Rev 558 | Go to most recent revision | Blame | Last modification | View Log | Download
#! /bin/bash# Generated by configure.# Run this file to recreate the current configuration.# Compiler output produced by configure, useful for debugging# configure, is in config.log if it exists.debug=falseac_cs_recheck=falseac_cs_silent=falseSHELL=${CONFIG_SHELL-/bin/bash}## --------------------- #### M4sh Initialization. #### --------------------- ### Be more Bourne compatibleDUALCASE=1; export DUALCASE # for MKS shif test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; thenemulate shNULLCMD=:# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which# is contrary to our usage. Disable this feature.alias -g '${1+"$@"}'='"$@"'setopt NO_GLOB_SUBSTelsecase `(set -o) 2>/dev/null` in*posix*) set -o posix ;;esacfi# PATH needs CR# Avoid depending upon Character Ranges.as_cr_letters='abcdefghijklmnopqrstuvwxyz'as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'as_cr_Letters=$as_cr_letters$as_cr_LETTERSas_cr_digits='0123456789'as_cr_alnum=$as_cr_Letters$as_cr_digitsas_nl=''export as_nl# Printing a long string crashes Solaris 7 /usr/bin/printf.as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'as_echo=$as_echo$as_echo$as_echo$as_echo$as_echoas_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echoif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; thenas_echo='printf %s\n'as_echo_n='printf %s'elseif test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; thenas_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'as_echo_n='/usr/ucb/echo -n'elseas_echo_body='eval expr "X$1" : "X\\(.*\\)"'as_echo_n_body='evalarg=$1;case $arg in*"$as_nl"*)expr "X$arg" : "X\\(.*\\)$as_nl";arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;esac;expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"'export as_echo_n_bodyas_echo_n='sh -c $as_echo_n_body as_echo'fiexport as_echo_bodyas_echo='sh -c $as_echo_body as_echo'fi# The user is always right.if test "${PATH_SEPARATOR+set}" != set; thenPATH_SEPARATOR=:(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||PATH_SEPARATOR=';'}fi# Support unset when possible.if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; thenas_unset=unsetelseas_unset=falsefi# IFS# We need space, tab and new line, in precisely that order. Quoting is# there to prevent editors from complaining about space-tab.# (If _AS_PATH_WALK were called with IFS unset, it would disable word# splitting by setting IFS to empty value.)IFS=" "" $as_nl"# Find who we are. Look in the path if we contain no directory separator.case $0 in*[\\/]* ) as_myself=$0 ;;*) as_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdoIFS=$as_save_IFStest -z "$as_dir" && as_dir=.test -r "$as_dir/$0" && as_myself=$as_dir/$0 && breakdoneIFS=$as_save_IFS;;esac# We did not find ourselves, most probably we were run as `sh COMMAND'# in which case we are not to be found in the path.if test "x$as_myself" = x; thenas_myself=$0fiif test ! -f "$as_myself"; then$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2{ (exit 1); exit 1; }fi# Work around bugs in pre-3.0 UWIN ksh.for as_var in ENV MAIL MAILPATHdo ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_vardonePS1='$ 'PS2='> 'PS4='+ '# NLS nuisances.LC_ALL=Cexport LC_ALLLANGUAGE=Cexport LANGUAGE# Required to use basename.if expr a : '\(a\)' >/dev/null 2>&1 &&test "X`expr 00001 : '.*\(...\)'`" = X001; thenas_expr=exprelseas_expr=falsefiif (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; thenas_basename=basenameelseas_basename=falsefi# Name of the executable.as_me=`$as_basename -- "$0" ||$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \X"$0" : 'X\(//\)$' \| \X"$0" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X/"$0" |sed '/^.*\/\([^/][^/]*\)\/*$/{s//\1/q}/^X\/\(\/\/\)$/{s//\1/q}/^X\/\(\/\).*/{s//\1/q}s/.*/./; q'`# CDPATH.$as_unset CDPATHas_lineno_1=$LINENOas_lineno_2=$LINENOtest "x$as_lineno_1" != "x$as_lineno_2" &&test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {# Create $as_me.lineno as a copy of $as_myself, but with $LINENO# uniformly replaced by the line number. The first 'sed' inserts a# line-number line after each line using $LINENO; the second 'sed'# does the real work. The second script uses 'N' to pair each# line-number line with the line containing $LINENO, and appends# trailing '-' during substitution so that $LINENO is not a special# case at line end.# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the# scripts with optimization help from Paolo Bonzini. Blame Lee# E. McMahon (1931-1989) for sed's syntax. :-)sed -n 'p/[$]LINENO/=' <$as_myself |sed 's/[$]LINENO.*/&-/t linenob:linenoN:loops/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/t loops/-\n.*//' >$as_me.lineno &&chmod +x "$as_me.lineno" ||{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2{ (exit 1); exit 1; }; }# Don't try to exec as it changes $[0], causing all sort of problems# (the dirname of $[0] is not the place where we might find the# original and so on. Autoconf is especially sensitive to this).. "./$as_me.lineno"# Exit status is that of the last command.exit}if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; thenas_dirname=dirnameelseas_dirname=falsefiECHO_C= ECHO_N= ECHO_T=case `echo -n x` in-n*)case `echo 'x\c'` in*c*) ECHO_T=' ';; # ECHO_T is single tab character.*) ECHO_C='\c';;esac;;*)ECHO_N='-n';;esacif expr a : '\(a\)' >/dev/null 2>&1 &&test "X`expr 00001 : '.*\(...\)'`" = X001; thenas_expr=exprelseas_expr=falsefirm -f conf$$ conf$$.exe conf$$.fileif test -d conf$$.dir; thenrm -f conf$$.dir/conf$$.fileelserm -f conf$$.dirmkdir conf$$.dir 2>/dev/nullfiif (echo >conf$$.file) 2>/dev/null; thenif ln -s conf$$.file conf$$ 2>/dev/null; thenas_ln_s='ln -s'# ... but there are two gotchas:# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.# In both cases, we have to default to `cp -p'.ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||as_ln_s='cp -p'elif ln conf$$.file conf$$ 2>/dev/null; thenas_ln_s=lnelseas_ln_s='cp -p'fielseas_ln_s='cp -p'firm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.filermdir conf$$.dir 2>/dev/nullif mkdir -p . 2>/dev/null; thenas_mkdir_p=:elsetest -d ./-p && rmdir ./-pas_mkdir_p=falsefiif test -x / >/dev/null 2>&1; thenas_test_x='test -x'elseif ls -dL / >/dev/null 2>&1; thenas_ls_L_option=Lelseas_ls_L_option=fias_test_x='eval sh -c '\''if test -d "$1"; thentest -d "$1/.";elsecase $1 in-*)set "./$1";;esac;case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in???[sx]*):;;*)false;;esac;fi'\'' sh'fias_executable_p=$as_test_x# Sed expression to map a string onto a valid CPP name.as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"# Sed expression to map a string onto a valid variable name.as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"exec 6>&1# Save the log message, to keep $[0] and so on meaningful, and to# report actual input values of CONFIG_FILES etc. instead of their# values after options handling.ac_log="This file was extended by $as_me, which wasgenerated by GNU Autoconf 2.63. Invocation command line wasCONFIG_FILES = $CONFIG_FILESCONFIG_HEADERS = $CONFIG_HEADERSCONFIG_LINKS = $CONFIG_LINKSCONFIG_COMMANDS = $CONFIG_COMMANDS$ $0 $@on `(hostname || uname -n) 2>/dev/null | sed 1q`"# Files that config.status was made for.config_files=" Makefile src/Makefile"config_headers=" config.h"config_commands=" depfiles libtool"ac_cs_usage="\\`$as_me' instantiates files from templates according to thecurrent configuration.Usage: $0 [OPTION]... [FILE]...-h, --help print this help, then exit-V, --version print version number and configuration settings, then exit-q, --quiet, --silentdo not print progress messages-d, --debug don't remove temporary files--recheck update $as_me by reconfiguring in the same conditions--file=FILE[:TEMPLATE]instantiate the configuration file FILE--header=FILE[:TEMPLATE]instantiate the configuration header FILEConfiguration files:$config_filesConfiguration headers:$config_headersConfiguration commands:$config_commandsReport bugs to <bug-autoconf@gnu.org>."ac_cs_version="\config.statusconfigured by /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/configure, generated by GNU Autoconf 2.63,with options \"'LDFLAGS=-lasound -lfftw3'\"Copyright (C) 2008 Free Software Foundation, Inc.This config.status script is free software; the Free Software Foundationgives unlimited permission to copy, distribute and modify it."ac_pwd='/home/kaklik/projects/programy/C/ix86/echo/SW/sonar'srcdir='.'INSTALL='/usr/bin/install -c'MKDIR_P='/bin/mkdir -p'AWK='gawk'test -n "$AWK" || AWK=awk# The default lists apply if the user does not specify any file.ac_need_defaults=:while test $# != 0docase $1 in--*=*)ac_option=`expr "X$1" : 'X\([^=]*\)='`ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`ac_shift=:;;*)ac_option=$1ac_optarg=$2ac_shift=shift;;esaccase $ac_option in# Handling of the options.-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)ac_cs_recheck=: ;;--version | --versio | --versi | --vers | --ver | --ve | --v | -V )$as_echo "$ac_cs_version"; exit ;;--debug | --debu | --deb | --de | --d | -d )debug=: ;;--file | --fil | --fi | --f )$ac_shiftcase $ac_optarg in*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;esacCONFIG_FILES="$CONFIG_FILES '$ac_optarg'"ac_need_defaults=false;;--header | --heade | --head | --hea )$ac_shiftcase $ac_optarg in*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;esacCONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"ac_need_defaults=false;;--he | --h)# Conflict between --help and --header{ $as_echo "$as_me: error: ambiguous option: $1Try \`$0 --help' for more information." >&2{ (exit 1); exit 1; }; };;--help | --hel | -h )$as_echo "$ac_cs_usage"; exit ;;-q | -quiet | --quiet | --quie | --qui | --qu | --q \| -silent | --silent | --silen | --sile | --sil | --si | --s)ac_cs_silent=: ;;# This is an error.-*) { $as_echo "$as_me: error: unrecognized option: $1Try \`$0 --help' for more information." >&2{ (exit 1); exit 1; }; } ;;*) ac_config_targets="$ac_config_targets $1"ac_need_defaults=false ;;esacshiftdoneac_configure_extra_args=if $ac_cs_silent; thenexec 6>/dev/nullac_configure_extra_args="$ac_configure_extra_args --silent"fiif $ac_cs_recheck; thenset X '/bin/bash' '/home/kaklik/projects/programy/C/ix86/echo/SW/sonar/configure' 'LDFLAGS=-lasound -lfftw3' $ac_configure_extra_args --no-create --no-recursionshift$as_echo "running CONFIG_SHELL=/bin/bash $*" >&6CONFIG_SHELL='/bin/bash'export CONFIG_SHELLexec "$@"fiexec 5>>config.log{echosed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX## Running $as_me. ##_ASBOX$as_echo "$ac_log"} >&5## INIT-COMMANDS#AMDEP_TRUE="" ac_aux_dir="."# The HP-UX ksh and POSIX shell print the target directory to stdout# if CDPATH is set.(unset CDPATH) >/dev/null 2>&1 && unset CDPATHsed_quote_subst='s/\(["`$\\]\)/\\\1/g'double_quote_subst='s/\(["`\\]\)/\\\1/g'delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'macro_version='2.2.6'macro_revision='1.3012'enable_shared='yes'enable_static='yes'pic_mode='default'enable_fast_install='yes'host_alias=''host='x86_64-unknown-linux-gnu'host_os='linux-gnu'build_alias=''build='x86_64-unknown-linux-gnu'build_os='linux-gnu'SED='/bin/sed'Xsed='/bin/sed -e 1s/^X//'GREP='/bin/grep'EGREP='/bin/grep -E'FGREP='/bin/grep -F'LD='/usr/bin/ld -m elf_x86_64'NM='/usr/bin/nm -B'LN_S='ln -s'max_cmd_len='1572864'ac_objext='o'exeext=''lt_unset='unset'lt_SP2NL='tr \040 \012'lt_NL2SP='tr \015\012 \040\040'reload_flag=' -r'reload_cmds='$LD$reload_flag -o $output$reload_objs'OBJDUMP='objdump'deplibs_check_method='pass_all'file_magic_cmd='$MAGIC_CMD'AR='ar'AR_FLAGS='cru'STRIP='strip'RANLIB='ranlib'old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib'old_postuninstall_cmds=''old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib'CC='gcc'CFLAGS='-g -O2'compiler='gcc'GCC='yes'lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\'''lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\'''objdir='.libs'SHELL='/bin/bash'ECHO='echo'MAGIC_CMD='file'lt_prog_compiler_no_builtin_flag=' -fno-builtin'lt_prog_compiler_wl='-Wl,'lt_prog_compiler_pic=' -fPIC -DPIC'lt_prog_compiler_static='-static'lt_cv_prog_compiler_c_o='yes'need_locks='no'DSYMUTIL=''NMEDIT=''LIPO=''OTOOL=''OTOOL64=''libext='a'shrext_cmds='.so'extract_expsyms_cmds=''archive_cmds_need_lc='no'enable_shared_with_static_runtimes='no'export_dynamic_flag_spec='${wl}--export-dynamic'whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'compiler_needs_object='no'old_archive_from_new_cmds=''old_archive_from_expsyms_cmds=''archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~echo "local: *; };" >> $output_objdir/$libname.ver~$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'module_cmds=''module_expsym_cmds=''with_gnu_ld='yes'allow_undefined_flag=''no_undefined_flag=''hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'hardcode_libdir_flag_spec_ld=''hardcode_libdir_separator=''hardcode_direct='no'hardcode_direct_absolute='no'hardcode_minus_L='no'hardcode_shlibpath_var='unsupported'hardcode_automatic='no'inherit_rpath='no'link_all_deplibs='unknown'fix_srcfile_path=''always_export_symbols='no'export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'include_expsyms=''prelink_cmds=''file_list_spec=''variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH'need_lib_prefix='no'need_version='no'version_type='linux'runpath_var='LD_RUN_PATH'shlibpath_var='LD_LIBRARY_PATH'shlibpath_overrides_runpath='no'libname_spec='lib$name'library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'soname_spec='${libname}${release}${shared_ext}$major'postinstall_cmds=''postuninstall_cmds=''finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'finish_eval=''hardcode_into_libs='yes'sys_lib_search_path_spec='/usr/lib/gcc/x86_64-linux-gnu/4.3.3 /usr/lib /lib'sys_lib_dlsearch_path_spec='/lib /usr/lib /usr/lib32/alsa-lib /usr/lib/alsa-lib /usr/local/lib /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu 'hardcode_action='immediate'enable_dlopen='unknown'enable_dlopen_self='unknown'enable_dlopen_self_static='unknown'old_striplib='strip --strip-debug'striplib='strip --strip-unneeded'LTCC='gcc'LTCFLAGS='-g -O2'compiler='gcc'# Quote evaled strings.for var in SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib; docase `eval \\$ECHO "X\\$$var"` in*[\\\`\"\$]*)eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"";;*)eval "lt_$var=\\\"\$$var\\\"";;esacdone# Double-quote double-evaled strings.for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; docase `eval \\$ECHO "X\\$$var"` in*[\\\`\"\$]*)eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"";;*)eval "lt_$var=\\\"\$$var\\\"";;esacdone# Fix-up fallback echo if it was mangled by the above quoting rules.case $lt_ECHO in*'\$0 --fallback-echo"') lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`;;esacac_aux_dir='.'xsi_shell='yes'lt_shell_append='yes'# See if we are running on zsh, and set the options which allow our# commands through without removal of \ escapes INIT.if test -n "${ZSH_VERSION+set}" ; thensetopt NO_GLOB_SUBSTfiPACKAGE='sonar'VERSION='0.1'TIMESTAMP=''RM='rm -f'ofile='libtool'# Handling of arguments.for ac_config_target in $ac_config_targetsdocase $ac_config_target in"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;*) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}{ (exit 1); exit 1; }; };;esacdone# If the user did not use the arguments to specify the items to instantiate,# then the envvar interface is used. Set only those that are not.# We use the long form for the default assignment because of an extremely# bizarre bug on SunOS 4.1.3.if $ac_need_defaults; thentest "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_filestest "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headerstest "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commandsfi# Have a temporary directory for convenience. Make it in the build tree# simply because there is no reason against having it here, and in addition,# creating and moving files from /tmp can sometimes cause problems.# Hook for its removal unless debugging.# Note that there is a small window in which the directory will not be cleaned:# after its creation but before its name has been assigned to `$tmp'.$debug ||{tmp=trap 'exit_status=$?{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status' 0trap '{ (exit 1); exit 1; }' 1 2 13 15}# Create a (secure) tmp directory for tmp files.{tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&test -n "$tmp" && test -d "$tmp"} ||{tmp=./conf$$-$RANDOM(umask 077 && mkdir "$tmp")} ||{$as_echo "$as_me: cannot create a temporary directory in ." >&2{ (exit 1); exit 1; }}# Set up the scripts for CONFIG_FILES section.# No need to generate them if there are no CONFIG_FILES.# This happens for instance with `./config.status config.h'.if test -n "$CONFIG_FILES"; thenac_cr=' 'ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`if test "$ac_cs_awk_cr" = "a${ac_cr}b"; thenac_cs_awk_cr='\\r'elseac_cs_awk_cr=$ac_crfiecho 'BEGIN {' >"$tmp/subs1.awk" &&cat >>"$tmp/subs1.awk" <<\_ACAWK &&S["LTLIBOBJS"]=""S["LIBOBJS"]=""S["CPP"]="gcc -E"S["OTOOL64"]=""S["OTOOL"]=""S["LIPO"]=""S["NMEDIT"]=""S["DSYMUTIL"]=""S["lt_ECHO"]="echo"S["RANLIB"]="ranlib"S["AR"]="ar"S["OBJDUMP"]="objdump"S["LN_S"]="ln -s"S["NM"]="/usr/bin/nm -B"S["ac_ct_DUMPBIN"]=""S["DUMPBIN"]=""S["LD"]="/usr/bin/ld -m elf_x86_64"S["FGREP"]="/bin/grep -F"S["EGREP"]="/bin/grep -E"S["GREP"]="/bin/grep"S["SED"]="/bin/sed"S["host_os"]="linux-gnu"S["host_vendor"]="unknown"S["host_cpu"]="x86_64"S["host"]="x86_64-unknown-linux-gnu"S["build_os"]="linux-gnu"S["build_vendor"]="unknown"S["build_cpu"]="x86_64"S["build"]="x86_64-unknown-linux-gnu"S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool"S["am__fastdepCC_FALSE"]="#"S["am__fastdepCC_TRUE"]=""S["CCDEPMODE"]="depmode=gcc3"S["AMDEPBACKSLASH"]="\\"S["AMDEP_FALSE"]="#"S["AMDEP_TRUE"]=""S["am__quote"]=""S["am__include"]="include"S["DEPDIR"]=".deps"S["OBJEXT"]="o"S["EXEEXT"]=""S["ac_ct_CC"]="gcc"S["CPPFLAGS"]=""S["LDFLAGS"]="-lasound -lfftw3"S["CFLAGS"]="-g -O2"S["CC"]="gcc"S["am__untar"]="${AMTAR} xf -"S["am__tar"]="${AMTAR} chof - \"$$tardir\""S["AMTAR"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run tar"S["am__leading_dot"]="."S["SET_MAKE"]=""S["AWK"]="gawk"S["mkdir_p"]="/bin/mkdir -p"S["MKDIR_P"]="/bin/mkdir -p"S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s"S["STRIP"]="strip"S["install_sh"]="$(SHELL) /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/install-sh"S["MAKEINFO"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run makeinfo"S["AUTOHEADER"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run autoheader"S["AUTOMAKE"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run automake-1.10"S["AUTOCONF"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run autoconf"S["ACLOCAL"]="${SHELL} /home/kaklik/projects/programy/C/ix86/echo/SW/sonar/missing --run aclocal-1.10"S["VERSION"]="0.1"S["PACKAGE"]="sonar"S["CYGPATH_W"]="echo"S["am__isrc"]=""S["INSTALL_DATA"]="${INSTALL} -m 644"S["INSTALL_SCRIPT"]="${INSTALL}"S["INSTALL_PROGRAM"]="${INSTALL}"S["target_alias"]=""S["host_alias"]=""S["build_alias"]=""S["LIBS"]=""S["ECHO_T"]=""S["ECHO_N"]="-n"S["ECHO_C"]=""S["DEFS"]="-DHAVE_CONFIG_H"S["mandir"]="${datarootdir}/man"S["localedir"]="${datarootdir}/locale"S["libdir"]="${exec_prefix}/lib"S["psdir"]="${docdir}"S["pdfdir"]="${docdir}"S["dvidir"]="${docdir}"S["htmldir"]="${docdir}"S["infodir"]="${datarootdir}/info"S["docdir"]="${datarootdir}/doc/${PACKAGE}"S["oldincludedir"]="/usr/include"S["includedir"]="${prefix}/include"S["localstatedir"]="${prefix}/var"S["sharedstatedir"]="${prefix}/com"S["sysconfdir"]="${prefix}/etc"S["datadir"]="${datarootdir}"S["datarootdir"]="${prefix}/share"S["libexecdir"]="${exec_prefix}/libexec"S["sbindir"]="${exec_prefix}/sbin"S["bindir"]="${exec_prefix}/bin"S["program_transform_name"]="s,x,x,"S["prefix"]="/usr/local"S["exec_prefix"]="${prefix}"S["PACKAGE_BUGREPORT"]=""S["PACKAGE_STRING"]=""S["PACKAGE_VERSION"]=""S["PACKAGE_TARNAME"]=""S["PACKAGE_NAME"]=""S["PATH_SEPARATOR"]=":"S["SHELL"]="/bin/bash"_ACAWKcat >>"$tmp/subs1.awk" <<_ACAWK &&for (key in S) S_is_set[key] = 1FS = ""}{line = $ 0nfields = split(line, field, "@")substed = 0len = length(field[1])for (i = 2; i < nfields; i++) {key = field[i]keylen = length(key)if (S_is_set[key]) {value = S[key]line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)len += length(value) + length(field[++i])substed = 1} elselen += 1 + keylen}print line}_ACAWKif sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; thensed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"elsecatfi < "$tmp/subs1.awk" > "$tmp/subs.awk" \|| { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5$as_echo "$as_me: error: could not setup config files machinery" >&2;}{ (exit 1); exit 1; }; }fi # test -n "$CONFIG_FILES"# Set up the scripts for CONFIG_HEADERS section.# No need to generate them if there are no CONFIG_HEADERS.# This happens for instance with `./config.status Makefile'.if test -n "$CONFIG_HEADERS"; thencat >"$tmp/defines.awk" <<\_ACAWK ||BEGIN {D["PACKAGE_NAME"]=" \"\""D["PACKAGE_TARNAME"]=" \"\""D["PACKAGE_VERSION"]=" \"\""D["PACKAGE_STRING"]=" \"\""D["PACKAGE_BUGREPORT"]=" \"\""D["PACKAGE"]=" \"sonar\""D["VERSION"]=" \"0.1\""D["STDC_HEADERS"]=" 1"D["HAVE_SYS_TYPES_H"]=" 1"D["HAVE_SYS_STAT_H"]=" 1"D["HAVE_STDLIB_H"]=" 1"D["HAVE_STRING_H"]=" 1"D["HAVE_MEMORY_H"]=" 1"D["HAVE_STRINGS_H"]=" 1"D["HAVE_INTTYPES_H"]=" 1"D["HAVE_STDINT_H"]=" 1"D["HAVE_UNISTD_H"]=" 1"D["HAVE_DLFCN_H"]=" 1"D["LT_OBJDIR"]=" \".libs/\""for (key in D) D_is_set[key] = 1FS = ""}/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ {line = $ 0split(line, arg, " ")if (arg[1] == "#") {defundef = arg[2]mac1 = arg[3]} else {defundef = substr(arg[1], 2)mac1 = arg[2]}split(mac1, mac2, "(") #)macro = mac2[1]prefix = substr(line, 1, index(line, defundef) - 1)if (D_is_set[macro]) {# Preserve the white space surrounding the "#".print prefix "define", macro P[macro] D[macro]next} else {# Replace #undef with comments. This is necessary, for example,# in the case of _POSIX_SOURCE, which is predefined and required# on some systems where configure will not decide to define it.if (defundef == "undef") {print "/*", prefix defundef, macro, "*/"next}}}{ print }_ACAWK{ { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5$as_echo "$as_me: error: could not setup config headers machinery" >&2;}{ (exit 1); exit 1; }; }fi # test -n "$CONFIG_HEADERS"eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"shiftfor ac_tagdocase $ac_tag in:[FHLC]) ac_mode=$ac_tag; continue;;esaccase $ac_mode$ac_tag in:[FHL]*:*);;:L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}{ (exit 1); exit 1; }; };;:[FH]-) ac_tag=-:-;;:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;esacac_save_IFS=$IFSIFS=:set x $ac_tagIFS=$ac_save_IFSshiftac_file=$1shiftcase $ac_mode in:L) ac_source=$1;;:[FH])ac_file_inputs=for ac_fdocase $ac_f in-) ac_f="$tmp/stdin";;*) # Look for the file first in the build tree, then in the source tree# (if the path is not absolute). The absolute path cannot be DOS-style,# because $ac_f cannot contain `:'.test -f "$ac_f" ||case $ac_f in[\\/$]*) false;;*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;esac ||{ { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}{ (exit 1); exit 1; }; };;esaccase $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esacac_file_inputs="$ac_file_inputs '$ac_f'"done# Let's still pretend it is `configure' which instantiates (i.e., don't# use $as_me), people would be surprised to read:# /* config.h. Generated by config.status. */configure_input='Generated from '`$as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`' by configure.'if test x"$ac_file" != x-; thenconfigure_input="$ac_file. $configure_input"{ $as_echo "$as_me:$LINENO: creating $ac_file" >&5$as_echo "$as_me: creating $ac_file" >&6;}fi# Neutralize special characters interpreted by sed in replacement strings.case $configure_input in #(*\&* | *\|* | *\\* )ac_sed_conf_input=`$as_echo "$configure_input" |sed 's/[\\\\&|]/\\\\&/g'`;; #(*) ac_sed_conf_input=$configure_input;;esaccase $ac_tag in*:-:* | *:-) cat >"$tmp/stdin" \|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5$as_echo "$as_me: error: could not create $ac_file" >&2;}{ (exit 1); exit 1; }; } ;;esac;;esacac_dir=`$as_dirname -- "$ac_file" ||$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \X"$ac_file" : 'X\(//\)[^/]' \| \X"$ac_file" : 'X\(//\)$' \| \X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X"$ac_file" |sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{s//\1/q}/^X\(\/\/\)[^/].*/{s//\1/q}/^X\(\/\/\)$/{s//\1/q}/^X\(\/\).*/{s//\1/q}s/.*/./; q'`{ as_dir="$ac_dir"case $as_dir in #(-*) as_dir=./$as_dir;;esactest -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {as_dirs=while :; docase $as_dir in #(*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(*) as_qdir=$as_dir;;esacas_dirs="'$as_qdir' $as_dirs"as_dir=`$as_dirname -- "$as_dir" ||$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \X"$as_dir" : 'X\(//\)[^/]' \| \X"$as_dir" : 'X\(//\)$' \| \X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X"$as_dir" |sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{s//\1/q}/^X\(\/\/\)[^/].*/{s//\1/q}/^X\(\/\/\)$/{s//\1/q}/^X\(\/\).*/{s//\1/q}s/.*/./; q'`test -d "$as_dir" && breakdonetest -z "$as_dirs" || eval "mkdir $as_dirs"} || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}{ (exit 1); exit 1; }; }; }ac_builddir=.case "$ac_dir" in.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;*)ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`# A ".." for each directory in $ac_dir_suffix.ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`case $ac_top_builddir_sub in"") ac_top_builddir_sub=. ac_top_build_prefix= ;;*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;esac ;;esacac_abs_top_builddir=$ac_pwdac_abs_builddir=$ac_pwd$ac_dir_suffix# for backward compatibility:ac_top_builddir=$ac_top_build_prefixcase $srcdir in.) # We are building in place.ac_srcdir=.ac_top_srcdir=$ac_top_builddir_subac_abs_top_srcdir=$ac_pwd ;;[\\/]* | ?:[\\/]* ) # Absolute name.ac_srcdir=$srcdir$ac_dir_suffix;ac_top_srcdir=$srcdirac_abs_top_srcdir=$srcdir ;;*) # Relative name.ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffixac_top_srcdir=$ac_top_build_prefix$srcdirac_abs_top_srcdir=$ac_pwd/$srcdir ;;esacac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffixcase $ac_mode in:F)## CONFIG_FILE#case $INSTALL in[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;esacac_MKDIR_P=$MKDIR_Pcase $MKDIR_P in[\\/$]* | ?:[\\/]* ) ;;*/*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;esac# If the template does not know about datarootdir, expand it.# FIXME: This hack should be removed a few years after 2.60.ac_datarootdir_hack=; ac_datarootdir_seen=ac_sed_dataroot='/datarootdir/ {pq}/@datadir@/p/@docdir@/p/@infodir@/p/@localedir@/p/@mandir@/p'case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in*datarootdir*) ac_datarootdir_seen=yes;;*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*){ $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}ac_datarootdir_hack='s&@datadir@&${datarootdir}&gs&@docdir@&${datarootdir}/doc/${PACKAGE}&gs&@infodir@&${datarootdir}/info&gs&@localedir@&${datarootdir}/locale&gs&@mandir@&${datarootdir}/man&gs&\${datarootdir}&${prefix}/share&g' ;;esacac_sed_extra="/^[ ]*VPATH[ ]*=/{s/:*\$(srcdir):*/:/s/:*\${srcdir}:*/:/s/:*@srcdir@:*/:/s/^\([^=]*=[ ]*\):*/\1/s/:*$//s/^[^=]*=[ ]*$//}:t/@[a-zA-Z_][a-zA-Z_0-9]*@/!bs|@configure_input@|$ac_sed_conf_input|;t ts&@top_builddir@&$ac_top_builddir_sub&;t ts&@top_build_prefix@&$ac_top_build_prefix&;t ts&@srcdir@&$ac_srcdir&;t ts&@abs_srcdir@&$ac_abs_srcdir&;t ts&@top_srcdir@&$ac_top_srcdir&;t ts&@abs_top_srcdir@&$ac_abs_top_srcdir&;t ts&@builddir@&$ac_builddir&;t ts&@abs_builddir@&$ac_abs_builddir&;t ts&@abs_top_builddir@&$ac_abs_top_builddir&;t ts&@INSTALL@&$ac_INSTALL&;t ts&@MKDIR_P@&$ac_MKDIR_P&;t t$ac_datarootdir_hack"eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5$as_echo "$as_me: error: could not create $ac_file" >&2;}{ (exit 1); exit 1; }; }test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&{ $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'which seems to be undefined. Please make sure it is defined." >&5$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'which seems to be undefined. Please make sure it is defined." >&2;}rm -f "$tmp/stdin"case $ac_file in-) cat "$tmp/out" && rm -f "$tmp/out";;*) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;esac \|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5$as_echo "$as_me: error: could not create $ac_file" >&2;}{ (exit 1); exit 1; }; };;:H)## CONFIG_HEADER#if test x"$ac_file" != x-; then{$as_echo "/* $configure_input */" \&& eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"} >"$tmp/config.h" \|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5$as_echo "$as_me: error: could not create $ac_file" >&2;}{ (exit 1); exit 1; }; }if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then{ $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5$as_echo "$as_me: $ac_file is unchanged" >&6;}elserm -f "$ac_file"mv "$tmp/config.h" "$ac_file" \|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5$as_echo "$as_me: error: could not create $ac_file" >&2;}{ (exit 1); exit 1; }; }fielse$as_echo "/* $configure_input */" \&& eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \|| { { $as_echo "$as_me:$LINENO: error: could not create -" >&5$as_echo "$as_me: error: could not create -" >&2;}{ (exit 1); exit 1; }; }fi# Compute "$ac_file"'s index in $config_headers._am_arg="$ac_file"_am_stamp_count=1for _am_header in $config_headers :; docase $_am_header in$_am_arg | $_am_arg:* )break ;;* )_am_stamp_count=`expr $_am_stamp_count + 1` ;;esacdoneecho "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \X"$_am_arg" : 'X\(//\)[^/]' \| \X"$_am_arg" : 'X\(//\)$' \| \X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X"$_am_arg" |sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{s//\1/q}/^X\(\/\/\)[^/].*/{s//\1/q}/^X\(\/\/\)$/{s//\1/q}/^X\(\/\).*/{s//\1/q}s/.*/./; q'`/stamp-h$_am_stamp_count;;:C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5$as_echo "$as_me: executing $ac_file commands" >&6;};;esaccase $ac_file$ac_mode in"depfiles":C) test x"$AMDEP_TRUE" != x"" || {# Autoconf 2.62 quotes --file arguments for eval, but not when files# are listed without --file. Let's play safe and only enable the eval# if we detect the quoting.case $CONFIG_FILES in*\'*) eval set x "$CONFIG_FILES" ;;*) set x $CONFIG_FILES ;;esacshiftfor mfdo# Strip MF so we end up with the name of the file.mf=`echo "$mf" | sed -e 's/:.*$//'`# Check whether this is an Automake generated Makefile or not.# We used to match only the files named `Makefile.in', but# some people rename them; so instead we look at the file content.# Grep'ing the first line is not enough: some people post-process# each Makefile.in and add a new line on top of each file to say so.# Grep'ing the whole file is not good either: AIX grep has a line# limit of 2048, but all sed's we know have understand at least 4000.if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; thendirpart=`$as_dirname -- "$mf" ||$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \X"$mf" : 'X\(//\)[^/]' \| \X"$mf" : 'X\(//\)$' \| \X"$mf" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X"$mf" |sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{s//\1/q}/^X\(\/\/\)[^/].*/{s//\1/q}/^X\(\/\/\)$/{s//\1/q}/^X\(\/\).*/{s//\1/q}s/.*/./; q'`elsecontinuefi# Extract the definition of DEPDIR, am__include, and am__quote# from the Makefile without running `make'.DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`test -z "$DEPDIR" && continueam__include=`sed -n 's/^am__include = //p' < "$mf"`test -z "am__include" && continueam__quote=`sed -n 's/^am__quote = //p' < "$mf"`# When using ansi2knr, U may be empty or an underscore; expand itU=`sed -n 's/^U = //p' < "$mf"`# Find all dependency output files, they are included files with# $(DEPDIR) in their names. We invoke sed twice because it is the# simplest approach to changing $(DEPDIR) to its actual value in the# expansion.for file in `sed -n "s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do# Make sure the directory exists.test -f "$dirpart/$file" && continuefdir=`$as_dirname -- "$file" ||$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \X"$file" : 'X\(//\)[^/]' \| \X"$file" : 'X\(//\)$' \| \X"$file" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X"$file" |sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{s//\1/q}/^X\(\/\/\)[^/].*/{s//\1/q}/^X\(\/\/\)$/{s//\1/q}/^X\(\/\).*/{s//\1/q}s/.*/./; q'`{ as_dir=$dirpart/$fdircase $as_dir in #(-*) as_dir=./$as_dir;;esactest -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {as_dirs=while :; docase $as_dir in #(*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(*) as_qdir=$as_dir;;esacas_dirs="'$as_qdir' $as_dirs"as_dir=`$as_dirname -- "$as_dir" ||$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \X"$as_dir" : 'X\(//\)[^/]' \| \X"$as_dir" : 'X\(//\)$' \| \X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||$as_echo X"$as_dir" |sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{s//\1/q}/^X\(\/\/\)[^/].*/{s//\1/q}/^X\(\/\/\)$/{s//\1/q}/^X\(\/\).*/{s//\1/q}s/.*/./; q'`test -d "$as_dir" && breakdonetest -z "$as_dirs" || eval "mkdir $as_dirs"} || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}{ (exit 1); exit 1; }; }; }# echo "creating $dirpart/$file"echo '# dummy' > "$dirpart/$file"donedone};;"libtool":C)# See if we are running on zsh, and set the options which allow our# commands through without removal of \ escapes.if test -n "${ZSH_VERSION+set}" ; thensetopt NO_GLOB_SUBSTficfgfile="${ofile}T"trap "$RM \"$cfgfile\"; exit 1" 1 2 15$RM "$cfgfile"cat <<_LT_EOF >> "$cfgfile"#! $SHELL# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:# NOTE: Changes made to this file will be lost: look at ltmain.sh.## Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,# 2006, 2007, 2008 Free Software Foundation, Inc.# Written by Gordon Matzigkeit, 1996## This file is part of GNU Libtool.## GNU Libtool is free software; you can redistribute it and/or# modify it under the terms of the GNU General Public License as# published by the Free Software Foundation; either version 2 of# the License, or (at your option) any later version.## As a special exception to the GNU General Public License,# if you distribute this file as part of a program or library that# is built using GNU Libtool, you may include this file under the# same distribution terms that you use for the rest of that program.## GNU Libtool is distributed in the hope that it will be useful,# but WITHOUT ANY WARRANTY; without even the implied warranty of# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the# GNU General Public License for more details.## You should have received a copy of the GNU General Public License# along with GNU Libtool; see the file COPYING. If not, a copy# can be downloaded from http://www.gnu.org/licenses/gpl.html, or# obtained by writing to the Free Software Foundation, Inc.,# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.# The names of the tagged configurations supported by this script.available_tags=""# ### BEGIN LIBTOOL CONFIG# Which release of libtool.m4 was used?macro_version=$macro_versionmacro_revision=$macro_revision# Whether or not to build shared libraries.build_libtool_libs=$enable_shared# Whether or not to build static libraries.build_old_libs=$enable_static# What type of objects to build.pic_mode=$pic_mode# Whether or not to optimize for fast installation.fast_install=$enable_fast_install# The host system.host_alias=$host_aliashost=$hosthost_os=$host_os# The build system.build_alias=$build_aliasbuild=$buildbuild_os=$build_os# A sed program that does not truncate output.SED=$lt_SED# Sed that helps us avoid accidentally triggering echo(1) options like -n.Xsed="\$SED -e 1s/^X//"# A grep program that handles long lines.GREP=$lt_GREP# An ERE matcher.EGREP=$lt_EGREP# A literal string matcher.FGREP=$lt_FGREP# A BSD- or MS-compatible name lister.NM=$lt_NM# Whether we need soft or hard links.LN_S=$lt_LN_S# What is the maximum length of a command?max_cmd_len=$max_cmd_len# Object file suffix (normally "o").objext=$ac_objext# Executable file suffix (normally "").exeext=$exeext# whether the shell understands "unset".lt_unset=$lt_unset# turn spaces into newlines.SP2NL=$lt_lt_SP2NL# turn newlines into spaces.NL2SP=$lt_lt_NL2SP# How to create reloadable object files.reload_flag=$lt_reload_flagreload_cmds=$lt_reload_cmds# An object symbol dumper.OBJDUMP=$lt_OBJDUMP# Method to check whether dependent libraries are shared objects.deplibs_check_method=$lt_deplibs_check_method# Command to use when deplibs_check_method == "file_magic".file_magic_cmd=$lt_file_magic_cmd# The archiver.AR=$lt_ARAR_FLAGS=$lt_AR_FLAGS# A symbol stripping program.STRIP=$lt_STRIP# Commands used to install an old-style archive.RANLIB=$lt_RANLIBold_postinstall_cmds=$lt_old_postinstall_cmdsold_postuninstall_cmds=$lt_old_postuninstall_cmds# A C compiler.LTCC=$lt_CC# LTCC compiler flags.LTCFLAGS=$lt_CFLAGS# Take the output of nm and produce a listing of raw symbols and C names.global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe# Transform the output of nm in a proper C declaration.global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl# Transform the output of nm in a C name address pair.global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address# Transform the output of nm in a C name address pair when lib prefix is needed.global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix# The name of the directory that contains temporary libtool files.objdir=$objdir# Shell to use when invoking shell scripts.SHELL=$lt_SHELL# An echo program that does not interpret backslashes.ECHO=$lt_ECHO# Used to examine libraries when file_magic_cmd begins with "file".MAGIC_CMD=$MAGIC_CMD# Must we lock files when doing compilation?need_locks=$lt_need_locks# Tool to manipulate archived DWARF debug symbol files on Mac OS X.DSYMUTIL=$lt_DSYMUTIL# Tool to change global to local symbols on Mac OS X.NMEDIT=$lt_NMEDIT# Tool to manipulate fat objects and archives on Mac OS X.LIPO=$lt_LIPO# ldd/readelf like tool for Mach-O binaries on Mac OS X.OTOOL=$lt_OTOOL# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.OTOOL64=$lt_OTOOL64# Old archive suffix (normally "a").libext=$libext# Shared library suffix (normally ".so").shrext_cmds=$lt_shrext_cmds# The commands to extract the exported symbol list from a shared archive.extract_expsyms_cmds=$lt_extract_expsyms_cmds# Variables whose values should be saved in libtool wrapper scripts and# restored at link time.variables_saved_for_relink=$lt_variables_saved_for_relink# Do we need the "lib" prefix for modules?need_lib_prefix=$need_lib_prefix# Do we need a version for libraries?need_version=$need_version# Library versioning type.version_type=$version_type# Shared library runtime path variable.runpath_var=$runpath_var# Shared library path variable.shlibpath_var=$shlibpath_var# Is shlibpath searched before the hard-coded library search path?shlibpath_overrides_runpath=$shlibpath_overrides_runpath# Format of library name prefix.libname_spec=$lt_libname_spec# List of archive names. First name is the real one, the rest are links.# The last name is the one that the linker finds with -lNAMElibrary_names_spec=$lt_library_names_spec# The coded name of the library, if different from the real name.soname_spec=$lt_soname_spec# Command to use after installation of a shared archive.postinstall_cmds=$lt_postinstall_cmds# Command to use after uninstallation of a shared archive.postuninstall_cmds=$lt_postuninstall_cmds# Commands used to finish a libtool library installation in a directory.finish_cmds=$lt_finish_cmds# As "finish_cmds", except a single script fragment to be evaled but# not shown.finish_eval=$lt_finish_eval# Whether we should hardcode library paths into libraries.hardcode_into_libs=$hardcode_into_libs# Compile-time system search path for libraries.sys_lib_search_path_spec=$lt_sys_lib_search_path_spec# Run-time system search path for libraries.sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec# Whether dlopen is supported.dlopen_support=$enable_dlopen# Whether dlopen of programs is supported.dlopen_self=$enable_dlopen_self# Whether dlopen of statically linked programs is supported.dlopen_self_static=$enable_dlopen_self_static# Commands to strip libraries.old_striplib=$lt_old_striplibstriplib=$lt_striplib# The linker used to build libraries.LD=$lt_LD# Commands used to build an old-style archive.old_archive_cmds=$lt_old_archive_cmds# A language specific compiler.CC=$lt_compiler# Is the compiler the GNU compiler?with_gcc=$GCC# Compiler flag to turn off builtin functions.no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag# How to pass a linker flag through the compiler.wl=$lt_lt_prog_compiler_wl# Additional compiler flags for building library objects.pic_flag=$lt_lt_prog_compiler_pic# Compiler flag to prevent dynamic linking.link_static_flag=$lt_lt_prog_compiler_static# Does compiler simultaneously support -c and -o options?compiler_c_o=$lt_lt_cv_prog_compiler_c_o# Whether or not to add -lc for building shared libraries.build_libtool_need_lc=$archive_cmds_need_lc# Whether or not to disallow shared libs when runtime libs are static.allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes# Compiler flag to allow reflexive dlopens.export_dynamic_flag_spec=$lt_export_dynamic_flag_spec# Compiler flag to generate shared objects directly from archives.whole_archive_flag_spec=$lt_whole_archive_flag_spec# Whether the compiler copes with passing no objects directly.compiler_needs_object=$lt_compiler_needs_object# Create an old-style archive from a shared archive.old_archive_from_new_cmds=$lt_old_archive_from_new_cmds# Create a temporary old-style archive to link instead of a shared archive.old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds# Commands used to build a shared archive.archive_cmds=$lt_archive_cmdsarchive_expsym_cmds=$lt_archive_expsym_cmds# Commands used to build a loadable module if different from building# a shared archive.module_cmds=$lt_module_cmdsmodule_expsym_cmds=$lt_module_expsym_cmds# Whether we are building with GNU ld or not.with_gnu_ld=$lt_with_gnu_ld# Flag that allows shared libraries with undefined symbols to be built.allow_undefined_flag=$lt_allow_undefined_flag# Flag that enforces no undefined symbols.no_undefined_flag=$lt_no_undefined_flag# Flag to hardcode \$libdir into a binary during linking.# This must work even if \$libdir does not existhardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec# If ld is used when linking, flag to hardcode \$libdir into a binary# during linking. This must work even if \$libdir does not exist.hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld# Whether we need a single "-rpath" flag with a separated argument.hardcode_libdir_separator=$lt_hardcode_libdir_separator# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes# DIR into the resulting binary.hardcode_direct=$hardcode_direct# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes# DIR into the resulting binary and the resulting library dependency is# "absolute",i.e impossible to change by setting \${shlibpath_var} if the# library is relocated.hardcode_direct_absolute=$hardcode_direct_absolute# Set to "yes" if using the -LDIR flag during linking hardcodes DIR# into the resulting binary.hardcode_minus_L=$hardcode_minus_L# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR# into the resulting binary.hardcode_shlibpath_var=$hardcode_shlibpath_var# Set to "yes" if building a shared library automatically hardcodes DIR# into the library and all subsequent libraries and executables linked# against it.hardcode_automatic=$hardcode_automatic# Set to yes if linker adds runtime paths of dependent libraries# to runtime path list.inherit_rpath=$inherit_rpath# Whether libtool must link a program against all its dependency libraries.link_all_deplibs=$link_all_deplibs# Fix the shell variable \$srcfile for the compiler.fix_srcfile_path=$lt_fix_srcfile_path# Set to "yes" if exported symbols are required.always_export_symbols=$always_export_symbols# The commands to list exported symbols.export_symbols_cmds=$lt_export_symbols_cmds# Symbols that should not be listed in the preloaded symbols.exclude_expsyms=$lt_exclude_expsyms# Symbols that must always be exported.include_expsyms=$lt_include_expsyms# Commands necessary for linking programs (against libraries) with templates.prelink_cmds=$lt_prelink_cmds# Specify filename containing input files.file_list_spec=$lt_file_list_spec# How to hardcode a shared library path into an executable.hardcode_action=$hardcode_action# ### END LIBTOOL CONFIG_LT_EOFcase $host_os inaix3*)cat <<\_LT_EOF >> "$cfgfile"# AIX sometimes has problems with the GCC collect2 program. For some# reason, if we set the COLLECT_NAMES environment variable, the problems# vanish in a puff of smoke.if test "X${COLLECT_NAMES+set}" != Xset; thenCOLLECT_NAMES=export COLLECT_NAMESfi_LT_EOF;;esacltmain="$ac_aux_dir/ltmain.sh"# We use sed instead of cat because bash on DJGPP gets confused if# if finds mixed CR/LF and LF-only lines. Since sed operates in# text mode, it properly converts lines to CR/LF. This bash problem# is reportedly fixed, but why not run on old versions too?sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \|| (rm -f "$cfgfile"; exit 1)case $xsi_shell inyes)cat << \_LT_EOF >> "$cfgfile"# func_dirname file append nondir_replacement# Compute the dirname of FILE. If nonempty, add APPEND to the result,# otherwise set result to NONDIR_REPLACEMENT.func_dirname (){case ${1} in*/*) func_dirname_result="${1%/*}${2}" ;;* ) func_dirname_result="${3}" ;;esac}# func_basename filefunc_basename (){func_basename_result="${1##*/}"}# func_dirname_and_basename file append nondir_replacement# perform func_basename and func_dirname in a single function# call:# dirname: Compute the dirname of FILE. If nonempty,# add APPEND to the result, otherwise set result# to NONDIR_REPLACEMENT.# value returned in "$func_dirname_result"# basename: Compute filename of FILE.# value retuned in "$func_basename_result"# Implementation must be kept synchronized with func_dirname# and func_basename. For efficiency, we do not delegate to# those functions but instead duplicate the functionality here.func_dirname_and_basename (){case ${1} in*/*) func_dirname_result="${1%/*}${2}" ;;* ) func_dirname_result="${3}" ;;esacfunc_basename_result="${1##*/}"}# func_stripname prefix suffix name# strip PREFIX and SUFFIX off of NAME.# PREFIX and SUFFIX must not contain globbing or regex special# characters, hashes, percent signs, but SUFFIX may contain a leading# dot (in which case that matches only a dot).func_stripname (){# pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are# positional parameters, so assign one to ordinary parameter first.func_stripname_result=${3}func_stripname_result=${func_stripname_result#"${1}"}func_stripname_result=${func_stripname_result%"${2}"}}# func_opt_splitfunc_opt_split (){func_opt_split_opt=${1%%=*}func_opt_split_arg=${1#*=}}# func_lo2o objectfunc_lo2o (){case ${1} in*.lo) func_lo2o_result=${1%.lo}.${objext} ;;*) func_lo2o_result=${1} ;;esac}# func_xform libobj-or-sourcefunc_xform (){func_xform_result=${1%.*}.lo}# func_arith arithmetic-term...func_arith (){func_arith_result=$(( $* ))}# func_len string# STRING may not start with a hyphen.func_len (){func_len_result=${#1}}_LT_EOF;;*) # Bourne compatible functions.cat << \_LT_EOF >> "$cfgfile"# func_dirname file append nondir_replacement# Compute the dirname of FILE. If nonempty, add APPEND to the result,# otherwise set result to NONDIR_REPLACEMENT.func_dirname (){# Extract subdirectory from the argument.func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`if test "X$func_dirname_result" = "X${1}"; thenfunc_dirname_result="${3}"elsefunc_dirname_result="$func_dirname_result${2}"fi}# func_basename filefunc_basename (){func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`}# func_stripname prefix suffix name# strip PREFIX and SUFFIX off of NAME.# PREFIX and SUFFIX must not contain globbing or regex special# characters, hashes, percent signs, but SUFFIX may contain a leading# dot (in which case that matches only a dot).# func_strip_suffix prefix namefunc_stripname (){case ${2} in.*) func_stripname_result=`$ECHO "X${3}" \| $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;*) func_stripname_result=`$ECHO "X${3}" \| $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;esac}# sed scripts:my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'my_sed_long_arg='1s/^-[^=]*=//'# func_opt_splitfunc_opt_split (){func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`}# func_lo2o objectfunc_lo2o (){func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`}# func_xform libobj-or-sourcefunc_xform (){func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`}# func_arith arithmetic-term...func_arith (){func_arith_result=`expr "$@"`}# func_len string# STRING may not start with a hyphen.func_len (){func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`}_LT_EOFesaccase $lt_shell_append inyes)cat << \_LT_EOF >> "$cfgfile"# func_append var value# Append VALUE to the end of shell variable VAR.func_append (){eval "$1+=\$2"}_LT_EOF;;*)cat << \_LT_EOF >> "$cfgfile"# func_append var value# Append VALUE to the end of shell variable VAR.func_append (){eval "$1=\$$1\$2"}_LT_EOF;;esacsed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \|| (rm -f "$cfgfile"; exit 1)mv -f "$cfgfile" "$ofile" ||(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")chmod +x "$ofile";;esacdone # for ac_tag{ (exit 0); exit 0; }