/*! \file uartsw2.c \brief Interrupt-driven Software UART Driver. */
//*****************************************************************************
//
// File Name : 'uartsw2.c'
// Title : Interrupt-driven Software UART Driver
// Author : Pascal Stang - Copyright (C) 2002-2004
// Created : 7/20/2002
// Revised : 4/27/2004
// Version : 0.6
// Target MCU : Atmel AVR Series (intended for the ATmega16 and ATmega32)
// Editor Tabs : 4
//
// This code is distributed under the GNU Public License
// which can be found at http://www.gnu.org/licenses/gpl.txt
//
//*****************************************************************************
#include <avr/io.h>
#include <avr/interrupt.h>
#include "global.h"
#include "timer128.h"
#include "uartsw128.h"
// Program ROM constants
// Global variables
// uartsw transmit status and data variables
static volatile u08 UartswTxBusy;
static volatile u08 UartswTxData;
static volatile u08 UartswTxBitNum;
// baud rate common to transmit and receive
static volatile u08 UartswBaudRateDiv;
// uartsw receive status and data variables
static volatile u08 UartswRxBusy;
static volatile u08 UartswRxData;
static volatile u08 UartswRxBitNum;
// receive buffer
static cBuffer uartswRxBuffer; ///< uartsw receive buffer
// automatically allocate space in ram for each buffer
static char uartswRxData[UARTSW_RX_BUFFER_SIZE];
// functions
//! enable and initialize the software uart
void uartswInit(void)
{
// initialize the buffers
uartswInitBuffers();
// initialize the ports
sbi(UARTSW_TX_DDR, UARTSW_TX_PIN);
cbi(UARTSW_RX_DDR, UARTSW_RX_PIN);
cbi(UARTSW_RX_PORT, UARTSW_RX_PIN);
// initialize baud rate
uartswSetBaudRate(9600);
// setup the transmitter
UartswTxBusy = FALSE;
// disable OC2 interrupt
cbi(TIMSK, OCIE2);
// attach TxBit service routine to OC2
timerAttach(TIMER2OUTCOMPARE_INT, uartswTxBitService);
// setup the receiver
UartswRxBusy = FALSE;
// disable OC0 interrupt
cbi(TIMSK, OCIE0);
// attach RxBit service routine to OC0
timerAttach(TIMER0OUTCOMPARE_INT, uartswRxBitService);
// INT2 trigger on rising edge
sbi(EICRA, ISC20);
// enable INT2 interrupt
sbi(EIMSK, INT2);
// turn on interrupts
sei();
}
//! create and initialize the uart buffers
void uartswInitBuffers(void)
{
// initialize the UART receive buffer
bufferInit(&uartswRxBuffer, uartswRxData, UARTSW_RX_BUFFER_SIZE);
}
//! turns off software UART
void uartswOff(void)
{
// disable interrupts
cbi(TIMSK, OCIE2);
cbi(TIMSK, OCIE0);
cbi(EIMSK, INT2);
// detach the service routines
timerDetach(TIMER2OUTCOMPARE_INT);
timerDetach(TIMER0OUTCOMPARE_INT);
}
void uartswSetBaudRate(u32 baudrate)
{
u16 div;
// set timer prescaler
if( baudrate > (F_CPU/64L*256L) )
//CHANGE THE ABOVE LINE IF CLOCK FREQ OF AVRLINX BOARD DIFFERS
//FROM AVRSAT
{
// if the requested baud rate is high,
// set timer prescalers to div-by-64
timer2SetPrescaler(TIMERRTC_CLK_DIV64);
timer0SetPrescaler(TIMER_CLK_DIV64);
div = 64;
}
else
{
// if the requested baud rate is low,
// set timer prescalers to div-by-256
timer2SetPrescaler(TIMERRTC_CLK_DIV256);
timer0SetPrescaler(TIMER_CLK_DIV256);
div = 256;
}
// calculate division factor for requested baud rate, and set it
//UartswBaudRateDiv = (u08)(((F_CPU/64L)+(baudrate/2L))/(baudrate*1L));
//UartswBaudRateDiv = (u08)(((F_CPU/256L)+(baudrate/2L))/(baudrate*1L));
UartswBaudRateDiv = (u08)(((F_CPU/div)+(baudrate/2L))/(baudrate*1L));
}
//! returns the receive buffer structure
cBuffer* uartswGetRxBuffer(void)
{
// return rx buffer pointer
return &uartswRxBuffer;
}
void uartswSendByte(u08 data)
{
// wait until uart is ready
while(UartswTxBusy);
// set busy flag
UartswTxBusy = TRUE;
// save data
UartswTxData = data;
// set number of bits (+1 for stop bit)
UartswTxBitNum = 9;
// set the start bit
cbi(UARTSW_TX_PORT, UARTSW_TX_PIN);//changed to cbi -JGM
// schedule the next bit
outb(OCR2, inb(TCNT2) + UartswBaudRateDiv);
// enable OC2 interrupt
sbi(TIMSK, OCIE2);
}
//! gets a byte (if available) from the uart receive buffer
u08 uartswReceiveByte(u08* rxData)
{
// make sure we have a receive buffer
if(uartswRxBuffer.size)
{
// make sure we have data
if(uartswRxBuffer.datalength)
{
// get byte from beginning of buffer
*rxData = bufferGetFromFront(&uartswRxBuffer);
return TRUE;
}
else
{
// no data
return FALSE;
}
}
else
{
// no buffer
return FALSE;
}
}
void uartswTxBitService(void)
{
if(UartswTxBitNum)
{
// there are bits still waiting to be transmitted
if(UartswTxBitNum > 1)
{
// transmit data bits (inverted, LSB first)
if( !(UartswTxData & 0x01) )
cbi(UARTSW_TX_PORT, UARTSW_TX_PIN);//changed to cbi -JGM
else
sbi(UARTSW_TX_PORT, UARTSW_TX_PIN);//changed to sbi -JGM
// shift bits down
UartswTxData = UartswTxData>>1;
}
else
{
// transmit stop bit
sbi(UARTSW_TX_PORT, UARTSW_TX_PIN);//changed to sbi -JGM
}
// schedule the next bit
outb(OCR2, inb(OCR2) + UartswBaudRateDiv); //WHAT IS INB?
// count down
UartswTxBitNum--;
}
else
{
// transmission is done
// clear busy flag
UartswTxBusy = FALSE;
// disable OC2 interrupt
cbi(TIMSK, OCIE2);
}
}
void uartswRxBitService(void)
{
// this function runs on either:
// - a rising edge interrupt
// - Timer 0 output compare
if(!UartswRxBusy)
{
// UART was not previously busy,
// this must be is a start bit
// disable INT2 interrupt
cbi(EIMSK, INT2);
// schedule data bit sampling 1.5 bit periods from now
outb(OCR0, inb(TCNT0) + UartswBaudRateDiv + UartswBaudRateDiv/2);
// clear OC0 interrupt flag
sbi(TIFR, OCF0);
// enable OC0 interrupt
sbi(TIMSK, OCIE0);
// set busy flag
UartswRxBusy = TRUE;
// reset bit counter
UartswRxBitNum = 0;
// reset data
UartswRxData = 0;
}
else
{
// start bit has already been received
// we're in the data bits
// shift data byte to make room for new bit
UartswRxData = UartswRxData>>1;
// sample the data line
if((inb(UARTSW_RX_PORTIN) & (1<<UARTSW_RX_PIN)) ) //Removed ! condition -JGM
{
// serial line is low
// record '1' bit (data inverted)
UartswRxData |= 0x80;
}
// increment bit counter
UartswRxBitNum++;
// schedule next bit sample
outb(OCR0, inb(OCR0) + UartswBaudRateDiv);
// check if we have a full byte
if(UartswRxBitNum >= 8)
{
// save data in receive buffer
bufferAddToEnd(&uartswRxBuffer, UartswRxData);
// disable OC0 interrupt
cbi(TIMSK, OCIE0);
// clear INT2 interrupt flag
sbi(EIFR, INTF2);
// enable INT interrupt
sbi(EIMSK, INT2);
// clear busy flag
UartswRxBusy = FALSE;
}
}
}
SIGNAL(SIG_INTERRUPT2)
{
// run RxBit service routine
uartswRxBitService();
}
|