#include "C:\Users\Honza\Documents\pic\I2C_bat_cteni\main.h"

#define EEPROM_SDA  PIN_B0
#define EEPROM_SCL  PIN_B1
#use i2c(master, sda=EEPROM_SDA, scl=EEPROM_SCL)
#use rs232(baud=9600,parity=N,xmit=PIN_B3,rcv=PIN_B2,bits=8) //rcv TXD xmit RXD


void main()
{

   setup_adc_ports(NO_ANALOGS|VSS_VDD);
   setup_adc(ADC_CLOCK_DIV_2);
   setup_spi(SPI_SS_DISABLED);
   setup_timer_0(RTCC_INTERNAL|RTCC_DIV_1);
   setup_timer_1(T1_DISABLED);
   setup_timer_2(T2_DISABLED,0,1);
   setup_ccp1(CCP_OFF);
   setup_comparator(NC_NC_NC_NC);// This device COMP currently not supported by the PICWizard

printf("Simple Thermomether  \r\n",);
unsigned int8 STAV1,STAV2;

unsigned int16 SOUCET, SOUCET1;
unsigned int8 LSB;
//unsigned int8  
  
  //while(TRUE)
 //{ 
   
   


   i2c_start(); //blockdatacontrol
   I2C_Write(0xAA);
   I2C_write(0x61);
   i2c_start();
   I2C_Write(0xAA);
   i2c_write(0x00);
   i2c_stop(); 
   delay_ms (1);


   i2c_start();//dataflashclass 
   I2C_Write(0xAA);
   I2C_write(0x3e);
   
   i2c_start();
   I2C_Write(0xAA);
   i2c_write(0x40);
   i2c_stop(); 
   delay_ms (1);
 
 
  i2c_start();//dataflashblock
   I2C_Write(0xAA);
   I2C_write(0x3f);
   
   i2c_start();
   I2C_Write(0xAA);
   I2C_write(0x00);
   i2c_stop(); 
 
 delay_ms (1);








int i=64;
SOUCET=0;
 for (i=64;i<=96;++i)
{
   printf("%u\r\n",i);
      i2c_stop(); 
      
   i2c_start();//blockdata
   I2C_Write(0xAA);
   I2C_write(i);
  
   i2c_start();
   I2C_Write(0xAB);
   STAV1=I2C_read(0);
   i2c_stop();   
           
   printf("STAV %lX \r\n", STAV1);   
   SOUCET=SOUCET+STAV1;
  
   
   
   
   
} 
SOUCET1=SOUCET;
SOUCET1=SOUCET1>>8;
printf("Deleno 256: %lX (procenta)\r\n", SOUCET1);
SOUCET1=SOUCET-SOUCET1;
printf("Soucet - soucet/256: %lX \r\n", SOUCET1);
LSB=(unsigned int8)SOUCET1; 
printf("LSB: %lX\r\n", LSB);
//printf("Stav: %X (procenta)\r\n", STAV2);




delay_ms (100);
 }