Generated by EAGLE CAM Processor 5.11.0

Photoplotter Info File: /home/kaklik/MLAB_E/Modules/PowerSupply/HVPS01A/SCH&PCB/V1.gpi

 Date              : 17.10.11 22:50
 Plotfile          : /home/kaklik/MLAB_E/Modules/PowerSupply/HVPS01A/SCH&PCB/V1.PHO
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Emulate Thermal   : no
 Emulate Annulus   : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      rectangle 0.3652inch x 0.1295inch     2
 D11      draw      0.0040inch              57
 D12      draw      0.0060inch              90
 D13      rectangle 0.0350inch x 0.0120inch    16
 D14      rectangle 0.0650inch x 0.1120inch     1
 D15      rectangle 0.1000inch x 0.0500inch     2
 D16      rectangle 0.0630inch x 0.0709inch     2
 D17      rectangle 0.0669inch x 0.0709inch     4
 D18      rectangle 0.0512inch x 0.0591inch    16
 D19      rectangle 0.0709inch x 0.1063inch     8
 D20      rectangle 0.1063inch x 0.0709inch     2
 D21      rectangle 0.0591inch x 0.0512inch    10
 D22      octagon   0.0700inch               3
 D23      rectangle 0.0461inch x 0.0740inch    10
 D24      round     0.0760inch               4
 D25      square    0.0650inch              13
 D26      rectangle 0.0630inch x 0.0710inch     4
 D27      square    0.0945inch               2
 D28      square    0.0768inch               8
 D29      round     0.2540inch               4
 D30      draw      0.0120inch             107
 D31      draw      0.0240inch            1586
 D32      draw      0.0160inch             563
 D33      draw      0.0320inch               2
 D34      draw      0.0400inch              29