library

/*****************************************************************************
 *  Module for Microchip Graphics Library
 *  Himax HX8238 TCON driver
 *****************************************************************************
 * FileName:        TCON_HX8238.c
 * Dependencies:    Graphics.h
 * Processor:       PIC24, PIC32
 * Compiler:            MPLAB C30, MPLAB C32
 * Linker:          MPLAB LINK30, MPLAB LINK32
 * Company:         Microchip Technology Incorporated
 *
 * Software License Agreement
 *
 * Copyright © 2008 Microchip Technology Inc.  All rights reserved.
 * Microchip licenses to you the right to use, modify, copy and distribute
 * Software only when embedded on a Microchip microcontroller or digital
 * signal controller, which is integrated into your product or third party
 * product (pursuant to the sublicense terms in the accompanying license
 * agreement).  
 *
 * You should refer to the license agreement accompanying this Software
 * for additional information regarding your rights and obligations.
 *
 * SOFTWARE AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY
 * KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY
 * OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR
 * PURPOSE. IN NO EVENT SHALL MICROCHIP OR ITS LICENSORS BE LIABLE OR
 * OBLIGATED UNDER CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION,
 * BREACH OF WARRANTY, OR OTHER LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT
 * DAMAGES OR EXPENSES INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL,
 * INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA,
 * COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY
 * CLAIMS BY THIRD PARTIES (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF),
 * OR OTHER SIMILAR COSTS.
 *
 * Author               Date        Comment
 *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 * Anton Alkhimenok     11/17/08
 *****************************************************************************/
#include "Graphics\Graphics.h"

#define CS  0x01
#define SCL 0x02
#define SDO 0x04

BYTE    value;

/* */

void TCON_Delay(void)
{
    WORD    timeOut;
    timeOut = 200;
    while(timeOut--);
}

/* */
void TCON_CTRL(BYTE mask, BYTE level)
{
    if(level == 0)
    {
        value &= ~mask;
    }
    else
    {
        value |= mask;
    }

    SetReg(0xAC, value);
}

/* */
void TCONWriteByte(BYTE value)
{
    BYTE    mask;

    mask = 0x80;
    while(mask)
    {
        TCON_CTRL(SCL, 0);
        TCON_Delay();
        if(mask & value)
        {
            TCON_CTRL(SDO, 1);
        }
        else
        {
            TCON_CTRL(SDO, 0);
        }

        TCON_CTRL(SCL, 1);
        mask >>= 1;
    }
}

/* */
void GPIO_TCON(WORD index, WORD value)
{
    TCON_CTRL(CS, 0);

    // Index
    TCONWriteByte(0x70);
    TCONWriteByte(((WORD_VAL) index).v[1]);
    TCONWriteByte(((WORD_VAL) index).v[0]);

    TCON_CTRL(CS, 1);
    TCON_Delay();
    TCON_CTRL(CS, 0);

    // Data
    TCONWriteByte(0x72);
    TCONWriteByte(((WORD_VAL) value).v[1]);
    TCONWriteByte(((WORD_VAL) value).v[0]);
    TCON_CTRL(CS, 1);
    TCON_Delay();
}

/* */
void TCON_Init(void)
{
    SetReg(0xA8, CS | SDO | SCL);
    TCON_CTRL(CS, 1);
    TCON_CTRL(SDO, 1);
    TCON_CTRL(SCL, 1);

    DelayMs(20);

    GPIO_TCON(0x0001, 0x6300);  //Driver Output Control
    GPIO_TCON(0x0002, 0x0200);  //LCD-Driving-Waveform Control:N-line inversion,N=0
    GPIO_TCON(0x0003, 0x7184);  //Power control 1:Set the step-up cycle of the step-up circuit for 262k-color mode
    DelayMs(100);
    GPIO_TCON(0x0004, 0x0447);  //Input Data and Color Filter Control
    GPIO_TCON(0x0005, 0xb854);  //Function Control
    GPIO_TCON(0X000a, 0x4008);  //Contrast/Brightness Control

    //    GPIO_TCON(0X000a,0xff18);//Contrast/Brightness Control
    DelayMs(40);
    GPIO_TCON(0x000b, 0xd400);  //Frame Cycle Control
    GPIO_TCON(0x000d, 0x123a);  //Power Control 2
    DelayMs(200);
    GPIO_TCON(0x000e, 0x3000);  //Power Control 3
    DelayMs(200);
    GPIO_TCON(0x000f, 0x0000);  //Gate Scan Position
    GPIO_TCON(0x0016, 0x9f80);  //Horizontal Porch
    GPIO_TCON(0x0017, 0x2212);  //Vertical Porch
    DelayMs(200);
    GPIO_TCON(0x001e, 0x00ef);  //Set the VCOMH voltage
    DelayMs(200);

    GPIO_TCON(0x0030, 0x0507);  //Gamma Control
    GPIO_TCON(0x0031, 0x0004);  //Gamma Control
    GPIO_TCON(0x0032, 0x0707);  //Gamma Control
    GPIO_TCON(0x0033, 0x0000);  //Gamma Control
    GPIO_TCON(0x0034, 0x0000);  //Gamma Control
    GPIO_TCON(0x0035, 0x0307);  //Gamma Control
    GPIO_TCON(0x0036, 0x0700);  //Gamma Control
    GPIO_TCON(0x0037, 0x0000);  //Gamma Control
    GPIO_TCON(0x003a, 0x140b);  //Gamma Control
    GPIO_TCON(0x003b, 0x140b);  //Gamma Control
}