Copper pour hatching grid |
| TEARDROP 2713690 Teardrop tracks |
| THERLINEWID 15 Copper pour thermal line width |
| PSVIAGRID 25 25 Push & Shove Via Grid |
| PADFILLWID 10 CAM finger pad fill width |
| THERSMDWID 10 Copper pour thermal line width for SMD |
| MINHATAREA 0 Minimum hatch area |
| HATCHMODE 0 Hatch generation mode |
| HATCHDISP 0 Hatch display flag |
| DRILLHOLE 6 Drill hole checking spacing |
| MITRERADII 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |
| MITRETYPE 1 Mitring type |
| HATCHRAD 0.500000 Hatch outline smoothing radius |
| MITREANG 180 180 180 180 180 180 90 |
| HATCHANG 0 Hatch angle |
| THERFLAGS 0 Copper pour thermal line flags |
| DRLOVERSIZE 3 Drill oversize for plated holes |
| PLANERAD 0.000000 Plane outline smoothing radius |
| PLANEFLAGS OUTLINE THERMALS Y Y Y N N Y Y Y N N Y Y N Y Y N N N Plane and Test Points flags |
| COMPHEIGHT 0 Board Top Component Height Restriction |
| KPTHATCHGRID 100 Copper pour hatching grid |
| BOTCMPHEIGHT 0 Board Bottom Component Height Restriction |
| FANOUTGRID 25 25 Fanout grid |
| FANOUTLENGTH 250 Maximum fanout length |
| ROUTERFLAGS 83879441 Autorouter specific flags |
| VERIFYFLAGS 1861 Verify Design flags |
| FABCHKFLAGS 3967 Fabrication checks flags |
| ATMAXSIZE 3 Acid Traps Maximum Size |
| ATMAXANGLE 161999820 Acid Traps Maximum Angle |
| SLMINCOPPER 3 Slivers Minimum Copper |
| SLMINMASK 3 Slivers Minimum Mask |
| STMINCLEAR 5 Starved Thermal Minimum Clearance |
| STMINSPOKES 4 Starved Thermal Minimum Spokes |
| TPMINWIDTH 3 Minimum Trace Width |
| TPMINSIZE 3 Mimimum Pad Size |
| SSMINGAP 3 Silk Screen Over Pads Minimum Gap |
| SBMINGAP 3 Solder Bridges Minimum Gap |
| SBLAYER 1 Solder Bridges Layer |
| ARPTOM 3 Pad To Mask Annular Ring |
| ARPTOMLAYER 1 Pad To Mask Annular Ring Layer |
| ARDTOM 3 Drill To Mask Annular Ring |
| ARDTOMLAYER 1 Drill To Mask Annular Ring Layer |
| ARDTOP 3 Drill To Pad Annular Ring |
| ARDTOPLAYER 0 Drill To Pad Annular Ring Layer |
| PLNSEPGAP 6 Plane separation gap |
| IDFSHAPELAY 0 IDF shapes layer |
| TEARDROPDATA 90 90 |
| *PARTDECAL* ITEMS |
| *REMARK* NAME UNITS ORIX ORIY PIECES TERMINALS STACKS TEXT LABELS |
| *REMARK* PIECETYPE CORNERS WIDTHHGHT LEVEL RESTRICTIONS |
| *REMARK* PIECETYPE CORNERS WIDTH LEVEL PINNUM |
| *REMARK* XLOC YLOC BEGINANGLE DELTAANGLE |
| *REMARK* XLOC YLOC ORI LEVEL HEIGHT WIDTH MIRRORED HJUST VJUST |
| *REMARK* VISIBLE XLOC YLOC ORI LEVEL HEIGTH WIDTH MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* FONTSTYLE FONTFACE |
| *REMARK* T XLOC YLOC NMXLOC NMYLOC |
| *REMARK* PAD PIN STACKLINES |
| *REMARK* LEVEL SIZE SHAPE IDIA DRILL [PLATED] |
| *REMARK* LEVEL SIZE SHAPE FINORI FINLENGTH FINOFFSET DRILL [PLATED] |
| C0805 M 0 0 2 2 1 0 2 |
| OPEN 4 0.2032 0 |
| -0.4064 0.9652 |
| -1.7272 0.9652 |
| -1.7272 -0.9652 |
| -0.4064 -0.9652 |
| OPEN 4 0.2032 0 |
| 0.4064 0.9652 |
| 1.7272 0.9652 |
| 1.7272 -0.9652 |
| 0.4064 -0.9652 |
| VALUE -1.5494 3.8608 0.000 1 1.524 0.2032 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.4986 1.2446 0.000 1 1.524 0.2032 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-0.9652 0 -1.04 -0.4 |
| T0.9652 0 0.77 -0.39 |
| PAD 0 5 |
| -2 0.9906 RF 90.000 1.4224 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 1.143 RF 90.000 1.5748 0 |
| 23 0.889 RF 90.000 1.3208 0 |
| C0603 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -12 30 |
| -58 30 |
| -58 -30 |
| -12 -30 |
| OPEN 4 8 0 |
| 12 30 |
| 58 30 |
| 58 -30 |
| 12 -30 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-30 0 -35 -15 |
| T30 0 22 -15 |
| PAD 0 5 |
| -2 35 RF 90.000 40 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 41 RF 90.000 46 0 |
| 23 31 RF 90.000 36 0 |
| C1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -34 45 |
| -90 45 |
| -90 -45 |
| -34 -45 |
| OPEN 4 8 0 |
| 34 45 |
| 90 45 |
| 90 -45 |
| 34 -45 |
| VALUE -59 61 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -66 172 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-57 0 -59.94 -15.75 |
| T57 0 49.31 -15.35 |
| PAD 0 5 |
| -2 43 RF 90.000 70 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 49 RF 90.000 76 0 |
| 23 37 RF 90.000 66 0 |
| CK025 M 0 0 2 2 1 0 2 |
| OPEN 2 0.2 0 |
| 1.25 1.5 |
| -1.25 1.5 |
| OPEN 2 0.2 0 |
| 1.25 -1.5 |
| -1.25 -1.5 |
| VALUE -1.5 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.7 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-1.254 0 -1.35 -0.4 |
| T1.254 0 1.05 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| CK050 M 0 0 2 2 1 0 2 |
| OPEN 2 0.2 0 |
| 2.6 1.5 |
| -2.6 1.5 |
| OPEN 2 0.2 0 |
| 2.6 -1.5 |
| -2.6 -1.5 |
| VALUE -1.5 4.7 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-2.504 0 -2.6 -0.4 |
| T2.504 0 2.3 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| C0805/1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| 32 45 |
| 90 45 |
| 90 -45 |
| 32 -45 |
| OPEN 4 8 0 |
| -32 45 |
| -90 45 |
| -90 -45 |
| -32 -45 |
| VALUE -53 62 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 169 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-45 0 -47.94 -15.75 |
| T45 0 37.31 -15.35 |
| PAD 0 5 |
| -2 70 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 76 S |
| 23 66 S |
| C1210 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -41 62 |
| -105 62 |
| -105 -62 |
| -41 -62 |
| OPEN 4 8 0 |
| 41 62 |
| 105 62 |
| 105 -62 |
| 41 -62 |
| VALUE -59 49 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -61 152 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-70 0 -72.94 -15.75 |
| T70 0 62.31 -15.35 |
| PAD 0 5 |
| -2 52 RF 90.000 105 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 58 RF 90.000 111 0 |
| 23 48 RF 90.000 101 0 |
| C1812 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -65 73 |
| -141 73 |
| -141 -73 |
| -65 -73 |
| OPEN 4 8 0 |
| 65 73 |
| 141 73 |
| 141 -73 |
| 65 -73 |
| VALUE -59 49 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -61 152 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 0 -102.94 -15.75 |
| T100 0 92.31 -15.35 |
| PAD 0 5 |
| -2 67 RF 90.000 130 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 73 RF 90.000 136 0 |
| 23 63 RF 90.000 126 0 |
| C2220 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -87 116 |
| -188 116 |
| -188 -116 |
| -87 -116 |
| OPEN 4 8 0 |
| 87 116 |
| 188 116 |
| 188 -116 |
| 87 -116 |
| VALUE -61 152 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59 49 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-135 0 -137.94 -15.75 |
| T135 0 127.31 -15.35 |
| PAD 0 5 |
| -2 87 RF 90.000 213 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 93 RF 90.000 219 0 |
| 23 83 RF 90.000 209 0 |
| ELYTA I 0 0 2 2 1 0 2 |
| OPEN 6 8 0 |
| -27 44 |
| -101.43 44 |
| -109.43 36 |
| -109.43 -36 |
| -101.43 -44 |
| -27 -44 |
| OPEN 4 8 0 |
| 27 44 |
| 107 44 |
| 107 -44 |
| 27 -44 |
| VALUE -55.6 63.8 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -52.24 173.48 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-63 0 -65.94 -15.75 |
| T63 0 55.31 -15.35 |
| PAD 0 5 |
| -2 65 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 71 S |
| 23 61 S |
| ELYTB I 0 0 2 2 1 0 2 |
| OPEN 6 8 0 |
| -35 62 |
| -95 62 |
| -103 54 |
| -103 -54 |
| -95 -62 |
| -35 -62 |
| OPEN 4 8 0 |
| 35 62 |
| 103 62 |
| 103 -62 |
| 35 -62 |
| VALUE -59.69 265.98 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.69 157.89 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-65 0 -67.94 -15.75 |
| T65 0 57.31 -15.35 |
| PAD 0 5 |
| -2 55 RF 90.000 100 0 0 |
| -1 0 R |
| 0 0 R |
| 21 61 RF 90.000 106 0 |
| 23 51 RF 90.000 96 0 |
| ELYTC I 0 0 2 2 1 0 2 |
| OPEN 6 8 0 |
| -55 70 |
| -145 70 |
| -153 62.41 |
| -153 -61.91 |
| -145 -70 |
| -55 -70 |
| OPEN 4 8 0 |
| 55 70 |
| 153 70 |
| 153 -70 |
| 55 -70 |
| VALUE -64.97 198.8 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -61.55 88.37 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-100 0 -102.94 -15.75 |
| T100 0 92.31 -15.35 |
| PAD 0 5 |
| -2 85 RF 90.000 100 0 0 |
| -1 0 R |
| 0 0 R |
| 21 91 RF 90.000 106 0 |
| 23 81 RF 90.000 96 0 |
| ELYTD I 0 0 2 2 1 1 2 |
| OPEN 6 8 0 |
| -80 92 |
| -170 92 |
| -180 82 |
| -180 -82 |
| -170 -92 |
| -78 -92 |
| OPEN 4 8 0 |
| 80 92 |
| 180 92 |
| 180 -92 |
| 80 -92 |
| -136.59 -15.94 0.000 26 60 8 N LEFT DOWN 0 |
| Regular <PADS Stroke Font> |
| K |
| VALUE -55.71 114.39 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -56.97 228.14 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-126 0 -128.94 -15.75 |
| T126 0 118.31 -15.35 |
| PAD 0 5 |
| -2 85 RF 90.000 120 0 0 |
| -1 0 R |
| 0 0 R |
| 21 91 RF 90.000 126 0 |
| 23 81 RF 90.000 116 0 |
| CE020X5 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 105 0 |
| -105 0 |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-40 0 -43.78 -15.75 |
| T40 0 31.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE025X6 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 130 0 |
| -130 0 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-50 0 -53.78 -15.75 |
| T50 0 41.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE035X8 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 170 0 |
| -170 0 |
| VALUE -48.01 295.22 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -49.23 191.31 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-69 0 -72.78 -15.75 |
| T69 0 60.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE050X10 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 210 0 |
| -210 0 |
| VALUE -52.12 339.78 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -49.7 229.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-100 0 -103.78 -15.75 |
| T100 0 91.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE050X13 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 270 0 |
| -270 0 |
| VALUE -50 430 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -50 310 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-100 0 -103.78 -15.75 |
| T100 0 91.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE075X16 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 325 0 |
| -325 0 |
| VALUE -60 460 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -64.3 354.09 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-150 0 -153.78 -15.75 |
| T150 0 141.97 -11.81 |
| PAD 0 5 |
| -2 80 R 45 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PAD 1 5 |
| -2 80 S 40 |
| -1 80 S |
| 0 80 S |
| 21 86 S |
| 28 86 S |
| CE075X18 I 0 0 1 2 2 0 2 |
| CIRCLE 2 8 0 |
| 367 0 |
| -367 0 |
| VALUE -58.64 391.11 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -60 500 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-150 0 -153.78 -15.75 |
| T150 0 141.97 -11.81 |
| PAD 0 5 |
| -2 80 R 40 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PAD 1 5 |
| -2 80 S 40 |
| -1 80 S |
| 0 80 S |
| 21 86 S |
| 28 86 S |
| CE020X5/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -105 -60 |
| 101 -60 |
| 101 -487 |
| -105 -487 |
| -105 -60 |
| OPEN 2 8 0 |
| -37 -40 |
| -37 -60 |
| OPEN 2 8 0 |
| 40 -40 |
| 40 -60 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-40 0 -43.78 -15.75 |
| T40 0 31.97 -11.81 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| PAD 1 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| CE025X6/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -129 -60 |
| 129 -60 |
| 129 -485 |
| -129 -485 |
| -129 -60 |
| OPEN 3 8 0 |
| -48 -40 |
| -49 -60 |
| -51 -59 |
| OPEN 2 8 0 |
| 50 -40 |
| 50 -60 |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-50 0 -53.78 -15.75 |
| T50 0 41.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE035X8/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -168 -60 |
| 169 -60 |
| 169 -487 |
| -168 -487 |
| -168 -60 |
| OPEN 2 8 0 |
| -68 -40 |
| -68 -60 |
| OPEN 2 8 0 |
| 71 -40 |
| 71 -60 |
| VALUE -48.01 295.22 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -49.23 191.31 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-69 0 -72.78 -15.75 |
| T69 0 60.97 -11.81 |
| PAD 0 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| PAD 2 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| CE050X10/L I 0 0 3 2 2 0 2 |
| CLOSED 5 8 0 |
| -210 -70 |
| 208 -70 |
| 208 -682 |
| -210 -682 |
| -210 -70 |
| OPEN 2 8 0 |
| -100 -40 |
| -100 -70 |
| OPEN 2 8 0 |
| 100 -40 |
| 100 -70 |
| VALUE -49.7 229.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -52.12 339.78 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 0 -103.78 -15.75 |
| T100 0 91.97 -11.81 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| PAD 1 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 65.91 S |
| 28 65.91 S |
| ARK210/2 M 2.54 0 1 2 2 0 2 |
| CLOSED 5 0.2 0 |
| -5 4.5 |
| 5 4.5 |
| 5 -4.5 |
| -5 -4.5 |
| -5 4.5 |
| VALUE -1.5 7.5 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.5 5 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-2.54 0 -2.6924 -0.3302 |
| T2.54 0 2.54 0 |
| PAD 0 5 |
| -2 1.905 R 1.016 |
| -1 1.905 R |
| 0 1.905 R |
| 21 2.0574 R |
| 28 2.0574 R |
| PAD 1 5 |
| -2 1.905 S 1.016 |
| -1 1.905 S |
| 0 1.905 S |
| 21 2.0574 S |
| 28 2.0574 S |
| TO92 M 0 0 2 4 2 0 2 |
| OPEN 3 0.2 0 |
| 0.8 2.5 900 1800 -1.7 -2.5 3.3 2.5 |
| 0.8 -2.5 |
| 1.8034 -2.4892 |
| OPEN 3 0.2 0 |
| 1.8 -2.5 |
| 1.8 2.5 |
| 0.7874 2.5 |
| VALUE -0.3048 5.0038 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -0.3556 4.5974 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T0.635 -1.27 0.4064 -1.6002 |
| T0.635 1.27 0.4826 0.9144 |
| T-0.635 0 -0.8382 -0.3302 |
| T1.143 -0.0254 1.143 -0.0254 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO92/B M 0 0 2 4 2 0 2 |
| OPEN 2 0.2 0 |
| 1 -3.9 2700 -1800 -2.9 -3.9 4.9 3.9 |
| 1 3.9 |
| OPEN 4 0.2 0 |
| 1 3.9 |
| 2.5 3.9 |
| 2.5 -3.9 |
| 1 -3.9 |
| VALUE -2.93494 -1.71825 90.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -5.87759 -1.97099 90.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T1.27 -2.54 1.0414 -2.8702 |
| T1.27 2.54 1.1176 2.1844 |
| T-1.27 0 -1.4732 -0.3302 |
| T1.0668 0 1.0668 0 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO92/BSMD M 0 0 4 4 2 0 2 |
| CLOSED 5 0.2 0 |
| 4.5 2.3 |
| 9.2 2.3 |
| 9.2 -2.3 |
| 4.5 -2.3 |
| 4.5 2.3 |
| OPEN 2 0.2 0 |
| 1.5 1 |
| 4.5 1 |
| OPEN 2 0.2 0 |
| 1.5 -1 |
| 4.5 -1 |
| OPEN 2 0.2 0 |
| 1.5 0 |
| 4.5 0 |
| VALUE -1.4478 5.4102 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.3716 5.207 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T0 -1.1 -0.2286 -1.4302 |
| T0 1.1 -0.1524 0.7444 |
| T0 0 -0.2032 -0.3302 |
| T-1.2954 -0.1016 -1.2954 -0.1016 |
| PAD 0 5 |
| -2 0.8128 RF 0.000 2.032 0 0 |
| -1 0 R |
| 0 0 R |
| 21 0.9652 RF 0.000 2.1844 0 |
| 23 0.7112 RF 0.000 1.9304 0 |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO92/L M 0 0 2 4 2 0 2 |
| OPEN 2 0.2 0 |
| -0.95792 2.44311 1200 1200 -2.4013 -2.94364 3.37221 2.82986 |
| -0.95792 -2.55689 |
| OPEN 2 0.2 0 |
| 1.016 2.54 |
| 1.016 -2.54 |
| VALUE -1.4478 5.4102 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.3716 5.207 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T0 -2.54 -0.2286 -2.8702 |
| T0 2.54 -0.1524 2.1844 |
| T0 0 -0.2032 -0.3302 |
| T-1.2954 -0.1016 -1.2954 -0.1016 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| TO39 M 0 0 3 4 2 0 2 |
| CIRCLE 2 0.2 0 |
| 3.5 0 |
| -5.7 0 |
| OPEN 2 0.2 0 |
| -2.3 -4.4 |
| -3.1 -4.1 |
| OPEN 4 0.2 0 |
| -4.2 -3.4 |
| -4.6 -3.8 |
| -5.1 -3.3 |
| -4.7 -2.9 |
| VALUE -1.6 8.1 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -1.6 5.2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-1.27 2.54 -1.435 2.17 |
| T-1.27 -2.54 -1.435 -2.97 |
| T1.27 0 1.066 -0.3 |
| T-3.9878 -0.4064 -3.9878 -0.4064 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| SOT37 I 0 0 1 4 2 0 2 |
| CIRCLE 2 8 0 |
| 100 0 |
| -100 0 |
| VALUE -53 121 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 228 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T145 1 145 1 |
| T0 -145 0 -145 |
| T-145 0 -145 0 |
| T0 84 0 84 |
| PAD 0 5 |
| -2 80 R 45 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PAD 4 3 |
| -2 0 R 0 |
| -1 0 R |
| 0 0 R |
| SOT37/SMD I 0 0 1 4 3 0 2 |
| CIRCLE 2 8 0 |
| 100 0 |
| -100 0 |
| VALUE -53 121 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -53 228 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T185 0 185 0 |
| T0 -185 0 -185 |
| T-185 0 -185 0 |
| T16 106 16 106 |
| PAD 0 5 |
| -2 60 RF 0.000 150 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 66 RF 0.000 156 0 |
| 23 56 RF 0.000 146 0 |
| PAD 2 5 |
| -2 60 RF 90.000 150 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 66 RF 90.000 156 0 |
| 23 56 RF 90.000 146 0 |
| PAD 4 3 |
| -2 0 R 0 N |
| -1 0 R |
| 0 0 R |
| R0805 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -16 35 |
| -68 35 |
| -68 -35 |
| -16 -35 |
| OPEN 4 8 0 |
| 16 35 |
| 68 35 |
| 68 -35 |
| 16 -35 |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-38 0 -35 -15 |
| T38 0 38.89 -15 |
| PAD 0 5 |
| -2 39 RF 90.000 51 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 45 RF 90.000 57 0 |
| 23 35 RF 90.000 47 0 |
| R0603 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -12 30 |
| -58 30 |
| -58 -30 |
| -12 -30 |
| OPEN 4 8 0 |
| 12 30 |
| 58 30 |
| 58 -30 |
| 12 -30 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57.87 46.06 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-30 0 -35 -15 |
| T30 0 22 -15 |
| PAD 0 5 |
| -2 35 RF 90.000 40 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 41 RF 90.000 46 0 |
| 23 31 RF 90.000 36 0 |
| R1206 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -34 45 |
| -90 45 |
| -90 -45 |
| -34 -45 |
| OPEN 4 8 0 |
| 34 45 |
| 90 45 |
| 90 -45 |
| 34 -45 |
| VALUE -59 61 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -66 172 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-57 0 -59.94 -15.75 |
| T57 0 49.31 -15.35 |
| PAD 0 5 |
| -2 43 RF 90.000 70 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 49 RF 90.000 76 0 |
| 23 37 RF 90.000 66 0 |
| RS025 I 0 0 2 2 1 0 2 |
| CIRCLE 2 8 0 |
| 12.99 0 |
| -112.99 0 |
| OPEN 2 8 0 |
| -15 0 |
| 15 0 |
| VALUE -59.06 70.87 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 173.23 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-50 0 -53.94 -15.75 |
| T50 0 42.13 -11.81 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 65.91 R |
| 28 65.91 R |
| RL090 M 0 0 1 2 1 0 2 |
| CLOSED 5 0.2 0 |
| -3.5 1.5 |
| 3.5 1.5 |
| 3.5 -1.5 |
| -3.5 -1.5 |
| -3.5 1.5 |
| VALUE -1.3 2 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.5 4.8 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-4.445 0 -4.545 -0.4 |
| T4.445 0 4.245 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| RL140 M 0 0 1 2 1 0 2 |
| CLOSED 5 0.2 0 |
| -6 2.3 |
| 6 2.3 |
| 6 -2.3 |
| -6 -2.3 |
| -6 2.3 |
| VALUE -1.2 2.7 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -1.3 5.4 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-6.985 0 -7.085 -0.4 |
| T6.985 0 6.785 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| RS040 M 0 0 2 2 1 0 2 |
| CIRCLE 2 0.2 0 |
| 0.595 0 |
| -4.405 0 |
| OPEN 2 0.2 0 |
| -1.016 0 |
| 1.016 0 |
| VALUE -0.5 2.5 0.000 1 1.524 0.2 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -0.6 5.2 0.000 1 1.524 0.2 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-1.905 0 -2.005 -0.4 |
| T1.905 0 1.705 -0.3 |
| PAD 0 5 |
| -2 1.524 R 0.889 |
| -1 1.524 R |
| 0 1.524 R |
| 21 1.674 R |
| 28 1.674 R |
| R1812 I 0 0 2 2 1 0 2 |
| OPEN 4 8 0 |
| -50 80 |
| -128 80 |
| -128 -80 |
| -50 -80 |
| OPEN 4 8 0 |
| 50 80 |
| 128 80 |
| 128 -80 |
| 50 -80 |
| VALUE -58.66 150.79 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -57 165 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-93 0 -90 -15 |
| T93 0 93.89 -15 |
| PAD 0 5 |
| -2 50 RF 90.000 140 0 0 N |
| -1 0 R |
| 0 0 R |
| 21 55 RF 90.000 145 0 |
| 23 45 RF 90.000 136 0 |
| PUSH050X050SMD I 0 0 2 4 1 0 2 |
| CLOSED 5 8 0 |
| -90 113 |
| 90 113 |
| 90 -113 |
| -90 -113 |
| -90 113 |
| CIRCLE 2 8 0 |
| 55 0 |
| -55 0 |
| VALUE -39 220 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -39 220 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-150 85 -150 85 |
| T-150 -85 -150 -85 |
| T150 -85 150 -85 |
| T150 85 150 85 |
| PAD 0 5 |
| -2 90 S 0 N |
| -1 0 R |
| 0 0 R |
| 21 96 S |
| 23 84 S |
| PUSH120 I 0 0 3 4 1 0 2 |
| CIRCLE 2 8 0 |
| 180 0 |
| -180 0 |
| OPEN 2 8 0 |
| -225 100 1565 -3129 -245.83 -250.44 255.04 250.44 |
| -225 -100 |
| OPEN 2 8 0 |
| -225 100 |
| -225 -100 |
| VALUE 0 0 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE 0 0 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 100 -100 100 |
| T-100 -100 -100 -100 |
| T100 -100 100 -100 |
| T100 100 100 100 |
| PAD 0 5 |
| -2 80 R 44 |
| -1 60 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| PUSH120SQ I 0 0 3 4 1 0 2 |
| OPEN 2 8 0 |
| -225 100 1565 -3129 -245.83 -250.44 255.04 250.44 |
| -225 -100 |
| OPEN 2 8 0 |
| -225 100 |
| -225 -100 |
| CLOSED 5 8 0 |
| -149.61 -149.61 |
| 149.61 -149.61 |
| 149.61 149.61 |
| -149.61 149.61 |
| -149.61 -149.61 |
| VALUE 0 0 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE 0 0 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| T-100 100 -100 100 |
| T-100 -100 -100 -100 |
| T100 -100 100 -100 |
| T100 100 100 100 |
| PAD 0 5 |
| -2 80 R 44 |
| -1 60 R |
| 0 80 R |
| 21 86 R |
| 28 86 R |
| P-B1727 I 0 0 6 4 1 0 2 |
| CLOSED 3 10 0 |
| -196.85 157.48 |
| -196.85 196.85 |
| -196.85 157.48 |
| OPEN 4 8 0 |
| -196.85 157.48 |
| -196.85 196.85 |
| 196.85 196.85 |
| 196.85 157.48 |
| OPEN 2 8 0 |
| 196.85 39.37 |
| 196.85 -39.37 |
| OPEN 4 8 0 |
| 196.85 -157.48 |
| 196.85 -196.85 |
| -196.85 -196.85 |
| -196.85 -157.48 |
| OPEN 2 8 0 |
| -196.85 -39.37 |
| -196.85 39.37 |
| CIRCLE 2 8 0 |
| -111.36 0 |
| 111.36 0 |
| VALUE 0 0 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE 0 0 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-196.85 98.43 -196.85 98.43 |
| T-196.85 -98.43 -196.85 -98.43 |
| T196.85 -98.43 196.85 -98.43 |
| T196.85 98.43 196.85 98.43 |
| PAD 0 5 |
| -2 80 R 45 |
| -1 80 R |
| 0 80 R |
| 21 86 R |
| 22 86 R |
| PUSH050X050 I 0 0 5 4 1 0 2 |
| CIRCLE 2 8 0 |
| 55 0 |
| -55 0 |
| OPEN 2 8 0 |
| -121 45 |
| -121 -45 |
| OPEN 2 8 0 |
| 121 45 |
| 121 -45 |
| OPEN 2 8 0 |
| 112 -121 |
| -112 -121 |
| OPEN 2 8 0 |
| 112 121 |
| -112 121 |
| VALUE -39 220 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -39 220 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-126 85 -126 85 |
| T-126 -85 -126 -85 |
| T126 -85 126 -85 |
| T126 85 126 85 |
| PAD 0 5 |
| -2 65 R 35 |
| -1 65 R |
| 0 65 R |
| 21 71 R |
| 28 71 R |
| DIP14_300 I 0 0 1 14 2 0 2 |
| CLOSED 9 8 0 |
| -100 350 |
| -30 350 |
| -30 290 |
| 30 290 |
| 30 350 |
| 100 350 |
| 100 -350 |
| -100 -350 |
| -100 350 |
| VALUE -59.06 436.88 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 436.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| T-150 300 -150 300 |
| T-150 200 -150 200 |
| T-150 100 -150 100 |
| T-150 0 -150 0 |
| T-150 -100 -150 -100 |
| T-150 -200 -150 -200 |
| T-150 -300 -150 -300 |
| T150 -300 150 -300 |
| T150 -200 150 -200 |
| T150 -100 150 -100 |
| T150 0 150 0 |
| T150 100 150 100 |
| T150 200 150 200 |
| T150 300 150 300 |
| PAD 0 5 |
| -2 60 R 35 |
| -1 60 R |
| 0 60 R |
| 21 66 R |
| 28 66 R |
| PAD 1 5 |
| -2 60 S 35 |
| -1 60 S |
| 0 60 S |
| 21 66 S |
| 28 66 S |
| *PARTTYPE* ITEMS |
| *REMARK* NAME DECALNM UNITS TYPE GATES SIGPINS PINNMS FLAGS ECO |
| *REMARK* G/S SWAPTYPE PINS |
| *REMARK* PIN.SWAPTYPE.PINTYPE.FUNCNAME |
| *REMARK* SIGPIN PIN WIDTH SIGNAME |
| C C0805:C0603:C1206:CK025:CK050:C0805/1206:C1210:C1812:C2220 I CAP 1 0 0 0 Y |
| G 0 2 |
| 1.1.Z 2.1.Z |
| C-ELYT ELYTA:ELYTB:ELYTC:ELYTD:CE020X5:CE025X6:CE035X8:CE050X10:CE050X13:CE075X16:CE075X18:CE020X5/L:CE025X6/L:CE035X8/L:CE050X10/L I CAP 1 0 2 0 Y |
| G 0 2 |
| 1.0.U 2.0.U |
| A C |
| SCW2 ARK210/2 I CON 0 0 0 0 Y |
| ARK210/2 ARK210/2 I CON 0 0 0 0 Y |
| T-CEB TO92:TO92/B:TO92/BSMD:TO92/L:TO39:SOT37:SOT37/SMD I TRX 0 0 4 0 Y |
| C E B 4 |
| R R0805:R0603:R1206:RS025:RL090:RL140:RS040:R1812 I RES 1 0 0 0 Y |
| G 0 2 |
| 1.0.Z 2.0.Z |
| PB4PIN PUSH050X050SMD:PUSH120:PUSH120SQ:P-B1727:PUSH050X050 I SWI 0 0 0 0 Y |
| DIP14_300 DIP14_300 I DIP 0 0 0 0 Y |
| *PART* ITEMS |
| *REMARK* REFNM PTYPENM X Y ORI GLUE MIRROR ALT CLSTID CLSTATTR BROTHERID LABELS |
| *REMARK* .REUSE. INSTANCE RPART |
| *REMARK* VISIBLE XLOC YLOC ORI LEVEL HEIGTH WIDTH MIRRORED HJUST VJUST RIGHTREADING |
| *REMARK* FONTSTYLE FONTFACE |
| C1 C 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -59.06 185.04 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| C2 C-ELYT 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -56 174 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -56 280 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| C3 C 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -59.06 185.04 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| J1 SCW2 0 0 0.000 U N 0 -1 0 -1 2 |
| VALUE -59.06 295.28 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 196.85 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| J2 SCW2 0 0 0.000 U N 0 -1 0 -1 2 |
| VALUE -59.06 295.28 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 196.85 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| M1 ARK210/2 0 0 0.000 U N 0 -1 0 -1 2 |
| VALUE -59.06 295.28 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 196.85 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| Q1 T-CEB 0 0 0.000 U N 0 -1 0 -1 2 |
| VALUE -12 197 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -14 181 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| Q2 T-CEB 0 0 0.000 U N 0 -1 0 -1 2 |
| VALUE -12 197 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -14 181 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R1 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R10 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R11 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R2 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R3 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R4 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R5 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R6 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R7 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R8 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| R9 R 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -51.18 78.74 0.000 1 60 7.87 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| VALUE -59.06 188.98 0.000 1 60 7.87 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| SW1 PB4PIN 0 0 0.000 U N 4 -1 0 -1 2 |
| VALUE -39 220 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -39 220 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| U1 DIP14_300 0 0 0.000 U N 0 -1 0 -1 2 |
| VALUE -59.06 436.88 0.000 1 60 8 N LEFT UP |
| Regular <PADS Stroke Font> |
| Part Type |
| VALUE -59.06 436.88 0.000 1 60 8 N LEFT DOWN |
| Regular <PADS Stroke Font> |
| Ref.Des. |
| *CONNECTION* |
| *REMARK* *SIGNAL* SIGNAME SIGFLAG COLOR |
| *REMARK* REFNM.PIN .REUSE. INSTANCE RSIG REFNM.PIN .REUSE. INSTANCE RSIG |
| *SIGNAL* GND 0 -2 |
| R6.1 C3.2 |
| R11.1 R6.1 |
| R4.1 R11.1 |
| R2.1 R4.1 |
| R2.1 C2.C |
| C2.C M1.2 |
| R10.1 M1.2 |
| U1.11 R10.1 |
| R8.1 U1.11 |
| J1.1 R8.1 |
| *SIGNAL* N00814 0 -2 |
| U1.5 SW1.2 |
| U1.5 R6.2 |
| R6.2 Q2.E |
| C2.A Q2.E |
| *SIGNAL* VCC 0 -2 |
| C3.1 J1.2 |
| SW1.1 C3.1 |
| R3.2 SW1.1 |
| R3.2 R1.2 |
| R1.2 J2.1 |
| U1.4 J2.1 |
| R7.2 U1.4 |
| Q2.C R7.2 |
| *SIGNAL* N02087 0 -2 |
| R5.1 U1.8 |
| *SIGNAL* N02123 0 -2 |
| Q2.B R5.2 |
| *SIGNAL* N02699 0 -2 |
| U1.7 R9.2 |
| *SIGNAL* N01929 0 -2 |
| U1.10 R2.2 |
| R2.2 C1.2 |
| *SIGNAL* N01826 0 -2 |
| R3.1 R4.2 |
| R4.2 U1.9 |
| *SIGNAL* N02014 0 -2 |
| R1.1 C1.1 |
| C1.1 M1.1 |
| *SIGNAL* N02635 0 -2 |
| U1.6 R7.1 |
| R7.1 R8.2 |
| *SIGNAL* N02735 0 -2 |
| R9.1 U1.3 |
| U1.3 R10.2 |
| *SIGNAL* N02885 0 -2 |
| U1.1 Q1.B |
| *SIGNAL* N03786 0 -2 |
| J2.2 Q1.C |
| *SIGNAL* N03815 0 -2 |
| U1.2 Q1.E |
| Q1.E R11.2 |
| *MISC* MISCELLANEOUS PARAMETERS |
| *REMARK* PARENT_KEYWORD PARENT_VALUE |
| *REMARK* [ { |
| *REMARK* CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ CHILD_KEYWORD CHILD_VALUE |
| *REMARK* [ { |
| *REMARK* GRAND_CHILD_KEYWORD GRAND_CHILD_VALUE [...] |
| *REMARK* } ]] |
| *REMARK* } ] |
| RULES_SECTION MILS |
| { |
| NET_CLASS DATA |
| GROUP DATA |
| DESIGN RULES |
| { |
| RULE_SET (1) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| CLEARANCE_RULE : |
| { |
| TRACK_TO_TRACK 6 |
| VIA_TO_TRACK 6 |
| VIA_TO_VIA 6 |
| PAD_TO_TRACK 6 |
| PAD_TO_VIA 6 |
| PAD_TO_PAD 6 |
| SMD_TO_TRACK 6 |
| SMD_TO_VIA 6 |
| SMD_TO_PAD 6 |
| SMD_TO_SMD 6 |
| COPPER_TO_TRACK 6 |
| COPPER_TO_VIA 6 |
| COPPER_TO_PAD 6 |
| COPPER_TO_SMD 6 |
| TEXT_TO_TRACK 6 |
| TEXT_TO_VIA 6 |
| TEXT_TO_PAD 6 |
| TEXT_TO_SMD 6 |
| OUTLINE_TO_TRACK 6 |
| OUTLINE_TO_VIA 6 |
| OUTLINE_TO_PAD 6 |
| OUTLINE_TO_SMD 6 |
| OUTLINE_TO_COPPER 6 |
| DRILL_TO_TRACK 6 |
| DRILL_TO_VIA 6 |
| DRILL_TO_PAD 6 |
| DRILL_TO_SMD 6 |
| DRILL_TO_COPPER 6 |
| SAME_NET_SMD_TO_VIA 6 |
| SAME_NET_SMD_TO_CRN 6 |
| SAME_NET_VIA_TO_VIA 6 |
| SAME_NET_PAD_TO_CRN 6 |
| MIN_TRACK_WIDTH 12 |
| REC_TRACK_WIDTH 12 |
| MAX_TRACK_WIDTH 12 |
| DRILL_TO_DRILL 6 |
| BODY_TO_BODY 6 |
| SAME_NET_TRACK_TO_CRN 0 |
| } |
| } |
| RULE_SET (2) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| HIGH_SPEED_RULE : |
| { |
| MIN_LENGTH 0 |
| MAX_LENGTH 50000 |
| STUB_LENGTH 0 |
| PARALLEL_LENGTH 1000 |
| PARALLEL_GAP 200 |
| TANDEM_LENGTH 1000 |
| TANDEM_GAP 200 |
| MIN_DELAY 0.000000 |
| MAX_DELAY 10.000000 |
| MIN_CAPACITANCE 0.000000 |
| MAX_CAPACITANCE 10.000000 |
| MIN_IMPEDANCE 50.000000 |
| MAX_IMPEDANCE 150.000000 |
| SHIELD_NET * |
| SHIELD_GAP 200 |
| MATCH_LENGTH_TOLERANCE 200 |
| } |
| } |
| RULE_SET (3) |
| { |
| FOR : |
| { |
| DEFAULT : |
| } |
| AGAINST : |
| { |
| DEFAULT : |
| } |
| LAYER 0 |
| ROUTE_RULE : |
| { |
| LENGTH_MINIMIZATION_TYPE 1 |
| VIA_SHARE Y |
| TRACE_SHARE Y |
| AUTO_ROUTE Y |
| RIPUP Y |
| SHOVE Y |
| ROUTE_PRIORITY 3 |
| VALID_LAYER 1 |
| VALID_LAYER 2 |
| VALID_VIA_TYPE STANDARDVIA |
| } |
| } |
| } |
| } |
| *MISC* MISCELLANEOUS PARAMETERS |
| ATTRIBUTES DICTIONARY |
| { |
| ATTRIBUTE Value |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Tolerance |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Part Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Description |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Cost |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE Manufacturer #2 |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM N |
| HIDDEN N |
| } |
| ATTRIBUTE PowerGround |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Voltage |
| { |
| TYPE QUANTITY |
| QUANTITY Voltage |
| ABBR V |
| UNIT Volt |
| MIN -100kV |
| MAX 100kV |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Geometry.Height |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 25000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART PARTTYPE DECAL |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Count Per Net |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 1000 |
| INHERITANCE NET NETCLASS PCB |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Diameter |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE DFT.Nail Number |
| { |
| TYPE FREETEXT N |
| INHERITANCE PIN |
| INHERITANCE VIA |
| ECO_REGISTRATION N |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE PART PARTTYPE |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Sim Direction |
| { |
| TYPE LIST N |
| { |
| SIM_BOTH |
| SIM_IN |
| SIM_OUT |
| } |
| INHERITANCE PIN |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Frequency |
| { |
| TYPE QUANTITY |
| QUANTITY Frequency |
| ABBR Hz |
| UNIT Hertz |
| MIN 0Hz |
| MAX 1000GHz |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Duty Cycle |
| { |
| TYPE QUANTITY |
| QUANTITY |
| ABBR % |
| UNIT percent |
| MIN 0% |
| MAX 100% |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Signal Type |
| { |
| TYPE LIST N |
| { |
| Address |
| Analog High Speed |
| Analog Low Speed |
| Clock |
| Data |
| Do Not Analyze |
| Power Supply |
| Strobe |
| } |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model File |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE HyperLynx.Default IC.Model Pin |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| ECO_REGISTRATION Y |
| READONLY N |
| SYSTEM Y |
| HIDDEN N |
| } |
| ATTRIBUTE Strategy.Fanout.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Fanout.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Patterns.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Route.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Optimize.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Miters.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.TestPoint.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Center.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pass |
| { |
| TYPE LIST N |
| { |
| No |
| Yes |
| Done |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Protect |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Pause |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Intensity |
| { |
| TYPE LIST N |
| { |
| Low |
| Medium |
| High |
| } |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.PlanePriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.Priority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PART |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.DiffPairPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET |
| INHERITANCE PINPAIR |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Strategy.Tune.MLGPriority |
| { |
| TYPE INTEGER |
| MIN 0 |
| INHERITANCE NET NETCLASS PCB |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.FormatId |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipWidth |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.ChipHeight |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MinLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxLength |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WToWDistance |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.WBtoPad |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBRules.MaxAngle |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBP1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WBCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.WB1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuideCount |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.SBPGuide1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE DIE.CBPAssignment1 |
| { |
| TYPE FREETEXT N |
| INHERITANCE DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Marker_Shape |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_NumberPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_AngularPrecision |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Suffix |
| { |
| TYPE FREETEXT N |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Text_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Line_Layer |
| { |
| TYPE INTEGER |
| MIN 0 |
| MAX 250 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE AutoDimensioning.Preview_Type |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 5 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Side |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Corner |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.AnyAngle |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.PadEntry.Soft |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.FitInside |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Center |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.ViaAtSMD.Ends |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment |
| { |
| TYPE LIST N |
| { |
| Aligned |
| Alternate |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Alignment.Multi-Row |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Direction |
| { |
| TYPE LIST N |
| { |
| Inside |
| Outside |
| Both Sides |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.ViaSpacing |
| { |
| TYPE LIST N |
| { |
| Use Grid |
| 1 Trace |
| 2 Trace |
| } |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Pin |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.SMD |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Via |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Sharing.Trace |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Plane |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.Signal |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Nets.UnusedPins |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Unlimited |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Fanout.Length.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 2000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Trace.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Pad.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.SMD.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Copper.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Text.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Board.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Trace |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.Pad |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Clearance.Drill.SMD |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.SMD.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Via.Via |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Pad.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.SameNet.Trace.Crn |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 1000.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Minimum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 250.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Recommended |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 250.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Rules.Width.Maximum |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 250.00mil |
| INHERITANCE PCB |
| INHERITANCE PART DECAL |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Use |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.X |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 2000.00mil |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Placement.Grid.Y |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 2000.00mil |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Amplitude.Min |
| { |
| TYPE INTEGER |
| MIN 3 |
| MAX 30 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Accordion.Gap.Min |
| { |
| TYPE INTEGER |
| MIN 1 |
| MAX 10 |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MaxChannelWidth |
| { |
| TYPE QUANTITY |
| QUANTITY Size/Dimension |
| ABBR |
| UNIT |
| MIN 0.00mil |
| MAX 10000.00mil |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.SoftLengthRrules |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Routing.MeanderBeforeTune |
| { |
| TYPE BOOLEAN |
| INHERITANCE PCB |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE MatchLength.Name |
| { |
| TYPE FREETEXT N |
| INHERITANCE NET NETCLASS |
| INHERITANCE PINPAIR GROUP |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Planning.Scheduled |
| { |
| TYPE BOOLEAN |
| INHERITANCE NET |
| ECO_REGISTRATION Y |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Library.Timestamp |
| { |
| TYPE FREETEXT N |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| ATTRIBUTE Design.Timestamp |
| { |
| TYPE FREETEXT N |
| ECO_REGISTRATION N |
| READONLY Y |
| SYSTEM Y |
| HIDDEN Y |
| } |
| } |
| ATTRIBUTE VALUES |
| { |
| PART C1 |
| { |
| Value CK050 |
| } |
| PART C2 |
| { |
| Value 47UF |
| } |
| PART C3 |
| { |
| Value 100NF |
| } |
| PART J1 |
| { |
| Value POWER |
| } |
| PART J2 |
| { |
| Value ARK210/2 |
| } |
| PART M1 |
| { |
| Value MIKE |
| } |
| PART Q1 |
| { |
| Value BC547 |
| } |
| PART Q2 |
| { |
| Value BC547 |
| } |
| PART R1 |
| { |
| Value 15K |
| } |
| PART R10 |
| { |
| Value 10K |
| } |
| PART R11 |
| { |
| Value 18 |
| } |
| PART R2 |
| { |
| Value M1 |
| } |
| PART R3 |
| { |
| Value 22K |
| } |
| PART R4 |
| { |
| Value 5K6 |
| } |
| PART R5 |
| { |
| Value 6K8 |
| } |
| PART R6 |
| { |
| Value 1M |
| } |
| PART R7 |
| { |
| Value M39 |
| } |
| PART R8 |
| { |
| Value M1 |
| } |
| PART R9 |
| { |
| Value M1 |
| } |
| PART SW1 |
| { |
| Value PUSH050X050 |
| } |
| PART U1 |
| { |
| Value LM124 |
| } |
| DECAL C0805 |
| { |
| Description keramicky kondenzator SMD velikost 0805 |
| Geometry.Height 1.5mm |
| Value ??? |
| } |
| DECAL C0603 |
| { |
| Description keramicky kondenzator SMD velikost 0603 |
| Geometry.Height 1.5mm |
| Value ??? |
| } |
| DECAL C1206 |
| { |
| Description keramicky kondenzator SMD velikost 1206 |
| Geometry.Height 1.5mm |
| Value ??? |
| } |
| DECAL CK025 |
| { |
| Description kramicky kondenzator roztec 2.54 mm ,100 mils |
| Geometry.Height 8mm |
| Value ??? |
| } |
| DECAL CK050 |
| { |
| Description keramicky kondenzator roztec 5,08 mm ,200 mils |
| Geometry.Height 8mm |
| Value ??? |
| } |
| DECAL C0805/1206 |
| { |
| Description univerzalni plosky pro C0805 a C1206 |
| Geometry.Height 1.50000mm |
| Value ??? |
| } |
| DECAL C1210 |
| { |
| Description keramicky kondenzator SMD velikost 1210 |
| Geometry.Height 2mm |
| Value ??? |
| } |
| DECAL C1812 |
| { |
| Description keramicky kondenzator SMD velikost 1812 |
| Geometry.Height 2mm |
| Value ??? |
| } |
| DECAL C2220 |
| { |
| Description keramicky kondenzator SMD velikost 2220 |
| Geometry.Height 2mm |
| Value ??? |
| } |
| DECAL ELYTA |
| { |
| Description elektrolyt SMD velikost A |
| Geometry.Height 1.8 mm |
| Value ??? |
| } |
| DECAL ELYTB |
| { |
| Description elektrolyt SMD velikost B |
| Geometry.Height 2 mm |
| Value ??? |
| } |
| DECAL ELYTC |
| { |
| Description elektrolyt SMD velikost C |
| Geometry.Height 2.8 mm |
| Value ??? |
| } |
| DECAL ELYTD |
| { |
| Description elektrolyt SMD velikost D |
| Geometry.Height 3 mm |
| Value ??? |
| } |
| DECAL CE020X5 |
| { |
| Description Elyt prumer 5mm, roztec 2.032mm - 80 mils |
| Geometry.Height 12 mm |
| Value ??? |
| } |
| DECAL CE025X6 |
| { |
| Description Elyt prumer 6.3mm, roztec 2.54mm - 100 mils |
| Geometry.Height 12 mm |
| Value ??? |
| } |
| DECAL CE035X8 |
| { |
| Description Elyt prumer 8 mm, roztec3.505 mm - 138 mils |
| Geometry.Height 12 mm |
| Value ??? |
| } |
| DECAL CE050X10 |
| { |
| Description Elyt prumer 10mm, roztec 5.08mm - 200 mils |
| Geometry.Height 17 mm |
| Value ??? |
| } |
| DECAL CE050X13 |
| { |
| Description Elyt prumer 13mm, roztec 5.08mm - 200 mils |
| Geometry.Height 27 mm |
| Value ??? |
| } |
| DECAL CE075X16 |
| { |
| Description Elyt prumer 16mm, roztec 7.5mm - 300 mils |
| Geometry.Height 26 mm |
| Value ??? |
| } |
| DECAL CE075X18 |
| { |
| Description Elyt prumer 18mm, roztec 7.5mm - 300 mils |
| Geometry.Height 43 mm |
| Value ??? |
| } |
| DECAL CE020X5/L |
| { |
| Description Elyt prumer 5mm na lezato, roztec 2.032mm - 80 mils |
| Geometry.Height 5.5 mm |
| Value ??? |
| } |
| DECAL CE025X6/L |
| { |
| Description Elyt prumer 6.3mm na lezato, roztec 2.54mm - 100 mils |
| Geometry.Height 6.5 mm |
| Value ??? |
| } |
| DECAL CE035X8/L |
| { |
| Description Elyt prumer 8 mm na lezato, roztec3.505 mm - 138 mils |
| Geometry.Height 8.5 mm |
| Value ??? |
| } |
| DECAL CE050X10/L |
| { |
| Description Elyt prumer 10mm na lezato, roztec 5.08mm - 200 mils |
| Geometry.Height 10.5 mm |
| Value ??? |
| } |
| DECAL ARK210/2 |
| { |
| Description svorkovnice se dvema piny, roztec 5.08 mm - 200 mils |
| Geometry.Height 13 mm |
| Value ??? |
| } |
| DECAL TO92 |
| { |
| Description tranzistorove pouzdro TO92, kolektor uprostred |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO92/B |
| { |
| Description TO92, kolektor uprostred, pro bastleni |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO92/BSMD |
| { |
| Description TO92, kolektor uprostred, vyvody v jedne rade |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO92/L |
| { |
| Description TO92, kolektor uprostred, vyvody v jedne rade |
| Geometry.Height 10mm |
| Value ??? |
| } |
| DECAL TO39 |
| { |
| Description velke kovove pouzdro TO39 |
| Geometry.Height 10 mm |
| } |
| DECAL SOT37 |
| { |
| Description pouzdro pro tranzistory BFR... |
| Geometry.Height 2.5 mm |
| } |
| DECAL SOT37/SMD |
| { |
| Description pouzdro pro tranzistory BFR... montaz SMD |
| Geometry.Height 2.5 mm |
| } |
| DECAL R0805 |
| { |
| Description rezistor SMD velikost 0805 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL R0603 |
| { |
| Description rezistor SMD velikost 0603 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL R1206 |
| { |
| Description rezistor SMD velikost 1206 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL RS025 |
| { |
| Description bezny rezistor nastojato roztec 2,54 mm, 100 mils |
| Geometry.Height 9 mm |
| Value ??? |
| } |
| DECAL RL090 |
| { |
| Description bezny rezistor roztec 8.89mm, 350mils |
| Geometry.Height 3mm |
| Value ??? |
| } |
| DECAL RL140 |
| { |
| Description rezistor 2W nalezato roztec 13.97mm, 550mils |
| Geometry.Height 4.6mm |
| Value ??? |
| } |
| DECAL RS040 |
| { |
| Description rezistor 2W nastojato, roztec 3.81 mm ,150 mils |
| Geometry.Height 15mm |
| Value ??? |
| } |
| DECAL R1812 |
| { |
| Description rezistor SMD velikost 1812 |
| Geometry.Height 1mm |
| Value ??? |
| } |
| DECAL PUSH050X050SMD |
| { |
| Description ctvercove SMD spinaci tlacitko , vyvody 1-4 a 2-3 propojeny |
| Geometry.Height 5.00000mm |
| Value ??? |
| } |
| DECAL PUSH120 |
| { |
| Description Kulate tlacitko s vyvody v rosteci 5x5mm |
| Geometry.Height 8 mm |
| } |
| DECAL PUSH120SQ |
| { |
| Description Kulate tlacitko s vyvody v rastru 5x5mm s hranatym hmatnikem |
| Geometry.Height 8 mm |
| } |
| DECAL P-B1727 |
| { |
| Description hranate tlacitko 10x10mm |
| Geometry.Height 8 mm |
| } |
| DECAL PUSH050X050 |
| { |
| Description ctvercove spinaci tlacitko , vyvody 1-4 a 2-3 propojeny |
| Geometry.Height 5.00000mm |
| } |
| DECAL DIP14_300 |
| { |
| Description pozdro DIP14 roztec 7.62 mm - 300 mils |
| Geometry.Height 6 mm |
| Value ??? |
| } |
| PARTTYPE C |
| { |
| Description ruzne druhy kondenzatoru |
| Value ??? |
| } |
| PARTTYPE C-ELYT |
| { |
| Description ruzne druhy elektrolytickych kondenzatoru |
| Value ??? |
| } |
| PARTTYPE T-CEB |
| { |
| Description Tanzistory s poradim nozicek 1=C 2-E 3=B |
| Value ??? |
| } |
| PARTTYPE R |
| { |
| Description rezistory ruznych typu |
| Value ??? |
| } |
| PARTTYPE DIP14_300 |
| { |
| Value ??? |
| } |
| PCB DEFAULT |
| { |
| Accordion.Amplitude.Min 3 |
| Accordion.Gap.Min 1 |
| AutoDimensioning.Line_Layer 24 |
| AutoDimensioning.Marker_Shape YYNNNY |
| AutoDimensioning.Preview_Type 1 |
| AutoDimensioning.Text_AngularPrecision 0 0 0 |
| AutoDimensioning.Text_Layer 24 |
| AutoDimensioning.Text_NumberPrecision 0 1 2 |
| AutoDimensioning.Text_Suffix mil##mm##" |
| Placement.Grid.Use No |
| Placement.Grid.X 100.00mil |
| Placement.Grid.Y 100.00mil |
| Routing.MaxChannelWidth 100.00mil |
| Routing.MeanderBeforeTune No |
| Routing.SoftLengthRrules Yes |
| Rules.ViaAtSMD No |
| Rules.Fanout.Alignment Alternate |
| Rules.Fanout.Direction Both Sides |
| Rules.Fanout.ViaSpacing Use Grid |
| Rules.Fanout.Alignment.Multi-Row Yes |
| Rules.Fanout.Length.Maximum 250.00mil |
| Rules.Fanout.Length.Unlimited Yes |
| Rules.Fanout.Nets.Plane Yes |
| Rules.Fanout.Nets.Signal No |
| Rules.Fanout.Nets.UnusedPins No |
| Rules.Fanout.Sharing.Pin Yes |
| Rules.Fanout.Sharing.SMD Yes |
| Rules.Fanout.Sharing.Trace Yes |
| Rules.Fanout.Sharing.Via Yes |
| Rules.PadEntry.AnyAngle Yes |
| Rules.PadEntry.Corner Yes |
| Rules.PadEntry.Side Yes |
| Rules.PadEntry.Soft Yes |
| Rules.ViaAtSMD.Center Yes |
| Rules.ViaAtSMD.Ends Yes |
| Rules.ViaAtSMD.FitInside Yes |
| } |
| } |
| *END* OF ASCII OUTPUT FILE |
| /schemata/lego/light/LIGHT_SENSOR.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/lego/light/LIGHT_SENSOR.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/lego/light/light_sensor.opj |
|---|
| 0,0 → 1,91 |
| (ExpressProject "light_sensor" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\light_sensor.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (PS9701 |
| (FullPartName "PS9701.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (OPL550 |
| (FullPartName "OPL550.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (OPI8015 |
| (FullPartName "OPI8015.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (OPI123 |
| (FullPartName "OPI123.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (OPI120 |
| (FullPartName "OPI120.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (OPF2414T |
| (FullPartName "OPF2414T.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (MOC71 |
| (FullPartName "MOC71.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (MFOD3510 |
| (FullPartName "MFOD3510.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (HCPL2630 |
| (FullPartName "HCPL2630.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (H11L1 |
| (FullPartName "H11L1.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_OPTO.OLB") |
| (DeviceIndex "0")) |
| (OPTRON |
| (FullPartName "OPTRON.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_OPTO.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\lego\light\light_sensor.dsn") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\lego\light\light_sensor.dsn" "SCHEMATIC1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 87 287 19 320")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library")) |
| /schemata/lego/light/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/lego/rotation/output.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/lego/rotation/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/lego/temperature/output.bmp |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/lego/temperature/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/GMcounter/GMCOUNTER.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/GMcounter/GMCOUNTER.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/GMcounter/GMcounter.opj |
|---|
| 0,0 → 1,47 |
| (ExpressProject "GMcounter" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\gmcounter.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (DB9M |
| (FullPartName "DB9M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (PIC16F873/876 |
| (FullPartName "PIC16F873/876.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\MPC.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\mereni\GMcounter\gmcounter.dsn") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\mereni\GMcounter\gmcounter.dsn" "SCHEMATIC1") |
| (Select "Design Resources" |
| "D:\KAKLIK\schemata\mereni\GMcounter\gmcounter.dsn" "SCHEMATIC1" |
| "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -30 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 44 914 58 495") |
| (Scroll "0 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\KAKLIK\SCHEMATA\MERENI\GMCOUNTER\GMCOUNTER.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/mereni/IRmrak/IRMRAK.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/IRMRAK.DRC |
|---|
| 0,0 → 1,13 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking for Invalid References |
| Checking for Duplicate References |
| /schemata/mereni/IRmrak/IRMRAK.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/IRMRAK.ONL |
|---|
| 0,0 → 1,749 |
| (PCB IRMRAK |
| (description |
| (timeStamp "2006 03 25 12 51 13") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "IRmrak") |
| (date "Saturday, March 25, 2006") |
| (document "H:\\IRMRAK\\IRMRAK.DSN") |
| (revision "2") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device},{Value}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component D |
| (place D10 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 0000B1F9) |
| ("Source Package" D) |
| (Value Si))) |
| (place D9 |
| (property |
| ("PCB Footprint" MINIMELF) |
| (Device D) |
| (timestamp 0000003D) |
| ("Source Package" D) |
| (Value Si)))) |
| (component MAX232 |
| (place U2 |
| (property |
| ("PCB Footprint" SO16_150) |
| (Device SO16_150) |
| (timestamp 00009199) |
| ("Source Package" MAX232) |
| (Value MAX232SMD)))) |
| (component CK050 |
| (place C9 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 00001972) |
| ("Source Package" CK050) |
| (Value 100nF))) |
| (place C11 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 00008273) |
| ("Source Package" CK050) |
| (Value 100nF)))) |
| (component ARK210/2 |
| (place J11 |
| (property |
| ("PCB Footprint" ARK210/2) |
| (Device SCW2) |
| (timestamp 000128F6) |
| ("Source Package" ARK210/2) |
| (Value Heating))) |
| (place J13 |
| (property |
| ("PCB Footprint" ARK210/2) |
| (Device SCW2) |
| (timestamp 00012922) |
| ("Source Package" ARK210/2) |
| (Value "Power Source")))) |
| (component UNIPAD2 |
| (place J10 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00014BBA) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J1 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00002573) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J2 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 0000269B) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J3 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 000026A0) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J4 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 0000BB59) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J5 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00014B2A) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J6 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00014B3F) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J7 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00014B52) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J8 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00014B8B) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2))) |
| (place J9 |
| (property |
| ("PCB Footprint" UNIPAD2) |
| (Device UNIPAD2) |
| (timestamp 00014BA5) |
| ("Source Package" UNIPAD2) |
| (Value UNIPAD2)))) |
| (component LM78xxT_TO220 |
| (place U4 |
| (property |
| ("PCB Footprint" TO220) |
| (Device TO220) |
| (timestamp 000002B8) |
| ("Source Package" LM78xxT_TO220) |
| (Value 7805)))) |
| (component ARK210/3 |
| (place J12 |
| (property |
| ("PCB Footprint" ARK210/3) |
| (Device SCW3) |
| (timestamp 0001301A) |
| ("Source Package" ARK210/3) |
| (Value "IR thermometer"))) |
| (place J14 |
| (property |
| ("PCB Footprint" ARK210/3) |
| (Device SCW3) |
| (timestamp 00012A1F) |
| ("Source Package" ARK210/3) |
| (Value RS232)))) |
| (component "C-ELYT-CE020X5" |
| (place C8 |
| (property |
| ("PCB Footprint" CE050X10) |
| (Device "C-ELYT") |
| (timestamp 00001892) |
| ("Source Package" "C-ELYT-CE020X5") |
| (Value 2G/16V))) |
| (place C10 |
| (property |
| ("PCB Footprint" ELYTB) |
| (Device "C-ELYT") |
| (timestamp 000082C3) |
| ("Source Package" "C-ELYT-CE020X5") |
| (Value 4.7uF/6.3V/tantal)))) |
| (component PIC_ISP |
| (place J0 |
| (property |
| ("PCB Footprint" PIC_ISP) |
| (Device PIC_ISP) |
| (timestamp 000001AE) |
| ("Source Package" PIC_ISP) |
| (Value PIC_ISP)))) |
| (component R0805 |
| (place R1 |
| (property |
| ("PCB Footprint" R0805) |
| (Device R) |
| (timestamp 000094A1) |
| ("Source Package" R0805) |
| (Value M1))) |
| (place R2 |
| (property |
| ("PCB Footprint" R0805) |
| (Device R) |
| (timestamp 000094B9) |
| ("Source Package" R0805) |
| (Value M1)))) |
| (component _PIC16F83_84_84A__18_PIN_0 |
| (place U1 |
| (property |
| ("PCB Footprint" SO18_300) |
| (Device SO18_300) |
| (timestamp 00001C8C) |
| ("Source Package" _PIC16F83_84_84A__18_PIN_0) |
| (Value PIC16F84)))) |
| (component C0805 |
| (place C1 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 000090E9) |
| ("Source Package" C0805) |
| (Value 100nF))) |
| (place C2 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 000090B9) |
| ("Source Package" C0805) |
| (Value 100nF))) |
| (place C3 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 00009145) |
| ("Source Package" C0805) |
| (Value 100nF))) |
| (place C4 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 000091BD) |
| ("Source Package" C0805) |
| (Value 100nF)))) |
| (component LM78LxxZ_TO92 |
| (place U6 |
| (property |
| ("PCB Footprint" TO92/B) |
| (Device TO92) |
| (timestamp 000138A0) |
| ("Source Package" LM78LxxZ_TO92) |
| (Value LM78L02Z)))) |
| (component HOLE_M3 |
| (place M1 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device PAD) |
| (timestamp 000127D8) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M2 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device PAD) |
| (timestamp 000127EA) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M3 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device PAD) |
| (timestamp 000127FC) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3))) |
| (place M4 |
| (property |
| ("PCB Footprint" HOLE_M3) |
| (Device PAD) |
| (timestamp 0001280E) |
| ("Source Package" HOLE_M3) |
| (Value HOLE_M3)))) |
| (component BS170SMD |
| (place Q1 |
| (property |
| ("PCB Footprint" SO8_FET) |
| (Device SO8_FET) |
| (timestamp 0000BBF5) |
| ("Source Package" BS170SMD) |
| (Value IRF7413SMD)))) |
| (component "C-ELYTB" |
| (place C13 |
| (property |
| ("PCB Footprint" ELYTB) |
| (Device "C-ELYT") |
| (timestamp 00011F6C) |
| ("Source Package" "C-ELYTB") |
| (Value 4.7uF/6.3V/tantal))) |
| (place C14 |
| (property |
| ("PCB Footprint" ELYTB) |
| (Device "C-ELYT") |
| (timestamp 0000F271) |
| ("Source Package" "C-ELYTB") |
| (Value 4.7uF/6.3V/tantal))) |
| (place C15 |
| (property |
| ("PCB Footprint" ELYTB) |
| (Device "C-ELYT") |
| (timestamp 00015219) |
| ("Source Package" "C-ELYTB") |
| (Value 4.7uF/6.3V/tantal))))) |
| (library |
| (image _PIC16F83_84_84A__18_PIN_0 |
| (property |
| (sourcelib D:\\MLAB\\PIC16F84\\PIC16F~1\\SCH\\PIC16F~1.DSN) |
| (Device PIC16F83_84_84A__18_PIN)) |
| (pin 999 1 |
| (property |
| (pinname RA2) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname RA3) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname RA4/T0CKI) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname MCLR#) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname GND) |
| (pintype 7))) |
| (pin 999 6 |
| (property |
| (pinname RB0/INT) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname RB1) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname RB2) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname RB3) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname RB4) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname RB5) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname PGC/RB6) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname PGD/RB7) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname VDD) |
| (pintype 7))) |
| (pin 999 15 |
| (property |
| (pinname CLKOUT/OSC2) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname CLKIN/OSC1) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname RA0) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname RA1) |
| (pintype 4)))) |
| (image MAX232 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\MAXIM\\MAXIM.OLB)) |
| (pin 999 1 |
| (property |
| (pinname C1+) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname M+) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname "C1-") |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname C2+) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname "C2-") |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname T1IN) |
| (pintype 0))) |
| (pin 999 10 |
| (property |
| (pinname T2IN) |
| (pintype 0))) |
| (pin 999 12 |
| (property |
| (pinname R1OUT) |
| (pintype 2))) |
| (pin 999 9 |
| (property |
| (pinname R2OUT) |
| (pintype 2))) |
| (pin 999 6 |
| (property |
| (pinname "M-") |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname T1OUT) |
| (pintype 2))) |
| (pin 999 7 |
| (property |
| (pinname T2OUT) |
| (pintype 2))) |
| (pin 999 13 |
| (property |
| (pinname R1IN) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname R2IN) |
| (pintype 0))) |
| (pin 999 16 |
| (property |
| (pinname VCC) |
| (pintype 7))) |
| (pin 999 15 |
| (property |
| (pinname GND) |
| (pintype 7)))) |
| (image R0805 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image LM78xxT_TO220 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\POWER.OLB) |
| (Device TO220)) |
| (pin 999 1 |
| (property |
| (pinname IN) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname OUT) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname GND) |
| (pintype 4)))) |
| (image LM78LxxZ_TO92 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\POWER.OLB) |
| (Device TO92)) |
| (pin 999 2 |
| (property |
| (pinname IN) |
| (pintype 4))) |
| (pin 999 1 |
| (property |
| (pinname OUT) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname GND) |
| (pintype 4)))) |
| (image UNIPAD2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\PAD.OLB) |
| (Device UNIPAD2)) |
| (pin 999 1 |
| (property |
| (pinname X) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname X) |
| (pintype 4)))) |
| (image C0805 |
| (property |
| (sourcelib \\\\MIHOCAD\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ARK210/2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device SCW2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ARK210/3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device SCW3)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image "C-ELYT-CE020X5" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device "C-ELYT")) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CK050 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image HOLE_M3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\PAD.OLB) |
| (Device PAD)) |
| (pin 999 1 |
| (property |
| (pinname PIN) |
| (pintype 4)))) |
| (image PIC_ISP |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\MICROCHIP\\CPU_PIC_FLASH.OLB) |
| (Device PIC_ISP)) |
| (pin 999 1 |
| (property |
| (pinname PGC) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname PGD) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname VDD) |
| (pintype 7))) |
| (pin 999 5 |
| (property |
| (pinname GND) |
| (pintype 7))) |
| (pin 999 6 |
| (property |
| (pinname MCLR#/VPP) |
| (pintype 4)))) |
| (image D |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image "C-ELYTB" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device "C-ELYT")) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image BS170SMD |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_T.OLB) |
| (Device "T-FET-GSD")) |
| (pin 999 D |
| (property |
| (pinname D) |
| (pintype 4))) |
| (pin 999 G |
| (property |
| (pinname G) |
| (pintype 0))) |
| (pin 999 S |
| (property |
| (pinname S) |
| (pintype 4))))) |
| (network |
| (net N00520 |
| (pins |
| J0-6 U1-4)) |
| (net VDD |
| (property |
| (nettype S)) |
| (pins |
| U6-1 C11-1 J12-1 C13-A)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| U4-3 C9-2 C11-2 U6-3 R2-1 Q1-S U2-15 C8-C J0-5 |
| C4-1 U1-5 C10-C M2-1 M4-1 M3-1 M1-1 J14-2 J13-2 |
| J12-2 C13-C C14-C C15-C)) |
| (net N00789 |
| (pins |
| D10-C C8-A U4-1)) |
| (net TXD |
| (pins |
| U1-15 U2-10 U2-11)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| U2-16 U4-2 C3-2 J0-3 C9-1 C10-A U6-2 U1-14 C14-A |
| C15-A)) |
| (net 12V |
| (property |
| (nettype S)) |
| (pins |
| D10-A J13-1 J11-1)) |
| (net RB2 |
| (pins |
| J6-1 J6-2 U1-8)) |
| (net RXD |
| (pins |
| U1-16 U2-12)) |
| (net RA0 |
| (pins |
| D9-C U1-17 R2-2)) |
| (net RB0 |
| (pins |
| J4-1 J4-2 U1-6)) |
| (net RB3 |
| (pins |
| U1-9 Q1-G)) |
| (net RB6 |
| (pins |
| U1-12 J0-1 J8-1 J8-2)) |
| (net RA1 |
| (pins |
| U1-18 R1-1 D9-A)) |
| (net RB5 |
| (pins |
| U1-11 J9-1 J9-2)) |
| (net RB7 |
| (pins |
| U1-13 J0-2 J7-1 J7-2)) |
| (net RA4 |
| (pins |
| J3-1 J3-2 U1-3)) |
| (net RB4 |
| (pins |
| U1-10 J10-1 J10-2)) |
| (net RB1 |
| (pins |
| J5-1 J5-2 U1-7)) |
| (net RA3 |
| (pins |
| J2-1 J2-2 U1-2)) |
| (net RA2 |
| (pins |
| J1-1 J1-2 U1-1)) |
| (net N38652 |
| (pins |
| R1-2 J12-3)) |
| (net N48320 |
| (pins |
| Q1-D J11-2)) |
| (net N37147 |
| (pins |
| C2-1 U2-5)) |
| (net N76617 |
| (pins |
| U2-14 J14-1)) |
| (net N54155 |
| (pins |
| C2-2 U2-4)) |
| (net N54153 |
| (pins |
| C1-2 U2-1)) |
| (net N76674 |
| (pins |
| U2-13 J14-3)) |
| (net N371890 |
| (pins |
| U2-2 C3-1)) |
| (net N372739 |
| (pins |
| U2-6 C4-2)) |
| (net N37139 |
| (pins |
| U2-3 C1-1))) |
| ) |
| /schemata/mereni/IRmrak/IRMRAK.asc |
|---|
| 0,0 → 1,109 |
| *PADS-PCB* |
| *PART* |
| C1 C,100nF@C0805 |
| C10 C-ELYT,4.7uF/6.3V/tantal@ELYTB |
| C11 C,100nF@C0805 |
| C13 C-ELYT,4.7uF/6.3V/tantal@ELYTB |
| C14 C-ELYT,4.7uF/6.3V/tantal@ELYTB |
| C15 C-ELYT,4.7uF/6.3V/tantal@ELYTB |
| C2 C,100nF@C0805 |
| C3 C,100nF@C0805 |
| C4 C,100nF@C0805 |
| C8 C-ELYT,2G/16V@CE050X10 |
| C9 C,100nF@C0805 |
| D10 D,Si@DO41 |
| D9 D,Si@MINIMELF |
| J0 PIC_ISP,PIC_ISP@PIC_ISP |
| J1 UNIPAD2,UNIPAD2@UNIPAD2 |
| J10 UNIPAD2,UNIPAD2@UNIPAD2 |
| J11 SCW2,Heating@ARK210/2 |
| J12 SCW3,IR thermometer@ARK210/3 |
| J13 SCW2,Power Source@ARK210/2 |
| J14 SCW3,RS232@ARK210/3 |
| J2 UNIPAD2,UNIPAD2@UNIPAD2 |
| J3 UNIPAD2,UNIPAD2@UNIPAD2 |
| J4 UNIPAD2,UNIPAD2@UNIPAD2 |
| J5 UNIPAD2,UNIPAD2@UNIPAD2 |
| J6 UNIPAD2,UNIPAD2@UNIPAD2 |
| J7 UNIPAD2,UNIPAD2@UNIPAD2 |
| J8 UNIPAD2,UNIPAD2@UNIPAD2 |
| J9 UNIPAD2,UNIPAD2@UNIPAD2 |
| M1 PAD,HOLE_M3@HOLE_M3 |
| M2 PAD,HOLE_M3@HOLE_M3 |
| M3 PAD,HOLE_M3@HOLE_M3 |
| M4 PAD,HOLE_M3@HOLE_M3 |
| Q1 SO8_FET,IRF7413SMD@SO8_FET |
| R1 R,M1@R0805 |
| R2 R,M1@R0805 |
| U1 SO18_300,PIC16F84@SO18_300 |
| U2 SO16_150,MAX232SMD@SO16_150 |
| U4 TO220,7805@TO220 |
| U6 TO92,LM78L02Z@TO92/B |
| *NET* |
| *SIGNAL* N00520 |
| J0.6 U1.4 |
| *SIGNAL* VDD |
| U6.1 C11.1 J12.1 C13.A |
| *SIGNAL* GND |
| U4.3 C9.2 C11.2 U6.3 R2.1 Q1.S U2.15 C8.C |
| J0.5 C4.1 U1.5 C10.C M2.1 M4.1 M3.1 M1.1 |
| J14.2 J13.2 J12.2 C13.C C14.C C15.C |
| *SIGNAL* N00789 |
| D10.C C8.A U4.1 |
| *SIGNAL* TXD |
| U1.15 U2.10 U2.11 |
| *SIGNAL* VCC |
| U2.16 U4.2 C3.2 J0.3 C9.1 C10.A U6.2 U1.14 |
| C14.A C15.A |
| *SIGNAL* 12V |
| D10.A J13.1 J11.1 |
| *SIGNAL* RB2 |
| J6.1 J6.2 U1.8 |
| *SIGNAL* RXD |
| U1.16 U2.12 |
| *SIGNAL* RA0 |
| D9.C U1.17 R2.2 |
| *SIGNAL* RB0 |
| J4.1 J4.2 U1.6 |
| *SIGNAL* RB3 |
| U1.9 Q1.G |
| *SIGNAL* RB6 |
| U1.12 J0.1 J8.1 J8.2 |
| *SIGNAL* RA1 |
| U1.18 R1.1 D9.A |
| *SIGNAL* RB5 |
| U1.11 J9.1 J9.2 |
| *SIGNAL* RB7 |
| U1.13 J0.2 J7.1 J7.2 |
| *SIGNAL* RA4 |
| J3.1 J3.2 U1.3 |
| *SIGNAL* RB4 |
| U1.10 J10.1 J10.2 |
| *SIGNAL* RB1 |
| J5.1 J5.2 U1.7 |
| *SIGNAL* RA3 |
| J2.1 J2.2 U1.2 |
| *SIGNAL* RA2 |
| J1.1 J1.2 U1.1 |
| *SIGNAL* N38652 |
| R1.2 J12.3 |
| *SIGNAL* N48320 |
| Q1.D J11.2 |
| *SIGNAL* N37147 |
| C2.1 U2.5 |
| *SIGNAL* N76617 |
| U2.14 J14.1 |
| *SIGNAL* N54155 |
| C2.2 U2.4 |
| *SIGNAL* N54153 |
| C1.2 U2.1 |
| *SIGNAL* N76674 |
| U2.13 J14.3 |
| *SIGNAL* N371890 |
| U2.2 C3.1 |
| *SIGNAL* N372739 |
| U2.6 C4.2 |
| *SIGNAL* N37139 |
| U2.3 C1.1 |
| *END* |
| /schemata/mereni/IRmrak/IRMRAK.eco |
|---|
| 0,0 → 1,18 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Sat Mar 25 17:49:09 2006 |
| *PART* |
| M5 PAD |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *SET_ATTRIBUTE* PART M5 |
| "Value" HOLE_M3 |
| *NET* |
| *SIGNAL* 12V 25 |
| J11.1 M5.1 |
| *END* |
| /schemata/mereni/IRmrak/IRMRAK.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/IRMRAK_blz.eco |
|---|
| 0,0 → 1,28 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- IRMRAK_blz.pcb -- Sun Mar 26 12:49:59 2006 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- IRMRAK_blz.pcb -- Sun Mar 26 12:53:56 2006 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- IRMRAK_blz.pcb -- Sun Mar 26 13:26:05 2006 |
| *PART* |
| M6 PAD |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *SET_ATTRIBUTE* PART M6 |
| "Value" HOLE_M3 |
| *NET* |
| *SIGNAL* GND 25 |
| M4.1 M6.1 |
| *END* |
| /schemata/mereni/IRmrak/IRMRAK_blz.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/IRMRAK_blz1.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/IRmarak.zip |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/IRmrak.opj |
|---|
| 0,0 → 1,113 |
| (ExpressProject "IRmrak" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\irmrak.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "IRMRAK.asc") |
| (OTHER_Netlist_File2 "IRMRAK.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "PADSPCB.DLL") |
| (OTHER_PCB_Footprint "{Device},{Value}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "H:\IRMRAK\IRMRAK.DRC")) |
| (Folder "Outputs" |
| (File ".\irmrak.drc" |
| (Type "Report")) |
| (File ".\irmrak.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (LM78LxxZ_TO92 |
| (FullPartName "LM78LxxZ_TO92.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\POWER.OLB") |
| (DeviceIndex "0")) |
| (ARK210/3 |
| (FullPartName "ARK210/3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (ARK210/2 |
| (FullPartName "ARK210/2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (HOLE_M3 |
| (FullPartName "HOLE_M3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\PAD.OLB") |
| (DeviceIndex "0")) |
| (L298/MUTIV |
| (FullPartName "L298/MUTIV.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\MISC2.OLB") |
| (DeviceIndex "0")) |
| (L298/MULTIH |
| (FullPartName "L298/MULTIH.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\MISC2.OLB") |
| (DeviceIndex "0")) |
| (BS170SMD |
| (FullPartName "BS170SMD.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_T.OLB") |
| (DeviceIndex "0")) |
| (101 |
| (FullPartName "101.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\OPAMP.OLB") |
| (DeviceIndex "0")) |
| (R-TRIM-PT10H |
| (FullPartName "R-TRIM-PT10H.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "C:\dokumenty\@Dokumenty\Schemata\IRmrak\irmrak.dsn") |
| (Path "Design Resources" |
| "C:\dokumenty\@Dokumenty\Schemata\IRmrak\irmrak.dsn" "SCHEMATIC1") |
| (Path "Outputs") |
| (Select "Design Resources" |
| "C:\dokumenty\@Dokumenty\Schemata\IRmrak\irmrak.dsn" "SCHEMATIC1" |
| "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -30 0 200 0 403")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 44 914 58 495") |
| (Scroll "0 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "C:\DOKUMENTY\@DOKUMENTY\SCHEMATA\IRMRAK\IRMRAK.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1"))) |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library")) |
| /schemata/mereni/IRmrak/O1.pdf |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/IRmrak/O2.pdf |
|---|
| 0,0 → 1,82 |
| %PDF-1.3 |
| %Çì¢ |
| 5 0 obj |
| <</Length 6 0 R/Filter /FlateDecode>> |
| stream |
| xuK®&;çggà÷cH̸,ñ»}ÊYv:"N_µZjÇ×ÎÊËå²ëÿïwøSLßaý9ÿøÇçëÏ¿õïþï«~ÿþ¿ÿúüý÷ó÷__öß¾ûËW¥~çÚZÿþ<ÍX¼ù¯¿³pxiù>Û ñÆýgû NýAølsÀS.é»^¾y Ås%_ÂÃSOÌQX¼u¶ó× ¿~ÇÿÝSø+ìþÄQpñ4 ! ûÖ c2ßÂâ½áðmìçögÂ_Áû#ÁyÆë?ñÏßÛìEø+,¾â/ ú°xHÂAø|Å9;Ù'Á9Ô×®ÿd ý˵ |
| Ó 8 Îç ÿ1<ã;¶}ý ×pØÍ`¼¯æ~ ÃAÅ| Ç~ºñðÙî ·î^?¤Ìþ¡p8õáÜ¿ÀSñIH:õµf·`|ù72ð+,>¢p7±ÂáÛ ð¯5ô¯Î| §?qÜ~óú§Y2Ìi>S7Î$ ó |
| mxãþ³ýY~pê? Ùo|ý kñ½£ g~¡Áù½vÿÜÈ~(ÂC¡þÈApoüc'þx槷Yðr/£&á 8ûÐ>æ ÓxM?ù¼×/6ÿÎ3¾V³4 a=FaÂæÇ ØïìçYðÒ¨?p÷{ýÖ×üUÏýÙcö¦qÕ À¯px |
| ·pì§(ö·ðÙî o+¾{ý:ûÂáØ Ï6<¬ ¡y~ÞfÂÓ1æ( ^gg^}|9ä(8ïIx?ã7é 9 |
| 7¨? |
| ÷}>¶¿èÏßÕ #1ßÂy¾'áðmìçöáùE÷o í+Ï0>ê³à©y}7÷ø)?x ù>Û ñNý»-À> |
| c>Û Û_~V ÿù®/H0ÿ²pÏ,|ÒýE ÃKëÌ·`óÇdÂá;Ë%>àO.ùáy,ìçÃÛ¼õ%á¬_à¼váµ}ä 8 QøðçSÄIp p/ÂûU]ù=ëÿÝQøÎ×ûÝøA0¾Ö Ö Êñ2Ä>ÆÕ¿ÂþæálÞ(>{? õ |
| Gål¿±ßù×ø×Å׫Ä×+å§k~z¡üvÍ/ð*öAðú¢ý{¸þ·úÞ÷ï&ùÁøúà Þï&®/Òz?½¿ñºøÛúí_áò <}ßPpÿú×®+ Xߣ°æ§£`¼)o̧r¶¿^GÐ?gã ./Ê Ùú àþuõÏëûëôÖÇsTÊÿÐüNõ Sê;8>á°ô{jýçÿàõ1 |
| æf×x#¾kÄAðüNßÄøxÿ)R|»g°ÿ4Ù?Âöïi²GØñ=ÍAñ açGxF¾ÒIöQØõ!ÿPøx9³Ö73õã§ï?Øt?¬ÏA0¾Òës'Ù?ÁylÂc#û±ýXÉ¿¨þÅëmj|Ñ×ÇëqB ãEya®ö«Øâ ¶%>k~ç§i~ç×Ìa}@pÿúwë[ïpØù[÷gÿ¬ùÏê«Ô7s|ÄýÉ~)b¿²_ºØ/ì#_/%zÿ´ïX ¯Ç}ÄýÝ+_ÛA÷¯à îOÜ~¨b?Tò/¨áú·ÂÁûÅsñ¦¼1Wûí(þpî_ãÂù)ßÂù5sQæ ¨¹Õ¿[ß|ÃÎßZÞûÃÒ4ÿ÷þ°r¦*õM ß õ/Yø ÿù @ýîù5K^Üÿ¼ÒQ°~W0®×Ïrý5 ðþÁøP>[ºæ¿ðø@ÿ |
| ûgùÃó.ïÊ;ÙÏEìg? |
| Í_W0 çÐëÚ?ó÷Ó·9ûûU·í4x? ÁøÚ¿Ïìý`á¼}>ûu ükì?y?øÚr7àûËs2ìG8ßAáøéýè |
| +'/çMy#þ · Á¸Ú¯lm7 ï Æ5?óS5¿óûjEý»õw8ìü¬óÝ2)ÿUó_#Õ·f©oåø~ðÎýòvëoÛ±èß¼¾Ø ãÏ Q¸|( d¿ëøéw|Y8èß||u¬ÿ'éׯký:/ôÏ?ì pyU^É>æ¿rþ«¥ý»ñÂ|ÚþïO¼Í©üì¯=ÍLû£$´ÿFÂâïv*p7±qõ¯°¶ ý>ç|úî¿pyTÎöa÷¯7ñ¯7ö§PðütÍïo½éì_àYìàõEÿ*û÷6!¾Æù³æ ÂÏþìi&åÉyú`¼Ëø añ ÷À<}gñËò@ ¾ß@áò¦Üó»Ce W°ø³Ôë_çl}àë¸ ×÷ýãkº(ð}Æ×tQÀ>åìßç î_Vÿ²ûgáÜï#H0^æSù$Õ~fû9 ¯ Æ5?ó5¿ókæ°> ¸Eý»õÍw8@}j§úµ&¼q~ïó˳òì¼Òóãzý$×ô|$Áâ ÂAðü }<¿ø}^¤>-¯Sxd¿v±óí8ý»qù¾o¼çWg~ïtØ_Á¸M§Øÿ |
| +Æ Ï(\ ²ÏWÜ¿¡þëßäù ÅmºFñ®¼3Wûí(þ`<K| ×ü ÎÏÐüίÃúàþMõïÖ·ßápëS}ÍÒQaÿç±ÿaÿqÆKXû× _¶ãDÈ |
| +Æå|,óùX^SO¨ |
| +'åíGµ É¿®þù÷¹o8°¾AÁxQ^åxTûí¿Çx&ÿbåøP0.ùAáò¦¼±ý®ö;ù7Ô¿1)>ÿ ÏÏÊ{ÜöAØù{òw˳òÌ<)OÌò þ=þòï7 þþÏO OÈßáöQØãüCa>?áò¬<³ýªö+øÇç§ |¸¿®ïP>Ç$õa?®?{ürý#Å·Qyût>o¨O[VÑßïß&~ &|½nGØ @ÁøÚý¹ |
| +ü |
| +ãMyc>Ôþ`ûSýäßÐøÇ74?¯0)?üÏɯ¿æþ]Áó{÷·Hpûðû£÷÷þ}ÓûýÿücnÏoø> |
| +ãößáù ñFñ`|-`ü¢pyP È~bßï× X¢àñ/P~GâË Ê Xûý¿I¹Ç×5?óó6«òûû!õañµ@ ãYì`¼ ×øÇ÷6ò@ö±~ ·r WøßPþ¯p®¼Úþ´?ßß&¬¿Q0nÇøOr¾q9_DÁxQ^7µßؾúÄ¿)ñà Ö?Õö7ýý Úq0¬ÏPX|}¿CýApñÍõüôýÏÝ,Qx¹çö9 ¿`<Ñþ= Æå÷(oÊó¡öÙoê_cÿ|ßó |
| +öOãë5ò@öËûÅó߯`ù Rüú·ïß¿ÖëÃwg ûóH9M{£°yoIø¼æðáË-þ·¯ÿf*<endstream |
| +endobj |
| +6 0 obj |
| +3235 |
| +endobj |
| +4 0 obj |
| +<</Type/Page/MediaBox [0 0 595.22 842] |
| +/Rotate 0/Parent 3 0 R |
| +/Resources<</ProcSet[/PDF] |
| +/ExtGState 8 0 R |
| +>> |
| +/Contents 5 0 R |
| +>> |
| +endobj |
| +3 0 obj |
| +<< /Type /Pages /Kids [ |
| +4 0 R |
| +] /Count 1 |
| +/Rotate 0>> |
| +endobj |
| +1 0 obj |
| +<</Type /Catalog /Pages 3 0 R |
| +>> |
| +endobj |
| +7 0 obj |
| +<</Type/ExtGState |
| +/OPM 1>>endobj |
| +8 0 obj |
| +<</R7 |
| +7 0 R>> |
| +endobj |
| +2 0 obj |
| +<</Producer(GPL Ghostscript 8.15) |
| +/CreationDate(D:20060325220718) |
| +/ModDate(D:20060325220718) |
| +/Title(CAM output) |
| +/Creator(PScript5.dll Version 5.2) |
| +/Author(Jakub)>>endobj |
| +xref |
| +0 9 |
| +0000000000 65535 f |
| +0000003551 00000 n |
| +0000003669 00000 n |
| +0000003483 00000 n |
| +0000003340 00000 n |
| +0000000015 00000 n |
| +0000003320 00000 n |
| +0000003599 00000 n |
| +0000003640 00000 n |
| +trailer |
| +<< /Size 9 /Root 1 0 R /Info 2 0 R |
| +/ID [(\\H:áË^ì|Ú=ï¶{I)(\\H:áË^ì|Ú=ï¶{I)] |
| +>> |
| +startxref |
| +3847 |
| +%%EOF |
| /schemata/mereni/IRmrak/V2.pdf |
|---|
| 0,0 → 1,185 |
| %PDF-1.3 |
| %Çì¢ |
| 5 0 obj |
| <</Length 6 0 R/Filter /FlateDecode>> |
| stream |
| xÕ}É®e¹Ý<¾"Æ Õ7_`À3»>!`׳gà2p |
| ïï½ERä"ï¼éa"XZGÕl5Eýé_rùÎû_¯ ÿù¿ÏÿöPðÏÿ· ùçÿúQó?kké_ÆúYò¿ì=òϲùßÿ ?þçó«ÿxþþ×çïÿ¨ÿý¿hC¢Í¥þ¬ôãýQK-\ùÜól1Æ,u¥µäybV¤YêÜòGäú³¯3ïb¦ü1fÙèiý¾ðÏ/ü³Ժ,æ§r>¿Êó^ |
| +DÒÇÄ)mùÅü9 rc̶¾ÙÖ4+Ébús̼».¦¿ÄLû»ô¯1¹åü óY¶ôO¤}~å>féßÅ,ýsÌ4Ï ïßÇLÏÏù¾»óùÅç«~sÕßÅüö[©¿ùVê·ßJýüÌù]s~ÎbþióC£oò|"}ÌbþióÓ°¾Ë³¯ÏyRÌ?Íb~ʳ|gùMåÛ<Ëç<ÇþnìûóØÇ1ÿlìã_ǾQ¿Í³þ&Ïúmõs}~;ÆÏßñóÛ1~~̳>[ç'gÇ× ~öìüÎ |
| +b ¸Z±)ErS.ØNF^;ÿý¤¶ÊÓ½2½-à-EX $Å+ö¬&v R b+ÇbU[SÔÊþ[Iý FTl" "*6Ë 6ÍD`µòÆ)ªØÛå*ídaäo%5÷ìqߢñaçG_<«±a;gй~YúÐ϶@cRwK9Q¦ò ¼[Ê 2ý|µ#;[<Îå¤ó+wñ8Ó´ùcÌ4,f GUyyý§ ×sÙñÆü(íjÙb´OmýÇC ÝYgõåëÂLðl9!òÝó=òÅó%ðc;!òÃó#òÕó5òÉó)ð}:aäkÈ9|úÆt|õ|üðüüöü<U¨ñ ß=ß#¿<¿O ÂxÀ×rÔüu¢JàÊçíxÈÏÈWÏ×È'ϧÀ§éxÈ7Ï·ÈgÏçO| ùÂfK øùéùx*ñ ¯¯ ßߧ5¡ñ lißùà3Ѽ{:[«âOÀÑæÓÁçåJX8ÅóÃëüĪ<ÚsΩ§_»Õ0 )>é9£ýJÎËÍP(Ä.ÃM |
| +/Üòåúw¶ùãTã!àÖ¯K nû8ù à¥ÍYcûVÏCúǸÓv \!ý>]|7þZñ-òn|Íc ô¯>L;s(ÿÌ®þf õ75ÿ3¿9 ^÷LÓ m´ÿ0~hù.ýkøþÕcÿêÛÉ×GÏÚ'Ñö |
| +MºyÐÍm\Çó+ßà ^ òðòÙ±Çس¾2ÒÅ k@¸|1^ã!àå³5dÆ=bYÙïÑ1àòtÌðäÇÏã7ºy`¬²Bæ!@yhc xÝäVL?ð> ¤'ÕaoºK:n P ò!àusýý+é×ÿÏÏoºÆçî{áçSàm ÷ñWo+¦AàµþåojÈ"üïg9 æéÐ:Fóçü÷ {¬âÎ@ ñí ?7Ða3¯:8æAG'|õüïs9 ÷hüýï/{¾hûËç |
| +ä(¡JõS]jiÙ Ï<`'[ç:úºäÎ4("^ )_È·=1Õ¬¿8 Jsi<N Mý7æY6 1Ïõ$Så¢ðU|Aç§z ÁóoÇqyÞ~þ´ü²Tuùa |
| +Ð¥@%ó XªTgзrr+¶fM/ ä93X|3xùlM!{\0ò°,¦h^Gi'«öÃs¯¡föÂ0ï³nX ÀÁ&ý×Íϱ{«Ð`6Ä]!ÛÝÜÛÂpkb3fa×Îg n5 sÙÄvÁ¯½o@à'$æýni_²¥^®³DX |
| +<4¥ÛmBS6OÀmÊO5e3ëïJSn@üÄ ÞÉ ëÙ.:`Ç;sçï-ÿE¼âãv<:Q§ÂoyrÝ w.r Úp/ 2 U¬ê\ xTyì0AH2nîp-Æîùxô&Ãø¤øªºæ èÀSn [ª?âùbÉßÊ%à¸Â.°±/Ó¥¦§ÓA;ðoQªºÏ í©ºDʼBððÓTË1æ1×À¤<äïdj»ö ¹çRó¨á^ X¶ |
| +#è |
| +Ng3Î |
| +¼cZb üW-ìÉÕÿùdòii`1«_²ú0Î,*ì1±× pËõ#u o[m¢-!OLé>½ò¯2&U £vI K |
| +<½ÿЬæ|=I·ì[º§üx ¸»CLèý 0ÕÌ,2dq6¯Yä+gà|³0U2׬2½<tàÜêÖPUðë¼!Çérla*NÍMÅ©ÃT,ª^éÙ#LŦæ/c©yÜ©X9!x6$¤¼³ÀÛpÁûrÃsgSÅ»@ ×± êp#¼xó ¡x¿~8è¶+X¶3þéçÒ¦ò E/pÐB`;îÓ¡1Õ½ÊYfÒØÖT§øxVCg f/3ÊE @ÝÚAB_$MõÕB<ÎP¿L xû:»¸²Ò¹Æ¿~8èÀ¢FÞ x n!7mB o ¹)`) |
| +zeG2ÎFB೯jßø [£qÊ|»UOæÚÔØ ø¬ûëh¸èc(>üñì-ç<i9? |
| + µA7ÆM]n$YiÓÂÀÓªe¢iªüÀE½ZDÐÚënÊÂùc$Ø.G׺ná³_5Õs@ËrY ?v1ïδҲ0CÀ½QÁ&')z¥»Àtà-]̸àäZ 9 |
| +#tzK+tjhª´©).Gʪ¾±a¤ÌW«Ô»úAÍhð _Þ´êÃÌ*¨ø5ßÓé£ ¹¯f²ñïsF£rðVZ"ÕÜ_çIF©_ :ð¾i+WM·( ÎÔÏR¥RáUXºjÑT**¤zª¥l¤3PMµõN¤¦õÇL¿nûTma S¥²·p§³Çç2Ï,©¼ÍÑ2CéF¤q¯ c.ÙTúRuÄÍóRG ÞÊeàÊ÷cxcOÚ2 þØ?þá X ¼?¦]OM{>ÔBvµwÐ<µ`z3kP eZ(ÃոǼ?vÀÕBP Þ S%P¾Z°« s¬ ìk!c-d_ éö@X¢¶:³j¨(1éÍÔû-=º¡ï6_âUv |
| + CÐö}¼MáýqFP´ Þ6î_ fAiâJèBÙFxÉbLàÀðÎú(xî |
| +~ýpи(¸¨î¤ËÓ| ÎjêîZPìh%Tù lÑÊS¹ ?<ëÕ4÷Ð6Ùý¼Å8µè2+(6ý¸¸ M^gó9#¬¼:ÂFè¤:4æKðpOWîËó¾Ø ìÃÈ^?¢Ècò2T{õ O*ú6䦰9ý¼GÓ,åXÓ/à&t9:üð_åVfq`½j»¬7Þ?§Ä¦ôwºI!àX (GNÊ%»hx-()Ö5&ÈÈ |
| +b"7b¸·AÓîg»Hô Ø¡+Cíìi¦toÉbèÇgµ ÓÔüd< =ùa[:Ùdz*§d§mñ]w?Ë× ?ݧ)eðºcùßw+ |
| +héȦ[Êv´NêéÑ©V4 iL|PÅTíd¥ÿ¾3ÿ6SV®mæ¬Ä;D.] ¼ªÓ ,³æK[jÂÕéÕW¸ÐéBU |
| ++fQ5à%>zôªLßsÐRLÊQ¸H |
| +PW zOíq¸{jgO¯ßXA |
| +w^ÈEÑýzèëW*ÐLÅ$ÂUû |
| +ä )0®G¼a¦b\¡òæf?æ>_ภ|
| +áïùc ?À÷b:¾{ôîð·<Açûb/æ©ÊÏëº&v®+ÏÎz½ ûÞ&×Úw1É7WðÆÖÆW:ð¾q³Wè¾íZ ÑtIö6?Ó Íþ¨~ÝÕ¬£åÔ_ |
| +¹ñÇGéén\U:n\WÇCð¿rÊO;>¦Ä.¤lî/ tà͹&81¦? N tà,&v¶Óíg.c xCËån¯ @yt+·N=éì'ð®Z¦mþçêª2i5^ |
| +!ç|vüQé) ù7è &rPARQªêÆá|0ó¬ß4&ùóTB¤-³ %8_dm¤zé[åCðNêÁ%ôæËB.k0UÊDV *1Édl»æìõ~CbÙä ¦[gJ¹ |
| +¦EZ }k ¡¼¦! ¡¶6= îMwʨÉ"ÿ7±"lï F(úv¢ÿ«xîOYáî9µI6<~Ç×xa¶öFÝÕî×>ó¦¢à&t9ü² ¦Ô©¡)%`{^꣺¦(õØ )wwMЮÔMù¬â|SVz.D×PE¸à½ àåiŦh áÞ¿pHbE¿çJ¯eS²Þòtଠ|
| +5Ç$gwmÌ6SÍZyx[ î¡¡À%ëYëeóCKbëYv/~ tà}¸ %´èvá@® h |
| +${4®zd- |
| +: mt |
| +¸t GwXÍ7@+Sysár0~^¾Ü`|Á곦óÑÀ[¹ ja«õ¥Õ6D+@MX µ¦/ÕBµï x×佺Z· [Ñyѵ ,/û}½õG=*ôBx7èÀø©ptouÈÇOwåõÒ2èéù?>ñt[Ö<ùÈó &UǼAzÕÎgR9èÀr rü½Døþ \¾¡NëHÖRýË<Áù¦üÖ{à ¿ºT+gîiòiPmïÕJ·+MqãçUPrØ¿çOÕrzw½ÒE¤Vv¿p{eÞ8¡¾)´ v zJá×´n¶ãáΦ.*Äq-êÏ ù8}ïÌ(ÊÑ¥þ%e-Y}cq®g |
| +`%È¢û,*ÈÓHÚ¯L_¹ìP%ey pª¤`u±7\n ÍûK5îÖ2´¨¤q_ÈY ú''Ô±/°ÛkÂ&J#<M,XZÍ<êym Qó/Ø |
| +`_ =£5Tv»@¶5ÜiôûIâ~²@_HÔøEyú I{òUzvEoûÝÇ# }<V|ÁÏÄs ïã¬E 8©r·¹õ¡rBû½G§¹&l¢Drû¤+{Wð' {Þ G4+pÔjrßø4«¿e r8@mq:ðÖ¸r@"È!)§v¾ `ÅüZ£Kµz©8(¹RïQ(Uw¹L"ØÒ[]wÜv²© |
| +em(k²v/kGY»µ£¬=ÊÚ½¬ e (ëð²¢ËC£&kÚyÚEÊ~¨ÔÒBà]b³ú, |
| +rXpò|© Xï |
| +ôÈZ% {{Z:WÜ¿³C+Ô%· {Ý^%1úqG0®¼ÐÚ°¢f_cÐMLox>!khÀEÛ ½ ´i2ùxÑkbU»vQÀ§ ô=-F/ÕáÓx´ Þ ç¤v@FsÓ4ößàÂìVê9 ¬p»rЯÐü¾¿"xß·ÛOQ²îÃý)¥j>ÃÊ8gÇ¢"x@ûé ñêÏ WæûY"oÐ÷á2p¤ úÙ!Ô©ÿ@Õ¢v4´¿¡ÈÓHèX¹¦èIIImO5g xsªÍ§Jµ(·AxÖ{ÇßGÅ»ç@ÞInñeºüÄ ÐÝ\C@º kõV·O5)ï ¥3iÿÉ Q«ë Ù7Üx¨×ôîí¡é1M-º(UFÇîS/}t@.VêYåéó 'É ¸ÝN·"¾§P»A»<@Î}V;¯íú% ÔB¥{jM7¾oý!x³ãÆ» S¥æ· +ür5· |
| +#ðôUÁë |
| +ehbR±WõaÐ7¤ªþhÞÈiÿþGã rk F÷ë¹Á5`X¯C¶êuÙG[øv¿qV´]®>ô Öì¹]'ò»(ðëç±+ø%n ë, |
| +ºE]/ËÈ`£gZéZ}Ò\rEà#&nyÁ7 |
| +б>¤~Ý|)®åÞÖ¹IvEú ×Ý3ÒùKàÃÀ[¹ R¥l´ýHpC| pµ Ы Ñ|-¬X Ë×¾[KricjÆ©¯xvr¾ôÈCbÎWp&|åÎ*Ô@÷ô¬åS=ܸW8 ¼å©_ãLüjBÃnmÐeêëDf(ø¾à5¼z+¼úW,xÁ\K,xñ©,xñ/Xð ^|Á3<£9<»Ó §i y(8R@7àÎz; 71/í²¯ áÅm X³åÀ²ÏÛ÷t9 oIæÊPnw c î× 9ðþ*p¯pe#µàß àår «éa׸¾ãiã ÐE ?*²h£2] tË˺È#jé_çëèãæjà´ íûëÐz oÈQëöâÛwÒ¦UÁwz XãW¤ëÐEað13ͼº<gý®Bå\Õxh |
| +$Õ¤?¥s "ÐÍ_N^HVOôBr Aýé^";ke½<tà\MR}ý̽!Çîs4= §¬+ægdß% AY(fÕ§RîöVCw{Á@¿_pï¡¥½¾NO¹Á"ØBà¶FÒ=Ù@ÀÍK¡«5¯*¼È©ýÒMÙ*0Ê<wücà |
| +®ã& +¸-#®Xðå .#:õÀ;Öµü¤B§y6i6ý¤2Úð<&àtÊÖË êö³é¨>Õ³q¸3&·¼nÜò³)%d³éÅ ¿¥® ÄWð¾BÁû#8°¸y äJ>b°à}úT' ÁIu.äBÁ)!+xÅÀP |
| +Þ/x/^Ä/¾àyu:° ÕeLÏOHLoFÕ>°NÏ©Ã2B,×fn?G z® 9ðþjµ 1G@¬ âkë¦u×ùÁÇ{mà- |
| +õøÆP<ßÒ9á¸ç3ùN.Ðmj8²DÞ ç<)]tF÷ÍgàXn§eè{ ßò FF©s¡ëü«|Z |
| +:p ä¡Ã«Ëe ÀÞ¦¹ë¦:¬x(_®õ¼+È%ôX ¾¹~U}(òÂi¹rárå_Pd_ ½AÎ0ÛäLÏCåhçÈs |
| +W©x4çêðëðsRÝÓ`qá 0©D ïȲ¾}s%XA7ÕLnɲ¹Ç¬d{¦Æ '{x6åFð¾ÜõpGv|ã=È fçd¯àdn®=6|Ä*PA¼s E¯Ntò6=p#¨=âF§Û²°xèd |
| +`Nö¨xèD* yn8¡xëÙóß®"×ÏiõÛPUÁ1Ü'WuýÞXÀ¼.È^"4Ë.Hq¨ç^ Çbð |
| +¢)þÖd&©v\ +XßrÀô¼{x_î>DpE,RÉÚ¡¨µ*@äQ'ºfû*²û±ÄOK¯ tб_¶¿.ħ Yw¼A_Õ"¾MÞ¤Ú¬qñ[pвoÎÀU»{ 2õz]du0äEmð± ú óG>y>^½ø2¯NE1óæç¥k§Q|üñiO¯ÕodtÕi¨÷oámͲ E5iÀýP(<Ø¢;+üÃöxªsàìÌ+Áå¯üt!{à^ÄëÚ.{U#¯ñé|tÅøjINWРRÕ`\]ð4UI¤®ÐMùNÐþt®Ô\ÞÉˤÏnÓ{òÌ ²ÕH¸þ¤¯ç äuiâÎìd_ëwÎY²kÚ>`¸¼Åß |
| +Ò ú1ã0~úý?öý0ßÏpë¶ÃþjÒ¥ûÎ+:T nÔÙÖÏVg /1êñ»ñÃ÷*¿}r |
| +Ú ýþ/1ýáÓþ³ÜøIÃ9dÂiã7rÁþa4Dý áÙü0èÁ/ È:ÑæÑÃþ}¬óÓèÓÏOÃïÇûßO÷ öc6_åõ.øþÙP÷ö/±ËlW} Z_Jù¶?ºïþ·\ýíX¾Ù n ?ã÷!F-ðÛx³ ÞéçÄÜägógÇwаá¶~_bºoÖÔl.óÛÂñE¬+¡|t7ÉÛvøþÄ&¾úôkà§ÏÆüuü>Ì6~3ßðÙó9ðÝÉã·ð>~ñKóõÛ}ùr,_öõcý$_¾åóÖòÌcý=ßaýA맾³ç¡|ôh' 0~úÇñÍÚ¶Cè²xkß6ýúg·?çûÐ?èÓÖrYÞàõ«ÝF~|¤óà2åûçE |
| +bÿ´ú_n~¯çÑÞãlø w¶´|ð¦Äïî9)~nÊ3=teóñ6ÿgÞÉñ§çíPüøL~ |
| +éã»+òñü$ϧ ¿Þ ×±àÖ"½¢iãÿY,|8êÏ\¡íì×?òÚ¥ÖÿY þXâ[úݯVöãÛã§oó =áOdRú½"úºÈlú÷¹·×¿Kü<êWxüÔóºÐç _×w ÔíÀëüE׺ñ|BâoÇ8¾®áøó×õ ó°¾øÉÇﻸõ#}°~ägç¬}äÆxäuü^¬.n×ø¤Îô3}¨ü|qÛô;9;O*k§uGoÖ Àëü¸fuúÕËküsÜ úѵ|ý¬P? _ç?º úËËOå·ÓO |
| +¯úǵM ¼ÞwÕ£SâTÜþSâë÷!7ÖcúÚÿwÖOöÊ.}®è±¹ñ{ÓÛö8~g·ÿ! ÷?dõeú©Í¶ùêæyð Æÿêæg~Ð ×oÕÍÏÂÀw ¿Çø:? o·ÂùYøäùx¨ßéçgá}üãæxãki< ïÀÇábÿÿrûSq,nù³£å¿®¿öù9¬¿Äm´=XGãË×Þì5¸bö¹ ,T~:nÈ°¾& Ö?é8ú'?{«ß7ugÜ?³Ãg?6{þÃï;ãþz·îö×OúNÿ$¾ |
| +æ2¾î¿ÅëA¬?Ýo0çü¿úý÷M¿úôÃþÈößÌÏ¿y¼èvçx º?_½|ö||wò åï>~ø£âþ[êÚo¸ý7óø:Ú¬¸ÿ ê®%&_¾å[¶á6 êo^¹ø û ÝsÞÙó0þqÿ5¾zý6óÐþ+è?×ø£ý&;ÅÕþEa}#¼öorµ SغÖÿ¿+Î?äX×æ?òy ëûD |
| +[õéµ·AáOú6?·]Ý ¿¯ ÷ â|Õþ<@³8ønÇÏÊø§|wý!âÂú^zYúlp:ç¯ ú7ÙU{$ÜõÂúæ<÷DHÊW º?º.¢ï+ Î5Ø^0'qx>ÈÓÍÄõÛ¢ÿ9¿Z8þÁ#/}ÏòKúZþ2~DøðH<ÝÔõÿ}á úy~¹ýKxì_mÂþåò8þØ? ßÂø§û³Ë(ÿôòãþ·þ²ý?;Z-~ |
| + ò§+%)!ú æu}ÈÏ øýýý¿,°Üüú¡ûÊi |®Çñ1¼>ùåÕëË·ÀÏåx7ÿàúéò1}¥y7ÿàúôò%ðÝÇï1~ÏÏoÃñmD>y>¾vÇ× y ¿ÆøÅ×oõ}ûdØ_}xz#½ÀútfÐ_¢9ý¿á´¬ôìôüRê¸;-?ùý?þ6§Ü {É[%ý |
| +úæοÃ_#~_ìßÔøîôËü¤§ê'89ÐOg*³·ü+îÉ~c«ü³:ý¼hkã/]Áñ÷ÏL{- ~ ±¥g²B¯ýü/ÀúãÛøKúcÜ_÷úói;ýǯõGÏ£W¨ßíëúgùöÏmæ¾ÍÏÛ ÆoÈãüÀõoóCÐ?ñ3°0?0_Cûüþü·ùy¨?ê06?ó (T ë¢ý´ðøªí4 ãqþÆóaáÁ¾'A=øÌ<ôm=ÊÃü^ô\ õ7%ã}ÈàW÷?Â/\ßUØ¿\>¬ÏÆôñg?çÃúp ×>¸>{>¾»öÁýð>~Çï:ô? ýRnQ~]¿åäïoHü»~®t©8ÃúYâßöÍÙ1þV¾*øº~É`îñÊGÇQ¦ÿøöN |
| +.¹ý(=¾[ýùÑâ8þëüJ÷/¾Ì¯ª¿|(E^Çye¸F^ãÓú9ûøv~JüóS?8~ßíFy8Å·ãùÙ4ù¼ýèwtþ&~Åù[ÏgîóÆ=¦¯í_-f ^ÛNÎþåò>þñM>â¿È§ë áCÿSûGá[_×ÂÇùU×o }©µØ¾*ß |
| +ççR¿þ |
| +ú+I_Û\×óQ;¿§;ÑîüÓ·òýÅå³ýÝÁýñ¶¾-»ûõÄ·ü§ß|Z~67å·úÝÛëÏ8ðºäo×ëSõûKÎÿÚGÔs¿ÄÙGpþº~£û!¨ü»òÞ>êæ¯N¹-î¿%ÿ üûÐ?Ñu¤¿OÛ¿°¥8~~îäØ>j¿Â<دÜüo^¿A|Ñï®{ø}ý> õ[ôûd>~¶cOZeÄøù¿_ÓÿÕ3¿¡þOÊ¿Oqü.Íò_ |
| +Ûíç.õösÂWl ´»<Äwös¨_g?wyh g?'|ÆþösÇï§Âù¢ð°>NÎ~y¼ E |
| +ôüõòÐ>`0§üú%>«z Úgãý áç|ñ| ¼ À~îòÙó9ð~|û¹Ëûø=Æ÷ãÓÀñÉù'¼| |
| +Îß.ñ / |
| +ãÓÀó·Ëã÷à|Jx úóËCûð>~ÏúäǧÔFäçSßOÉOôÃO¡~ýøJl ?>%7>áýËþüøp|rþÙ.ñ5âÑþú·Ù_ ¿ ô&<OÎÚåaèü§ ?aèü§] Ö·$ÿ´ccþáGýû9[°þ ÎÿCÉô½/Ôýú_á4ÿ6ò¶`ùp~¿o-büúe|FRÖß8ÿßøÀ§ ëç¯o ²|ª?>ÏüÛþÅiýoþCý Hëù 󰿧ýù ÷7¶`V ö÷t!Îüoí_&Þ_ üe©ÊCû ïãwöÂÃù =HQ}û¡} =böÌ»7zÑ>óò%ÈW|ü2#ïëìϾ}à|^x_¿p>Ïò%ß>øþÓÑ_Úù¼ðø}<çþ çóü},×>x¾.¼ïÿ ûÃó]æq~¾/;ß ûÆó]æqÎ|ö||xKµÅø-y>¾ºúÅó]æ¯ Ü3ïëßGKhß.|Æø¸þ½<?î|y _÷õã øñÏ Éÿ? |
| +_|ûe?¾àù#?ûñÏ ÷ã ? |
| +< ÚÇÎ 1¾ _ðüQøæùx?¾àù#×/²ÿ |
| +8_<÷óÁ¿h |
| +÷ãøAeý;ÜO+ÙK¨ß ø7Má~Ö~ó¿¯îüOôcê_üC8ýÚrö9ä Ï?9kßp ,ÓóÅÂýÿB õÌÛøêDãÍ?$»Ûª3òÅóAhþ+Ç÷ë |
| +Úÿ]>>ûø9Æ·ñ{{ý¬ð6~o¯ò«=âñý(áç[¬? ?ßÊçï¿ñüoþ5Ç÷}¤ýüþ~ÜÓþ ÎK |
| +Ißí:Øgr þ¯³÷ÏHÕUÃþögäÄíϦÛß;0ÜßC K¦k·k.}Z®`úôথOî~\úÛÙ×;l?zpÑö'eúûkå\øÿëç~ºÓ ÙÐ>ü9AûÐ#Û¶¿)3ìoÎ RX ÞÏèA?kß²BûRù |
| +¼Ïýþè\xõYáå îïî$>د%Ô1ý.<Û÷%<Ê?q}Æù£ý_rþõ Çô'ü¹~üüÓ II©?J¤ÕDöùM=/«»ÈPh#BC!ãYW}Føüêímèùìzã,0ZðówÊÓm|ãùúü3G2/ÞRsü3½Wäñ6ú©àsàó>Ör<9ãnÃVRà9þ4m#yS+!}yÓWÓ¼ÉÏ|ßxN xjhÙÙ@,Ô¸ %óöEHCÃ;Á/y¶¸ Ö6ò´ |
| +ãhýbÿ m ì`üüré÷¾} Ô\8þA¶ òÕÍ £Î> ¾%??` ñ9Ô _#_]úØþ òaÿ×-öÏêÇ·ûwõý»Äï£øï£Äï¯øï§3( ¿"¿\úX¿Å/X lâÛ¿Æö¯¾ýkX?ìÇ¿ ët~ iþÄ×Ðÿ!à¬?÷ö< ÒÇ â»#|Gùü_ø ÓÏ.}ÎQ> ¾E¾y>¦¿Bú)È¿\ý2DùÇÂöë#´?ß}ûbÅï1¾æÙoåãïnü`hüûñÿ ßvÃCendstream |
| +endobj |
| +6 0 obj |
| +21384 |
| +endobj |
| +4 0 obj |
| +<</Type/Page/MediaBox [0 0 595.22 842] |
| +/Rotate 0/Parent 3 0 R |
| +/Resources<</ProcSet[/PDF] |
| +/ExtGState 8 0 R |
| +>> |
| +/Contents 5 0 R |
| +>> |
| +endobj |
| +3 0 obj |
| +<< /Type /Pages /Kids [ |
| +4 0 R |
| +] /Count 1 |
| +/Rotate 0>> |
| +endobj |
| +1 0 obj |
| +<</Type /Catalog /Pages 3 0 R |
| +>> |
| +endobj |
| +7 0 obj |
| +<</Type/ExtGState |
| +/OPM 1>>endobj |
| +8 0 obj |
| +<</R7 |
| +7 0 R>> |
| +endobj |
| +2 0 obj |
| +<</Producer(GPL Ghostscript 8.15) |
| +/CreationDate(D:20060326222001) |
| +/ModDate(D:20060326222001) |
| +/Title(CAM output) |
| +/Creator(PScript5.dll Version 5.2) |
| +/Author(Jakub)>>endobj |
| +xref |
| +0 9 |
| +0000000000 65535 f |
| +0000021701 00000 n |
| +0000021819 00000 n |
| +0000021633 00000 n |
| +0000021490 00000 n |
| +0000000015 00000 n |
| +0000021469 00000 n |
| +0000021749 00000 n |
| +0000021790 00000 n |
| +trailer |
| +<< /Size 9 /Root 1 0 R /Info 2 0 R |
| +/ID [(X¢|ß_ôü"K>êª)(X¢|ß_ôü"K>êª)] |
| +>> |
| +startxref |
| +21997 |
| +%%EOF |
| /schemata/mereni/IRmrak/ao_attr.err |
|---|
| 0,0 → 1,14 |
| Assembly Option Service has detected inproper attribute values |
| Sat Mar 25 21:25:35 2006 |
| Current Job : IRMRAK_blz.pcb |
| Format: |
| OBJ_NAME |
| OLD_VALUE{EMPTY;TOO_LONG} |
| NEW_VALUE{DELETED;TOO_LONG} |
| RESUME |
| /schemata/mereni/IRmrak/hispeed.lst |
|---|
| 0,0 → 1,2 |
| ELECTRODYNAMIC CHECKING REPORT -- IRMRAK_blz.pcb -- Sat Mar 25 21:50:00 2006 |
| /schemata/mereni/Teplomer/Meridlo.dbk |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/Teplomer/Meridlo.dsn |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/Teplomer/meridlo.opj |
|---|
| 0,0 → 1,81 |
| (ExpressProject "meridlo" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\meridlo.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (MAX241 |
| (FullPartName "MAX241.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (MAX241-223 |
| (FullPartName "MAX241-223.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (D-SCHOTTKY |
| (FullPartName "D-SCHOTTKY.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (74HC4094 |
| (FullPartName "74HC4094.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (2016/6116/9128 |
| (FullPartName "2016/6116/9128.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (78XXTO220 |
| (FullPartName "78XXTO220.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\_WORK\POWER.OLB") |
| (DeviceIndex "0")) |
| (BAROMETER_MODULE |
| (FullPartName "BAROMETER_MODULE.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\SENSORS.OLB") |
| (DeviceIndex "0")) |
| (BAT-CELL |
| (FullPartName "BAT-CELL.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-REST.OLB") |
| (DeviceIndex "0")) |
| (PIC16F873/876 |
| (FullPartName "PIC16F873/876.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\MPC.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 646 0 328") |
| (Scroll "618 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\MERENI\MERIDLO.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1"))) |
| (LastUsedLibraryBrowseDirectory "E:\library\ORCAD9x\MICROCHIP\_WORK")) |
| /schemata/mereni/Teplomer/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/hydrostat/MERIDLO.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/hydrostat/MERIDLO.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/hydrostat/meridlo.opj |
|---|
| 0,0 → 1,31 |
| (ExpressProject "meridlo" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\meridlo.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (BAT-CELL |
| (FullPartName "BAT-CELL.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-REST.OLB") |
| (DeviceIndex "0")) |
| (PIC16F873/876 |
| (FullPartName "PIC16F873/876.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\MPC.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "E:\library\ORCAD9x\MICROCHIP\_WORK")) |
| /schemata/mereni/hydrostat/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/increment/INCREMEN.BAS |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/increment/KLIC.BAS |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/increment/bak/DEMO.BA_ |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/increment/bak/INCREMEN.BA_ |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/increment/bak/KLIC.BA_ |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/increment/bak/VYSILAC.BA_ |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/otmer/O1.PDF |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/otmer/O2.PDF |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/otmer/OTMER.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/otmer/OTMER.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/otmer/OTMER.ONL |
|---|
| 0,0 → 1,487 |
| (PCB OTMER |
| (description |
| (timeStamp "2005 08 28 20 53 50") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "Otackomer") |
| (date "Sunday, August 28, 2005") |
| (document "Kaklik") |
| (revision "1.0") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device},{Value}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP1 |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000099E) |
| ("Source Package" JUMP1) |
| (Value JUMP1)))) |
| (component CK050 |
| (place C2 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 00001C9A) |
| ("Source Package" CK050) |
| (Value CK050))) |
| (place C3 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 00001CC3) |
| ("Source Package" CK050) |
| (Value 100nF)))) |
| (component ARK210/2 |
| (place J1 |
| (property |
| ("PCB Footprint" ARK210/2) |
| (Device SCW2) |
| (timestamp 0000012F) |
| ("Source Package" ARK210/2) |
| (Value ARK210/2)))) |
| (component "BRIDGE-SQ" |
| (place D2 |
| (property |
| ("PCB Footprint" W06M) |
| (Device BRIDGE) |
| (timestamp 000000E1) |
| ("Source Package" "BRIDGE-SQ") |
| (Value "BRIDGE-SQ")))) |
| (component "C-ELYT-CE050X10" |
| (place C1 |
| (property |
| ("PCB Footprint" CE050X10) |
| (Device "C-ELYT") |
| (timestamp 000000CB) |
| ("Source Package" "C-ELYT-CE050X10") |
| (Value 100uF)))) |
| (component LM78xxT_TO220/L |
| (place U3 |
| (property |
| ("PCB Footprint" TO220/L) |
| (Device TO220/L) |
| (timestamp 00001A45) |
| ("Source Package" LM78xxT_TO220/L) |
| (Value LM78xxT)))) |
| (component LED3mm |
| (place D10 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 000003FF) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D11 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 00000415) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D12 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 0000042B) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D3 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 00000365) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D4 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 0000037B) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D5 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 00000391) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D6 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 000003A7) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D7 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 000003BD) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D8 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 000003D3) |
| ("Source Package" LED3mm) |
| (Value LED3mm))) |
| (place D9 |
| (property |
| ("PCB Footprint" LED5) |
| (Device LED) |
| (timestamp 000003E9) |
| ("Source Package" LED3mm) |
| (Value LED3mm)))) |
| (component RL090 |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000013AE) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000013C8) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000013E2) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R5 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000013FC) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R6 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00001416) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R7 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00001430) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R8 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000144A) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R9 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00001464) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R10 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000147E) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R11 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00001498) |
| ("Source Package" RL090) |
| (Value RL090))) |
| (place R12 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000014D8) |
| ("Source Package" RL090) |
| (Value RL090)))) |
| (component _PIC16F505/508/509__14_PIN |
| (place U2 |
| (property |
| ("PCB Footprint" DIP14_300) |
| (Device DIP14_300) |
| (timestamp 00000287) |
| ("Source Package" _PIC16F505/508/509__14_PIN) |
| (Value _PIC16F505/508/509__14_PIN))))) |
| (library |
| (image _PIC16F505/508/509__14_PIN |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE2.OLB) |
| (Device PIC16F505/508/509__14_PIN)) |
| (pin 999 1 |
| (property |
| (pinname VDD) |
| (pintype 7))) |
| (pin 999 2 |
| (property |
| (pinname RB5/OSC1/CLKIN) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname RB4/OSC2/CLKOUT) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname RB3/MCLR#/VPP) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname RC5/T0CKI) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname RC4) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname RC3) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname RC2) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname RC1) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname RC0) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname RB2) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname ICSPCLK/RB1) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname ICSPDAT/RB0) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname GND) |
| (pintype 7)))) |
| (image LM78xxT_TO220/L |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\POWER.OLB) |
| (Device TO220/L)) |
| (pin 999 1 |
| (property |
| (pinname IN) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname OUT) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname GND) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname GND) |
| (pintype 4)))) |
| (image RL090 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "C-ELYT-CE050X10" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device "C-ELYT")) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CK050 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image ARK210/2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device SCW2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image LED3mm |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_OPTO.OLB) |
| (Device LED)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4)))) |
| (image "BRIDGE-SQ" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_D.OLB) |
| (Device BRIDGE)) |
| (pin 999 AC1 |
| (property |
| (pinname AC1) |
| (pintype 4))) |
| (pin 999 AC2 |
| (property |
| (pinname AC2) |
| (pintype 4))) |
| (pin 999 MINUS |
| (property |
| (pinname MINUS) |
| (pintype 4))) |
| (pin 999 PLUS |
| (property |
| (pinname PLUS) |
| (pintype 4))))) |
| (network |
| (net N03602 |
| (pins |
| D4-C R3-1)) |
| (net N03646 |
| (pins |
| D3-C R2-1)) |
| (net N02236 |
| (pins |
| R2-2 U2-2)) |
| (net N00325 |
| (pins |
| D2-AC1 J1-2)) |
| (net N00363 |
| (pins |
| D2-AC2 R12-1 J1-1)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| C3-2 C2-2 D2-MINUS U3-3 U3-4 C1-C U2-14)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| D9-A D10-A D7-A D11-A D12-A U2-1 D6-A D8-A C2-1 |
| C3-1 U3-2 D4-A D3-A D5-A)) |
| (net N02671 |
| (pins |
| U2-5 R12-2)) |
| (net N02480 |
| (pins |
| J2-1 U2-4)) |
| (net N00512 |
| (pins |
| D2-PLUS C1-A U3-1)) |
| (net N02352 |
| (pins |
| U2-7 R5-2)) |
| (net N03748 |
| (pins |
| D6-C R5-1)) |
| (net N03381 |
| (pins |
| R6-2 D7-C)) |
| (net N01585 |
| (pins |
| R6-1 U2-13)) |
| (net N01643 |
| (pins |
| U2-12 R7-1)) |
| (net N03320 |
| (pins |
| R7-2 D8-C)) |
| (net N02070 |
| (pins |
| U2-11 R8-1)) |
| (net N03293 |
| (pins |
| R8-2 D9-C)) |
| (net N03249 |
| (pins |
| R9-2 D10-C)) |
| (net N01752 |
| (pins |
| U2-10 R9-1)) |
| (net N03188 |
| (pins |
| R10-2 D11-C)) |
| (net N01810 |
| (pins |
| U2-9 R10-1)) |
| (net N01868 |
| (pins |
| U2-8 R11-1)) |
| (net N03161 |
| (pins |
| R11-2 D12-C)) |
| (net N03707 |
| (pins |
| D5-C R4-1)) |
| (net N02410 |
| (pins |
| R4-2 U2-6)) |
| (net N02294 |
| (pins |
| R3-2 U2-3))) |
| ) |
| /schemata/mereni/otmer/OTMER.asc |
|---|
| 0,0 → 1,89 |
| *PADS-PCB* |
| *PART* |
| C1 C-ELYT,100uF@CE050X10 |
| C2 C,CK050@CK050 |
| C3 C,100nF@CK050 |
| D10 LED,LED3mm@LED5 |
| D11 LED,LED3mm@LED5 |
| D12 LED,LED3mm@LED5 |
| D2 BRIDGE,BRIDGE-SQ@W06M |
| D3 LED,LED3mm@LED5 |
| D4 LED,LED3mm@LED5 |
| D5 LED,LED3mm@LED5 |
| D6 LED,LED3mm@LED5 |
| D7 LED,LED3mm@LED5 |
| D8 LED,LED3mm@LED5 |
| D9 LED,LED3mm@LED5 |
| J1 SCW2,ARK210/2@ARK210/2 |
| J2 JUMP1,JUMP1@JUMP1 |
| R10 R,RL090@RL090 |
| R11 R,RL090@RL090 |
| R12 R,RL090@RL090 |
| R2 R,RL090@RL090 |
| R3 R,RL090@RL090 |
| R4 R,RL090@RL090 |
| R5 R,RL090@RL090 |
| R6 R,RL090@RL090 |
| R7 R,RL090@RL090 |
| R8 R,RL090@RL090 |
| R9 R,RL090@RL090 |
| U2 DIP14_300,_PIC16F505/508/509__14_PIN@DIP14_300 |
| U3 TO220/L,LM78xxT@TO220/L |
| *NET* |
| *SIGNAL* N03602 |
| D4.C R3.1 |
| *SIGNAL* N03646 |
| D3.C R2.1 |
| *SIGNAL* N02236 |
| R2.2 U2.2 |
| *SIGNAL* N00325 |
| D2.AC1 J1.2 |
| *SIGNAL* N00363 |
| D2.AC2 R12.1 J1.1 |
| *SIGNAL* GND |
| C3.2 C2.2 D2.MINUS U3.3 U3.4 C1.C U2.14 |
| *SIGNAL* VCC |
| D9.A D10.A D7.A D11.A D12.A U2.1 D6.A D8.A |
| C2.1 C3.1 U3.2 D4.A D3.A D5.A |
| *SIGNAL* N02671 |
| U2.5 R12.2 |
| *SIGNAL* N02480 |
| J2.1 U2.4 |
| *SIGNAL* N00512 |
| D2.PLUS C1.A U3.1 |
| *SIGNAL* N02352 |
| U2.7 R5.2 |
| *SIGNAL* N03748 |
| D6.C R5.1 |
| *SIGNAL* N03381 |
| R6.2 D7.C |
| *SIGNAL* N01585 |
| R6.1 U2.13 |
| *SIGNAL* N01643 |
| U2.12 R7.1 |
| *SIGNAL* N03320 |
| R7.2 D8.C |
| *SIGNAL* N02070 |
| U2.11 R8.1 |
| *SIGNAL* N03293 |
| R8.2 D9.C |
| *SIGNAL* N03249 |
| R9.2 D10.C |
| *SIGNAL* N01752 |
| U2.10 R9.1 |
| *SIGNAL* N03188 |
| R10.2 D11.C |
| *SIGNAL* N01810 |
| U2.9 R10.1 |
| *SIGNAL* N01868 |
| U2.8 R11.1 |
| *SIGNAL* N03161 |
| R11.2 D12.C |
| *SIGNAL* N03707 |
| D5.C R4.1 |
| *SIGNAL* N02410 |
| R4.2 U2.6 |
| *SIGNAL* N02294 |
| R3.2 U2.3 |
| *END* |
| /schemata/mereni/otmer/OTMER_blz.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/otmer/V2.PDF |
|---|
| 0,0 → 1,285 |
| %PDF-1.3 |
| %Çì¢ |
| 8 0 obj |
| <</Length 9 0 R/Filter /FlateDecode>> |
| stream |
| +~0¼ oð¥\OÊõùe P^Óã\Ãc Ð_lã$²cµR<E;Åý5ãVXáþúoÿå¯<{}ý² |
| +8{1øa0Kd_Êõ§ ®¥ïóYWvf.À¥ ±6Ðw@ãÄj½{ |
| +vÀý5ã:Æü£ ,,`A Ø*xñd§Æ,,`B ða 0¡% |
| +¬ÁÁ58°;¨)^o[>±2¨à |
| +h\ÇXÿ#à ü]vû`oÁÜ>x 6^v2ë|²?ËÀ+;íÕµk}y¬Xêá$vÖbÒ®¥_»\Xó}°O*μÿüÏÿkå¯ ã(Ï ËàA©_[ëp/}Pæ£ uÿ¼Ö |
| +\©KÀ 7 ÀÑ·c^=E;àþqcQ1 Úî@_u^¨Í®£ |
| +OV_É̳¢¯WËbePáðÄR!N&àùqݤüÿã58Õ ÂP |
| +âÕóùÌÂÁ:Óð¥\yÃÕ×\¿$å1°çÌi÷Lµ¦¸ |
| +ì½£YÅc PîJøÀ¬L+eH1Ý=ó5åZZ ó¶L*ü0*¸¶¶ |
| +*¸6éÆ: -í\/'ÞX&*ÍE/ü0ÃD¥¹h©0-æ¢Üa¢â¢v4-梥Â\ô;LT¾bUÌc è+ÍE]À a ¯4½Y=Co ¹¨ xì ÚÐ\ô |
| +j ºy}bå)æ[çkk bAþA@=7¸*ü0X<²+à=~O¶Ö=;Ív²×9´è.Å`§IêçÄÒ}R´F¾v¹- Åüë@?_ݷئSÍàÁST¾.7µ±J(붼d`·¼:+b °M§u¡~bÕ)Ö[çkbAþ¯æòZ¬}U¯Áz(àërýdõU){% &{'piB,¦ET}xbÝy¤íàP¾v¹^!ä ô ^ |
| +óS°° ,(`A˪.`Ym@v |
| +èQQÀÂf0¡L(`FKÐk$ ×(ý¸æÀ ÎÎE· °X 8;88 h\O~ÈùG XÀ&0£,,`A3 |
| + 4Nö :8 8* |
| +P¦b.`k `« à&àwϨ'Eð|írÄü£\,àB x|ò6CÉ7Qɪqèh± (à` |
| +8QÀt%srÝHÀ«d (à` |
| +ØA@W2VÐö8;)óµ^%ù} >L(}80w(ìø0!Y5®Â0q@"ï0q\(àbx Ì? |
| +8XÀÁp°\(àb |
| +È^xî´åÀ=Ô¥½ÄºFTâ°ctùÚåZXò Øÿþ_¥¿ÿ×ÿÿÏ_¹µpoYíµ¶ÂÜý ßx¾þú¯çÐéõõDøaPãøu¹û͹ÉXo_ÀèÉÀþ¡Ë@|·u¹ |
| +ðîîØþÈ®î»K4½ óâNIU÷ÜF·OHBmí3àtwÙÚÚçÃéB»®Ü>s¾ç?ÿȶ¡LgEþ©ûB |
| +å#/YnµÕ6H lÝ«0#§·?"6éo´]+ |
| ++ ï®_ÆùÎYÆÔcðâ`'æ< <74R bnK?¬;¯ßr;ÝÚÌ0ûÓ e[QOÝí*}tgË3¸·Õm'ÔÁcµø² ª |½Õ ïOvØ`¸Ý(ì¸FÍÌ×È|ÛÛÙÍ2 Ç5Æ î¼CÏÀ¸ð ×´ýnãÌ«ßé¿ÖÆÖP?6[ üºÝPp{A_o?"pÙGA'ë¿$î6 ésݸ{£Qá[÷ Ó\¶³ |
| +WÀ¾ç³í!õ}®¼÷`mM¹kÁã>ãñTÅ6TÁ?j²êÖ>úl6Yûè°P¨g%#H¤C¡nT wBÛø¥i/yÍp7XêósBïÅJ Hw]nùÍ@H@Nª§à¤ûøõî#gwûlò |
| +7E8K<wg Àµá¥pî$u mþÃ÷I ôó{S ."=xéÉKÀ/Ê=,+»'ü0¨Yð˸ ¤¨ºM¦ ÚLE¡æö½ Ѳ}íÜ@0-Eý¢tòl_ÜÝuûâ4ðª:éaPuÝo¢Éñìåv»GÁø 'åíXª·õÜÕésw~ãθòÿKg`Z<IhL9Ò¾ !ÜK.|é¶à4{Ï0 j"ç@Tʨ~Ïñáà t=¤Pm6ƶ ï:¹ ¢ev'gFµûÈcì[Ð<¡gÿðÜi]ßb׫®ÂÅ;«¬ÝE˪7!9,\v)mWa½cqZ÷µ®Ã^p"çà,[~îiÝØçr~ÆúZ°]H@X3M³@øaPç ~§ã |
| +<^î ? êî_Ê%m4}âÄ´_ð\fOÐáöy»Ù"u+â!]Bw4$sæ4y5ì¹íýA¦ºÍnßï â¸ãì èLs<°O²É²ÿÉp'4@RùÈ-óE7 HàTî¶ ôluöÁX $ä ¯xP$ÛmB¶ó£!-×ÎFk¾Å:ÚrÕ!À/²( Èi Ù»5[±mR 6Þo× MAC`Yä®×i@»¿Øúy÷ß_lw.~Íòú ¯n jÖ|ZÙæ¦õ ~è ÂójÎ »ÿüEîî< ü0¨úÀ¯Ës |
| + ½(ªñ:£pD®ç |
| +¸öáÎ7TvÏï@ýÈID7±ä^¯ |fàäfgMMç^Be] |
| +¸ ªÜ r |
| +ÈæJ3017`KñMÖJÛèÓ ¼?ËbýYrT¬?OiÜwËUâvL¶ã&äà#ûnk| ö}Yoã= °»Fj¹D´ óK½LÈåoÀ4Þº¨_ÕEýª.èWWû ШZkj ªUlGNà |
| + AÞçÆ8²Ü8ø¥ýÙ91ì¼ \ÀÝsêl^jy+`ªY $·Ë´¹lµäÍÅ¡,VW¬ øGkÃ8©µÞ®6¨Y¡6ÌÊï]ÖäV»aÛ|éM]ç[/*°Ü 8# úlWZK~j=®<¬ PPª«Ïk¬;¼fÏÞ ÷ ÒÇ`3A7 µáÜVîëú ÐIñ¯ |
| +ß³Ö9Ûí}¶/À |
| +24¡K@;prª#ÀNô ¸äè¸ÝYÚ^;Ñ $ÚËôè]nû±´Ã= |
| +}îIdÞ5µ°ÚWÛòj«×ã4aªOñNT1Ûxb ²¶?áÖû<PÙ· ¶º7±O /°SÚܬ¾#àØõ³¶ ®ê5¾ª'ð~dw¤åß5®ºÒ íkH½Ï$w2±'ÇËN:ÚÄ ¹mt OÛnü@º2§VúEøOn2fÍ@¿åfü0V?àË8ÍÜG ±È³È³Èvme÷ß ÙîÍ¥ÇGÍKýùÓà± Ö¬$Ö¬ I A¬1I¬1I,»¿&Y$+£XebÖêÏ_?±Ü5¨B$(Vf±2U@»ë& XvG.ÉÅYbe+³XÅÊ,VFI±ÔJíÓ ewÕvÖíÅb=(VB±rýùÓà± Vï$Öu'¬ñ XrckØGÚG YÛTDç |
| +H,»ä"ÙĬտø´¼ |
| +½ â}G!ßióÚÍ9ë|êú k;ó§Ä¡¶² \ÞÛ:D,¹ñøô?}Q ~Áç£yÖ6=¿¶åÛ.þÅUb@o Ø×p ¾@1 ·ØÿßáàÇÕà 4ËÏ*6Aúmîò ?Rnºßí.ù~ËÚMªú \ív îǬ±møÕ×Ú¦ìh6}>ÒÄ]úMcß åÞEñÝåݤï.ïkW |
| + |Ýém+EöCÝfþÀ |
| +{¥ ÿeç ñÐ wrÀÍóå I&ÉiŬÁ)lÌÃsxzáÙ ¾ÎåØôwÓ´| 2*HµD¸iV |
| +ìN ðíÄÓ~ød(xAÜ@ËÈ-{õ |>øzq¥W$ª Êß >2;}do¯[B¯Ù+bñþ(¡qåvNàÖcÉ(0ú âÚê¼ØMNáË]/lÛd/êÜáä¦<¦8 &!å#ã¶>"Ë [ýk=AÀ6 ç\Ê ¬e 8#0=72·j6ÖÈ´¨Yn¶VC¶¢W Í Êý¢À¢$±Ô¹ñIÑØ^=Eî_%ë}rÿÊ |
| +íÙäy¬°vgzL>»'($ðõÞ¿zSþ ¼¹%ñ¯tp²op¦I |
| +;(·»°cß*©ORI |
| +ØnÔýááÇXغùq=Òh7êêCwjÓ`7꾯¥-+ìFáGf§H_Ý( ÅâýQBãÊôjغÉ( ݨ ¸ ©´u¯\^=Ra7ê WÚz˹ ©´uáÕ#v£~øìÿTJ¨ËÞC»¸z69 è |
| +Ž§|ãw¦BÀ»¯J×d3ÿ½¦ª¾Þ ) gVôj»)uú§qrõ«@¯®´Þ¾>b4Ö^]õjy"írRÈ÷eÐ#ßdHq |
| +!kR®0ë¼ØE& |
| +?õC¦ ¾~ËÝ\ |
| +uäR¨#+$p'Æe¿å |D *Ô-!y§@G.åùãÆ [qTS #k2 |
| +2ud ¼#ÛµÔÃÛµÔÓÕ[ëù¢îÜÓ¼#ë oGö¸í§Ü õbÙû`Hàvdw伨#+ü`HÀ;r.ÔõÞéíȹ@GÎ:²Ýd=]2Ã^Ù½ÿª`PGVO9'VIÐÜl4Ãg ¡#£ Éòr;²eûÝà#ÿ¶¸#ü0V%ðe+\ÎÞÞN±u!¼ xöUØlûtoä¤v7$ìÜ´ýqYfY× |
| +ÐíPÝîÜë/0LÐíKbº²Úþaé9eÀ?ñ' ¶Z þÎÈ(p{{} *µ¨| Øå³r(Ö·´aöy äæeOçÖ¼ls]P> ¡,{ÔP2¨ z%ìX9À6ÊøzûlMêþé zo?Îs¥»¶dq o ü2® Wý#©5*Î:çu=¡ÅYô<ìIjó§Ä'gNTêý|D])x¨8¯Dðõö#îíþ Å©oQ{qêå§ÏuBqBÅ©Ç«@qS§j·8íY¼S¥BqÞ)ÞÄ÷ gYT÷`ö|dAqIÅ©À×Û¤âTx:\ñâlÓ× |
| +¡8ü2® ÅÙR(N{ñú Û·8[âliþP¶[¾Ërâ(Î6 8[§âl}~ã¾Þ~D §B3g_T¾5§SÁ/ã |
| +E5ÃPtÁ/ã |
| +ÖÏ·_\¾~¾}øõ_ñ|ûðõáòõómåCùúùöá[âòõómåcüÎåÛsø~ ÌP¾ËÖ Ò~ý|[y¨ó.ÇÇþux.ß¹BúëÚgÅómáçÊ×Ï·o\>~¾}øôpùÎÔåëçÛÏ)|?æGÈ¡úÁómßÏ· \~~¾}øZ"?!ýFåçÛRÿ~¾ü |
| +çÿòáIoøý}oç× ík GûÚS?³SüÛ ó3ò£û/Z??\¿ þ¡üáþÖÅÇý¿Wëg oßaÿKx_ ïëÃ÷oÇû7ò¶_ö·øþÔÄãùmß/«¿¨}'\¸>=ò/âq}®õó ?bÿпïhýP|Ü :é»~MáþÆoëçó¼6¬OüÄñSïë{áy}_ðþ¾ õ¿ç ~ÿ =öñÛï×é[Æ ¿8Úõö2߯ùGù3߯ù߯S ÚÏq®[aýà÷ëÇõKÃûu_8ó uï´¾lx¿NyèÛe®ß¯;<Î?ÅImãòÁõa!û|áÑ>¿ëÁßû#ö ðbû§ïãþÓi_ ÒÇýåÙ |
| +_xðÄò-¼*ýÛïw |
| +ßâø4 þ ïïjÿ ôqÿPû×åýwí ùEý§¢}ðhß!ó»Þ(ýNý³âýÖ±íð~«>Çûr å÷ ïqüôýÁ!ûWOÐ?~~ |¼ W«ëß4 BùúøÂþîI úWØ?W¾0 õ)ìkþ½~ýz"ÏûïgêcðØ~Ú×È£íÊwýýýQ÷'Õï¶ß¬ë·âý |
| +? ²¿Ù¡ó~¿Zøx¿ºÖbõ'oɯ?Qèn3Cçý~·ðñ~÷+AËÿ¶Ð¿¥AºýÍ(÷ûåÂÇûåµýçØö¥ì?G&ûQ :ï÷ÛGué[ûØö¡5ÚV³ =|´ ã·ßçOÂÇû+µ/æcþ\ ÿMýØáãý:9þñ}~#|¼¿RÍþJùp>í/Æ |
| +ßâýföOÊûu¢g|ñÓd>oËT?-Ø×Ü_åÛ |
| +ÕO÷WZáø%ƯT¾-Þ_iê§û×ùX¾ê§Åû+sü ã.ßxÅÞi¸|¬Éå;cùN®ëgqüã/.ßx¿®?T?ý õÓo÷ëzjÌúéãg¿U¼8ªCß¿x׿µTýDö}cog¢}ðî¿Cxôß¡ùóò_ßïG¾>hõÛ ô Ù÷æÐy÷/"<ú9ß÷öÑ Â÷]C,Ôß ìGsè¼û?¾=Q~_ô7÷;_ 4ù{6xÒ¯d 9z°Þý³þYÎ÷}þº·Óñþ¨ò¿Î÷G7÷Gå½r¼?zxoßÂkß>>õaã[ûÜö_x¿tT² àkÛy÷_#<ú¯ÙóS¸:Æ»û©ÝÇÇý tñq4² #Ø |
| +ïþuGÿ:çéxïûáo÷_»¿¯åè ¾ |
| +û p¿vÌw÷k»ïûí×㻤ïûÿcº9ÛáåÀsöaû@ îïý |
| +è·û»}üò´ù ù;ÙÇåððì¿ï'º <COßÏÆ |
| +N.ö'{îÏOQýüÄç^ã÷~R8ßbPZGûi°>Ý<Í_·~û ÂãýÂ.ìþ ï÷ïõ ÜÏ)ñýlüþÁg¡SÔOv¾µy:ßÚùû áÑ>gïß |
| +û8åëõ¿Õ Þ/ܸ?9÷KÕßîOöÙï°~Û |
| +ì6OöA* ñx¾·×ßpÿ}ñÕõKì Aë×ó?yý1&ÝÏ ïgHøü|¦ÅóóÛÿ9ñù¥oîwîýWðß0·;Gôßpâ{ùÉ+ÒX~éAÿs÷ßüt×Ï{¥£~~áCøÅ÷?T¾ <ßîû-áÙ~Ë Nl¾¸; |
| +¨ ï »8pý§ò[ùÊsä¸>Xt¿dÊ#ðy ø6>ϽþÁû·ÊgæáûË/ßù~äßïÌæ×I÷ Âw¾! ÒïOÌÎñþÄi¶þ}ðýi~ÿaÂ÷ N zÿÙóK¼ß î÷æÿáý S ¶þ{~÷fuÿÍï÷ßÑþÿßkû@ûûS 6¿X2~Âübv²\»¹£}äÚïï¬öwæÖ_~~¿¶þÀóû¹Ç×+?¬ ¤Àýüue?U~âþÓÊaÿéð¦?V |~qx_Önàþõ¬Ô?Ö^.aÿXÿÂãø?÷Ôç7kW7ÎoLàûÇ·¹ÈÀáoùïÈãþ±öïÛ~ÖnN¸³RÁñeÕÄãËÜúÉ秫ùéù¾í_¬Zxÿø|ßÚçÚÍ÷V¨_×¾?úuîÏ OÔ>'î/¯ê¿oí¿%ÞZâ0Áã·à_@:løç¿çû¦¿ø1ýu¾oû[kw7ÜßZ[?d?YÿÍ1pþ+<Îõû¿ÅûÓú}«¿xÿì4X¿ï¡~ûBÏ_ Çùëù¾¯kO×pÿ[¾?·úàý9iâO çxpþ¶úâù~"ûë·ùëÚÉáþºòùؾmþ¶FØ_ ±ï/ |
| +¼ßGí ñ¾ÿ$<í?Mºvã¯qüó¿8ÿ+æqþW,ÌåêÇìµ|aÿôÔ ó9òfÿ¡õ×b|{Oëÿõÿpý?±þ ®ÿÀûsG> Ä>wxùýámæð¸?#¼Ù¯ íW6ïûÂÓþçïo¬J|?MÜÿÑø½ü¯Fù_-ä¿û³ÂýÑáÑþHø9GûÆy ® äѾWx³:<Ú?ø¿ ógö¿ _À¾ñ¥Yÿ[á×OþG ·ý±Ããþð¶?vxÚ xõð#Ä÷ýuáiýäÿy(ÿÏââSûΰÿÿâïÿ _ñ¸ÿ¯ú}Oç;yÿÍînÖù¹GûÊ¿)+3ß:ñÞì[4~ò}Æ/È'°¯ÜWؾRøåú{óxþ¹FûáÉþ@âÛþãOû3ÁþãáqÿQ&4Åç;}Ü?Þë+·ï}ñ í{çt¯ÊÓùÄ7ûá íOüÑ(þ`ÞÏ·N|<ß¾âñ|k·/·¯~ñí« 7ûÄã}¢ðøÆ÷Oox´?=ñ}üø8~KüL<Ú/íùÛ ~¶À/ Å\Çß÷3^|Ø¿Þöû¿g~ |
| +ªgûªîÎ otÿül5?t¶8 |
| +¹xÿs¬h¿> +ÆúºCåɾ÷4øü¯;Tù¿ |
| +:_= |
| +ö3gÁV¹}WÒ/t>๠m_t>vxlßÎ/Çù#íÿ ö'ܾ<®ß3ÜϾú+M*Ï·Ûbý¸BûîúWùuçöþd}йýv:_Là¿êò¸þìàLyÚ¿Oà îòP>ûAÎíýûÍöÀËãú²ÿ:åñ|f XôÊññ|OTn¿è¿kÊÛ/ú'{ÁÒ¹ý¢)þÙ¸ý¢ÿ¡ §÷×:·_ô¿&r;·_ðWR/hß"<Ø·¼ô?`<Ìdütû;åq| hyøãkBûKåq|ìhwøúcOØ&·o°ß:ãçäö=Q?A]âø ÇÇçÊcÿ§ó§Ãû1î_ðòaÿnrûÿvgCÛÏÇý+:?<< N:¿V ÷Ⱦæð Eö[ ïnÿwø^©~Á¾*-Ö>À~àðÛÿ*Ïó;8_<|øòàO^ÌCû}J%¾@þå~q}¯Oäó-¤ß8>ïüµÎ<ôÏFûÓóS>Ë·Çò x88õ38þÀùCÇýÇÃcÿ¥÷k.óJûgË£Ñö×àþÜå±}¡ÛÃWò_óØùQÙûîÇý[¼¦a}X:ó=ð¶þ><ú><ǯ1¾ ý ~0 ÷z!¾Çõ½í/*ïå_íÖ¿ý[Çýåð÷/ë¯Ã/._ß¿º|c¾ûWÇý«Ëwæ{àS" æ×ÊæGàs& æ×Êsü<¨ü`ÿåð¥PùÃþ òX? ÷_käó+ðã·¿sùö'òùøÁå;Rä¹~Füäø3Æ\¾s~qý¬ y.ßÊ×Ï_Çóå'ó1~¢òÅó1åó¡~ü|òð9o"ýDç¯Êsüã~¢óuå;ó¡~é'´ïyñþ`ºó¡ÿ¸}íá{</é'ô®<é§÷C_\?A?Áý åcüÅåõSfý£~ʬrÔOõS&ýäõY?å#?ý'³~Ê¥D~2 Ú¿ïo ¾Æø¬rÔOõSú)³~ÊQ?eÖO9ê'ßß:üñY?å¨2ë§ õSfý£~ʬrÔO¾¿¥|_X?¨ |
| +ë§õSaýT¢~*¬JÔO¾¿uø ã³~*¤*îï+ úOaýTj|g>ô ? :|ñY?¨ |
| +ë§õSaýT¢~*¬JÔO~¾®|Ïú©DýTX?ÒOdßqøÚeýT'òùõSM)òùÐ*ë§õSeýT£~òýÉÃõSú©²~ªQ?UÖO5ê§Êú©FýäûÊÇø¬jÔOõSú©²~ªQ?UÖO5ê'ßT>ÆgýT£~ª¬jÔOõSú©±~j¯?à|íð× `¯|ë§Cÿi¬Zy"ßúÉï· ¾Æø¬ZÔOõSú©±~jQ?5ÖO-ê'¿_¥|X4ÖOmõGcýÔFè?õS5ò\?3´ß>ü |
| +1þÏï[à" Ïk¶ ù*^`û½ÐÚÏ¿ájû|öÖ¾ |
| +ü |
| +õ×å}!°¯÷ óÝí¯«»T^ÞOlÈw´¿æÿ\ùd üäà/ùòW¥Á¯?®|&ù ¸óì;X¾Àïò£ò Ü>_`¡üÁ~ßÝaBúÎ ÄøÏ_¯ÿû°ÃßóÅ?äáýÍÃ[û>p>\?cTâ¡}Aüëg@ÿèû}ùá÷s!¸·¿Ñ½ýzðÃËx®|§ô!¸òòÁµþ3ÉÁ¡}xù@pà'/Dpûuù³ûI äû! ÊÇο18/ð êÇÓàP¿?íÃåàо¼| ¸ë';ÿÓòÁù§Ä÷ùiÿ¢¡ÌDýø]`Óç»|fÎ\?ÓÖ_Üë×üRpà¹ãûg'B©Ä¿BíkÂýa Cp¯·ÏÆà^ÿÈûm©PH {ýCþ ¸×?ÈÁ¡~ |
| +S+ ®üÿ\ó¿7Tß+_àþæMbðÃÁ³µ/ ®éoËÂòÍpaÍö£ ã[ýCpqXY9>Ô¿4ìíÇo¾<O¦üCpåú×Äàßrþ>W^"Øù)W¾@þ(¸òäCþÌþ+_¡|)¸Ï° |
| +ùäàP¾ÕËoÄú[ë÷w6. 8¿9 4ÿT âûù3ò7ÿX\ù |
| +Á/:Î 8ß{8\%ûQJ_2û? ®¼8̨$/¡|º¿W~Ðí 8ðn |
| +"ßÞð å'P ÂYµø%kî|¶E |
| +?å·2ÈOÁOü½s^|¢Üí5ãCp]¤Qûù¨ýíöi¼\±tVâÓ"_¬j} |
| +y½d |
| +FørÉoÁ%ÅPÿÂ%°ù·CÖsIQÜÚt'®Õ;|ÅK Êß&YX ApÍ üÉÍQãËZs!ÙX^ Üã»ëÉ 2c¥-ÿNãË ¿M üɪÑì'þ 'µÜywÂÁµü3lPpáÅ -ðüè§Ä\õ9Âîª<Õ/wÞÛO]rîý{{õóþu¨à!|Ðy ~xqòbõÁÇüAð#ÿ.°dN~äû`d~xwÒ ÁOúb]þоÎ÷ÝIdçm|®üK |
| +=vþoâÊ%Æ òWh~r{ »~v'}ÒÇô·å»~m4¾`þÂ']â$W¬¶HÁà~õñ%ȯ º~ù~Ø"G!|_ /ÙQÁ½»ÏºøÑáK§þùöHóá1òË׶O:/ò~à õ/Xä |
| +óG"¥¸Ó<Ï¿èÉÀîOlÿ¡}SúmQ½¤9CûN4?û]| ®ó/rRÛBÿ8¼;¹Âà®ÿý |
| +¹¤kg )àgüI>÷úivÕuò'Fþfd Á'ºÜû;9ÆàÞ¿à%ÿïNNOsý×âSðÓ¾ ;AáÖxtrÁµl¯{× w tCpï?Ù´!¸ðEnEû# 5´áíL |
| +~Ò«b1ø)^mÂþnþ><âzÛ'7~»fº<×ùÑÄïcðwùÃà¯ò±$¬þþÿ×_ÿí¿ë²÷: ÇOÊB6ðõÝ·o ¡WÞ¾ÇxGH®ÒßxKk¿?Èñ8ϹzGH ½÷=Æ;Bä(?Hþío¼%$ÆøAwDúû¿[°`ß·®^P;A_Æ-å²mdÈÕ¯ þ97Å«ën«=¦±ÎУ) ð¾Ý`\ÅXǶçZ»5,¶â!Hà˸¥\·?Blß¼²³ª ®B¬ºX=b»¯].a,ÈãpÎC ÀqK9pdpä ¨ [@Èê¥BMÀóµËUòðÌI²${×ü |]î¨×}n¬à1ðÏÞG ÀIßXNÿüuaUnØLMñI7 |Í8yqR%7+I@ ®zgò|Rolì(¸'/M-PS¼ê³k |
| +Tp4n a±T°U°UPÁÐ9yqÝ»/?dP!+à( ^Ê9ÙQp4N^Ô¯z3HcePÁÐ9y+ÅJf¡Y¬d* Jf±Y¨d*ÅJf¡Y¨d+ Jf¡YQÉÐÎûÞÙ#%s!¯ËyðÐ9ñ J榨¾ xý2j¤dÃXG0yA0¹à |
| +Aɼ IÉ8'~ dnWÀ JæZâi¤dÃXG°yA°¹à |
| +XAɼ XIÉ8· ¨ dnWÀ |
| +ê]-bì^'ÖÒIÑjð|Í8y´óåSíÿkë\²$Vq :ïÕÌw½7}ã\W¢7ªúÔ(,P¤( Çü@´Áþ®û{; ^[¡WÉ#ÝÈ» ê-FÜÞ[ؽ#2ÈÄÉ ¡È`Ü.Îo7ó{ßÌÉEÚ:nMd0næÕÁ{±Þ2^¯L ®L |
| +L/ÄWèÏWè ÁìÓeù ç |
| +7j× 1"Ue¢ªLTÊDU¨J¨*2Q)Ue¢R&*e¢ªLTÊD¥LÔù;EjQÌl |
| + Ô¢9{}~ï"µèµuÌZ4ç¨Í µ(f¶7Ô¢× 1"Eu°¨ê`Q ,ÔÁB ,ª :X¨Eu°P u°¨ê`¡?:øh©öh©ö°T{´T{Xª=,Õ -Õ jKµGKµ¥ÚÃRíÑRía©ö°TãâK]´Ïnf |
| +øÍrQW»üÌ mÚ¼¶B/f0`sÛÍ ·ôÞÂÖéÕeÐbËFçMF è· ëÒo$NÞdü[¼ ¯o2AÐo$Þâiëôê¿n2Fðî)³ãv!èP@tE³.]ë,ÔA õÚ |
| +½¨AеÎ[ìB0m^ýAlÊë¬d |
| +!ê»Þâ!¶N/ÄÈ ªnÕÁM Ü¢íþÁ Ák{¼NÊT7upS·êà¦nêàÞ¿2x×&Î/p×& |
| +µh¬?ßû®M\ÀVèŵ7±þà-J-zm^ý×ÚDí«Kç+åwuI OØ\ÑÎM¾ô¸ºTûZ°¯ÅÕ¥ÍmwuÉ[L ´ÞÒF¯ýkuéçûd~ ÷Éð :ËÝ'ó¸O¦ÎgÂötx=Ü'ÐÛs÷ÉxIÐzK½ÊøEð{0!Îùß<§O ÛüÈÀ ðݹòø®ÔsÒ+ÓãlÅ [íðª÷TÀsáÝm3¿hl-ÞGèÓÛµÑ 1úÿ`g°_>nPÏLXMÚ·Ãöàz àb¨ëÁÓ¢ÎÀF¯öàÉàý¯¥eI |
| +È nfp3[3¸Á zAÿ¯{-dðÎXo L/Ä ^% ÁÍ nfpk73¸ÁKp1TóZÈ NÀF¯ö`ãkö »JþU(à¶~#è^ò,{W?ïþg3}Ú*¼ dÜÚ;èîeË^Þb IðÑ 1àV[ nÜJpà&Á7 nÜJpà"Á¥ ®ý'FÄζ³K>iÁÑApt!xm^àh 8:ikôBF°sÜ[¾IõÕÚ7'|ÂæÓGí|&Ýï7 |_ã¶ïyéu@N:9ln;´NÖ[Úè Að¾ |
| +~.Èï= |
| +ë ~N¨ S_!¶s í µ |
| +A?lÕ½*Ö*¯^ÑKµ!Åv Rl |
| +ø-Ëæ>Pl÷!Åvï(¶{G±Ý»Û½èê(¶ûb»F½ÆïbÛ¾JðU/ ¾$OvÖe«§àµu<xàK/ ¾Jð%Á·ýïý¹à>Ñ |
| +ñlÞèO8÷þ¶'zSƳ¹yM¼OôÖÛÁô¿èÏGÒVÉ×ù÷Ê9¡ |
| +ø¤Íßú:ߢ·wâ~@Mpþc6lç<ðZwÞêÿ8,ñ ¿ï\µhà{áé-môBÌ`Ñ Í`af°2¬ÁÊ Vf°h 3XÁ¢,Ì`ibÁ;ñ{.¸¿`LáößÎøµÜ¦W_ »Öb×F/ÄèWÞØ?'BÄÑ|Òæ¯:~Gú eú¾<¯j}O ¹¶B¯- Aÿæ!oñͱ|zs[àÅÁ¡21T&eblÍàà >Ìà£|AÊÄPA*21(ãL ¡21(CebP&eb¨L ÊÄ L A¡21(2!«Kgö*C´W¢Q¶|Ò!ê%6 ú+CôÚ |
| +kÁÚàµÑ 1b^'Å ¡¢ê4Aâ ¨Kð ¶´u4ÐdF¨æÕ0D/Aëa¦×øEð¿?ÿm{QÞendstream |
| +endobj |
| +9 0 obj |
| +28454 |
| +endobj |
| +7 0 obj |
| +<</Type/Page/MediaBox [0 0 595 842] |
| +/Rotate 0/Parent 3 0 R |
| +/Resources<</ProcSet[/PDF] |
| +/ExtGState 10 0 R |
| +>> |
| +/Contents 8 0 R |
| +>> |
| +endobj |
| +3 0 obj |
| +<< /Type /Pages /Kids [ |
| +7 0 R |
| +] /Count 1 |
| +/Rotate 0>> |
| +endobj |
| +1 0 obj |
| +<</Type /Catalog /Pages 3 0 R |
| +>> |
| +endobj |
| +6 0 obj |
| +<</Type/ExtGState/Name/R6/TR/Identity/BG 4 0 R/UCR 5 0 R/OPM 1/SM 0.02>> |
| +endobj |
| +10 0 obj |
| +<</R6 |
| +6 0 R>> |
| +endobj |
| +5 0 obj |
| +<</Filter/FlateDecode |
| +/FunctionType 0 |
| +/Domain[0 |
| +1] |
| +/Range[-1 |
| +1] |
| +/BitsPerSample 8 |
| +/Size[256]/Length 12>>stream |
| +xkhÙ DÀ |
| +endstream |
| +endobj |
| +4 0 obj |
| +<</Filter/FlateDecode |
| +/FunctionType 0 |
| +/Domain[0 |
| +1] |
| +/Range[0 |
| +1] |
| +/BitsPerSample 8 |
| +/Size[256]/Length 12>>stream |
| +xc`Ù |
| +endstream |
| +endobj |
| +2 0 obj |
| +<</Producer(GNU Ghostscript 7.05) |
| +/Title(V2.bin) |
| +/Creator(PScript5.dll Version 5.2) |
| +/CreationDate(8/30/2005 13:26:12) |
| +/Author(Jakub)>>endobj |
| +xref |
| +0 11 |
| +0000000000 65535 f |
| +0000028769 00000 n |
| +0000029230 00000 n |
| +0000028701 00000 n |
| +0000029083 00000 n |
| +0000028935 00000 n |
| +0000028817 00000 n |
| +0000028560 00000 n |
| +0000000015 00000 n |
| +0000028539 00000 n |
| +0000028905 00000 n |
| +trailer |
| +<< /Size 11 /Root 1 0 R /Info 2 0 R |
| +>> |
| +startxref |
| +29379 |
| +%%EOF |
| /schemata/mereni/otmer/otmer.opj |
|---|
| 0,0 → 1,112 |
| (ExpressProject "otmer" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\otmer.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "OTMER.asc") |
| (OTHER_Netlist_File2 "OTMER.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device},{Value}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File ".\otmer.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\ORCAD9x") |
| (PartMRUSelector |
| (VCC |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (CK050 |
| (FullPartName "CK050.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (LM78xxT_TO220/L |
| (FullPartName "LM78xxT_TO220/L.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\POWER.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (TITLE |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (RL090 |
| (FullPartName "RL090.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (LED3mm |
| (FullPartName "LED3mm.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_OPTO.OLB") |
| (DeviceIndex "0")) |
| (_PIC16F505/508/509__14_PIN |
| (FullPartName "_PIC16F505/508/509__14_PIN.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE2.OLB") |
| (DeviceIndex "0")) |
| (ARK210/2 |
| (FullPartName "ARK210/2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (BRIDGE-SQ |
| (FullPartName "BRIDGE-SQ.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_D.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT-CE050X10 |
| (FullPartName "C-ELYT-CE050X10.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (BZX85 |
| (FullPartName "BZX85.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_D.OLB") |
| (DeviceIndex "0")) |
| (_PIC16F630__14_PIN |
| (FullPartName "_PIC16F630__14_PIN.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\MICROCHIP\CPU_PIC16_FLASH.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -30 0 200 0 403")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 44 914 58 495") |
| (Scroll "0 208") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\KAKLIK\SCHEMATA\MERENI\OTMER\OTMER.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/mereni/otmer/schema.pdf |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/prijimac/PRIJIMAC_CIDEL.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/prijimac/PRIJIMAC_CIDEL.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/prijimac/prijimac_cidel.opj |
|---|
| 0,0 → 1,33 |
| (ExpressProject "prijimac_cidel" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\prijimac_cidel.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (RS232DB9M |
| (FullPartName "RS232DB9M.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_CON.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\mereni\prijimac\prijimac_cidel.dsn") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\mereni\prijimac\prijimac_cidel.dsn" "SCHEMATIC1") |
| (Select "Design Resources" |
| "D:\KAKLIK\schemata\mereni\prijimac\prijimac_cidel.dsn" "SCHEMATIC1" |
| "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/mereni/prijimac/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/serva/TESTER.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/serva/TESTER.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/serva/tester.opj |
|---|
| 0,0 → 1,36 |
| (ExpressProject "tester" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\tester.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 44 690 44 372") |
| (Scroll "201 351") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "d:\@Kaklik\schemata\mereni\serva\tester.dsn") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/mereni/serva/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/vyskomer_drak/cidlo/MERIDLO.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/vyskomer_drak/cidlo/MERIDLO.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/mereni/vyskomer_drak/cidlo/meridlo.opj |
|---|
| 0,0 → 1,79 |
| (ExpressProject "meridlo" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\meridlo.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (OPTRON |
| (FullPartName "OPTRON.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_OPTO.OLB") |
| (DeviceIndex "0")) |
| (BAT-CELL |
| (FullPartName "BAT-CELL.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_REST.OLB") |
| (DeviceIndex "0")) |
| (BAT2 |
| (FullPartName "BAT2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_REST.OLB") |
| (DeviceIndex "0")) |
| (PIC16C84/P |
| (FullPartName "PIC16C84/P.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\MICROCHIP\_WORK\PIC18PIN.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (menic12V |
| (FullPartName "menic12V.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (transmiter |
| (FullPartName "transmiter.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\TRANSMITERS.OLB") |
| (DeviceIndex "0")) |
| (PIC16F84/SO |
| (FullPartName "PIC16F84/SO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\MICROCHIP\_WORK\PIC18PIN.OLB") |
| (DeviceIndex "0")) |
| (BAROMETER_MODULE |
| (FullPartName "BAROMETER_MODULE.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\SENSORS.OLB") |
| (DeviceIndex "0")) |
| (PIC16F873/876 |
| (FullPartName "PIC16F873/876.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\MPC.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\mereni\vyskomer_drak\cidlo\meridlo.dsn") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\mereni\vyskomer_drak\cidlo\meridlo.dsn" |
| "SCHEMATIC1") |
| (Select "Design Resources" |
| "D:\KAKLIK\schemata\mereni\vyskomer_drak\cidlo\meridlo.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 0 200 0 301")) |
| (Tab 0))) |
| (LastUsedLibraryBrowseDirectory "E:\library\ORCAD9x\MICROCHIP\_WORK")) |
| /schemata/mereni/vyskomer_drak/cidlo/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ohradnik/OHRADNIK.ASC |
|---|
| 0,0 → 1,40 |
| *PADS-PCB* |
| *PART* |
| C2 C-ELYT@CE020X5 |
| C3 C@CK050 |
| D6 D@DO41 |
| D7 D@DO41 |
| J1 SCW2@ARK210/2 |
| J2 SCW2@ARK210/2 |
| M1 PAD@HOLE_M5 |
| M2 PAD@HOLE_M5 |
| Q1 T-CEB@TO92 |
| Q2 T-EBC@TO126 |
| R1 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| R4 R@RL090 |
| R5 R@RL090 |
| U3 DIP8_300@DIP8_300 |
| *NET* |
| *SIGNAL* VCC |
| J2.2 J1.1 R4.1 R4.2 D6.C Q1.E R2.2 U3.4 |
| U3.8 D7.C C3.2 M1.1 |
| *SIGNAL* N16674 |
| R3.1 Q1.B |
| *SIGNAL* N12783 |
| Q1.C Q2.B |
| *SIGNAL* GND |
| Q2.E J2.1 D6.A R1.1 |
| *SIGNAL* N01146 |
| J1.2 M2.1 Q2.C |
| *SIGNAL* N22567 |
| U3.3 R3.2 |
| *SIGNAL* N22247 |
| R2.1 U3.7 R5.2 |
| *SIGNAL* N23162 |
| C3.1 R1.2 U3.1 C2.C D7.A |
| *SIGNAL* N22730 |
| U3.6 U3.2 C2.A R5.1 |
| *END* |
| /schemata/ohradnik/OHRADNIK.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ohradnik/OHRADNIK.DRC |
|---|
| 0,0 → 1,13 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking for Invalid References |
| Checking for Duplicate References |
| /schemata/ohradnik/OHRADNIK.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ohradnik/OHRADNIK.ONL |
|---|
| 0,0 → 1,334 |
| (PCB OHRADNIK |
| (description |
| (timeStamp "2005 09 10 16 17 13") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "Ohradnik") |
| (date "Sunday, August 21, 2005") |
| (document "Ohradnik") |
| (revision "D") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component CK050 |
| (place C3 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 00005A18) |
| ("Source Package" CK050) |
| (Value 100nF)))) |
| (component BC327 |
| (place Q1 |
| (property |
| ("PCB Footprint" TO92) |
| (Device "T-CEB") |
| (timestamp 000041A9) |
| ("Source Package" BC327) |
| (Value BC327)))) |
| (component ARK210/2 |
| (place J1 |
| (property |
| ("PCB Footprint" ARK210/2) |
| (Device SCW2) |
| (timestamp 00003937) |
| ("Source Package" ARK210/2) |
| (Value civka))) |
| (place J2 |
| (property |
| ("PCB Footprint" ARK210/2) |
| (Device SCW2) |
| (timestamp 00003962) |
| ("Source Package" ARK210/2) |
| (Value 12V)))) |
| (component "C-ELYT-CE020X5" |
| (place C2 |
| (property |
| ("PCB Footprint" CE020X5) |
| (Device "C-ELYT") |
| (timestamp 000047E4) |
| ("Source Package" "C-ELYT-CE020X5") |
| (Value 100uF/16V)))) |
| (component R0805 |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000069) |
| ("Source Package" R0805) |
| (Value 45k))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000007F) |
| ("Source Package" R0805) |
| (Value 10K)))) |
| (component RL090 |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000059EC) |
| ("Source Package" RL090) |
| (Value 10))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00005C02) |
| ("Source Package" RL090) |
| (Value FUSE))) |
| (place R5 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00005CF8) |
| ("Source Package" RL090) |
| (Value 220)))) |
| (component NE555 |
| (place U3 |
| (property |
| ("PCB Footprint" DIP8_300) |
| (Device DIP8_300) |
| (timestamp 000051E1) |
| ("Source Package" NE555) |
| (Value NE555)))) |
| (component BZY |
| (place D7 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 00005A02) |
| ("Source Package" BZY) |
| (Value BZY/15V)))) |
| (component BD135 |
| (place Q2 |
| (property |
| ("PCB Footprint" TO126) |
| (Device "T-EBC") |
| (timestamp 0000496C) |
| ("Source Package" BD135) |
| (Value BD135)))) |
| (component 1N4007 |
| (place D6 |
| (property |
| ("PCB Footprint" DO41) |
| (Device D) |
| (timestamp 0000513F) |
| ("Source Package" 1N4007) |
| (Value 1N4007)))) |
| (component HOLE_M5 |
| (place M1 |
| (property |
| ("PCB Footprint" HOLE_M5) |
| (Device PAD) |
| (timestamp 00005B0A) |
| ("Source Package" HOLE_M5) |
| (Value 15))) |
| (place M2 |
| (property |
| ("PCB Footprint" HOLE_M5) |
| (Device PAD) |
| (timestamp 00005DE2) |
| ("Source Package" HOLE_M5) |
| (Value 1))))) |
| (library |
| (image NE555 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device DIP8_300)) |
| (pin 999 1 |
| (property |
| (pinname GND) |
| (pintype 7))) |
| (pin 999 2 |
| (property |
| (pinname TRIG) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname OUT) |
| (pintype 2))) |
| (pin 999 4 |
| (property |
| (pinname RESET) |
| (pintype 0))) |
| (pin 999 5 |
| (property |
| (pinname CONT) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname THRES) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname DISCH) |
| (pintype 3))) |
| (pin 999 8 |
| (property |
| (pinname VCC) |
| (pintype 7)))) |
| (image RL090 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image R0805 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "C-ELYT-CE020X5" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device "C-ELYT")) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image CK050 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image HOLE_M5 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\PAD.OLB) |
| (Device PAD)) |
| (pin 999 1 |
| (property |
| (pinname PIN) |
| (pintype 4)))) |
| (image ARK210/2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_CON.OLB) |
| (Device SCW2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image 1N4007 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image BZY |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image BC327 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_T.OLB) |
| (Device "T-CEB")) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))) |
| (pin 999 B |
| (property |
| (pinname B) |
| (pintype 0))) |
| (pin 999 E |
| (property |
| (pinname E) |
| (pintype 4)))) |
| (image BD135 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_T.OLB) |
| (Device "T-EBC")) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))) |
| (pin 999 B |
| (property |
| (pinname B) |
| (pintype 0))) |
| (pin 999 E |
| (property |
| (pinname E) |
| (pintype 4))))) |
| (network |
| (net VCC |
| (pins |
| J2-2 J1-1 R4-1 R4-2 D6-C Q1-E R2-2 U3-4 U3-8 |
| D7-C C3-2 M1-1)) |
| (net N16674 |
| (pins |
| R3-1 Q1-B)) |
| (net N12783 |
| (pins |
| Q1-C Q2-B)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| Q2-E J2-1 D6-A R1-1)) |
| (net N01146 |
| (pins |
| J1-2 M2-1 Q2-C)) |
| (net N22567 |
| (pins |
| U3-3 R3-2)) |
| (net N22247 |
| (pins |
| R2-1 U3-7 R5-2)) |
| (net N23162 |
| (pins |
| C3-1 R1-2 U3-1 C2-C D7-A)) |
| (net N22730 |
| (pins |
| U3-6 U3-2 C2-A R5-1))) |
| ) |
| /schemata/ohradnik/OHRADNIK.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ohradnik/V2.pdf |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ohradnik/ao_attr.err |
|---|
| 0,0 → 1,14 |
| Assembly Option Service has detected inproper attribute values |
| Sun Sep 11 11:14:28 2005 |
| Current Job : OHRADNIK.pcb |
| Format: |
| OBJ_NAME |
| OLD_VALUE{EMPTY;TOO_LONG} |
| NEW_VALUE{DELETED;TOO_LONG} |
| RESUME |
| /schemata/ohradnik/eco.err |
|---|
| 0,0 → 1,9 |
| ** ECO In Report ** |
| Sat Apr 30 12:32:48 2005 |
| Input File : D:\KAKLIK\schemata\ohradnik\ohradnik.eco |
| Current Job : Untitled |
| No errors found |
| /schemata/ohradnik/ohradnik.eco |
|---|
| 0,0 → 1,27 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* old file: C:\Program Files\padspwr\Files\ecogtmp0.asc |
| *REMARK* new file: C:\Program Files\padspwr\Files\ecogtmp1.asc |
| *REMARK* created by ECOGEN (Version 6.0g) on 30.4.2005 12:01:05 |
| *DELPIN* |
| U1.3 N12890 |
| R3.2 N12890 |
| *PART* |
| D5 D |
| R6 R |
| *NET* |
| *SIGNAL* N16674 |
| R6.1 |
| *SIGNAL* N19365 |
| U1.3 D5.A |
| *SIGNAL* N19404 |
| R3.2 D5.C |
| *SIGNAL* VCC |
| R6.2 |
| *REMARK* Deleted pins: 2, Added pins: 6 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Sat Apr 30 12:19:42 2005 |
| *END* |
| /schemata/ohradnik/ohradnik.opj |
|---|
| 0,0 → 1,173 |
| (ExpressProject "ohradnik" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\ohradnik.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "TRUE") |
| (DRC_Report_File "D:\KAKLIK\SCHEMATA\OHRADNIK\OHRADNIK.DRC") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "OHRADNIK.ASC") |
| (OTHER_Netlist_File2 "OHRADNIK.CMP") |
| (OTHER_View_Output "TRUE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (EXPORT_Scope "0") |
| (EXPORT_Contents "0") |
| (EXPORT_File_Name "D:\KAKLIK\MLAB\akcelerometr\SCH\ble.EXP")) |
| (Folder "Outputs" |
| (File ".\ohradnik.drc" |
| (Type "Report")) |
| (File ".\ohradnik.asc" |
| (Type "Report")) |
| (File ".\ohradnik2.asc" |
| (Type "Report")) |
| (File "d:\kaklik\mlab\akcelerometr\sch\ble.exp" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\kaklik\ORCAD9x") |
| (PartMRUSelector |
| (HOLE_M5 |
| (FullPartName "HOLE_M5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\PAD.OLB") |
| (DeviceIndex "0")) |
| (RL090 |
| (FullPartName "RL090.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "C:\LIBRARY\ORCAD9X\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (CK050 |
| (FullPartName "CK050.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (BZY |
| (FullPartName "BZY.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_D.OLB") |
| (DeviceIndex "0")) |
| (NE555 |
| (FullPartName "NE555.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (1N4007 |
| (FullPartName "1N4007.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_D.OLB") |
| (DeviceIndex "0")) |
| (FUSE_F1812 |
| (FullPartName "FUSE_F1812.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_REST.OLB") |
| (DeviceIndex "0")) |
| (BZX83 |
| (FullPartName "BZX83.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_D.OLB") |
| (DeviceIndex "0")) |
| (BD135 |
| (FullPartName "BD135.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_T.OLB") |
| (DeviceIndex "0")) |
| (BZX85 |
| (FullPartName "BZX85.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_D.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT-CE020X5 |
| (FullPartName "C-ELYT-CE020X5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (FUSE_F4PIN |
| (FullPartName "FUSE_F4PIN.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_REST.OLB") |
| (DeviceIndex "0")) |
| (BC327 |
| (FullPartName "BC327.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_T.OLB") |
| (DeviceIndex "0")) |
| (C-ELYTC |
| (FullPartName "C-ELYTC.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (R0805 |
| (FullPartName "R0805.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (PIC16F84/SO |
| (FullPartName "PIC16F84/SO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\MICROCHIP\CPU_PIC16_FLASH.OLB") |
| (DeviceIndex "0")) |
| (ARK210/2 |
| (FullPartName "ARK210/2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_CON.OLB") |
| (DeviceIndex "0")) |
| (GLOW_LAMP |
| (FullPartName "GLOW_LAMP.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_REST.OLB") |
| (DeviceIndex "0")) |
| (BC546 |
| (FullPartName "BC546.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_T.OLB") |
| (DeviceIndex "0")) |
| (BC856SMD |
| (FullPartName "BC856SMD.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_T.OLB") |
| (DeviceIndex "0")) |
| ("LAMP NEON" |
| (FullPartName "LAMP NEON.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (D-ZENER |
| (FullPartName "D-ZENER.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (FUSE |
| (FullPartName "FUSE.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_REST.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -30 0 200 0 289")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 66 878 87 524") |
| (Scroll "0 0") |
| (Zoom "84") |
| (Occurrence "/")) |
| (Path "D:\KAKLIK\SCHEMATA\OHRADNIK\OHRADNIK.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/ohradnik/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ostrov/menic/MENIC.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ostrov/menic/MENIC.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ostrov/menic/menic.opj |
|---|
| 0,0 → 1,48 |
| (ExpressProject "menic" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\menic.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (TRAN_ISDN_09 |
| (FullPartName "TRAN_ISDN_09.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| (TRAN_ISDN_12 |
| (FullPartName "TRAN_ISDN_12.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 297")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 44 686 44 368") |
| (Scroll "158 102") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\OSTROV\MENIC\MENIC.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/ostrov/menic/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ostrov/rozvadec/ROZVADEC.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ostrov/rozvadec/ROZVADEC.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/ostrov/rozvadec/rozvadec.opj |
|---|
| 0,0 → 1,53 |
| (ExpressProject "rozvadec" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\rozvadec.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (78XXTO220 |
| (FullPartName "78XXTO220.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\_WORK\POWER.OLB") |
| (DeviceIndex "0")) |
| (FUSE |
| (FullPartName "FUSE.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_REST.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\ostrov\rozvadec\rozvadec.dsn") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\ostrov\rozvadec\rozvadec.dsn" "SCHEMATIC1") |
| (Select "Design Resources" |
| "D:\@Kaklik\schemata\ostrov\rozvadec\rozvadec.dsn" "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 154 800 154 482") |
| (Scroll "0 150") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\OSTROV\ROZVADEC\ROZVADEC.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/ostrov/rozvadec/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/DESIGN1.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/DESIGN2.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/DESIGN3.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/DESIGN4.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/DESIGN4.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/DESIGN4.ONL |
|---|
| 0,0 → 1,252 |
| (PCB DESIGN4 |
| (description |
| (timeStamp "2002 06 18 19 50 32") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Tuesday, June 18, 2002") |
| (document "D:\\@KAKLIK\\SCHEMATA\\DESIGN4.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP2 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP2) |
| (Device JUMP2) |
| (timestamp 00000F35) |
| ("Source Package" JUMP2) |
| (Value JUMP2))) |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP2) |
| (Device JUMP2) |
| (timestamp 00000F4F) |
| ("Source Package" JUMP2) |
| (Value JUMP2)))) |
| (component 1458 |
| (place U1 |
| (property |
| ("PCB Footprint" DIP8_300) |
| (Device DIP8) |
| (timestamp 00000715) |
| ("Source Package" 1458) |
| (Value 1458)))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000085) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000000ED) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000001FE) |
| ("Source Package" R) |
| (Value R))) |
| (place R4 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000195) |
| ("Source Package" R) |
| (Value R))) |
| (place R5 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000001AD) |
| ("Source Package" R) |
| (Value R))) |
| (place R6 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000011D) |
| ("Source Package" R) |
| (Value R))) |
| (place R7 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000165) |
| ("Source Package" R) |
| (Value R))) |
| (place R8 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00000135) |
| ("Source Package" R) |
| (Value R)))) |
| (component C |
| (place C1 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 00000003) |
| ("Source Package" C) |
| (Value C))) |
| (place C2 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 00000037) |
| ("Source Package" C) |
| (Value C))) |
| (place C3 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 0000004F) |
| ("Source Package" C) |
| (Value C))) |
| (place C4 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 000006C1) |
| ("Source Package" C) |
| (Value C))) |
| (place C5 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 00000067) |
| ("Source Package" C) |
| (Value C))) |
| (place C6 |
| (property |
| ("PCB Footprint" CK050) |
| (Device C) |
| (timestamp 0000007F) |
| ("Source Package" C) |
| (Value C))))) |
| (library |
| (image 1458 |
| (property |
| (sourcelib "C:\\PROGRAM FILES\\ORCADLITE\\CAPTURE\\LIBRARY\\OPAMP.OLB")) |
| (pin 999 3 |
| (property |
| (pinname +IN_A) |
| (pintype 0))) |
| (pin 999 2 |
| (property |
| (pinname "-IN_A") |
| (pintype 0))) |
| (pin 999 1 |
| (property |
| (pinname OUT_A) |
| (pintype 2))) |
| (pin 999 8 |
| (property |
| (pinname VCC) |
| (pintype 7))) |
| (pin 999 4 |
| (property |
| (pinname GND) |
| (pintype 7))) |
| (pin 999 5 |
| (property |
| (pinname +IN_B) |
| (pintype 0))) |
| (pin 999 6 |
| (property |
| (pinname "-IN_B") |
| (pintype 0))) |
| (pin 999 7 |
| (property |
| (pinname OUT_B) |
| (pintype 2)))) |
| (image R |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB") |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image C |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB") |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMP2 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP2)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))))) |
| (network |
| (net N00717 |
| (pins |
| C3-1 R1-2 C2-1 R3-2)) |
| (net GND_EARTH |
| (property |
| (nettype S)) |
| (pins |
| U1-4 R5-1 C4-1 J1-2 J2-1)) |
| (net N00560 |
| (pins |
| J2-2 C1-1)) |
| (net N00930 |
| (pins |
| C5-2 R7-2 J1-1 U1-7)) |
| (net N00789 |
| (pins |
| U1-1 C2-2 R2-2 R6-1)) |
| (net N00846 |
| (pins |
| C5-1 C6-1 R8-2 R6-2)) |
| (net N000031 |
| (pins |
| R1-1 C1-2)) |
| (net N00602 |
| (pins |
| R5-2 C4-2 U1-2 R4-2 R3-1 R8-1 U1-6)) |
| (net N00816 |
| (pins |
| R2-1 U1-3 C3-2)) |
| (net N00957 |
| (pins |
| C6-2 U1-5 R7-1)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| U1-8 R4-1))) |
| ) |
| /schemata/picuniversal/PIC-stare/Design1.opj |
|---|
| 0,0 → 1,39 |
| (ExpressProject "Design1" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\design1.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\OrCad91") |
| (PartMRUSelector |
| (BAROMETER_MODULE |
| (FullPartName "BAROMETER_MODULE.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SENSORS.OLB") |
| (DeviceIndex "0")) |
| (DIPSW8 |
| (FullPartName "DIPSW8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" "D:\@Kaklik\schemata\design1.dsn") |
| (Path "Design Resources" "D:\@Kaklik\schemata\design1.dsn" "SCHEMATIC1") |
| (Select "Design Resources" "D:\@Kaklik\schemata\design1.dsn" "SCHEMATIC1" |
| "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC-stare/Design2.opj |
|---|
| 0,0 → 1,22 |
| (ExpressProject "Design2" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\design2.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Select "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC-stare/Design3.opj |
|---|
| 0,0 → 1,22 |
| (ExpressProject "Design3" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\design3.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Select "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC-stare/Design4.opj |
|---|
| 0,0 → 1,72 |
| (ExpressProject "Design4" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\design4.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "D:\KAKL\CW_filter.asc") |
| (OTHER_Netlist_File2 "DESIGN4.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File "d:\kakl\cw_filter.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (GND_EARTH |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (PAD1 |
| (FullPartName "PAD1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (1458 |
| (FullPartName "1458.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\OPAMP.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0"))) |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrcadLite\Capture\Library") |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs") |
| (Select "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.DRC |
|---|
| 0,0 → 1,43 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| WARNING: [DRC0006] Net has fewer than two connections N00591 |
| SCHEMATIC1, PAGE1 (3.50, 3.60) |
| WARNING: [DRC0006] Net has fewer than two connections N00655 |
| SCHEMATIC1, PAGE1 (4.70, 1.90) |
| WARNING: [DRC0006] Net has fewer than two connections N00661 |
| SCHEMATIC1, PAGE1 (4.70, 2.10) |
| WARNING: [DRC0006] Net has fewer than two connections N00673 |
| SCHEMATIC1, PAGE1 (4.70, 2.60) |
| WARNING: [DRC0006] Net has fewer than two connections N00581 |
| SCHEMATIC1, PAGE1 (4.70, 1.50) |
| WARNING: [DRC0006] Net has fewer than two connections N00658 |
| SCHEMATIC1, PAGE1 (4.70, 2.00) |
| WARNING: [DRC0006] Net has fewer than two connections N00670 |
| SCHEMATIC1, PAGE1 (4.70, 2.50) |
| WARNING: [DRC0006] Net has fewer than two connections N00679 |
| SCHEMATIC1, PAGE1 (4.70, 2.80) |
| WARNING: [DRC0006] Net has fewer than two connections N00649 |
| SCHEMATIC1, PAGE1 (4.70, 1.70) |
| WARNING: [DRC0006] Net has fewer than two connections N00652 |
| SCHEMATIC1, PAGE1 (4.70, 1.80) |
| WARNING: [DRC0006] Net has fewer than two connections N00664 |
| SCHEMATIC1, PAGE1 (4.70, 2.30) |
| WARNING: [DRC0006] Net has fewer than two connections N00667 |
| SCHEMATIC1, PAGE1 (4.70, 2.40) |
| WARNING: [DRC0006] Net has fewer than two connections N00676 |
| SCHEMATIC1, PAGE1 (4.70, 2.70) |
| Checking for Invalid References |
| [DRC0011] Reference is invalid for this part JB |
| SCHEMATIC1, PAGE1 (6.00, 2.20) |
| [DRC0011] Reference is invalid for this part JA |
| SCHEMATIC1, PAGE1 (6.20, 1.60) |
| Checking for Duplicate References |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.NET |
|---|
| 0,0 → 1,59 |
| *PADS-PCB* |
| *PART* |
| C1 C@CK025 |
| C2 ELYT@CE020X5 |
| J1 JUMP2X3@JUMP2X3 |
| JA JUMP5@JUMP5 |
| JB JUMP8@JUMP8 |
| R1 R@ |
| R2 R@ |
| R3 R@ |
| U2 SO18@SO18_300 |
| X1 XTAL_C@XTALSMD_C |
| *NET* |
| *SIGNAL* N00193 |
| J1.6 U2.4 R1.1 |
| *SIGNAL* N00581 |
| U2.16 X1.2 |
| *SIGNAL* N00591 |
| U2.15 X1.1 |
| *SIGNAL* VCC |
| R1.2 C2.2 C1.2 J1.5 |
| *SIGNAL* VSS |
| U2.5 |
| *SIGNAL* N00287 |
| U2.12 R2.2 J1.4 |
| *SIGNAL* VDD |
| U2.14 |
| *SIGNAL* N00308 |
| R3.2 U2.13 J1.2 |
| *SIGNAL* GND_POWER |
| X1.3 C2.1 C1.1 J1.3 |
| *SIGNAL* N00670 |
| U2.8 JB.3 |
| *SIGNAL* N00682 |
| JB.7 R2.1 |
| *SIGNAL* N00667 |
| U2.7 JB.2 |
| *SIGNAL* N00673 |
| U2.9 JB.4 |
| *SIGNAL* N00697 |
| R3.1 JB.8 |
| *SIGNAL* N00664 |
| U2.6 JB.1 |
| *SIGNAL* N00679 |
| U2.11 JB.6 |
| *SIGNAL* N00676 |
| U2.10 JB.5 |
| *SIGNAL* N00655 |
| U2.1 JA.3 |
| *SIGNAL* N00649 |
| U2.17 JA.1 |
| *SIGNAL* N00652 |
| U2.18 JA.2 |
| *SIGNAL* N00661 |
| U2.3 JA.5 |
| *SIGNAL* N00658 |
| U2.2 JA.4 |
| *END* |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.ONL |
|---|
| 0,0 → 1,402 |
| (PCB PICUNIVERSAL |
| (description |
| (timeStamp "2002 07 17 08 23 58") |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "") |
| (date "Wednesday, July 17, 2002") |
| (document "C:\\WINNT\\PROFILES\\PEFI\\PLOCHA\\KAKLIK\\PICUNIVERSAL.DSN") |
| (revision "") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component PIC16C84 |
| (place U7 |
| (property |
| ("PCB Footprint" SO18_300) |
| (Device SO18) |
| (timestamp 00000504) |
| ("Source Package" PIC16C84) |
| (Value PIC16C84)))) |
| (component JUMP3 |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP3) |
| (Device JUMP3) |
| (timestamp 00000656) |
| ("Source Package" JUMP3) |
| (Value JUMP3)))) |
| (component JUMP5 |
| (place JA |
| (property |
| ("PCB Footprint" JUMP5) |
| (Device JUMP5) |
| (timestamp 000002ED) |
| ("Source Package" JUMP5) |
| (Value JUMP5)))) |
| (component JUMP6 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP6) |
| (Device JUMP6) |
| (timestamp 000006FB) |
| ("Source Package" JUMP6) |
| (Value JUMP6)))) |
| (component JUMP8 |
| (place JB |
| (property |
| ("PCB Footprint" JUMP8) |
| (Device JUMP8) |
| (timestamp 00000287) |
| ("Source Package" JUMP8) |
| (Value JUMP8)))) |
| (component "XTAL-C" |
| (place X1 |
| (property |
| ("PCB Footprint" XTALSMD_C) |
| (Device XTAL_C) |
| (timestamp 0000008D) |
| ("Source Package" "XTAL-C") |
| (Value "XTAL-C")))) |
| (component "C-ELYT" |
| (place C2 |
| (property |
| ("PCB Footprint" CE020X5) |
| (Device ELYT) |
| (timestamp 00000612) |
| ("Source Package" "C-ELYT") |
| (Value "C-ELYT")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 000000BF) |
| ("Source Package" R) |
| (Value R))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000026C) |
| ("Source Package" R) |
| (Value R))) |
| (place R3 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000026E) |
| ("Source Package" R) |
| (Value R)))) |
| (component C |
| (place C1 |
| (property |
| ("PCB Footprint" CK025) |
| (Device C) |
| (timestamp 000000E7) |
| ("Source Package" C) |
| (Value C))))) |
| (library |
| (image "XTAL-C" |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-REST.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB") |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image PIC16C84 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\PIC.OLB) |
| (Device SO18)) |
| (pin 999 1 |
| (property |
| (pinname RA2) |
| (pintype 1))) |
| (pin 999 2 |
| (property |
| (pinname RA3) |
| (pintype 1))) |
| (pin 999 3 |
| (property |
| (pinname RA4/TOCKI) |
| (pintype 1))) |
| (pin 999 4 |
| (property |
| (pinname M\\C\\L\\R\\) |
| (pintype 0))) |
| (pin 999 6 |
| (property |
| (pinname RB0/INT) |
| (pintype 1))) |
| (pin 999 7 |
| (property |
| (pinname RB1) |
| (pintype 1))) |
| (pin 999 8 |
| (property |
| (pinname RB2) |
| (pintype 1))) |
| (pin 999 9 |
| (property |
| (pinname RB3) |
| (pintype 1))) |
| (pin 999 10 |
| (property |
| (pinname RB4) |
| (pintype 1))) |
| (pin 999 11 |
| (property |
| (pinname RB5) |
| (pintype 1))) |
| (pin 999 12 |
| (property |
| (pinname RB6) |
| (pintype 1))) |
| (pin 999 13 |
| (property |
| (pinname RB7) |
| (pintype 1))) |
| (pin 999 15 |
| (property |
| (pinname OSC1/CLKIN) |
| (pintype 0))) |
| (pin 999 16 |
| (property |
| (pinname OSC2/CLKOUT) |
| (pintype 2))) |
| (pin 999 17 |
| (property |
| (pinname RA0) |
| (pintype 1))) |
| (pin 999 18 |
| (property |
| (pinname RA1) |
| (pintype 1))) |
| (pin 999 5 |
| (property |
| (pinname VSS) |
| (pintype 1))) |
| (pin 999 14 |
| (property |
| (pinname VDD) |
| (pintype 1)))) |
| (image C |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB") |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB") |
| (Device C)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image JUMP6 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP6)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4)))) |
| (image JUMP3 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP3)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image JUMP5 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP5)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4)))) |
| (image JUMP8 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP8)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))))) |
| (network |
| (net VPP |
| (pins |
| U7-4 J1-1 R1-1)) |
| (net CLK |
| (pins |
| J1-6 U7-12 R2-2)) |
| (net DATA |
| (pins |
| J1-5 U7-13 R3-2)) |
| (net N00581 |
| (pins |
| U7-16 X1-2)) |
| (net N00591 |
| (pins |
| X1-1 U7-15)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| R1-2 J1-4 U7-14 C1-2 C2-A J2-1 J2-3)) |
| (net GND_POWER |
| (property |
| (nettype S)) |
| (pins |
| X1-3 U7-5 C1-1 C2-C J2-2 J1-2)) |
| (net N00670 |
| (pins |
| U7-8 JB-3)) |
| (net N00682 |
| (pins |
| R2-1 JB-7)) |
| (net N00667 |
| (pins |
| U7-7 JB-2)) |
| (net N00673 |
| (pins |
| U7-9 JB-4)) |
| (net N00697 |
| (pins |
| R3-1 JB-8)) |
| (net N00664 |
| (pins |
| U7-6 JB-1)) |
| (net N00679 |
| (pins |
| U7-11 JB-6)) |
| (net N00676 |
| (pins |
| U7-10 JB-5)) |
| (net N00655 |
| (pins |
| U7-1 JA-3)) |
| (net N00649 |
| (pins |
| U7-17 JA-1)) |
| (net N00652 |
| (pins |
| U7-18 JA-2)) |
| (net N00661 |
| (pins |
| U7-3 JA-5)) |
| (net N00658 |
| (pins |
| U7-2 JA-4))) |
| ) |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.asc |
|---|
| 0,0 → 1,56 |
| *PADS-PCB* |
| *PART* |
| C1 C@CK025 |
| C2 ELYT@CE020X5 |
| J1 JUMP6@JUMP6 |
| J2 JUMP3@JUMP3 |
| JA JUMP5@JUMP5 |
| JB JUMP8@JUMP8 |
| R1 R@RL090 |
| R2 R@RL090 |
| R3 R@RL090 |
| U7 SO18@SO18_300 |
| X1 XTAL_C@XTALSMD_C |
| *NET* |
| *SIGNAL* VPP |
| U7.4 J1.1 R1.1 |
| *SIGNAL* CLK |
| J1.6 U7.12 R2.2 |
| *SIGNAL* DATA |
| J1.5 U7.13 R3.2 |
| *SIGNAL* N00581 |
| U7.16 X1.2 |
| *SIGNAL* N00591 |
| X1.1 U7.15 |
| *SIGNAL* VCC |
| R1.2 J1.4 U7.14 C1.2 C2.A J2.1 J2.3 |
| *SIGNAL* GND_POWER |
| X1.3 U7.5 C1.1 C2.C J2.2 J1.2 |
| *SIGNAL* N00670 |
| U7.8 JB.3 |
| *SIGNAL* N00682 |
| R2.1 JB.7 |
| *SIGNAL* N00667 |
| U7.7 JB.2 |
| *SIGNAL* N00673 |
| U7.9 JB.4 |
| *SIGNAL* N00697 |
| R3.1 JB.8 |
| *SIGNAL* N00664 |
| U7.6 JB.1 |
| *SIGNAL* N00679 |
| U7.11 JB.6 |
| *SIGNAL* N00676 |
| U7.10 JB.5 |
| *SIGNAL* N00655 |
| U7.1 JA.3 |
| *SIGNAL* N00649 |
| U7.17 JA.1 |
| *SIGNAL* N00652 |
| U7.18 JA.2 |
| *SIGNAL* N00661 |
| U7.3 JA.5 |
| *SIGNAL* N00658 |
| U7.2 JA.4 |
| *END* |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.eco |
|---|
| 0,0 → 1,615 |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 20:29:08 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 20:37:55 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 21:07:40 2002 |
| *PART* |
| 11 HOLE |
| *SET_ATTRIBUTE* PARTTYPE HOLE |
| "Description" otvor pro ruzne prumery sroubu |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *PART* |
| J5 JUMP8 |
| J6 JUMP5 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 21:12:38 2002 |
| *NET* |
| *SIGNAL* N00679 0.3048 |
| J5.6 JB.6 |
| *RENNET* |
| N00679 $$$2 |
| *NET* |
| *SIGNAL* N00664 0.3048 |
| J5.1 JB.1 |
| *RENNET* |
| N00664 $$$3 |
| *NET* |
| *SIGNAL* N00667 0.3048 |
| J5.2 JB.2 |
| *RENNET* |
| N00667 $$$4 |
| *NET* |
| *SIGNAL* N00670 0.3048 |
| J5.3 JB.3 |
| *RENNET* |
| N00670 $$$5 |
| *NET* |
| *SIGNAL* N00673 0.3048 |
| J5.4 JB.4 |
| *RENNET* |
| N00673 $$$6 |
| *NET* |
| *SIGNAL* N00676 0.3048 |
| J5.5 JB.5 |
| *RENNET* |
| N00676 $$$7 |
| *NET* |
| *SIGNAL* N00682 0.3048 |
| J5.7 JB.7 |
| *RENNET* |
| N00682 $$$8 |
| *NET* |
| *SIGNAL* N00697 0.3048 |
| J5.8 JB.8 |
| *RENNET* |
| N00697 $$$9 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 21:25:26 2002 |
| *NET* |
| *SIGNAL* N00661 0.6 |
| J6.5 JA.5 |
| *SIGNAL* N00658 0.6 |
| J6.4 JA.4 |
| *SIGNAL* N00655 0.6 |
| J6.3 JA.3 |
| *SIGNAL* N00652 0.6 |
| J6.2 JA.2 |
| *SIGNAL* N00649 0.6 |
| J6.1 JA.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 21:27:42 2002 |
| *DELPART* |
| 11 HOLE |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 21:28:36 2002 |
| *PART* |
| J7 PRIM34 |
| *SET_ATTRIBUTE* DECAL PRIM34 |
| "Description" primy konektor s 34 piny |
| *PART* |
| J8 PRIM34 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 22:12:06 2002 |
| *DELPART* |
| J7 PRIM34 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Sun Jul 14 22:21:29 2002 |
| *PART* |
| J7 JUMP2X20 |
| *SET_ATTRIBUTE* DECAL JUMP2X20 |
| "Description" dvojrady hrebinek 2x20 pinu |
| *PART* |
| J9 JUMP2X20 |
| J10 JUMP2X20 |
| J11 JUMP2X20 |
| *PART* |
| J12 JUMP2X20 |
| *DELPART* |
| J7 JUMP2X20 |
| *PART* |
| J7 JUMP2X2 |
| *SET_ATTRIBUTE* DECAL JUMP2X2 |
| "Description" dvourady hrebinek 2x2 piny |
| *PART* |
| J13 JUMP2X2 |
| J14 JUMP2X2 |
| J15 JUMP2X2 |
| *DELPART* |
| J14 JUMP2X2 |
| J13 JUMP2X2 |
| J15 JUMP2X2 |
| J7 JUMP2X2 |
| *PART* |
| J7 JUMP20 |
| *SET_ATTRIBUTE* DECAL JUMP20 |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J13 JUMP2X10 |
| *SET_ATTRIBUTE* DECAL JUMP2X10 |
| "Description" dvourady hrebinek 2x10 pinu |
| *PART* |
| J14 JUMP2X5 |
| *SET_ATTRIBUTE* DECAL JUMP2X5 |
| "Description" dvourady hrebinek 2x5 pinu |
| *PART* |
| J15 JUMP2X3 |
| R4 R |
| *SET_ATTRIBUTE* DECAL RL090 |
| "Description" bezny rezistor roztec 8.89mm, 350mils |
| *DELPART* |
| R4 R |
| *PART* |
| 11 HOLE |
| *SET_ATTRIBUTE* PARTTYPE HOLE |
| "Description" otvor pro ruzne prumery sroubu |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *PART* |
| 21 HOLE |
| 31 HOLE |
| J16 JUMP2X10 |
| J17 JUMP2X10 |
| *SET_ATTRIBUTE* DECAL JUMP2X10 |
| "Description" dvourady hrebinek 2x10 pinu |
| *PART* |
| 12 HOLE |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 10:25:18 2002 |
| *DELPIN* |
| J1.2 N00308 |
| J1.3 GND_POWER |
| J1.4 N00287 |
| J1.5 VCC |
| J1.6 N00193 |
| *DELPART* |
| J1 JUMP2X3 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 10:26:21 2002 |
| *DELPIN* |
| R3.1 $$$9 |
| U7.13 N00308 |
| R3.2 N00308 |
| *DELPART* |
| R3 R |
| *DELPIN* |
| C1.1 GND_POWER |
| C1.2 VCC |
| *DELPART* |
| C1 C |
| *DELPIN* |
| C2.A VCC |
| C2.C GND_POWER |
| *DELPART* |
| C2 ELYT |
| *DELPIN* |
| J2.1 VCC |
| J2.2 GND_POWER |
| J2.3 VCC |
| *DELPART* |
| J2 JUMP3 |
| *DELPIN* |
| R1.1 N00193 |
| J4.1 N00193 |
| R1.2 VCC |
| *DELPART* |
| R1 R |
| *DELPIN* |
| R2.1 $$$8 |
| R2.2 N00287 |
| U7.12 N00287 |
| *DELPART* |
| R2 R |
| *DELPIN* |
| U7.1 N00655 |
| U7.2 N00658 |
| U7.3 N00661 |
| J3.1 $$$1 |
| U7.4 $$$1 |
| U7.5 GND_POWER |
| U7.6 $$$3 |
| U7.7 $$$4 |
| U7.8 $$$5 |
| U7.9 $$$6 |
| U7.10 $$$7 |
| U7.11 $$$2 |
| J1.4 VCC |
| U7.14 VCC |
| X1.1 N00591 |
| U7.15 N00591 |
| U7.16 N00581 |
| X1.2 N00581 |
| U7.17 N00649 |
| U7.18 N00652 |
| *DELPART* |
| U7 SO18 |
| *DELPIN* |
| X1.3 GND_POWER |
| J1.2 GND_POWER |
| *DELPART* |
| X1 XTAL_C |
| J3 JUMP1 |
| J4 JUMP1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 10:27:42 2002 |
| *DELPIN* |
| JA.1 N00649 |
| JA.2 N00652 |
| JA.3 N00655 |
| JA.4 N00658 |
| JA.5 N00661 |
| *DELPART* |
| JA JUMP5 |
| *DELPIN* |
| J5.1 $$$3 |
| JB.1 $$$3 |
| J5.2 $$$4 |
| JB.2 $$$4 |
| J5.3 $$$5 |
| JB.3 $$$5 |
| J5.4 $$$6 |
| JB.4 $$$6 |
| J5.5 $$$7 |
| JB.5 $$$7 |
| J5.6 $$$2 |
| JB.6 $$$2 |
| J5.7 $$$8 |
| JB.7 $$$8 |
| J5.8 $$$9 |
| JB.8 $$$9 |
| *DELPART* |
| JB JUMP8 |
| *DELPIN* |
| J6.1 N00649 |
| U7.17 N00649 |
| J6.2 N00652 |
| U7.18 N00652 |
| J6.3 N00655 |
| U7.1 N00655 |
| J6.4 N00658 |
| U7.2 N00658 |
| J6.5 N00661 |
| U7.3 N00661 |
| *DELPART* |
| J6 JUMP5 |
| *DELPIN* |
| J1.1 VPP |
| J1.2 GND_POWER |
| J1.4 VCC |
| J1.5 DATA |
| J1.6 CLK |
| *DELPART* |
| J1 JUMP6 |
| *DELPIN* |
| C1.1 GND_POWER |
| C1.2 VCC |
| *DELPART* |
| C1 C |
| *DELPIN* |
| C2.A VCC |
| C2.C GND_POWER |
| *DELPART* |
| C2 ELYT |
| *DELPIN* |
| J2.1 VCC |
| J2.2 GND_POWER |
| J2.3 VCC |
| *DELPART* |
| J2 JUMP3 |
| *DELPIN* |
| R1.1 VPP |
| U7.4 VPP |
| U7.14 VCC |
| R1.2 VCC |
| *DELPART* |
| R1 R |
| *DELPIN* |
| R2.2 CLK |
| U7.12 CLK |
| *DELPART* |
| R2 R |
| *DELPIN* |
| R3.2 DATA |
| U7.13 DATA |
| *DELPART* |
| R3 R |
| *DELPIN* |
| X1.3 GND_POWER |
| U7.5 GND_POWER |
| X1.1 N00591 |
| U7.15 N00591 |
| U7.16 N00581 |
| X1.2 N00581 |
| *DELPART* |
| U7 SO18 |
| X1 XTAL_C |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 10:41:45 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 10:53:31 2002 |
| *PART* |
| J3 JUMP3 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 12:15:18 2002 |
| *NET* |
| *SIGNAL* N00697 0.6 |
| J5.8 JB.8 |
| *SIGNAL* N00682 0.6 |
| J5.7 JB.7 |
| *SIGNAL* N00679 0.6 |
| J5.6 JB.6 |
| *SIGNAL* N00676 0.6 |
| J5.5 JB.5 |
| *SIGNAL* N00673 0.6 |
| J5.4 JB.4 |
| *SIGNAL* N00670 0.6 |
| J5.3 JB.3 |
| *SIGNAL* N00667 0.6 |
| J5.2 JB.2 |
| *SIGNAL* N00664 0.6 |
| J5.1 JB.1 |
| *PART* |
| J4 JUMP5 |
| *NET* |
| *SIGNAL* N00661 0.6 |
| J4.5 JA.5 |
| *SIGNAL* N00658 0.6 |
| J4.4 JA.4 |
| *SIGNAL* N00655 0.6 |
| J4.3 JA.3 |
| *SIGNAL* N00652 0.6 |
| J4.2 JA.2 |
| *SIGNAL* N00649 0.6 |
| J4.1 JA.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 12:37:04 2002 |
| *PART* |
| J6 JUMP1 |
| *SET_ATTRIBUTE* PARTTYPE JUMP1 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP1 |
| "Description" jednorady hrebinek 1 pin |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 12:44:15 2002 |
| *PART* |
| J18 JUMP1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 12:58:25 2002 |
| *NET* |
| *SIGNAL* GND_POWER 0.6 |
| J3.2 J1.2 |
| J3.2 J2.2 |
| *SIGNAL* VCC 0.6 |
| J2.1 J3.1 |
| J2.3 J3.3 |
| *DELPIN* |
| X1.3 GND_POWER |
| C2.C GND_POWER |
| J2.2 GND_POWER |
| J1.2 GND_POWER |
| J3.2 GND_POWER |
| U7.5 GND_POWER |
| C1.1 GND_POWER |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 13:01:54 2002 |
| *NET* |
| *SIGNAL* $$$1 0.6 |
| J1.2 J3.2 |
| J3.2 J2.2 |
| J2.2 X1.3 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 13:08:25 2002 |
| *NET* |
| *SIGNAL* $$$2 0.6 |
| C1.1 C2.C |
| U7.5 C1.1 |
| *JOINNET* |
| $$$1 $$$2 |
| *RENNET* |
| $$$2 GND |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 13:20:16 2002 |
| *NET* |
| *SIGNAL* VPP 0.6 |
| J18.1 J1.1 |
| J6.1 U7.4 |
| *SPLITNET* |
| *SIGNAL* VPP |
| J6.1 U7.4 R1.1 |
| *SIGNAL* $$$1 |
| J18.1 J1.1 |
| *PART* |
| J19 JUMP1 |
| J20 JUMP1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 13:22:16 2002 |
| *NET* |
| *SIGNAL* GND 0.6 |
| J20.1 C2.C |
| J19.1 X1.3 |
| *SPLITNET* |
| *SIGNAL* GND |
| J19.1 X1.3 J1.2 J3.2 J2.2 |
| *SIGNAL* $$$2 |
| U7.5 C1.1 C2.C J20.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 13:29:34 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- PICUNIVERSAL.pcb -- Wed Jul 17 13:48:45 2002 |
| *JOINNET* |
| $$$2 GND |
| *JOINNET* |
| $$$1 VPP |
| *END* |
| /schemata/picuniversal/PIC-stare/PICUNIVERSAL.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC-stare/PICuniversal.opj |
|---|
| 0,0 → 1,113 |
| (ExpressProject "PICuniversal" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\picuniversal.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "C:\WINNT\Profiles\pefi\Plocha\kaklik\PICUNIVERSAL.asc") |
| (OTHER_Netlist_File2 "D:\@KAKLIK\SCHEMATA\PICUNIVERSAL.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "PADSPCB.DLL") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE") |
| (DRC_Scope "0") |
| (DRC_Action "0") |
| (DRC_Create_Warnings "FALSE") |
| (DRC_Check_Ports "FALSE") |
| (DRC_Check_Off-Page_Connectors "FALSE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "FALSE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File "D:\@KAKLIK\SCHEMATA\PICUNIVERSAL.DRC")) |
| (Folder "Outputs" |
| (File ".\picuniversal.asc" |
| (Type "Report")) |
| (File ".\picuniversal.drc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (LastUsedLibraryBrowseDirectory "C:\library\OrCad91") |
| (PartMRUSelector |
| (JUMP6 |
| (FullPartName "JUMP6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (JUMP3 |
| (FullPartName "JUMP3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (PIC16C84 |
| (FullPartName "PIC16C84.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\PIC.OLB") |
| (DeviceIndex "0")) |
| (JUMP5 |
| (FullPartName "JUMP5.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (TP |
| (FullPartName "TP.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP2X3 |
| (FullPartName "JUMP2X3.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (XTAL-C |
| (FullPartName "XTAL-C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-REST.OLB") |
| (DeviceIndex "0")) |
| (PIC16F84 |
| (FullPartName "PIC16F84.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\MICROCONTROLLER.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\picuniversal\picuniversal.dsn") |
| (Path "Design Resources" |
| "D:\@Kaklik\schemata\picuniversal\picuniversal.dsn" "SCHEMATIC1") |
| (Path "Outputs") |
| (Select "Design Resources" |
| "D:\@Kaklik\schemata\picuniversal\picuniversal.dsn" "SCHEMATIC1" |
| "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC-stare/Session.log |
|---|
| --- picuniversal/PIC-stare/ao_attr.err (nonexistent) |
| +++ picuniversal/PIC-stare/ao_attr.err (revision 6) |
| @@ -0,0 +1,14 @@ |
| +Assembly Option Service has detected inproper attribute values |
| + |
| +Sun Jul 14 16:58:19 2002 |
| + |
| +Current Job : PICUNIVERSAL.pcb |
| + |
| + |
| +Format: |
| +OBJ_NAME |
| +OLD_VALUE{EMPTY;TOO_LONG} |
| +NEW_VALUE{DELETED;TOO_LONG} |
| +RESUME |
| + |
| + |
| /schemata/picuniversal/PIC-stare/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/PIC783.asc |
|---|
| 0,0 → 1,69 |
| *PADS-PCB* |
| *PART* |
| C1 ELYT@CE020X5 |
| C2 C@CK025 |
| J1 JUMP6@JUMP6 |
| J6 JUMP8@JUMP8 |
| J7 JUMP8@JUMP8 |
| J8 JUMP6@JUMP6 |
| R1 R@RL090 |
| R2 R@RL090 |
| U1 PIC16f873/876@SO28_300 |
| X1 XTAL_C@XTALSMD_C |
| *NET* |
| *SIGNAL* +3V |
| C2.2 R2.2 U1.20 C1.A J1.4 |
| *SIGNAL* DATAPROG |
| J6.8 U1.28 J1.5 |
| *SIGNAL* CLKPROG |
| J6.7 U1.27 J1.6 |
| *SIGNAL* VPP |
| R2.1 U1.1 J1.1 |
| *SIGNAL* N14668 |
| J7.1 U1.11 |
| *SIGNAL* N14671 |
| J7.2 U1.12 |
| *SIGNAL* N14674 |
| J7.3 U1.13 |
| *SIGNAL* N14677 |
| J7.4 U1.14 |
| *SIGNAL* N14680 |
| J7.5 U1.15 |
| *SIGNAL* N14683 |
| J7.6 U1.16 |
| *SIGNAL* N14686 |
| J7.7 U1.17 |
| *SIGNAL* N14689 |
| J7.8 U1.18 |
| *SIGNAL* N14692 |
| J6.1 U1.21 |
| *SIGNAL* N14698 |
| J6.2 U1.22 |
| *SIGNAL* N14704 |
| J6.3 U1.23 |
| *SIGNAL* N14710 |
| J6.4 U1.24 R1.2 |
| *SIGNAL* N14716 |
| J6.5 U1.25 |
| *SIGNAL* N14722 |
| J6.6 U1.26 |
| *SIGNAL* N14746 |
| U1.2 J8.1 |
| *SIGNAL* N14749 |
| U1.3 J8.2 |
| *SIGNAL* N14752 |
| U1.4 J8.3 |
| *SIGNAL* N14755 |
| U1.5 J8.4 |
| *SIGNAL* N14758 |
| U1.6 J8.5 |
| *SIGNAL* N14761 |
| U1.7 J8.6 |
| *SIGNAL* GND |
| X1.3 U1.8 U1.19 C2.1 C1.C J1.2 R1.1 |
| *SIGNAL* N11758 |
| U1.10 X1.2 |
| *SIGNAL* N00331 |
| U1.9 X1.1 |
| *END* |
| /schemata/picuniversal/PIC783/PIC783.eco |
|---|
| 0,0 → 1,569 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:33:44 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:34:25 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:52:03 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:55:07 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:56:45 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 20:00:12 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Sat Dec 07 09:42:35 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 10:07:47 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 10:10:46 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:17:01 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:20:13 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:28:19 2002 |
| *PART* |
| J2 JUMP8 |
| J3 JUMP8 |
| J4 JUMP6 |
| *NET* |
| *SIGNAL* N14746 0.5 |
| J4.1 J8.1 |
| *SIGNAL* N14749 0.5 |
| J4.2 J8.2 |
| *SIGNAL* N14752 0.5 |
| J4.3 J8.3 |
| *SIGNAL* N14755 0.5 |
| J4.4 J8.4 |
| *SIGNAL* N14758 0.5 |
| J4.5 J8.5 |
| *SIGNAL* N14761 0.5 |
| J4.6 J8.6 |
| *SIGNAL* N14668 0.5 |
| J7.1 J3.1 |
| *SIGNAL* N14671 0.5 |
| J7.2 J3.2 |
| *SIGNAL* N14674 0.5 |
| J7.3 J3.3 |
| *SIGNAL* N14677 0.5 |
| J7.4 J3.4 |
| *SIGNAL* N14680 0.5 |
| J7.5 J3.5 |
| *SIGNAL* N14683 0.5 |
| J7.6 J3.6 |
| *SIGNAL* N14686 0.5 |
| J7.7 J3.7 |
| *SIGNAL* N14689 0.5 |
| J7.8 J3.8 |
| *SIGNAL* N14692 0.5 |
| J6.1 J2.1 |
| *SIGNAL* N14698 0.5 |
| J6.2 J2.2 |
| *SIGNAL* N14704 0.5 |
| J6.3 J2.3 |
| J2.3 J2.4 |
| *SIGNAL* N14716 0.5 |
| J6.5 J2.5 |
| *SIGNAL* N14722 0.5 |
| J6.6 J2.6 |
| *SIGNAL* CLKPROG 0.5 |
| J6.7 J2.7 |
| *SIGNAL* DATAPROG 0.5 |
| J6.8 J2.8 |
| *DELPIN* |
| J2.4 N14704 |
| *NET* |
| *SIGNAL* N14710 0.5 |
| J6.4 J2.4 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:44:59 2002 |
| *PART* |
| J5 JUMP2X20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X20 |
| "Description" dvojrady hrebinek 2x20 pinu |
| *PART* |
| J9 JUMP2X20 |
| J10 JUMP2X20 |
| J11 JUMP2X20 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:50:23 2002 |
| *PART* |
| J12 JUMP2X20 |
| J13 JUMP20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP20 |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J14 JUMP2X20 |
| J15 JUMP2X20 |
| *DELPART* |
| J5 JUMP2X20 |
| *NET* |
| *SIGNAL* GND 0.6 |
| J1.2 J9.1 |
| *SIGNAL* +3V 0.7 |
| J1.4 J9.2 |
| *SIGNAL* GND 0.6 |
| J9.1 J10.40 |
| *SIGNAL* +3V 0.7 |
| J9.2 J10.38 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:55:51 2002 |
| *NET* |
| *SIGNAL* +3V 0.7 |
| J1.4 J10.6 |
| J10.6 J10.4 |
| J10.4 J10.2 |
| J10.2 J10.1 |
| J10.1 J9.2 |
| *SIGNAL* GND 0.6 |
| J1.2 J10.10 |
| J10.10 J9.10 |
| J9.10 J9.9 |
| J9.9 J9.7 |
| J9.7 J9.5 |
| J9.5 J9.3 |
| J9.3 J9.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:01:34 2002 |
| *DELPIN* |
| J10.38 +3V |
| J9.2 +3V |
| J10.1 +3V |
| J10.2 +3V |
| J10.4 +3V |
| J10.6 +3V |
| J9.1 GND |
| J9.3 GND |
| J9.5 GND |
| J9.7 GND |
| J9.9 GND |
| J9.10 GND |
| J10.40 GND |
| J10.10 GND |
| *PART* |
| J5 JUMP2X20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X20 |
| "Description" dvojrady hrebinek 2x20 pinu |
| *PART* |
| J16 JUMP20 |
| DVVDV1 HOLE |
| *SET_ATTRIBUTE* PARTTYPE HOLE |
| "Description" otvor pro ruzne prumery sroubu |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *PART* |
| DVVDV2 HOLE |
| DVVDV3 HOLE |
| DVVDV4 HOLE |
| DVVDV5 HOLE |
| *DELPART* |
| DVVDV1 HOLE |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:14:56 2002 |
| *PART* |
| DVVDV1 HOLE |
| DVVDV6 HOLE |
| DVVDV7 HOLE |
| *PART* |
| J17 JUMP2X9 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X9 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X9 |
| "Description" dvourady hrebinek 2x9 pinu |
| *PART* |
| J18 JUMP2X6 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X6 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X6 |
| "Description" dvourady hrebinek 2x6 pinu |
| *PART* |
| J19 JUMP2X6 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:28:06 2002 |
| *PART* |
| T1 TP |
| *SET_ATTRIBUTE* PARTTYPE TP |
| "Description" testovaci body |
| *SET_ATTRIBUTE* DECAL TP |
| "Description" testovaci bod s dirou |
| *PART* |
| T2 TP |
| T3 TP |
| T4 TP |
| T5 TP |
| T6 TP |
| T7 TP |
| T8 TP |
| *DELPART* |
| T2 TP |
| T8 TP |
| T7 TP |
| T6 TP |
| *PART* |
| T2 TP |
| T6 TP |
| T7 TP |
| T8 TP |
| T9 TP |
| T10 TP |
| T11 TP |
| T12 TP |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:34:43 2002 |
| *NET* |
| *SIGNAL* $$$1 0.5 |
| J9.1 T1.1 |
| T1.1 T12.1 |
| T12.1 T8.1 |
| T8.1 J10.40 |
| *SIGNAL* $$$2 0.5 |
| J10.38 T7.1 |
| T7.1 T11.1 |
| T11.1 T3.1 |
| T3.1 J9.2 |
| *SIGNAL* $$$3 0.5 |
| J10.1 T4.1 |
| T4.1 T10.1 |
| T10.1 T6.1 |
| T6.1 J10.36 |
| *SIGNAL* $$$4 0.5 |
| J10.34 T2.1 |
| T2.1 T9.1 |
| T9.1 T5.1 |
| T5.1 J10.2 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:48:24 2002 |
| *NET* |
| *SIGNAL* $$$1 2 |
| T1.1 T12.1 |
| *SIGNAL* $$$2 2 |
| T11.1 T3.1 |
| *SIGNAL* $$$3 2 |
| T4.1 T10.1 |
| *SIGNAL* $$$4 2 |
| T9.1 T5.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:57:02 2002 |
| *DELPIN* |
| T2.1 $$$4 |
| *SPLITNET* |
| *SIGNAL* $$$2 |
| J9.2 T3.1 J10.38 |
| *SIGNAL* $$$5 |
| T7.1 T11.1 |
| *DELPIN* |
| T3.1 $$$2 |
| T5.1 $$$4 |
| T7.1 $$$5 |
| T11.1 $$$5 |
| T9.1 $$$4 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:03:44 2002 |
| *PART* |
| HFGH1 HOLE |
| *SET_ATTRIBUTE* PARTTYPE HOLE |
| "Description" otvor pro ruzne prumery sroubu |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *PART* |
| HFGH2 HOLE |
| HFGH3 HOLE |
| HFGH4 HOLE |
| HFGH5 HOLE |
| HFGH6 HOLE |
| HFGH7 HOLE |
| HFGH8 HOLE |
| HFGH9 HOLE |
| HFGH10 HOLE |
| HFGH11 HOLE |
| HFGH12 HOLE |
| J5 JUMP2X7 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X7 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X7 |
| "Description" dvourady hrebinek 2x7 pinu |
| *DELPART* |
| J5 JUMP2X7 |
| *PART* |
| J5 JUMP2X6 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X6 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X6 |
| "Description" dvourady hrebinek 2x6 pinu |
| *PART* |
| J16 JUMP2X6 |
| HFGH13 PAD |
| *SET_ATTRIBUTE* PARTTYPE PAD |
| "Value" ??? |
| "Description" plne plosky ruznych prumeru |
| *SET_ATTRIBUTE* DECAL PAD3 |
| "Description" ploska s prumerem 3 mm |
| *PART* |
| HFGH14 PAD |
| HFGH15 PAD |
| HFGH16 PAD |
| HFGH17 PAD |
| HFGH18 PAD |
| *NET* |
| *SIGNAL* $$$1 0.5 |
| J9.1 HFGH17.1 |
| HFGH17.1 HFGH16.1 |
| HFGH16.1 HFGH13.1 |
| HFGH13.1 J10.40 |
| *SIGNAL* $$$2 0.5 |
| J10.38 HFGH14.1 |
| HFGH14.1 HFGH15.1 |
| HFGH15.1 HFGH18.1 |
| HFGH18.1 J10.1 |
| J10.38 HFGH14.1 |
| *SIGNAL* $$$1 0.5 |
| HFGH16.1 HFGH17.1 |
| *DELPIN* |
| *NET* |
| *SIGNAL* $$$2 0.5 |
| HFGH14.1 J10.36 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:17:15 2002 |
| *SPLITNET* |
| *SIGNAL* $$$2 |
| HFGH15.1 HFGH18.1 HFGH14.1 |
| *SIGNAL* $$$3 |
| J10.36 J10.38 J10.1 |
| *SPLITNET* |
| *SIGNAL* $$$1 |
| HFGH16.1 HFGH17.1 HFGH13.1 |
| *SIGNAL* $$$4 |
| J10.40 J9.1 |
| *DELPIN* |
| J10.1 $$$3 |
| J9.1 $$$4 |
| J10.40 $$$4 |
| *PART* |
| HFGH19 PAD |
| HFGH20 PAD |
| HFGH21 PAD |
| HFGH22 PAD |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:18:50 2002 |
| *NET* |
| *SIGNAL* $$$2 3 |
| HFGH21.1 HFGH14.1 |
| *SIGNAL* $$$1 3 |
| HFGH13.1 HFGH22.1 |
| *SIGNAL* $$$2 3 |
| HFGH20.1 HFGH18.1 |
| *SIGNAL* $$$1 3 |
| HFGH17.1 HFGH19.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:20:06 2002 |
| *PART* |
| T1 TP |
| *SET_ATTRIBUTE* PARTTYPE TP |
| "Description" testovaci body |
| *SET_ATTRIBUTE* DECAL TP |
| "Description" testovaci bod s dirou |
| *PART* |
| T2 TP |
| T3 TP |
| T4 TP |
| T5 TP |
| *NET* |
| *SIGNAL* $$$4 0.5 |
| T5.1 T4.1 |
| T4.1 T3.1 |
| T3.1 T2.1 |
| T2.1 T1.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:23:02 2002 |
| *NET* |
| *SIGNAL* $$$4 2 |
| T2.1 T3.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:24:53 2002 |
| *PART* |
| J17 JUMP2X20 |
| J18 JUMP2X20 |
| J19 JUMP2X6 |
| J20 JUMP2X6 |
| J21 JUMP2X6 |
| J22 JUMP2X6 |
| J23 JUMP2X5 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X5 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X5 |
| "Description" dvourady hrebinek 2x5 pinu |
| *PART* |
| J24 JUMP2X8 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X8 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X8 |
| "Description" dvourady hrebinek 2x8 pinu |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:34:34 2002 |
| *END* |
| /schemata/picuniversal/PIC783/PIC783.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/Session.log |
|---|
| --- picuniversal/PIC783/ao_attr.err (nonexistent) |
| +++ picuniversal/PIC783/ao_attr.err (revision 6) |
| @@ -0,0 +1,14 @@ |
| +Assembly Option Service has detected inproper attribute values |
| + |
| +Sat Dec 07 10:17:12 2002 |
| + |
| +Current Job : Untitled |
| + |
| + |
| +Format: |
| +OBJ_NAME |
| +OLD_VALUE{EMPTY;TOO_LONG} |
| +NEW_VALUE{DELETED;TOO_LONG} |
| +RESUME |
| + |
| + |
| /schemata/picuniversal/PIC783/f1.opj |
|---|
| 0,0 → 1,55 |
| (ExpressProject "" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (File ".\pic783.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (NoModify) |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "PIC783.asc") |
| (OTHER_Netlist_File2 "PIC783.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File ".\pic783.net" |
| (Type "Report")) |
| (File ".\pic783.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP6 |
| (FullPartName "JUMP6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\PIC783\pic783.dsn")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC783/hispeed.lst |
|---|
| 0,0 → 1,2 |
| ELECTRODYNAMIC CHECKING REPORT -- Untitled -- Sat Dec 07 16:23:41 2002 |
| /schemata/picuniversal/PIC783/pic783.dbk |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/pic783.dsn |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/pic783.onl |
|---|
| 0,0 → 1,411 |
| (PCB PIC783 |
| (description |
| (timeStamp "2003 03 22 14 11 08") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "PIC_universal") |
| (date "Friday, December 06, 2002") |
| (document "D:\\@KAKLIK\\SCHEMATA\\PIC783\\PIC783.DSN") |
| (revision "1.0") |
| (organization "") |
| (address1 "Decros s.r.o") |
| (address2 "J.S.Baara 40") |
| (address3 "370 01 Ceske Budejovice") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP6 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP6) |
| (Device JUMP6) |
| (timestamp 000006FB) |
| ("Source Package" JUMP6) |
| (Value JUMP6))) |
| (place J8 |
| (property |
| ("PCB Footprint" JUMP6) |
| (Device JUMP6) |
| (timestamp 00003998) |
| ("Source Package" JUMP6) |
| (Value JUMP6)))) |
| (component JUMP8 |
| (place J6 |
| (property |
| ("PCB Footprint" JUMP8) |
| (Device JUMP8) |
| (timestamp 00003948) |
| ("Source Package" JUMP8) |
| (Value JUMP8))) |
| (place J7 |
| (property |
| ("PCB Footprint" JUMP8) |
| (Device JUMP8) |
| (timestamp 0000394A) |
| ("Source Package" JUMP8) |
| (Value JUMP8)))) |
| (component PIC16F873/876 |
| (place U1 |
| (property |
| ("PCB Footprint" SO28_300) |
| (Device PIC16f873/876) |
| (timestamp 00000009) |
| ("Source Package" PIC16F873/876) |
| (Value PIC16F873/876)))) |
| (component "XTAL-C" |
| (place X1 |
| (property |
| ("PCB Footprint" XTALSMD_C) |
| (Device XTAL_C) |
| (timestamp 00000014) |
| ("Source Package" "XTAL-C") |
| (Value 4MHz)))) |
| (component "C-ELYT" |
| (place C1 |
| (property |
| ("PCB Footprint" CE020X5) |
| (Device ELYT) |
| (timestamp 00003B92) |
| ("Source Package" "C-ELYT") |
| (Value "C-ELYT")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00003AD7) |
| ("Source Package" R) |
| (Value 10K))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000001C) |
| ("Source Package" R) |
| (Value 10K)))) |
| (component C |
| (place C2 |
| (property |
| ("PCB Footprint" CK025) |
| (Device C) |
| (timestamp 00000030) |
| ("Source Package" C) |
| (Value 10nF))))) |
| (library |
| (image "XTAL-C" |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-REST.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image PIC16F873/876 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\MPC.OLB) |
| (Device PIC16f873/876)) |
| (pin 999 2 |
| (property |
| (pinname RA0/AN0) |
| (pintype 1))) |
| (pin 999 3 |
| (property |
| (pinname RA1/AN1) |
| (pintype 1))) |
| (pin 999 4 |
| (property |
| (pinname RA2/AN2) |
| (pintype 1))) |
| (pin 999 5 |
| (property |
| (pinname RA3/AN3) |
| (pintype 1))) |
| (pin 999 6 |
| (property |
| (pinname RA4/TOCKI) |
| (pintype 1))) |
| (pin 999 7 |
| (property |
| (pinname RA5/AN4/SS#) |
| (pintype 1))) |
| (pin 999 11 |
| (property |
| (pinname RC0/T1OSO/T1CKI) |
| (pintype 1))) |
| (pin 999 12 |
| (property |
| (pinname RC1/T1OSI/CCP2) |
| (pintype 1))) |
| (pin 999 13 |
| (property |
| (pinname RC2/CCP1) |
| (pintype 1))) |
| (pin 999 14 |
| (property |
| (pinname RC3/SCK/SCL) |
| (pintype 1))) |
| (pin 999 15 |
| (property |
| (pinname RC4/SDI/SDA) |
| (pintype 1))) |
| (pin 999 16 |
| (property |
| (pinname RC5/SDO) |
| (pintype 1))) |
| (pin 999 17 |
| (property |
| (pinname RC6/TX/CK) |
| (pintype 1))) |
| (pin 999 18 |
| (property |
| (pinname RC7/RX/DT) |
| (pintype 1))) |
| (pin 999 21 |
| (property |
| (pinname RB0/INT) |
| (pintype 1))) |
| (pin 999 22 |
| (property |
| (pinname RB1) |
| (pintype 1))) |
| (pin 999 23 |
| (property |
| (pinname RB2) |
| (pintype 1))) |
| (pin 999 24 |
| (property |
| (pinname RB3/PGM) |
| (pintype 1))) |
| (pin 999 25 |
| (property |
| (pinname RB4) |
| (pintype 1))) |
| (pin 999 26 |
| (property |
| (pinname RB5) |
| (pintype 1))) |
| (pin 999 27 |
| (property |
| (pinname RB6/PGC) |
| (pintype 1))) |
| (pin 999 28 |
| (property |
| (pinname RB7/PGD) |
| (pintype 1))) |
| (pin 999 1 |
| (property |
| (pinname MCLR#/VPP/THV) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname VSS) |
| (pintype 7))) |
| (pin 999 19 |
| (property |
| (pinname VSS) |
| (pintype 7))) |
| (pin 999 20 |
| (property |
| (pinname VDD) |
| (pintype 7))) |
| (pin 999 9 |
| (property |
| (pinname OSC1/CLKIN) |
| (pintype 0))) |
| (pin 999 10 |
| (property |
| (pinname OSC2/CLKOUT) |
| (pintype 2)))) |
| (image R |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB")) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4)))) |
| (image C |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMP6 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP6)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4)))) |
| (image JUMP8 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP8)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))))) |
| (network |
| (net +3V |
| (property |
| (nettype S)) |
| (pins |
| C2-2 R2-2 U1-20 C1-A J1-4)) |
| (net DATAPROG |
| (pins |
| J6-8 U1-28 J1-5)) |
| (net CLKPROG |
| (pins |
| J6-7 U1-27 J1-6)) |
| (net VPP |
| (pins |
| R2-1 U1-1 J1-1)) |
| (net N14668 |
| (pins |
| J7-1 U1-11)) |
| (net N14671 |
| (pins |
| J7-2 U1-12)) |
| (net N14674 |
| (pins |
| J7-3 U1-13)) |
| (net N14677 |
| (pins |
| J7-4 U1-14)) |
| (net N14680 |
| (pins |
| J7-5 U1-15)) |
| (net N14683 |
| (pins |
| J7-6 U1-16)) |
| (net N14686 |
| (pins |
| J7-7 U1-17)) |
| (net N14689 |
| (pins |
| J7-8 U1-18)) |
| (net N14692 |
| (pins |
| J6-1 U1-21)) |
| (net N14698 |
| (pins |
| J6-2 U1-22)) |
| (net N14704 |
| (pins |
| J6-3 U1-23)) |
| (net N14710 |
| (pins |
| J6-4 U1-24 R1-2)) |
| (net N14716 |
| (pins |
| J6-5 U1-25)) |
| (net N14722 |
| (pins |
| J6-6 U1-26)) |
| (net N14746 |
| (pins |
| U1-2 J8-1)) |
| (net N14749 |
| (pins |
| U1-3 J8-2)) |
| (net N14752 |
| (pins |
| U1-4 J8-3)) |
| (net N14755 |
| (pins |
| U1-5 J8-4)) |
| (net N14758 |
| (pins |
| U1-6 J8-5)) |
| (net N14761 |
| (pins |
| U1-7 J8-6)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| X1-3 U1-8 U1-19 C2-1 C1-C J1-2 R1-1)) |
| (net N11758 |
| (pins |
| U1-10 X1-2)) |
| (net N00331 |
| (pins |
| U1-9 X1-1))) |
| ) |
| /schemata/picuniversal/PIC783/pic783.opj |
|---|
| 0,0 → 1,40 |
| (ExpressProject "" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (File ".\sbxv20.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (NoModify) |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "D:\@Kaklik\schemata\PIC783\SBXV20.asc") |
| (OTHER_Netlist_File2 "SBXV20.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File ".\sbxv20.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Select "Design Resources" "Library")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 160 676 -4 -23 0 557 0 473")) |
| (Tab 0)))) |
| /schemata/picuniversal/PIC783/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/zaloha/PIC783.asc |
|---|
| 0,0 → 1,69 |
| *PADS-PCB* |
| *PART* |
| C1 ELYT@CE020X5 |
| C2 C@CK025 |
| J1 JUMP6@JUMP6 |
| J6 JUMP8@JUMP8 |
| J7 JUMP8@JUMP8 |
| J8 JUMP6@JUMP6 |
| R1 R@RL090 |
| R2 R@RL090 |
| U1 PIC16f873/876@SO28_300 |
| X1 XTAL_C@XTALSMD_C |
| *NET* |
| *SIGNAL* +3V |
| J1.4 C1.A R2.2 C2.2 U1.20 |
| *SIGNAL* DATAPROG |
| J6.8 U1.28 J1.5 |
| *SIGNAL* CLKPROG |
| J6.7 U1.27 J1.6 |
| *SIGNAL* VPP |
| R2.1 U1.1 J1.1 |
| *SIGNAL* N14668 |
| J7.1 U1.11 |
| *SIGNAL* N14671 |
| J7.2 U1.12 |
| *SIGNAL* N14674 |
| J7.3 U1.13 |
| *SIGNAL* N14677 |
| J7.4 U1.14 |
| *SIGNAL* N14680 |
| J7.5 U1.15 |
| *SIGNAL* N14683 |
| J7.6 U1.16 |
| *SIGNAL* N14686 |
| J7.7 U1.17 |
| *SIGNAL* N14689 |
| J7.8 U1.18 |
| *SIGNAL* N14692 |
| J6.1 U1.21 |
| *SIGNAL* N14698 |
| J6.2 U1.22 |
| *SIGNAL* N14704 |
| J6.3 U1.23 |
| *SIGNAL* N14710 |
| J6.4 U1.24 R1.2 |
| *SIGNAL* N14716 |
| J6.5 U1.25 |
| *SIGNAL* N14722 |
| J6.6 U1.26 |
| *SIGNAL* N14746 |
| U1.2 J8.1 |
| *SIGNAL* N14749 |
| U1.3 J8.2 |
| *SIGNAL* N14752 |
| U1.4 J8.3 |
| *SIGNAL* N14755 |
| U1.5 J8.4 |
| *SIGNAL* N14758 |
| U1.6 J8.5 |
| *SIGNAL* N14761 |
| U1.7 J8.6 |
| *SIGNAL* GND |
| X1.3 C1.C J1.2 U1.8 U1.19 R1.1 C2.1 |
| *SIGNAL* N11758 |
| U1.10 X1.2 |
| *SIGNAL* N00331 |
| U1.9 X1.1 |
| *END* |
| /schemata/picuniversal/PIC783/zaloha/PIC783.eco |
|---|
| 0,0 → 1,569 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:33:44 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:34:25 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:52:03 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:55:07 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 19:56:45 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Fri Dec 06 20:00:12 2002 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Sat Dec 07 09:42:35 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 10:07:47 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 10:10:46 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:17:01 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:20:13 2002 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:28:19 2002 |
| *PART* |
| J2 JUMP8 |
| J3 JUMP8 |
| J4 JUMP6 |
| *NET* |
| *SIGNAL* N14746 0.5 |
| J4.1 J8.1 |
| *SIGNAL* N14749 0.5 |
| J4.2 J8.2 |
| *SIGNAL* N14752 0.5 |
| J4.3 J8.3 |
| *SIGNAL* N14755 0.5 |
| J4.4 J8.4 |
| *SIGNAL* N14758 0.5 |
| J4.5 J8.5 |
| *SIGNAL* N14761 0.5 |
| J4.6 J8.6 |
| *SIGNAL* N14668 0.5 |
| J7.1 J3.1 |
| *SIGNAL* N14671 0.5 |
| J7.2 J3.2 |
| *SIGNAL* N14674 0.5 |
| J7.3 J3.3 |
| *SIGNAL* N14677 0.5 |
| J7.4 J3.4 |
| *SIGNAL* N14680 0.5 |
| J7.5 J3.5 |
| *SIGNAL* N14683 0.5 |
| J7.6 J3.6 |
| *SIGNAL* N14686 0.5 |
| J7.7 J3.7 |
| *SIGNAL* N14689 0.5 |
| J7.8 J3.8 |
| *SIGNAL* N14692 0.5 |
| J6.1 J2.1 |
| *SIGNAL* N14698 0.5 |
| J6.2 J2.2 |
| *SIGNAL* N14704 0.5 |
| J6.3 J2.3 |
| J2.3 J2.4 |
| *SIGNAL* N14716 0.5 |
| J6.5 J2.5 |
| *SIGNAL* N14722 0.5 |
| J6.6 J2.6 |
| *SIGNAL* CLKPROG 0.5 |
| J6.7 J2.7 |
| *SIGNAL* DATAPROG 0.5 |
| J6.8 J2.8 |
| *DELPIN* |
| J2.4 N14704 |
| *NET* |
| *SIGNAL* N14710 0.5 |
| J6.4 J2.4 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:44:59 2002 |
| *PART* |
| J5 JUMP2X20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X20 |
| "Description" dvojrady hrebinek 2x20 pinu |
| *PART* |
| J9 JUMP2X20 |
| J10 JUMP2X20 |
| J11 JUMP2X20 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:50:23 2002 |
| *PART* |
| J12 JUMP2X20 |
| J13 JUMP20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP20 |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J14 JUMP2X20 |
| J15 JUMP2X20 |
| *DELPART* |
| J5 JUMP2X20 |
| *NET* |
| *SIGNAL* GND 0.6 |
| J1.2 J9.1 |
| *SIGNAL* +3V 0.7 |
| J1.4 J9.2 |
| *SIGNAL* GND 0.6 |
| J9.1 J10.40 |
| *SIGNAL* +3V 0.7 |
| J9.2 J10.38 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 16:55:51 2002 |
| *NET* |
| *SIGNAL* +3V 0.7 |
| J1.4 J10.6 |
| J10.6 J10.4 |
| J10.4 J10.2 |
| J10.2 J10.1 |
| J10.1 J9.2 |
| *SIGNAL* GND 0.6 |
| J1.2 J10.10 |
| J10.10 J9.10 |
| J9.10 J9.9 |
| J9.9 J9.7 |
| J9.7 J9.5 |
| J9.5 J9.3 |
| J9.3 J9.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:01:34 2002 |
| *DELPIN* |
| J10.38 +3V |
| J9.2 +3V |
| J10.1 +3V |
| J10.2 +3V |
| J10.4 +3V |
| J10.6 +3V |
| J9.1 GND |
| J9.3 GND |
| J9.5 GND |
| J9.7 GND |
| J9.9 GND |
| J9.10 GND |
| J10.40 GND |
| J10.10 GND |
| *PART* |
| J5 JUMP2X20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X20 |
| "Description" dvojrady hrebinek 2x20 pinu |
| *PART* |
| J16 JUMP20 |
| DVVDV1 HOLE |
| *SET_ATTRIBUTE* PARTTYPE HOLE |
| "Description" otvor pro ruzne prumery sroubu |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *PART* |
| DVVDV2 HOLE |
| DVVDV3 HOLE |
| DVVDV4 HOLE |
| DVVDV5 HOLE |
| *DELPART* |
| DVVDV1 HOLE |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:14:56 2002 |
| *PART* |
| DVVDV1 HOLE |
| DVVDV6 HOLE |
| DVVDV7 HOLE |
| *PART* |
| J17 JUMP2X9 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X9 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X9 |
| "Description" dvourady hrebinek 2x9 pinu |
| *PART* |
| J18 JUMP2X6 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X6 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X6 |
| "Description" dvourady hrebinek 2x6 pinu |
| *PART* |
| J19 JUMP2X6 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:28:06 2002 |
| *PART* |
| T1 TP |
| *SET_ATTRIBUTE* PARTTYPE TP |
| "Description" testovaci body |
| *SET_ATTRIBUTE* DECAL TP |
| "Description" testovaci bod s dirou |
| *PART* |
| T2 TP |
| T3 TP |
| T4 TP |
| T5 TP |
| T6 TP |
| T7 TP |
| T8 TP |
| *DELPART* |
| T2 TP |
| T8 TP |
| T7 TP |
| T6 TP |
| *PART* |
| T2 TP |
| T6 TP |
| T7 TP |
| T8 TP |
| T9 TP |
| T10 TP |
| T11 TP |
| T12 TP |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:34:43 2002 |
| *NET* |
| *SIGNAL* $$$1 0.5 |
| J9.1 T1.1 |
| T1.1 T12.1 |
| T12.1 T8.1 |
| T8.1 J10.40 |
| *SIGNAL* $$$2 0.5 |
| J10.38 T7.1 |
| T7.1 T11.1 |
| T11.1 T3.1 |
| T3.1 J9.2 |
| *SIGNAL* $$$3 0.5 |
| J10.1 T4.1 |
| T4.1 T10.1 |
| T10.1 T6.1 |
| T6.1 J10.36 |
| *SIGNAL* $$$4 0.5 |
| J10.34 T2.1 |
| T2.1 T9.1 |
| T9.1 T5.1 |
| T5.1 J10.2 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:48:24 2002 |
| *NET* |
| *SIGNAL* $$$1 2 |
| T1.1 T12.1 |
| *SIGNAL* $$$2 2 |
| T11.1 T3.1 |
| *SIGNAL* $$$3 2 |
| T4.1 T10.1 |
| *SIGNAL* $$$4 2 |
| T9.1 T5.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 17:57:02 2002 |
| *DELPIN* |
| T2.1 $$$4 |
| *SPLITNET* |
| *SIGNAL* $$$2 |
| J9.2 T3.1 J10.38 |
| *SIGNAL* $$$5 |
| T7.1 T11.1 |
| *DELPIN* |
| T3.1 $$$2 |
| T5.1 $$$4 |
| T7.1 $$$5 |
| T11.1 $$$5 |
| T9.1 $$$4 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:03:44 2002 |
| *PART* |
| HFGH1 HOLE |
| *SET_ATTRIBUTE* PARTTYPE HOLE |
| "Description" otvor pro ruzne prumery sroubu |
| *SET_ATTRIBUTE* DECAL HOLE_M3 |
| "Description" otvor pro sroub M3 |
| *PART* |
| HFGH2 HOLE |
| HFGH3 HOLE |
| HFGH4 HOLE |
| HFGH5 HOLE |
| HFGH6 HOLE |
| HFGH7 HOLE |
| HFGH8 HOLE |
| HFGH9 HOLE |
| HFGH10 HOLE |
| HFGH11 HOLE |
| HFGH12 HOLE |
| J5 JUMP2X7 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X7 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X7 |
| "Description" dvourady hrebinek 2x7 pinu |
| *DELPART* |
| J5 JUMP2X7 |
| *PART* |
| J5 JUMP2X6 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X6 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X6 |
| "Description" dvourady hrebinek 2x6 pinu |
| *PART* |
| J16 JUMP2X6 |
| HFGH13 PAD |
| *SET_ATTRIBUTE* PARTTYPE PAD |
| "Value" ??? |
| "Description" plne plosky ruznych prumeru |
| *SET_ATTRIBUTE* DECAL PAD3 |
| "Description" ploska s prumerem 3 mm |
| *PART* |
| HFGH14 PAD |
| HFGH15 PAD |
| HFGH16 PAD |
| HFGH17 PAD |
| HFGH18 PAD |
| *NET* |
| *SIGNAL* $$$1 0.5 |
| J9.1 HFGH17.1 |
| HFGH17.1 HFGH16.1 |
| HFGH16.1 HFGH13.1 |
| HFGH13.1 J10.40 |
| *SIGNAL* $$$2 0.5 |
| J10.38 HFGH14.1 |
| HFGH14.1 HFGH15.1 |
| HFGH15.1 HFGH18.1 |
| HFGH18.1 J10.1 |
| J10.38 HFGH14.1 |
| *SIGNAL* $$$1 0.5 |
| HFGH16.1 HFGH17.1 |
| *DELPIN* |
| *NET* |
| *SIGNAL* $$$2 0.5 |
| HFGH14.1 J10.36 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:17:15 2002 |
| *SPLITNET* |
| *SIGNAL* $$$2 |
| HFGH15.1 HFGH18.1 HFGH14.1 |
| *SIGNAL* $$$3 |
| J10.36 J10.38 J10.1 |
| *SPLITNET* |
| *SIGNAL* $$$1 |
| HFGH16.1 HFGH17.1 HFGH13.1 |
| *SIGNAL* $$$4 |
| J10.40 J9.1 |
| *DELPIN* |
| J10.1 $$$3 |
| J9.1 $$$4 |
| J10.40 $$$4 |
| *PART* |
| HFGH19 PAD |
| HFGH20 PAD |
| HFGH21 PAD |
| HFGH22 PAD |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:18:50 2002 |
| *NET* |
| *SIGNAL* $$$2 3 |
| HFGH21.1 HFGH14.1 |
| *SIGNAL* $$$1 3 |
| HFGH13.1 HFGH22.1 |
| *SIGNAL* $$$2 3 |
| HFGH20.1 HFGH18.1 |
| *SIGNAL* $$$1 3 |
| HFGH17.1 HFGH19.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:20:06 2002 |
| *PART* |
| T1 TP |
| *SET_ATTRIBUTE* PARTTYPE TP |
| "Description" testovaci body |
| *SET_ATTRIBUTE* DECAL TP |
| "Description" testovaci bod s dirou |
| *PART* |
| T2 TP |
| T3 TP |
| T4 TP |
| T5 TP |
| *NET* |
| *SIGNAL* $$$4 0.5 |
| T5.1 T4.1 |
| T4.1 T3.1 |
| T3.1 T2.1 |
| T2.1 T1.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:23:02 2002 |
| *NET* |
| *SIGNAL* $$$4 2 |
| T2.1 T3.1 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:24:53 2002 |
| *PART* |
| J17 JUMP2X20 |
| J18 JUMP2X20 |
| J19 JUMP2X6 |
| J20 JUMP2X6 |
| J21 JUMP2X6 |
| J22 JUMP2X6 |
| J23 JUMP2X5 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X5 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X5 |
| "Description" dvourady hrebinek 2x5 pinu |
| *PART* |
| J24 JUMP2X8 |
| *SET_ATTRIBUTE* PARTTYPE JUMP2X8 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP2X8 |
| "Description" dvourady hrebinek 2x8 pinu |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- Untitled -- Sat Dec 07 18:34:34 2002 |
| *END* |
| /schemata/picuniversal/PIC783/zaloha/PIC783.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/zaloha/Session.log |
|---|
| --- picuniversal/PIC783/zaloha/ao_attr.err (nonexistent) |
| +++ picuniversal/PIC783/zaloha/ao_attr.err (revision 6) |
| @@ -0,0 +1,14 @@ |
| +Assembly Option Service has detected inproper attribute values |
| + |
| +Sat Dec 07 10:17:12 2002 |
| + |
| +Current Job : Untitled |
| + |
| + |
| +Format: |
| +OBJ_NAME |
| +OLD_VALUE{EMPTY;TOO_LONG} |
| +NEW_VALUE{DELETED;TOO_LONG} |
| +RESUME |
| + |
| + |
| /schemata/picuniversal/PIC783/zaloha/f1.opj |
|---|
| 0,0 → 1,64 |
| (ExpressProject "" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (File ".\pic783.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (NoModify) |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "D:\@KAKLIK\SCHEMATA\PIC783\PIC783.asc") |
| (OTHER_Netlist_File2 "D:\@KAKLIK\SCHEMATA\PIC783\PIC783.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File ".\pic783.net" |
| (Type "Report")) |
| (File ".\pic783.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (JUMP6 |
| (FullPartName "JUMP6.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0")) |
| (JUMP8 |
| (FullPartName "JUMP8.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 66 712 66 394") |
| (Scroll "0 30") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\PIC783\PIC783.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/picuniversal/PIC783/zaloha/hispeed.lst |
|---|
| 0,0 → 1,2 |
| ELECTRODYNAMIC CHECKING REPORT -- Untitled -- Sat Dec 07 16:23:41 2002 |
| /schemata/picuniversal/PIC783/zaloha/pic783.dbk |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/zaloha/pic783.dsn |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/PIC783/zaloha/pic783.onl |
|---|
| 0,0 → 1,411 |
| (PCB PIC783 |
| (description |
| (timeStamp "2002 12 06 18 18 35") |
| (program "CAPTURE.EXE" (Version "9.10.157")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "PIC_universal") |
| (date "Friday, December 06, 2002") |
| (document "D:\\@KAKLIK\\SCHEMATA\\PIC783\\PIC783.DSN") |
| (revision "1.0") |
| (organization "") |
| (address1 "Decros s.r.o") |
| (address2 "J.S.Baara 40") |
| (address3 "370 01 Ceske Budejovice") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP6 |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP6) |
| (Device JUMP6) |
| (timestamp 000006FB) |
| ("Source Package" JUMP6) |
| (Value JUMP6))) |
| (place J8 |
| (property |
| ("PCB Footprint" JUMP6) |
| (Device JUMP6) |
| (timestamp 00003998) |
| ("Source Package" JUMP6) |
| (Value JUMP6)))) |
| (component JUMP8 |
| (place J6 |
| (property |
| ("PCB Footprint" JUMP8) |
| (Device JUMP8) |
| (timestamp 00003948) |
| ("Source Package" JUMP8) |
| (Value JUMP8))) |
| (place J7 |
| (property |
| ("PCB Footprint" JUMP8) |
| (Device JUMP8) |
| (timestamp 0000394A) |
| ("Source Package" JUMP8) |
| (Value JUMP8)))) |
| (component PIC16F873/876 |
| (place U1 |
| (property |
| ("PCB Footprint" SO28_300) |
| (Device PIC16f873/876) |
| (timestamp 00000009) |
| ("Source Package" PIC16F873/876) |
| (Value PIC16F873/876)))) |
| (component "XTAL-C" |
| (place X1 |
| (property |
| ("PCB Footprint" XTALSMD_C) |
| (Device XTAL_C) |
| (timestamp 00000014) |
| ("Source Package" "XTAL-C") |
| (Value 4MHz)))) |
| (component "C-ELYT" |
| (place C1 |
| (property |
| ("PCB Footprint" CE020X5) |
| (Device ELYT) |
| (timestamp 00003B92) |
| ("Source Package" "C-ELYT") |
| (Value "C-ELYT")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 00003AD7) |
| ("Source Package" R) |
| (Value 10K))) |
| (place R2 |
| (property |
| ("PCB Footprint" RL090) |
| (Device R) |
| (timestamp 0000001C) |
| ("Source Package" R) |
| (Value 10K)))) |
| (component C |
| (place C2 |
| (property |
| ("PCB Footprint" CK025) |
| (Device C) |
| (timestamp 00000030) |
| ("Source Package" C) |
| (Value 10nF))))) |
| (library |
| (image "XTAL-C" |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-REST.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4)))) |
| (image PIC16F873/876 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\MPC.OLB) |
| (Device PIC16f873/876)) |
| (pin 999 2 |
| (property |
| (pinname RA0/AN0) |
| (pintype 1))) |
| (pin 999 3 |
| (property |
| (pinname RA1/AN1) |
| (pintype 1))) |
| (pin 999 4 |
| (property |
| (pinname RA2/AN2) |
| (pintype 1))) |
| (pin 999 5 |
| (property |
| (pinname RA3/AN3) |
| (pintype 1))) |
| (pin 999 6 |
| (property |
| (pinname RA4/TOCKI) |
| (pintype 1))) |
| (pin 999 7 |
| (property |
| (pinname RA5/AN4/SS#) |
| (pintype 1))) |
| (pin 999 11 |
| (property |
| (pinname RC0/T1OSO/T1CKI) |
| (pintype 1))) |
| (pin 999 12 |
| (property |
| (pinname RC1/T1OSI/CCP2) |
| (pintype 1))) |
| (pin 999 13 |
| (property |
| (pinname RC2/CCP1) |
| (pintype 1))) |
| (pin 999 14 |
| (property |
| (pinname RC3/SCK/SCL) |
| (pintype 1))) |
| (pin 999 15 |
| (property |
| (pinname RC4/SDI/SDA) |
| (pintype 1))) |
| (pin 999 16 |
| (property |
| (pinname RC5/SDO) |
| (pintype 1))) |
| (pin 999 17 |
| (property |
| (pinname RC6/TX/CK) |
| (pintype 1))) |
| (pin 999 18 |
| (property |
| (pinname RC7/RX/DT) |
| (pintype 1))) |
| (pin 999 21 |
| (property |
| (pinname RB0/INT) |
| (pintype 1))) |
| (pin 999 22 |
| (property |
| (pinname RB1) |
| (pintype 1))) |
| (pin 999 23 |
| (property |
| (pinname RB2) |
| (pintype 1))) |
| (pin 999 24 |
| (property |
| (pinname RB3/PGM) |
| (pintype 1))) |
| (pin 999 25 |
| (property |
| (pinname RB4) |
| (pintype 1))) |
| (pin 999 26 |
| (property |
| (pinname RB5) |
| (pintype 1))) |
| (pin 999 27 |
| (property |
| (pinname RB6/PGC) |
| (pintype 1))) |
| (pin 999 28 |
| (property |
| (pinname RB7/PGD) |
| (pintype 1))) |
| (pin 999 1 |
| (property |
| (pinname MCLR#/VPP/THV) |
| (pintype 0))) |
| (pin 999 8 |
| (property |
| (pinname VSS) |
| (pintype 7))) |
| (pin 999 19 |
| (property |
| (pinname VSS) |
| (pintype 7))) |
| (pin 999 20 |
| (property |
| (pinname VDD) |
| (pintype 7))) |
| (pin 999 9 |
| (property |
| (pinname OSC1/CLKIN) |
| (pintype 0))) |
| (pin 999 10 |
| (property |
| (pinname OSC2/CLKOUT) |
| (pintype 2)))) |
| (image R |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "C-ELYT" |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB")) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4))) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4)))) |
| (image C |
| (property |
| (sourcelib "C:\\LIBRARY\\ORCAD91\\DEV-RLC.OLB")) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image JUMP6 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP6)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4)))) |
| (image JUMP8 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP8)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname 7) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname 8) |
| (pintype 4))))) |
| (network |
| (net +3V |
| (property |
| (nettype S)) |
| (pins |
| J1-4 C1-A R2-2 C2-2 U1-20)) |
| (net DATAPROG |
| (pins |
| J6-8 U1-28 J1-5)) |
| (net CLKPROG |
| (pins |
| J6-7 U1-27 J1-6)) |
| (net VPP |
| (pins |
| R2-1 U1-1 J1-1)) |
| (net N14668 |
| (pins |
| J7-1 U1-11)) |
| (net N14671 |
| (pins |
| J7-2 U1-12)) |
| (net N14674 |
| (pins |
| J7-3 U1-13)) |
| (net N14677 |
| (pins |
| J7-4 U1-14)) |
| (net N14680 |
| (pins |
| J7-5 U1-15)) |
| (net N14683 |
| (pins |
| J7-6 U1-16)) |
| (net N14686 |
| (pins |
| J7-7 U1-17)) |
| (net N14689 |
| (pins |
| J7-8 U1-18)) |
| (net N14692 |
| (pins |
| J6-1 U1-21)) |
| (net N14698 |
| (pins |
| J6-2 U1-22)) |
| (net N14704 |
| (pins |
| J6-3 U1-23)) |
| (net N14710 |
| (pins |
| J6-4 U1-24 R1-2)) |
| (net N14716 |
| (pins |
| J6-5 U1-25)) |
| (net N14722 |
| (pins |
| J6-6 U1-26)) |
| (net N14746 |
| (pins |
| U1-2 J8-1)) |
| (net N14749 |
| (pins |
| U1-3 J8-2)) |
| (net N14752 |
| (pins |
| U1-4 J8-3)) |
| (net N14755 |
| (pins |
| U1-5 J8-4)) |
| (net N14758 |
| (pins |
| U1-6 J8-5)) |
| (net N14761 |
| (pins |
| U1-7 J8-6)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| X1-3 C1-C J1-2 U1-8 U1-19 R1-1 C2-1)) |
| (net N11758 |
| (pins |
| U1-10 X1-2)) |
| (net N00331 |
| (pins |
| U1-9 X1-1))) |
| ) |
| /schemata/picuniversal/PIC783/zaloha/pic783.opj |
|---|
| 0,0 → 1,41 |
| (ExpressProject "" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (File ".\sbxv20.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (NoModify) |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "D:\@Kaklik\schemata\PIC783\SBXV20.asc") |
| (OTHER_Netlist_File2 "SBXV20.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File ".\sbxv20.asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Outputs") |
| (Select "Design Resources" "D:\@Kaklik\schemata\PIC783\sbxv20.dsn")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 160 676 -4 -23 0 557 0 473")) |
| (Tab 1)))) |
| /schemata/picuniversal/PIC783/zaloha/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.DRC |
|---|
| 0,0 → 1,39 |
| Checking Pins and Pin Connections |
| -------------------------------------------------- |
| Checking Schematic: SCHEMATIC1 |
| -------------------------------------------------- |
| Checking Electrical Rules |
| Checking for Unconnected Nets |
| Checking Off-Page Connections |
| Checking Pin to Port Connections |
| Checking for Invalid References |
| Checking for Duplicate References |
| Checking for Compatibility with SDT |
| ERROR: [DRC0018] Pin number is not numeric D11,A |
| SCHEMATIC1, PAGE1 (33.02, 106.68) |
| ERROR: [DRC0018] Pin number is not numeric D11,C |
| SCHEMATIC1, PAGE1 (43.18, 106.68) |
| ERROR: [DRC0018] Pin number is not numeric C2,A |
| SCHEMATIC1, PAGE1 (40.64, 78.74) |
| ERROR: [DRC0018] Pin number is not numeric C2,C |
| SCHEMATIC1, PAGE1 (40.64, 88.90) |
| ERROR: [DRC0018] Pin number is not numeric D6,A |
| SCHEMATIC1, PAGE1 (40.64, 60.96) |
| ERROR: [DRC0018] Pin number is not numeric D6,C |
| SCHEMATIC1, PAGE1 (40.64, 71.12) |
| ERROR: [DRC0018] Pin number is not numeric D13,A |
| SCHEMATIC1, PAGE1 (88.90, 142.24) |
| ERROR: [DRC0018] Pin number is not numeric D13,C |
| SCHEMATIC1, PAGE1 (88.90, 152.40) |
| ERROR: [DRC0018] Pin number is not numeric D10,A |
| SCHEMATIC1, PAGE1 (53.34, 129.54) |
| ERROR: [DRC0018] Pin number is not numeric D10,C |
| SCHEMATIC1, PAGE1 (43.18, 129.54) |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.ONL |
|---|
| 0,0 → 1,511 |
| (PCB SOLARNI_ROBOT |
| (description |
| (timeStamp "2004 08 18 12 48 29") |
| (program "CAPTURE.EXE" (Version "9.2.448 CIS - D")) |
| (source "Original data from OrCAD/CAPTURE schematic") |
| (title "Dark Walker") |
| (date "Wednesday, August 18, 2004") |
| (document "D:\\@KAKLIK\\SCHEMATA\\ROBOTI\\SOLARNI\\2004\\UNIVERZALNI DESKA\\SOLARNI_ROBOT.DSN") |
| (revision "3") |
| (organization "") |
| (address1 "") |
| (address2 "") |
| (address3 "") |
| (address4 "") |
| (partvaluecombine "{Value}") |
| (pcbfootprintcombine "{Device}@{PCB Footprint}")) |
| (structure ) |
| (placement |
| (component JUMP1 |
| (place J10 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0001132C) |
| ("Source Package" JUMP1) |
| (Value RB5))) |
| (place J11 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000B982) |
| ("Source Package" JUMP1) |
| (Value "solar -"))) |
| (place J12 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0001133E) |
| ("Source Package" JUMP1) |
| (Value RB4))) |
| (place J14 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0000B9B3) |
| ("Source Package" JUMP1) |
| (Value "solar +"))) |
| (place J1 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0001125D) |
| ("Source Package" JUMP1) |
| (Value Solar+))) |
| (place J2 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00011274) |
| ("Source Package" JUMP1) |
| (Value Vcc))) |
| (place J4 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 000112B1) |
| ("Source Package" JUMP1) |
| (Value RA2))) |
| (place J5 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 000112C3) |
| ("Source Package" JUMP1) |
| (Value RA3))) |
| (place J6 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 000112D5) |
| ("Source Package" JUMP1) |
| (Value RA4))) |
| (place J7 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 000112E7) |
| ("Source Package" JUMP1) |
| (Value RB1))) |
| (place J8 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 00011308) |
| ("Source Package" JUMP1) |
| (Value RA1))) |
| (place J9 |
| (property |
| ("PCB Footprint" JUMP1) |
| (Device JUMP1) |
| (timestamp 0001131A) |
| ("Source Package" JUMP1) |
| (Value RA0)))) |
| (component PIC16F84/SO |
| (place U5 |
| (property |
| ("PCB Footprint" SO18_300) |
| (Device PIC16F83_84_84A__18_PIN) |
| (timestamp 000119B7) |
| ("Source Package" PIC16F84/SO) |
| (Value PIC16F84/SO)))) |
| (component JUMP6 |
| (place J3 |
| (property |
| ("PCB Footprint" JUMP6) |
| (Device JUMP6) |
| (timestamp 000006FB) |
| ("Source Package" JUMP6) |
| (Value PROGRAMMER)))) |
| (component PUSH050x050SMD |
| (place SW1 |
| (property |
| ("PCB Footprint" PUSH050x050SMD) |
| (Device PB4PIN) |
| (timestamp 000118C8) |
| ("Source Package" PUSH050x050SMD) |
| (Value RESET)))) |
| (component XTAL |
| (place X1 |
| (property |
| ("PCB Footprint" XTAL010/L) |
| (Device XTAL) |
| (timestamp 00007334) |
| ("Source Package" XTAL) |
| (Value 32KHz)))) |
| (component "D-SCHOTTKY" |
| (place D10 |
| (property |
| ("PCB Footprint" MELF) |
| (Device D) |
| (timestamp 0000ED80) |
| ("Source Package" "D-SCHOTTKY") |
| (Value "D-SCHOTTKY"))) |
| (place D11 |
| (property |
| ("PCB Footprint" MELF) |
| (Device D) |
| (timestamp 0000ED24) |
| ("Source Package" "D-SCHOTTKY") |
| (Value "D-SCHOTTKY"))) |
| (place D6 |
| (property |
| ("PCB Footprint" MELF) |
| (Device D) |
| (timestamp 00000095) |
| ("Source Package" "D-SCHOTTKY") |
| (Value "D-SCHOTTKY")))) |
| (component LED3mm |
| (place D13 |
| (property |
| ("PCB Footprint" LED3) |
| (Device LED) |
| (timestamp 000116DF) |
| ("Source Package" LED3mm) |
| (Value LED3mm)))) |
| (component C0805 |
| (place C1 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 0001178A) |
| ("Source Package" C0805) |
| (Value M1)))) |
| (component "C-ELYT-CE050X10/L" |
| (place C2 |
| (property |
| ("PCB Footprint" CE050X10/L) |
| (Device "C-ELYT") |
| (timestamp 00011833) |
| ("Source Package" "C-ELYT-CE050X10/L") |
| (Value "3 G")))) |
| (component R |
| (place R1 |
| (property |
| ("PCB Footprint" R0805) |
| (Device R) |
| (timestamp 000088DF) |
| ("Source Package" R) |
| (Value 56k))) |
| (place R2 |
| (property |
| ("PCB Footprint" R0805) |
| (Device R) |
| (timestamp 0000D1B3) |
| ("Source Package" R) |
| (Value 150)))) |
| (component C |
| (place C6 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 0000712C) |
| ("Source Package" C) |
| (Value 86p))) |
| (place C7 |
| (property |
| ("PCB Footprint" C0805) |
| (Device C) |
| (timestamp 00007169) |
| ("Source Package" C) |
| (Value 86p)))) |
| (component MAX809 |
| (place U8 |
| (property |
| ("PCB Footprint" SOT23) |
| (Device SOT23) |
| (timestamp 0001220B) |
| ("Source Package" MAX809) |
| (Value MAX809/SOT23))))) |
| (library |
| (image XTAL |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device XTAL)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image R |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device R)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image PIC16F84/SO |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\MICROCHIP\\CPU_PIC16_FLASH.OLB) |
| (Device PIC16F83_84_84A__18_PIN)) |
| (pin 999 1 |
| (property |
| (pinname RA2) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname RA3) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname RA4/T0CKI) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname MCLR#) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname GND) |
| (pintype 7))) |
| (pin 999 6 |
| (property |
| (pinname RB0/INT) |
| (pintype 4))) |
| (pin 999 7 |
| (property |
| (pinname RB1) |
| (pintype 4))) |
| (pin 999 8 |
| (property |
| (pinname RB2) |
| (pintype 4))) |
| (pin 999 9 |
| (property |
| (pinname RB3) |
| (pintype 4))) |
| (pin 999 10 |
| (property |
| (pinname RB4) |
| (pintype 4))) |
| (pin 999 11 |
| (property |
| (pinname RB5) |
| (pintype 4))) |
| (pin 999 12 |
| (property |
| (pinname RB6) |
| (pintype 4))) |
| (pin 999 13 |
| (property |
| (pinname RB7) |
| (pintype 4))) |
| (pin 999 14 |
| (property |
| (pinname VDD) |
| (pintype 7))) |
| (pin 999 15 |
| (property |
| (pinname CLKOUT/OSC2) |
| (pintype 4))) |
| (pin 999 16 |
| (property |
| (pinname CLKIN/OSC1) |
| (pintype 4))) |
| (pin 999 17 |
| (property |
| (pinname RA0) |
| (pintype 4))) |
| (pin 999 18 |
| (property |
| (pinname RA1) |
| (pintype 4)))) |
| (image MAX809 |
| (property |
| (sourcelib C:\\LIBRARY\\KAKLIK\\ORCAD9X\\RUZNE.OLB) |
| (Device SOT23)) |
| (pin 999 3 |
| (property |
| (pinname Vcc) |
| (pintype 7))) |
| (pin 999 1 |
| (property |
| (pinname GND) |
| (pintype 7))) |
| (pin 999 2 |
| (property |
| (pinname RESET#) |
| (pintype 2)))) |
| (image JUMP1 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\JUMP.OLB) |
| (Device JUMP1)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4)))) |
| (image C0805 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "C-ELYT-CE050X10/L" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_RLC.OLB) |
| (Device "C-ELYT")) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image C |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_RLC.OLB) |
| (Device C)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4)))) |
| (image "D-SCHOTTKY" |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\GEN_D.OLB) |
| (Device D)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image JUMP6 |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD91\\SWITCH.OLB) |
| (Device JUMP6)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))) |
| (pin 999 3 |
| (property |
| (pinname 3) |
| (pintype 4))) |
| (pin 999 4 |
| (property |
| (pinname 4) |
| (pintype 4))) |
| (pin 999 5 |
| (property |
| (pinname 5) |
| (pintype 4))) |
| (pin 999 6 |
| (property |
| (pinname 6) |
| (pintype 4)))) |
| (image LED3mm |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_OPTO.OLB) |
| (Device LED)) |
| (pin 999 A |
| (property |
| (pinname A) |
| (pintype 4))) |
| (pin 999 C |
| (property |
| (pinname C) |
| (pintype 4)))) |
| (image PUSH050x050SMD |
| (property |
| (sourcelib C:\\LIBRARY\\ORCAD9X\\COM_SW.OLB) |
| (Device PB4PIN)) |
| (pin 999 1 |
| (property |
| (pinname 1) |
| (pintype 4))) |
| (pin 999 2 |
| (property |
| (pinname 2) |
| (pintype 4))))) |
| (network |
| (net SOLAR+ |
| (pins |
| J14-1 J1-1 U8-3 D6-A)) |
| (net N70673 |
| (pins |
| U5-18 J8-1)) |
| (net N61017 |
| (pins |
| U5-6 D10-A)) |
| (net N70730 |
| (pins |
| U5-17 J9-1)) |
| (net N70844 |
| (pins |
| U5-10 J12-1)) |
| (net N70787 |
| (pins |
| U5-11 J10-1)) |
| (net N71133 |
| (pins |
| J7-1 U5-7)) |
| (net N71190 |
| (pins |
| J6-1 U5-3)) |
| (net N71247 |
| (pins |
| J5-1 U5-2)) |
| (net N71304 |
| (pins |
| J4-1 U5-1)) |
| (net N56099 |
| (pins |
| D11-A U5-8 U8-2)) |
| (net N56717 |
| (pins |
| R2-1 U5-9)) |
| (net N57119 |
| (pins |
| R2-2 D13-A)) |
| (net GND |
| (property |
| (nettype S)) |
| (pins |
| C6-1 J3-2 SW1-2 U5-5 R1-1 C7-2 U8-1 C2-C D13-C |
| C1-2 J11-1)) |
| (net N33483 |
| (pins |
| C6-2 X1-1 U5-16)) |
| (net N17969 |
| (pins |
| X1-2 C7-1 U5-15)) |
| (net CLKPROG |
| (pins |
| J3-6 U5-12)) |
| (net DATAPROG |
| (pins |
| J3-5 U5-13)) |
| (net VPP |
| (pins |
| R1-2 D10-C U5-4 D11-C J3-1 SW1-1)) |
| (net VCC |
| (property |
| (nettype S)) |
| (pins |
| J3-4 C1-1 D6-C C2-A U5-14 J2-1))) |
| ) |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.asc |
|---|
| 0,0 → 1,73 |
| *PADS-PCB* |
| *PART* |
| C1 C@C0805 |
| C2 C-ELYT@CE050X10/L |
| C6 C@C0805 |
| C7 C@C0805 |
| D10 D@MELF |
| D11 D@MELF |
| D13 LED@LED3 |
| D6 D@MELF |
| J1 JUMP1@JUMP1 |
| J10 JUMP1@JUMP1 |
| J11 JUMP1@JUMP1 |
| J12 JUMP1@JUMP1 |
| J14 JUMP1@JUMP1 |
| J2 JUMP1@JUMP1 |
| J3 JUMP6@JUMP6 |
| J4 JUMP1@JUMP1 |
| J5 JUMP1@JUMP1 |
| J6 JUMP1@JUMP1 |
| J7 JUMP1@JUMP1 |
| J8 JUMP1@JUMP1 |
| J9 JUMP1@JUMP1 |
| R1 R@R0805 |
| R2 R@R0805 |
| SW1 PB4PIN@PUSH050x050SMD |
| U5 PIC16F83_84_84A__18_PIN@SO18_300 |
| U8 SOT23@SOT23 |
| X1 XTAL@XTAL010/L |
| *NET* |
| *SIGNAL* SOLAR+ |
| J14.1 J1.1 U8.3 D6.A |
| *SIGNAL* N70673 |
| U5.18 J8.1 |
| *SIGNAL* N61017 |
| U5.6 D10.A |
| *SIGNAL* N70730 |
| U5.17 J9.1 |
| *SIGNAL* N70844 |
| U5.10 J12.1 |
| *SIGNAL* N70787 |
| U5.11 J10.1 |
| *SIGNAL* N71133 |
| J7.1 U5.7 |
| *SIGNAL* N71190 |
| J6.1 U5.3 |
| *SIGNAL* N71247 |
| J5.1 U5.2 |
| *SIGNAL* N71304 |
| J4.1 U5.1 |
| *SIGNAL* N56099 |
| D11.A U5.8 U8.2 |
| *SIGNAL* N56717 |
| R2.1 U5.9 |
| *SIGNAL* N57119 |
| R2.2 D13.A |
| *SIGNAL* GND |
| C6.1 J3.2 SW1.2 U5.5 R1.1 C7.2 U8.1 C2.C |
| D13.C C1.2 J11.1 |
| *SIGNAL* N33483 |
| C6.2 X1.1 U5.16 |
| *SIGNAL* N17969 |
| X1.2 C7.1 U5.15 |
| *SIGNAL* CLKPROG |
| J3.6 U5.12 |
| *SIGNAL* DATAPROG |
| J3.5 U5.13 |
| *SIGNAL* VPP |
| R1.2 D10.C U5.4 D11.C J3.1 SW1.1 |
| *SIGNAL* VCC |
| J3.4 C1.1 D6.C C2.A U5.14 J2.1 |
| *END* |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.eco |
|---|
| 0,0 → 1,174 |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Thu May 01 20:48:30 2003 |
| *CREATE_GENERAL_RULES* CLEARANCE |
| HIERARCHY_OBJECT NET:VPP |
| HIERARCHY_OBJECT NET:VCC |
| HIERARCHY_OBJECT NET:N43710 |
| HIERARCHY_OBJECT NET:N43635 |
| HIERARCHY_OBJECT NET:N43578 |
| HIERARCHY_OBJECT NET:N43434 |
| HIERARCHY_OBJECT NET:N43375 |
| HIERARCHY_OBJECT NET:N43307 |
| HIERARCHY_OBJECT NET:N43248 |
| HIERARCHY_OBJECT NET:N40418 |
| HIERARCHY_OBJECT NET:N40369 |
| HIERARCHY_OBJECT NET:N40321 |
| HIERARCHY_OBJECT NET:N40272 |
| HIERARCHY_OBJECT NET:N40224 |
| HIERARCHY_OBJECT NET:N36976 |
| HIERARCHY_OBJECT NET:N36828 |
| HIERARCHY_OBJECT NET:N36680 |
| HIERARCHY_OBJECT NET:N35905 |
| HIERARCHY_OBJECT NET:N35813 |
| HIERARCHY_OBJECT NET:N35721 |
| HIERARCHY_OBJECT NET:N34915 |
| HIERARCHY_OBJECT NET:N34577 |
| HIERARCHY_OBJECT NET:N34520 |
| HIERARCHY_OBJECT NET:N33483 |
| HIERARCHY_OBJECT NET:N18585 |
| HIERARCHY_OBJECT NET:N18313 |
| HIERARCHY_OBJECT NET:N17969 |
| HIERARCHY_OBJECT NET:GND |
| HIERARCHY_OBJECT NET:DATAPROG |
| HIERARCHY_OBJECT NET:CLKPROG |
| MIN_TRACK_WIDTH 15 |
| REC_TRACK_WIDTH 15 |
| MAX_TRACK_WIDTH 15 |
| TRACK_TO_TRACK 6 |
| VIA_TO_TRACK 6 |
| VIA_TO_VIA 6 |
| PAD_TO_TRACK 6 |
| PAD_TO_VIA 6 |
| PAD_TO_PAD 6 |
| SMD_TO_TRACK 6 |
| SMD_TO_VIA 6 |
| SMD_TO_PAD 6 |
| SMD_TO_SMD 6 |
| COPPER_TO_TRACK 6 |
| COPPER_TO_VIA 6 |
| COPPER_TO_PAD 6 |
| COPPER_TO_SMD 6 |
| TEXT_TO_TRACK 6 |
| TEXT_TO_VIA 6 |
| TEXT_TO_PAD 6 |
| TEXT_TO_SMD 6 |
| OUTLINE_TO_TRACK 6 |
| OUTLINE_TO_VIA 6 |
| OUTLINE_TO_PAD 6 |
| OUTLINE_TO_SMD 6 |
| DRILL_TO_TRACK 6 |
| DRILL_TO_VIA 6 |
| DRILL_TO_PAD 6 |
| DRILL_TO_SMD 6 |
| DRILL_TO_COPPER 6 |
| SAME_NET_SMD_TO_VIA 6 |
| SAME_NET_SMD_TO_CRN 6 |
| SAME_NET_VIA_TO_VIA 6 |
| SAME_NET_PAD_TO_CRN 6 |
| SAME_NET_TRACK_TO_CRN 0 |
| *CREATE_GENERAL_RULES* CLEARANCE |
| HIERARCHY_OBJECT NET:VCC |
| MIN_TRACK_WIDTH 17 |
| REC_TRACK_WIDTH 17 |
| MAX_TRACK_WIDTH 17 |
| TRACK_TO_TRACK 6 |
| VIA_TO_TRACK 6 |
| VIA_TO_VIA 6 |
| PAD_TO_TRACK 6 |
| PAD_TO_VIA 6 |
| PAD_TO_PAD 6 |
| SMD_TO_TRACK 6 |
| SMD_TO_VIA 6 |
| SMD_TO_PAD 6 |
| SMD_TO_SMD 6 |
| COPPER_TO_TRACK 6 |
| COPPER_TO_VIA 6 |
| COPPER_TO_PAD 6 |
| COPPER_TO_SMD 6 |
| TEXT_TO_TRACK 6 |
| TEXT_TO_VIA 6 |
| TEXT_TO_PAD 6 |
| TEXT_TO_SMD 6 |
| OUTLINE_TO_TRACK 6 |
| OUTLINE_TO_VIA 6 |
| OUTLINE_TO_PAD 6 |
| OUTLINE_TO_SMD 6 |
| DRILL_TO_TRACK 6 |
| DRILL_TO_VIA 6 |
| DRILL_TO_PAD 6 |
| DRILL_TO_SMD 6 |
| DRILL_TO_COPPER 6 |
| SAME_NET_SMD_TO_VIA 6 |
| SAME_NET_SMD_TO_CRN 6 |
| SAME_NET_VIA_TO_VIA 6 |
| SAME_NET_PAD_TO_CRN 6 |
| SAME_NET_TRACK_TO_CRN 0 |
| *CREATE_GENERAL_RULES* CLEARANCE |
| HIERARCHY_OBJECT NET:GND |
| MIN_TRACK_WIDTH 18 |
| REC_TRACK_WIDTH 18 |
| MAX_TRACK_WIDTH 18 |
| TRACK_TO_TRACK 6 |
| VIA_TO_TRACK 6 |
| VIA_TO_VIA 6 |
| PAD_TO_TRACK 6 |
| PAD_TO_VIA 6 |
| PAD_TO_PAD 6 |
| SMD_TO_TRACK 6 |
| SMD_TO_VIA 6 |
| SMD_TO_PAD 6 |
| SMD_TO_SMD 6 |
| COPPER_TO_TRACK 6 |
| COPPER_TO_VIA 6 |
| COPPER_TO_PAD 6 |
| COPPER_TO_SMD 6 |
| TEXT_TO_TRACK 6 |
| TEXT_TO_VIA 6 |
| TEXT_TO_PAD 6 |
| TEXT_TO_SMD 6 |
| OUTLINE_TO_TRACK 6 |
| OUTLINE_TO_VIA 6 |
| OUTLINE_TO_PAD 6 |
| OUTLINE_TO_SMD 6 |
| DRILL_TO_TRACK 6 |
| DRILL_TO_VIA 6 |
| DRILL_TO_PAD 6 |
| DRILL_TO_SMD 6 |
| DRILL_TO_COPPER 6 |
| SAME_NET_SMD_TO_VIA 6 |
| SAME_NET_SMD_TO_CRN 6 |
| SAME_NET_VIA_TO_VIA 6 |
| SAME_NET_PAD_TO_CRN 6 |
| SAME_NET_TRACK_TO_CRN 0 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SOLARNI_ROBOT.pcb -- Thu May 01 21:31:27 2003 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- Untitled -- Sat May 03 14:04:18 2003 |
| *CHGPART* |
| J1 JUMP1@JUMP1 JUMP1@JUMP1A |
| J14 JUMP1@JUMP1 JUMP1@JUMP1A |
| J2 JUMP1@JUMP1 JUMP1@JUMP1A |
| J11 JUMP1@JUMP1 JUMP1@JUMP1A |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- SOLARNI_ROBOT.pcb -- Sat May 03 16:21:10 2003 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- SOLARNI_ROBOT.pcb -- Sat May 03 16:26:31 2003 |
| *END* |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT_blz.eco |
|---|
| 0,0 → 1,114 |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- SOLARNI_ROBOT_blz.pcb -- Sat May 03 16:36:13 2003 |
| *CHGPART* |
| J13 JUMP1@JUMP1 JUMP1@JUMP1B |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- SOLARNI_ROBOT_blz.pcb -- Sat May 03 16:49:31 2003 |
| *END* |
| *PADS-ECO-V3.0-METRIC* |
| *REMARK* -- SOLARNI_ROBOT_blz.pcb -- Thu Aug 19 18:12:36 2004 |
| *PART* |
| J13 JUMP20 |
| *SET_ATTRIBUTE* PARTTYPE JUMP20 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP20 |
| "Value" ??? |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J15 JUMP20 |
| J16 JUMP20 |
| J17 JUMP20 |
| J18 JUMP20 |
| J19 JUMP20 |
| J20 JUMP20 |
| J21 JUMP20 |
| J22 JUMP20 |
| J23 JUMP20 |
| J24 JUMP20 |
| J25 JUMP20 |
| J26 JUMP20 |
| J27 JUMP20 |
| J28 JUMP20 |
| *END* |
| *PADS-ECO-V3.0-MILS* |
| *REMARK* -- SOLARNI_ROBOT_blz.pcb -- Thu Aug 19 19:10:23 2004 |
| *DELPART* |
| J13 JUMP20 |
| J15 JUMP20 |
| J16 JUMP20 |
| J17 JUMP20 |
| J18 JUMP20 |
| J19 JUMP20 |
| J20 JUMP20 |
| J21 JUMP20 |
| J22 JUMP20 |
| J23 JUMP20 |
| J24 JUMP20 |
| J25 JUMP20 |
| J27 JUMP20 |
| J28 JUMP20 |
| J26 JUMP20 |
| *PART* |
| J13 JUMP12 |
| *SET_ATTRIBUTE* DECAL JUMP12 |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J15 JUMP12 |
| J16 JUMP12 |
| J17 JUMP12 |
| J18 JUMP12 |
| J19 JUMP12 |
| J20 JUMP12 |
| J21 JUMP12 |
| J22 JUMP12 |
| J23 JUMP12 |
| J24 JUMP12 |
| *SET_ATTRIBUTE* DECAL JUMP12 |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J25 JUMP12 |
| J26 JUMP12 |
| J27 JUMP12 |
| J28 JUMP12 |
| J29 JUMP10 |
| *SET_ATTRIBUTE* PARTTYPE JUMP10 |
| "Value" ??? |
| *SET_ATTRIBUTE* DECAL JUMP10 |
| "Value" ??? |
| "Description" jednorady hrebinek 10 pinu |
| *PART* |
| J30 JUMP10 |
| J31 JUMP15 |
| *SET_ATTRIBUTE* DECAL JUMP15 |
| "Description" jednorady hrebinek 20 pinu |
| *PART* |
| J32 JUMP15 |
| *DELPART* |
| J13 JUMP12 |
| *END* |
| /schemata/picuniversal/solarni robot 2004/SOLARNI_ROBOT_blz.pcb |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/solarni robot 2004/solarni_robot.opj |
|---|
| 0,0 → 1,181 |
| (ExpressProject "solarni_robot" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\solarni_robot.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (DRC_Scope "0") |
| (DRC_Action "1") |
| (DRC_Create_Warnings "TRUE") |
| (DRC_Check_Ports "TRUE") |
| (DRC_Check_Off-Page_Connectors "TRUE") |
| (DRC_Identical_References "TRUE") |
| (DRC_Type_Mismatch "TRUE") |
| (DRC_Report_Ports_and_Off-page_Connectors "FALSE") |
| (DRC_SDT_Compatibility "TRUE") |
| (DRC_Report_Off-grid_Objects "FALSE") |
| (DRC_Check_Unconnected_Nets "TRUE") |
| (DRC_Report_Netnames "FALSE") |
| (DRC_View_Output "FALSE") |
| (DRC_Report_File |
| "D:\@Kaklik\schemata\roboti\solarni\2004\Univerzalni deska\SOLARNI_ROBOT.DRC") |
| (Netlist_TAB "7") |
| (OTHER_Part_Value "{Value}") |
| (OTHER_Netlist_File "SOLARNI_ROBOT.asc") |
| (OTHER_Netlist_File2 "SOLARNI_ROBOT.CMP") |
| (OTHER_View_Output "FALSE") |
| (OTHER_View_Output2 "FALSE") |
| (OTHER_Formatter "padspcb.dll") |
| (OTHER_PCB_Footprint "{Device}@{PCB Footprint}") |
| (OTHER_Switch0 "FALSE") |
| (OTHER_Switch1 "FALSE") |
| (OTHER_Switch2 "FALSE") |
| (OTHER_Switch3 "FALSE") |
| (OTHER_Switch4 "FALSE") |
| (OTHER_Switch5 "FALSE") |
| (OTHER_Switch6 "FALSE")) |
| (Folder "Outputs" |
| (File ".\solarni_robot.drc" |
| (Type "Report")) |
| (File ".\solarni_robot.asc" |
| (Type "Report")) |
| (File "..\upravy_kakl\solarbot..net" |
| (Type "Report")) |
| (File "..\upravy_kakl\solarbot..asc" |
| (Type "Report"))) |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (MAX809 |
| (FullPartName "MAX809.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (PIC16F84/SO |
| (FullPartName "PIC16F84/SO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\MICROCHIP\CPU_PIC16_FLASH.OLB") |
| (DeviceIndex "0")) |
| (PUSH050x050SMD |
| (FullPartName "PUSH050x050SMD.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_SW.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT-CE050X10/L |
| (FullPartName "C-ELYT-CE050X10/L.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (C0805 |
| (FullPartName "C0805.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (LED3mm |
| (FullPartName "LED3mm.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_OPTO.OLB") |
| (DeviceIndex "0")) |
| (JUMP1 |
| (FullPartName "JUMP1.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (C-ELYT |
| (FullPartName "C-ELYT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (SWON |
| (FullPartName "SWON.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_SW.OLB") |
| (DeviceIndex "0")) |
| (D-ZENER |
| (FullPartName "D-ZENER.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (R0805 |
| (FullPartName "R0805.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\COM_RLC.OLB") |
| (DeviceIndex "0")) |
| (RFD8P06LESM9A/TO |
| (FullPartName "RFD8P06LESM9A/TO.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| ("RELAY DPDT" |
| (FullPartName "RELAY DPDT.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\DISCRETE.OLB") |
| (DeviceIndex "0")) |
| ("MOTOR AC" |
| (FullPartName "MOTOR AC.Normal") |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\ELECTROMECHANICAL.OLB") |
| (DeviceIndex "0")) |
| (BAT-CELL |
| (FullPartName "BAT-CELL.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_REST.OLB") |
| (DeviceIndex "0")) |
| (D-SCHOTTKY |
| (FullPartName "D-SCHOTTKY.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (C |
| (FullPartName "C.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_RLC.OLB") |
| (DeviceIndex "0")) |
| (GND |
| (LibraryName "M:\ORCAD91\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_OPTO.OLB") |
| (DeviceIndex "0")) |
| (JUMP2 |
| (FullPartName "JUMP2.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\JUMP.OLB") |
| (DeviceIndex "0")) |
| (ALDKW-K |
| (FullPartName "ALDKW-K.Normal") |
| (LibraryName "C:\LIBRARY\KAKLIK\ORCAD9X\RUZNE.OLB") |
| (DeviceIndex "0")) |
| (D |
| (FullPartName "D.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\GEN_D.OLB") |
| (DeviceIndex "0")) |
| (DIP10_300 |
| (FullPartName "DIP10_300.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD9X\DECALES.OLB") |
| (DeviceIndex "0")) |
| (PBON |
| (FullPartName "PBON.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SWITCH.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\picuniversal\Univerzalni deska\solarni_robot.dsn") |
| (Path "Design Resources" |
| "D:\KAKLIK\schemata\picuniversal\Univerzalni deska\solarni_robot.dsn" |
| "SCHEMATIC1") |
| (Path "Outputs") |
| (Select "Design Resources" |
| "D:\KAKLIK\schemata\picuniversal\Univerzalni deska\solarni_robot.dsn" |
| "SCHEMATIC1" "PAGE1")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -30 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -30 66 756 87 414") |
| (Scroll "0 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path |
| "D:\KAKLIK\SCHEMATA\PICUNIVERSAL\UNIVERZALNI DESKA\SOLARNI_ROBOT.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1"))) |
| (LastUsedLibraryBrowseDirectory "C:\library\ORCAD9x")) |
| /schemata/picuniversal/solarni robot 2004/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/picuniversal/univerzalni_Desky-KAKLIK.doc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/prenos/laser/LASER_SEND.DBK |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/prenos/laser/LASER_SEND.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/prenos/laser/LASER_SEND1.DSN |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
| /schemata/prenos/laser/LASER_SEND1.opj |
|---|
| 0,0 → 1,73 |
| (ExpressProject "LASER_SEND-TX" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\laser_send-tx.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x") |
| (File ".\laser_send1.dsn" |
| (Type "Schematic Design"))) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (PORTBOTH-L |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (VCC |
| (LibraryName "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\CAPSYM.OLB") |
| (DeviceIndex "0")) |
| (0 |
| (LibraryName |
| "C:\PROGRAM FILES\ORCADLITE\CAPTURE\LIBRARY\PSPICE\SOURCE.OLB") |
| (DeviceIndex "0")) |
| (PAD |
| (FullPartName "PAD.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\SYMBOLS.OLB") |
| (DeviceIndex "0")) |
| (NPN-PHOTO |
| (FullPartName "NPN-PHOTO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-T.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-D.OLB") |
| (DeviceIndex "0")) |
| (R-POT |
| (FullPartName "R-POT.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (NPN-DARL |
| (FullPartName "NPN-DARL.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-T.OLB") |
| (DeviceIndex "0")) |
| (NPN |
| (FullPartName "NPN.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-T.OLB") |
| (DeviceIndex "0"))) |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 78 720 44 368") |
| (Scroll "0 0") |
| (Zoom "100") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\SEND\LASER_SEND1.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1"))) |
| (LastUsedLibraryBrowseDirectory "C:\library\OrCad91")) |
| /schemata/prenos/laser/laser_send.opj |
|---|
| 0,0 → 1,61 |
| (ExpressProject "laser_send" |
| (ProjectVersion "19981106") |
| (ProjectType "PCB") |
| (Folder "Design Resources" |
| (Folder "Library") |
| (NoModify) |
| (File ".\laser_send.dsn" |
| (Type "Schematic Design")) |
| (BuildFileAddedOrDeleted "x") |
| (CompileFileAddedOrDeleted "x")) |
| (Folder "Outputs") |
| (Folder "Referenced Projects") |
| (PartMRUSelector |
| (LM393 |
| (FullPartName "LM393.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCAD\CAPTURE\LIBRARY\OPAMP.OLB") |
| (DeviceIndex "0")) |
| (LM311 |
| (FullPartName "LM311.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCAD\CAPTURE\LIBRARY\OPAMP.OLB") |
| (DeviceIndex "0")) |
| (R |
| (FullPartName "R.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-RLC.OLB") |
| (DeviceIndex "0")) |
| (2N2102 |
| (FullPartName "2N2102.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCAD\CAPTURE\LIBRARY\TRANSISTOR.OLB") |
| (DeviceIndex "0")) |
| (COAX |
| (FullPartName "COAX.Normal") |
| (LibraryName "C:\PROGRAM FILES\ORCAD\CAPTURE\LIBRARY\CONNECTOR.OLB") |
| (DeviceIndex "0")) |
| (NPN-PHOTO |
| (FullPartName "NPN-PHOTO.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-T.OLB") |
| (DeviceIndex "0")) |
| (LED |
| (FullPartName "LED.Normal") |
| (LibraryName "C:\LIBRARY\ORCAD91\DEV-D.OLB") |
| (DeviceIndex "0"))) |
| (LastUsedLibraryBrowseDirectory "C:\Program Files\OrCAD\CAPTURE\LIBRARY") |
| (GlobalState |
| (FileView |
| (Path "Design Resources")) |
| (HierarchyView) |
| (Doc |
| (Type "COrCapturePMDoc") |
| (Frame |
| (Placement "44 0 1 -1 -1 -4 -23 0 200 0 301")) |
| (Tab 0)) |
| (Doc |
| (Type "COrSchematicDoc") |
| (Frame |
| (Placement "44 2 3 -1 -1 -4 -23 44 686 44 368") |
| (Scroll "115 0") |
| (Zoom "124") |
| (Occurrence "/")) |
| (Path "D:\@KAKLIK\SCHEMATA\SEND\LASER_SEND.DSN") |
| (Schematic "SCHEMATIC1") |
| (Page "PAGE1")))) |
| /schemata/prenos/laser/vssver.scc |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| +application/octet-stream |
| \ No newline at end of property |
