#include "C:\Users\Honza\Documents\pic\serio_tlak\pic\main.h"



/**** Automatic weather station 01A ****/
#define VERSION "0.1"

#define ID "$Id: main.c 2858 2013-03-22 16:04:13Z kaklik $"
#include <string.h>
#use rs232(baud=9600,parity=N,xmit=PIN_B7,rcv=PIN_B6,bits=8) //rcv TXD xmit RXD

#CASE    // Case sensitive compiler

#define  SEND_DELAY     50       // Time between two characters on RS232

#define CSN_SPI PIN_C2        // preassure sensor connection
#include "..\MPL115A1.c"

void welcome(void)               // Welcome message
{
   char  REV[50]=ID;       // Buffer for concatenate of a version string

   if (REV[strlen(REV)-1]=='$') REV[strlen(REV)-1]=0;
   
   printf("# ver seq  temp[mK] hum_temp[mK] hum[%%] ");
   printf("bar_temp[mK] pressure[hPa]  Anemo[pls/s]check\r\n\r\n");
}

void main()
{


   setup_oscillator(OSC_8MHZ);       // pri prouziti bootloaderu neni treba nastavovat
   setup_wdt(WDT_2304MS);
   restart_wdt();  //---WDT
   setup_adc_ports(NO_ANALOGS|VSS_VDD);
   setup_adc(ADC_CLOCK_DIV_2);
   setup_timer_0(RTCC_EXT_L_TO_H|RTCC_DIV_1);
//   setup_timer_1(T1_EXTERNAL|T1_DIV_BY_1);//|T1_CLK_OUT);
   setup_timer_1(T1_INTERNAL|T1_DIV_BY_8);
   setup_timer_2(T2_DISABLED,0,1);
   setup_ccp1(CCP_OFF);
   setup_comparator(NC_NC_NC_NC);      // This device COMP currently not supported by the PICWizard
   //setup_spi(SPI_MASTER | SPI_MODE_0 | SPI_CLK_DIV_64);
   output_high(CSN_SPI);

   welcome();   // welcome print and device indentification
  

}