Subversion Repositories svnkaklik

Rev

Rev 199 | Show entire file | Ignore whitespace | Details | Blame | Last modification | View Log

Rev 199 Rev 251
Line 1... Line 1...
1 
#include ".\camerus.h"
 1 
#include ".\camerus.h"
2 
 
 2 
 
- 
 
 3 
#define  CAMERA_ADR   0xC0
- 
 
 4 
 
3 
 
 5 
 
4 
void main()
 6 
void main()
5 
{
 7 
{
6 
   setup_adc_ports(NO_ANALOGS);
 8 
   setup_adc_ports(NO_ANALOGS);
7 
   setup_adc(ADC_OFF);
 9 
   setup_adc(ADC_OFF);
Line 10... Line 12...
10 
   setup_timer_2(T2_DISABLED,0,1);
 12 
   setup_timer_2(T2_DISABLED,0,1);
11 
 
 13 
 
12 
   output_high(PIN_C0);
 14 
   output_high(PIN_C0);
13 
   output_low(PIN_C6);
 15 
   output_low(PIN_C6);
14 
 
 16 
 
- 
 
 17 
   Delay_ms(200);
- 
 
 18 
   output_low(PIN_C0);
- 
 
 19 
   Delay_ms(200);
- 
 
 20 
   output_high(PIN_C0);
- 
 
 21 
 
15 
   i2c_start();      // Reset
 22 
   i2c_start();      // Reset
16 
   i2c_write(0xC0);
 23 
   i2c_write(CAMERA_ADR);
17 
   i2c_write(0x12);
 24 
   i2c_write(0x12);
18 
   i2c_write(0x80 | 0x24);
 25 
   i2c_write(0x80 | 0x24);
19 
   i2c_stop();
 26 
   i2c_stop();
20 
 
 27 
 
21 
// **** Write data => Adr($13) = 0x05 ****
 28 
// **** Write data => Adr($13) = 0x05 ****
22 
// This will tri-state the Y and UV busses on the OV6620, which
 29 
// This will tri-state the Y and UV busses on the OV6620, which
23 
// will allow re-programming of the mega8 to proceed at startup
 30 
// will allow re-programming of the atmega8 to proceed at startup
24 
// if needed.
 31 
// if needed.
25 
 
 32 
 
26 
   i2c_start();
33 
   i2c_start();
27 
   i2c_write(0xC0);
 34 
   i2c_write(CAMERA_ADR);
28 
   i2c_write(0x13);
 35 
   i2c_write(0x13);
29 
   i2c_write(0x05);
 36 
   i2c_write(0x05);
30 
   i2c_stop();
 37 
   i2c_stop();
31
38 
 
32 
   Delay_ms(250);
 39 
   Delay_ms(250);
33 
 
 40 
 
34 
//**** Write data => Adr($3F) = 0x42 ****
 41 
//**** Write data => Adr($3F) = 0x42 ****
35 
// This will turn on the external clock for the mega8 to use.
 42 
// This will turn on the external clock for the atmega8 to use.
36 
 
 43 
 
37 
   i2c_start();
44 
   i2c_start();
38 
   i2c_write(0xC0);
 45 
   i2c_write(CAMERA_ADR);
39 
   i2c_write(0x3F);
 46 
   i2c_write(0x3F);
40 
   i2c_write(0x42);
 47 
   i2c_write(0x42);
41 
   i2c_stop();
 48 
   i2c_stop();
42
49 
 
43 
// Wait for a short amount of time for the external clock
 50 
// Wait for a short amount of time for the external clock
44 
// to stabilize
51 
// to stabilize
45 
 
 52 
 
46 
   Delay_ms(250);
 53 
   Delay_ms(250);
47 
 
 54 
 
48 
 
 55 
 
49 
   output_low(PIN_C0);
 56 
   output_low(PIN_C0);
50
57 
 
51 
// turn on the mega8 by releasing the reset line
 58 
// turn on the mega8 by releasing the reset line
52 
   output_high(PIN_C6);
 59 
   output_high(PIN_C6);
53 
 
 60 
 
54 
   while(true);
 61 
   while(true);
55 
}
 62 
}