Subversion Repositories svnkaklik

Rev

Rev 409 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download


/****************************************************************************
 Title  :   C  include file for the I2C FUNCTIONS library (i2c.h)
 Author:    Chris efstathiou hendrix@otenet.gr
 Date:      13/Jul/2002
 Software:  AVR-GCC with AVR-AS
 Target:    any AVR device
 Comments:  This software is FREE.

*****************************************************************************/


#ifndef I2C_H
#define I2C_H   1

/*##############################################################################################*/
/*                             START OF CONFIGURATION BLOCK                                     */
/*##############################################################################################*/

#ifndef  F_CPU
#define  F_CPU            3686400L  /* The cpu clock frequency in Hertz (used to calculate time)*/
#endif

#define I2C_SDA_PORT      D         /* The SDA port. Use capital letter (A,B,C,D... etc.) */
#define SDA_PIN           4         /* The SDA port pin */

#define I2C_SCL_PORT      D         /* The SCL port. Use capital letter (A,B,C,D... etc.) */
#define SCL_PIN           5         /* The SCL port pin */
/*
   The I2C_DELAY_TIME normally is 5 microseconds for a 100 Khz I2C bus ( (1/100000)/2 ).
   but due to bus capacitance and device responce time in my application i use 50 microseconds.
   The I2C_TIMEOUT_TIME is set to whatever is the maximum time you think your device will take
   to perform the requested task. After that time the i2c_transmit function will return
   a "I2C_ERROR_DEVICE_NOT_RESPONDING" or "I2C_ERROR_DEVICE_BUSY" error code. 
*/ 
#define I2C_DELAY_TIME    50       /* in microseconds (max over 1 second) */
#define I2C_TIMEOUT_TIME  1000     /* in microseconds (max over 1 second) */

/*##############################################################################################*/
/*                              END OF CONFIGURATION BLOCK                                      */
/*##############################################################################################*/

/* Keyword definitions */

#define I2C_READ        1
#define I2C_WRITE       0

#define I2C_QUIT        0
#define I2C_CONTINUE    1

#define I2C_NO_ERROR                     0
#define I2C_ERROR_DEVICE_BUSY            1
#define I2C_ERROR_DEVICE_NOT_RESPONDING  2


/* Function Declaration */

extern  void          i2c_init(void);
extern  void          i2c_start(void);
extern  void          i2c_stop(void);
extern  unsigned char i2c_transmit(unsigned char data);
extern  unsigned char i2c_receive(unsigned char ack);



/* Macro definitions */

#define I2C_START(ADDRESS)     { i2c_start(); i2c_transmit(ADDRESS); }
#define I2C_START_TX(ADDRESS)  I2C_START(ADDRESS)
#define I2C_START_RX(ADDRESS)  I2C_START(ADDRESS | I2C_READ)

#endif  /*  #ifndef I2C_H */
/*######################################################################################################*/
/*                                         T H E   E N D                                                */
/*######################################################################################################*/