Subversion Repositories svnkaklik

# makefile, written by kaklik
MCU=atmega8
CC=avr-gcc
OBJCOPY=avr-objcopy
# optimize for size:
CFLAGS=-g -mmcu=$(MCU) -Wall -Wstrict-prototypes -Os -mcall-prologues
#-------------------
all: blik.hex
#-------------------
help: 
        @echo "Usage: make all|load|load_pre|rdfuses|wrfuse1mhz|wrfuse4mhz|wrfusecrystal"
        @echo "Warning: you will not be able to undo wrfusecrystal unless you connect an"
        @echo "         external crystal! uC is dead after wrfusecrystal if you do not"
        @echo "         have an external crystal."
#-------------------
blik.hex : blik.out 
        $(OBJCOPY) -R .eeprom -O ihex blik.out blik.hex 
blik.out : blik.o 
        $(CC) $(CFLAGS) -o blik.out -Wl,-Map,blik.map blik.o 
blik.o : blik.c 
        $(CC) $(CFLAGS) -Os -c blik.c
#------------------
load: $(FILE).hex
        ./prg_load_uc $(FILE).hex
# here is a pre-compiled version in case you have trouble with
# your development environment
load_pre: $(FILE).hex
        ./prg_load_uc $(FILE)_pre.hex
#
loaduisp: $(FILE).hex
        ./prg_load_uc -u $(FILE).hex
# here is a pre-compiled version in case you have trouble with
# your development environment
load_preuisp: $(FILE)_pre.hex
        ./prg_load_uc -u avrm8ledtest.hex
#-------------------
# fuse byte settings:
#  Atmel AVR ATmega8 
#  Fuse Low Byte      = 0xe1 (1MHz internal), 0xe3 (4MHz internal), 0xe4 (8MHz internal)
#  Fuse High Byte     = 0xd9 
#  Factory default is 0xe1 for low byte and 0xd9 for high byte
# Check this with make rdfuses
rdfuses:
        ./prg_fusebit_uc -r
# use internal RC oscillator 1 Mhz
wrfuse1mhz:
        ./prg_fusebit_uc -w 1
# use internal RC oscillator 4 Mhz
wrfuse4mhz:
        ./prg_fusebit_uc -w 4
# use external 3-8 Mhz crystal
# Warning: you can not reset this to intenal unless you connect a crystal!!
wrfusecrystal:
        @echo "Warning: The external crystal setting can not be changed back without a working crystal"
        @echo "         You have 3 seconds to abort this with crtl-c"
        @sleep 3
        ./prg_fusebit_uc -w 0
#-------------------
clean:
        rm -f *.o *.map *.out *.hex
#-------------------